Low nickel austenitic stainless steel plate, sheet, and strip for utensils and kitchen appliances - Specification Amendment - 3
15-02-2025
3.
MTD 7(27176)
Specification for wrought aluminium and aluminium alloy plate for general engineering purposes (Third Revision) Amendment - 2
31-01-2025
4.
MTD 19(27092)
Cold formed welded carbon steel square and rectangular hollow sections for mechanical, general engineering and decorative purposes - Specification Amendment - 1
01-03-2025
5.
MTD 4(27091)
Hot-Rolled and Cold-Rolled Steel Strips Intended for Processing of Fully Processed Grain Oriented Electrical Steel — Specification
20-02-2025
ICS 77.140.50
6.
MTD 19(27052)
Carbon Steel Seamless Pipe for High Temperature Services - Specification
N/A
77.140.75
7.
MTD 11(26987)
Flux cored (Tubular) electrodes for gas shielded and self-shielded metal arc welding of carbon or carbon-manganese steel Amendment - 2
02-01-2025
8.
MTD 4(26897)
Specification for structural weather resistant steels
06-03-2025
77.140.20
9.
MTD 11(26891)
Resistance spot welding: Part 7 Electrode taper fits for spot welding equipment — Dimensions ( Second Revision )
06-01-2025
25.160.30
10.
MTD 11(26678)
Quality requirements for fusion welding of metallic materials: Part 5 Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2 ISO 3834-3 or ISO 3834-4 ( Second Revision )
27-12-2024
25.160.01
11.
MTD 19(26677)
Stainless Steel Welded Tubes for Decorative Purposes - Specification
N/A
77.140.75
12.
MTD 19(26664)
Stainless Steel Welded Tubes for conveyance of aqueous liquids - Specification
N/A
77.140.75
13.
MTD 4(26626)
Hot Rolled and Cold Rolled Steel Strips Intended For Processing Of Semi/fully Processed Non-Grain Oriented Electrical Steel Or Fully Processed Grain Oriented Electrical Steel Specification Amendment - 1
20-02-2025
14.
MTD 4(26438)
Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision) Amendment -2
11-10-2024
15.
MTD 4(26436)
Cold rolled non-oriented electrical steel sheet and strip - Fully processed type - Specification Sixth Revision Amendment - 1
29-09-2024
16.
MTD 16(26393)
Stainless Steel Plate, Sheet and Strip for Utensils, Kitchen ware and portable stainless-steel flasks/bottles — Specification (Third Revision) Amendment - 3
15-02-2025
17.
MTD 24(26292)
Resistance to inter - Granular corrosion of austenitic stainless steels - Method for determination - Part 1 : corrosion test in nitric acid medium by measurement of loss in mass Huey Test
20-11-2024
77.060
18.
MTD 4(26252)
Steel Ingots Billets Blooms Slabs and Bars For Forging — Specification (Sixth Revision)
26-01-2025
77.140.85
19.
MTD 4(26191)
Structural Steel — Part 1 — Hot rolled medium and high tensile non-alloy steel
N/A
77.140.01
20.
MTD 10(26140)
Gold and gold alloys, jewellery/ artefacts - Fineness and marking - Specification (Fourth Revision) Amendment - 2
25-01-2025
21.
MTD 7(26124)
Wrought Aluminium and Aluminium Alloys for Manufacture of Utensils ― Specification (Fifth Revision)
01-01-2025
77.120.10
22.
MTD 26(25871)
Design, Manufacture and Testing of Metallic Recuperator - Code of Practice (First Revision)
01-09-2024
25.180.01
23.
MTD 3(25832)
Metallic materials Knoop hardness test Part 1: Test method
26-07-2024
77.040.10
24.
MTD 3(25831)
Metallic materials Uniaxial creep testing in tension Method of test
07-08-2024
77.040.10
25.
MTD 3(25830)
Metallic materials Ductility testing High speed compression test for porous and cellular metals
26-07-2024
77.040.10
26.
MTD 3(25819)
Metallic materials Vickers hardness test Part 1: Test method
12-07-2024
77.040.10
27.
MTD 3(25818)
Metallic materials Rockwell hardness testPart 3: Calibration of reference blocks
11-07-2024
77.040.10
28.
MTD 3(25817)
Metallic materials Rockwell hardness testPart 2: Verification and calibration of testing machines and indenters
10-07-2024
77.040.10
29.
MTD 3(25816)
Metallic materials Rockwell hardness testPart 1: Test method
12-07-2024
77.040.10
30.
MTD 24(25798)
Code of Practice for Process Design Testing and Application of Hot Dip Galvanizing of Iron and Steel - Part 1 : Batch Process
21-11-2024
25.220.40
31.
MTD 24(25073)
Chromate conversion coating on zinc and cadmium coated articles and zinc base alloys - Specification (First Revision)
20-02-2025
25.220.20
32.
MTD 33(24994)
Microbeam analysis Scanning electron microscopy Guidelines for calibrating image magnification
N/A
37.020
33.
MTD 25(24978)
HARDMETALS- VICKERS HARDNESS TEST ( First Revision )
05-04-2024
77.160
34.
MTD 25(24973)
DETERMINATION OF COBALT IN HARDMETALS BY POTENTIOMETRIC — METHOD ( First Revision )
N/A
77.160
35.
MTD 25(24972)
DETERMINATION OF TITANIUM IN HARDMETALS BY SPECTROPHOTOMETRIC - METHOD ( First Revision )
N/A
77.160
36.
MTD 8(24431)
Copper plate sheet strip and foil for electrical purposes - Specification (Fourth Revision)
13-10-2024
77.120.30
37.
MTD 14(24404)
ONE-PERCENT CHROMIUM STEEL CASTINGS FOR RESISTANCE TO ABRASION SPECIFICATION Third Revision of IS 4896
N/A
77.140.80
38.
MTD 14(24402)
PITCH POWDER FOR USE IN CAST IRON FOUNDRY - SPECIFICATION
N/A
77.140.80
39.
MTD 14(24307)
CODE OF PRACTICE FOR USE OF OXYGEN IN IRON STEEL AND NON-FERROUS METAL FOUNDRIES First Revision of IS 8939
N/A
77.180
40.
MTD 4(24300)
Mild steel wire for general engineering purposes (Fourth Revision) Amendment - 2
03-01-2024
41.
MTD 19(24294)
Specification for spiral welded pipes (Second Revision)
09-04-2024
77.140.75
42.
MTD 34(24039)
METHODS OF CHEMICAL ANALYSIS OF ZINC AND ZINC BASE ALLOYS FOR DIE CASTINGS PART 6 DETERMINATION OF MAGNESIUM BY ATOMIC ABSORPTION SPECTROMETRIC METHOD
N/A
77.120.60
43.
MTD 34(24038)
METHODS OF CHEMICAL ANALYSIS OF ZINC AND ZINC BASE ALLOYS FOR DIE CASTINGS PART 5ANALYSIS BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY
N/A
77.120.60
44.
MTD 14(23726)
HIGH CHROME GRINDING MEDIA BALL FOR CEMENT MILLS - SPECIFICATION
N/A
77.140.80
45.
MTD 8(23710)
Copper and brass strips foils for radiator cores - Specification (Third Revision)
10-11-2023
77.150.01
46.
MTD 13(23693)
SAMPLING OF DOLOMITE LIMESTONE AND OTHER ALLIED MATERIALS INCLUDING PYROXINITE AND OLIFLUX - METHODS Second Revision
17-11-2023
77.100
47.
MTD 13(23674)
DETERMINATION OF COMPRESSION STRENGTH OF IRON ORE PELLETS AFTER REDUCTION - METHOD First Revision
04-11-2023
77.100
48.
MTD 13(23648)
LABORATORY POT-GRATE SINTERING TESTS FOR IRON ORE FINES - GUIDELINES
28-10-2023
77.100
49.
MTD 14(22884)
STANDARD SILICA SAND FOR RAW MATERIAL TESTING IN FOUNDARY - SPECIFICATION
24-09-2023
77.140.80
50.
MTD 4(22826)
PRE-PAINTED ALUMINIUM ZINC ALLOY METALLIC COATED STEEL STRIP AND SHEET -Specification first revision
26-08-2023
ICS 77.140.50
51.
MTD 4(22804)
HOT DIP ALUMINIUM-ZINC ALLOY METALLIC COATED STEEL STRIP AND SHEET - SPECIFICATION(first revision)
18-08-2023
ICS 77.140.50
52.
MTD 13(22542)
MELTING CHARACTERISTICS OF SPONGE IRONDIRECT REDUCED IRON DRI First Revision
N/A
77.100
53.
MTD 8(22251)
Grading testing and acceptance of copper and copper alloy scrap guidelines
03-06-2023
77.120.30
54.
MTD 16(22240)
GENERAL REQUIREMENTS FOR STEEL DROP UPSET AND PRESS FORGINGS FIRST REVISION
26-07-2023
77.140.85
55.
MTD 16(22234)
Specification for Machining allowances and tolerances for open die steel forgings: Part 2 high alloy steel forgings
N/A
77.140.85; 77.140.20
56.
MTD 16(22233)
Specification for machining allowances and tolerances for open die steel forgings: Part 1 carbon and low alloy steel forgings: Part 1 carbon and low alloy steel forgings
03-05-2023
77.140.85 , 77.140.45
57.
MTD 10(22136)
DETERMINATION OF GOLD CONTENT IN GOLD BULLION GOLD ALLOYS AND GOLD JEWELLERYARTEFACTS BY CUPELLATION FIRE ASSAY METHOD
22-04-2023
39.060
58.
MTD 22(21991)
Code of practice for preparation of metallographic specimens: Part 1 general features (first revision)
06-09-2023
77.080.20
59.
MTD 22(21986)
Heat treatment of maraging steel - Code of practice(first revision)
17-04-2023
77.080.20
60.
MTD 22(21980)
Code of practice for heat treatment of aluminium alloys (first revision)
06-08-2023
77.080.20
61.
MTD 24(21013)
Recommended practice silver plating for for general engineering purposes First Revision
22-01-2023
77.020
62.
MTD 24(21005)
Specification for anodized aluminium for automobile use (First Revision)
19-01-2023
77.020
63.
MTD 14(20992)
Specification for natural moulding sand for use in foundries
22-03-2023
77.180
64.
MTD 3(20807)
Method for upsetting test on metallic materials
07-01-2024
77.040.10
65.
MTD 14(20778)
SPECIFICATION FOR CHAMOTTE First Revision
18-03-2023
77.180
66.
MTD 7(20323)
Aluminium and aluminium alloys scrap ― Requirements and conditions of delivery