|
1 |
IS 11000 : Part 1 : Sec 1 : 1988 |
Fire Hazard Testing: Part 1 Guidance For The Preparation Of Requirements And Test Specifications For Assessing Fire Hazard Of Electronic And Electrical Items, Sec 1 General Guidance |
Code of Practice |
IS/IEC 60695-1-11 : 2014 |
|
2 |
IS 11000 : Part 1 : Sec 2 : 1988 |
Fire Hazard Testing : Part 1 Guidance For The Preparation Of Requirements And Test Specifications For Assessing Fire Hazard Of Electronic And Electrical Items, Sec 2 Guidance For Electronic Components |
Methods of tests |
decided by council |
|
3 |
IS 11000 : Part 1 : Sec 3 : 1993 |
Fire hazard testing: Part 1 guidance for the preparation of requirements test specifications for assessing fire hazard of electronic and electrical items - Sec 3: guidance for use of preselection procedures |
Methods of tests |
IS/IEC 60695-1-30 : 2017 |
|
4 |
IS 11000 : Part 1 : Sec 40 : 2015 |
Fire hazard testing: Part 1 guidance for assessing the fire hazard of electrotechnical products: Sec 40 insulating liquids |
Code of Practice |
IS/IEC 60695-1-40 : 2013 |
|
5 |
IS 11000 : Part 2 : Sec 1 : 2018 |
Fire hazard testing: Part 2 test methods: Sec 1 glow - Wire apparatus and common test procedure (Second Revision) |
Methods of tests |
------ |
|
6 |
IS 11000 : Part 2 : Sec 2 : 2008 |
Fire hazard testing: Part 2 test methods: Sec 2 needle - Flame test method - Apparatus, cofirmatory test arrangement and guidance (First Revision) |
Methods of tests |
IS/IEC 60695-11-5 : 2016 |
|
7 |
IS 11000 : Part 2 : Sec 3 : 1994 |
Fire hazard testing: Part 2 test methods: Sec 3 bad - Connection test with heaters |
Code of Practice |
Decided by Council |
|
8 |
IS 11000 : Part 3 : Sec 1 : 1993 |
Fire hazard testing: Part 3 example of fire hazard assessment procedures and interpretation of results: Sec 1 combustion characteristics and survey of test methods for their determination |
Others |
IS/IEC 60695-1-30 : 2017 |
|
9 |
IS 13736 : Part 2 : Sec 4 : 1993 |
Classification of environmental conditions: Part 2 environmental conditions appearing in nature: Sec 4 solar radiation and temperature |
Code of Practice |
IS/IEC 60721-2-4 : 2018 |
|
10 |
IS 13736 : Part 2 : Sec 7 : 1993 |
Classification of environmental conditions: Part 2 environmental conditions appearing in nature: Sec 7 fauna and flora |
Code of Practice |
IS/IEC 60721-2-7 : 2018 |
|
11 |
IS 13736 : Part 3 : Sec 0 : 1993 |
Classification of environmental conditions: Part 3 classification of groups of environmental parameters and their severities: Sec 0: Introduction |
Code of Practice |
IS/IEC 60721-3-0 : 2020 |
|
12 |
IS 13736 : Part 3 : Sec 1 : 1993 |
Classification of environmental conditions: Part 3 classification of groups of environmental parameters and their severities: Sec 1 storage |
Code of Practice |
IS/IEC 60721-3-1 :2018 |
|
13 |
IS 13736 : Part 3 : Sec 2 : 1993 |
Classification of environmental conditions: Part 3 classification of groups of environmental parameters and their severities: Sec 2 transportation |
Code of Practice |
IS/IEC 60721-3-2 : 2018 |
|
14 |
IS 13736 : Part 3 : Sec 3 : 1993 |
Classification of environmental conditions: Part 3 classification of groups of environmental parameters and their severities: Sec 3 stationary use at weatherprotected locations |
Code of Practice |
IS/IEC 60721-3-3 : 2019 |
|
15 |
IS 13736 : Part 3 : Sec 4 : 1993 |
Classification of environmental conditions: Part 3 classification of groups of environmental parameters and their severities: Sec 4 stationary use at non - Weather protected locations |
Code of Practice |
IS/IEC 60721-3-4 : 2019 |
|
16 |
IS 13736 : Part 3 : Sec 5 : 1993 |
Classification of environmental conditions: Part 3 classification of groups of environmental parameters and their severities: Sec 5 ground vehicle installations |
Code of Practice |
IS/IEC 60721-3-5 : 1997 |
|
17 |
IS 13736 : Part 3 : Sec 7 : 1993 |
Classification of environmental conditions: Part 3 classification of groups of environmental parameters and their severities: Sec 7 portABle and non - Stationary use |
Code of Practice |
IS/IEC 60721-3-7 : 2002 |
|
18 |
IS 1885 : Part 84 : 2018 |
Electrotechnical vocabulary: Part 84 terminology concerning fire tests for electrotechnical products (Second Revision) |
Terminology |
IS 1885 PART 84 : 2022 |
|
19 |
IS/IEC 60068 : Part 3 : Sec 1 : 2011 |
Environmental testing Part 3: Supporting Documentation and guidance Sec 1: Cold and dry heat tests |
Methods of tests |
IS/IEC 60068-3-1 : 2023 |
|
20 |
IS/IEC 60068 : Part 3 : Sec 4 : 2001 |
Environmental Testing Part 3 Supporting documentation and guidance Sec 4 Damp heat tests |
Methods of tests |
IS/IEC 60068-3-4 : 2023 |
|
21 |
IS/IEC 60695 : Part 2 : Sec 12 : 2014 |
Fire Hazard Testing Part 2 Glowing / Hot-Wire Based Test Methods Section 12 Glow-wire flammability index ( GWFI ) test method for materials |
Methods of tests |
IS 60695 (Pt.2/Sec.12):2021 |
|
22 |
IS/IEC 60695 : Part 2 : Sec 13 : 2014 |
Fire Hazard Testing Part 2 Glowing / Hot-Wire Based Test Methods Section 13 Glow-wire ignition temperature ( GWIT ) test method for materials |
Methods of tests |
IS/IEC 60695-2-13 : 2021 |
|
23 |
IS/IEC 60695 : Part 2 : Sec 11 : 2014 |
Fire Hazard Testing Part 2-11 Glowing / Hot-Wire Based Test Methods Glow-Wire Flammability Test Method for End-Products ( GWEPT ) |
Methods of tests |
IS 60695 (Pt.2/Sec.11):2021 |
|
24 |
IS 9000 : Part 1 : 1988 |
Basic environmental testing procedures for electronic and electrical items: Part 1 general (First Revision) |
Methods of tests |
IS/IEC 60068-1 : 2013 |
|
25 |
IS 9000 : Part 2 : Sec 1 to 4 : 1977 |
Basic environmental testing procdures for electronic and electrical items: Part 2 cold test |
Methods of tests |
IS/IEC 60068-2-1 : 2007 |
|
26 |
IS 9000 : Part 3 : Sec 1 to 5 : 1977 |
Basic environmental testing procedures for electronic and electrical items: Part 3 dry heat test |
Methods of tests |
IS/IEC 6008-2-2 : 2007 |
|
27 |
IS 9000 : Part 5 : Sec 1 AND 2 : 1981 |
Basic environmental testing procedures for electronic and electrical items: Part 5 damp heat (Cyclic) test |
Methods of tests |
IS/IEC 60068-2-30 : 2005 |
|
28 |
IS 9000 : Part 6 : 1978 |
Basic environmental testing procedures for electronic and electrical items: Part 6 composite temperature/humidity cyclic test |
Methods of tests |
IS/IEC 60068-2-38 : 2021 |
|
29 |
IS 9000 : Part 7 : Sec 6 : 1988 |
Basic environmental testing procedures for electronic and electrical items: Part 7 impact test: Sec 6 test ee: bounce |
Methods of tests |
IS/IEC 60068-2-55 : 2013 |
|
30 |
IS 9000 : Part 7 : Sec 1 to 5 : 1979 |
Basic environmental testing procedures for electronic and electrical items: Part 7 impact test |
Methods of tests |
decided by council |
|
31 |
IS 9000 : Part 8 : 1981 |
Basic environmental testing procedures for electronic and electrical items: Part 8 vibration (Sinusoidal) test |
Methods of tests |
IS/IEC 60068-2-6 : 2007 |
|
32 |
IS 9000 : Part 9 : 1984 |
Basic environmental testing procedures for electronic and electrical items: Part 9 acceleration (Steady State) test |
Methods of tests |
IS/IEC 60068-2-7 : 1983 |
|
33 |
IS 9000 : Part 10 : 1979 |
Basic environmental testing procedures for electronic and electrical items: Part 10 mould growth test |
Methods of tests |
IS/IEC 60068-2-10 : 2018 |
|
34 |
IS 9000 : Part 12 : 1981 |
Basic environmental testing procedures for electronic and electrical items: Part 12 dust test |
Methods of tests |
decided by council |
|
35 |
IS 9000 : Part 13 : 1981 |
Basic environmental testing procedures for electronic and electrical items: Part 13 low air pressure test |
Methods of tests |
IS/IEC 60068-2-13 : 2021 |
|
36 |
IS 9000 : Part 14 : Sec 1 to 3 : 1988 |
Basic environmental testing procedures for electronic and electrical items:Part 14 test n:change of temperature (First Revision) |
Methods of tests |
IS/IEC 60068-2-14 : 2009 |
|
37 |
IS 9000 : Part 15 : Sec 1 to 9 : 1982 |
Basic environmental testing procedures for electronic and electrical items: Part 15 sealing test |
Methods of tests |
IS/IEC 60068-2-17 : 1994 |
|
38 |
IS 9000 : Part 16 : 1983 |
Basic environmental testing procedures for electronic and electrical items: Part 16 driving rain test |
Methods of tests |
decided by council |
|
39 |
IS 9000 : Part 17 : 1985 |
Basic environmental testing procedures for electronic and electrical items: Part 17 radiation test (First Revision) |
Methods of tests |
IS/IEC 60068-2-5 : 2018 |
|
40 |
IS 9000 : Part 20 : 1979 |
Basic environmental testing procedures for electronic and electrical items: Part 20 resistance to cleaning solvents and permanence of markings |
Methods of tests |
IS/IEC 60068-2-45:1980 |
|
41 |
IS 9000 : Part 21 : 1985 |
Basic environmental testing procedures for electronic & electrical items: Part 21 acoustics noise test |
Methods of tests |
decided by council |
|
42 |
IS 9000 : Part 23 : 1984 |
Basic environmental testing procedures for electronic and electrical items: Part 23 drip proof test |
Methods of tests |
decided by council |
|
43 |
IS 9000 : Part 27 : 1986 |
Basic environmental testing procedures for electronic and electrical items: Part 27 ultrasonic cleaning test |
Methods of tests |
Deicded by council |
|
44 |
IS 9000 : Part 31 : 1978 |
Basic environmental testing procedures for electronic and electrical items: Part 31 combined cold/low air pressure tests |
Methods of tests |
decided by council |
|
45 |
IS 9000 : Part 32 : 2006 |
Basic environmental testing procedures for electronic and electrical items: Part 32 information for specification writers - Test summaries |
Methods of tests |
Decided by council |
|
46 |
IS 9001 : Part 1 : 1984 |
Guidance for environmental testing: Part 1 General |
Code of Practice |
IS/IEC 60068-1 : 2013 |
|
47 |
IS 9001 : Part 2 : 1977 |
Guidance for environmental testing: Part 2 cold and dry heat tests |
Code of Practice |
IS/IEC 60068-3-1 : 2011 |
|
48 |
IS 9001 : Part 3 : 1978 |
Guidance for environmental testing: Part 3 change of temperature |
Code of Practice |
IS/IEC 60068-2-14 : 2009 |
|
49 |
IS 9001 : Part 4 : 1979 |
Guidance for environmental testing:Part 4 damp heat tests |
Code of Practice |
IS/IEC 60068-3-4 : 2001 |
|
50 |
IS 9001 : Part 5 : 1979 |
Guidance for environmental testing: Part 5 resistance to cleaning solvents and permanence of markings |
Code of Practice |
IS/IEC 60068-2-45 : 1980 |
|
51 |
IS 9001 : Part 8 : 1982 |
Guidance for environmental testing: Part 8 sealing test |
Code of Practice |
IS/IEC 60068-2-17 : 1994 |
|
52 |
IS 9001 : Part 10 : 1975 |
Guidance for environmental testing: Part 10 mould growth test |
Code of Practice |
pub-013-1-2020 |
|
53 |
IS 9001 : Part 11 : 1973 |
Guidance for environmental testing: Part 11 solar radiation test |
Code of Practice |
IS/IEC 60068-2-5 : 2018 |
|
54 |
IS 9001 : Part 12 : 1977 |
Guidance for environmental testing: Part 12 mounting of electronic and electrical items for dynamic tests |
Code of Practice |
IS/IEC 60068-2-47 : 2005 |
|
55 |
IS 9001 : Part 13 : 1981 |
Guidance for environmental testing: Part 13 vibration (Sinusoidal) test |
Code of Practice |
IS/IEC 60068-2-6 : 2007 |
|
56 |
IS 9001 : Part 14 : 1981 |
Guidance for environmental testing: Part 14 storage tests |
Code of Practice |
decided by council |
|
57 |
IS 9001 : Part 15 : 1984 |
Guidance for environmental testing: Part 15 acceleration (Steady State) test |
Code of Practice |
IS/IEC 60068-2-7 : 1983 |
|
58 |
IS 9001 : Part 16 : 1985 |
Guidance for environmental testing: Part 16 acoustic noise test |
Code of Practice |
decided by council |
|
59 |
IS 9001 : Part 17 : Sec 5 : 1988 |
Guidance for environmental testing: Part 17 impact test: Sec 5 bounce |
Code of Practice |
IS/IEC 60068-2-55 : 2013 |
|
60 |
IS 9001 : Part 17 : Sec 1TO4 : 1985 |
Guidance for environmental testing: Part 17 impact test |
Code of Practice |
decided by council |
|
61 |
IS 9001 : Part 18 : 1986 |
Guidance for environmental testing: Part 18 ultrasonic cleaning test |
Code of Practice |
decided by council |
|
62 |
IS 9002 : Part 1 : 1977 |
Specification for Equipment for environmental tests for electronic and electrical items: Part 1: chamber for cold test |
Methods of tests |
IS/IEC 60068-2-1 : 2007 |
|
63 |
IS 9002 : Part 2 : 1977 |
Specification for Equipment and environmental tests for electronic and electrical items: Part 2 chamber for dry heat test |
Methods of tests |
IS/IEC 60068-2-2 : 2007 |
|
64 |
IS 9002 : Part 4 : 1979 |
Specification for equipment for environmental tests for electronic and electrical items: Part 4 chamber for mould growth test |
Methods of tests |
IS/IEC 60068-2-10 : 2018 |
|
65 |
IS 9002 : Part 5 : 1979 |
Specification for equipment for environmental tests for electronic and electrical items: Part 5 equipment for vibration (Sinusoidal) test |
Methods of tests |
IS/IEC 60068-2-6 : 2007 |
|
66 |
IS 9002 : Part 7 : 1983 |
Specification for equipment for environmental tests for electronic and electrical items: Part 7 bump test machine |
Code of Practice |
decided by council |
|
67 |
IS 9002 : Part 8 : 1984 |
Specification for equipment for environmental tests for electronic and electrical items: Part 8 dust chamber |
Methods of tests |
decided by council |
|
68 |
IS 9002 : Part 9 : 1984 |
Specification for equipment for environmental tests for electronic and electrical items: Part 9 acceleration (Steady State) test machine |
Methods of tests |
IS/IEC 60068-2-7 : 1983 |
|
69 |
IS 9002 : Part 10 : Sec 1 : 1985 |
Specification for equipment for environmental tests for electronic and electrical items: Part 10 shock test machine: Sec 1 free fall type |
Others |
decided by council |
|
70 |
IS 9002 : Part 11 : 1984 |
Specifiction for equipment for environmental tests for electronic and electrical items: Part 11 drop, toppling and free fall test machine / platform |
Others |
decided by council |
|
71 |
IS 9002 : Part 12 : 1986 |
Specification for equipment for environmental tests for electronic and electrical items: Part 12 salt mist/fine mist chamber |
Others |
------ |
|
72 |
IS 9002 : Part 13 : Sec 1 : 1985 |
Specificaiton for equipment for environmental tests for electronic and electrical items: Part 13 equipment for change of temperature test: Sec 1 two chamber system |
Code of Practice |
decided by council |
|
73 |
IS 9002 : Part 13 : Sec 3 : 1985 |
Specification for equipment for environmental tests for electronic and electrical items: Part 13 equipment for change of temperature test: Sec 3 two baths |
Code of Practice |
decided by council |
|
74 |
IS 9002 : Part 14 : 1985 |
Specification for equipment for environmental tests for electronic and electrical items: Part 14 low air pressure chamber |
Methods of tests |
IS/IEC 60068-2-13 : 2021 |
|
75 |
IS 9002 : Part 15 : 1988 |
Specification for equipment for environmental tests for electronic and electrical items: Part 15 low air pressure and temperature chamber |
Methods of tests |
diecided by council |