|
1 |
IS 10482 : Part 1 : 1983 |
Specification for connectors for printed wiring board: Part 1 test schedule and requirements |
Others |
Decided by Council |
|
2 |
IS 10482 : Part 2 : 1983 |
Specification for connectors for printed wiring board: Part 2 male adapter, contact spacing 3.962 mm, category c, type 10482 IS - 01 - 6/10/12/15/16/18/22 - A/b - 2 - A - 5/1.27 or 2.54/0.4 |
Others |
Decided by Council |
|
3 |
IS 10482 : Part 3 : 1983 |
Specification for connectors for printed wiring board: Part 3 socket, card insertion, contact spacing 3.962 mm, category a, types 10482 IS - 02 - 6/10/12/15/16/18/22 - A/b - 2 - A/b/c - 5/1 - 27 or2.54/0.4 |
Others |
Decided by Council |
|
4 |
IS 10482 : Part 4 : 1986 |
Connectors for Printed Wiring Board - Part 4 : Socket, Card Insertion, Contact Spacing 3.962 mm, Categories A and AD Types 10482 IS-03 |
Others |
Decided by Council |
|
5 |
IS 10544 : Part 1 : 1983 |
Radio Drive Cords: Part 1 Braided Nylon, Silk Core |
------ |
------ |
|
6 |
IS 10544 : Part 2 : 1983 |
Radio Drive Cords: Part 2 Woven Nylon, Glass Core |
------ |
------ |
|
7 |
IS 10544 : Part 3 : 1983 |
Radio Drive Cords: Part 3 Braided Polyester, Nylon Core |
------ |
------ |
|
8 |
IS 11162 : Part 1 : 1985 |
Dimensions of non - Insulated terminal tags for electronic equipment: Part 1 type 1 |
Dimensions |
Decided by Council |
|
9 |
IS 11162 : Part 2 : 1985 |
Dimensions of non - Insulated terminal tags for electronic equipment: Part 2 type 2 |
Dimensions |
Decided by Council |
|
10 |
IS 11162 : Part 3 : 1985 |
Dimensionsof non - Insulated terminal tags for electronic equipment: Part 3 type 3 |
Dimensions |
Decided by Council |
|
11 |
IS 11162 : Part 4 : 1985 |
Dimensions of non - Insulated terminal tags for electronic equipment: Part 4 type 4 |
Dimensions |
Decided by Council |
|
12 |
IS 11162 : Part 5 : 1985 |
Dimensions of non - Insulated terminal tags for electronic equipment: Part 5 type 5 |
Dimensions |
Decided by Council |
|
13 |
IS 11162 : Part 6 : 1985 |
Dimensions of non - Insulated terminal tags for electronic equipment: Part 6 type 6 |
Dimensions |
Decided by Council |
|
14 |
IS 11162 : Part 7 : 1985 |
Dimensions of non - Insulated terminal tags for electronic equipment: Part 7 type 7 |
Dimensions |
Decided by Council |
|
15 |
IS 11162 : Part 8 : 1985 |
Dimensions of non - Insulated terminal tags for electronic equipment: Part 8 type 8 |
Dimensions |
Decided by Council |
|
16 |
IS 11719 : Part 1 : Sec 1 : 1986 |
Dimensions of mechanical structures of the 482.6 mm series: Part 1 cabinets and pitches of rack structures: Sec 1 cabinets |
Dimensions |
IS 60297-3-100 : 2008 |
|
17 |
IS 11719 : Part 1 : Sec 2 : 1986 |
Dimensions of mechanical structures of the 482.6 mm series: Part 1 cabinets and pitches of rack structures: Sec 2 pitches of rack structures |
Dimensions |
IS/IEC 60297-3-100 : 2008 |
|
18 |
IS 11719 : Part 2 : Sec 1 : 1986 |
Dimensions of mechanical structures of the 482.6 mm series: Part 2 subracks and associated plug - In - Units: Sec 1 subracks |
Dimensions |
IS/IEC 60297-3-101 :2004 |
|
19 |
IS 11719 : Part 2 : Sec 2 : 1986 |
Dimensions of mechanical structures of the 482.6 mm series: Part 2 subracks and associated plug - In units: Sec 2 plug - In units |
Dimensions |
IS/IEC 60297-3-101 : 2004 |
|
20 |
IS 11777 : Part 1 : 1986 |
Specification for circular connectors for radio and associated sound equipment for frequencies below 3 mhz including DC: Part 1 test schedule and requirements |
Methods of tests |
IS/IEC 60130-9 : 2011 |
|
21 |
IS 11777 : Part 2 : 1986 |
Specification for circular connectors for radio and associated sound equipment for frequencies below 3 MHz including DC: Part 2 free three - Pin connector for microphone type 11777 IS - 01 |
Product Specification |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
22 |
IS 11777 : Part 3 : 1986 |
Specification for circular connectors for radio and associated sound equipment for frequencies below 3mhz including DC: Part 3 fixed three - Socket connector for sound equipment type 11777 IS - 02 |
Product Specification |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
23 |
IS 11777 : Part 4 : 1986 |
Specification for circular connectors for radio and associated sound equipment for frequencies below 3 mhz including DC: Part 4 free f4e - Pin connector for record player and tape recorder type, 11777 IS - 03 |
Product Specification |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
24 |
IS 11777 : Part 5 : 1986 |
Specification for circular connectors for radio and associated sound equipment for frequencies below 3 MHz including DC: Part 5 fixed f4e - Socket connector for record player and tape recorder type 11777 IS - 04 |
Product Specification |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
25 |
IS 11777 : Part 6 : 1987 |
Specification for circular connectors for radio and associated sound equipment for frequencies below 3 MHz including DC: Part 6 free seven - Pin connector for stereo tape player with car radio type 11777 IS - 05 |
Product Specification |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
26 |
IS 11777 : Part 7 : 1987 |
Specification for circular connectors for radio and associated sound equipment for frequencies below 3 MHz including DC: Part 7 fixed seven - Socket connector for stereo tape player with car radio type 11777 IS - 06 |
Product Specification |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
27 |
IS 11777 : Part 8 : 1987 |
Specification for circular connectors for radio and associated sound equipment for frequencies below 3 MHz including DC: Part 8 free seven pin connector for microphone with remote control, type 11777 IS - 07 |
Product Specification |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
28 |
IS 11777 : Part 9 : 1987 |
Specification for circular connectors for radio and associated sound equipment for frequencies below 3 MHz including ,DC: Part 9 fixed seven - Socket connector for microphone with remote control type 11777 IS - 08 |
Product Specification |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
29 |
IS 11777 : Part 10 : 1987 |
Specification for circular connectors for radio and associated sound equipment for frequencies below 3 MHz including DC: Part 10 free six - Pin connector for various applications type 11777 IS - 09 |
Product Specification |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
30 |
IS 11777 : Part 11 : 1987 |
Specification for circular connectors for radio and associated sound equipment for frequencies below 3 MHz including DC: Part 11 fixed six - Socket connector for various applications type 11777 lS - 10 |
Product Specification |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
31 |
IS 11777 : Part 12 : 1987 |
Specification fod circular connectors for radio and associated sound equipment for frequencies below 3 MHz including DC: Part 12 free six - Socket connector for various applications, type 11777 IS - 11 |
Product Specification |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
32 |
IS 11777 : Part 13 : 1987 |
Specification for circular connectors for radio and associated sound equipment for frequencies - Below 3 MHz including DC: Part 13 fixed six - Pin connector for various applicatio - Ns, type 11777 IS - 12 |
Product Specification |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
33 |
IS 11777 : Part 14 : 1987 |
Specification for circular connectors for radio and associated sound equipment for frequencies below 3 MHz including DC: Part 14 free eight - Pin connector for microphone and other various applications, type 11777 IS - 13 |
Product Specification |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
34 |
IS 11777 : Part 15 : 1987 |
Specification for circular connectors for radio and associated sound equipment for frequencies below 3 MHz including DC: Part 15 fixed eight - Socket connector for microphone and other applications, type 11777 IS - 14 |
Product Specification |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
35 |
IS 11778 : Part 1 : 1987 |
Specification for low frequency, threaded coupling, circular connectors: Part 1 test schedule and requirements |
Methods of tests |
Decided by council |
|
36 |
IS 11779 : Part 1 : 1987 |
Specification for low frequency, miniature, bayonet coupling circular connectors: Part 1 test schedule and requirements |
Others |
Decided by Council |
|
37 |
IS 11867 : 1987 |
Portable X Or Gamma Radiation Exposure Rate Meters And Monitors For Use In Radiological Protection |
------ |
------ |
|
38 |
IS 11885 : 1987 |
Multichannel Amplitude Analyzers |
------ |
------ |
|
39 |
IS 12195 : Part 1 : Sec 1 : 1987 |
Dimensions of sockets for relays used in electronic and telecommunication equipment: Part 1 sockets for armature relays: Sec 1: 8 pin socket |
Dimensions |
Decided by Council |
|
40 |
IS 12195 : Part 1 : Sec 2 : 1987 |
Dimensions of sockets for relays used in electronic and telecommunication equipment: Part 1 sockets for armature relays: Sec 2 11 pin socket |
Dimensions |
DECIDED BY COUNCIL |
|
41 |
IS 12420 : Part 2 : 1988 |
Specification for circular audio connectors: Part 2 socket, f4e contacts, nonrigid type 12420 IS - 01 |
Others |
Decided by council |
|
42 |
IS 12420 : Part 3 : 1988 |
Specification for circular audio connectors: Part 3 plug, f4e contacts, nonrigid type 12420 IS - 02 |
Others |
Decided by council |
|
43 |
IS 12420 : Part 4 : 1988 |
Specification for circular audio connectors: Part 4 plug, f4e contacts rigid type 12420 IS - 03 |
Others |
Decided by council |
|
44 |
IS 12420 : Part 5 : 1988 |
Specification for circular audio connectors: Part 5 plug, ten contacts, rigid type 12420 IS - 04 |
Others |
Decided by council |
|
45 |
IS 12420 : Part 6 : 1988 |
Specification for circular audio connectors: Part 6 plug, ten contacts, nonrigid type 12420 IS - 05 |
Others |
Decided by council |
|
46 |
IS 12420 : Part 7 : 1988 |
Specification for circular audio connectors: Part 7 socket, ten contacts, nonrigid type 12420 IS - 06 |
Others |
Decided by council |
|
47 |
IS 12420 : Part 8 : 1988 |
Specification for circular audio connectors: Part 8 plug, ten contacts, rigid type 12420 IS - 07 |
Others |
Decided by council |
|
48 |
IS 12448 : Part 1 : 1988 |
Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 1 general |
Methods of tests |
decided by council |
|
49 |
IS 12448 : Part 2 : Sec 2 : 1988 |
Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 2 general examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests: Sec 2 electrical continuity and contact resistance tests |
Methods of tests |
decided by council |
|
50 |
IS 12448 : Part 2 : Sec 3 : 1988 |
Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 2 general examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests: Sec 3 insulation tests |
Methods of tests |
decided by council |
|
51 |
IS 12448 : Part 2 : Sec 4 : 1988 |
Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 2 general examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests: Sec 4 voltage stress tests |
Methods of tests |
decided by council |
|
52 |
IS 12448 : Part 3 : 1989 |
Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 3 current - Carrying capacity tests |
Methods of tests |
Decided by Council |
|
53 |
IS 12448 : Part 4 : 1989 |
Basic testing procedures and measuring methods for Electromechanical components for electronic equipment: Part 4 dynamic stress tests |
Methods of tests |
Decided by Council |
|
54 |
IS 12448 : Part 6 : 1991 |
Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 6 climatic tests and soldering tests |
Methods of tests |
Decided by Council |
|
55 |
IS 12448 : Part 7 : 1990 |
Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 7 mechanical operating tests and sealing tests |
Methods of tests |
Decided by Council |
|
56 |
IS 12448 : Part 8 : 1992 |
Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 8 connector tests (Mechanical) and mechanical tests on contacts and terminations |
Methods of tests |
Decided by Council |
|
57 |
IS 1885 : Part 40 : 1974 |
Electrotechnical vocabulary: Part 40 connectors |
Terminology |
Decide by Council |
|
58 |
IS 1885 : Part 67 : 1988 |
Electrotechnical vocabulary Part 67 mechanical structures for electronic equipment |
Terminology |
IS/IEC 6917-1 : 2019 |
|
59 |
IS 2612 : 1965 |
Recommendation for type approval and sampling procedures for electronic components |
------ |
IS 10673 |
|
60 |
IS 2628 : Part 1 : 1964 |
Specification for rotary wafer switches (Low Current Rating): Part 1 tests and general requirements |
Methods of tests |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
61 |
IS 2628 : Part 2 : 1967 |
Specification for rotary wafer switches (Low Current Rating): Part 2 rotary wafer switches with central mounting |
Methods of tests |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
62 |
IS 2926 : 1964 |
Dimensions of connectors for radio batteries |
Dimensions |
Decided by council |
|
63 |
IS 3452 : Part 1 : 1966 |
Toggle Switches - Part I : General Requirements and Tests |
Product Specification |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
64 |
IS 3452 : Part 2 : 1970 |
Specification for toggle switches: Part 2 toggle switches, type i and type ii |
Product Specification |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
65 |
IS 3826 : Part 2 : 1970 |
Specification for connectors for frequencies below 3 MHz: Part 2 battery connectors for electronic equipment |
Terminology |
Decided by counil |
|
66 |
IS 4007 : Part 1 : 1982 |
Specification for terminals for electronic equipment: Part 1 general requirements and tests (First Revision) |
Dimensions |
decided by council |
|
67 |
IS 4007 : Part 2 : Sec 1 : 1983 |
Specification for terminals for electronic equipment: Part 2 detail specification for terminals: Sec 1 terminal, insulated, with insulated captive screw cap, type TSC 1 |
Dimensions |
Decided by council |
|
68 |
IS 4007 : Part 2 : Sec 2 : 1983 |
Specification for terminals for electronic equipment: Part 2 details specification for terminals: Sec 2 terminal non - Insulated, with insulated captive screw cap, type TSC 2 |
Dimensions |
Decided by Council |
|
69 |
IS 4007 : Part 2 : Sec 3 : 1983 |
Specification for terminals for electronic equipment: Part 2 detail specification for terminals: Sec 3 terminal, non - Insulated, with insulated captive screw cap, type TSC 3 |
Dimensions |
Decided by council |
|
70 |
IS 4007 : Part 2 : Sec 4 : 1983 |
Specification for terminals for electronic equipment: Part 2 detail specification for terminals: Sec 4 terminal, insulated, with insulated captive screw cap, type TSC 4 |
Dimensions |
Decided by council |
|
71 |
IS 4007 : Part 2 : Sec 5 : 1983 |
Specification for terminals for electronic equipment: Part 2 detail specification for terminals: Sec 5 terminals, insulated, side slotted with insulated captive screw cap: type TSC 5 |
Dimensions |
Decided by council |
|
72 |
IS 4007 : Part 2 : Sec 6 : 1983 |
Specification for terminals for electronic equipment: Part 2 detail specification for terminals: Sec 6 terminal, non - Insulated, with insulated captive spring cap, tapped hole panel mounting, type tsl 1 |
Dimensions |
decided by council |
|
73 |
IS 4007 : Part 2 : Sec 7 : 1983 |
Specification for terminals for electronic equipment: Part 2 detail specification for terminals: Sec 7 terminal, non - Insulated, with insulated captive spring cap, type tsl 2 |
Dimensions |
Decided by council |
|
74 |
IS 4007 : Part 2 : Sec 8 : 1983 |
Specification for terminals for electronic equipment: Part 2 detail specification for terminals: Sec 8 terminal, insulated, with insulated captive spring cap, type TSL 3 |
Dimensions |
Decided by council |
|
75 |
IS 4007 : Part 2 : Sec 9 : 1983 |
Specification for terminals for electronic equipment: Part 2 detail specification for terminals: Sec 9 terminal, insulated, with insulated captive spring cap, type TSL 4 |
Dimensions |
Decided by council |
|
76 |
IS 4007 : Part 2 : Sec 10 : 1983 |
Specification for terminals for electronic equipment: Part 2 detail specification for terminals: Sec 10 terminal, insulated, with insulated captive spring cap, type TSL 6 |
Dimensions |
Decided by council |
|
77 |
IS 4586 : Part 1 : Sec 1 : 1987 |
Dimensions of spindles and mounting arrangements for spindle operated electronic components: Part 1 spindles: Sec 1 general and definitions (Second Revision) |
Dimensions |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
78 |
IS 4586 : Part 1 : Sec 2 : 1987 |
Dimensions of spindles and mounting arrangements for spindle operated electronic components: Part 1 spindle: Sec 2 plain round spindle (Second Revision) |
Dimensions |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
79 |
IS 4586 : Part 1 : Sec 3 : 1987 |
Dimensions of spindles and mounting arrangements for spindle operated electronic components: Part 1 spindles: Sec 3 flatted spindles (Second Revision) |
Dimensions |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
80 |
IS 4586 : Part 1 : Sec 4 : 1987 |
Dimensions of spindles and mounting arrangements for spindle operated electronic components: Part 1 spindles: Sec 4 slotted spindles (Second Revision) |
Dimensions |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
81 |
IS 4586 : Part 1 : Sec 5 : 1987 |
Dimensions of spindles and mounting arrangements for spindle operated electronic components: Part 1 spindles: Sec 5 hollow spindles (Second Revision) |
Dimensions |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
82 |
IS 4586 : Part 1 : Sec 6 : 1987 |
Dimensions of spindles and mounting arrangements for spindle operated electronic components: Part 1 spindles: Sec 6 coupling spindle (Second Revision) |
Dimensions |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
83 |
IS 4586 : Part 1 : Sec 7 : 1987 |
Dimensions of spindles and mounting arrangements for spindle operated electronic components: Part 1 spindles: Sec 7 concentric spindle (Second Revision) |
Dimensions |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
84 |
IS 4586 : Part 1 : Sec 8 : 1987 |
Dimensions of spindles and mounting arrangements for spindle operated electronic components: Part 1 spindles: Sec 8 double flatted spindle (Second Revision) |
Dimensions |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
85 |
IS 4586 : Part 1 : Sec 9 : 1987 |
Dimensions of spindles and mounting arrangements for spindle operated electronic components: Part 1 spindles: Sec 9 knurled spindle (Second Revision) |
Dimensions |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
86 |
IS 4586 : Part 1 : Sec 10 : 1978 |
Dimensions of spindles and mounting arrangements for spindle operated electronic components: Part 1 spindles: Sec 10 slotted and knurled spindle (First Revision) |
Dimensions |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
87 |
IS 4586 : Part 2 : Sec 1 : 1980 |
Dimensions of spindles and mounting arrangements for spindle operated electronic components: Part 2 mounting arrangements: Sec 1 components and panels cut - Outs (First Revision) |
Dimensions |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
88 |
IS 4586 : Part 2 : Sec 2 : 1980 |
Dimensions of spindle and mounting arrangements for spindle operated electronic components: Part 2 mounting arrangements: Sec 2 fixing nuts (First Revision) |
Dimensions |
IS/IEC 60915 : 2006 |
|
89 |
IS 4794 : Part 1 : 1968 |
Specification for push - Button switches: Part 1 general requirements and tests |
Product Specification |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
90 |
IS 4794 : Part 2 : 1986 |
Specification for push - Button switches: Part 2 push - Button switches, type 1 (Incorporating Amendment No. 1) |
Others |
Decided by council |
|
91 |
IS 4795 : Part 1 : 2009 |
Holders for indicator lamps for electronic and telecommunication equipment - Specificaiton: Part 1 general requirements and tests (First Revision) |
Others |
Decided by council |
|
92 |
IS 4795 : Part 2 : 1978 |
Specification for holders for indicator lamps for electronic and telecommunication equipment: Part 2 type E10, E14 and BA9 |
Others |
Decided by council |
|
93 |
IS 5033 : 1969 |
Specification for telescopic aerials for portable radio receivers |
Code of Practice |
Decided by council |
|
94 |
IS 5051 : Part 1 : 1982 |
Specification for relays for electronics and telecommunication equipment: Part 1 general requirements and tests (First Revision) |
Others |
decided by council |
|
95 |
IS 5051 : Part 2 : Sec 1 to 3 : 1982 |
Specification for relays for electronics and telecommunication equipment: Part 2 reed relays |
Others |
Decided by council |
|
96 |
IS 5051 : Part 3 : Sec 1 : 1985 |
Specification for relays for electronics and telecommunication equipment: Part 3 armature, relays, non - Sealed: Sec 1 type RA 1 |
Others |
Decided by council |
|
97 |
IS 6089 : Part 1 : 1971 |
Specification for sensit4e switches: Part 1 general requirements and tests |
Product Specification |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
98 |
IS 6089 : Part 2 : 1985 |
Specification for sensitive switches: Part 2 SPDT unsealed, type 1 |
Others |
Decided by council |
|
99 |
IS 6102 : Part 1 : 2009 |
Finger knobs used in electronic and telecommunication equipment - Specificaiton: Part 1 general requirements and tests (First Revision) |
Others |
Decided by council |
|
100 |
IS 7751 : Part 1 : 1975 |
Specification for slide switches: Part 1 general requirements and tests |
Others |
Decided by Council |
|
101 |
IS 7751 : Part 2 : 1985 |
Specification for slide switches: Part 2 slide switches, type 1 |
Others |
Decided by Council |
|
102 |
IS 9000 : Part 25 : 1980 |
Basic environmental testing procedures for electronic and electrical items: Part 25 hydrogen sulphide test for contacts and connections |
Methods of tests |
IS/IEC 60068-2 -43 : 2003 |
|
103 |
IS 9000 : Part 26 : 1980 |
Basic environmental testing procedures for electronic & electrical items: Part 26 sulphur dioxide test for contacts and connections |
Methods of tests |
IS/IEC 60068-2-42 : 2003 |
|
104 |
IS 9001 : Part 6 : 1980 |
Guidance for environmental testing: Part 6 hydrogen sulphide test for contacts and connections |
Code of Practice |
IS/IEC 60098 -2-43 : 2003 |
|
105 |
IS 9001 : Part 7 : 1980 |
Guidance for environmental testing: Part 7 sulphur dioxide test for contacts and connections |
Methods of tests |
IS/IEC 60068-2-42 : 2003 |
|
106 |
IS/QC 960000 : 1995 |
Electromechanical switches for use in electronic equipment - Part 1: generic specification |
Code of Practice |
Decided by council |
|
107 |
IS/QC 960100 : 2000 |
Electromechanical switches for use in electronic equipment - Part 2: Secal specification for rotary switches |
Dimensions |
decided by council |
|
108 |
IS/QC 960101 : 2000 |
Electromechanical switches for use in electronic equipment - Part 2: Secal specification for rotary switches: Sec 1 blank detail specification |
Dimensions |
decided by council |
|
109 |
IS/QC 960201 : 2007 |
Electromechanical switches for use in electronic equipment : Part 4 Sectional specification for lever (toggle) switches , Section 1 Blank detail specification |
Code of Practice |
decided by council |
|
110 |
IS/QC 960300 : 1999 |
Electromechanical switches for use in electronic equipment: Part 6 Secal specification for sensit4e switches |
Dimensions |
decided by council |
|
111 |
IS/QC 960301 : 1999 |
Electromechanical switches for use in electronic equipment: Part 6 Secal specification for sensitive switches: Sec 2 detail specification for one pole, unsealed subminiature sensitive switches, 250 v maximum, 5 a maximum electrical rating |
Dimensions |
decided by council |
|
112 |
IS/QC 960400 : 1999 |
Electromechanical switches for use in electronic equipment: Part 5 Secal specification for pushbutton switches |
Code of Practice |
decided by council |
|
113 |
IS/QC 960500 : 1999 |
Electromechanical switches for use in electronic equipment: Part 3 Secal specification for in - Line package switches |
Code of Practice |
decided by council |
|
114 |
IS/QC 960501 : Part 3 : Sec 1 : 2007 |
Electromechanical switches for use in electronic equipment: Part 3 Secal specification for in - Line package switches: Sec 1 blank detail sdopecification |
Code of Practice |
decided by council |
|
115 |
IS 9606 : 1980 |
Dimensions of panels and racks (482.6 Mm System) |
Dimensions |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
116 |
IS 9647 : 1986 |
General requirements and methods of tests for low frequency connectors below 3 mhz including dc (First Revision) |
Methods of tests |
DECIDED BY DIVISIONAL COUNCIL - 17 OCT 2016 |
|
117 |
IS 9891 : Part 1 : 1981 |
Specification for edge connectors for printed wiring board and insulated board having a contact pitch of 2.54 mm: Part 1 test schedule and requirements |
Others |
Decided by council |
|
118 |
IS 9891 : Part 2 : 1981 |
Specification for edge connectors for printed wiring board and insulated board having contact pitch 2.54 mm: Part 2 non - Polarised plug types 9891 IS - 01-11/25/33 - W - A - 0.75 |
Others |
Decided by council |
|
119 |
IS 9891 : Part 3 : 1981 |
Specification for edge connectors for printed wiring board and insulated board having contact pitch 2.54 mm: Part 3 non - Polarised plug types 9891 IS - 02 - 11/25/33 - L - A - 0.75 |
Others |
Decided by council |
|
120 |
IS 9891 : Part 4 : 1981 |
Specification for edge connectors for 1 printed wiring board and insulated board having contact pitch 2.54 mm: Part 4 non - Polarised socket types 9891 IS - 03 - 11/25/33 - W/1 - A/b - 0.75 |
Others |
Decided by council |
