| S. No. |
Doc. NO. | Document Title | Stage |
|---|---|---|---|
| 1 | LITD/04/21787 | Measurement of the electrical properties of microwave tubes Part 11: General measurements | WC-Draft |
| 2 | LITD/04/21788 | Measurement of the Electrical Properties of Microwave Tubes Part 4: Magnetrons (First Revision) | WC-Draft |
| 3 | LITD/04/21789 | Measurement of the electrical properties of microwave tubes Part 6: Low-power oscillator klystrons (First Revision) | WC-Draft |
| 4 | LITD/04/21790 | Measurement of the electrical properties of microwave tubes Part 7: High-power klystrons (First Revision) | WC-Draft |
| 5 | LITD/04/21792 | Measurement of the Electrical Properties of Microwave Tubes – Part 8: Gas-Filled Microwave Switching Devices (First Revision) | WC-Draft |
| 6 | LITD/04/21794 | Measurement of the Electrical Properties of Microwave Tubes – Part 9: Backward-Wave Oscillator Tubes - '0' Type (First Revision) | WC-Draft |
| 7 | LITD/04/21795 | Measurement of the Electrical Properties of Microwave Tubes – Part 10: Crossed-Field Amplifier Tubes (First Revision) | WC-Draft |
| 8 | LITD/06/23343 | Coaxial communication cables Part 6: Sectional specification for CATV drop cables First Revision | Under Published |
| 9 | LITD/06/23344 | Coaxial communication cables Part 6-1 Blank detail specification for CATV drop cables First Revision | F-Draft |
| 10 | LITD/06/23345 | Coaxial communication cables Part 1-104: Electrical test methods Test for the stability of the capacitance of cable versus temperature First Revision | Finalization |
| 11 | LITD/06/23346 | Coaxial Communication Cables – Part 1: Environmental Test Methods – Section 200: General Requirements (First Revision) | Finalization |
| 12 | LITD/06/23347 | Passive RF and microwave devices intermodulation level measurement Part 1: General requirements and measuring methods First Revision | Finalization |
| 13 | LITD/06/23348 | Metallic Communication Cable Test Methods – Part 4: Electromagnetic Compatibility (EMC) Sec 5: Screening or Coupling Attenuation – Absorbing Clamp Method (First Revision) | Under Published |
| 14 | LITD/06/23349 | Hybrid telecommunication cables Part 1: Generic specification | WC-Draft |
| 15 | LITD/06/23350 | Hybrid communication cables Part 3-10: Outdoor hybrid cables Family specification for FTTA hybrid communication cables | WC-Draft |
| 16 | LITD/06/23351 | Hybrid Communication Cables Part 3: Outdoor Hybrid Cables Sectional Specification | WC-Draft |
| 17 | LITD/06/25556 | Electrotechnical Vocabulary Part 726: Transmission Lines and Waveguides (First Revision) | WC-Draft |
| 18 | LITD/06/25557 | Multicore and Symmetrical PairQuad Cables for Digital Communications Part 1: Generic Specification Second Revision | WC-Draft |
| 19 | LITD/06/25558 | Coaxial Communication Cables Part 1: Electrical Test Methods Section 100: General Requirements First Revision | WC-Draft |
| 20 | LITD/06/25559 | Coaxial Communication Cables Part 1: Electrical Test Methods Section 103: Test for Capacitance of Cable (First Revision) | WC-Draft |
| 21 | LITD/06/25572 | Coaxial communication cables Part 1-108: Electrical test methods Test for characteristic impedance phase and group delay electrical length and propagation velocity First Revision | WC-Draft |
| 22 | LITD/06/25574 | Coaxial Communication Cables – Part 1: Electrical Test Methods – Section 111: Stability of Phase Test Methods (First Revision) | WC-Draft |
| 23 | LITD/06/25575 | Coaxial Communication Cables Part 1: Environmental Test Methods Section 206: Climatic Sequence (First Revision) | WC-Draft |
| 24 | LITD/06/25576 | Coaxial communication cables Part 8-1: Blank detail specification for semi-flexible cables with fluoropolymer dielectric First Revision | WC-Draft |
| 25 | LITD/08/25354 | Nuclear power plants - Instrumentation control and electrical power systems important to safety - Categorization of functions and classification of systems | WC-Draft |
| 26 | LITD/11/23459 | Optical fibres Part 2-50: Product specifications Sectional specification for class B singlemode fibres | Project-Approval |
| 27 | LITD/11/23466 | Safety of laser products Part 2: Safety of optical fibre communication systems OFCSs (Superseding IS 14624(Part 2): 2012) | WC-Draft |
| 28 | LITD/11/23467 | Optical fibres Part 1-1: Measurement methods and test procedures General and guidance | WC-Draft |
| 29 | LITD/11/23468 | Optical Fibre Cables Part 1 Generic Specification Section 1 General (Second Revision) | WC-Draft |
| 30 | LITD/11/23469 | Optical Fibre Cables Part 1 Generic Specification Section 2 Basic optical cable test procedures – General guidance (First Revision) | WC-Draft |
| 31 | LITD/11/23480 | Optical Fibre Cables Part 2 Indoor Optical Fibre Cables Section 10 Family specification for simplex and duplex cables (First Revision) | WC-Draft |
| 32 | LITD/15/19974 | Information technology - Guidelines for the organization and representation of data elements for data interchange Coding methods and principles | Under Published |
| 33 | LITD/15/21709 | Information Technology Metadata Registries ( MDR ) Part 3 Registry Metamodel and Basic Attributes | F-Draft |
| 34 | LITD/15/22597 | Information technology Programming languages Fortran Part 1: Base language First Revision | F-Draft |
| 35 | LITD/15/22628 | Information technology — Metadata registries (MDR) — Part 3: Metamodel for registry common facilities (First Revision) | F-Draft |
| 36 | LITD/15/22629 | Information Technology Database Languages SQL Part 13 SQL Routines and Types Using the JavaTM Programming Language SQL JRT | F-Draft |
| 37 | LITD/15/22630 | Information Technology Database Languages SQL Part 14 XML Related Specifications SQL XML | F-Draft |
| 38 | LITD/16/17422 | Identification Cards — Contactless Integrated Circuit Cards — Proximity Cards — Multiple PICCs in a Single PCD Field | Under Published |
| 39 | LITD/16/18910 | Identification cards Physical characteristics | Under Published |
| 40 | LITD/16/19783 | Cards and security devices for personal identification - Test methods - Part 6: Contactless proximity objects (First Revision) | F-Draft |
| 41 | LITD/16/19787 | Identification Cards - Integrated Circuit Cards Part 6: Interindustry Data Elements for Interchange Third Revision | F-Draft |
| 42 | LITD/16/19788 | Identification cards - Integrated circuit cards: Part 12 cards with contacts - USB electrical interface and operating procedures Amendment - 1 | F-Draft |
| 43 | LITD/01/25091 | Environmental testing Part 2 Tests Section 14 Test N: Change of temperature | WC-Draft |
| 44 | LITD/01/25092 | Basic Environmental Testing Procedures Part 2 Tests Section 17 Test Q: Sealing | WC-Draft |
| 45 | LITD/02/23128 | Weibull Analysis | WC-Draft |
| 46 | LITD/02/23129 | Equipment Reliability Reliability assessment methods | WC-Draft |
| 47 | LITD/02/23130 | Obsolescence management ( Superseding IS 16958 : 2018) | WC-Draft |
| 48 | LITD/02/23131 | Electric components Reliability Reference conditions for failure rates and stress models for conversion (Superseding IS 7354 (Part 3): 2011) | WC-Draft |
| 49 | LITD/02/23165 | Mathematical expressions for reliability availability maintainability and maintenance support terms | WC-Draft |
| 50 | LITD/02/23166 | Reliability growth Stress testing for early failures in unique complex systems | WC-Draft |
| 51 | LITD/02/23167 | Spare Parts Provisioning | WC-Draft |
| 52 | LITD/02/23168 | Root cause analysis RCA | WC-Draft |
| 53 | LITD/03/23483 | Connectors for electronic equipment - Part - 4 Tests and measurements - Section - 1: Voltage stress tests - Test 4a: Voltage proof | Under Published |
| 54 | LITD/03/23486 | Connectors for electronic equipment Part -4 Tests and measurements Section - 2: Voltage stress tests - Test 4b: Partial discharge | F-Draft |
| 55 | LITD/03/23487 | Connectors for electronic equipment Part - 4 Tests and measurements Section - 3: Voltage stress tests - Test 4c: Voltage proof of pre-insulated crimp barrels | F-Draft |
| 56 | LITD/03/23495 | Connectors for electronic equipment Part 2 Tests and measurements Section 1: Electrical continuity and contact resistance tests Test 2a: Contact resistance Millivolt level method | F-Draft |
| 57 | LITD/03/23496 | Connectors for electronic equipment Part 2 Tests and measurements Section 2: Electrical continuity and contact resistance tests Test 2b: Contact resistance Specified test current method | F-Draft |
| 58 | LITD/03/23497 | Connectors for electronic equipment Part 2 Tests and measurements Section 3: Electrical continuity and contact resistance tests Test 2c: Contact resistance variation | F-Draft |
| 59 | LITD/03/23498 | Connectors for electronic equipment Part 2 Tests and measurements Section -5: Electrical continuity and contact resistance tests Test 2e: Contact disturbance | F-Draft |
| 60 | LITD/03/23499 | Connectors for electronic equipment Part 2 Tests and measurements Section 6: Electrical continuity and contact resistance tests Test 2f: Housing shell electrical continuity | F-Draft |
| 61 | LITD/03/23500 | Connectors for electronic equipment Part 3 Tests and measurements Section 1: Insulation tests Test 3a: Insulation resistance | F-Draft |
| 62 | LITD/05/16543 | Printed Circuit Boards Part 1 Safety Requirements | Finalization |
| 63 | LITD/05/16612 | Printed Circuit Board Assembly Part 1 Safety Requirements | WC-Draft |
| 64 | LITD/05/18473 | Fixed capacitors for use in electronic equipment Part 9: Sectional specification: Fixed capacitors of ceramic dielectric Class 2 Superseding IS 2786 Part 1: 1978 and ISQC 300700: 1994 | Under Published |
| 65 | LITD/05/23249 | Environmental Testing Part 2: Tests Section 21: Test U: Robustness of Terminations and Integral Mounting Devices Superseding IS 9000 Part 19Section 1 to 5:1986 | F-Draft |
| 66 | LITD/05/23250 | Fixed resistors for use in electronic equipment Part 2 Sectional specification: Low-power film resistors with leads for through-hole assembly on circuit boards (THT) | F-Draft |
| 67 | LITD/05/23252 | Fixed resistors for use in electronic equipment Part 2 Blank detail specification Section 10 Low-power film resistors with leads for through-hole assembly on circuit boards (THT), for general electronic equipment, classification level G | F-Draft |
| 68 | LITD/05/23253 | Fixed resistors for use in electronic equipment Part 4: Sectional specification: Power resistors for through hole assembly on circuit boards THT or for assembly on chassis Superseding ISQC 400200 : 1992 | F-Draft |
| 69 | LITD/05/23254 | Fixed Capacitors for use in Electronic Equipment Part 1 Generic Specification | F-Draft |
| 70 | LITD/05/23255 | Fixed Capacitors for use in Electronic Equipment Part 1 Generic Specification Section 1 Blank Detail Specification | F-Draft |
| 71 | LITD/05/23256 | Fixed Capacitors for use in Electronic Equipment Part 2 Sectional Specification - Fixed Metallized Polyethylene Terephthalate Film Dielectric DC Capacitors | F-Draft |
| 72 | LITD/05/23257 | Fixed Capacitors for use in Electronic Equipment Part 14:Sectional Specification - Fixed Capacitors for Electromagnetic Interference Suppression and Connection to the Supply Mains Superseding ISQC 302400:1994 | F-Draft |
| 73 | LITD/05/23258 | Thermistors Directly heated positive temperature coefficient Part 1 Generic specification | F-Draft |
| 74 | LITD/05/23273 | Semiconductor Devices � Discrete Devices Part 7 Bipolar Transistors ( First Revision ) Amendment - 1 | WC-Draft |
| 75 | LITD/05/23274 | Semiconductor Devices � Discrete Devices Part 8 Field-Effect Transistors ( Second Revision ) Amendment - 1 | WC-Draft |
| 76 | LITD/05/25416 | Varistors for use in Electronic Equipment Part 1: Generic Specification | WC-Draft |
| 77 | LITD/05/25417 | Fixed Capacitors for use in Electronic Equipment Part 11: Sectional Specification Fixed Polyethylene-Terephthalate Film Dielectric Metal Foil DC Capacitors | WC-Draft |
| 78 | LITD/05/25418 | Fixed Capacitors for use in Electronic Equipment Part 8: Sectional Specification Fixed Capacitors of Ceramic Dielectric Class 1 | WC-Draft |
| 79 | LITD/05/25420 | Fixed Capacitors for use in Electronic Equipment Part 3: Sectional Specification Surface Mount Fixed Tantalum Electrolytic Capacitors with Solid MnO2 Electrolyte | WC-Draft |
| 80 | LITD/07/20466 | Specification for Body Level Hearing Aids | WC-Draft |
| 81 | LITD/07/22081 | Interoperability Specifications and Communication Method for External Power Supplies used with Computing and Consumer Electronics Devices | Finalization |
| 82 | LITD/07/22082 | Universal Serial Bus Interfaces for Data and Power - Part 4-1: Universal Serial Bus 4 Specification | Finalization |
| 83 | LITD/07/22583 | Digital Audio Interface - Part 3 Consumer Applications Second Revision | Finalization |
| 84 | LITD/07/22587 | Cabled distribution systems for television and sound signals: Part 9 interfaces of cabled distribution systems for digitally modulated signals Amendment - 1 | Finalization |
| 85 | LITD/07/22588 | Sound System Equipment Part 7: Headphones and Earphones Second Revision | Finalization |
| 86 | LITD/07/22609 | Sound System Equipment Listening Tests on Loudspeakers (First Revision) | Finalization |
| 87 | LITD/07/22612 | Digital Audio Interface - Part 4: Professional Applications - Section 2: Metadata and Subcode | Finalization |
| 88 | LITD/07/22614 | Digital Audio Interface - Part 4: Professional Applications - Section 4: Physical and Electrical Parameters | Finalization |
| 89 | LITD/07/22716 | Cable Networks for Television Signals Sound Signals and Interactive Services - Part 3: Active Wideband Equipment for Cable Networks | Finalization |
| 90 | LITD/07/22717 | Cable Networks for Television Signals Sound Signals and Interactive Services -Part 4: Passive Wideband Equipment for Coaxial Cable Networks First Revision | Finalization |
| 91 | LITD/07/22718 | Acoustics - Preferred frequencies (First Revision) | Finalization |
| 92 | LITD/07/22719 | Underwater acoustics - Hydrophones – Properties of hydrophones in the frequency range 1 Hz to 500 kHz (First Revision) | Finalization |
| 93 | LITD/07/22720 | Cable Networks for Television Signals Sound Signals and Interactive Services - Part 5: Headend Equipment First Revision | Finalization |
| 94 | LITD/07/22721 | Scales and Sizes for Plotting Frequency Characteristics and Polar Diagrams(Second Revision) | Finalization |
| 95 | LITD/07/22723 | Cable Networks for Television Signals Sound Signals and Interactive Services - Part 7: Electromagnetic Compatibility of Systems First Revision | Finalization |
| 96 | LITD/07/22738 | Cable networks for television signals sound signals and interactive services Part 1: System performance of forward paths First Revision | Finalization |
| 97 | LITD/07/22801 | Hearing aids - Dimensions of electrical connecter systems (Second Revision) | Finalization |
| 98 | LITD/07/22836 | Acoustics Description Measurement and Assessment of Environmental Noise Part 2: Determination of Sound Pressure Levels | Finalization |
| 99 | LITD/07/22837 | Acoustics Description Measurement and Assessment of Environmental Noise Part 1: Basic Quantities and Assessment Procedures | Finalization |
| 100 | LITD/07/22855 | Time and control code | Finalization |
| 101 | LITD/07/23060 | Electroacoustics - Hearing Aids - Part 9: Methods of Measurement of The Performance Characteristics of Bone Conduction Hearing Aids First Revision | Finalization |
| 102 | LITD/07/23062 | Electroacoustics Simulators of Human Head and Ear Part 6: Mechanical Coupler for The Measurement of Bone Vibrators First Revision | Finalization |
| 103 | LITD/07/23064 | Acoustics Reference Zero for The Calibration of Audiometric Equipment Part 3: Reference Equivalent Threshold Vibratory Force Levels For Pure Tones and Bone Vibrators | Finalization |
| 104 | LITD/07/23065 | Methods of measurement on radio receivers for various classes of emission Part 3: Receivers for amplitude-modulated sound-broadcasting emissions First Revision | Finalization |
| 105 | LITD/07/23066 | Methods of measurement on radio receivers for various classes of emission Part 1: General considerations and methods of measurement including audio-frequency measurements First Revision | Finalization |
| 106 | LITD/07/23067 | Method of measurement of speed fluctuations in sound recording and reproducing equipment First Revision | Finalization |
| 107 | LITD/07/23762 | C - Band parabolic dish antenna Specification | P-Draft |
| 108 | LITD/07/23763 | Specification for megaphones | P-Draft |
| 109 | LITD/07/23764 | Satellite receiver Specification | P-Draft |
| 110 | LITD/07/23794 | Audiovideo Information and Communication Technology Equipment - Part 1: Safety Requirements Second Revision | Finalization |
| 111 | LITD/07/24432 | Cable Distribution System for Television and Sound Signals Part 10: Optical Equipment Consumption First Revision | WC-Draft |
| 112 | LITD/07/24433 | Desktop and Notebook Computers Measurement of Energy Consumption First Revision | Finalization |
| 113 | LITD/07/24444 | Audio Video and Related Equipment- Determination of Power Consumption Part 3: Television Sets First Revision | WC-Draft |
| 114 | LITD/07/24465 | Electroacoustics Hearing Aids- Part 0: Measurement of the Performance Characteristics of Hearing Aids First Revision | WC-Draft |
| 115 | LITD/07/24643 | Behind the Ear BTE Hearing Aids Digital Specification | WC-Draft |
| 116 | LITD/07/24644 | Specification for Body Level Hearing Aids | WC-Draft |
| 117 | LITD/09/18772 | Limits and Methods of Measurement of Radio Disturbance Characteristics PART 2 Electromagnetic Compatibility (EMC) — Requirements for Household Appliances, Electric Tools and Similar Apparatus Section 1 Emission ( Fourth Revision) | Under Published |
| 118 | LITD/09/24954 | Electromagnetic Compatibility EMC Part 1: General Section 1: Application and Interpretation of Fundamental Definitions and Terms First Revision | WC-Draft |
| 119 | LITD/09/24955 | Electromagnetic Compatibility EMC Part 4: Testing and Measurement Techniques Section 6: Immunity to Conducted Disturbances Induced by Radio-Frequency Fields First Revision | WC-Draft |
| 120 | LITD/09/24956 | Electromagnetic Compatibility EMC Part 5: Installation and Mitigation Guidelines Section 1: General Considerations | WC-Draft |
| 121 | LITD/09/24957 | Electromagnetic Compatibility EMC Part 5: Installation and Mitigation Guidelines Section 2: Earthing and Cabling | WC-Draft |
| 122 | LITD/09/24959 | Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-worn wireless communication devices - Human models instrumentation and procedures Frequency range of 4 MHz to 10 GHz | WC-Draft |
| 123 | LITD/09/25161 | Vehicles Boats and Internal Combustion Engines - Radio Disturbance Characteristics Limits and Methods of Measurement for the Protection of On-Board Receivers | WC-Draft |
| 124 | LITD/09/25162 | Determination of RF field strength power density and SAR in the vicinity of base stations for the purpose of evaluating human exposure | WC-Draft |
| 125 | LITD/09/25163 | Assessment of Power Density of Human Exposure to Radio Frequency Fields from Wireless Devices in Close Proximity to the Head and Body Frequency Range of 6 Ghz to 300 Ghz Part 1: Measurement Procedure | WC-Draft |
| 126 | LITD/09/25164 | Assessment of Power Density of Human Exposure to Radio Frequency Fields from Wireless Devices in Close Proximity to the Head and Body Frequency Range of 6 Ghz to 300 Ghz Part 2 Computational Procedure | WC-Draft |
| 127 | LITD/10/24782 | Power Control Systems Security Requirements First Revision | WC-Draft |
| 128 | LITD/10/25115 | Guidelines for Supervisory Control and Data Acquisition (SCADA) System Displays Amendment - 1 | WC-Draft |
| 129 | LITD/14/19326 | Information Technology - Adequacy of Organizational Data Governance and Management Practices | Under Published |
| 130 | LITD/14/21947 | Systems and software engineering- System life cycle processes (Second Revision) | Under Published |
| 131 | LITD/14/21948 | Information technology Service management Part 5: Implementation guidance for IS/ISO/IEC 20000-1 (First Revision) | Under Published |
| 132 | LITD/14/21949 | Software, Systems and Enterprise — Architecture Description (First Revision) | Under Published |
| 133 | LITD/14/25192 | Information technology Governance of IT for the organization | Project-Approval |
| 134 | LITD/14/25193 | Information technology IT Enabled Services-Business Process Outsourcing ITES-BPO lifecycle processes Part 6: Guidelines on risk management | Project-Approval |
| 135 | LITD/14/25194 | Information technology IT Enabled Services-Business Process Outsourcing ITES-BPO lifecycle processes Part 7: Exemplar for maturity assessment | Project-Approval |
| 136 | LITD/14/25197 | Information technology -IT Enabled Services-Business Process Outsourcing ITES-BPO lifecycle processes Part 8: Continual performance improvement CPI of ITES-BPO | Project-Approval |
| 137 | LITD/14/25198 | Information technology IT Enabled Services-Business Process Outsourcing ITES-BPO lifecycle processes Part 9: Guidelines on extending process capability assessment for digital transformation | Project-Approval |
| 138 | LITD/14/25199 | Systems and software engineering Engineering and management of websites for systems software and services information | Project-Approval |
| 139 | LITD/14/26055 | Information Technology - IT Enabled Serives - Business Process Outsouring ITES-BPO Part 4 Process Assessment Model PAM First Revision | Project-Approval |
| 140 | LITD/14/26057 | Systems and software engineering Requirements for designers and developers of user documentation Second Revision | Project-Approval |
| 141 | LITD/17/19143 | Internet of Things Security Privacy Part 3: Assessment and Evaluation | WC-Draft |
| 142 | LITD/17/24467 | Cybersecurity Security Recommendations For Establishing Trusted Connections Between Devices and Services | Finalization |
| 143 | LITD/17/24473 | Cybersecurity Supplier Relationships Part 3: Guidelines for Hardware Software and Services Supply Chain Security | Finalization |
| 144 | LITD/17/25318 | Information Technology — Security Techniques— Storage Security (First revision) | WC-Draft |
| 145 | LITD/17/25330 | Information Technology Security Techniques Privacy Framework (First revision) | WC-Draft |
| 146 | LITD/17/25331 | Cybersecurity IoT Security and Privacy Device Baseline Requirements | WC-Draft |
| 147 | LITD/17/25334 | Information Technology Electronic Discovery Part 2: Guidance for Governance and Management of Electronic Discovery | WC-Draft |
| 148 | LITD/17/25335 | Cybersecurity and Privacy Protection Information Security Controls Based on ISOIEC 27002 for Telecommunications Organizations Second revision | WC-Draft |
| 149 | LITD/17/25400 | Information security cybersecurity and privacy protection Information security management systems Requirements Amendment - 1 | WC-Draft |
| 150 | LITD/20/21706 | Indian Language Technologies - Transliteration of Indic Scripts into Latin Characters | WC-Draft |
| 151 | LITD/20/23315 | Information Processing Implementation of the 7- Bit Coded Character Set and its 7- Bit and 8-Bit Extensions on 9- Track 127 mm 05 in Magnetic Tape First Revision | WC-Draft |
| 152 | LITD/20/23329 | Information Processing Implementation of the 7- Bit Coded Character Set and its 7- Bit and 8- Bit Extensions on 381 mm Magnetic Cassette for Data Interchange (First Revision) | WC-Draft |
| 153 | LITD/20/23386 | Information technology - Character code structure and extension techniques (First Revision) Amendment - 1 | WC-Draft |
| 154 | LITD/20/24462 | Devnagari Script Behaviour for Hindi | WC-Draft |
| 155 | LITD/20/26056 | Indian Language Technologies and Products Devangar Script Behaviour for ICT Part 1: Script Behaviour for Marathi Guidelines | P-Draft |
| 156 | LITD/20/26058 | Indian Language Technologies and Products Malayalam Script Behaviour for ICT Part 3: Script Behaviour for Malayalam Guidelines | P-Draft |
| 157 | LITD/19/23078 | Code of Practice for Designing Online Course Contents and Quality Assessment of Course Content Delivery Platform Part 1: Course Content Preparation Current Practices and Compliance Verification Criteria | WC-Draft |
| 158 | LITD/19/23080 | Code of Practice for Designing Online Course Contents and Quality Assessment of Course Content Delivery Platform Part 2: Online Course Contents Quality Model and Assessment Methodology | WC-Draft |
| 159 | LITD/19/23081 | Code of Practice for Designing Online Course Contents and Quality Assessment of Course Content Delivery Platform Part 3: Online course hosting platform quality model and assessment methodology | WC-Draft |
| 160 | LITD/19/24426 | Information technology Individualized adaptability and accessibility in e-learning education and training Part 4: Access for all framework for individualized accessibility and registry server application programming interface API | Under Published |
| 161 | LITD/19/24439 | Requirements for E-Textbooks in Education | WC-Draft |
| 162 | LITD/19/25319 | Information technology for learning education and training Learning analytics interoperability Part 4: Privacy and data protection policies | WC-Draft |
| 163 | LITD/19/25541 | Information technology for learning education and training Reference framework of e-Portfolio information | WC-Draft |
| 164 | LITD/22/22758 | Standard representation of geographic point location by coordinates (Second Revision) | F-Draft |
| 165 | LITD/22/22759 | Geographic information – Geospatial API for features — Part 2: Coordinate Reference Systems by Reference | F-Draft |
| 166 | LITD/22/23096 | Airborne LiDAR data acquisition Part 1 Requirements | WC-Draft |
| 167 | LITD/22/23729 | Geographic information Geography Markup Language GML Part 1: Fundamentals | F-Draft |
| 168 | LITD/22/23730 | Geographic information Reference model Part 1: Fundamentals | Under Published |
| 169 | LITD/22/23731 | Geographic information Reference model Part 2: Imagery | Under Published |
| 170 | LITD/22/23732 | Geographic information Conformance and testing | F-Draft |
| 171 | LITD/22/23733 | Addressing Part 1: Conceptual model | WC-Draft |
| 172 | LITD/22/23736 | Addressing Part 3: Address data quality | WC-Draft |
| 173 | LITD/22/23737 | Addressing Part 4: International postal address components and template language | WC-Draft |
| 174 | LITD/22/25213 | DataContent Standard for Geospatial Information Part 1 - Soils | Project-Approval |
| 175 | LITD/22/25214 | DataContent Standard for Geospatial Information - Part 2 Forestry | Project-Approval |
| 176 | LITD/22/25215 | DataContent Standard for Geospatial Information - Part 3 Geology | Project-Approval |
| 177 | LITD/22/25216 | Navic Receiver | P-Draft |
| 178 | LITD/22/25536 | Geographic Information Conceptual Schema Language | Project-Approval |
| 179 | LITD/22/25537 | Geographic Information Land Administration Domain Model LADM | Project-Approval |
| 180 | LITD/22/25845 | Geospatial Information Functional Areas Administrative Boundaries | P-Draft |
| 181 | LITD/23/23684 | Information technology - Computer graphics and image processing - Graphical Kernel System GKS Part 4: Picture part archive | Under Published |
| 182 | LITD/23/24383 | Draft Indian Standard Information Technology Coding of Audio-Visual Objects Part 10: Advanced Video Coding | F-Draft |
| 183 | LITD/23/24385 | Information Technology Coding of Audio-Visual Objects Part 12: ISO Base Media File Format | F-Draft |
| 184 | LITD/23/25552 | Information Technology Computer Graphics Image Processing and Environmental Data Representation Information Model For Mixed and Augmented Reality Content Core Objects and Attributes | WC-Draft |
| 185 | LITD/23/25553 | Information Technology Computer Graphics Image Processing and Environmental Data Representation Style Representation for Mixed and Augmented Reality | WC-Draft |
| 186 | LITD/23/25554 | Information Technology Computer Graphics Image Processing and Environment Data Representation ObjectEnvironmental Representation For Image-Based Rendering In VirtualMixed and Augmented Reality VRMAR | WC-Draft |
| 187 | LITD/23/25555 | Information Technology Computer Graphics Image Processing and Environmental Data Representation Guidelines for Representation and Visualization of Smart Cities | WC-Draft |
| 188 | LITD/23/25591 | Information technology Computer graphics image processing and environmental representation Sensor representation in mixed and augmented reality | WC-Draft |
| 189 | LITD/23/25592 | Information technology Computer graphics image processing and environmental data representation Mixed and augmented reality MAR reference model | WC-Draft |
| 190 | LITD/23/25593 | Information technology Computer graphics image processing and environmental data representation Live actor and entity representation in mixed and augmented reality MAR | WC-Draft |
| 191 | LITD/23/25594 | Information technology Computer graphics image processing and environmental data representation Benchmarking of vision-based spatial registration and tracking methods for mixed and augmented reality MAR | WC-Draft |
| 192 | LITD/24/17176 | Electrotechnical Vocabulary Chapter 221 : Magnetic materials and components | Under Published |
| 193 | LITD/26/22102 | X-RAY BAGGAGE INSPECTION SYSTEM XBIS | P-Draft |
| 194 | LITD/27/24904 | Internet of Things IoT - Interoperability for IoT systems - Part 1: Framework | Under Published |
| 195 | LITD/27/24905 | Internet of Things IoT - Interoperability for IoT systems - Part 2: Transport interoperability | Under Published |
| 196 | LITD/27/24906 | Internet of Things IoT - Interoperability for IoT systems - Part 3: Semantic interoperability | Under Published |
| 197 | LITD/27/24907 | Internet of Things IoT - Interoperability for IoT systems - Part 4: Syntactic interoperability | Under Published |
| 198 | LITD/28/21729 | Smart Cities - GIS Part 2 Self-Assessment of GIS Reference Architecture | WC-Draft |
| 199 | LITD/28/22596 | Municipal Governance Part 8: Building Plan Approval Section 1: Taxonomy | WC-Draft |
| 200 | LITD/28/22599 | Municipal Governance Part 7: Water and Sewerage Section 1: Taxonomy | WC-Draft |
| 201 | LITD/28/22601 | Municipal Governance Part 6: Trade License Section 1: Taxonomy | WC-Draft |
| 202 | LITD/28/22602 | Municipal Governance Part 4: Fire No Objection Certificate NoC Section 1: Taxonomy | F-Draft |
| 203 | LITD/28/22606 | Municipal Governance Part 5: Municipal Grievance Redressal Section 1: Taxonomy | F-Draft |
| 204 | LITD/28/24026 | Unified Data Exchange Part 4: Compliance Specifications Section 1: Catalogue Service | WC-Draft |
| 205 | LITD/30/18790 | Information technology Artificial intelligence AI Bias in AI systems and AI aided decision making | F-Draft |
| 206 | LITD/30/22592 | Information technology Artificial intelligence Guidance on risk management | Under Published |
| 207 | LITD/30/24566 | Information Technology - Artificial Intelligence- Management System | Under Published |
| 208 | LITD/30/24862 | Artificial Intelligence -Functional Safety and AI Systems | Under Published |
| 209 | LITD/30/24865 | Information Technology -Artificial Intelligence- Guidance for AI Applications | Under Published |
| 210 | LITD/30/24866 | Information Technology- Artificial Intelligence- AI System Life Cycle Processes | Under Published |
| 211 | LITD/30/24867 | Systems and Software Engineering- Systems and Software Quality Requirements and Evaluation SQuaRE -Guidance for Quality Evaluation of Artificial Intelligence AI Systems | Under Published |
| 212 | LITD/32/22485 | Information Technology Vocabulary Part 37: Biometrics | WC-Draft |
| 213 | LITD/32/22486 | Information Technology Biometric Performance Testing and Reporting Part 1: Principles and Framework | WC-Draft |
| 214 | LITD/32/22487 | Information Technology Cross-Jurisdictional and Societal Aspects of Implementation of Biometric Technologies Pictograms Icons and Symbols for use With Biometric Systems Part 1: General Principles | WC-Draft |
| 215 | LITD/32/22488 | Information Technology Cross-Jurisdictional and Societal Aspects of Implementation of Biometric Technologies Pictograms Icons and Symbols for use With Biometric Systems Part 4: Fingerprint Applications | WC-Draft |
| 216 | LITD/32/22489 | Information Technology Cross-Jurisdictional and Societal Aspects of Implementation of Biometric Technologies Pictograms Icons and Symbols for use With Biometric Systems Part 9: Vascular Applications | WC-Draft |
| 217 | LITD/33/24124 | Wearable Electronic Devices and Technologies Part 101: Section1: Terminology | F-Draft |
| 218 | LITD/33/24125 | Wearable Electronic Devices and Technologies Part 201: Electronic Textile Section 1: Measurement Methods for Basic Properties of Conductive Yarns | WC-Draft |
| 219 | LITD/33/24126 | Wearable electronic devices and technologies Part 201-2: Electronic textile Section 2: Measurement methods for basic properties of conductive fabrics and insulation materials | WC-Draft |
| 220 | LITD/33/24127 | Wearable electronic devices and technologies Part 201 Electronic textile Section 3:Determination of electrical resistance of conductive textiles under simulated microclimate | Under Published |
| 221 | LITD/33/24128 | Wearable electronic devices and technologies Part 204 Electronic textile Section 1: Test method for assessing washing durability of E-textile products | Under Published |
| 222 | LITD/33/24129 | Wearable electronic devices and technologies Part 250 Electronic textile Section 1: Snap fastener connectors between e-textiles and detachable electronic devices | Under Published |
| 223 | LITD/33/24130 | Wearable electronic devices and technologies Part 801: Smart body area network SmartBAN Section 2: Low complexity medium access control MAC for SmartBAN | F-Draft |
| 224 | LITD/33/24132 | Wearable electronic devices and technologies Part 801: Smart body area network SmartBAN Section 1: Enhanced ultra-low power physical layer | F-Draft |
| 225 | LITD/33/24133 | Wearable electronic devices and technologies Part 406: Test method for measuring surface temperature of wrist- Section 1: worn wearable electronic devices while in contact with human skin | F-Draft |
| 226 | LITD/33/24135 | Wearable electronic devices and technologies Part 402 : Performance measurement of fitness wearables Section 1: Test methods of glove-type motion sensors for measuring finger movements | F-Draft |
| 227 | LITD/33/24136 | Wearable electronic devices and technologies Part 401: Devices and systems: functional elements Section 1: Evaluation method of the stretchable resistive strain sensor | F-Draft |
| 228 | LITD/36/20538 | ELECTROTECHNICAL VOCABULARY: PART 59 EDUCATIONAL OR TRAINING EQUIPMENT AND SYSTEMS First Revision | Finalization |
| 229 | LITD/36/20589 | Information Technology - 130 mm Rewritable Optical Disk Cartridge for Information Interchange | WC-Draft |
| 230 | LITD/36/20616 | Information Processing - Magnetic Tape Cassette and Cartridge Labelling and File Structure for Information Interchange | Finalization |
| 231 | LITD/36/20617 | Information Processing - Volume and File Structure Of CD - ROM for Information Interchange | WC-Draft |
| 232 | LITD/36/20619 | File Structure and Labelling of Flexible Disk Cartridges for Information Interchange | WC-Draft |