Total Standards : 282
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS 13244 : 1991 |
Half side and face cutters with indexable inserts -- Specification | 0 | Jan, 2021 | Download | |
| 2 | IS/ISO 7388 : Part 3 : 2007/ISO 7388-3 : 2007 |
Tool shanks with 7/24 taper for automatic tool changers: Part 3 Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF | 0 | Nov, 2018 | Buy | |
| 3 | IS 7823 : 2005/ISO 3292 (2 Revision) |
Twist drills -- Extra-long parallel shank -- Specification (second revision) | 0 | Jan, 2021 | Buy | |
| 4 | IS 5703 : 1988 (1 Revision) |
Specification for countersinks 90° with morse taper shanks and detachable pilots (first revision) | 0 | Nov, 2018 | Buy | |
| 5 | IS/ISO 5604 : Part 4 : 2012/ISO 5609-4 : 2012 |
Tool holders for internal turning with cylindrical shank for indexable inserts: Part 4 Style L | 0 | Apr, 2021 | Buy | |
| 6 | IS 15091 : Part 2 : 2004/ISO 9361-2:2011 |
Indexable inserts for cutting tools -- Ceramic inserts with rounded corners: Part 2 dimensions of inserts with cylindrical fixing hole | 0 | Jan, 2021 | Buy | |
| 7 | IS 11938 : 1987 |
Specification for tool adaptors for numerically controlled machine tools (Tool rotating type) | 1 | Nov, 2018 | Download | |
| 8 | IS 16637 : Part 10 : 2018/ISO 5610-10:2010 |
Tool Holders with rectangular shank for Indexable Inserts: Part 10 Style N | 0 | Jun, 2023 | Buy | |
| 9 | IS 6324 : 1971 |
Specification for single angle milling cutters | 0 | Nov, 2018 | Download | |
| 10 | IS 13741 : Part 7 : 1993 |
Carbide tips: Part 7 Carbide tips for single point round nose turning tools -- Speciification | 0 | Nov, 2018 | Download | |
| 11 | IS 10571 : 1983 |
Specification for split taper sockets for tools with parallel shank, driving square and driving tenon | 0 | Nov, 2018 | Download | |
| 12 | IS 8620 : 1993 (1 Revision) |
Clamping nuts for milling arbors specification (first revision) | 0 | Jun, 2023 | Buy | |
| 13 | IS 5926 : 1970 |
Specification for shell reamers | 2 | Nov, 2018 | Buy | |
| 14 | IS 2340 : 1972 (1 Revision) |
Dimensions for self-release 7/24 tapers for milling arbor and tool shanks (first revision) | 2 | Jan, 2021 | Buy | |
| 15 | IS 11943 : Part 7 : 1987 |
Specification for hard metal burrs: Part 7 Arch pointed nose burrs (Type G) | 0 | Nov, 2018 | Buy | |
| 16 | IS 17023 : 2018/ISO 16462 : 2014 |
Cubic boron nitride inserts, tipped or solid -- Dimensions, types | 0 | Jun, 2023 | Buy | |
| 17 | IS 6551 : 1992 (1 Revision) |
Thread milling cutters with morse taper shanks -- Specification (first revision) | 3 | Nov, 2018 | Download | |
| 18 | IS 5360 : 1969 |
Dimensions for driving tenons | 0 | Nov, 2018 | Download | |
| 19 | IS 14867 : Part 4 : 2019/ISO 5611-4 |
Cartridges, type A, for indexable inserts: Part 4 Style J | 0 | Jun, 2023 | Buy | |
| 20 | IS 13742 : Part 9 : 1993 |
Carbide tipped single point tools -- ISO series: Part 9 Boring and facing tool (ISO 9) -- Specification | 1 | Nov, 2018 | Download | |
| 21 | IS 11127 : 1984 |
Specification for holders for knurling wheels | 0 | Jan, 2021 | Download | |
| 22 | IS 9325 : 1996 (1 Revision) |
Carbide tipped slot drills with parallel shanks -- Specification (first Revision) | 0 | Nov, 2018 | Download | |
| 23 | IS 6175 : Part 4 : 1991 |
Screwing taps: Part 4 Long shank machine screwing taps for ISO metric screw threads sizes from m3 to m24 -- Specification | 2 | Nov, 2018 | Buy | |
| 24 | IS 4022 : 1996/ISO 883 : 1985 (2 Revision) |
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole -- Dimensions (second revision) | 0 | Jan, 2021 | Buy | |
| 25 | IS 12324 : 1988 |
Specification for hexagonal die nuts | 0 | Nov, 2018 | Buy | |
| 26 | IS 14867 : Part 2 : 2019/ISO 5611-4 |
Cartridges, type A, for indexable inserts: Part 2 Style F | 0 | Jun, 2023 | Buy | |
| 27 | IS 7772 : 1975 |
Specification for shell core drills | 1 | Nov, 2018 | Buy | |
| 28 | IS 12690 : 1989 |
Small Tools -- Subland twist drills with morse taper shank for clearance holes and counterbores for slotted cheese head screws -- Specification | 1 | Nov, 2018 | Download | |
| 29 | IS 9897 : 2013/ISO 1832 : 2004 (3 Revision) |
Indexable inserts for cutting tools -- Designation (third revision) | 0 | Nov, 2018 | Buy | |
| 30 | IS 7778 : Part 6 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 6 Milling arbors and accessories (first revision) | 0 | Nov, 2018 | Download | |
| 31 | IS 5447 : 2017 (2 Revision) |
Machine chucking reamers with morse taper shank -- Specification (second revision) | 0 | ---- | Buy | |
| 32 | IS 16435 : 2017 |
Solid carbide end mills with stepped parallel shank -- Specification | 0 | ---- | Buy | |
| 33 | IS 14865 : 2001/ISO 5609 : 1998 |
Boring bars for indexable inserts -- Dimensions | 0 | Jan, 2021 | Buy | |
| 34 | IS 11835 : Part 2 : 2004/ISO 5414-2 : 2002 (1 Revision) |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools: Part 2 Connecting dimensions of chucks and designation (first revision) | 0 | Jan, 2021 | Buy | |
| 35 | IS 16637 : Part 2 : 2018/ISO 5610-2 : 2010 |
Tool holders with rectangular shank for indexable inserts: Part 2 Style A | 0 | Jun, 2023 | Buy | |
| 36 | IS 6309 : 1982 (1 Revision) |
Specification for cylindrical milling cutters (first revision) | 1 | Nov, 2018 | Buy | |
| 37 | IS 5102 : 1969 |
Specification for twist drills, parallel shank, long series | 5 | Nov, 2018 | Buy | |
| 38 | IS 13741 : Part 2 : 1993 |
Carbide tips: Part 2 Carbide tips for single point tools for light cutting operations -- Specification | 0 | Nov, 2018 | Download | |
| 39 | IS 10255 : 1982 |
Specification for tapered die-sinking cutters with parallel shanks | 0 | Nov, 2018 | Buy | |
| 40 | IS 8405 : 2005 |
Thread rolling cylindrical dies -- Specification (first revision) | 0 | Nov, 2018 | Download | |
| 41 | IS 5881 : 1984 (1 Revision) |
Specification for taper pin hand reamers (first revision) | 1 | Jan, 2021 | Buy | |
| 42 | IS 15762 : 2007/ISO 5413 : 1993 |
Machine tools -- Positive drive of morse tapers | 0 | Sep, 2017 | Buy | |
| 43 | IS 11943 : Part 2 : 1987 |
Specification for hard metal burrs: Part 2 Cylindrical burrs (Type A) | 0 | Nov, 2018 | Buy | |
| 44 | IS 16637 : Part 13 : 2018/ISO 5610-13:2010 |
Tool holders with rectangular shank for indexable inserts: Part 13 Style T | 0 | ---- | Buy | |
| 45 | IS 6353 : 2014 (2 Revision) |
End mills with parallel shank -- Specification (second revision) | 0 | Dec, 2019 | Buy | |
| 46 | IS 13742 : Part 4 : 1993 |
Carbide tipped single point tools -- ISO series: Part 4 Broad turning tool (ISO 4) -- Specification | 0 | Nov, 2018 | Download | |
| 47 | IS 10884 : 1984 |
Specification for carbide tipped chucking reamers with parallel shanks | 2 | Dec, 2022 | Download | |
| 48 | IS 8842 : 1978 |
Specification for high speed steel butt - Welded single point planing tools | 1 | Nov, 2018 | Download | |
| 49 | IS 6173 : Part 1 : 1992 (1 Revision) |
Screwing taps -- Dimensions and tolerances on threaded portion: Part 1 For ISO metric screw threads (first revision) | 1 | Nov, 2018 | Buy | |
| 50 | IS 2669 : 1971 (1 Revision) |
Specification for woodruff keyslot milling cutters with parallel shank (first revision) | 1 | Nov, 2018 | Buy | |
| 51 | IS 11950 : 1987 |
Specification for tool adaptors for numerically controlled machine tools (Tool stationary type) | 0 | Nov, 2018 | Download | |
| 52 | IS 17027 : 2018/ISO 16463 : 2014 |
Polycrystalline diamond inserts, tipped -- Dimensions, types | 0 | Jun, 2023 | Buy | |
| 53 | IS 6708 : 1977 (1 Revision) |
Specification for centre drills type A (first revision) | 0 | Nov, 2018 | Buy | |
| 54 | IS 7778 : Part 11 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 11 Hard metal burrs (first revision) | 0 | Nov, 2018 | Download | |
| 55 | IS 5365 : 1991 (2 Revision) |
Core drills, parallel shanks -- Specification (second revision ) | 0 | Nov, 2018 | Buy | |
| 56 | IS 14867 : Part 8 : 2019/ISO 5611-8 : 2015 |
Cartridges, type A, for indexable inserts: Part 8 Style S | 0 | Jun, 2023 | Buy | |
| 57 | IS 14168 : 2017/ISO 6986:2013 |
Side and face milling (Slotting) cutters with indexable inserts -- Dimensions (first revision) | 0 | ---- | Buy | |
| 58 | IS 11522 : Part 1 : 1986/ISO 3002-1 : 1982 |
Recommendations for basic quantities in cutting and grinding: Part 1 Geometry of the active part of cutting tools, general terms, reference systems, tool and working angles and chip breakers | 0 | Nov, 2018 | Buy | |
| 59 | IS 11835 : Part 1 : 2005 |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools: Part 1 Dimensions of the driving system of tool shanks (first revision) | 0 | Jan, 2021 | Buy | |
| 60 | IS 6175 : Part 8 : 1992 |
Screwing taps: Part 8 Screwing taps for pipe threads taper rc series -- Specification | 1 | Nov, 2018 | Buy | |
| 61 | IS 5030 : Part 2 : 2016/ISO 4875-2 : 2006 (2 Revision) |
Metal cutting band saw blades: Part 2 Characteristics and dimensions (second revision) | 0 | Jan, 2021 | Buy | |
| 62 | IS 12537 : 1989 |
Small tools -- Shank type gear shaper cutter -- Specification | 0 | Nov, 2018 | Download | |
| 63 | IS 13167 : 1991 |
Side and face milling cutters with indexable inserts -- Specification | 0 | Nov, 2018 | Buy | |
| 64 | IS/ISO 7388 : Part 2 : 2007/ISO 7388 : Part 2 : 2007 |
Tool shanks with 7/24 taper for automatic tool changers: Part 2 Dimensions and designation of shanks of forms J, JD and JF | 0 | Jun, 2023 | Buy | |
| 65 | IS 7822 : 2005/ISO 3291 :2005 (2 Revision) |
Twist drills -- Extra-long morse taper shank -- Specification (second revision) | 0 | Jan, 2021 | Buy | |
| 66 | IS 5702 : 1970 |
Specification for flat thread rolling dies | 0 | Nov, 2018 | Download | |
| 67 | IS/ISO 5609 : Part 3 : 2012/ISO 5609-3 : 2012 |
Tool holders for internal turning with cylindrical shank for indexable inserts: Part 3 Style K | 0 | Apr, 2021 | Buy | |
| 68 | IS 15091 : Part 1 : 2002/ISO 9361-1 : 2014 |
Indexable inserts for cutting tools -- Ceramic inserts with rounded corners: Part 1 Dimensions of inserts without fixing hole | 0 | Nov, 2018 | Buy | |
| 69 | IS 11937 : 1987 |
Specification for carbide tipped machine jig reamer with morse taper shank | 1 | Nov, 2018 | Download | |
| 70 | IS 16637 : Part 1 : 2018/ISO 5610-1:2010 |
Tool holders with rectangular shank for indexable inserts: Part 1 General survey, correlation and determination of dimensions | 0 | Jun, 2023 | Buy | |
| 71 | IS 6323 : 1982 (1 Revision) |
Specification for convex milling cutters (first revision) | 0 | Nov, 2018 | Download | |
| 72 | IS 13741 : Part 6 : 1993 |
Carbide tips: Part 6 Carbide tips for single point threading tools -- Specification | 0 | Nov, 2018 | Download | |
| 73 | IS 10514 : 1983 |
Specification for split taper socket for tools with parallel shank and driving tenon | 0 | Nov, 2018 | Download | |
| 74 | IS 8619 : 1977 |
Specification for bearing collars for milling arbors | 1 | Nov, 2018 | Buy | |
| 75 | IS 5919 : 2018/ISO 2238 : 2011 (2 Revision) |
Machine bridge reamers (second revision) | 0 | ---- | Buy | |
| 76 | IS 1983 : 2004/ISO 241 : 1994 (2 Revision) |
Shank for turning and planing tools -- Shapes and dimensions of the section (second revision) | 0 | Jan, 2021 | Buy | |
| 77 | IS 11943 : Part 6 : 1987 |
Specification for hard metal burrs: Part 6 Arch round - (Ball - ) nose burrs (Type F) | 0 | Nov, 2018 | Buy | |
| 78 | IS 16637 : Part 4 : 2018/ISO 5610-4:2010 |
Tool holders with rectangular shank for indexable inserts: Part 4 Style D | 0 | Jun, 2023 | Buy | |
| 79 | IS 6550 : 1992 (1 Revision) |
Thread milling cutter with parallel shank -- Specification (first revision) | 1 | Nov, 2018 | Download | |
| 80 | IS 5106 : 1969 |
Specification for twist drills, taper square shanks for carpenters braces | 1 | Nov, 2018 | Download | |
| 81 | IS 14867 : Part 3 : 2019/ISO 5611-3 : 2015 |
Cartridges, type A, for indexable inserts: Part 3 Style G | 0 | Jun, 2023 | Buy | |
| 82 | IS 13742 : Part 8 : 1993 |
Carbide tipped single point tools -- ISO series: Part 8 boring tool (ISO 8) -- Specification | 1 | Nov, 2018 | Download | |
| 83 | IS 11002 : 1984 |
Specification for machine jig reamers morse taper shank | 2 | Jan, 2021 | Download | |
| 84 | IS 9324 : 1991 (1 Revision) |
Carbide tipped end mlls with morse taper shanks -- Specification (first revision) | 0 | Nov, 2018 | Download | |
| 85 | IS 6175 : Part 3 : 1992 (2 Revision) |
Screwing taps: Part 3 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches and m3 to m100 with fine pitches -- Specification (second revision) | 1 | Nov, 2018 | Buy | |
| 86 | IS 3239 : 1994 (2 Revision) |
Die stock for circular screwing dies -- Specification (second revision) | 0 | Nov, 2018 | Download | |
| 87 | IS 12323 : 1988 |
Specification for circular screwing dies for parallel pipe threads, G series | 0 | Jan, 2021 | Buy | |
| 88 | IS 11172 : Part 1 : 2018/ISO 10889-1 : 2004 (1 Revision) |
Tool holders with cylindrical shank: Part 1 Cylindrical shank, location bore -- Specification (first revision) | 0 | ---- | Buy | |
| 89 | IS 7766 : 1975 |
Specification for twist drills for jig boring machines | 2 | Nov, 2018 | Download | |
| 90 | IS 16060 : 2013 |
Solid carbide parallel shank twist drills stub series -- Specification | 0 | Nov, 2018 | Download | |
| 91 | IS 7778 : Part 5 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 5 Milling cutters (first revision) | 0 | Nov, 2018 | Download | |
| 92 | IS 5446 : 2017 (2 Revision) |
Machine chucking reamers with parallel shanks -- Specification (second revision) | 0 | ---- | Buy | |
| 93 | IS 11522 : Part 5 : 2017/ISO 3002-5 : 1989 |
Basic quantities in cutting and grinding: Part 5 Basic terminology for grinding processes using grinding wheels | 0 | ---- | Buy | |
| 94 | IS 14775 : 2000/ISO 10898 : 1992 |
Spot drills -- Dimensions | 0 | Jan, 2021 | Buy | |
| 95 | IS 11829 : 1986 |
Specification for miniature hand hacksaw blades | 0 | Nov, 2018 | Download | |
| 96 | IS/ISO 5609 : Part 1 : 2012/ISO 5609-1 : 2012 |
Tool holders for internal turning with cylindrical shank for indexable inserts: Part 1 Designation, styles, dimensions and calculation for corrections | 0 | ---- | Buy | |
| 97 | IS 6308 : 1982 (1 Revision) |
Specification for side and face milling cutters (first revision) | 0 | Nov, 2018 | Buy | |
| 98 | IS 5101 : 1991 (1 Revision) |
Twist drills, parallel shank, jobber series -- Specification (first revision) | 0 | Nov, 2018 | Buy | |
| 99 | IS 12689 : 1989 |
Small tools -- Subland twist drills with morse taper shank for clearance holes and counterbores for slotted cheese head screws -- Specification | 1 | Nov, 2018 | Download | |
| 100 | IS 13741 : Part 1 : 1993 |
Carbide tips: Part 1 Carbide tips for single point tools -- Specification | 1 | Nov, 2018 | Buy | |
| 101 | IS 10140 : 1982 |
Specification for bandsaw blades for woodworking | 1 | Nov, 2018 | Buy | |
| 102 | IS 8307 : 1976 |
Specification for carbide tipped, twist drills, parallel shank | 1 | Nov, 2018 | Download | |
| 103 | IS 5710 : 1988 (1 Revision) |
Specification for counterbores with morse taper shanks and detachable pilots (first revision) | 0 | Nov, 2018 | Buy | |
| 104 | IS 15144 : 2002 |
Indexable hardmetal (Carbide) inserts with rounded corners with partly cylindrical fixing hole -- Dimensions of inserts with 7° normal clearance for light alloy and plastic components turning | 0 | Nov, 2018 | Download | |
| 105 | IS 11943 : Part 12 : 1987 |
Specification for hard metal burrs: Part 12 Inverted cone burrs (Type N) | 0 | Nov, 2018 | Buy | |
| 106 | IS 16637 : Part 11 : 2018/ISO 5610-11:2010 |
Tool holders with rectangular shank for indexable inserts: Part 11 Style R | 0 | Jun, 2023 | Buy | |
| 107 | IS 6352 : 2014 (2 Revision) |
Slot drills with parallel shank -- Specification (second revision) | 0 | Dec, 2019 | Buy | |
| 108 | IS 13742 : Part 3 : 1993 |
Carbide tipped single point tools -- ISO series: Part 3 Cranked finishing tool (ISO 3) -- Specification | 0 | Nov, 2018 | Download | |
| 109 | IS 10851 : 1984 |
Specification for taper pin machine reamers with parallel shanks | 1 | Jan, 2021 | Buy | |
| 110 | IS 8732 : 2003/ISO 2490 : 1996 (1 Revision) |
Single -- Start solid (Monobloc) gear nobs with tenon drive or axial keyway, 1 to 40 module -- Nominal dimensions (first revision) | 0 | Nov, 2018 | Buy | |
| 111 | IS 5989 : 1998 (2 Revision) |
Hole mills -- Specification (second revision) | 0 | Nov, 2018 | Download | |
| 112 | IS 2668 : 2004/ISO 3337 : 2000 (1 Revision) |
T-slot cutters with cylindrical shanks and with morse taper shanks having tapped hole (second revision) | 1 | Jan, 2021 | Buy | |
| 113 | IS 11949 : 1987 |
Specification for turret sockets | 0 | Nov, 2018 | Download | |
| 114 | IS 17026 : 2018/ISO 22037 : 2007 |
Solid end mills with corner radii and cylindrical shanks made of hard cutting materials -- Dimensions | 0 | Jun, 2023 | Buy | |
| 115 | IS 6702 : 1991 (1 Revision) |
Morse taper reduction sleeves specification (first revision) | 2 | Nov, 2018 | Buy | |
| 116 | IS 7778 : Part 10 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 10 Carbide tips and indexable inserts (first revision) | 0 | Nov, 2018 | Download | |
| 117 | IS 5364 : 1969 |
Specification for twist drills for taper pin holes with taper 1 : 50 | 0 | Nov, 2018 | Download | |
| 118 | IS 14867 : Part 7 : 2019/ISO 5611-7 : 2015 |
Cartridges, type A, for indexable inserts: Part 7 Style R | 0 | Jun, 2023 | Buy | |
| 119 | IS 13776 : 1993/ISO 1080 : 1975 |
Machine tools morse taper shanks -- Cotter slots taper keys | 0 | Jun, 2023 | Buy | |
| 120 | IS 11441 : 1985 |
Dimensions for ground carbide rounds | 1 | Jan, 2021 | Download | |
| 121 | IS 9775 : 2000 (1 Revision) |
Carbide flats, squares and rounds -- Dimensions (first revision) | 0 | Jan, 2021 | Download | |
| 122 | IS 6175 : Part 7 : 1992 |
Screwing taps: Part 7 Screwing taps for pipe threads parallel rc series -- Specification | 1 | Nov, 2018 | Buy | |
| 123 | IS 5030 : Part 1 : 2017/ISO 4875-1 : 2006 (2 Revision) |
Metal cutting band saw blades: Part 1 Vocabulary (second revision) | 0 | ---- | Buy | |
| 124 | IS 12536 : 1989 |
Small tools -- Disc type gear shaper cutters -- Specification | 0 | Nov, 2018 | Download | |
| 125 | IS 12728 : 1989 |
Carbide tips for dead centres -- Specification | 1 | Nov, 2018 | Download | |
| 126 | IS/ISO 7388 : Part 1 : 2007/ISO 7388-1 : 2007 |
Tool Shanks with 7/24 taper for automatic tool changers: Part 1 Dimensions and designation of shanks of forms A,AD,AF,U,UD and UF | 0 | Jun, 2023 | Buy | |
| 127 | IS 7778 : Part 9 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 9 Single point (HSS And Carbide Tipped) tools (first revision) | 0 | Nov, 2018 | Download | |
| 128 | IS 5698 : 1970 |
Specification for rotary form - relieved gear cutters for spur and helical gears | 3 | Nov, 2018 | Download | |
| 129 | IS/ISO 5609 : Part 2 : 2012/ISO 5609-2 : 2012 |
Tool holders for internal turning with cylindrical shank for indexable inserts: Part 2 Style F | 0 | Apr, 2021 | Buy | |
| 130 | IS 15075 : 2001/ ISO 5468 : 1992 |
Rotary and rotary impact masonry drill bits with hard metal tips -- Dimensions | 0 | Nov, 2018 | Buy | |
| 131 | IS 11936 : 1987 |
Specification for carbide tipped long fluted machine reamer with morse taper shank | 1 | Nov, 2018 | Download | |
| 132 | IS 16637 : Part 5 : 2018/ISO 5610-5:2010 |
Tool holders with rectangular shank for indexable inserts: Part 5 Style F | 0 | Jun, 2023 | Buy | |
| 133 | IS 6322 : 1982 (1 Revision) |
Specification for concave milling cutters (first revision) | 0 | Nov, 2018 | Download | |
| 134 | IS 13741 : Part 5 : 1993 |
Carbide tips: Part 5 Carbide tips for twist drills with point angle 115 degree C -- Specification | 1 | Nov, 2018 | Download | |
| 135 | IS 10465 : 1983 |
Specification for chain wheel rotary tooth form milling cutter | 1 | Nov, 2018 | Download | |
| 136 | IS 8618 : 1977 |
Specification for spacing collars for milling arbors | 1 | Nov, 2018 | Buy | |
| 137 | IS 5918 : 1984 (1 Revision) |
Specification for taper pin, machine reamers with morse taper shanks (first revision) | 2 | Jan, 2021 | Buy | |
| 138 | IS 1850 : 1961 |
Dimensions for shank diameters and driving squares for rotating tools | 1 | Nov, 2018 | Buy | |
| 139 | IS 11943 : Part 5 : 1987 |
Specification for hard metal burrs: Part 5 Oval burrs (Type E) | 0 | Nov, 2018 | Buy | |
| 140 | IS 16992 : Part 1 : 2018/ISO 13399-1 : 2006 |
Cutting tool data representation and exchange: Part 1 Overview, fundamental principles and general information model | 0 | Jun, 2023 | Buy | |
| 141 | IS 6388 : 2017 (2 Revision) |
Slot drills with morse taper shank -- Specification (second revision) | 0 | ---- | Buy | |
| 142 | IS 5105 : 1969 |
Specification for twist drills, taper square shanks for ratchet braces | 1 | Nov, 2018 | Download | |
| 143 | IS 13742 : Part 7 : 1993 |
Carbide tipped single point tools ISO series: Part 7 Parting off tool (ISO 7) -- Specification | 0 | Nov, 2018 | Download | |
| 144 | IS 10952 : 1984/ISO 2306 : 1972 |
Recommendations for drills for use prior to tapping screw threads | 0 | Jan, 2021 | Buy | |
| 145 | IS 9323 : 1991 (1 Revision) |
Carbide tipped end mills with parallel shanks -- specification (first revision) | 1 | Nov, 2018 | Download | |
| 146 | IS 6175 : Part 2 : 1992 (2 Revision) |
Screwing taps: Part 2 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m10 -- Specification (second revision) | 1 | Nov, 2018 | Buy | |
| 147 | IS 3019 : 1973 (1 Revision) |
Specification for high speed steel butt -- Welded single point turning tools (first revision) | 3 | Nov, 2018 | Download | |
| 148 | IS 12322 : 1988 |
Specification for circular screwing dies for taper pipe threads, R - Series | 0 | Nov, 2018 | Buy | |
| 149 | IS/ISO 6462 : 2011/ISO 6462 : 2011 (1 Revision) |
Face milling cutters with indexable inserts -- Dimensions | 0 | Dec, 2019 | Buy | |
| 150 | IS 6776 : 1980 (1 Revision) |
Specification for knurling wheels (first revision) | 1 | Nov, 2018 | Download | |
| 151 | IS 16059 : 2013 |
Solid carbide parallel shank twist drills jobber series -- Specification | 0 | Nov, 2018 | Download | |
| 152 | IS 7778 : Part 4 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 4 Screwing taps, dies and knurling tools (first revision) | 0 | Nov, 2018 | Download | |
| 153 | IS 5445 : 1978 (1 Revision) |
Specification for long fluted machine reamers with morse taper shanks (first revision) | 2 | Nov, 2018 | Buy | |
| 154 | IS 11522 : Part 2 : 2015/ISO 3002-2 : 1982 |
Basic quantities in cutting and grinding: Part 2 Geometry of the active part of cutting tools -- General conversion formulae to relate tool and working angles | 0 | Dec, 2019 | Buy | |
| 155 | IS 14586 : 1998 |
Serration hobs -- Straight sided -- Specification | 0 | Nov, 2018 | Download | |
| 156 | IS 11741 : 1986 |
Specification for circular saws for wood working | 0 | Nov, 2018 | Buy | |
| 157 | IS 14863 : 2018/ISO 5608 : 2012 (1 Revision) |
Turning and copying tool holders and cartridges for indexable inserts -- Designation (first revision) | 0 | ---- | Buy | |
| 158 | IS 6285 : 1971 |
Dimensions for interchangeability of milling cutters and milling arbors with key drive | 1 | Nov, 2018 | Buy | |
| 159 | IS 5100 : 1969 |
Specification for twist drills, parallel shanks, stub series for right hand cutting | 2 | Nov, 2018 | Buy | |
| 160 | IS 12688 : 1989 |
Small tools -- Subland twist drills with parallel morse taper shank for clearance holes and countersinks head screws -- Specification | 1 | Nov, 2018 | Download | |
| 161 | IS 13304 : 1992 |
Countersinks 60°,90° and 120° with parallel shank -- Specification | 0 | Nov, 2018 | Buy | |
| 162 | IS 16136 : 2013 |
Solid carbide end mills with continuous parallel shank -- Specification | 0 | Nov, 2018 | Download | |
| 163 | IS 8306 : 1976 |
Specification for carbide tipped twist drills, morse taper shank | 1 | Nov, 2018 | Download | |
| 164 | IS 5705 : 1988 (1 Revision) |
Specification for detachable pilots for use with counterbores and countersink 90 degree (first revision) | 2 | Nov, 2018 | Download | |
| 165 | IS/ISO 5609 : Part 6 : 2012/ISO 5609-6 : 2012 |
Tool holders for internal turning with cylindrical shank for indexable inserts: Part 6 Style Q | 0 | Apr, 2021 | Buy | |
| 166 | IS 15094 : 2002/ISO 10910 : 1995 |
Classification and designation of approximate chip control zones for indexable inserts with chip breakers | 0 | Jun, 2023 | Buy | |
| 167 | IS 11943 : Part 11 : 1987 |
Specification for hard metal burrs: Part 11 Conical pointed -- Nose burrs (Type M) | 0 | Nov, 2018 | Buy | |
| 168 | IS 16637 : Part 9 : 2018/ISO 5610-9:2010 |
Tool holders with rectangular shank for indexable inserts: Part 9 Style l | 0 | Jun, 2023 | Buy | |
| 169 | IS 6326 : 1996 (1 Revision) |
Equal angle milling cutters -- Specification (first revision) | 0 | Nov, 2018 | Download | |
| 170 | IS 13742 : Part 2 : 1993 |
Carbide tipped single point tools -- ISO series: Part 2 Cranked turning and facing tool (ISO 2) -- Specification | 1 | Dec, 2019 | Download | |
| 171 | IS 10608 : 1998 (1 Revision) |
Spline hobs -- Straight sided specification (first revision) | 0 | Nov, 2018 | Download | |
| 172 | IS 8692 : Part 1 : 2004/ISO 3338-1 : 1996 (1 Revision) |
Cylindrical shanks for milling cutters: Part 1 Dimensional characteristics of plain cylindrical shanks (first revision) | 0 | Jan, 2021 | Buy | |
| 173 | IS 5936 : 1981 (1 Revision) |
Specification for arbors with morse taper shanks for shell tools (first revision) | 0 | Nov, 2018 | Buy | |
| 174 | IS 2594 : 2003 (2 Revision) |
Hacksaw blades -- Specification (second revision) | 0 | Nov, 2018 | Buy | |
| 175 | IS 11943 : Part 9 : 1987 |
Specification for hard metal burrs: Part 9 60 and 90 cone burrs (Type J and K) | 0 | Nov, 2018 | Buy | |
| 176 | IS 17025 : 2018/ISO 15641 : 2001 |
Milling cutters for high speed machining -- Safety requirements | 0 | Jun, 2023 | Buy | |
| 177 | IS 6682 : 1991 (1 Revision) |
Morse taper extension sockets -- Specification (first revision) | 1 | Nov, 2018 | Download | |
| 178 | IS 7778 : Part 1 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 1 Twist drills, countersink and counterbores (first revision) | 0 | Nov, 2018 | Download | |
| 179 | IS 5363 : 2017 (2 Revision) |
Micro-drills -- Specification (second revision) | 0 | ---- | Download | |
| 180 | IS 14867 : Part 6 : 2019/ISO 5611-6 : 2015 |
Cartridges, type A, for indexable inserts: Part 6 Style l | 0 | Jun, 2023 | Buy | |
| 181 | IS 13744 : Part 1 to 8 : 1995 |
Carbide tipped single point planing tools -- specification | 1 | Jan, 2021 | Download | |
| 182 | IS 11351 : 2005 (1 Revision) |
Stub self-holding tapers -- Dimensions (first revision) | 0 | Jan, 2021 | Download | |
| 183 | IS 9771 : 1981 |
Specification for carbide tipped core drills with morse taper shanks | 0 | Nov, 2018 | Download | |
| 184 | IS 6175 : Part 6 : 1992 |
Screwing taps: Part 6 Screwing taps for pipe threads parallel g series -- Specification | 1 | Nov, 2018 | Buy | |
| 185 | IS 4921 : 1968 |
Specification for extension bars | 0 | Nov, 2018 | Download | |
| 186 | IS 12354 : 2002/ISO 6987: 1998 (1 Revision) |
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole -- Dimensions (first revision) | 0 | Nov, 2018 | Buy | |
| 187 | IS 12716 : 2002 (1 Revision) |
End mills with indexable specification (first revision) | 0 | Nov, 2018 | Buy | |
| 188 | IS 8614 : Part 1 : 2013/ISO 839-1 : 2006 (2 Revision) |
Milling machine arbors with 7/24 tapers: Part 1 Dimensions and designation (second revision) | 0 | Jun, 2023 | Buy | |
| 189 | IS 7778 : Part 8 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 8 Saws (first revision) | 0 | Nov, 2018 | Download | |
| 190 | IS 5693 : 1988 (1 Revision) |
Specification for countersinks 90°, with parallel shanks and solid pilots (first revision) | 1 | Nov, 2018 | Buy | |
| 191 | IS 14867 : Part 11 : 2019/ISO 5611-11 : 2015 |
Cartridges, type A, for indexable inserts: Part 11 Style W | 0 | Jun, 2023 | Buy | |
| 192 | IS 15067 : 2001 |
End mills with brazed helical hard metal tips -- Dimensions | 0 | Nov, 2018 | Buy | |
| 193 | IS 11935 : 1987 |
Specification for carbide tipped chucking reamers with morse taper shank with long cutting edge | 1 | Nov, 2018 | Download | |
| 194 | IS 16637 : Part 7 : 2018/ISO 5610-7:2010 |
Tool holders with rectangular shank for indexable inserts: Part 7 Style J | 0 | Jun, 2023 | Buy | |
| 195 | IS 6314 : 1982 (1 Revision) |
Specification for single corner rounding milling cutters (first revision) | 0 | Nov, 2018 | Download | |
| 196 | IS 13741 : Part 4 : 1993 |
Carbide tips: Part 4 Carbide tips for multi point tools -- Specification | 0 | Nov, 2018 | Download | |
| 197 | IS 10412 : 1983 |
System of designation and marking of single point cutting tools with carbide tips | 1 | Nov, 2018 | Buy | |
| 198 | IS 8616 : 1993 (1 Revision) |
Stub milling arbors with self-release 7/24 taper and with key -- Specification (first revision) | 0 | Nov, 2018 | Download | |
| 199 | IS 5907 : 1970 |
Specification for socket reamers with morse taper shanks | 3 | Nov, 2018 | Buy | |
| 200 | IS 1715 : 2002 (3 Revision) |
Self-holding tapers -- Dimensions (third revision) | 0 | Nov, 2018 | Buy | |
| 201 | IS 11943 : Part 4 : 1987 |
Specification for hard metal burrs: Part 4 Spherical burrs (Type D) | 0 | Nov, 2018 | Buy | |
| 202 | IS 16637 : Part 15 : 2018/ISO 5610-15:2010 |
Tool holders with rectangular shank for indexable inserts: Part 15 Style V | 0 | Jun, 2023 | Buy | |
| 203 | IS 6355 : 1982 (1 Revision) |
Specification for keyway milling cutters (first revision) | 1 | Nov, 2018 | Download | |
| 204 | IS 13742 : Part 6 : 1993 |
Carbide tipped single point tool ISO series: Part 6 Cranked turning tool (ISO 6) -- Specification | 0 | Nov, 2018 | Download | |
| 205 | IS 10915 : 1984 |
Terms, definitions and types of twist drills | 1 | Jan, 2021 | Buy | |
| 206 | IS 8919 : 2007/ISO 2905 : 1985 (1 Revision) |
Modular units for machine tool construction -- Spindle noses and adjustable adaptors for multi spindle heads (first revision) | 0 | Sep, 2017 | Buy | |
| 207 | IS 6175 : Part 1 : 1992 (2 Revision) |
Screwing taps: Part 1 Hand and short machine screwing taps for ISO metric screw threads sizes ml to m2.5 -- Specification (second revision) | 1 | Nov, 2018 | Buy | |
| 208 | IS 2671 : 1964 |
Specification for interlocked milling cutters | 0 | Nov, 2018 | Download | |
| 209 | IS 12321 : 1988 |
Specification for circular screwing dies for ISO metric threads | 0 | Nov, 2018 | Download | |
| 210 | IS 16637 : Part 12 : 2018/ISO 5610-12:2010 |
Tool holders with rectangular shank for indexable inserts: Part 12 Style S | 0 | Jun, 2023 | Buy | |
| 211 | IS 6710 : 1977 (1 Revision) |
Specification for centre drills type R (first revision) | 1 | Nov, 2018 | Buy | |
| 212 | IS 5104 : 1969 |
Specification for twist drills, oversize morse taper shank | 4 | Nov, 2018 | Buy | |
| 213 | IS 7778 : Part 3 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 3 Sleeves, sockets and adaptors (first revision) | 0 | Nov, 2018 | Download | |
| 214 | IS 5444 : 1978 (1 Revision) |
Specification for parallel hand reamers with parallel shanks (first revision) | 2 | Nov, 2018 | Buy | |
| 215 | IS 14867 : Part 12 : 2019/ISO 5611-12 : 2015 |
Cartridges, type A, for indexable inserts: Part 12 Style Y | 0 | Jun, 2023 | Buy | |
| 216 | IS 14585 : 1998 |
Spline hobs -- Involute sided -- Specification | 0 | Nov, 2018 | Download | |
| 217 | IS 11677 : 2004/ISO 3364 : 2011 (1 Revision) |
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole -- Dimensions (first revision) | 0 | Jan, 2021 | Buy | |
| 218 | IS 16176 : 2014 |
Ratchet pipe threader for taper pipe threads (R - Series) -- Specification | 1 | Dec, 2019 | Download | |
| 219 | IS 6257 : 1982 (1 Revision) |
Specification for shell end mills (first revision) | 0 | Nov, 2018 | Buy | |
| 220 | IS 5031 : 1992 (2 Revision) |
Saws -- Metal slitting -- Specification (second revision) | 0 | Nov, 2018 | Buy | |
| 221 | IS 12687 : 1989 |
Small tools -- Subland twist drills with morse taper shank for holes prior to tapping screw threads -- Specification | 1 | Jun, 2023 | Buy | |
| 222 | IS 13303 : 1992 |
Countersinks 60-degree, 90-degree and 120-degree with morse taper shank -- Specification | 0 | Nov, 2018 | Buy | |
| 223 | IS 6255 : 2013 (3 Revision) |
Inverse dovetail cutters and dovetail cutters with cylindrical shanks (third revision) | 0 | Nov, 2018 | Buy | |
| 224 | IS 8305 : 1976 |
Specification for twist drills, morse taper shank, long series | 1 | Nov, 2018 | Download | |
| 225 | IS 5704 : 1988 (1 Revision) |
Specification for counterbores with parallel shanks and solid pilots (first revision) | 0 | Nov, 2018 | Buy | |
| 226 | IS/ISO 5609 : Part 5 : 2012/ISO 5609-5 : 2012 |
Tool holders for internal turning with cylindrical shank for indexable inserts: Part 5 Style U | 0 | Apr, 2021 | Buy | |
| 227 | IS 15092 : 2002/ISO 3286 : 2016 |
Single point cutting tools -- Corner radii | 0 | Nov, 2018 | Buy | |
| 228 | IS 11943 : Part 10 : 1987 |
Specification for hard metal burrs: Part 10 Conical round -- (Ball) nose burrs (Type L) | 0 | Nov, 2018 | Buy | |
| 229 | IS 16637 : Part 8 : 2018/ISO 5610-8:2010 |
Tool holders with rectangular shank for indexable inserts: Part 8 Style K | 0 | Jun, 2023 | Buy | |
| 230 | IS 6325 : 1971 |
Specification for double angle milling cutters | 0 | Nov, 2018 | Download | |
| 231 | IS 13742 : Part 1 : 1993 |
Carbide tipped single point tools ISO series: Part 1 Straight turning tool (ISO 1 ) -- Specification | 0 | Nov, 2018 | Buy | |
| 232 | IS 10591 : 1983 |
Specification for segmental saws for cold sawing | 1 | Nov, 2018 | Buy | |
| 233 | IS 8621 : 1977 |
Specification for retaining screw for milling arbors | 1 | Nov, 2018 | Download | |
| 234 | IS 5927 : 1981 (1 Revision) |
Specification for reduction sleeves 7/24 tapers to morse tapers (first revision) | 0 | Nov, 2018 | Buy | |
| 235 | IS 2428 : 2007/ISO 513 : 2004 (2 Revision) |
Classification and application of hard cutting materials for metal removal with defined cutting edges -- Designation of the main groups and groups of application (second revision) | 0 | Sep, 2017 | Buy | |
| 236 | IS 11943 : Part 8 : 1987 |
Specification for hard metal burrs: Part 8 Flame burrs (Type H) | 0 | Nov, 2018 | Buy | |
| 237 | IS 17024 : Part 2 : 2018/ISO 8688-2 : 1989 |
Tool life testing in milling: Part 2 End milling | 0 | Jun, 2023 | Buy | |
| 238 | IS 6681 : 1972 |
Dimensions for self-release 7/24 tapers for spindle noses for milling machines | 2 | Nov, 2018 | Download | |
| 239 | IS 7773 : 1975 |
Holding dimensions for broaching tools | 0 | Nov, 2018 | Download | |
| 240 | IS 5362 : 1969 |
Specification for twist drills, parallel shanks, stub series, left hand cutting tor automatics | 1 | Nov, 2018 | Download | |
| 241 | IS 14867 : Part 5 : 2019/ISO 5611-5 : 2015 |
Cartridges, type A, for indexable inserts: Part 5 Style K | 0 | Jun, 2023 | Buy | |
| 242 | IS 13743 : Part 1 to 10 : 1997 |
Carbide tipped single point tools -- Ind series -- Specification | 0 | Nov, 2018 | Download | |
| 243 | IS 11143 : 1984 |
Specification for ground high speed steel tool bits | 1 | Nov, 2018 | Buy | |
| 244 | IS 9326 : 1996 (1 Revision) |
Carbide tipped slot drills with morse taper and tapped end shanks -- Specification (first revision) | 0 | Nov, 2018 | Download | |
| 245 | IS 6175 : Part 5 : 1991 |
Screwing taps: Part 5 Nut screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches -- Specification | 1 | Nov, 2018 | Buy | |
| 246 | IS 4914 : 1983 (1 Revision) |
Specification for tap wrenches adjustable (first revision) | 4 | Nov, 2018 | Download | |
| 247 | IS 12325 : 1988 |
Specification for circular screwing dies for ISO metric conduit pipe threads | 1 | Nov, 2018 | Download | |
| 248 | IS 12692 : 1989 |
Small tools -- Subland twist drills with parallel shanks for clearance holes and countersinks for countersunk head screws -- Specification | 1 | Nov, 2018 | Download | |
| 249 | IS 8692 Part 2 : 2013/ISO3338-2 : 2007 (2 Revision) |
Cylindrical shanks for milling cutters: Part 2 Dimensional characteristics of flatted cylindrical shanks(first revision) | 0 | Nov, 2018 | Buy | |
| 250 | IS 7778 : Part 7 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 7 Gear cutting tools and broaches (first revision) | 0 | Nov, 2018 | Download | |
| 251 | IS 5568 : 1978 (1 Revision) |
Dimensions for tenons and cross -- Slots with taper bore 1 : 30 (first revision) | 1 | Jun, 2023 | Buy | |
| 252 | IS 17047 : Part 1 : 2018/ISO 8688-1 : 1989 |
Tool life testing in milling: Part 1 Face milling | 0 | Jun, 2023 | Buy | |
| 253 | IS 14867 : 2000/ISO 5611 : 1995 |
Cartridges, type A, for indexable inserts -- Dimensions | 0 | Jan, 2021 | Buy | |
| 254 | IS 11934 : 1987 |
Specification for carbide tipped shell reamers | 0 | Nov, 2018 | Download | |
| 255 | IS 16637 : Part 6 : 2018/ISO 5610-6:2010 |
Tool holders with rectangular shank for indexable inserts: Part 6 Style G | 0 | Jun, 2023 | Buy | |
| 256 | IS 6310 : 1971 |
Dimensions for interchangeability of milling cutters and milling arbors with tenon drive | 1 | Nov, 2018 | Buy | |
| 257 | IS 5103 : 1969 |
Specification for twist drills, morse taper shanks | 3 | Nov, 2018 | Buy | |
| 258 | IS 13741 : Part 3 : 1993 |
Carbide tips: Part 3 Carbide tips for single point tool blanks for sliding head type automats -- Specification | 0 | Nov, 2018 | Download | |
| 259 | IS 10293 : 1982 |
Dimensions for optional recess on morse taper shanks for tools | 0 | Nov, 2018 | Download | |
| 260 | IS 8615 : 1993 (1 Revision) |
Stub milling arbors with self-release 7/24 taper -- Specification (first revision) | 1 | Nov, 2018 | Download | |
| 261 | IS 5882 : 1970 |
Specification for socket reamers with parallel shanks | 2 | Nov, 2018 | Buy | |
| 262 | IS 15777 : 2008 |
Selection of hacksaw tooth for metal cutting -- Recommendations | 0 | Nov, 2018 | Download | |
| 263 | IS 11943 : Part 3 : 1987 |
Specification for hard metal burrs: Part 3 Cylindrical round -- (Ball - ) nose burrs (Type C) | 0 | Nov, 2018 | Buy | |
| 264 | IS 16637 : Part 14 : 2018/ISO 5610-14:2010 |
Tool holders with rectangular shank for indexable inserts: Part 14 Style H | 0 | Jun, 2023 | Buy | |
| 265 | IS 6354 : 2017 (2 Revision) |
End mills with morse taper shank -- Specification (second revision) | 0 | ---- | Buy | |
| 266 | IS 13742 : Part 5 : 1993 |
Carbide tips: Part 5 Carbide tips twist drills with point angle 115 degree -- Specification | 0 | Nov, 2018 | Download | |
| 267 | IS 10885 : 1984 |
Specification for carbide tipped chucking reamers with morse taper shanks with short cutting edge | 2 | Jan, 2021 | Download | |
| 268 | IS 8918 : 1978 |
Dimensions for spindle noses for adjustable adaptors | 0 | Nov, 2018 | Download | |
| 269 | IS 6173 : Part 2 : 1992 (1 Revision) |
Screwing taps -- Dimensions and tolerances of threaded portion: Part 2 For pipe screw threads G, Rp and Rc series | 1 | Nov, 2018 | Buy | |
| 270 | IS 2670 : 1991 |
Thread milling cutter shell type specification (first revision) | 0 | Nov, 2018 | Download | |
| 271 | IS 12319 : 1988 |
Circular screwing dies -- General table of dimensions | 0 | Nov, 2018 | Download | |
| 272 | IS 17028 : 2018/ISO 15917 : 2012 |
Solid ball -- Nosed end mills with cylindrical shanks, made of carbide and ceramic materials | 0 | Jun, 2023 | Buy | |
| 273 | IS 6709 : 1977 (1 Revision) |
Specification for center drills type B (first revision) | 0 | Nov, 2018 | Buy | |
| 274 | IS 7778 : Part 2 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 2 Reamers (first revision) | 0 | Nov, 2018 | Download | |
| 275 | IS 5366 : 1978 (1 Revision) |
Specification for core drills, morse taper shanks (first revision) | 2 | Nov, 2018 | Buy | |
| 276 | IS 14867 : Part 10 : 2019/ISO 5611-10 : 2015 |
Cartridges, type A, for indexable inserts: Part 10 Style U | 0 | Jun, 2023 | Buy | |
| 277 | IS 14532 : 1998/ISO 3936 : 1993 |
Reduction sleeves with tenon drive with external and internal 7/24 taper -- Dimensions | 0 | Jun, 2023 | Buy | |
| 278 | IS 11523 : 1998/ISO 3365 : 1985 (1 Revision) |
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole -- Dimensions (first revision) | 0 | Nov, 2018 | Buy | |
| 279 | IS 8692 : Part 3 : 2007/ISO 3338-3 : 1996 |
Cylindrical shanks for milling cutters: Part 3 Dimensional characteristics of threaded shanks | 0 | Jun, 2023 | Buy | |
| 280 | IS 6256 : 1995 (1 Revision) |
Shell end single angle milling cutters -- Specification (first revision) | 0 | Jan, 2021 | Download | |
| 281 | IS 5030 : Part 3 : 2005 (1 Revision) |
Metal cutting bandsaw blade -- Specification: Part 3 Dimensions and other requirements (second revision) | 1 | Jan, 2021 | Download | |
| 282 | IS 12538 : 1989 |
Small tools -- Shank type gear shaper cutter -- Specification | 0 | Nov, 2018 | Download |