| S. No. |
Doc. NO. | Document Title | Stage |
|---|---|---|---|
| 1 | MHD/01/21040 | Surgical Instrument - Scalpel | WC-Draft |
| 2 | MHD/01/21041 | Skin grafting blade | Under Published |
| 3 | MHD/01/22077 | Autopsy Instruments - Brain Knife | Under Published |
| 4 | MHD/01/22078 | Autopsy Instruments - Chisel | Under Published |
| 5 | MHD/01/22284 | Plastic Surgery Instruments - Kilner Scissors | Under Published |
| 6 | MHD/01/22318 | Autopsy Instruments - Amputation Knife | Under Published |
| 7 | MHD/01/24072 | Autopsy Instruments - Cartilage Knife | Under Published |
| 8 | MHD/01/24170 | Autopsy Instruments - Knife | Under Published |
| 9 | MHD/01/24248 | Autopsy Instruments - Bowel Scissors | Under Published |
| 10 | MHD/01/24258 | Plastic Surgery Instruments - McIndoe Scissors | Finalization |
| 11 | MHD/01/25219 | Laparoscopic devices - Hand held instruments | Project-Approval |
| 12 | MHD/01/25220 | Surgical Stapler | Project-Approval |
| 13 | MHD/01/25221 | Compression Therapy Devices | Project-Approval |
| 14 | MHD/01/25222 | Optics and photonics Medical endoscopes and endotherapy devices Part 5: Determination of optical resolution of rigid endoscopes with optics | WC-Draft |
| 15 | MHD/01/25232 | Medical endoscopes and endotherapy devices Part 6 Vocabulary | WC-Draft |
| 16 | MHD/01/25233 | Medical endoscopes and endotherapy devices Part 8: Particular requirements for capsule endoscopes | WC-Draft |
| 17 | MHD/01/25736 | Plastic Surgery Instruments - Craniofacial - Cleft Palate Raspatory (First Revision) | WC-Draft |
| 18 | MHD/02/19659 | Lane’s Pattern Orthopaedic Gouge Forceps – Specification (First Revision) | Under Published |
| 19 | MHD/02/20867 | Lower Femoral Blade Plate - Specification (First Revision) | Under Published |
| 20 | MHD/02/21063 | Lowman Type Bone Clamp - Specification (First Revision) | F-Draft |
| 21 | MHD/02/21064 | Orthopaedic Epiphyseal Staple - Specification (First Revision) | Under Published |
| 22 | MHD/02/21077 | Scissors Bandage Listers Pattern - Specification (First Revision) | Under Published |
| 23 | MHD/02/21085 | Bohler’s Stirrup – Specification (First Revision) | Under Published |
| 24 | MHD/02/21087 | Stille Pattern Orthopaedic Chisels — Specification (First Revision) | F-Draft |
| 25 | MHD/02/21088 | Stille Pattern Orthopaedic Osteotomes - Specification (First Revision) | F-Draft |
| 26 | MHD/02/22677 | Plastic Cervical Collar – Specification (First Revision) | F-Draft |
| 27 | MHD/02/22703 | Farabeuf Pattern Bone Holding Forceps – Specification (First Revision) | F-Draft |
| 28 | MHD/02/22704 | Nylon-Headed Orthopaedic Mallet Specification First Revision | F-Draft |
| 29 | MHD/02/22705 | Gigli Saw Handle – Specification (First Revision) | F-Draft |
| 30 | MHD/02/23696 | Implants for Surgery — Metallic materials Part 9: Wrought High Nitrogen Stainless Steel First Revision | Under Published |
| 31 | MHD/02/23712 | Implants for surgery Ceramic materials Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement (First Revision) | Under Published |
| 32 | MHD/02/23713 | Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants First Revision | Under Published |
| 33 | MHD/02/24239 | Implants for Surgery - Ultra-high-molecular-weight Polyethylene Part 3 Accelerated Ageing Methods | Under Published |
| 34 | MHD/02/24241 | Implants for Surgery - Ultra-high-molecular-weight Polyethylene Part 5: Morphology Assessment Method | Under Published |
| 35 | MHD/02/24243 | Implants for Surgery - Partial and Total Hip Joint Prostheses Part 12: Deformation Test Method for Acetabular Shells | Under Published |
| 36 | MHD/02/25841 | Implants for surgery Components for partial and total knee joint prostheses Part 2: Articulating surfaces made of metal ceramic and plastics materials | WC-Draft |
| 37 | MHD/02/25842 | Implants for Surgery Ceramic Materials Part 1: Ceramic Materials Based on High Purity Alumina First Revision | WC-Draft |
| 38 | MHD/02/25843 | Implants for surgery Coatings on metallic surgical implants Part 1: Plasma-sprayed coatings derived from titanium or titanium 6 aluminum-4 vanadium alloy powders First Revision | WC-Draft |
| 39 | MHD/02/25874 | Implants for Surgery Metallic Materials Unalloyed Tantalum for Surgical Implant Applications First Revision | WC-Draft |
| 40 | MHD/02/25875 | Non-Active Surgical Implants Joint Replacement Implants Specific Requirements for Knee-Joint Replacement Implants First Revision | WC-Draft |
| 41 | MHD/02/25876 | Non-active surgical implants Joint replacement implants Specific requirements for hip-joint Replacement implants First Revision | WC-Draft |
| 42 | MHD/02/25893 | Implants for Surgery Wear of Total Hip-Joint Prostheses Part 1: Loading and Displacement Parameters for Wear-Testing Machines and Corresponding Environmental Conditions for Test | WC-Draft |
| 43 | MHD/02/25894 | Implants for Surgery Wear of Total Hip-Joint Prostheses Part 2: Methods of Measurement | WC-Draft |
| 44 | MHD/02/25895 | Implants for Surgery Wear of Total Hip-Joint Prostheses Part 3: Loading and Displacement Parameters for Orbital Bearing Type Wear Testing Machines and Corresponding Environmental Conditions for Test | WC-Draft |
| 45 | MHD/02/25896 | Implants for surgery Wear of total hip-joint prostheses Part 4: Testing hip prostheses under variations in component positioning which results in direct edge loading | WC-Draft |
| 46 | MHD/02/25897 | Implants for Surgery Wear of Total Knee Prostheses Part 5: Durability Performance of the Patellofemoral Joint | WC-Draft |
| 47 | MHD/02/25918 | Non-Active Surgical Implants Mammary Implants Particular Requirements | WC-Draft |
| 48 | MHD/02/25919 | Instruments for Use in Association with Non-Active Surgical Implants General Requirements | WC-Draft |
| 49 | MHD/02/25920 | Implants for surgery Test methods of material for use as a cortical bone model | WC-Draft |
| 50 | MHD/02/25940 | Implants for surgery General guidelines and requirements for assessment of absorbable metallic implants | Project-Approval |
| 51 | MHD/02/25941 | Implants for surgery General guidelines and requirements for assessment of absorbable metallic implants | Project-Approval |
| 52 | MHD/02/25942 | Implants for surgery General guidelines and requirements for assessment of absorbable metallic implants | Project-Approval |
| 53 | MHD/02/25943 | Implants for surgery Specification and verification of synthetic anatomical bone models for testing | Project-Approval |
| 54 | MHD/02/25944 | Implants for surgery Two-part addition-cure silicone elastomers | Project-Approval |
| 55 | MHD/02/25945 | Implants for surgery Requirements for production of forgings | Project-Approval |
| 56 | MHD/02/25946 | Implants for Surgery Roentgen Stereo Photogrammetric Analysis for the Assessment of Migration of Orthopaedic Implants | Project-Approval |
| 57 | MHD/02/25947 | Wear of Implant Materials Polymer and Metal Wear Particles Isolation and Characterization | Project-Approval |
| 58 | MHD/02/25948 | Implants for Surgery Orthopaedic Joint Prosthesis Part 1: Procedure for Producing Parametric 3D Bone Models from CT Data of the Knee | Project-Approval |
| 59 | MHD/02/25949 | Implants for Surgery Wear of Total Ankle-Joint Prostheses Loading and Displacement Parameters for Wear-Testing Machines with Load or Displacement Control and Corresponding Environmental Conditions for Test | Project-Approval |
| 60 | MHD/02/26001 | Implants for surgery Test solutions and environmental conditions for static and dynamic corrosion tests on implantable materials and medical devices | Project-Approval |
| 61 | MHD/02/26002 | Implants for surgery Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods | Project-Approval |
| 62 | MHD/02/26003 | Implants for Surgery Mechanical Testing of Implantable Spinal Devices Fatigue Test Method for Spinal Implant Assemblies Using an Anterior Support | Project-Approval |
| 63 | MHD/03/20943 | MTP Suction Apparatus Specification Part 3 Electrically Operated Third Revision | Under Published |
| 64 | MHD/03/23554 | Copper-bearing Contraceptive Intrauterine Devices Requirements and Tests Second Revision | Under Published |
| 65 | MHD/03/25156 | Uterine Sound - Specification (second revision) | WC-Draft |
| 66 | MHD/03/25157 | Anterior Vaginal Wall Retractor Sims Pattern Specification first revision | WC-Draft |
| 67 | MHD/03/25158 | Vaginal Speculum Cuscos Pattern Specification first revision | WC-Draft |
| 68 | MHD/03/25159 | Suction Type Uterine Curette Specification first revision | WC-Draft |
| 69 | MHD/03/25160 | Mucus Sucker Specification First revision | WC-Draft |
| 70 | MHD/03/25271 | SIMS PATTERN DOUBLE-ENDED SHARP UTERINE CURETTE SPECIFICATION First Revision | WC-Draft |
| 71 | MHD/03/25272 | Cannula Intra-Uterine Hysterosalpingography Specification First Revision | WC-Draft |
| 72 | MHD/03/25273 | Laproscopic Trocar And Cannula Specification First Revision | WC-Draft |
| 73 | MHD/03/25274 | MTP Suction Apparatus Specification Part 1 Manually Operated Third Revision | WC-Draft |
| 74 | MHD/03/25275 | MTP Suction Apparatus Specification Part 2 Electrical-Cum-Manually Operated Second Revision | WC-Draft |
| 75 | MHD/03/26025 | Sims Pattern Double-ended Vaginal Speculum Specification First Revision of IS 6112 | WC-Draft |
| 76 | MHD/03/26026 | Gynaecological Instruments Forceps Uterine Vulsellum Shape and Dimensions Second Revision of IS 6114 | WC-Draft |
| 77 | MHD/03/26027 | Gynaecological Instruments Forceps Uterine Tenaculum Shape and Dimensions Second Revision of IS 6112 | WC-Draft |
| 78 | MHD/03/26028 | Sims Pattern Double-Ended Sharp and Blunt Uterine Curette Specification First Revision of IS 6505 | WC-Draft |
| 79 | MHD/03/26029 | Suction Type Endometrial Biopsy Curette Specification First Revision of IS 6510 | WC-Draft |
| 80 | MHD/03/26030 | Foetoscope For Foetal Heart Sounds Pinards Pattern Specification First Revision of IS 6565 | WC-Draft |
| 81 | MHD/03/26031 | Obstetrics Instruments Forceps Ovum Shape and Dimensions Second Revision of IS 6578 | WC-Draft |
| 82 | MHD/03/26032 | Single-ended Hegars Pattern Uterine Dilators Specification First Revision of IS 6584 | WC-Draft |
| 83 | MHD/03/26033 | Gynaecological Instruments Forceps Uterine Dressing Bozemanns Pattern Shape and Dimensions Second Revision of IS 6589 | WC-Draft |
| 84 | MHD/03/26034 | Curette Blunt Uterine Specification First Revision of IS 6957 | WC-Draft |
| 85 | MHD/04/19128 | Oesophagoscope (Negus Pattern) – Specification (First Revision) | WC-Draft |
| 86 | MHD/04/21279 | Fibrin Glue | WC-Draft |
| 87 | MHD/04/21280 | Grommet Specification | WC-Draft |
| 88 | MHD/04/21654 | Mallets for ENT Surgery (First Revision) | Finalization |
| 89 | MHD/04/21659 | PTFE Piston Cutting Jig(First Revision) | Finalization |
| 90 | MHD/04/21736 | Lempert’s Pattern Endaural Retractor — Specification (First Revision) | Finalization |
| 91 | MHD/04/21743 | ENT Diagnostic Instruments Part 1 Tuning Forks Section 1 Gardiner Brown’s Pattern | Finalization |
| 92 | MHD/04/21830 | PTFE Teflon Piston Depth Gauge Specification First Revision | Finalization |
| 93 | MHD/04/25256 | ENT Workstation | WC-Draft |
| 94 | MHD/04/25258 | Otology Drill | WC-Draft |
| 95 | MHD/04/25360 | Specification For Examination Lamp With Bulls Eye Condenser Floor Model | WC-Draft |
| 96 | MHD/04/25394 | ENT Surgery Instruments Forceps Tonsil Artery Birketts Pattern Specification | Finalization |
| 97 | MHD/04/25494 | Specification For retractor Light Model Weislanders Pattern | WC-Draft |
| 98 | MHD/04/25922 | Specification for Saws Nasal Josephs Pattern | WC-Draft |
| 99 | MHD/04/25923 | Specification for Forceps Redressing Walshams Right Left and Straightening | WC-Draft |
| 100 | MHD/04/25925 | Specification for Speculum Nasal Thudichums | WC-Draft |
| 101 | MHD/04/25927 | Specification for Curette Ballances Pattern | WC-Draft |
| 102 | MHD/04/25929 | Specification for Forceps Redressing ASCHs Pattern | WC-Draft |
| 103 | MHD/04/25933 | Specification for Trocar Antral With Cannula Tilley Lichtwitz Pattern | WC-Draft |
| 104 | MHD/04/25934 | Specification for Nasal Cartilage Knife Ballengers Pattern | WC-Draft |
| 105 | MHD/04/25938 | Specification For Depressor Tongue Lacks Pattern | WC-Draft |
| 106 | MHD/04/25979 | ENT Surgery Instruments Head Mirror-Specification | WC-Draft |
| 107 | MHD/04/25980 | Specification for Draffin Suspension Apparatus | WC-Draft |
| 108 | MHD/04/25984 | Specification for Tracheostomy Tubes and Guides Cubleys Pattern | WC-Draft |
| 109 | MHD/04/25987 | Ent Surgery Instruments -Tracheostomy Tubes Chevaliar Jack Sons Pattern-- Specification | WC-Draft |
| 110 | MHD/05/23847 | Ophthalmic implants Ocular endotamponades | Under Published |
| 111 | MHD/05/24176 | Ophthalmic implants Ophthalmic viscosurgical devices | Under Published |
| 112 | MHD/05/25186 | Ophthalmic optics and instruments Near reading charts | WC-Draft |
| 113 | MHD/05/25281 | Ophthalmic optics Mounted spectacle lenses | WC-Draft |
| 114 | MHD/05/25337 | Ophthalmic optics Spectacle lenses Vocabulary | WC-Draft |
| 115 | MHD/05/25340 | Ophthalmic optics Contact lenses and contact lens care products Labelling | WC-Draft |
| 116 | MHD/05/25343 | Ophthalmic optics Contact lenses and contact lens care products Fundamental requirements | WC-Draft |
| 117 | MHD/05/25356 | Ophthalmic instruments Direct ophthalmoscopes | WC-Draft |
| 118 | MHD/05/25357 | Ophthalmic instruments Indirect ophthalmoscopes | WC-Draft |
| 119 | MHD/05/25358 | Ophthalmic implants Intraocular lenses Part 3 Mechanical properties and test methods | WC-Draft |
| 120 | MHD/05/25359 | Ophthalmic implants Intraocular lenses Part 7 Clinical investigations of intraocular lenses for the correction of aphakia | WC-Draft |
| 121 | MHD/05/25458 | Ophthalmic optics Uncut finished spectacle lenses Part 3 Transmittance specifications and test methods | WC-Draft |
| 122 | MHD/05/25473 | Ophthalmic optics Visual acuity testing Standard and clinical optotypes and their presentation First Revision Amendment - 1 | WC-Draft |
| 123 | MHD/06/20912 | Thoracic Surgery Instruments - Auricle Clamps - Crafoords Pattern - Specification (Second Revision) | Under Published |
| 124 | MHD/06/20914 | Thoracic Surgery Instruments - Rib Shears, Tudor Edward’s pattern - Specification (Second Revision) | Under Published |
| 125 | MHD/06/20915 | Thoracic Surgery Instruments - Needle Holder - Specification (Second Revision) | Under Published |
| 126 | MHD/06/20916 | Thoracic Surgery Instruments Periosteotome Rib Alexanders Pattern Specification Second Revision | Under Published |
| 127 | MHD/06/20917 | Thoracic Surgery Instruments - Empyema Trocar, Nelson’s Pattern - Specification Second Revision | Under Published |
| 128 | MHD/06/20920 | Thoracic Surgery Instruments - Lung Forceps, Duval’s Pattern - Specification (Second Revision) | Under Published |
| 129 | MHD/06/20921 | Thoracic Surgery Instruments - Artery Forceps, Robert’s Pattern - Specification Second Revision | Under Published |
| 130 | MHD/06/20922 | Specification for Spreader Rib Tuffiers Pattern Adult Size Second Revision | Under Published |
| 131 | MHD/06/20927 | Thoracic Surgery Instruments - Scapula Retractor - Specification Second Revision | Under Published |
| 132 | MHD/06/20930 | Thoracic Surgery Instruments - Angled Scissors - Specification (Second Revision) | Under Published |
| 133 | MHD/06/20932 | Thoracic Surgery Instruments - Vascular Clamp - Specification (First Revision) | Under Published |
| 134 | MHD/06/20933 | Thoracic Surgery Instruments - Blunt End Scissors - Specification (First Revision) | Under Published |
| 135 | MHD/06/20934 | Thoracic Surgery Instruments - Multipurpose Clamps - Specification (First Revision) | Under Published |
| 136 | MHD/06/23653 | Cardiovascular Implants and Extracorporeal Systems — Vascular Device-Drug Combination Products Part 2 Local Regulatory Information ( First Revision ) | Under Published |
| 137 | MHD/06/24992 | Sizing parameters of surgical valve prostheses: Requirements regarding the application of ISO 5840-2 | WC-Draft |
| 138 | MHD/06/24999 | Cardiovascular implants and artificial organs Cannulae for extracorporeal circulation | WC-Draft |
| 139 | MHD/06/25000 | Cardiovascular implants Transcatheter cardiac occluders | WC-Draft |
| 140 | MHD/06/25002 | Implants for surgery Active implantable medical devices Part 4: Implantable infusion pump systems | WC-Draft |
| 141 | MHD/07/20220 | Self- Retaining Retractor For Laminectomy | Under Published |
| 142 | MHD/07/20221 | Brain Spatula—Olivecrona’s Pattern (First Revision) | Under Published |
| 143 | MHD/07/20223 | Cushing’s Pattern Toothed and Bayonet Shaped Dissecting Forceps( First Revision ) | Under Published |
| 144 | MHD/07/20236 | Self-Retaining Retractor for Neurosurgery | Under Published |
| 145 | MHD/07/21710 | Neurosurgical Implants Part 1 Self Closing Intracranial Aneurysm Clips (Second Revision) | Under Published |
| 146 | MHD/07/25834 | Neurosurgical Instruments- Forceps Artery Dandys Pattern-Shape and Dimensions | WC-Draft |
| 147 | MHD/07/25835 | Neurosurgical Instruments -Forceps Artery Straight and Curved on Flat Hugh Cairns Pattern - Shape and Dimensions | WC-Draft |
| 148 | MHD/07/25836 | Neurosurgical Instruments - Needle Holder - Shape and Dimensions | WC-Draft |
| 149 | MHD/07/25864 | Specification For Rongeur Cranial Dahlgrens Pattern | WC-Draft |
| 150 | MHD/07/25865 | Specification For Forceps Dressing Bayonet Shape Gushings Pattern | WC-Draft |
| 151 | MHD/07/25866 | Specification For Guide Saw De Martels Pattern | WC-Draft |
| 152 | MHD/07/25867 | Specification For Cannula Brain | WC-Draft |
| 153 | MHD/07/25977 | Neurosurgical Implants Self Closing Intracranial Aneurysm Clips | WC-Draft |
| 154 | MHD/08/19060 | Dentistry — Nomenclature of oral anomalies Part 1 Code for the representation of oral anomalies | Under Published |
| 155 | MHD/08/19066 | Dentistry — Central suction source equipment | Under Published |
| 156 | MHD/08/19069 | Dentistry — Digitizing Devices for CAD/CAM Systems for Indirect Dental Restorations — Test Methods for Assessing Accuracy | Under Published |
| 157 | MHD/08/19070 | Dentistry — Interoperability of CAD/CAM systems | Under Published |
| 158 | MHD/08/19979 | Dentistry — Dental rubber dam instruments Part 2 Clamp forceps | Under Published |
| 159 | MHD/08/20630 | Cutting Type Dental Instruments — General Requirements (Second Revision) | Under Published |
| 160 | MHD/08/20634 | Dental Cutting Spoons (First Revision) | Under Published |
| 161 | MHD/08/20639 | Dental Flasks (First Revision) | Under Published |
| 162 | MHD/08/20640 | Dental Sticky Wax (First Revision) | Under Published |
| 163 | MHD/08/20641 | Acrylizer (Curing Unit ) (First Revision) | Under Published |
| 164 | MHD/08/24074 | Dentistry — Number coding system for rotary instruments Part 3 Specific characteristics of burs and cutters | Under Published |
| 165 | MHD/08/24076 | Dentistry — Number coding system for rotary instruments Part 7 Specific characteristics of mandrels and special instruments | Under Published |
| 166 | MHD/08/24077 | Dentistry — Diamond rotary instruments Part 1 General requirements | Under Published |
| 167 | MHD/08/24078 | Dentistry — Sterile injection needles for single use | Under Published |
| 168 | MHD/08/24079 | Dentistry — Single-use cartridges for local anaesthetics | Under Published |
| 169 | MHD/08/24082 | Dentistry — Torsion test of implant body/connecting part joints of endosseous dental implant systems | Under Published |
| 170 | MHD/08/24086 | Dental Elevators Part 6 Flohr Elevators | Under Published |
| 171 | MHD/08/24087 | Dentistry — Minimal dental implant data set for clinical use | Under Published |
| 172 | MHD/08/24088 | Dentistry — Torque transmitter for handpieces | Under Published |
| 173 | MHD/08/24091 | Dentistry — Analysis of fluoride concentration in aqueous solutions by use of fluoride ion-selective electrode | Under Published |
| 174 | MHD/08/24092 | Dentistry — Reprocessable cartridge syringes for intraligamentary injections | Under Published |
| 175 | MHD/08/24093 | Dentistry — Materials for Dental Instruments Part 1 Stainless Steel | Under Published |
| 176 | MHD/08/24094 | Dentistry — Manual toothbrushes — Resistance of tufted portion to deflection | Under Published |
| 177 | MHD/08/24095 | Dentistry — Multifunction handpieces | Under Published |
| 178 | MHD/08/24096 | Dentistry — Spoons and bone curettes | Under Published |
| 179 | MHD/08/24097 | Dentistry — Vocabulary of process chain from dental CT to CAD/CAM for implant prosthetic restorations — Backward planning in the digital process chain | Under Published |
| 180 | MHD/08/24098 | Dentistry — Tissue punches | Under Published |
| 181 | MHD/08/24099 | Dentistry — Intraoral camera | Under Published |
| 182 | MHD/08/24100 | Dentistry — Excavators | Under Published |
| 183 | MHD/08/24101 | Dentistry — Zinc oxide-eugenol cements and non-eugenol zinc oxide cements | Under Published |
| 184 | MHD/08/24102 | Dentistry — Endodontic instruments Part 2 Enlargers | Under Published |
| 185 | MHD/08/24103 | Dentistry — Mobile dental units and dental patient chairs Part 1 General requirements | Under Published |
| 186 | MHD/08/24104 | Dentistry — Mobile dental units and dental patient chairs Part 2 Air, water, suction and wastewater systems | Under Published |
| 187 | MHD/08/24112 | Dentistry — Stationary dental units and dental patient chairs Part 2 Air, water, suction and wastewater systems | Under Published |
| 188 | MHD/08/24113 | Dentistry — Test methods for rotary instruments (Second Revision) | Under Published |
| 189 | MHD/08/24114 | Dentistry — Brazing materials | Under Published |
| 190 | MHD/08/24115 | Dentistry — Elastomeric auxiliaries for use in orthodontics | Under Published |
| 191 | MHD/08/24116 | Dentistry — Metallic materials for fixed and removable restorations and appliances (First Revision) | F-Draft |
| 192 | MHD/08/24117 | Dentistry — Chairside denture base relining materials Part 1 Hard type materials | Under Published |
| 193 | MHD/08/25038 | Dentistry — Endodontic Instruments Part 4 Auxiliary Instruments | Under Published |
| 194 | MHD/08/25039 | Dentistry — Endodontic Instruments Part 6 Numeric Coding System | Under Published |
| 195 | MHD/08/25040 | Dentistry — Test Methods for Tensile Bond Strength to Tooth Structure | Under Published |
| 196 | MHD/08/25041 | Dentistry — Number Coding System for Rotary Instruments Part 4 Specific Characteristics of Diamond Instruments | Under Published |
| 197 | MHD/08/25042 | Dentistry — Ceramic Materials | Under Published |
| 198 | MHD/08/25043 | Dentistry — Endodontic Absorbent Points | Under Published |
| 199 | MHD/08/25044 | Dentistry — Rotary Diamond Instruments Part 2 Discs | Under Published |
| 200 | MHD/08/25045 | Dentistry — Dentifrices — Requirements, Test Methods and Marking | Under Published |
| 201 | MHD/08/25046 | Dentistry — Oral Care Products — Oral Rinses | Under Published |
| 202 | MHD/08/25047 | Dentistry — Corrosion Test Methods for Dental Amalgam | WC-Draft |
| 203 | MHD/08/25048 | Dentistry — Machinable Ceramic Blanks | Under Published |
| 204 | MHD/08/25049 | Dentistry — Determination of the Strength of Dental Amalgam by the Hertzian Indentation Strength (HIT) Method | WC-Draft |
| 205 | MHD/08/25050 | Dentistry — Artificial Teeth for Dental Prostheses | Under Published |
| 206 | MHD/08/25654 | Dentistry — Evaluation of Antibacterial Activity of Dental Restorative Materials, Luting Materials, Fissure Sealants and Orthodontic Bonding or Luting Materials | WC-Draft |
| 207 | MHD/08/25655 | Dentistry — General Requirements of Hand Instruments Part 1 Non-Hinged Hand Instruments | WC-Draft |
| 208 | MHD/08/25656 | Dentistry — Polymer-Based Composite Machinable Blanks | WC-Draft |
| 209 | MHD/08/25657 | Dentistry — Designation System for Tooth Developmental Stages | WC-Draft |
| 210 | MHD/08/25658 | Dentistry — Laboratory Cutters Part 1 Steel Laboratory Cutters | WC-Draft |
| 211 | MHD/08/25659 | Dentistry — Laboratory Cutters Part 2 Carbide laboratory cutters | WC-Draft |
| 212 | MHD/08/25660 | Dentistry — Laboratory Cutters Part 3 Carbide Cutters for Milling Machines | WC-Draft |
| 213 | MHD/08/25661 | Dental Rotary Instruments — Cutters Part 4 Miniature Carbide Laboratory Cutters | WC-Draft |
| 214 | MHD/08/25662 | Dentistry — Extraction Forceps Part 1 General Requirements | WC-Draft |
| 215 | MHD/08/25663 | Dentistry — Extraction Forceps Part 2 Designation | WC-Draft |
| 216 | MHD/08/25664 | Dentistry — Extraction Forceps Part 3 Design | WC-Draft |
| 217 | MHD/08/25665 | Dentistry — Corrosion Test Methods for Metallic Materials | WC-Draft |
| 218 | MHD/08/25666 | Dentistry — Designation System for Supernumerary Teeth | WC-Draft |
| 219 | MHD/08/25667 | Dentistry — Magnetic Attachments | WC-Draft |
| 220 | MHD/08/25668 | Dentistry — Manual Toothbrushes — General Requirements and Test Methods | WC-Draft |
| 221 | MHD/08/25669 | Dentistry — Trephine Burs | WC-Draft |
| 222 | MHD/08/25670 | Dentistry — Powder Jet Handpieces and Powders | WC-Draft |
| 223 | MHD/08/25671 | Dentistry — Colour Tabs for Intraoral Tooth Colour Determination | WC-Draft |
| 224 | MHD/08/25672 | Dentistry — Rotational Adaptability Test Between Implant Body and Implant Abutment in Dental Implant Systems | WC-Draft |
| 225 | MHD/08/25673 | Dentistry — Test Methods for Machining Accuracy of Computer-Aided Milling Machines | WC-Draft |
| 226 | MHD/08/25674 | Dentistry — Classification of Tooth Restorations Preparation | WC-Draft |
| 227 | MHD/08/25675 | Dentistry — External Tooth Bleaching Products | WC-Draft |
| 228 | MHD/10/21498 | Medical Laboratory Glass Apparatus-Haemocytometer-Specification First Revision | Under Published |
| 229 | MHD/10/22499 | Medical Laboratory Glassware Bacteriological Bottles Specification first revision | Under Published |
| 230 | MHD/10/25168 | Medical Laboratory Glassware Ostwald-Folin Type Pipettes Specification First Revision | Project-Approval |
| 231 | MHD/10/25169 | Medical Laboratory Glassware Roux Bacteriological Flask - Specification First Revision | Project-Approval |
| 232 | MHD/10/25170 | Medical Laboratory Glassware Bijou bacteriological bottle - Specification First Revision | Project-Approval |
| 233 | MHD/10/25171 | Medical Laboratory Glassware Culture tube with screw cap - Specification First Revision | Project-Approval |
| 234 | MHD/10/25172 | Medical Laboratory Glassware Anaerobic jar - Specification First Revision | Project-Approval |
| 235 | MHD/10/25173 | Medical Laboratory Glassware Haemometer Tube Specification First Revision | Project-Approval |
| 236 | MHD/10/25174 | Medical Laboratory Glassware Thin walled glass capillary pipettes - Specification First Revision | Project-Approval |
| 237 | MHD/10/25175 | Medical Laboratory Instrument - Liquid based cytology kit | Project-Approval |
| 238 | MHD/10/25176 | Medical Laboratory Instrument - Filter tips for standard pipettes | Project-Approval |
| 239 | MHD/10/25177 | Medical Laboratory Instrument - Grdient Themocyclers - General Requirements | Project-Approval |
| 240 | MHD/10/25178 | Medical Laboratory Instrument - Platelet Incubator with Agitator- General Requirements | Project-Approval |
| 241 | MHD/10/25179 | Medical Laboratory Instrument - Anearobic Workstation - General Requirements | Project-Approval |
| 242 | MHD/12/17339 | Transfusion equipment for medical use Part 5 Transfusion sets for single use with pressure infusion apparatus | Under Published |
| 243 | MHD/12/18073 | Sterilizer — Portable, Vertical, Pressure Type — Specification (First Revision) | Under Published |
| 244 | MHD/12/19187 | Sterile single-use intravascular introducers, dilators and guidewire | Under Published |
| 245 | MHD/12/19717 | Blood Donor Couch Specification | WC-Draft |
| 246 | MHD/12/19718 | Dialysis Chair | Finalization |
| 247 | MHD/12/20820 | Sterile hypodermic syringes for single use Part 2 Syringes for use with power-driven syringe pumps | Under Published |
| 248 | MHD/12/20832 | Processing of health care products — Information to be provided by the medical device manufacturer for the processing of medical devices Part 2 Non-critical medical devices | Under Published |
| 249 | MHD/12/20835 | Processing of health care products — Information to be provided by the medical device manufacturer for the processing of medical devices Part 1 Critical and semi-critical medical devices | Under Published |
| 250 | MHD/12/22897 | Filter and Filter Chamber for Blood Transfusion- Specification (First Revision) | Finalization |
| 251 | MHD/12/23337 | Single-use Sterile Rubber Surgical Gloves — Specification | Under Published |
| 252 | MHD/12/23591 | In vitro diagnostic medical devices Single-use containers for the collection of specimens from humans other than blood | Under Published |
| 253 | MHD/12/23650 | Injection Containers and Accessories Part 5 Freeze Drying Closures for Injection Vials | Under Published |
| 254 | MHD/12/23652 | Injection Containers and Accessories Part 6 Caps Made of Aluminium-Plastics Combinations for Injection Vials | Under Published |
| 255 | MHD/12/23655 | Plastic Containers for Intravenous Injections | Under Published |
| 256 | MHD/12/23900 | Guidance for assessment and evaluation of changes to drug delivery systems | Under Published |
| 257 | MHD/12/23985 | Sterilization of health care products — Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives — Requirements for characterization, development, validation and routine control of a sterilization process for medical devices | Under Published |
| 258 | MHD/12/23986 | Sterilization of Health Care Products — Chemical Indicators Part 6 Type 2 Indicators and Process Challenge Devices for Use in Performance Testing of Small Steam Sterilizers | Under Published |
| 259 | MHD/12/23990 | Guidance on quality of water for sterilizers, sterilization and washer-disinfectors for health care products | Under Published |
| 260 | MHD/12/24229 | Walk-in Cooler — Specification (Temperature Range of 2°C to 8°C) | Under Published |
| 261 | MHD/12/24230 | Specification for refrigerator or combined refrigerator and water pack freezer intermittent mains powered - compression cycle- general requirement and test method | WC-Draft |
| 262 | MHD/12/24231 | Specification for Vaccine carrier - General requirements and test method | WC-Draft |
| 263 | MHD/12/25421 | Infusion Equipment for Medical Use Part 2 Closures for Infusion Bottles | WC-Draft |
| 264 | MHD/12/25422 | Infusion Equipment for Medical Use Part 3 Aluminium Caps for Infusion Bottles | WC-Draft |
| 265 | MHD/12/25423 | Infusion Equipment for Medical Use Part 5 Burette Infusion Sets for Single Use, Gravity Feed | WC-Draft |
| 266 | MHD/12/25424 | Infusion Equipment for Medical Use Part 6 Freeze Drying Closures for Infusion Bottles | WC-Draft |
| 267 | MHD/12/25425 | Infusion Equipment for Medical Use Part 7 Caps Made of Aluminium-Plastics Combinations for Infusion Bottles | WC-Draft |
| 268 | MHD/12/25426 | Infusion equipment for medical use Part 8 Infusion sets for single use with pressure infusion apparatus | WC-Draft |
| 269 | MHD/12/25428 | Infusion Equipment for Medical Use Part 9 Fluid Lines for Single Use with Pressure Infusion Equipment | WC-Draft |
| 270 | MHD/12/25429 | Infusion Equipment for Medical Use Part 10 Accessories for Fluid Lines for Single Use with Pressure Infusion Equipment | WC-Draft |
| 271 | MHD/12/25430 | Infusion Equipment for Medical Use Part 11 Infusion Filters for Single Use with Pressure Infusion Equipment | WC-Draft |
| 272 | MHD/12/25431 | Infusion Equipment for Medical Use Part 12 Check Valves for Single Use | WC-Draft |
| 273 | MHD/12/25432 | Infusion Equipment for Medical Use Part 13 Graduated Flow Regulators for Single Use with Fluid Contact | WC-Draft |
| 274 | MHD/12/25433 | Infusion Equipment for Medical Use Part 14 Clamps and Flow Regulators for Transfusion and Infusion Equipment without Fluid Contact | WC-Draft |
| 275 | MHD/12/25434 | Infusion Equipment for Medical Use Part 15 Light-Protective Infusion Sets for Single Use | WC-Draft |
| 276 | MHD/12/25435 | Aseptic Processing of Health Care Products Part 3 Lyophilization | WC-Draft |
| 277 | MHD/12/25436 | Aseptic Processing of Health Care Products Part 4 Clean-in-Place Technologies | WC-Draft |
| 278 | MHD/12/25437 | Aseptic Processing of Health Care Products Part 5 Sterilization in Place | WC-Draft |
| 279 | MHD/12/25439 | Aseptic Processing of Health Care Products Part 6 Isolator Systems | WC-Draft |
| 280 | MHD/12/25440 | Aseptic Processing of Health Care Products Part 7 Alternative Processes for Medical Devices and Combination Products | WC-Draft |
| 281 | MHD/12/25441 | Hypodermic Needles for Single Use — Colour Coding for Identification (First Revision) | WC-Draft |
| 282 | MHD/12/25443 | Medical Devices — Transfusion Set and Blood Bag Compatibility Test Method | WC-Draft |
| 283 | MHD/12/25444 | Sterile Packaged Ready for Filling Glass Cartridges | WC-Draft |
| 284 | MHD/12/25445 | Medical Devices — Non-Electrically Driven Portable Infusion Devices | WC-Draft |
| 285 | MHD/12/25446 | Sterilization of Health Care Products — Microbiological Methods Part 3 Bacterial Endotoxin Testing | WC-Draft |
| 286 | MHD/12/25448 | Stainless Steel Needle Tubing for the Manufacture of Medical Devices — Requirements and Test Methods | WC-Draft |
| 287 | MHD/12/25449 | Intravascular Catheters — Sterile and Single-Use Catheters Part 1 General Requirements (Second Revision) | WC-Draft |
| 288 | MHD/12/25583 | Intravascular Catheters — Sterile and Single-Use Catheters Part 4 Balloon Dilatation Catheters (Second Revision) | WC-Draft |
| 289 | MHD/12/25584 | Intravascular Catheters — Sterile and Single-Use Catheters Part 7 Peripherally Inserted Central Catheters | WC-Draft |
| 290 | MHD/12/25585 | Sterilization of Health Care Products — Radiation — Substantiation of Selected Sterilization Dose: Method VDmaxSD | WC-Draft |
| 291 | MHD/12/25586 | Sterilization of Health Care Products — Moist Heat — Requirements for the Development, Validation and Routine Control of a Sterilization Process for Medical Devices | WC-Draft |
| 292 | MHD/12/25589 | Sterile Hypodermic Syringes for Single Use Part 4 Syringes with Re-use Prevention Feature | WC-Draft |
| 293 | MHD/12/25590 | Needle-Based Injection Systems for Medical Use — Requirements and Test Methods Part 2 Double-Ended Pen Needles | WC-Draft |
| 294 | MHD/12/25953 | Injection Containers and Accessories Part 4 Closures for Injection Vials (First Revision) | Project-Approval |
| 295 | MHD/12/25954 | Aseptic Processing of Health Care Products Part 1 General Requirements (First Revision) | Project-Approval |
| 296 | MHD/12/25955 | Small-Bore Connectors for Liquids and Gases in Healthcare Applications Part 7 Connectors for Intravascular or Hypodermic Applications (First Revision) | Project-Approval |
| 297 | MHD/12/25956 | Elastomeric Parts for Parenterals and for Devices for Pharmaceutical Use Part 1 Extractables in Aqueous Autoclavates | Project-Approval |
| 298 | MHD/12/25958 | Elastomeric Parts for Parenterals and for Devices for Pharmaceutical Use Part 2 Identification and Characterization | Project-Approval |
| 299 | MHD/12/25959 | Elastomeric Parts for Parenterals and for Devices for Pharmaceutical Use Part 3 Determination of Released-Particle Count | Project-Approval |
| 300 | MHD/12/25960 | Elastomeric Parts for Parenterals and for Devices for Pharmaceutical Use Part 4 Biological Requirements and Test Methods | Project-Approval |
| 301 | MHD/12/25961 | Elastomeric Parts for Parenterals and for Devices for Pharmaceutical Use Part 5 Functional Requirements and Testing | Project-Approval |
| 302 | MHD/12/25963 | Aluminium Caps and Aluminium/Plastic Caps for Infusion Bottles and Injection Vials — General Requirements and Test Methods | Project-Approval |
| 303 | MHD/12/25964 | Needle-Based Injection Systems for Medical Use — Requirements and Test Methods Part 1 Needle-Based Injection Systems | Project-Approval |
| 304 | MHD/12/25965 | Needle-Based Injection Systems for Medical Use — Requirements and Test Methods Part 3 Containers and Integrated Fluid Paths | Project-Approval |
| 305 | MHD/12/25967 | Needle-Based Injection Systems for Medical Use — Requirements and Test Methods Part 4 Needle-Based Injection Systems Containing Electronics | Project-Approval |
| 306 | MHD/12/25968 | Needle-Based Injection Systems for Medical Use — Requirements and Test Methods Part 5 Automated Functions | Project-Approval |
| 307 | MHD/12/25969 | Needle-Based Injection Systems for Medical Use — Requirements and Test Methods Part 6 On-body Delivery Systems | Project-Approval |
| 308 | MHD/12/25970 | Needle-Based Injection Systems for Medical Use — Requirements and Test Methods Part 7 Accessibility for Persons with Visual Impairment | Project-Approval |
| 309 | MHD/12/25972 | Primary Packaging Materials for Medicinal Products — Particular Requirements for the Application of ISO 9001 : 2015, with Reference to Good Manufacturing Practice ( GMP ) Amendment - 1 | Project-Approval |
| 310 | MHD/12/25974 | Prefilled Syringes Part 6 Plastic Barrels for Injectables and Sterilized Subassembled Syringes Ready for Filling | Project-Approval |
| 311 | MHD/12/25975 | Prefilled Syringes Part 7 Packaging Systems for Sterilized Subassembled Syringes Ready for Filling | Project-Approval |
| 312 | MHD/12/25976 | Prefilled Syringes Part 8 Requirements and Test Methods for Finished Prefilled Syringes | Project-Approval |
| 313 | MHD/13/23494 | Teat Knife Mcleans - Specification (First Revision) | Under Published |
| 314 | MHD/13/23516 | Veterinary Castrator - Specification (First Revision) | WC-Draft |
| 315 | MHD/13/23517 | Single Channel Uterine Catheter (Nelson Type) - Specification (First Revision) | Under Published |
| 316 | MHD/13/23523 | Cather for Cow - Specification (First Revision) | WC-Draft |
| 317 | MHD/13/23692 | Veterinary Surgical Instruments - Hoof Testing Forceps - Specification (First Revision) | P-Draft |
| 318 | MHD/13/23771 | Veterinary Surgical Instruments Teat Dilators Hudson Specification (First Revision) | Under Published |
| 319 | MHD/13/23787 | Veterinary Instruments - Stomach Pump - Specification First Revision | P-Draft |
| 320 | MHD/14/24687 | Requirements for the collection and transport of samples for medical laboratory examinations First Revision | Under Published |
| 321 | MHD/14/24695 | Clinical laboratory testing and in vitro diagnostic test systems Susceptibility testing of infectious agents and evaluation of performance of antimicrobial susceptibility test devices Part 2: Evaluation of performance of antimicrobial susceptibility test devices against reference broth micro-dilution (First Revision) | Under Published |
| 322 | MHD/14/24698 | Medical device software Part 3: Process reference model of medical device software life cycle processes IEC 62304 | Under Published |
| 323 | MHD/17/23687 | Health Informatics — Introduction to Ayurveda Informatics | Under Published |
| 324 | MHD/17/23688 | Health informatics — Identification of medicinal products — Data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms, units of presentation, routes of administration and packaging (First Revision) | Under Published |
| 325 | MHD/17/23689 | Health Informatics — Identification of Medicinal Products — Data Elements and Structures for the Unique Identification and Exchange of Regulated Medicinal Product Information Amendment - 1 | Under Published |
| 326 | MHD/17/23754 | Health informatics — Device interoperability Part 20601 Personal health device communication — Application profile — Optimized exchange protocol (First Revision) | Under Published |
| 327 | MHD/17/23773 | Health informatics — Device interoperability Part 10201 Point-of-care medical device communication — Domain information model (First Revision) | Under Published |
| 328 | MHD/17/23774 | Health informatics — Device interoperability Part 10404 Personal health device communication — Device specialization — Pulse oximeter (First Revision) | Under Published |
| 329 | MHD/17/23775 | Health informatics — Device interoperability Part 10407 Personal health device communication — Device specialization — Blood pressure monitor (First Revision) | Under Published |
| 330 | MHD/17/23776 | Health informatics — Device interoperability Part 10408 Personal health device communication — Device specialization — Thermometer (First Revision) | Under Published |
| 331 | MHD/17/23777 | Health informatics — Device interoperability Part 10415 Personal health device communication — Device specialization — Weighing scale (First Revision) | Under Published |
| 332 | MHD/17/23778 | Health informatics — Personal health device communication Part 10419 Device specialization — Insulin pump (First Revision) | Under Published |
| 333 | MHD/17/23779 | Health informatics — Device interoperability Part 10420 Personal health device communication — Device specialization — Body composition analyzer (First Revision) | Under Published |
| 334 | MHD/17/24645 | Health Informatics — Medical Waveform Format Part 2 Electrocardiography (First Revision) | WC-Draft |
| 335 | MHD/17/24647 | Health Informatics — Medical Waveform Format Part 3 Long-term Electrocardiography (First Revision) | WC-Draft |
| 336 | MHD/17/25053 | Health Informatics — HL7 Electronic Health Record-System Functional Model, Release 2.1 (EHR FM) (First Revision) | Under Published |
| 337 | MHD/17/25054 | Health Informatics — Personal Health Device Communication Part 10425 Device Specialization — Continuous Glucose Monitor (CGM) (First Revision) | Under Published |
| 338 | MHD/17/25055 | Health Informatics — Patient Healthcard Data Part 5 Identification Data (First Revision) | Under Published |
| 339 | MHD/17/25056 | Health Informatics — Framework for Healthcare and Related Data Reporting | Under Published |
| 340 | MHD/17/25057 | Health Informatics — Standard Communication Protocol — Computer-Assisted Electrocardiography | Under Published |
| 341 | MHD/17/25676 | Health informatics — Patient Healthcard Data Part 7 Medication Data (First Revision) | WC-Draft |
| 342 | MHD/17/25677 | Health Informatics — Medical Waveform Format Part 1 Encoding Rules | WC-Draft |
| 343 | MHD/17/25679 | Health Informatics — Device Interoperability Part 10101 Point-of-Care Medical Device Communication — Nomenclature (First Revision) | WC-Draft |
| 344 | MHD/17/25680 | Health Informatics — Classification of Purposes for Processing Personal Health Information (First Revision) | WC-Draft |
| 345 | MHD/17/25681 | Health informatics — Business Requirements for a Syntax to Exchange Structured Dose Information for Medicinal Products (First Revision) | WC-Draft |
| 346 | MHD/19/15611 | In-vitro Diagnostic (IVD) Devices - Blood Gas Analyzers | Under Published |
| 347 | MHD/19/15613 | In-vitro Diagnostic (IVD) Devices - Electrolyte Analyzer | Under Published |
| 348 | MHD/19/21867 | Biological Evaluation of Medical Devices Part 5 Ethylene oxide sterilization residuals | Under Published |
| 349 | MHD/19/22473 | Biological Evaluation of Medical Devices Part 7 Tests for irritation ISO 10993-23:2021 MOD | Under Published |
| 350 | MHD/19/25234 | Blood Cell Counter Analyzer | Project-Approval |
| 351 | MHD/19/25235 | Hemoglobin Analyzer | Project-Approval |
| 352 | MHD/19/25236 | Biological evaluation of absorbable medical devices Part 1: General requirements | Project-Approval |
| 353 | MHD/19/25237 | Biological evaluation of medical devices Part 33: Guidance on tests to evaluate genotoxicity | Project-Approval |
| 354 | MHD/19/25238 | Biological evaluation of medical devices Part 55: Interlaboratory study on cytotoxicity | Project-Approval |
| 355 | MHD/15/22659 | Medical electrical equipment X-ray tube assemblies for medical diagnosis Focal spot dimensions and related characteristics | Under Published |
| 356 | MHD/15/22664 | Medical electrical equipment Part 2 Particular requirements for basic safety and essential performance Section 2 High frequency surgical equipment and high frequency surgical accessories First revision | Under Published |
| 357 | MHD/15/22665 | Medical electrical equipment Part 2 Particular requirements for basic safety and essential performance Section 3 Short-wave therapy equipment First revision | Under Published |
| 358 | MHD/15/22666 | Medical electrical equipment Part 2 Particular requirements for basic safety and essential performance Section 10 Nerve and muscle stimulators First revision | Under Published |
| 359 | MHD/15/22667 | Medical electrical equipment Part 2 Particular requirements for basic safety and essential performance Section 43 X-ray equipment for interventional procedures Second revision | Under Published |
| 360 | MHD/15/22668 | Medical electrical equipment Part 2 Particular requirements for basic safety and essential performance Section 45 Mammographic X-ray equipment and mammographic stereotactic devices Second revision | Under Published |
| 361 | MHD/15/22669 | Medical electrical equipment Part 2 Particular requirements for basic safety and essential performance Section 54 X-ray equipment for radiography and radioscopy First revision | Under Published |
| 362 | MHD/15/22670 | Medical electrical equipment Part 2 Particular requirements for basic safety and essential performance Section 63 Dental extra-oral X-ray equipment First revision | Under Published |
| 363 | MHD/15/22671 | Medical electrical equipment Part 2 Particular requirements for basic safety and essential performance Section 65 Dental intra-oral X-ray equipment First revision | Under Published |
| 364 | MHD/15/24688 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 33 Magnetic resonance equipment for medical diagnosis IEC 60601-2-33: 2022 MOD First Revision | WC-Draft |
| 365 | MHD/15/24715 | Medical Electrical Equipment Part 2 Particular Requirements for Basic Safety and Essential Performance Section 41 Surgical luminaires and luminaires for diagnosis IEC 60601-2-41: 2021 MOD First Revision | WC-Draft |
| 366 | MHD/15/24718 | Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 46 Operating tables IEC 60601-2-46: 2023 MOD First Revision | WC-Draft |
| 367 | MHD/15/24732 | Medical Electrical Equipment Part 2 Particular Requirements for Basic Safety and Essential Performance Section 6 Particular requirements for the basic safety and essential performance of microwave therapy equipment IEC 60601-2-6: 2022 MOD First Revision | WC-Draft |
| 368 | MHD/15/24734 | Medical Electrical Equipment Medical Image Display Systems Part 1 Evaluation methods First Revision | WC-Draft |
| 369 | MHD/15/25315 | Medical electrical equipment Part 2 Particular requirements for the basic safety and essential performance Section 75 Photodynamic therapy and photodynamic diagnosis equipment | WC-Draft |
| 370 | MHD/15/25327 | Medical electrical equipment Part 2 Particular requirements for the basic safety and essential performance Section 83 Home light therapy equipment | WC-Draft |
| 371 | MHD/15/25328 | Medical electrical equipment Dosimeters with ionization chambers as used in Radiotherapy IEC 60731:2011AMD1:2016 CSV MOD | WC-Draft |
| 372 | MHD/11/18949 | Specification for Mouth Props and Airways London Hospital Pattern First Revision | Under Published |
| 373 | MHD/11/18974 | Specifications for Valve, Non-Rebreathing Part I Ruben's Pattern (First Revision) | Under Published |
| 374 | MHD/11/18975 | Specification for Valve Non-Rebreathing Part 2 Ambu-Hesses Pattern First Revision | Under Published |
| 375 | MHD/11/19247 | Drawover Portable Type Anaesthetic Apparatus - Specification (Second Revision) | Under Published |
| 376 | MHD/11/22279 | Medical Gas Pipeline Systems Part 1: Pipeline Systems for Compressed Medical Gases and Vacuum (First Revision) | Under Published |
| 377 | MHD/11/22425 | Anaesthetic and Respiratory Equipment Tracheostomy Tubes and Connectors | Under Published |
| 378 | MHD/11/22610 | Lung Ventilators Part 4 Particular Requirements for User-powered Resuscitators (First Revision) | Under Published |
| 379 | MHD/11/22611 | Anaesthetic and Respiratory Equipment-Tracheobronchial tubes (First Revision) | Under Published |
| 380 | MHD/11/22613 | Anaesthetic and Respiratory Equipment-Breathing Sets and Connectors | Under Published |
| 381 | MHD/11/22615 | Anaesthetic and Respiratory Equipment- Oropharyngeal Airways(First Revision) | Under Published |
| 382 | MHD/11/22626 | Suction Catheters for Use in the Respiratory Tract | Under Published |
| 383 | MHD/11/24987 | Anaesthetic and respiratory equipment Tracheal tubes and connectors (First Revision) | Under Published |
| 384 | MHD/11/25205 | Biocompatibility evaluation of breathing gas pathways in healthcare applications Part 1: Evaluation and testing within a risk management process | Under Published |
| 385 | MHD/11/25208 | Biocompatibility Evaluation of Breathing Gas Pathways in Healthcare Applications Part 2: Tests for Emissions of Particulate Matter | Under Published |
| 386 | MHD/11/25224 | Medical devices Sleep Apnoea Breathing Therapy Masks and Application Accessories | Under Published |
| 387 | MHD/11/25225 | Anaesthetic and Respiratory Equipment Low-Flow Nasal Cannulae for Oxygen Therapy | Under Published |
| 388 | MHD/11/25226 | Anaesthetic and Respiratory Equipment Low-Pressure Hose Assemblies for Use with Medical Gases | Under Published |
| 389 | MHD/11/25228 | Medical Suction Equipment Part 4: General Requirements | Under Published |
| 390 | MHD/11/25230 | Medical electrical equipment Part 2 Particular Requirements for Basic Safety and Essential Performance Section 87 High Frequency Ventilators | Under Published |
| 391 | MHD/11/25299 | Anaesthetic and respiratory equipment Supralaryngeal airways and connectors (First Revision) | F-Draft |
| 392 | MHD/11/25361 | Inhalational anaesthesia systems Part 7: Anaesthetic systems for use in areas with limited logistical supplies of electricity and anaesthetic gases | WC-Draft |
| 393 | MHD/11/25362 | Medical electrical equipment Part 2-90: Particular requirements for basic safety and essential performance of respiratory high-flow therapy equipment | WC-Draft |
| 394 | MHD/11/25363 | Medical electrical equipment Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients | WC-Draft |
| 395 | MHD/11/25364 | Medical electrical equipment Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment | WC-Draft |
| 396 | MHD/11/25365 | Medical electrical equipment Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment | WC-Draft |
| 397 | MHD/11/25366 | Lung ventilators and related equipment Vocabulary and semantics | WC-Draft |
| 398 | MHD/11/25367 | Systems for evacuation of plume generated by medical devices | Project-Approval |
| 399 | MHD/11/25368 | Anaesthetic vaporizers Agent specific filling systems | Project-Approval |
| 400 | MHD/11/25369 | Gas mixers for medical use Stand-alone gas mixers | Project-Approval |
| 401 | MHD/11/25370 | Inhalational anaesthesia systems Draw-over anaesthetic systems | Project-Approval |
| 402 | MHD/11/25371 | Anaesthetic and respiratory equipment User-applied labels for syringes containing drugs used during anaesthesia Colours design and performance | Project-Approval |
| 403 | MHD/11/25372 | Medical electrical equipment Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors | Project-Approval |
| 404 | MHD/11/25373 | Anaesthetic and respiratory equipment Heat and moisture exchangers HMEs for humidifying respired gases in humans Part 1: HMEs for use with minimum tidal volumes of 250 ml | Project-Approval |
| 405 | MHD/11/25374 | Anaesthetic and respiratory equipment Heat and moisture exchangers HMEs for humidifying respired gases in humans Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml | Project-Approval |
| 406 | MHD/11/25375 | Anaesthetic and respiratory equipment General requirements for airways and related equipment | Project-Approval |
| 407 | MHD/11/25376 | Anaesthetic and respiratory equipment Voice prostheses | Project-Approval |
| 408 | MHD/11/25381 | Breathing system filters for anaesthetic and respiratory use Part 1: Salt test method to assess filtration performance | Project-Approval |
| 409 | MHD/11/25383 | Breathing system filters for anaesthetic and respiratory use Part 2: Non-filtration aspects | Project-Approval |
| 410 | MHD/11/25384 | Anaesthetic and respiratory equipment Cuff pressure indication control and regulation devices | Project-Approval |
| 411 | MHD/11/25387 | Medical electrical equipment Deployment implementation and operational guidelines for identifying febrile humans using a screening thermograph | Project-Approval |
| 412 | MHD/11/25388 | Anaesthetic and respiratory equipment Air entrainment devices | Project-Approval |
| 413 | MHD/11/25389 | Biocompatibility evaluation of breathing gas pathways in healthcare applications Part 3: Tests for emissions of volatile organic substances | Project-Approval |
| 414 | MHD/11/25390 | Biocompatibility evaluation of breathing gas pathways in healthcare applications Part 4: Tests for leachables in condensate | Project-Approval |
| 415 | MHD/11/25392 | Respiratory equipment Particular requirements for basic safety and essential performance of infant cardiorespiratory monitors | Project-Approval |
| 416 | MHD/11/25393 | Respiratory equipment Particular requirements for basic safety and essential performance of infant cardiorespiratory monitors | Project-Approval |
| 417 | MHD/11/25396 | Anaesthetic and respiratory equipment Passive humidifiers | Project-Approval |
| 418 | MHD/11/25397 | Guidance on the selection of the appropriate means of ventilation based on the intended patient use environment and operator | Project-Approval |
| 419 | MHD/11/25398 | Anaesthetic and respiratory equipment Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans | Project-Approval |
| 420 | MHD/11/25399 | Anaesthetic and respiratory equipment Spirometers intended for the measurement of time forced expired volumes in humans | Project-Approval |
| 421 | MHD/09/23481 | Assistive products for walking manipulated by one arm Requirements and test methods Part 1: Elbow crutches | Under Published |
| 422 | MHD/09/23482 | Assistive products Classification and terminology | Under Published |
| 423 | MHD/09/23490 | Walking aids manipulated by one arm Requirements and test methods Part 4: Walking sticks with three or more legs | Under Published |
| 424 | MHD/09/23631 | Tips for assistive products for walking Requirements and test methods Part 1: Friction of tips | Under Published |
| 425 | MHD/09/23637 | Tips for assistive products for walking Requirements and test methods Part 2: Durability of tips for crutches | Under Published |
| 426 | MHD/09/23891 | Modular Lower Limb Orthotic Components – Specification Part 3 Stirrup Plates ( First Revision ) | Under Published |
| 427 | MHD/09/23892 | Specification for Modular Lower Limb Orthotic Components Part 4 Joint Unit Ankle First Revision | Finalization |
| 428 | MHD/09/23898 | Modular Lower Limb Orthotic Components Specification Part 7 Orthotic Joint Bars Ankle and Knee Upper and Lower First Revision | Under Published |
| 429 | MHD/09/23909 | Rehabilitation Equipment Wheelchairs Folding Junior Size Specification Second Revision | WC-Draft |
| 430 | MHD/09/23910 | Modular Lower Limb Orthotic Components — Specification Part 6 Orthotic Hip Joint (Joint Unit, Hip Drop Lock ) ( First Revision ) | Under Published |
| 431 | MHD/09/23913 | Adjustable Axillary Crutches – Specification ( Third Revision ) | Under Published |
| 432 | MHD/09/23915 | Rehabilitation Equipment — Wheelchairs Folding, Adult Size — Specification ( Second Revision ) | Under Published |
| 433 | MHD/09/23937 | Battery Operated Motorized Tricycle Specification First Revision | Finalization |
| 434 | MHD/09/23942 | Braille Slate – Specification ( First Revision ) | Under Published |
| 435 | MHD/09/24105 | Assistive products for walking manipulated by both arms Requirements and test methods Part 1: Walking frames | Under Published |
| 436 | MHD/09/24106 | Assistive products for walking manipulated by both arms Requirements and test methods Part 2: Rollators | Under Published |
| 437 | MHD/09/24107 | Walking aids manipulated by both arms Requirements and test methods Part 3: Walking tables | Under Published |
| 438 | MHD/09/24109 | Assistive products - Hoists for the transfer of persons - Requirements and test methods | Under Published |
| 439 | MHD/09/24149 | Wheelchairs Part 1: Determination of static stability | Under Published |
| 440 | MHD/09/24150 | Wheelchairs Part 2: Determination of dynamic stability of electrically powered wheelchairs | Under Published |
| 441 | MHD/09/24151 | Wheelchairs Part 3: Determination of effectiveness of brakes | Under Published |
| 442 | MHD/09/24152 | Wheelchairs Part 4: Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range | Under Published |
| 443 | MHD/09/24153 | Wheelchairs Part 5: Determination of dimensions mass and manoeuvring space | Under Published |
| 444 | MHD/09/24154 | Wheelchairs Part 6: Determination of maximum speed of electrically powered wheelchairs | Under Published |
| 445 | MHD/09/24155 | Wheelchairs Part 7: Measurement of seating and wheel dimensions | Under Published |
| 446 | MHD/09/24156 | Wheelchairs Part 8: Requirements and test methods for static impact and fatigue strengths | Under Published |
| 447 | MHD/09/24157 | Wheelchairs Part 9: Climatic tests for electric wheelchairs | Under Published |
| 448 | MHD/09/24158 | Wheelchairs Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs | Under Published |
| 449 | MHD/09/24159 | Wheelchairs Part 11: Test dummies | Under Published |
| 450 | MHD/09/24160 | Wheelchairs Part 13: Determination of coefficient of friction of test surfaces | Under Published |
| 451 | MHD/09/24162 | Wheelchairs Part 15: Requirements for information disclosure documentation and labelling | Under Published |
| 452 | MHD/09/24163 | Wheelchairs Part 19: Wheelchairs for use as seats in motor vehicles | Under Published |
| 453 | MHD/09/24495 | Prosthetics Structural testing of lower-limb prostheses Requirements and test methods | Under Published |
| 454 | MHD/09/24496 | Assistive products for personal hygiene that support users Requirements and test methods | Finalization |
| 455 | MHD/09/24497 | Accessible design Auditory guiding signals in public facilities | Under Published |
| 456 | MHD/09/25566 | Wheelchairs Part 14 Power and control systems for electrically powered wheelchairs and scooters - Requirements and test methods | WC-Draft |
| 457 | MHD/09/25567 | Wheelchairs Part 21 Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters and battery chargers | WC-Draft |
| 458 | MHD/09/25568 | Wheelchairs Part 22 Set-up procedures | WC-Draft |
| 459 | MHD/09/25569 | Wheelchairs Part 25 Lead-acid batteries and chargers for powered wheelchairs Requirements and test methods | WC-Draft |
| 460 | MHD/09/25570 | Wheelchairs Part 28 Requirements and test methods for stair-climbing devices | WC-Draft |
| 461 | MHD/09/25571 | Wheelchairs Part 30 Wheelchairs for changing occupant posture Test methods and requirements | WC-Draft |
| 462 | MHD/09/25795 | Accessible Design Application of Braille on Signage Equipment and Appliances | WC-Draft |
| 463 | MHD/09/25796 | Accessible design Information contents figuration and display methods of tactile guide maps | WC-Draft |
| 464 | MHD/09/25801 | Cane for Visually Handicapped Specification Part 1 Rigid Long and White Second revision | WC-Draft |
| 465 | MHD/09/25802 | Specification for Braille Paper First Revision | WC-Draft |
| 466 | MHD/09/25805 | Cane For Visually Handicapped Specification Part 2 Folding Type First Revision | WC-Draft |
| 467 | MHD/09/25806 | Specification for Modular lower limb Orthotic Components Part 1 Stirrups First revision | WC-Draft |
| 468 | MHD/09/25807 | Specification for Modular Lower Limb Orthotic Components Part 2 Stirrups Split First Revision | WC-Draft |
| 469 | MHD/09/25808 | Specification for Walking Sticks first revision | WC-Draft |
| 470 | MHD/09/25809 | Tricycle Single Hand Propelled RightLeft Junior Size Specification | WC-Draft |
| 471 | MHD/09/25825 | Specification for Rehabilitation Equipment Rough Terrain Active Wheelchairs Folding Rider-I Adult and Child Size First revision of IS 17063: 2018 | WC-Draft |
| 472 | MHD/09/25853 | Tricycle Hand Propelled Specification Second revision | Project-Approval |
| 473 | MHD/20/25726 | Nanotechnologies In vitro MTS assay for measuring the cytotoxic effect of nanoparticles | WC-Draft |
| 474 | MHD/20/25728 | Nanotechnologies —Use and application of acellular in vitro tests and methodologies to assess nanomaterial biodurability | WC-Draft |
| 475 | MHD/20/25729 | Nanotechnologies Considerations for performing toxicokinetic studies with nanomaterials | WC-Draft |
| 476 | MHD/21/22114 | Sharps Injury Protection — Requirements and Test Methods — Sharps Protection Features for Single-use Hypodermic Needles Introducers for Catheters and Needles Used for Blood Sampling | Under Published |
| 477 | MHD/21/23264 | Non- Chlorinated Plastic Bags for Storing and Transporting Bio- Medical Waste Specification Non-Autoclavable and Autoclavable | WC-Draft |
| 478 | MHD/23/23632 | Protocol for Medico-Legal Examination of Accused of Sexual Assault (Standard Operating Procedure) | Under Published |
| 479 | MHD/23/23633 | Protocol for Medico-Legal Examination of Survivor of Sexual Assault (Standard Operating Procedure) | Under Published |
| 480 | MHD/23/24725 | Formaldehyde Dosimeter | WC-Draft |