| S. No. |
Doc. NO. | Document Title | Stage |
|---|---|---|---|
| 1 | PCD/01/17545 | PETROLEUM AND ITS PRODUCT METHODS OF TEST DETERMINATION OF HYDROCARBONS AND NON-HYDROCARBON GASES IN REFINERY GAS STREAMS BY GAS CHROMATOGRAPHY | F-Draft |
| 2 | PCD/01/18454 | Methods of test for petroleum and its products Part Determination of the leakage tendencies of automotive wheel bearing greases | WC-Draft |
| 3 | PCD/01/20185 | PETROLEUM AND ITS PRODUCTS - METHODS OF TEST PARTS 55 / SEC 1 DETERMINATION OF SAPONIFICATION VALUE OF PETROLEUM PRODUCTS (Second Revision) | F-Draft |
| 4 | PCD/01/20191 | Methods of test for petroleum and its products Part Determination of mercaptan sulphur | Finalization |
| 5 | PCD/01/21247 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS PART DETERMINATION OF OXYGENATES SUCH AS ETHERS TERTIARY AMYL ALCOHOL AND C1 TO C4 ALCOHOLS IN MOTOR GASOLINE BY GAS CHROMATOGRAPHY METHOD | WC-Draft |
| 6 | PCD/01/21661 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS P: 111 ANALYSIS OF LIQUEFIED PETROLEUM GASES LPG AND PROPYLENE CONCENTRATES BY GAS CHROMATOGRAPHY | WC-Draft |
| 7 | PCD/01/21671 | Quantitative determination of Dimethyl ether DME content in DME blended Liquefied petroleum gas (LPG) fuel by Gas Chromatography | WC-Draft |
| 8 | PCD/01/21678 | DETERMINATION OF NON-CONDENSABLE GASES IN C2 AND LIGHTER HYDROCARBON PRODUCTS BY GAS CHROMATOGRAPHY First Revision | P-Draft |
| 9 | PCD/01/22005 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS P:5 DETERMINATION OF KEROSENE BURNING CHARACTERISTICS- 24 HOUR METHOD | WC-Draft |
| 10 | PCD/01/22023 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS PART 79 DETERMINATION OF VANADIUM AND NICKEL IN FURNACE OIL CRUDE OIL AND THEIR RESIDUES SPECTROPHOTOMETRIC METHOD | WC-Draft |
| 11 | PCD/01/22406 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS PART 34 DETERMINATION OF SULPHUR IN PETROLEUM PRODUCTS LAMP METHOD | WC-Draft |
| 12 | PCD/01/22415 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS Part - DETERMINATION OF FATTY ACID METHYL ESTERS IN BIODIESEL BLENDED AUTOMOTIVE DIESELPARAFFINIC DIESEL FUELS BY HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY - REFRACTIVE INDEX DETECTION | P-Draft |
| 13 | PCD/01/23296 | NATURAL GAS DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION | Finalization |
| 14 | PCD/01/23320 | NATURAL GAS GUIDELINES TO TRACEABILITY IN ANALYSIS | Finalization |
| 15 | PCD/01/23354 | NATURAL GAS - DETERMINATION OF COMPOSITION AND DEFINED UNCERTAINTY BY GAS CHROMATOGRAPHY PART 4: DETERMINATION OF NITROGEN CARBON DIOXIDE AND C1 TO C5 AND C6 HYDOCARBONS FOR A LABORATORY AND ON-LINE MEASURING SYSTEM USING TWO COLUMNS | Finalization |
| 16 | PCD/01/23724 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS DETERMINATION OF HYDROCARBON TYPES AND OXYGENATES IN AUTOMOTIVE-MOTOR GASOLINE AND IN ETHANOL E85 AUTOMOTIVE FUEL MULTIDIMENSIONAL GAS CHROMATOGRAPHY METHOD | WC-Draft |
| 17 | PCD/01/23725 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS DETERMINATION OF SULFUR CONTENT ENERGY - DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY | WC-Draft |
| 18 | PCD/01/23728 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS DETERMINATION OF TOTAL VOLATILE SULPHUR IN GASEOUS HYDROCARBONS AND LIQUEFIED PETROLEUM GASES THROUGH ULTRAVIOLET FLUORESCENCE DETECTION | P-Draft |
| 19 | PCD/01/24187 | Methods of Test for Petroleum and its Products P : 20 Determination of Flash Point Abel Closed-Cup Method Fourth Revision | WC-Draft |
| 20 | PCD/01/24191 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS GLASS CAPILLARY KINEMATIC VISCOMETERS SPECIFICATIONS AND OPERATING INSTRUCTIONS | WC-Draft |
| 21 | PCD/01/24193 | Methods of Test for Petroleum and its Products P : 25 Transparent And Opaque Liquids Section 1 Determination of Kinematic Viscosity and Calculation of Dynamic Viscosity Second Revision | WC-Draft |
| 22 | PCD/01/24451 | Methods of test for petroleum and its products [p : 154] determination of the oxidation stability of middle - Distillate fuels Amendment - 1 | WC-Draft |
| 23 | PCD/01/24453 | Methods of Test for Petroleum and its Products: Part 1 Sec 2 :Determination of Base Number of Petroleum Products by Potentiometric Titration | Project-Approval |
| 24 | PCD/01/24591 | Natural gas - Sampling guidelines | Finalization |
| 25 | PCD/01/24606 | Natural Gas - Calculation of Compression Factor- Part 3 Calculation Using Physical Properties | Finalization |
| 26 | PCD/01/25411 | PETROLEUM PRODUCTS DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR AND AVIATION FUELS MOTOR METHOD Third Revision | WC-Draft |
| 27 | PCD/01/25415 | PETROLEUM PRODUCTS DETERMINATION OF KNOCK CHARACTERISTICS OF MOTOR FUELS RESEARCH METHOD Third Revision | WC-Draft |
| 28 | PCD/01/25456 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS PART 101 COLORIMETRIC DETERMINATION OF PHOSPHORUS IN LUBRICATING OILS | WC-Draft |
| 29 | PCD/01/25637 | DETERMINATION OF WEAR PREVENTIVE CHARACTERISTICS OF LUBRICANTS FOUR-BALL METHOD | P-Draft |
| 30 | PCD/03/17838 | Automotive fuels Paraffinic diesel fuel from synthesis or hydrotreatment Specification | P-Draft |
| 31 | PCD/03/19658 | Automotive Diesel Fuel - Specification seventh revision | Under Published |
| 32 | PCD/03/19709 | Toluene - Specification third revision | Under Published |
| 33 | PCD/03/22730 | FUEL OILS - SPECIFICATION | WC-Draft |
| 34 | PCD/03/22875 | E 20 fuel - Admixture of anhydrous ethanol and gasoline - As fuel for spark ignited engine powered vehicles - Specification Amendment - 2 | WC-Draft |
| 35 | PCD/03/23073 | 20 PERCENT DIMETHYL ETHER DME BLENDED LIQUEFIED PETROLEUM GAS LPG SPECIFICATION | Under Published |
| 36 | PCD/03/23286 | Motor gasoline - Specification (Sixth Revision) Amendment - 5 | WC-Draft |
| 37 | PCD/03/23723 | KEROSENE SPECIFICATION | WC-Draft |
| 38 | PCD/03/24139 | HEAVY PETROLEUM STOCK HPS SPECIFICATION | WC-Draft |
| 39 | PCD/03/24410 | BENZENE - SPECIFICATION | WC-Draft |
| 40 | PCD/03/24729 | HEXANE INDUSTRIAL SOLVENT GRADE SPECIFICATION | P-Draft |
| 41 | PCD/03/24988 | HIGH FLASH HIGH SPEED DIESEL SPECIFICATION | WC-Draft |
| 42 | PCD/03/25678 | Biogas Biomethane Specification | WC-Draft |
| 43 | PCD/06/14176 | TRACKLESS EMULSION SPECIFICATION | WC-Draft |
| 44 | PCD/06/20211 | METHODS FOR TESTING BITUMINOUS MATERIALS: DETERMINATION OF FRAASS BREAKING POINT OF BITUMEN (First Revision) | Under Published |
| 45 | PCD/06/20271 | METHOD FOR DETERMINATION OF ASPHALTENES IN BITUMEN BY PRECIPITATION WITH NORMAL HEPTANE (First Revision) | Under Published |
| 46 | PCD/06/20497 | METHOD FOR TESTING TAR AND BITUMINOUS MATERIALS: DETERMINATION OF SATURATES NAPHTHENE AROMATICS POLAR AROMATICS AND ASPHALTENES | Under Published |
| 47 | PCD/06/20743 | METHODS FOR TESTING TAR AND BITUMINOUS MATERIALS: DETERMINATION OF MINERAL MATTER ASH | Under Published |
| 48 | PCD/06/21327 | Tar and Bituminous Materials -Methods for Test -Determination of Phenols (Second Revision) | Under Published |
| 49 | PCD/06/22040 | HIGH RESILIENT MODULUS BITUMEN HMB SPECIFICATION | P-Draft |
| 50 | PCD/06/22140 | Tar and Bituminous Materials -Methods for Test Determination of Naphthalene (Second Revision) | Under Published |
| 51 | PCD/06/22148 | Tar and Bituminous Materials - Methods for Test -Determination of Volatile Matter Content (Second Revision) | Under Published |
| 52 | PCD/06/23418 | METHOD OF TEST FOR DETERMINATION OF SPECIFIC GRAVITY OF BITUMINOUS MIXTURES | WC-Draft |
| 53 | PCD/06/25036 | Method for determination of wax content in bitumen - Specification (First Revision) Amendment - 1 | WC-Draft |
| 54 | PCD/06/25037 | Rubber modified bitumen (Rmb) - specification Amendment - 1 | WC-Draft |
| 55 | PCD/07/19505 | Solid Biofuels — Vocabulary | Under Published |
| 56 | PCD/07/19732 | METHODS FOR SAMPLING OF COAL AND COKE: PART 1 SAMPLING OF COAL SECTION 1 MANUAL SAMPLING (Second Revision) | Under Published |
| 57 | PCD/07/20027 | SOLID BIOFUELS - FUEL SPECIFICATIONS AND CLASSES - PELLETS FROM AGRO AND HERBACEOUS RESIDUES | Under Published |
| 58 | PCD/07/20028 | SOLID BIOFUELS - FUEL SPECIFICATION AND CLASSES - BRIQUETTES FROM AGRO AND HERBACEOUS RESIDUES | Under Published |
| 59 | PCD/07/20276 | Solid Biofuels - Sample Preparation | Under Published |
| 60 | PCD/07/24223 | Methods of Test for Coal and Coke Part 1 Proximate Analysis Third Revision | WC-Draft |
| 61 | PCD/07/24232 | Coal for Cement Manufacture Specification First Revision | WC-Draft |
| 62 | PCD/07/25093 | Method of test for Brown Coals and Lignites: Part 4 Determination of Yield of Benzene - Soluble Extract Semi - Automatic Method Third Revision | WC-Draft |
| 63 | PCD/07/25094 | Methods of Test for Brown Coals and Lignites Part 6 Determination of True Relative Density and Apparent Relative Density First Revision | WC-Draft |
| 64 | PCD/07/25095 | Solid Biofuels Determination of Ash Content First Revision | WC-Draft |
| 65 | PCD/07/25096 | Solid Biofuels Determination of Moisture Content Part 3 Moisture in General Analysis Sample First Revision | WC-Draft |
| 66 | PCD/07/25097 | Solid Biofuels Determination of Volatile Matter First Revision | WC-Draft |
| 67 | PCD/07/25098 | Solid Biofuels Determination of Moisture Content Part 1 Reference Method First Revision | WC-Draft |
| 68 | PCD/07/25211 | SOLID BIOFUELS - DETERMINATION OF MAJOR ELEMENTS - Al Ca Fe Mg P K Si Na AND Ti | WC-Draft |
| 69 | PCD/07/25212 | SOLID BIOFUELS DETERMINATION OF MINOR ELEMENTS | WC-Draft |
| 70 | PCD/07/25218 | Methods of test for Abrasive Properties of Coal and Associated Minerals Second Revision | WC-Draft |
| 71 | PCD/07/25223 | SOLID BIOFUELS SAMPLING | WC-Draft |
| 72 | PCD/07/25597 | Coal and Coke Methods of Test Part 4 Ultimate Analysis Section 2 Determination of Nitrogen Second Revision | WC-Draft |
| 73 | PCD/07/25615 | Coal and Coke - Methods for determination of the chemical composition of ash Second Revision | WC-Draft |
| 74 | PCD/09/21730 | ALCOHOL DENATURANTS - SPECIFICATION Third Revision | Under Published |
| 75 | PCD/09/21797 | Normal Butyl Acetate Specification Third Revision | WC-Draft |
| 76 | PCD/09/22256 | Pyridine - Specification (First Revision) Amendment - 1 | Under Published |
| 77 | PCD/09/22257 | Acetone - Specification ( Fifth Revision ) Amendment - 3 | Under Published |
| 78 | PCD/09/23390 | Specification for Maleic Anhydride, Technical ( Second Revision ) Amendment - 5 | Under Published |
| 79 | PCD/09/23391 | Acetic Acid - Specification ( Fourth Revision ) Amendment - 3 | Under Published |
| 80 | PCD/09/23392 | Specification For Methylene Chloride ( Dichloromethane ), Technical ( Second Revision) Amendment - 2 | Under Published |
| 81 | PCD/09/23411 | Iso Propyl Alcohol - Specification ( Second Revision ) Amendment - 2 | Under Published |
| 82 | PCD/09/23412 | Terephthalic Acid - Specification (First revision) Amendment - 1 | Under Published |
| 83 | PCD/09/23413 | Urea , Technical - Specification (Second Revision) Amendment - 1 | Under Published |
| 84 | PCD/09/23563 | Carbon Disulphide Technical Specification Third Revision | WC-Draft |
| 85 | PCD/09/23939 | Acetaldehyde Specification First Revision | WC-Draft |
| 86 | PCD/09/24367 | n-Butyl Acrylate Specification First Revision | WC-Draft |
| 87 | PCD/09/24405 | Specification for Methanol ( Methyl Alcohol ) ( Third Revision ) Amendment - 2 | Under Published |
| 88 | PCD/09/24417 | Acetone - Specification ( Fifth Revision ) Amendment - 4 | WC-Draft |
| 89 | PCD/09/24540 | Ethyl Acrylate Specification First Revision | WC-Draft |
| 90 | PCD/09/24588 | Trimethylamine Technical Specification First Revision | WC-Draft |
| 91 | PCD/09/24589 | Monomethylamine Technical Specification First Revision | WC-Draft |
| 92 | PCD/09/24772 | Dimethylamine Technical Specification First Revision | WC-Draft |
| 93 | PCD/09/24831 | Phthalic Anhydride Technical Specification Third Revision | WC-Draft |
| 94 | PCD/09/25183 | Tables for Alcoholometry by Hydrometer Method (First Revision) Amendment - 2 | WC-Draft |
| 95 | PCD/12/19386 | POLYALKYLENE TEREPHTHALATE PET AND PBT THEIR COPOLYMERS AND LIST OF CONSTITUENTS IN RAW MATERIALS AND END PRODUCTS FOR THEIR SAFE USE IN CONTACT WITH FOODSTUFFS AND PHARMACEUTICALS | WC-Draft |
| 96 | PCD/12/20688 | DEXTRIN FOR ADHESIVE INDUSTRY SPECIFICATION | WC-Draft |
| 97 | PCD/12/20689 | GUM GHATTI SPECIFICATION | WC-Draft |
| 98 | PCD/12/20690 | CODE OF PRACTICE FOR THE APPLICATION OF ADHESIVES IN FOOTWEAR INDUSTRY | WC-Draft |
| 99 | PCD/12/22324 | Testing and characterization of mechanically recycled polypropylene PP and polyethylene PE for intended use in different plastics processing techniques | Under Published |
| 100 | PCD/12/22646 | PLASTIC BUTTONS THERMOSETTING SPECIFICATION (Third Revision) | Under Published |
| 101 | PCD/12/22647 | POLYETHYLENE FILMS AND SHEETS SPECIFICATION (Fourth Revision) | Under Published |
| 102 | PCD/12/22672 | STRETCH CLING FILMS SPECIFICATION (First Revision) | Under Published |
| 103 | PCD/12/22673 | MULTILAYERED CROSS LAMINATED SHEETS TARPAULINS COVERSAGRICULTURAL FILMS SPECIFICATION (Second Revision) | Under Published |
| 104 | PCD/12/22834 | NYLON-6 POLYMER FOR ITS SAFE USE IN CONTACT WITH FOODSTUFFS PHARMACEUTICALS AND DRINKING WATER SPECIFICATION (First Revision) | Under Published |
| 105 | PCD/12/22835 | ALUMINIUM FOIL TAPES APPLICATION IN HVAC INDUSTRY AND WHITE GOODS SPECIFICATION | WC-Draft |
| 106 | PCD/12/23279 | SOLVENT CEMENTS FOR CHLORINATED POLY VINYL CHLORIDE CPVC PLASTIC PIPE AND FITTINGS | F-Draft |
| 107 | PCD/12/23782 | PLASTIC RECYCLATES FROM POST - CONSUMER BOTTLES AND OTHER FORMS OF POLY(ETHYLENE TEREPHTHALATE) (PET) PART 1 DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS | F-Draft |
| 108 | PCD/12/23783 | PLASTICS RECYCLATES FROM POST-CONSUMER BOTTLES AND OTHER FORMS OF POLY(ETHYLENE TEREPHTHALATE) (PET) PART 2 PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES | F-Draft |
| 109 | PCD/12/24832 | PRESSURE SENSITIVE ADHESIVE PSA BASED PAPER TAPES FOR PACKAGING SPECIFICATION | WC-Draft |
| 110 | PCD/12/24845 | POLYCARBONATE LATHI SPECIFICATION | WC-Draft |
| 111 | PCD/12/24846 | GENERAL PURPOSE PRESSURE SENSITIVE ADHESIVE CLOTH TAPES SPECIFICATION | WC-Draft |
| 112 | PCD/12/24847 | POLYSTYRENE CRYSTAL AND HIGH IMPACT FOR ITS SAFE USE IN CONTACT WITH FOODSTUFFS PHARMACEUTICALS AND DRINKING WATER SPECIFICATION | WC-Draft |
| 113 | PCD/12/24848 | PLASTICS INDUSTRIAL COMPOSTABLE PLASTIC DRINKING STRAWS | WC-Draft |
| 114 | PCD/12/24849 | PLASTICS INDUSTRIAL COMPOSTABLE PLASTIC SHOPPING BAGS | WC-Draft |
| 115 | PCD/12/24850 | PLASTICS SOIL BIODEGRADABLE MATERIALS FOR MULCH FILMS FOR USE IN AGRICULTURE AND HORTICULTURE REQUIREMENTS AND TEST METHODS REGARDING BIODEGRADATION ECOTOXICITY AND CONTROL OF CONSTITUENTS | WC-Draft |
| 116 | PCD/12/24899 | Amndment No. 3 to IS 16738 : 2018 Positive list of constituents for polypropylene, polyethylene and their copolymers for its safe use in contact with foodstuffs and pharmaceuticals | WC-Draft |
| 117 | PCD/12/24900 | Amendment No. 2 to IS 9833 : 2018 List of colourants for use in plastics in contact with foodstuffs and pharmaceuticals (Second Revision) | WC-Draft |
| 118 | PCD/12/24901 | Plastics - Vocabulary (Second Revision) Amendment - 1 | WC-Draft |
| 119 | PCD/12/24950 | ULTRAMARINE BLUE FOR PLASTICS SPECIFICATION | WC-Draft |
| 120 | PCD/12/25312 | POLYCARBONATE MOULDING AND EXTRUSION MATERIALS SPECIFICATION Amendment - 1 | WC-Draft |
| 121 | PCD/12/25645 | THERMOPLASTIC POLYESTERS PET AND PBT FOR MOULDING AND EXTRUSION SPECIFICATION | WC-Draft |
| 122 | PCD/12/25646 | DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 1: INTRODUCTION AND GENERAL INFORMATION | WC-Draft |
| 123 | PCD/12/25647 | DECORATIVE THERMOSETTING SYNTHRESIN BONDED LAMINATED SHEETS SPECIFICATION PART 2 DETERMINATION OF PROPERTIES | WC-Draft |
| 124 | PCD/12/25648 | DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 3: CLASSIFICATION AND SPECIFICATIONS FOR LAMINATES LESS THAN 2 MM THICK AND INTENDED FOR BONDING TO SUPPORTING SUBSTRATES | WC-Draft |
| 125 | PCD/12/25649 | DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 4: CLASSIFICATION AND SPECIFICATIONS FOR COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER | WC-Draft |
| 126 | PCD/12/25650 | DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 5 CLASSIFICATION AND SPECIFICATIONS FOR FLOORING GRADE LAMINATES LESS THAN 2 MM THICK INTENDED FOR BONDING TO SUPPORTING SUBSTRATES | WC-Draft |
| 127 | PCD/12/25651 | DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 6 CLASSIFICATION AND SPECIFICATIONS FOR EXTERIOR-GRADE COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER | WC-Draft |
| 128 | PCD/12/25652 | DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 7 CLASSIFICATION AND SPECIFICATIONS FOR DESIGN LAMINATES | WC-Draft |
| 129 | PCD/12/25653 | DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 8 CLASSIFICATION AND SPECIFICATIONS FOR ALTERNATIVE CORE LAMINATES | WC-Draft |
| 130 | PCD/12/25686 | Chlorinated polyvinyl chloride compounds used for pipes and fittings - Specifications Amendment - 1 | Under Published |
| 131 | PCD/12/25844 | FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS PART 1 DESIGNATION SYSTEM | WC-Draft |
| 132 | PCD/12/25847 | FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS PART 2 PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES | WC-Draft |
| 133 | PCD/12/25982 | Plastics - Acrylonitrile-butadienestyrene (abs) moulding and extrusion materials : Part 1 designation system and specifications (First Revision) Amendment - 1 | WC-Draft |
| 134 | PCD/12/25983 | Plastics - Acrylonitrile-butadiene-styrene (abs) moulding and extrusion materials : Part 2 preparation of test specimens and determination of properties Amendment - 1 | WC-Draft |
| 135 | PCD/12/25989 | Specification for polypropylene (pp) materials for moulding and extrusion (Second Revision) Amendment - 3 | F-Draft |
| 136 | PCD/13/21620 | SHEET RUBBER JOINTING AND RUBBER INSERTION JOINTING — SPECIFICATION (Third Revision) | Under Published |
| 137 | PCD/13/21656 | HOT WATER HOSE OF RUBBER — SPECIFICATION (Third Revision) | Under Published |
| 138 | PCD/13/21822 | WIRE REINFORCED RUBBER HOSE FOR SAND AND GRAVEL SUCTION AND DISCHARGE SERVICES — SPECIFICATION (First Revision) | Under Published |
| 139 | PCD/13/21838 | OIL AND SOLVENT RESISTANT HOSE OF RUBBER — SPECIFICATION (Fourth Revision) | Under Published |
| 140 | PCD/13/22204 | RUBBER HYDRAULIC HOSE WITH TEXTILE REINFORCEMENT— SPECIFICATION (First Revision) | Under Published |
| 141 | PCD/13/24810 | THERMOPLASTIC ELASTOMERS NOMENCLATURE AND ABBREVIATED TERMS | WC-Draft |
| 142 | PCD/13/24812 | RUBBER HOSES TEXTILE-REINFORCED FOR COMPRESSED AIR SPECIFICATION | WC-Draft |
| 143 | PCD/13/24813 | RUBBER HOSES AND HOSE ASSEMBLIES FOR LIQUEFIED PETROLEUM GAS LPG IN MOTOR VEHICLES SPECIFICATION | WC-Draft |
| 144 | PCD/13/24814 | RUBBER HOSES TEXTILE-REINFORCED FOR GENERAL-PURPOSE WATER APPLICATIONS SPECIFICATION | WC-Draft |
| 145 | PCD/13/24815 | RUBBER SEALS JOINT RINGS FOR WATER SUPPLY DRAINAGE AND SEWERAGE PIPELINES SPECIFICATION FOR MATERIALS | WC-Draft |
| 146 | PCD/13/24817 | RUBBER HOSES AND HOSE ASSEMBLIES FOR SAND AND GRIT BLASTING SPECIFICATION | WC-Draft |
| 147 | PCD/13/24819 | GLOSSARY OF TERMS USED IN RUBBER INDUSTRY | WC-Draft |
| 148 | PCD/13/24820 | WIRE REINFORCED RUBBER COVERED HYDRAULIC HOSE SPECIFICATION | WC-Draft |
| 149 | PCD/13/24821 | THERMOPLASTICS HOSES TEXTILE REINFORCED FOR COMPRESSED AIR SPECIFICATION | WC-Draft |
| 150 | PCD/13/24827 | RUBBER RAW NATURAL GUIDELINES AND REQUIREMENTS FOR TECHNICALLY SPECIFIED LOW-PROTEIN NATURAL RUBBER | WC-Draft |
| 151 | PCD/13/25078 | BARYTES FOR RUBBER INDUSTRY SPECIFICATION | WC-Draft |
| 152 | PCD/13/25079 | RED OXIDE OF IRON FOR RUBBER INDUSTRY SPECIFICATION | WC-Draft |
| 153 | PCD/13/25080 | WHITING FOR RUBBER INDUSTRY SPECIFICATION | WC-Draft |
| 154 | PCD/13/25081 | SULPHUR FOR RUBBER INDUSTRY SPECIFICATION | WC-Draft |
| 155 | PCD/13/25110 | TITANIUM DIOXIDE ANATASE TYPE FOR RUBBER INDUSTRY SPECIFICATION | WC-Draft |
| 156 | PCD/13/25111 | STYRENATED PHENOL SPECIFICATION | WC-Draft |
| 157 | PCD/13/25112 | EBONITE SPECIFICATION | WC-Draft |
| 158 | PCD/13/25765 | POST-MORTEM RUBBER GLOVES SPECIFICATION (First revision) | WC-Draft |
| 159 | PCD/13/25998 | VINYL PYRIDINE LATEX SPECIFICATION | WC-Draft |
| 160 | PCD/13/25999 | LIGHT MAGNESIUM OXIDE FOR RUBBER INDUSTRY SPECIFICATION | WC-Draft |
| 161 | PCD/18/14443 | DETERMINATION OF CHIRAL PURITY OF ESSENTIAL OILS BY GAS CHROMATOGRAPHY | WC-Draft |
| 162 | PCD/18/14518 | OIL OF CARROT SEED SPECIFICATION | P-Draft |
| 163 | PCD/18/21084 | OIL OF MENTHA ARVENSIS SPECIFICATION | WC-Draft |
| 164 | PCD/18/21244 | SPECIFICATION FOR AMYL SALICYLATE | P-Draft |
| 165 | PCD/18/21456 | COUMARIN - SPECIFICATION | WC-Draft |
| 166 | PCD/18/21480 | SPECIFICATION FOR BENZYL ALCOHOL | P-Draft |
| 167 | PCD/18/22269 | Oil of Lemongrass - Specification third revision | WC-Draft |
| 168 | PCD/18/23365 | OIL OF CITRONELLA JAVA SPECIFICATION | WC-Draft |
| 169 | PCD/18/23369 | PHENYL ETHYL METHYL ETHER SPECIFICATION | WC-Draft |
| 170 | PCD/18/24567 | OIL OF CLOVE LEAVES SYZYGIUM AROMATICUM L MERR ET PERRY SYN EUGENIA CARYOPHYLLUS SPRENGEL BULLOCK ET S HARRISON | WC-Draft |
| 171 | PCD/18/24568 | OIL OF CLOVE BUDS SYZYGIUM AROMATICUM L MERR ET PERRY SYN EUGENIA CARYOPHYLLUS SPRENGEL BULLOCK ET S HARRISON | WC-Draft |
| 172 | PCD/18/24569 | OIL OF CLOVE STEMS SYZYGIUM AROMATICUM L MERR ET PERRY SYN EUGENIA CARYOPHYLLUS SPRENGEL BULLOCK ET S HARRISON | WC-Draft |
| 173 | PCD/18/25032 | Thymol - Specification (Third Revision) Amendment - 1 | WC-Draft |
| 174 | PCD/18/25355 | OIL OF FRANKINCENSE - SPECIFICATION | P-Draft |
| 175 | PCD/18/25823 | INCENSE STICKS AGARBATTI SPECIFICATION | P-Draft |
| 176 | PCD/18/25877 | DETERMINATION OF FATTY ACIDS IN NATURAL AND SYNTHETIC PERFUMERY MATERIALS BY GAS CHROMATOGRAPHY | WC-Draft |
| 177 | PCD/18/25992 | OIL OF BLUE CHAMOMILE - SPECIFICATION | P-Draft |
| 178 | PCD/19/15096 | SUNSCREEN COSMETIC PRODUCTS SPECIFICATION | WC-Draft |
| 179 | PCD/19/15513 | Skin Lotion Specification | WC-Draft |
| 180 | PCD/19/17644 | CLASSIFICATION OF COSMETIC RAW MATERIALS AND ADJUNCTS - Part.2 List of Raw Materials Generally Not Recognized As Safe GNRAS And Restricted Ingredients For Use In Cosmetics | WC-Draft |
| 181 | PCD/19/17647 | Classification Of Cosmetic Raw Materials And Adjuncts - List of Preservatives Allowed In Cosmetics with Restriction Pt.3 | WC-Draft |
| 182 | PCD/19/19432 | MICROBIOLOGICAL EXAMINATION OF COSMETICS AND COSMETIC RAW MATERIALS METHODS OF TEST | WC-Draft |
| 183 | PCD/19/19444 | AUTO-OXIDATION HAIR DYES/COLOURS ― SPECIFICATION | WC-Draft |
| 184 | PCD/19/19461 | ORAL RINSES SPECIFICATION | WC-Draft |
| 185 | PCD/19/19476 | FACE WASH - SPECIFICATION | WC-Draft |
| 186 | PCD/19/19479 | FACE AND BODY SCRUB - SPECIFICATION | WC-Draft |
| 187 | PCD/19/19493 | SHOWER GEL BODY WASH SPECIFICATION | WC-Draft |
| 188 | PCD/19/19573 | SPECIFICATION FOR LIPSALVE (First Revision) | WC-Draft |
| 189 | PCD/19/20109 | Cosmetics Sun Protection Test Methods-In vivo Determination of Sun Protection Factor SPF [ISO 24444:2019 MOD] | WC-Draft |
| 190 | PCD/19/20742 | Draft AMENDMENT NO. 1 OCTOBER 2022 TO IS 17117 : 2019 HAIR SHAMPOO FOR BABIES ― SPECIFICATION | WC-Draft |
| 191 | PCD/19/23405 | COSMETICS MICROBIOLOGY EVALUATION OF THE ANTIMICROBIAL PROTECTION OF A COSMETIC PRODUCT | WC-Draft |
| 192 | PCD/19/23425 | AMENDMENT NO. 2 TO IS 8481 : 2020 OXIDATION HAIR DYES ( LIQUID / GEL / CREAM ) — SPECIFICATION (Fourth Revision) | WC-Draft |
| 193 | PCD/19/24649 | PETROLEUM JELLY FOR COSMETIC INDUSTRY - SPECIFICATION | WC-Draft |
| 194 | PCD/21/19722 | HIGH DENSITY POLYETHYLENE CONTAINERS FOR PACKING OF LIQUID PESTICIDES (UP TO 1 LITRE CAPACITY) — SPECIFICATION | Under Published |
| 195 | PCD/21/19724 | HIGH DENSITY POLYETHYLENE (HDPE) CRATES FOR MILK POUCHES — SPECIFICATION | Under Published |
| 196 | PCD/21/19728 | POLYETHYLENE POUCHES FOR PACKAGING LIQUID DAIRY PRODUCTS ― SPECIFICATION (THIRD REVISION) | Under Published |
| 197 | PCD/21/21293 | METHODS OF TEST FOR ENVIRONMENTAL STRESS-CRACK RESISTANCE OF BLOW-MOULDED POLYETHYLENE CONTAINERS | WC-Draft |
| 198 | PCD/21/21330 | POLYETHYLENE CONTAINERS FOR PHARMACEUTICAL USE - SPECIFICATION PART 1 OTHER THAN PARENTERAL AND OPHTHALMIC PREPARATIONS | WC-Draft |
| 199 | PCD/21/21332 | PLASTIC CONTAINERS FOR PHARMACEUTICAL USE - SPECIFICATION PART 2 PARENTERAL AND OPHTHALMIC PREPARATIONS | WC-Draft |
| 200 | PCD/21/21920 | Polyethylene terephthalate PET bottles for packaging of alcoholic beverages - Specification | WC-Draft |
| 201 | PCD/21/21921 | Polyethylene Terephthalate PET Containers for the Packaging of Solid and Semi-Solid Foods Including Vanaspati - Specification | WC-Draft |
| 202 | PCD/21/22060 | PLASTIC FEEDING AND DRINKING CONTAINERS ACCESSORIES AND CUTLERIES FOR INFANT AND CHILD USE SPECIFICATION | Under Published |
| 203 | PCD/21/22494 | POLYETHYLENE TEREPHATHALATE PET BOTTLES FOR PACKAGING OF EDIBLE OILS SPECIFICATION | WC-Draft |
| 204 | PCD/21/23121 | Blow Moulded Polyolefin Containers- Specification:Part 1 Upto 5 litres capacity | WC-Draft |
| 205 | PCD/21/23122 | BLOW MOULDED POLYOLEFIN CONTAINERS SPECIFICATION PART 2 OVER 5 LITRES UPTO AND INCLUDING 60 LITRES CAPACITY | WC-Draft |
| 206 | PCD/21/23123 | BLOW MOULDED POLYOLEFIN CONTAINERS SPECIFICATION PART 3 CLOSED HEAD CONTAINERS OVER 60 LITRES UPTO AND INCLUDING 250 LITRES CAPACITY | WC-Draft |
| 207 | PCD/21/23202 | POLYETHYLENE CONTAINERS FOR THE TRANSPORT OF MATERIALS SPECIFICATION | WC-Draft |
| 208 | PCD/21/23793 | PLASTIC BOTTLESCONTAINERS FOR PACKAGING OF NATURAL MINERAL WATER AND PACKAGED DRINKING WATER SPECIFICATION | WC-Draft |
| 209 | PCD/21/25596 | GLOSSARY OF TERMS IN PLASTICS AND FLEXIBLE PACKAGING EXCLUDING PAPER | WC-Draft |
| 210 | PCD/21/25951 | POLYETHYLENE BAGS FOR GENERAL PURPOSES SPECIFICATION | WC-Draft |
| 211 | PCD/26/20955 | Vinyl Sulphone ester of 2,5-dimethoxy aniline - Specification | WC-Draft |
| 212 | PCD/26/23281 | METHODS OF SAMPLING AND TESTS FOR DYE INTERMEDIATES | WC-Draft |
| 213 | PCD/26/23295 | GAMMA ACID SPECIFICATION | WC-Draft |
| 214 | PCD/26/23298 | R SALT TECHNICAL SPECIFICATION | WC-Draft |
| 215 | PCD/26/23311 | 5-SULPHOANTHRANILIC ACID - SPECIFICATION | WC-Draft |
| 216 | PCD/26/23414 | NITRODIAZO ACID SPECIFICATION | WC-Draft |
| 217 | PCD/26/23416 | J-ACID TECHNICAL SPECIFICATION | WC-Draft |
| 218 | PCD/26/23532 | 2-NITROANILINE- SPECFICATION | WC-Draft |
| 219 | PCD/26/23960 | QUINIZARIN TECHNICAL SPECIFICATION | WC-Draft |
| 220 | PCD/26/23961 | 3-BROMOBENZANTHRONE TECHNICAL SPECIFICATION | WC-Draft |
| 221 | PCD/26/23993 | 1-CHLOROANTHRAQUINONE TECHNICAL SPECIFICATION | WC-Draft |
| 222 | PCD/26/23998 | 15-DICHLOROANTHRAQUINONE TECHNICAL SPECIFICATION | WC-Draft |
| 223 | PCD/26/24021 | N N-DIMETHYLANILINE SPECIFICATION | WC-Draft |
| 224 | PCD/26/24273 | 2-CHLOROANILINE - SPECIFICATION | Project-Approval |
| 225 | PCD/26/24274 | 2-CHLOROANILINE - SPECIFICATION | WC-Draft |
| 226 | PCD/26/24276 | 4-CHLORO-2-NITROANILINE SPECIFICATION | WC-Draft |
| 227 | PCD/26/24312 | 2-Nitro Chlorobenzene Specification | WC-Draft |
| 228 | PCD/26/24346 | 3-NITRO-CHLOROBENZENE SPECIFICATION | WC-Draft |
| 229 | PCD/26/24372 | 4-NITRO-CHLOROBENZENE SPECIFICATION | WC-Draft |
| 230 | PCD/26/24466 | 2 4-DINITRO-CHLOROBENZENE SPECIFICATION | WC-Draft |
| 231 | PCD/26/24539 | 1 4-DICHLORO-2-NITROBENZENE SPECIFICATION | WC-Draft |
| 232 | PCD/26/24980 | ORTHO-CHLORO PARA-NITRO ANILINE SPECIFICATION | WC-Draft |
| 233 | PCD/26/24990 | 2-NITROTOLUENE SPECIFICATION | WC-Draft |
| 234 | PCD/26/25024 | 3-NITROTOLUENE SPECIFICATION | WC-Draft |
| 235 | PCD/26/25191 | p-TOLUIDINE SPECIFICATION | WC-Draft |
| 236 | PCD/26/25509 | o-Toluidine | WC-Draft |
| 237 | PCD/26/25528 | 1 3 DINITROBENZENE SPECIFICATION | WC-Draft |
| 238 | PCD/26/25691 | p-NITROTOLUENE TECHNICAL SPECIFICATION | WC-Draft |
| 239 | PCD/26/25738 | H acid - Specification ( Second Revision ) Amendment - 2 | Under Published |
| 240 | PCD/27/23124 | PLASTICS METHODS OF TESTING PART 9 OPTICAL PROPERTIES SECTION 9 DETERMINATION OF YELLOW INDEX AND CHANGE IN YELLOWNESS INDEX | WC-Draft |
| 241 | PCD/27/23125 | METHODS OF SAMPLING AND TEST FOR GLUES BONE SKINFLESHINGS AND FISH GLUES | WC-Draft |
| 242 | PCD/27/23126 | PLASTICS METHODS OF TESTING PART 8 PERMANENCECHEMICAL PROPERTIES SECTION 6 FILM AND SHEETING DETERMINATION OF GAS-TRANSMISSION RATE SUBSEC 1 DIFFERENTIAL-PRESSURE METHODS | WC-Draft |
| 243 | PCD/27/23127 | PLASTICS METHODS OF TESTING PART 8 PERMANENCECHEMICAL PROPERTIES SECTION 6 FILM AND SHEETING DETERMINATION OF GAS-TRANSMISSION RATE SUBSEC 2 EQUAL-PRESSURE METHOD | WC-Draft |
| 244 | PCD/27/23183 | PLASTICS METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES SECTION 4 DETERMINATION OF BULK FACTOR OF MOULDING MATERIALS | WC-Draft |
| 245 | PCD/27/23184 | PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 5 DETERMINATION OF CHARPY IMPACT PROPERTIES SUBSEC 1 NON-INSTRUMENTED IMPACT TEST | WC-Draft |
| 246 | PCD/27/23186 | PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 5 DETERMINATION OF CHARPY IMPACT PROPERTIES SUBSEC 2 INSTRUMENTED IMPACT TEST | WC-Draft |
| 247 | PCD/27/23190 | PLASTICS METHODS OF TESTING PART 4 RHEOLOGICAL PROPERTIES SECTION 1 DETERMINATION OF THE MELT MASS-FLOW RATE MFR AND THE MELT VOLUME-FLOW RATE MVR OF THERMOPLASTICS | WC-Draft |
| 248 | PCD/27/23191 | PLASTICS METHODS OF TESTING PART 11 SPECIAL PROPERTIES SECTION 9 DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS GENERAL PRINCIPLES Second Revision of IS 13360 Part 11Sec 9 | WC-Draft |
| 249 | PCD/27/24009 | PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 14 DETERMINATION OF INDENTATION HARDNESS OF RIGID PLASTIC BY MEANS OF BARCOL IMPRESSER | WC-Draft |
| 250 | PCD/27/24010 | PLASTICS METHODS OF TESTING PART 6 THERMAL PROPERTIES SECTION 9 DETERMINATION OF DENSITY OF SMOKE FROM THE BURNING OR DECOMPOSITION OF PLASTICS | WC-Draft |
| 251 | PCD/27/24011 | PLASTICS METHODS OF TESTING PART 1 INTRODUCTION | WC-Draft |
| 252 | PCD/27/24269 | PLASTICS METHODS OF TESTING PART 6 THERMAL PROPERTIES SECTION 1 DETERMINATION OF VICAT SOFTENING TEMPERATURE OF THERMOPLASTIC MATERIALS | WC-Draft |
| 253 | PCD/27/24270 | PLASTICS METHODS OF TESTING PART 2 SAMPLING AND PREPARATION OF TEST SPECIMENS SECTION 1 PLASTICS COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS | WC-Draft |
| 254 | PCD/27/24271 | PRINCIPLES FOR THE ANALYSIS OF MICROPLASTICS PRESENT IN THE ENVIRONMENT | WC-Draft |
| 255 | PCD/27/25101 | PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION XX DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS SUBSECTION 1 NON-INSTRUMENTED IMPACT TESTING | WC-Draft |
| 256 | PCD/27/25102 | PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION XX DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS SUBSECTION 2 INSTRUMENTED IMPACT TESTING | WC-Draft |
| 257 | PCD/27/25103 | PLASTICS VERIFICATION OF PENDULUM IMPACT-TESTING MACHINES CHARPY IZOD AND TENSILE IMPACT-TESTING | WC-Draft |
| 258 | PCD/27/25104 | PLASTICS METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES SECTION XX DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS | WC-Draft |
| 259 | PCD/27/25105 | PLASTICS QUANTITATIVE EVALUATION OF SCRATCH-INDUCED DAMAGE AND SCRATCH VISIBILITY | WC-Draft |
| 260 | PCD/27/25106 | PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION XX DETERMINATION OF TENSILE PROPERTIES AT HIGH STRAIN RATES | WC-Draft |
| 261 | PCD/27/25107 | PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF SCRATCH PROPERTIES | WC-Draft |
| 262 | PCD/27/25510 | PLASTICS METHODOLOGY FOR ASSESSING POLYMER PHOTOAGEING BY FTIR AND UVVISIBLE SPECTROSCOPY | WC-Draft |
| 263 | PCD/27/25511 | MEASUREMENT OF ANTIVIRAL ACTIVITY ON PLASTICS AND OTHER NON-POROUS SURFACES | WC-Draft |
| 264 | PCD/27/25512 | PLASTICS SMALL ENCLOSURES FOR CONDITIONING AND TESTING USING AQUEOUS SOLUTIONS TO MAINTAIN THE HUMIDITY AT A CONSTANT VALUE | WC-Draft |
| 265 | PCD/27/25513 | PLASTICS METHODS FOR MARINE EXPOSURE | WC-Draft |
| 266 | PCD/27/25514 | PLASTICS ASSESSMENT OF THE EFFECTIVENESS OF FUNGISTATIC COMPOUNDS IN PLASTICS FORMULATIONS | WC-Draft |
| 267 | PCD/27/25515 | PLASTICS METHODS OF EXPOSURE TO DETERMINE THE WAVELENGTH DEPENDENT DEGRADATION USING SPECTRALLY DISPERSED RADIATION | WC-Draft |
| 268 | PCD/27/25516 | MEASUREMENT OF ANTIBACTERIAL ACTIVITY ON PLASTICS AND OTHER NON-POROUS SURFACES | WC-Draft |
| 269 | PCD/27/25517 | PLASTICS ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION | WC-Draft |
| 270 | PCD/27/25518 | PLASTICS METHODS OF TESTING PART 8 PERFORMANCECHEMICAL PROPERTIES SECTION XX DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC GENERAL GUIDANCE | WC-Draft |
| 271 | PCD/27/25520 | PLASTICS METHODS OF TESTING PART 8 PERFORMANCECHEMICAL PROPERTIES SECTION XX DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC BALL OR PIN IMPRESSION METHOD | WC-Draft |
| 272 | PCD/27/25521 | PLASTICS METHODS OF TESTING PART 8 PERFORMANCECHEMICAL PROPERTIES SECTION XX DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC CONSTANT TENSILE DEFORMATION METHOD | WC-Draft |
| 273 | PCD/27/25522 | PLASTICS METHODS OF TESTING PART 8 PERFORMANCECHEMICAL PROPERTIES SECTION XX DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC SLOW STRAIN RATE METHOD | WC-Draft |
| 274 | PCD/27/25745 | PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 1 GENERAL PRINCIPLES | WC-Draft |
| 275 | PCD/27/25746 | PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 2 TORSION-PENDULUM METHOD | WC-Draft |
| 276 | PCD/27/25747 | PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 3 FLEXURAL VIBRATION RESONANCE-CURVE METHOD | WC-Draft |
| 277 | PCD/27/25748 | PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 4 TENSILE VIBRATION NON-RESONANCE METHOD | WC-Draft |
| 278 | PCD/27/25749 | PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 5 FLEXURAL VIBRATION NON-RESONANCE METHOD | WC-Draft |
| 279 | PCD/27/25750 | PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 6 SHEAR VIBRATION NON-RESONANCE METHOD | WC-Draft |
| 280 | PCD/27/25751 | PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 7 TORSIONAL VIBRATION NON-RESONANCE METHOD | WC-Draft |
| 281 | PCD/27/25752 | PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 8 LONGITUDINAL AND SHEAR VIBRATION WAVE-PROPAGATION METHOD | WC-Draft |
| 282 | PCD/27/25753 | PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 9 TENSILE VIBRATION SONIC-PULSE PROPAGATION METHOD | WC-Draft |
| 283 | PCD/27/25754 | PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 10 COMPLEX SHEAR VISCOSITY USING A PARALLEL-PLATE OSCILLATORY RHEOMETER | WC-Draft |
| 284 | PCD/27/25755 | PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 11 GLASS TRANSITION TEMPERATURE | WC-Draft |
| 285 | PCD/27/25756 | PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 12 COMPRESSIVE VIBRATION NON-RESONANCE METHOD | WC-Draft |
| 286 | PCD/29/22777 | NATURAL RUBBER LATEX- METHODS OF TEST PART 2 -DETERMINATION OF SLUDGE CONTENT ( Second Revision ) | Under Published |
| 287 | PCD/29/22797 | Rubber— Methods of Test Part 1 Measurement of vulcanization characteristics using curemeters Section 1 Introduction | Under Published |
| 288 | PCD/29/22798 | Rubber— Methods of Test Part 1 Measurement of vulcanization characteristics using curemeters Section 2 Oscillating disc curemeter | Under Published |
| 289 | PCD/29/22799 | Rubber — Methods of Test Part 1 Measurement of vulcanization characteristics using curemeters Section 3 Rotorless curemeter | Under Published |
| 290 | PCD/29/22802 | STYRENE – BUTADIENE RUBBER — METHOD OF TEST PART 4 DETERMINATION OF THE MICROSTRUCTURE OF SOLUTION-POLYMERIZED SBR Section 1 1H-NMR AND IR WITH CAST-FILM METHOD | Under Published |
| 291 | PCD/29/22803 | STYRENE – BUTADIENE RUBBERS — METHODS OF TEST PART 4 DETERMINATION OF THE MICROSTRUCTURE OF SOLUTION-POLYMERIZED SBR Section 2 FTIR WITH ATR METHOD | Under Published |
| 292 | PCD/29/22805 | METHODS OF TEST FOR NATURAL RUBBER LATEX PART 6 DETERMINATION OF MECHANICAL STABILITY (second revision) | Under Published |
| 293 | PCD/29/22806 | RUBBER LATEX — METHODS OF TEST PART 2 DETERMINATION OF VISCOSITY (Second Revision ) | Under Published |
| 294 | PCD/29/22807 | STYRENE – BUTADIENE RUBBERS — METHODS OF TEST PART 3 DETERMINATION OF BOUND STYRENE CONTENT — REFRACTIVE INDEX METHOD | Under Published |
| 295 | PCD/29/22871 | Methods of Test for Rubber Part 2 Determination of styrene content — Nitration method | Under Published |
| 296 | PCD/29/24828 | METHODS OF TEST FOR VULCANIZED RUBBERS PART 20 RESISTANCE TO OZONE CRACKING STATIC STRAIN TEST | WC-Draft |
| 297 | PCD/29/24829 | METHODS OF TEST FOR VULCANIZED RUBBERS PART 26 DETERMINATION OF SHEAR MODULUS AND ADHESION TO RIGID PLATES QUADRUPLE-SHEAR METHODS | WC-Draft |
| 298 | PCD/29/24833 | STYRENE-BUTADIENE RUBBER SBR EMULSION AND SOLUTION-POLYMERIZED TYPES EVALUATION PROCEDURES | WC-Draft |
| 299 | PCD/29/24834 | RECLAIMED RUBBER DERIVED FROM PRODUCTS CONTAINING MAINLY NATURAL RUBBER EVALUATION PROCEDURE | WC-Draft |
| 300 | PCD/29/24835 | RECLAIMED ISOBUTENE-ISOPRENE IIR RUBBER EVALUATION PROCEDURE | WC-Draft |
| 301 | PCD/25/14340 | MULTIPURPOSE GREASE FOR AUTOMOTIVE APPLICATIONS― SPECIFICATION | WC-Draft |
| 302 | PCD/25/14360 | Wheel Bearing Grease | WC-Draft |
| 303 | PCD/25/14904 | All weather antiwear hydraulic oils - Specification | WC-Draft |
| 304 | PCD/25/18597 | Straight mineral high demulsibility oils - Specification | Under Published |
| 305 | PCD/25/18660 | Quenching oil - Specification Third Revision | Under Published |
| 306 | PCD/25/22800 | LUBRICANTS FOR SPARK-IGNITION AIR-COOLED GASOLINE ENGINES SPECIFICATION Part 2 Four-Stroke Spark-Ignition Air-Cooled Engines for Scooters Mopeds and Motorcycles | WC-Draft |
| 307 | PCD/25/23352 | LUBRICANTS INDUSTRIAL OILS AND RELATED PRODUCTS CLASS L FAMILY D COMPRESSORS PART 1 : SPECIFICATIONS OF CATEGORIES DAA AND DAB LUBRICANTS FOR RECIPROCATING AND DRIP FEED ROTARY AIR COMPRESSORS | Under Published |
| 308 | PCD/25/23378 | BIODEGRADABLE LUBRICATING GREASES SPECIFICATION | P-Draft |
| 309 | PCD/25/23946 | LUBRICANTS INDUSTRIAL OILS AND RELATED PRODUCTS CLASS L FAMILY H HYDRAULIC SYSTEMS SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE HFAS HFB HFC HFDR AND HFDU | WC-Draft |
| 310 | PCD/25/25017 | LUBRICANTS INDUSTRIAL OILS AND RELATED PRODUCTS CLASS L FAMILY H HYDRAULIC SYSTEMS SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HETG HEPG HEES AND HEPR | WC-Draft |
| 311 | PCD/25/25088 | SPECIFICATION FOR SYNTHETIC GRINDING FLUID | WC-Draft |
| 312 | PCD/25/25117 | GENERAL PURPOSE GREASE FOR DEFENCE APPLICATIONS SPECIFICATION | WC-Draft |
| 313 | PCD/25/25217 | GEAR LUBRICANTS FOR ENCLOSED INDUSTRIAL GEAR DRIVES SPECIFICATION | WC-Draft |
| 314 | PCD/25/25403 | PETROLEUM AND RELATED PRODUCTS REQUIREMENTS AND GUIDANCE FOR THE MAINTENANCE OF TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS | WC-Draft |
| 315 | PCD/25/25990 | HYDRAULIC FLUID POWER FIRE-RESISTANT FLUIDS REQUIREMENTS AND GUIDELINES FOR USE | WC-Draft |
| 316 | PCD/30/24680 | SAFETY OF TOYS PART 1: SAFETY ASPECTS RELATED TO MECHANICAL AND PHYSICAL PROPERTIES | WC-Draft |
| 317 | PCD/30/24681 | SAFETY OF TOYS PART 2 FLAMMABILITY | WC-Draft |
| 318 | PCD/30/24683 | SAFETY OF TOYS PART 6 DETERMINATION OF CERTAIN PHTHALATE ESTERS IN TOYS | WC-Draft |
| 319 | PCD/30/24684 | Safety of Toys Part 3 Migration of Certain Elements ( Third Revision ) Amendment - 1 | WC-Draft |
| 320 | PCD/30/24685 | Safety of toys: Part 7 requirements and test methods for finger paints Amendment - 1 | Under Published |
| 321 | PCD/30/24691 | SAFETY OF TOYS PART 11: CHEMICAL TOYS SETS OTHER THAN EXPERIMENTAL SETS | Under Published |
| 322 | PCD/30/24692 | SAFETY OF TOYS PART 10: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES | Under Published |
| 323 | PCD/30/25546 | SAFETY OF TOYS PART 12: SAFETY ASPECTS RELATED TO MECHANICAL AND PHYSICAL PROPERTIES COMPARISON OF ISO 8124-1 EN 71-1 AND ASTM F963 | WC-Draft |