|
1 |
IS 1041 : 1988 |
Box Blanks for Jute Looms |
Product Specification |
------ |
|
2 |
IS 1042 : 1988 |
Boards for Lay Races of Jute Looms |
Product Specification |
------ |
|
3 |
IS 1043 : 1988 |
Blanks for Lay Blocks for Jute Looms |
Product Specification |
------ |
|
4 |
IS 10598 : 1997 |
Textile machinery – Guide rollers for dyeing and finishing machinery – Specification (first revision) |
Product Specification |
IS 10598 : 2023 |
|
5 |
IS 10626 : 1983 |
Dimensions of heald carrying rods and `C' shaped end loops of flat steel healds |
------ |
15760 : Part 3 |
|
6 |
IS 10795 : 1984 |
Specification for accessories for use in shuttles for pirn-changing automatic cotton looms |
Product Specification |
IS 10795 : 2024 |
|
7 |
IS 10936 : 1984 |
Co-ordinated dimensions of heald frames in relation to the pitch of the harness |
------ |
------ |
|
8 |
IS 11049 : 2014 |
Textile Machinery and Accessories — Dyeing and Finishing Machinery — Vocabulary of Ancillary Devices |
Terminology |
STANDARD WITHDRAWN |
|
9 |
IS 11059 : 1984 |
Specification for cylindrical tubes for open-end spinning |
Product Specification |
IS 11059 : 2022 |
|
10 |
IS 11187 : 1985 |
Spring bottoms for cylindrical sliver cans |
------ |
IS 14783 : Part 3 |
|
11 |
IS 11194 : 1985 |
Jockey Pulleys Used in Ring Spinning and Doubling Frames |
Product Specification |
------ |
|
12 |
IS 11274 : 1985 |
Roving Bobbin Holders |
Product Specification |
------ |
|
13 |
IS 11508 : 1985 |
Specification for faller bars for jute drawing frames |
Product Specification |
IS 11508 : 2023 |
|
14 |
IS 11510 : 1985 |
Specification for spindle for jute cop winding machine |
Product Specification |
IS 11510 : 2024 |
|
15 |
IS 11512 : 1985 |
Specification for faller screws for jute drawing frames |
Product Specification |
IS 11512 : 2023 |
|
16 |
IS 11529 : 1986 |
Specification for leather check straps for looms |
Product Specification |
STANDARD WITHDRAWN |
|
17 |
IS 1190 : 1990 |
Textile Machinery – Healds, twin wire, for weaving – Specification |
Product Specification |
IS 1190 : 2023 |
|
18 |
IS 11933 : 1987 |
Specification for 4B plastic pickers |
Product Specification |
IS 11933 : 2023 |
|
19 |
IS 1225 : 1972 |
Specification for leather picking bands for looms (first revision) |
Product Specification |
IS 1225 : 2023 |
|
20 |
IS 12318 : 1988 |
Specification for picking cone and picking stud for jute looms |
Product Specification |
IS 12318:2023 |
|
21 |
IS 12339 : 1988 |
Specification for crank shaft for jute looms |
Product Specification |
IS 12339:2023 |
|
22 |
IS 1274 : 1958 |
Cotton Tubular Bending to Drive Spindles for Cotton Textile Mills |
------ |
------ |
|
23 |
IS 12885 : 1990 |
Pressing roller assembly for jute drawing frame - Specification |
Product Specification |
IS 12885 : 2023 |
|
24 |
IS 12886 : 1990 |
Heart cam for jute spinning frame - Specification |
Product Specification |
IS 12886 : 2023 |
|
25 |
IS 12890 : 1990 |
Bobbin rail for jute spinning frames - Specification |
Product Specification |
IS 12890 : 2024 |
|
26 |
IS 12910 : 1990 |
Textile machinery - Reed - Guide for selection |
Others |
IS 12910 : 2023 |
|
27 |
IS 13681 : 1993 |
Textile Machinery and Accessories - Thread Guides for Jute Winding Machines |
Product Specification |
------ |
|
28 |
IS 13865 : Part 2 : 1994 |
Textile machinery and accessories - Packages of yarns and intermediate products: Part 2 forms of winding |
Terminology |
STANDARD WITHDRAWN |
|
29 |
IS 13880 : 1993 |
Textile machinery and accessories - Cotton spinning machinery - Working width |
Dimensions |
STANDARD WITHDRAWN |
|
30 |
IS 13991 : 1994 |
Textile machinery and accessories - Cylindrical tubes for draw - Twisters - Dimensions and permissible run - Out |
Dimensions |
STANDARD WITHDRAWN |
|
31 |
IS 14677 : 1999 |
Spindles with bolsters for CHARKHAS – Specification |
Product Specification |
IS 14677 : 2023 |
|
32 |
IS 15260 : 2002 |
Textile machinery – Two-for-one twisters – Vocabulary |
Terminology |
IS 15260 : 2022/ISO 9947 : 2005 |
|
33 |
IS 15417 : Part 1 : 2003 |
Textile machinery and accessories - Reeds: Part 1 metal reeds with double - Spring baulk - Dimensions and designation |
Dimensions |
SUPERSEDED BY IS/ISO 366-3 : 2009 |
|
34 |
IS 15417 : Part 2 : 2003 |
Textile machinery and accessories - Reeds: Part 2 plastic bound metal reeds - Dimensions and designation |
Dimensions |
SUPERSEDED BY IS/ISO 366-4 : 2005 |
|
35 |
IS 1555 : 1990 |
Textile machinery - Wire reed, pitch - Bound, for use in cotton loom - Specification (Third Revision) |
Product Specification |
SUPERSEDED BY IS/ISO 366-1 : 1988 |
|
36 |
IS 15760 : Part 3 : 2007 |
Textiles machinery and accessories – Main dimensions of flat steel healds with open end loops Part 3 Carrying rods for healds with C- and J- shaped end loops |
Dimensions |
decided by council |
|
37 |
IS 1619 : 1976 |
Specification for buffer band for cop-changing automatic looms (first revision) |
Product Specification |
IS 1619 : 2023 |
|
38 |
IS 1724 : 1971 |
Wooden warp bobbins for rabbeth spindles |
------ |
IS 9337 : Part 2 |
|
39 |
IS 1737 : 1976 |
Specification for spring buffers for cotton looms (first revision) |
Product Specification |
IS 1737 : 2023 |
|
40 |
IS 1738 : 1960 |
Large size spring buffers for cotton looms |
------ |
IS 1737 |
|
41 |
IS 1739 : 1978 |
Specification for cotton healds for use in cotton looms (Second Revision) |
Product Specification |
STANDARD WITHDRAWN |
|
42 |
IS 17454 : 2020 |
Guidelines and General Requirement of Sanitary Napkin Vending Machine |
Product Specification |
IS 17454:2023 |
|
43 |
IS 1794 : 1971 |
Specification for shuttles for plain calico looms (first revision) |
Product Specification |
------ |
|
44 |
IS 1896 : 1987 |
Specification for picking sticks for overpick cotton looms (second revision) |
Product Specification |
IS 1896 : 2023 |
|
45 |
IS 1906 : 1977 |
Recommendations for shape and dimensions of 4B pickers (second revision) |
Dimensions |
IS 1906 : 2023 |
|
46 |
IS 1927 : 1980 |
Flat Driving Chains |
Product Specification |
------ |
|
47 |
IS 1936 : 1961 |
Inset mail wire healds for use in cotton, silk, woolen and worsted weaving (excluding jacquard and fancy weaving) |
------ |
IS 1190 |
|
48 |
IS 1938 : 1990 |
Cotton cambs for use in jute looms – Specification (second revision) |
Product Specification |
IS 1938 : 2023 |
|
49 |
IS 2058 : 1973 |
Specification for shuttles for pirn-changing automatic cotton looms (first revision) |
Product Specification |
IS 2058 : 2023 |
|
50 |
IS 2487 : 1972 |
Specification for flat steel healds (excluding jacquard and leno weaving healds) (first revision) |
Product Specification |
IS 2487 : 2023 |
|
51 |
IS 2531 : 1979 |
Specification for crank shaft for cotton looms (first revision) |
Product Specification |
IS 2531:2023 |
|
52 |
IS 2579 : 1963 |
Box Back Blanks For Cotton Looms |
------ |
IS 9794 |
|
53 |
IS 2623 : 1964 |
Blanks For Sley Caps For Cotton Looms |
------ |
IS 9794 |
|
54 |
IS 2624 : 1964 |
Boards For Sley Races For Cotton Looms |
------ |
IS 9794 |
|
55 |
IS 2625 : 1964 |
Blanks For Sley Bottom For Cotton Looms |
------ |
IS 9794 |
|
56 |
IS 2698 : 1964 |
Leather roller skins |
------ |
IS 3446 |
|
57 |
IS 2699 : 1982 |
Specification for flats and flats' screws (first revision) |
Product Specification |
IS 2699 : 2023 |
|
58 |
IS 270 : 1950 |
Code for manufacture of pickers |
------ |
IS 1903, IS 1906 |
|
59 |
IS 2784 : 1971 |
Specification for shuttle for automatic cop-changing jute looms (first revision) |
Product Specification |
------ |
|
60 |
IS 2823 : 1972 |
Specification for twin wire healds for jacquard weaving (first revision) |
Product Specification |
IS 2823 : 2023 |
|
61 |
IS 2929 : 1964 |
Bushes for button shaft, rocking shaft and crank shaft used on plain calico looms |
------ |
IS 835, IS 2531 |
|
62 |
IS 3022 : 1983 |
Specification for metal reeds (Second Revision) |
Product Specification |
SUPERSEDED BY IS/ISO 366-1:1988 |
|
63 |
IS 3049 : 1965 |
Vulcanized fibre silver cans for spinning mills |
------ |
IS 7875 : Part 1 |
|
64 |
IS 3056 : 1965 |
Lap Rods |
------ |
------ |
|
65 |
IS 3078 : 1989 |
Rings for spinning and doubling frames – Specification (fourth revision) |
Product Specification |
IS 3078 : 2023 |
|
66 |
IS 3158 : 1965 |
Aluminium cylindrical silver cans for spinning mills |
------ |
IS 7875 : Part 2, IS 7875 : Part 3 |
|
67 |
IS 3165 : 1990 |
Textile Machinery - Beam, Weaver's, for Use in Plain Calico Loom |
Product Specification |
STANDARD WITHDRAWN |
|
68 |
IS 3166 : 1987 |
Reed spaces for plain calico looms (First Revision) |
Dimensions |
SUPERSEDED BY 366-1 : 1988 |
|
69 |
IS 3176 : 1983 |
Specification for top rollers for ring and speed frames (second revision) |
Product Specification |
IS 3176 : 2023 |
|
70 |
IS 3183 : 1965 |
Saw toothed wire for licker-in cylinder |
------ |
IS 9568 : Part 3 |
|
71 |
IS 3199 : 1965 |
Definition of side (left or right) of weaving preparatory machines and weaving looms |
Terminology |
IS 3199 : 2022 |
|
72 |
IS 3340 : 1976 |
Specification for harness (dobby and jacquard) (first revision) |
Product Specification |
IS 3340 : 2024 |
|
73 |
IS 3341 : 1965 |
Dobby Harness |
------ |
IS 3340 |
|
74 |
IS 3368 : 1984 |
Specification for wooden heald frames for wire and flat steel healds (second revision) |
Product Specification |
------ |
|
75 |
IS 342 : 1976 |
Varnish, Acid Resisting |
------ |
------ |
|
76 |
IS/ISO 342 : 1983 |
Textile machinery and accessories - Worsted and woollen cards - Width of cylinder and width on the wire |
Dimensions |
STANDARD WITHDRAWN |
|
77 |
IS 3446 : 1977 |
Leather Aprons For Drafting Systems |
------ |
------ |
|
78 |
IS 3496 : 1966 |
Specification for dobby lags and pegs |
Product Specification |
STANDARD WITHDRAWN |
|
79 |
IS 3619 : 1966 |
Wooden Staves For Cotton Healds |
------ |
IS 1739 |
|
80 |
IS 3625 : Part 2 : 1984 |
Specification for warp tubes for ring spinning and doubling spindles – Part 2 Recommended dimensions for tubes, taper 1:38 (second revision) |
Dimensions |
IS 17868 : 2022 |
|
81 |
IS 3625 : Part 3 : 1984 |
Specification for warp tubes for ring spinning and doubling spindles – Part 3 Recommended dimensions for tubes, taper 1:64 (second revision) |
Dimensions |
IS 17868 : 2022 |
|
82 |
IS 3627 : 1966 |
Specification for cloth rollers for plain cotton looms |
Product Specification |
IS 3627 : 2023 |
|
83 |
IS 3683 : 1987 |
Specification for drop wires for warp stop motions (second revision) |
Product Specification |
IS 3683 : 2022 |
|
84 |
IS 3698 : 1991 |
Textile Machinery - Spindle for ring frame, Rabbeth type |
------ |
------ |
|
85 |
IS 3825 : 1990 |
Inset mail wire healds for jute weaving – Specification (second revision) |
Product Specification |
IS 3825 : 2023 |
|
86 |
IS 3833 : 1966 |
Flyer Bobbins |
------ |
IS 9337 : Part 1 |
|
87 |
IS 3834 : 1966 |
Lease Rods For Cotton Looms |
------ |
------ |
|
88 |
IS 3934 : 1989 |
Aluminium plug type spindles for spinning and doubling frames – Specification (second revision) |
Product Specification |
IS 3934 : 2023 |
|
89 |
IS 3977 : 1967 |
Bottom Roller For Speed Frames |
------ |
IS 2510 |
|
90 |
IS 4042 : 1967 |
Specification for single faced sluice gates (200 To 1200 Mm Size) |
------ |
IS 3176 |
|
91 |
IS 4187 : 1967 |
Skewers for Use on Cotton Speed Frames |
Product Specification |
------ |
|
92 |
IS 4416 : 1967 |
Specification for dobby barrels |
Product Specification |
STANDARD WITHDRAWN |
|
93 |
IS 4417 : 1971 |
Specification for weft pirns for shuttles for pirn-changing automatic cotton, woollen and worsted looms (first revision) |
Product Specification |
IS 4417 : 2024 |
|
94 |
IS 4438 : 1967 |
Specification for perforated strips for take-up rollers |
Product Specification |
IS 4438 : 2023 |
|
95 |
IS 4465 : 1984 |
Specification for metal heald frames for flat steel healds (second revision) |
Product Specification |
IS 4465 : 2024 |
|
96 |
IS 4470 : 1976 |
Specification for all - Metal leasing reeds for warping (First Revision) |
Product Specification |
SUPERSEDED BY IS/ISO 366-2 : 2009 |
|
97 |
IS 4775 : 1976 |
Specification for picking sticks for automatic and underpick looms (first revision) |
Product Specification |
IS 4775 : 2023 |
|
98 |
IS 4888 : Part 4 : 1982 |
Cones for Yarn Winding - Part IV : Half Angle of the Cone 915' |
Product Specification |
------ |
|
99 |
IS 4892 : 1987 |
Synthetic Rubber Aprons (Reinforced) for Drafting Systems |
Product Specification |
------ |
|
100 |
IS 5138 : 2001 |
Ear-shaped Metal Travellers for Doubling Frames |
------ |
IS 15761 : Part 2 |
|
101 |
IS 5141 : 1969 |
Specification for wooden cones for winding yarn |
Product Specification |
STANDARD WITHDRAWN |
|
102 |
IS 5492 : 1969 |
Pirns for Woollen and Worsted Plain Looms |
Product Specification |
------ |
|
103 |
IS 5938 : 1970 |
Spindle gauges for cotton ring spinning and ring doubling (twisting) frames |
------ |
IS/ISO 94 |
|
104 |
IS 6001 : 1971 |
Specification for flyer spindles |
Product Specification |
IS 6001:2023 |
|
105 |
IS 6254 : 1971 |
Specification for side weft forks and grates for non-automatic looms |
Product Specification |
IS 6254 : 2024 |
|
106 |
IS 6300 : 1971 |
Pickers savers (formaldehyde tanned leather) |
------ |
IS 1737 |
|
107 |
IS 6317 : 1971 |
Rings for ring doubling (twisting) frames (for ear shaped traveller) |
------ |
IS 3078 |
|
108 |
IS 699 : Part 1 : 1993 |
Textile machinery and accessories - Cross wound spool centres for jute winding machines Part 1 Spool centres for spool winding machines |
Product Specification |
------ |
|
109 |
IS 699 : Part 2 : 1993 |
Textile machinery and accessories - Cross wound spool centres for jute winding machines Part 2 Spool centres for precision winding machines |
Product Specification |
------ |
|
110 |
IS 7488 : 1974 |
Working widths of worsted and woollen cards |
------ |
IS/ISO 342 |
|
111 |
IS 759 : 1988 |
Blanks for Swells of Jute Looms |
Product Specification |
------ |
|
112 |
IS 7614 : 1975 |
Specification for wooden bobbins for ring doubling and twisting frames |
Product Specification |
STANDARD WITHDRAWN |
|
113 |
IS 7875 : Part 1 : 1984 |
Sliver Cans Used in Textile Mills - Part I : General Requirements |
------ |
IS 14783 : Part 1,2 |
|
114 |
IS 7875 : Part 2 : 1987 |
Sliver Cans Used in Textile - Part 2 : Vulcanized Fibre Sliver Cans |
------ |
IS 14783 : Part 1, IS 14783 : Part 2 |
|
115 |
IS 7875 : Part 3 : 1987 |
Sliver Cans Used in Textile Mills - Part 3 : Aluminium Alloy Silver Cans |
------ |
IS 14783 : Part 1, IS 14783 : Part 2 |
|
116 |
IS 7875 : Part 4 : 1983 |
Sliver Cans Used in Textile Mills - Part 4 : High Density Polyethylene Sliver Cans |
------ |
IS 14783 : Part 1, IS 14783 : Part 2 |
|
117 |
IS 7875 : Part 5 : 1985 |
Sliver Cans Used in Textile Mills - Part 5 : Sliver Cans with Castors |
------ |
IS 14783 : Part 1, IS 14783 : Part 2 |
|
118 |
IS 8014 : 1983 |
Classification and nomenclature of dyeing and finishing machinery (First Revision) |
Terminology |
STANDARD WITHDRAWN |
|
119 |
IS 8137 : 1976 |
Specification for springs for plain calico looms |
Product Specification |
IS 8137 : 2023 |
|
120 |
IS 8138 : 1976 |
Specification for picking nose, boss and shell for looms |
Product Specification |
IS 8138 : 2023 |
|
121 |
IS 8139 : 1976 |
Specification for picking cone and bolt for looms |
Product Specification |
IS 8139 : 2023 |
|
122 |
IS 835 : 1978 |
Specification for bottom shaft for cotton looms (first revision) |
Product Specification |
IS 835 : 2023 |
|
123 |
IS 836 : 1962 |
Lappets for cotton ring spinning frame |
------ |
------ |
|
124 |
IS 838 : 1976 |
Tin Rollers for Cotton Ring Spinning Frames |
Product Specification |
------ |
|
125 |
IS 8545 : 1977 |
Specification for loom pickers |
Product Specification |
IS 8545 : 2023 |
|
126 |
IS 8546 : 1977 |
Requirements for leather or raw - Hide exclusively used in the manufacture of pickers |
Product Specification |
STANDARD WITHDRAWN |
|
127 |
IS 8547 : 1977 |
Recommendations on shape and dimensions of single box picker for automatic looms |
Dimensions |
decided by council |
|
128 |
IS 8684 : 1978 |
Classification of terms for shuttles |
Terminology |
8684 : 2023 |
|
129 |
IS 8750 : 1978 |
Code of practice for packing of bottom rollers for drafting systems |
Code of Practice |
------ |
|
130 |
IS 8831 : 1978 |
Code of practice for maintenance of bottom rollers for drafting systems |
Code of Practice |
------ |
|
131 |
IS 8875 : 1978 |
Specification for shedding tappets for plain calico looms |
Product Specification |
IS 8875 : 2023 |
|
132 |
IS 8974 : 1978 |
Aprons (Combing Leathers) for Gill Box Used on Worsted Machinery |
Product Specification |
------ |
|
133 |
IS 8975 : 1978 |
Aprons (Combing Leathers) for French Combs used on Worsted Machinery |
Product Specification |
------ |
|
134 |
IS 9244 : Part 1 : 1979 |
Code of practice for storage and use of textile mill leather accessories – Part 1 Pickers |
Code of Practice |
IS 9244 (Part 1) : 2023 |
|
135 |
IS 9244 : Part 2 : 1979 |
Code of practice for storage and use of textile mill leather accessories: Part 2 picking bands |
Code of Practice |
STANDARD WITHDRAWN |
|
136 |
IS 9280 : 1979 |
Specification for wooden shuttle blocks for non-automatic looms |
Product Specification |
IS 9280 : 2023 |
|
137 |
IS 9287 : 1979 |
Specification for wooden shuttle blocks for pirn-changing automatic looms |
Product Specification |
IS 9287 : 2023 |
|
138 |
IS 9292 : 1979 |
Warper's Beams |
Product Specification |
STANDARD WITHDRAWN |
|
139 |
IS 9337 : Part 1 : 1979 |
Specification for bobbins and pirns used in textile mills: Part 1 wooden flyer bobbins |
Product Specification |
STANDARD WITHDRAWN |
|
140 |
IS 9337 : Part 2 : 1983 |
Specification for bobbins and pirns used in textile mills: Part 2 wooden warp bobbins for rabbeth spindles |
Product Specification |
STANDARD WITHDRAWN |
|
141 |
IS 94 : 1950 |
Oil Paste for Paints to Indian Standard Colours |
------ |
------ |
|
142 |
IS 9765 : 1981 |
Terminology of stenters |
Terminology |
------ |