|
1 |
IS 11027 : 1984 |
Definitions of Tolerances for Rolling Bearings |
Terminology |
IS 11027 (Part 1) : 2019 |
|
2 |
IS 11145 : 2002 |
Plain bearings - Thin - Walled half - Bearings - Checking of peripheral length (First Revision) |
Code of Practice |
IS 4773 (Part 3) : 2021 |
|
3 |
IS 11904 : 1999 |
Rolling bearings - Radial bearings with locating snap ring - Dimensions and tolerances - Specification (First Revision) |
Product Specification |
IS 11904:2023 |
|
4 |
IS/ISO 12297 : 2012 |
Rolling Bearings — Steel Cylindrical Rollers — Dimensions and Tolerances |
Dimensions |
IS/ISO 12297-1 : 2021 |
|
5 |
IS 13406 : 2018 |
Rolling bearings - Radial ball bearings with flanged outer ring - Flange dimensions (First Revision) |
Dimensions |
IS 13406 : 2024 |
|
6 |
IS 14691 : 1999 |
Rolling bearings - Taper rolling bearings - Tapered roller - Metric series - Specification |
Product Specification |
Decided by council |
|
7 |
IS 14803 : Part 1 : 2000 |
Plain bearings: Part 1 fits |
Methods of tests |
------ |
|
8 |
IS 14803 : Part 2 : 2000 |
Part 2 tolerances on form and position and surface - Roughness for shafts, flanges and thrust collars |
Methods of tests |
IS 14803 (Part 2) : 2022/ISO 12129-2 : 2019 |
|
9 |
IS 15625 : 2005 |
Plain bearings - Lubrication holes, grooves and pockets - Dimensions, types, designation and their application to bearing bushes |
Dimensions |
------ |
|
10 |
IS 16478 : Part 2 : 2019 |
Plain bearing - Metallic multilayer plain bearings: Part 2 destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm |
Methods of tests |
IS 16478 (PART 2) : 2024 |
|
11 |
IS 16478 : Part 3 : 2016 |
Plain bearings - Metallic multilayer plain bearings: Part 3 non - Destructive penetrant testing |
Methods of tests |
IS 16478 (Part 3):2023 |
|
12 |
IS 17126 : 2019 |
Plain bearing: lead and tin casting alloys for multilayer plain bearing |
Code of Practice |
IS 17126 : 2024 |
|
13 |
IS 1859 : 1961 |
Threads Cutting Dies |
------ |
IS 12319 To 12325 |
|
14 |
IS 1988 : 1962 |
Screwing Taps |
------ |
IS 6171 To IS 6175 |
|
15 |
IS 2398 : 1967 |
Identification code for rolling bearings |
Code of Practice |
Decided by Council |
|
16 |
IS 2399 : 2019 |
Rolling bearings -- Vocabulary (Second Revision) |
Terminology |
IS 2399 : 2024 |
|
17 |
IS 2898 : 1976 |
Specification for steel balls for rolling bearings (First Revision) |
Product Specification |
IS 2898 (Part 1) : 2019 |
|
18 |
IS 3230 : 1970 |
Reccommendation for Tapping Drill Sizes |
------ |
IS 10952 |
|
19 |
IS 3824 : Part 1 : 1983 |
Methods of evaluating dynamic load ratings of rolling bearings Part 1 Radial ball bearings |
------ |
------ |
|
20 |
IS 3824 : Part 2 : 1983 |
Methods of evaluating dynamic load ratings of rolling bearings Part 2 Radial roller bearings |
------ |
------ |
|
21 |
IS 3824 : Part 3 : 1983 |
Methods of evaluating dynamic load ratings of rolling bearings Part 3 Thrust ball bearings |
------ |
------ |
|
22 |
IS 3824 : Part 4 : 1983 |
Methods of evaluating dynamic load ratings of rolling bearings Part 4 Thrust roller bearings |
------ |
------ |
|
23 |
IS 4025 : 2006 |
Rolling bearings -- Gauging practice (Second Revision) |
Code of Practice |
Decided by Council |
|
24 |
IS 4058 : 1967 |
Code of practice for fire safety of industrial buildings: viscose rayon yarn and/or staple fibre plants (First Revision) |
------ |
IS 3681 |
|
25 |
IS 4059 : 1967 |
Accuracy requirements for medium quality medium speed gears |
------ |
IS 3681 |
|
26 |
IS 4702 : 1968 |
Accuracy requirements for high precision gears |
------ |
IS 3681 |
|
27 |
IS 4725 : 1968 |
Accuracy Requirements For Precision Gears |
------ |
IS 3681 |
|
28 |
IS 4757 : 1980 |
Specification for wrapped bushes (First Revision) |
Dimensions |
IS 4757 (Part 1) : 2020 |
|
29 |
IS 4757 : Part 5 : 2020 |
Plain Bearings — Wrapped Bushes Part 5 Checking the Outside Diameter ( Second Revision ) |
Methods of tests |
IS 4757 (Part 5) : 2022/ISO 3547-5: 2020 |
|
30 |
IS 4757 : Part 6 : 2020 |
Plain Bearings — Wrapped Bushes Part 6 Checking the Inside Diameter ( Second Revision ) |
Methods of tests |
------ |
|
31 |
IS 4757 : Part 7 : 2020 |
Plain Bearings — Wrapped Bushes Part 7 Measurement of Wall Thickness of Thin-walled Bushes ( Second Revision ) |
Methods of tests |
------ |
|
32 |
IS 4773 : Part 3 : 2021 |
Plain bearing Thin-walled half bearings with or without flange Part 3: Measurement of peripheral length Adoption of ISO 3548-3 : 2012 Superseding IS 11145 : 1992 |
Service Specification |
------ |
|
33 |
IS 4774 : Part 1 : 1982 |
Specification for thin - Walled half bearing: Part 1 plain bearing (First Revision) |
Product Specification |
IS 4774 (Part 1):2023 |
|
34 |
IS 4774 : Part 2 : 1982 |
Specification for thin - Walled half bearings: Part 2 flanged bearing (First Revision) |
Methods of tests |
------ |
|
35 |
IS 5617 : 1970 |
Recconmendations for Tapping Drill Sizes for Fastening Pipe Threads |
------ |
IS 10952 |
|
36 |
IS 5692 : 2019 |
Rolling bearings -- Radial bearings -- Geometrical product specifications (GPS) and tolerance values (Second Revision) |
Dimensions |
IS 5692 : 2024 |
|
37 |
IS 5933 : 2019 |
Rolling bearings -- Thrust bearings -- Geometrical product specification (GPS) and tolerance values (Fourth Revision) |
Dimensions |
IS 5933 : 2024 |
|
38 |
IS 5935 : 1992 |
Radial internal clearances in unloaded radial rolling bearings (First Revision) |
Dimensions |
IS 5935 (Part 1) : 2019 |
|
39 |
IS 6172 : 1979 |
Hand Taps for Pipe Threads, Parallel |
------ |
IS 6175 : Part 7 |
|
40 |
IS 6174 : 1971 |
Nut Screwing Tap for ISO Metric Screw Threads, Coarse |
------ |
IS 6175 : Part 5 |
|
41 |
IS 6548 : 1992 |
Rolling bearings - Instrument precision bearings (First Revision) |
Product Specification |
IS 6548 : Part 1: 2016 |
|
42 |
IS 6548 : Part 1 : 2016 |
Rolling bearings - Instrument precision bearings: Part 1 boundary dimensions, tolerances and characteristics of metric series bearings (Second Revision) |
Code of Practice |
Decided by Council |
|
43 |
IS 6548 : Part 2 : 2015 |
Rolling bearings - Instrument precision bearings: Part 2 boundary dimensions, tolerances and characteristics of inch series bearings (Second Revision) |
Dimensions |
Decided by Council |
|
44 |
IS 6731 : 1977 |
Specification for locknuts, narrow series and lockwashers with straight inner tab for rolling bearings (First Revision) |
Product Specification |
Decided by Council |
|
45 |
IS 7460 : 1988 |
Tolerances for tapered roller bearings (First Revision) |
Dimensions |
IS 5692 : 2019 |
|
46 |
IS 7461 : 2019 |
General plan of - Boundary dimensions for tapered roller bearings: Part 1 single row bearings (Second Revision) |
Dimensions |
IS 7461 : 2024 |
|
47 |
IS 7461 : Part 1 : 1993 |
General plan of - Boundary dimensions for tapered roller bearings: Part 1 single row bearings (Second Revision) |
Dimensions |
IS 7461 : 2019 |
|
48 |
IS 7461 : Part 2 : 1992 |
Generalplanofboundarydimensions for tapered roller bearings: Part 2 double row bearings (Second Revision) |
Dimensions |
IS 7461 : 2019 |
|
49 |
IS 7461 : Part 3 : 1992 |
General plan of boundary dimensions for tapered roller bearings: Part 3 flanged cups (Second Revision) |
Dimensions |
IS 7461 : 2019 |
|
50 |
IS 7796 : 1975 |
Hand Taps for Pipe Threads, Taper |
------ |
IS 6175 : Part 8 |
|
51 |
IS 7821 : 1975 |
Long Shank Machine Taps with Nominal Diameters from M3 to M24 |
------ |
IS 6175 : Part 4 |
|
52 |
IS 8656 : 1977 |
Specification for tapered adapter sleeves for rolling bearings |
Product Specification |
Decided by council |
|
53 |
IS 8657 : 1977 |
Specification for tapered withdrawal sleeves for rolling bearings |
Product Specification |
Decided by council |
|
54 |
IS 9169 : 1979 |
Dimensions for Thread Cutting Elements for Hand Taps and Machine Taps-serial |
------ |
IS 6173 : Part 1 |
|
55 |
IS 9764 : Part 1 : 1992 |
Plain bearings - Washers for plain bearings and wrapped bushes - Specification: Part 1 ring type thrust washers (First Revision) |
Product Specification |
IS 9764 (Part 1) : 2022 |
|
56 |
IS 9764 : Part 2 : 1994 |
Plain bearings washers for plain bearings and wrapped bushes - Specification: Part 2 half thrust washers (First Revision) |
Product Specification |
IS 9764(Part 2):2022 |