Total Standards : 114
Revised Standards
New Standards
S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
---|---|---|---|---|---|---|
1 | IS 5939 : 1970 |
Specification for single angle sine tables | 0 | Mar, 2017 | Download | |
2 | IS 9610 : 1985 (1 Revision) |
Specification for go and no go screw ring gauges for ISO metric screw threads (Size range from M1 up to and including M100) (First Revision) | 0 | Jan, 2020 | Download | |
3 | IS 2103 : 1980 (2 Revision) |
SPECIFICATION FOR ENGINEER - SQUARES ( Second Revision ) | 0 | Mar, 2017 | Download | |
4 | IS 6246 : 1980 (1 Revision) |
Specification for gauging members for plain plug gauges go and no go members (Size Range Above 120 Up To And Including 250 mm) (First Revision) | 1 | Mar, 2017 | Download | |
5 | IS 11103 : 1984 |
Specification for cylindrical measuring pins (Size Range From 0.1 mm up to and including 20 mm) | 0 | Jan, 2020 | Download | |
6 | IS 16225 : Part 2 : 2014/ISO 12180-2 : 2011 |
Geometrical product specifications (GPS) - Cylindricity: Part 2 specification operators | 0 | Jan, 2020 | Buy | |
7 | IS 2967 : 1983 (1 Revision) |
Specification for external micrometer (First Revision) | 0 | Feb, 2019 | Buy | |
8 | IS 16491 : Part 2 : 2016/ISO 13385-2 |
Geometrical product specifications (GPS) - Dimensional measuring equipment: Part 2 caliper depth gauges; design and metrological characteristics | 0 | Mar, 2021 | Buy | |
9 | IS 4210 : 1967 |
Specification for strip feeler gauges for electrical purposes | 1 | Feb, 2019 | Download | |
10 | IS 7018 : Part 3 : 1983 (1 Revision) |
Technical supply conditions for gauges: Part 3 assembly and identification of screw plug gauges for ISO metric screw threads (Size Range Form M1 Upto And Including M200) (First Revision) | 1 | Feb, 2019 | Download | |
11 | IS 15261 : 2002/ISO 3274 : 1996 |
Geometrical product specifications (GPS) - surface texture : profile method - Nominal characteristics of contact (Stylus) instruments | 0 | Aug, 2023 | Buy | |
12 | IS 5268 : Part 1 : 1991 (1 Revision) |
Engineering metrology - Straightedges: Part 1 cast iron straightedges (bow shaped or camel back type and 1-Section or parallel type) (First Revision) | 1 | Mar, 2017 | Download | |
13 | IS 8999 : 2003/ISO 7-2 : 2000 (1 Revision) |
Pipe threads where pressure - Tight joints are made on the threads - Verification by means of limit gauges (First Revision) | 0 | Aug, 2023 | Buy | |
14 | IS 15635 : Part 1 : 2006/ISO 10360-1 : 2000 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 1 vocabulary | 0 | Mar, 2017 | Buy | |
15 | IS 6137 : 1983 (2 Revision) |
Specification for gauging members for plain plug gauges, go and no go members (Size Range From 1 Up to and Including 40 Mm) (Second Revision) | 0 | Feb, 2019 | Download | |
16 | IS 4966 : Part 2 : 1969 |
Specification for gauges for serrations: Part 2 for gauging internal serrations | 0 | Feb, 2019 | Download | |
17 | IS 2334 : 2001/ISO 1502 : 1996 (2 Revision) |
ISO general purpose metric screw threads - Gauges and gauging (Second Revision) | 0 | Aug, 2023 | Buy | |
18 | IS 3455 : 1971 (1 Revision) |
Gauging practice for plain workpieces (First Revision) | 4 | Jan, 2020 | Buy | |
19 | IS 6985 : 1973 |
Specification for precision box angle plates | 0 | Jan, 2020 | Download | |
20 | IS 12257 : Part 4 : 1992 |
Pneumatic measurement - Specification: Part 4 general information and examples of application | 0 | Mar, 2017 | Download | |
21 | IS 15635 : Part 7 : 2019/ISO 10360-7 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 7 CMMs equipped with imaging probing systems | 0 | Aug, 2023 | Buy | |
22 | IS 18432 : Part 3 : 2023/ISO 21920-3:2021 |
Geometrical product specifications GPS Surface texture: Profile: Part 3 Specification operators | 0 | ---- | Buy | |
23 | IS 4440 : 1996 (1 Revision) |
Engineering metrology - Precision equipment - Slip gauge accessories (First Revision) | 0 | Feb, 2019 | Download | |
24 | IS 7606 : 1982 (1 Revision) |
Specification for plain adjustable snap gauges (First Revision) | 0 | Mar, 2017 | Download | |
25 | IS 15374 : 2003/ISO 4292 : 1985 |
Methods for the assessment of departure from roundness - Measurement by twoand three - Point methods | 0 | Feb, 2019 | Buy | |
26 | IS 5440 : 1969 |
Specification for optical flats | 1 | Jan, 2020 | Download | |
27 | IS 9608 : 1985 (1 Revision) |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (Size range above M40 up to and Including M120) (First Revision) | 0 | Jan, 2020 | Download | |
28 | IS 2092 : 1983 (1 Revision) |
Specification for plunger type dial gauges (First Revision) | 1 | Feb, 2019 | Buy | |
29 | IS 6244 : 1980 (1 Revision) |
Specification for gauging members for plain plug gauges go and no go members (Size Range Above 40 To 120 mm) (First Revision) | 1 | Mar, 2017 | Download | |
30 | IS 10685 : 1983 |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (Size Range Above M120 up to and including M200) | 0 | Feb, 2019 | Download | |
31 | IS 16225 : Part 1 : 2014/ISO 12180-1 : 2011 |
Geometrical product specifications (GPS) - Cylindricity: Part 1 vocabulary and parameters of cylindrical form | 0 | Jan, 2020 | Buy | |
32 | IS 2966 : 1964 |
Specification for internal micrometers (Including Stick Micrometers) | 1 | Feb, 2019 | Download | |
33 | IS 16491 : Part 1 : 2016/ISO 13385-1 |
Geometrical product specifications (GPS) - Dimensional measuring equipment: Part 1 calipers; design and metrological characteristics | 0 | Mar, 2021 | Buy | |
34 | IS 3512 : 1966 |
Specification for Toolmakers Straightedges | 1 | Feb, 2019 | Download | |
35 | IS 7018 : Part 2 : 1983 (1 Revision) |
Technical supply conditions for gauges: Part 2 assembly and identification of plain plug gauges (Size Range From 1 Mm Up To And Including 250 Mm) (First Revision) | 0 | Feb, 2019 | Download | |
36 | IS 14271 : 1995 |
Engineering metrology - Dial snap gauges - Specification | 0 | Jan, 2020 | Download | |
37 | IS 4966 : Part 1 : 1969 |
Specification for gauges for serrations: Part 1 for gauging external serrations | 0 | Feb, 2019 | Download | |
38 | IS 8823 : 1978 |
Specification for triangular straightedges | 0 | Jan, 2020 | Download | |
39 | IS 15423 : Part 2 : 2003/ISO 5436-2 : 2001 |
Geometrical product specifications (GPS) - Surface texture: profile method measurement standards: Part 2 software measurement standards | 0 | Feb, 2019 | Buy | |
40 | IS 5980 : 1978 (1 Revision) |
Specification for bench centres (Firsf Revision) | 0 | Jan, 2020 | Download | |
41 | IS 15371 : Part 2 : 2018/ISO 14253-2:2011 (1 Revision) |
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment: Part 2 guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (First Revision) | 1 | Mar, 2023 | Buy | |
42 | IS 2285 : 2003/ISO 8512-1 : 1990 (3 Revision) |
Engineering metrology - Measuring equipment - Cast iron surface plates - Specification (Third Revision) | 0 | Jan, 2020 | Buy | |
43 | IS 6973 : 1973 |
Specification for precision angle plates | 0 | Jan, 2020 | Download | |
44 | IS 12257 : Part 3 : 1992 |
Pneumatic measurement: Part 3 parameters of instruments working on high pressure | 0 | Mar, 2017 | Download | |
45 | IS 16300 : 2014/ISO/TR 16015 : 2003 |
Geometrical product specifications (GPS) - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influence | 0 | Jan, 2020 | Buy | |
46 | IS 3179 : 1990 (2 Revision) |
Engineering metrology - Feeler gauges (second revision) | 0 | Jan, 2020 | Download | |
47 | IS 16748 : 2018/ISO 13102 : 2012 |
Geometrical Product Specifications (GPS)-Dimensional Measuring Equipment Electronic Digital-Indicator Gauge-Design and Metrological Characteristics | 0 | Mar, 2023 | Buy | |
48 | IS 4349 : 1987 (1 Revision) |
Specification for cylindrical setting masters (First Revision) | 0 | Feb, 2019 | Download | |
49 | IS 7604 : 1975 |
Specification for length bar accessories | 0 | Mar, 2017 | Download | |
50 | IS 15373 : 2003/ISO 4291 : 1985 |
Method for the assessment of departure from roundness - Measurement of variations in radius | 0 | Aug, 2023 | Buy | |
51 | IS 5388 : 1983 (2 Revision) |
Specification for hexagon handles for plain and threaded plug gauges (Second Revision) | 1 | Feb, 2019 | Download | |
52 | IS 9529 : 1980 |
Specification for taper plug gauges and taper ring gauges to check taper bore of gauge handles and taper shanks of gauging members | 0 | Mar, 2017 | Download | |
53 | IS 15635 : Part 6 : 2006/ISO 10360-6 : 2001 |
Geometrical product specifications (GPS) - acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6 estimation of errors in computing gaussian associated features | 1 | Mar, 2021 | Buy | |
54 | IS 6232 : 1971 |
Specification for cast iron box angle plates | 1 | Feb, 2019 | Download | |
55 | IS 10649 : 1983 |
Specification for ring gauges for drill chuck taper arbors of morse taper and jacob taper type | 0 | Feb, 2019 | Download | |
56 | IS 16224 : Part 2 : 2014/ISO 12780-2 : 2011 |
Geometrical product specifications (GPS) - Straightness: Part 2 specification operators | 0 | Jan, 2020 | Buy | |
57 | IS 2949 : 1992 (2 Revision) |
Engineering metrology - Plain V - Blocks for inspection purposes - Specification (Second Revision) | 0 | Mar, 2017 | Download | |
58 | IS 3510 : 1990 (1 Revision) |
Engineering Metrology - Toolmaker Flats - Specification ( First Revision ) | 0 | Jan, 2020 | Download | |
59 | IS 7018 : Part 1 : 1983 (1 Revision) |
Technical supply conditions for gauges: part 1 general (First Revision) | 0 | Feb, 2019 | Download | |
60 | IS 13907 : 1994/ISO 7863 : 1984 |
Height setting micrometers and rising blocks - Specification | 0 | Jan, 2020 | Buy | |
61 | IS 16294 : Part 2 : 2016/ISO 12781-2:2011 |
Geometrical product specifications (GPS) - Flatness: Part 2 specification operators | 0 | Mar, 2021 | Buy | |
62 | IS 4960 : 1968 |
Specification for universal and elongated type V - Blocks | 0 | Jan, 2020 | Download | |
63 | IS 8023 : 1991 (1 Revision) |
Gauges - Single ended progressive type plate snap gauges (Up to 160 mm) - Specification (First Revision) | 0 | Jan, 2020 | Download | |
64 | IS 15423 : Part 1 : 2003/ISO 5436-1 : 2000 |
Geometrical product specifications (GPS) - Surface texture: profile method measurement standards: Part 1 material measures | 0 | Aug, 2023 | Buy | |
65 | IS 5979 : 1981 (1 Revision) |
Specification for sine centres (First Revision) | 0 | Mar, 2017 | Download | |
66 | SP 19 : 1980 |
Guidelines for classification of quality of scraped surfaces | 0 | Mar, 2021 | Download | |
67 | IS 2251 : 1986 (1 Revision) |
Specification for plug and ring gauges for self holding tapers (First Revision) | 0 | Mar, 2017 | Download | |
68 | IS 6952 : 1990 (1 Revision) |
Engineering metrology - Cylindrical squares - Specification (First Revision) | 0 | Mar, 2017 | Download | |
69 | IS 12257 : Part 2 : 1992 |
Pneumatic measurement: Part 2 design features of instruments working in high pressure range | 0 | Mar, 2017 | Download | |
70 | IS 16226 : Part 2 : 2014/ISO 12181-2 : 2011 |
Geometrical product specifications (GPS) - Roundness: Part 2 specification operators | 0 | Jan, 2020 | Buy | |
71 | IS 3073 : 1967 |
Assessment of surface roughness | 4 | Mar, 2021 | Download | |
72 | IS 15371 : Part 4 : 2018/ISO/TS 14253-4 ; 2010 |
Geometrical Product Specifications (GPS)-Inspection by Measurement of Workpieces and Measuring Equipment Part 4 Background on functional Limits and Specification Limits in Decision Rules | 0 | Mar, 2023 | Buy | |
73 | IS 4241 : 1990 (1 Revision) |
Engineering metrology - Engineer Parallels - Specification ( First Revision ) | 0 | Jan, 2020 | Download | |
74 | IS 7599 : Part 1 : 1975 |
General requirements for engineer's comparators with stands:Part I engineer's comparators | 0 | Mar, 2017 | Download | |
75 | IS 15371 : Part 3 : 2018/ISO 14253-3 : 2011 (1 Revision) |
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment: Part 3 guidelines for achieving agreements on measurement uncertainty statements (First Revision) | 0 | Mar, 2023 | Buy | |
76 | IS 5359 : 1987 (1 Revision) |
Specification for sine bars (First Revision) | 0 | Feb, 2019 | Download | |
77 | IS 9483 : 1993 (1 Revision) |
Measuring instruments - Micrometer heads - Specification (First Revision) | 0 | Jan, 2020 | Download | |
78 | IS 15635 : Part 3 : 2006/ISO 10360-3 : 2000 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 3 CMMs with the axis of a rotary table as the fourth axis | 0 | Mar, 2017 | Buy | |
79 | IS 6231 : 1971 |
Specification for prismatic angle gauges | 0 | Feb, 2019 | Download | |
80 | IS 10275 : 1982 |
Methods For Assessment of circularity Error From Polar Graphs Obtained By Using Stylus-Type Form-Measuring Instrument | 0 | Mar, 2017 | Download | |
81 | IS 16224 : Part 1 : 2014/ISO 12780-1 : 2011 |
Geometrical Product Specifications (GPS) - Straightness Part 1 Vocabulary and Parameters of Straightness | 0 | Jan, 2020 | Buy | |
82 | IS 2921 : 2016/ISO 13225 (2 Revision) |
Geometrical product specifications (GPS) - Dimensional measuring equipment; height gauges - Design and metrological characteristics (Second Revision) | 0 | Mar, 2021 | Buy | |
83 | IS 3485 : 1983 (2 Revision) |
Specification for plain and master setting ring gauges (Size Range From 1 Up To And Including 315 Mm) (Second Revision) | 1 | Feb, 2019 | Download | |
84 | IS 7014 : 1973 |
Specification for length bars | 1 | Jan, 2020 | Download | |
85 | IS 12937 : 1990 |
Engineering metrology - Methods of testing straightness, flatness and perpendicularity | 1 | Jan, 2020 | Download | |
86 | IS 15635 : Part 9 : 2019/ISO 10360-9 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS): Part 9 CMMs with multiple probing systems | 0 | Aug, 2023 | Buy | |
87 | IS 4563 : 1987 (1 Revision) |
Specification for block squares (First Revision) | 0 | Feb, 2019 | Download | |
88 | IS 7876 : 1975 |
Gauge allowances and manufacturing tolerances for plain gauges for outside measurements for ISO fit sizes (Nominal Size Up To 500 mm) | 0 | Jan, 2020 | Download | |
89 | IS 15422 : 2003/ISO 12085 : 1996 |
Geoivietrical product specifications (GPS) - Surface texture: profile method - motif parameters | 0 | Aug, 2023 | Buy | |
90 | IS 5943 : 1970 |
Specification for compound angle sine tables | 0 | Mar, 2017 | Download | |
91 | IS 9631 : 1983 (1 Revision) |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (Size Range From M1 up to and Including M40) (First Revision) | 1 | Feb, 2019 | Download | |
92 | IS 2220 : 1990 (1 Revision) |
Engineering metrology - Steel straightedges - Specification (First Revision) | 0 | Jan, 2020 | Download | |
93 | IS 6311 : 1978 (1 Revision) |
Specification for ISO metric screwthread measuring cylinders (First Revision) | 1 | Jan, 2020 | Download | |
94 | IS 12257 : Part 1 : 1987 |
Specification for pneumatic length measurement comparators: Part 1 general information on principles and methods | 1 | Mar, 2017 | Download | |
95 | IS 16226 : Part 1 : 2014/ISO 12181-1 : 2011 |
Geometrical product specifications (GPS) - Roundness: Part 1 vocabulary and parameters of roundness | 0 | Jan, 2020 | Buy | |
96 | IS 2984 : 2003/ISO 3650 : 1998 (2 Revision) |
Slip gauges - Specification [ISO title : geometrical product specifications (GPS) - length standards : gauge blocks] (Second Revision) | 0 | Feb, 2019 | Buy | |
97 | IS 15371 : Part 6 : 2018/14253-6 : 2012 |
Geometrical Product Specifications (GPS) - Inspection by Measurement of Workpieces and Measuring Equipment Part 6 Generalized Decision Rules for the Acceptance and Rejection of Instruments and Workpieces | 0 | Mar, 2023 | Buy | |
98 | IS 4211 : 1993 (1 Revision) |
Gauges - Thread pitch gauges for ISO metric screw threads (Pitch Range 0.4 To 6 Mm) - Specification (First Revision) | 0 | Feb, 2019 | Download | |
99 | IS 7327 : 2003/ISO 8512-2 : 1990 (2 Revision) |
Engineering metrology - Measuring equipment - Granite surface plates - Specification (Second Revision) | 0 | Aug, 2023 | Buy | |
100 | IS 15264 : 2002/ISO 8785 : 1998 |
Geometrical product specification (GPS) - surface imperfections - Terms, definitions and parameters | 0 | Aug, 2023 | Buy | |
101 | IS 5273 : 1969 |
Specification for radius gauges | 2 | Feb, 2019 | Download | |
102 | IS 9475 : 1986 (1 Revision) |
Specification for plug and ring gauges for self release 7/24 tapers (First Revision) | 0 | Mar, 2017 | Download | |
103 | IS 15635 : Part 2 : 2014/ISO 10360-2 : 2009 (1 Revision) |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 2 CMMs used for measuring linear dimensions (First Revision) | 0 | Mar, 2021 | Buy | |
104 | IS 6150 : 1971 |
Specification for ISO metric screw thread measuring prisms | 1 | Feb, 2019 | Download | |
105 | IS 10216 : 1988/ISO 228-2 : 1987 (1 Revision) |
Pipe threads where pressure - Tight joints are not made on the threads - Verification by means of limit gauges (First Revision) | 0 | Jan, 2020 | Buy | |
106 | IS 7599 : Part 2 : 1975 |
General Requirements for Engineer's Comparators With Stand - Part II : Comparator Standard | 0 | Mar, 2017 | Download | |
107 | IS 2554 : 1971 (1 Revision) |
Specification for cast iron angle plates (First Revision) | 1 | Jan, 2020 | Download | |
108 | IS 3455 : Part 1 : 1985 (1 Revision) |
Gauging practice for plain workpieces: Part 1 inspection of plain workpieces with indicative measuring instruments | 1 | Jan, 2020 | Buy | |
109 | IS 6987 : 1973 |
Specification for steel precision polygons | 0 | Jan, 2020 | Download | |
110 | IS 12257 : Part 5 : 1996 |
Pneumatic measurement: Part 5 glossary of terms and definition | 0 | Mar, 2017 | Download | |
111 | IS 15635 : Part 8 : 2019/ISO 10360-8 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS): Part 8 CMMs equipped with optical distance sensors | 0 | Aug, 2023 | Buy | |
112 | IS 4492 : 1968 |
Specification for welded V - Blocks (Diameter Range 300 To 2000 Mm) | 1 | Feb, 2019 | Download | |
113 | IS 7859 : 1975 |
Gauge allowances and manufacturing tolerances for plain gauges for inside measurements for ISO fit sizes (Nominal Size Up To 500 mm) | 0 | Jan, 2020 | Download | |
114 | IS 15421 : Part 1 : 2003/ISO 13565-1 : 1996 |
Geometrical product specifications (GPS) - Surface texture: profile method - surfaces having stratified functional properties: Part 1 filtering and general measurement conditions | 0 | Aug, 2023 | Buy |