|
1 |
IS 1002 : 1956 |
Multipurpose Grease, No. 1, No. 2 and No. 3 |
------ |
------ |
|
2 |
IS 10141 : 2001 |
Positive List of Constituents of Polyethylene in Contact with Foodstuffs, Pharmaceuticals and Drinking Water |
Others |
------ |
|
3 |
IS 10148 : 1982 |
Positive list of constituents of polyvinyl chloride (Pvc) and its copolymers in contact with foodstuffs, pharmaceuticals and drinking water |
Safety Standard |
------ |
|
4 |
IS 10350 : 1999 |
Powder Hair Dyes(bi-lingual) |
Product Specification |
------ |
|
5 |
IS 10356 : 1982 |
Automotive internal combustion engine lubricating oils from base stocks of mixed crude |
------ |
------ |
|
6 |
IS 10457 : 1983 |
Specification for n - Methyl - J - Acid |
Product Specification |
------ |
|
7 |
IS 10458 : 1983 |
Specification for di - J - Acid |
Product Specification |
------ |
|
8 |
IS 10655 : 1999 |
Rubber steam hose - Specification (First Revision) |
Product Specification |
------ |
|
9 |
IS 10733 : 1983 |
Specification for electrically bonded road and rail tanker hose of rubber, resistant to petroleum products |
Product Specification |
------ |
|
10 |
IS 1083 : 1978 |
Specification for industrial white oils (First Revision) |
Product Specification |
------ |
|
11 |
IS 1088 : 1987 |
Specification for lubricants for clock like mechanisms and precision instruments (Second Revison) |
Product Specification |
------ |
|
12 |
IS 10908 : 1991 |
Flexible Rubber Tubing for Liquefied Petroleum Gas |
Others |
------ |
|
13 |
IS 10909 : 2001 |
Positive List of Constituents of Polypropylene and its Copolymers in Contact with Foodstuffs, Pharaceuticals and Drinking Water |
Others |
------ |
|
14 |
IS 10999 : 1999 |
Kum kum powder - Specification (First Revision) |
Product Specification |
------ |
|
15 |
IS 11142 : 2019 |
Henna (Mehendi) powder - Specification (First Revision) |
Product Specification |
------ |
|
16 |
IS 11159 : Part 2 : 1989 |
Classification of lubricants industrial oils and related products: Part 2 family a (Total Loss Systems) |
Others |
------ |
|
17 |
IS 11159 : Part 3 : 1989 |
Classification of lubricants, industrial oils and related products: Part 3 family f (Spindle Bearings, Bearings And Associated Clutches) |
Others |
------ |
|
18 |
IS 11310 : 1985 |
Babul Gum |
------ |
------ |
|
19 |
IS 11355 : 1985 |
Specification for phenyl - P - Naphthylamine |
Product Specification |
------ |
|
20 |
IS 11375 : 1985 |
Specification for groundnut oil for cosmetic industry |
Product Specification |
------ |
|
21 |
IS 11376 : 1985 |
Specification for sesame oil for cosmetic industry |
Product Specification |
------ |
|
22 |
IS 11435 : 1985 |
Positive list of constituents of ionomer resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water |
Others |
------ |
|
23 |
IS 11486 : 1985 |
Specification for castor oil for cosmetic industry |
Product Specification |
------ |
|
24 |
IS 11488 : 1985 |
fuel oil for use in marine diesel engines |
Product Specification |
------ |
|
25 |
IS 1153 : 2000 |
Temporary corrosion preventives, hard film, solvent deposited - Specification (Second Revision) |
Product Specification |
------ |
|
26 |
IS 1154 : 2000 |
Temporary corrosion preventive fluid, soft film, solvent deposited, water displacing - Specification (First Revision) |
Product Specification |
------ |
|
27 |
IS 11637 : 1986 |
Specification for calcium base ep grease |
Product Specification |
------ |
|
28 |
IS 11659 : 1986 |
Specification for rubber hose for transferring anhydrous ammonia |
Product Specification |
------ |
|
29 |
IS 11705 : 1986 |
PositlVe list of constituents of ethylene/acrylic acid (Eaa) copolymers for their safe use in contact with foodstuffs, pharmaceuticals and drinking water |
Others |
------ |
|
30 |
IS 1177 : 1996 |
Oil of vetiver (Cultivated And Khus) - Specification (Second Revision) |
Product Specification |
------ |
|
31 |
IS 11856 : 1986 |
Adhesive Caulking Compound, Bitumen Based |
------ |
------ |
|
32 |
IS 1201 : 2004 |
Methods for testing tar and bituminous materials — Sampling of bituminous materials (Second Revision) |
Others |
------ |
|
33 |
IS 1202 : 1978 |
Determination of Specific Gravity - (see IS 1201 to IS 1220) |
Methods of tests |
------ |
|
34 |
IS 1203 : 1978 |
Determination of Penetration - (see IS 1201 To IS 1220) |
Methods of tests |
------ |
|
35 |
IS 1204 : 1978 |
Determination of Residue of Specified Penetration - (see IS 1201 to IS 1220) |
Methods of tests |
------ |
|
36 |
IS 1205 : 1978 |
Determination of Softening Point - (see IS 1201 to IS 1220) |
Methods of tests |
------ |
|
37 |
IS 1206 : Part 1 : 1978 |
Determination of viscosity: Part 1 Industrial viscosity - (SEE IS 1201 to IS 1220) |
Methods of tests |
------ |
|
38 |
IS 1206 : Part 2 : 1978 |
Determination of viscosity: Part 2 Absolute viscosity - (SEE IS 1201 to IS 1220) |
Methods of tests |
------ |
|
39 |
IS 1206 : Part 3 : 1978 |
Determination of viscosity: Part 3 Kinematic viscosity - (SEE IS 1201 to IS 1220) |
Methods of tests |
------ |
|
40 |
IS 1207 : 1978 |
Determination of Equiviscous Temperature (evt) - (see IS 1201 to IS 1220) |
Methods of tests |
------ |
|
41 |
IS 1208 : 1978 |
Determination Of Ductility - (SEE IS 1201 to IS 1220) |
Methods of tests |
------ |
|
42 |
IS 1209 : 1978 |
Determination of Flash Point and Fire Point - (SEE IS 1201 to IS 1220) |
Methods of tests |
------ |
|
43 |
IS 1210 : 1978 |
Float Test - (SEE IS 1201 to IS 1220) |
Methods of tests |
------ |
|
44 |
IS 1211 : 1978 |
Determination of Water Content (Dean and Stark Method) - (SEE IS 1201 to IS 1220) |
Methods of tests |
------ |
|
45 |
IS 1212 : 1978 |
Determination of Loss on Heating - (SEE IS 1201 to IS 1220) Determination of Loss on Heating - (SEE IS 1201 to IS 1220) |
Methods of tests |
------ |
|
46 |
IS 1213 : 1978 |
Distillation Test - (SEE IS 1201 to IS 1220) |
Methods of tests |
------ |
|
47 |
IS 1214 : 1978 |
Determination of Matter Insoluble in Benzene |
------ |
------ |
|
48 |
IS 1215 : 1978 |
Detemination of Matter Insolubel in Toluene - (SEE IS 1201 to IS 1220) |
Methods of tests |
------ |
|
49 |
IS 1216 : 1978 |
Detemination of Solubility in Carbon Disulphide Trichlorothylene - (SEE IS 1201 to IS 1220) |
Methods of tests |
------ |
|
50 |
IS 1217 : 1978 |
Determination of Mineral Matter (ASH) - (SEE IS 1201 to IS 1220) |
Methods of tests |
------ |
|
51 |
IS 1218 : 1978 |
Determination of Phenols - (SEE IS 1201 to IS 1220) |
Methods of tests |
------ |
|
52 |
IS 1219 : 1978 |
Determination of Naphthalene - (SEE IS 1201 to IS 1220) |
Methods of tests |
------ |
|
53 |
IS 1220 : 1978 |
Determination of Volatile Matter Content - (SEE IS 1201 to IS 1220) |
Methods of tests |
------ |
|
54 |
IS 12229 : 1987 |
Positive list of constituents of polyalkylene terephthalates (PET & PBT) for their safe use in contact with foodstuffs, pharmaceuticals and drinking water |
Others |
------ |
|
55 |
IS 12265 : 1987 |
Flexible packs for the packing of edible oils |
------ |
------ |
|
56 |
IS 1235 : 1988 |
Specification for acetic anhydride (First Revision |
Product Specification |
------ |
|
57 |
IS 12540 : 1988 |
Specification for acrylonitrile |
Product Specification |
------ |
|
58 |
IS 12618 : 1989 |
6 - Chloro - 2 - Aminophenol - 4 - Sulphonic acid, technical - Specification |
Product Specification |
------ |
|
59 |
IS 12628 : 1989 |
Dye intermediates - 2 - Amino - 4 - Nitrophenol, technical - Specification |
Product Specification |
------ |
|
60 |
IS 12656 : 2014 |
Rubber or plastics hoses and tubing - Bending tests (First Revision) |
Methods of tests |
------ |
|
61 |
IS 12657 : 2014 |
Rubber and plastics hoses - Subambient temperature flexibility tests (First Revision) |
Methods of tests |
------ |
|
62 |
IS 1272 : 1958 |
Coal Tar Solvent Naphtha, Light Grade 2 |
------ |
------ |
|
63 |
IS 1276 : 1958 |
Grease, S. No. 2 |
------ |
------ |
|
64 |
IS 1277 : 1987 |
Gear Lubricant, Regular |
------ |
------ |
|
65 |
IS 12814 : 1989 |
Method of analysis of hydraulic cement by atomic absorption spectrophotometer |
------ |
------ |
|
66 |
IS 12891 : 1990 |
Determination of fusibility of ash of coal, coke and lignite |
Methods of tests |
------ |
|
67 |
IS 13055 : 1991 |
Methods of sampling and test for anaerobic adhesives and sealants |
Methods of tests |
------ |
|
68 |
IS 13289 : 1993 |
Polypropylene/impact copolymer (Ppcp) crates for milk satchets - Specification |
Product Specification |
------ |
|
69 |
IS 13360 : Part 2 : Sec 4 : 1999 |
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens section 4 preparation of test specimens by machining (First Revision) |
Methods of tests |
------ |
|
70 |
IS 13360 : Part 2 : Sec 7 : 2016 |
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens section 7 injection moulding of test specimens of thermoplastic materials - Small plates (Second Revision) |
Methods of tests |
------ |
|
71 |
IS 13360 : Part 2 : Sec 9 : 2000 |
Plastics - Methods of testing: Part 2 sampllNg and preparatlOn oftest specimens section 9 injection moulding of test specimens of thermoplastic materials - Small tensile bars |
Methods of tests |
------ |
|
72 |
IS 13360 : Part 3 : Sec 1 : 1995 |
Plastics - Methods of Testing - Part 3 : Physical and Dimensional Properties - Section 1 : Determination of Density and Relative Density of Non-Cellular Plastics |
Methods of tests |
------ |
|
73 |
IS 13360 : Part 3 : Sec 10 : 2016 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 10 determination of density of non - Cellular plastics - Immersion method, liquid pyknometer method and titration method |
Methods of tests |
------ |
|
74 |
IS 13360 : Part 3 : Sec 11 : 2016 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 11 determination of density of non - Cellular plastics - Density gradient column method |
Methods of tests |
------ |
|
75 |
IS 13360 : Part 4 : Sec 5 : 2000 |
Plastics - Methods of testing: Part 4 rheological properties section 5 determination of the fluidity of plastics using capillary and slit - Die rheometers |
Methods of tests |
------ |
|
76 |
IS 13360 : Part 5 : Sec 1 : 2018 |
Plastics - Methods of testing: Part 5 mechanical properties section 1 determination of tensile properties - General requirements (First Revision) |
Methods of tests |
------ |
|
77 |
IS 13360 : Part 5 : Sec 3 : 2018 |
Plastics - Methods of testing: Part 5 mechanical properties section 3 determination of tensile properties - Test conditions for films and sheets (First Revision) |
Methods of tests |
------ |
|
78 |
IS 13360 : Part 5 : Sec 4 : 2013 |
Plastics - Methods of testing: Part 5 mechanical properties section 4 determination of izod impact strength (First Revision) |
Methods of tests |
------ |
|
79 |
IS 13360 : Part 5 : Sec 7 : 2017 |
Plastics - Methods of testing: Part 5 mechanical properties section 7 determination of flexural properties (First Revision) |
Methods of tests |
------ |
|
80 |
IS 13360 : Part 5 : Sec 26 : 2018 |
Plastics - Methods of testing: Part 5 mechanical properties section 26 determination of tensile properties - Test conditions for unidirectional fibre - Reinforced plastic composites (First Revision) |
Methods of tests |
------ |
|
81 |
IS 13360 : Part 6 : Sec 3 : 2017 |
Plastics - Methods of testing: Part 6 thermal properties section 3 determination of temperature of deflection under load - General test method (Second Revision) |
Methods of tests |
------ |
|
82 |
IS 13360 : Part 6 : Sec 4 : 1997 |
Plastics - Methods of Testing Part 6 Thermal properties Sec 4 Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source |
Methods of tests |
------ |
|
83 |
IS 13360 : Part 6 : Sec 5 : 2001 |
Plastics - Methods of Testing - Part 6 : Thermal Properties - Section 5 : Determination of Flammability of Plastic Materials for Parts and Devices in Appliances |
Methods of tests |
------ |
|
84 |
IS 13360 : Part 6 : Sec 24 : 2018 |
Plastic - Method of testing: Part 6 thermal properties section 24 cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame of cellular plastic |
Methods of tests |
------ |
|
85 |
IS 13360 : Part 7 : Sec 1 : 1996 |
Plastics - Methods of testing: Part 7 electrical properties section 1 measurament of resistivity of conductive plastics |
Methods of tests |
------ |
|
86 |
IS 13360 : Part 8 : Sec 1 : 1997 |
Plastics - Methods of testing: Part 8 permanence/chemical properties section 1 determination of water absorption |
Methods of tests |
------ |
|
87 |
IS 13360 : Part 8 : Sec 2 : 2004 |
Plastics - Methods of Testing - Part 8 : Permanence/Chemical Properties - Section 2 : Polymer Dispersions and Rubber Latices - Determination of Ph |
Methods of tests |
------ |
|
88 |
IS 13360 : Part 8 : Sec 8 : 2018 |
Plastics - Methods of testing: Part 8 permanence/chemical properties section 8 determination of ash - General methods (First Revision) |
Methods of tests |
------ |
|
89 |
IS 13360 : Part 8 : Sec 9 : 1997 |
PlastlCs - Methods of testing part8 permanencuchemical properties section 9 determination of resistance to environmental stress cracking (Esc) - Bent strip method |
Methods of tests |
------ |
|
90 |
IS 13360 : Part 8 : Sec 10 : 1999 |
Plastics - Methods of Testing - Part 8 : Permanence/Chemical Properties - Section 10 : Determination of Environmental Stress Cracking (ESC) - Ball or Pin Impression Method |
Methods of tests |
------ |
|
91 |
IS 13360 : Part 8 : Sec 13 : 2018 |
Plastics - Methods of testing: Part 8 performance / chemical properties section 13 determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources (First Revision) |
Methods of tests |
------ |
|
92 |
IS 13360 : Part 9 : Sec 4 : 1997 |
Plastics - Methods of Testing Part 9 Optical properties Sec 4 Qualitative evaluation of the bleeding of colorants |
Methods of tests |
------ |
|
93 |
IS 13360 : Part 9 : Sec 7 : 2001 |
Plastics - Methods of testing: Part 9 optical properties section 7 determination of specular gloss of plastic films and solid plastics |
Methods of tests |
------ |
|
94 |
IS 13360 : Part 9 : Sec 8 : 2001 |
Plastics - Methods of testing: Part 9 optical properties section 8 determination of transparency of plastic sheeting |
Methods of tests |
------ |
|
95 |
IS 13360 : Part 11 : Sec 3 : 2000 |
Plastics - Methods of testing: Part 11 special properties section 3 film and sheeting - Determination of blocking resistance |
Methods of tests |
------ |
|
96 |
IS 13360 : Part 11 : Sec 9 : 2018 |
Plastics ? methods of testing: Part 11 special properties section 9 determination of the viscosity of polymers in dilute solution using capillary viscometers - General principles (First Revision) |
Methods of tests |
------ |
|
97 |
IS 13360 : Part 11 : Sec 10 : 1999 |
Plastics - Methods of tmEsting: Part 11 special properties section 10 resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the brookfield test method |
Methods of tests |
------ |
|
98 |
IS 13360 : Part 11 : Sec 15 : 2006 |
Plastics - Methods of testing: Part 11 special properties section 15 determination of viscosity using a falling - Ball viscometer - Inclined - Tube method |
Methods of tests |
------ |
|
99 |
IS 13463 : 1992 |
Polyamide(Nylon 6) materials for moulding and extrusion specification |
Product Specification |
------ |
|
100 |
IS 1350 : Part 2 : 2017 |
Methods of test for coal and coke: Part 2 determination of gross calorific value by the bomb calorimetric method and calculation of Net Calorific Value (Second Revision) |
Methods of tests |
------ |
|
101 |
IS 1350 : Part 3 : 1969 |
Methods of test for coal and coke - Determination of Sulphur ( FIRST REVISION ) |
Methods of tests |
------ |
|
102 |
IS 1350 : Part 4 : Sec 1 : 1974 |
Methods of test for coal and coke: Part 4 ultimate analysis, section 1 determination of carbon and hydrogen (First Revision) |
Methods of tests |
------ |
|
103 |
IS 1351 : 1959 |
Methods of Test for Coal & Coke Ultimates Analysis |
------ |
------ |
|
104 |
IS 1352 : 1959 |
Methods of Test for Coal and Coke Ultimate Analysis |
------ |
------ |
|
105 |
IS 1354 : 1992 |
Methods of test for Coke - Special tests (Second Revision) |
Methods of tests |
------ |
|
106 |
IS 13582 : 1992 |
Agarbatti - T |
------ |
------ |
|
107 |
IS 13797 : 1993 |
Molybdenum disulphide dispersion in oil - Specification |
Product Specification |
------ |
|
108 |
IS 13810 : 1993 |
Code of practice for float and sink analysis of coal |
Code of Practice |
------ |
|
109 |
IS 13842 : 1993 |
m - Ureidoaniline, technical - Specification |
Product Specification |
------ |
|
110 |
IS 13867 : 1993 |
Rubber - Standard temperatures, humidities and times for the conditioning and time interval between vulcanization and testing of test pieces |
Methods of tests |
------ |
|
111 |
IS 1421 : 1964 |
Cellulose Nitrate Coated Fabrics |
------ |
------ |
|
112 |
IS 14234 : 1996 |
Lubricants for Two-stroke Spark Ignition Air-cooled Gasoline Engines |
Product Specification |
------ |
|
113 |
IS 1447 : 1966 |
Methods of Sampling of Petroleum and its Products |
------ |
------ |
|
114 |
IS 1447 : Part 1 : 2000 |
Petroleum and its products - Methods of sampling: Part 1 manual sampling (First Revision) |
Others |
------ |
|
115 |
IS 1447 : Part 3 : 1992 |
Methods of sampling of petroleum and its products : Part 3 method of sampling of semi - Solid and solid petroleum products (Second Revision) |
Others |
------ |
|
116 |
IS 1448 : Part 1 : 1971 |
Neutralization Number by Potentiometric Titration - Part I |
Methods of tests |
------ |
|
117 |
IS 1448 : Part 1 : Sec 1 : 2002 |
Methods of Test for Petroleum and its Products : Part 1 : Sec 1 : Determination of Acid Number of Petroleum Products by Potentiometric Titration |
Methods of tests |
------ |
|
118 |
IS 1448 : Part 4 : 1984 |
Methods of test for petroleum and its products [p:4] ash, sulphated ash and water soluble ash (Second Revision) |
Methods of tests |
------ |
|
119 |
IS 1448 : Part 4 : Sec 2 : 2016 |
Methods of test for petroleum and its products [p : 4/section 2] ash from grease, sulphated ash and water soluble ash (Third Revision) |
Methods of tests |
------ |
|
120 |
IS 1448 : Part 10 : 1970 |
Methods of test for petroleum and its products Part 10: Cloud point and pour point |
Methods of tests |
------ |
|
121 |
IS 1448 : PART 10 : SEC 1 : 2012 |
Methods of test for petroleum and its products [p : 10] cloud point and pour point section 1 determination of cloud point (Second Revision) |
Methods of tests |
------ |
|
122 |
IS 1448 : Part 10 : Sec 2 : 2013 |
Methods of test for petroleum and its products [p : 10] cloud point and pour point section 2 determination of pour point (Second Revision) |
Methods of tests |
------ |
|
123 |
IS 1448 : Part 13 : 1960 |
Methods of test for petroleum and its products [p:13] colour by lovibond tintometer |
Methods of tests |
------ |
|
124 |
IS 1448 : Part 17 : 1960 |
Methods of test for petroleum and its products: Part 17 Diesel index |
Methods of tests |
------ |
|
125 |
IS 1448 : Part 24 : 1971 |
Methods of Test for Petroleum and its Products - Part 24 : Kauri-Butanol Value |
Methods of tests |
------ |
|
126 |
IS 1448 : Part 25 : 1976 |
Methods of test for petroleum and its products [p:25] determination of kinematic and dynamic viscosity (First Revision) |
Methods of tests |
------ |
|
127 |
IS 1448 : Part 29 : 2004 |
Methods of Test for Petroleum and its Products - Part 29: Petroleum Products - Gum Content of Light and Middle Distillate Fuels - Jet Evaporation Method |
Methods of tests |
------ |
|
128 |
IS 1448 : Part 33 : 1991 |
Methods of test for petroleum and its products [p:33] sulphur by bomb method (Second Revision) |
Methods of tests |
------ |
|
129 |
IS 1448 : Part 35 : 1960 |
Methods of test for petroleum and its products : Part 35 - Sulphur by quartz tube method |
------ |
------ |
|
130 |
IS 1448 : Part 36 : 1960 |
Methods of test for petroleum and its products: Part 36 Sulphur mercaptans |
Methods of tests |
------ |
|
131 |
IS 1448 : Part 37 : 1967 |
Methods of test for petroleum and its products : Part 37 - Tetraethyl lead (TEL) by chlorate oxidation method |
------ |
------ |
|
132 |
IS 1448 : Part 38 : 1982 |
Methods of test for petroleum and its products: Part 38 Determination of lead antiknock compound in gasoline by gravimetric method |
------ |
------ |
|
133 |
IS 1448 : Part 45 : 1962 |
Methods of Test for Petroleum and its Products - Part 45 : Knock Characteristics of Aviation Fuels by the Aviation Method |
Methods of tests |
------ |
|
134 |
IS 1448 : Part 46 : 1962 |
Methods of test for petroleum and its products - Part 46 : knock characteristics of aviation fuels by the supercharge method |
Methods of tests |
------ |
|
135 |
IS 1448 : Part 47 : 1962 |
Methods of Test for Petroleum and its Products - Part 47 : Knock Characteristics of High Performance Fuels by Extended Motor Method |
Methods of tests |
------ |
|
136 |
IS 1448 : Part 48 : 1972 |
Methods of test for petroleum and its products : Part 48 - Olefins and aromatic content |
------ |
------ |
|
137 |
IS 1448 : Part 49 : 1962 |
Methods of test for petroleum and its products : Part 49 - Thermal stability of aviation turbine fuels |
------ |
------ |
|
138 |
IS 1448 : Part 50 : 1977 |
Methods of test for petroleum and its products [ p:50] chlorine in new and used lubricants (Sodium Alcoholate Method) (Second Reoision) |
Methods of tests |
------ |
|
139 |
IS 1448 : Part 51 : 1963 |
Methods of test for petroleum and its products [ p:51] copper strip corrosion test for lugricating greases |
Methods of tests |
------ |
|
140 |
IS 1448 : Part 55 : 2004 |
Methods of test for petroleum and its products: Part 55 Saponification value, saponifiable and unsaponifiable matter |
Methods of tests |
------ |
|
141 |
IS 1448 : Part 60 : 1994 |
Petroleum and its products methods of test [ p:60] consistency of lubricating greases by cone penetrometer (Second Revision) |
Methods of tests |
------ |
|
142 |
IS 1448 : Part 61 : 1974 |
Methods of test for petroleum and its products: evaporation loss in greases (2 - Hour Drying) [p:61] (First Revision) |
Methods of tests |
------ |
|
143 |
IS 1448 : Part 62 : 1974 |
Methods of test for petroleum and its products: heat stability of greases [k62] (First Revision) |
Methods of tests |
------ |
|
144 |
IS 1448 : Part 63 : 1967 |
Methods of test for petroleum and its products : Part 63 - Benzene and toluene by ultra-violet spectrophotometry |
------ |
------ |
|
145 |
IS 1448 : Part 64 : 1998 |
Methods of test for petroleum and its products [p : 64] nonvolatile matter in solvents (First Revision) |
Methods of tests |
------ |
|
146 |
IS 1448 : Part 68 : 1967 |
Methods of test for petroleum and its products - Part 68 : evaporation loss in greases (22 - Hour Drying) |
Methods of tests |
------ |
|
147 |
IS 1448 : Part 72 : 1968 |
Volatility of liquefied petroleum gases (P:72) |
Methods of tests |
------ |
|
148 |
IS 1448 : Part 74 : 1968 |
Dryness of liquefied petroleum gases [p:74] |
Methods of tests |
------ |
|
149 |
IS 1448 : Part 75 : 1968 |
Methods of test for petroleum and its products: Part 75 Odour of liquefied petroleum gases |
Methods of tests |
------ |
|
150 |
IS 1448 : Part 77 : 1971 |
Metallic Constituents of Lubricating Oils, Chemical Method - Part 77 |
------ |
------ |
|
151 |
IS 1448 : Part 78 : 1973 |
Methods of test for petroleum and its products: Part 78 Determination of trace elements in petroleum products -- Copper |
Methods of tests |
------ |
|
152 |
IS 1448 : Part 80 : 1973 |
Methods of test for petroleum and its products: Part 80 Determination of trace elements in Petroleum products -- Lead |
Methods of tests |
------ |
|
153 |
IS 1448 : Part 81 : 1973 |
Methods of test for petroleum and its products: determination of trace elements in petroleum products : total chlorine (Wickbold Oxy - Hydrogen Combustion Method) [p : 81] |
Methods of tests |
------ |
|
154 |
IS 1448 : Part 83 : 1974 |
Methods of test for petroleum and its products: Part 83 Determination sulphur by Wickbold oxyhydrogen method |
Methods of tests |
------ |
|
155 |
IS 1448 : Part 85 : 1976 |
Methods of test for petroleum and its products:: Part 85 oil separation on storage of greases |
Methods of tests |
------ |
|
156 |
IS 1448 : Part 86 : 1977 |
Methods of test for petroleum and its products (P:86) determination of total base number by potentiometric perchloric acid titration method |
Methods of tests |
------ |
|
157 |
IS 1448 : Part 88 : 1979 |
Methods of test for petroleum and its products : Part 88 - Engine test method for evaluation of detergency characteristics of internal combustion engine crankcase oils |
------ |
------ |
|
158 |
IS 1448 : Part 89 : 1979 |
Methods of test for petroleum and its products [p:89) test for thermal stability of lubricating greases |
Methods of tests |
------ |
|
159 |
IS 1448 : Part 92 : 2018 |
Methods of test for petroleum and its products [p : 92] determination of cone penetration of lubricating greases and petrolatum (First Revision) |
Methods of tests |
------ |
|
160 |
IS 1448 : Part 93 : 1979 |
Methods of test for petroleum and its products [p:93] needle penetration of petroleum waxes |
Methods of tests |
------ |
|
161 |
IS 1448 : Part 102 : 1981 |
Methods of test for petroleum and its products [p:102] determination of air release value |
Methods of tests |
------ |
|
162 |
IS 1448 : Part 108 : 1982 |
Methods of test for petroleum and its products: Part 108 Aparent viscosity of engine oil at low temperature using the cold-cranking simulator |
Methods of tests |
------ |
|
163 |
IS 1448 : Part 110 : 1981 |
Methods of test for petroleum and its products [ p : 110 ] cold filter plugging point of distillate fuels |
Methods of tests |
------ |
|
164 |
IS 1448 : Part 115 : 1984 |
Methods of test for petroleum and its products [p:115] determination of salt content in crude petroleum and its products |
Methods of tests |
------ |
|
165 |
IS 1448 : Part 117 : 1984 |
Methods of test for petroleum and its products : Part 117 - Determination of lead content in gasoline by volumetric chromate method |
------ |
------ |
|
166 |
IS 1448 : Part 120 : 1986 |
Methods of test for petroleum and its products (P: 120) zinc in lubricating oil |
Methods of tests |
------ |
|
167 |
IS 1448 : Part 121 : 1986 |
Methods of test for petroleum and its products:: Part 121 barium in lubricating oil additive concentrates |
Methods of tests |
------ |
|
168 |
IS 1448 : Part 124 : 1987 |
Methods of test for petroleum and its products:: Part 124 dilution of gasoline engine crankcase oils |
Methods of tests |
------ |
|
169 |
IS 1448 : Part 126 : 1988 |
Methods of test for petroleum and its products:: Part 126 determination of ash content in raw and calcined petroleum coke |
Methods of tests |
------ |
|
170 |
IS 1448 : Part 127 : 1988 |
Methods of test for petroleum and its products [p: 127 ] determination of iron in petroleum coke |
Methods of tests |
------ |
|
171 |
IS 1448 : Part 131 : 1988 |
Methods of test for petroleum and its products [p:131] determination of silicon in petroleum coke |
Methods of tests |
------ |
|
172 |
IS 1448 : Part 138 : 2018 |
Methods of test for petroleum and its products [ p : 138 ] determination of soap content (First Revision) |
Methods of tests |
------ |
|
173 |
IS 1448 : Part 139 : 1992 |
Methods of test for petroleum and its products [p : 139] determination of real density of calcined petroleum coke using butanol or toluene |
Methods of tests |
------ |
|
174 |
IS 1448 : Part 142 : 1993 |
Petroleumandits products methods of test [ p:142] determination of water separation characteristics of aviation turbine fuels by portable separometer |
Methods of tests |
------ |
|
175 |
IS 1448 : Part 143 : 1993 |
Methods of test for petroleum and its products [p:143] evaluation of white mineral oils by ultraviolet absorption |
Methods of tests |
------ |
|
176 |
IS 1448 : Part 145 : 1994 |
Methods of test for petroleum and its products [p:145] sodium, nickel and vanadium in fuel oils and crude oils by atomic absorption spectroscopy |
Methods of tests |
------ |
|
177 |
IS 1448 : Part 170 : 2018 |
Methods of test for petroleum and its products: Part 170 determination of the extreme - Pressure and anti - Wear properties of fluids - Four ball method (European Conditions) |
Methods of tests |
------ |
|
178 |
IS 14504 : 1998 |
Natural gas - Calculation of calorific values, density, relative density and wobbe index from composition |
Methods of tests |
------ |
|
179 |
IS 14507 : 1998 |
Diphenyl ether - Specification |
Product Specification |
------ |
|
180 |
IS 14534 : 2016 |
Plastics - Guidelines for the recovery and recycling of plastics waste (First Revision) |
Others |
------ |
|
181 |
IS 14611 : 1998 |
Multilayered cross laminated sheets and tarpaulins/covers |
Code of Practice |
------ |
|
182 |
IS 14625 : 1999 |
Plastics Feeding Bottles |
Others |
------ |
|
183 |
IS 14625 : 1999 |
Plastics Feeding Bottles (Bilingual) |
Product Specification |
------ |
|
184 |
IS 14635 : 1999 |
Polytetrafluoroethylene (Ptfe) materials for moulding and extrusion - Specification |
Product Specification |
------ |
|
185 |
IS 14794 : 2018 |
Isobutene - Isoprene rubber (Iir) - Evaluation procedures (Second Revision) |
Methods of tests |
------ |
|
186 |
IS/ISO 14851 : 1999 |
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer |
Methods of tests |
------ |
|
187 |
IS/ISO 14852 : 1999 |
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide |
Methods of tests |
------ |
|
188 |
IS/ISO 14855 : PART 2 : 2007 |
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide: Part 2 gravimetric measurement of carbon dioxide evolved in a laboratory - Scale test |
Methods of tests |
------ |
|
189 |
IS 14982 : 2001 |
Anti-Striping Agents (Amine Type) |
Code of Practice |
------ |
|
190 |
IS 14982 : 2017 |
Anti - Stripping agents for bitumen addition - Specification (First Revision) |
Product Specification |
------ |
|
191 |
IS 15030 : 2001 |
Terephthalic acid - Specification |
Product Specification |
------ |
|
192 |
IS 15076 : 2002 |
Chloroprene rubber (Cr) - General purpose types - Evaluation procedure |
Methods of tests |
------ |
|
193 |
IS 15080 : 2001 |
6 - Bromo - 2,4 - Dinitroaniline, technical - Specification |
Product Specification |
------ |
|
194 |
IS 15081 : 2001 |
N, n - Bishydroxyethyl meta - Chloroaniline, technical - Specification |
Product Specification |
------ |
|
195 |
IS 15082 : 2001 |
N, n - Bishydroxyethyl meta toluidine, technical - Specification |
Product Specification |
------ |
|
196 |
IS 15130 : Part 2 : 2007 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography: Part 2 measuring - System characteristics and statistics for processing of data |
Methods of tests |
------ |
|
197 |
IS 15130 : Part 3 : 2002 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography: Part 3 determination of hydrogen, helnavi, oxygen, nitrogen, carbon dkixide and hydrocarbons up to c8 using two packed columns |
Methods of tests |
------ |
|
198 |
IS 15130 : Part 5 : 2002 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography: Part 5 determination of nitrogen, carbon dioxide and cl to c - and c6+ hydrocarbons for a laboratory and on - Line process application using three columns |
Methods of tests |
------ |
|
199 |
IS 15134 : 2002 |
2 - Nitro - 4 - Methoxy aniline, technical - Specification |
Product Specification |
------ |
|
200 |
IS 15320 : 2003 |
Natural Gas - Designation of the Quality of Natural Gas for Use as a Compressed Fuel for Vehicles |
Others |
------ |
|
201 |
IS 15430 : 2003 |
Rubber seals - Joint rings used for gas supply pipes and fittings - Specification for material |
Product Specification |
------ |
|
202 |
IS 15439 : 2000 |
Hard Coal - Determination of Oxygen Content |
------ |
------ |
|
203 |
IS 15440 : 2004 |
Coal - Sampling of Pulverized Coal Conveyed by Gases in Direct Fired Coal Systems |
------ |
------ |
|
204 |
IS 15464 : 2004 |
Anhydrous ethanol for use in automotive fuel - Specification |
Product Specification |
------ |
|
205 |
IS 15607 : 2016 |
Biodiesel (B100) - Fatty acid methyl esters (Fame) - Specification (First Revision) |
Product Specification |
------ |
|
206 |
IS 15770 : 2008 |
Light Diesel Oil – Specification |
Product Specification |
------ |
|
207 |
IS 15799 : 2008 |
Methods for testing tar and bituminous materials - Determination of durability of bitumen |
Methods of tests |
------ |
|
208 |
IS 1585 : 1960 |
Motor gasoline, 79 octane |
------ |
------ |
|
209 |
IS 1588 : 1967 |
Aviation turbine fuels, wide cut gasoline type |
------ |
------ |
|
210 |
IS 15913 : 2011 |
Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies |
Methods of tests |
------ |
|
211 |
IS 15958 : 2012 |
Compressed natural gas (Cng) for automotive purposes - Specification |
Product Specification |
------ |
|
212 |
IS 1604 : 2012 |
Aviation gasoline - Specification (Fourth Revision) |
Product Specification |
------ |
|
213 |
IS 1614 : 1960 |
Oil of vetiver roots (cultivated) |
------ |
------ |
|
214 |
IS 16143 : Part 1 : 2014 |
Hard coal and coke - Mechanical sampling: Part 1 general introduction |
Others |
------ |
|
215 |
IS 16143 : Part 2 : 2014 |
Hard coal and coke - Mechanical sampling: Part 2 coal - Sampling from moving streams |
Others |
------ |
|
216 |
IS 16143 : Part 3 : 2014 |
Hard coal and coke - Mechanical sampling: Part 3 coal - Sampling from stationary lots |
Others |
------ |
|
217 |
IS 16143 : Part 4 : 2014 |
Hard coal and coke - Mechanical sampling: Part 4 coal - Preparation of test samples |
Others |
------ |
|
218 |
IS 16143 : Part 5 : 2014 |
Hard coal and coke - Mechanical sampling: Part 5 coke - Sampling from moving streams |
Others |
------ |
|
219 |
IS 16143 : Part 6 : 2014 |
Hard coal and coke - Mechanical sampling: Part 6 coke - Preparation of test samples |
Others |
------ |
|
220 |
IS 16143 : Part 7 : 2014 |
Hard coal and coke - Mechanical sampling: Part 7 methods for determining the precision of sampling, sample preparation and testing |
Others |
------ |
|
221 |
IS 16143 : Part 8 : 2014 |
Hard coal and coke - Mechanical sampling: Part 8 methods of testing for bias |
Methods of tests |
------ |
|
222 |
IS 1616 : 1960 |
Oil of spike lavender |
------ |
------ |
|
223 |
IS 1617 : 1960 |
Oil of lavandin |
------ |
------ |
|
224 |
IS 1618 : 1960 |
Lavender French |
------ |
------ |
|
225 |
IS 16204 : 2014 |
Rubber and plastics hoses and hose assemblies - Vocabulary |
Product Specification |
------ |
|
226 |
IS 16209 : 2014 |
Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum |
Methods of tests |
------ |
|
227 |
IS 16460 : 2016 |
Plastics - Film and sheeting - Biaxially oriented polypropylene (Pp) films |
Product Specification |
------ |
|
228 |
IS 16531 : 2016 |
Biodiesel, diesel fuel blend (B6 To B20) - Specification |
Product Specification |
------ |
|
229 |
IS 16610 : 2017 |
Coal - Determination of plastic properties - Constant - Torque gieseler plastometer method |
Methods of tests |
------ |
|
230 |
IS 16611 : 2018 |
Hard coal - Sampling of slurries |
Others |
------ |
|
231 |
IS 16616 : 2018 |
Hard coal - Audibert - Arnu dilatometer test |
Methods of tests |
------ |
|
232 |
IS 16634 : 2017 |
E85 fuel (Blend Of Anhydrous Ethanol And Gasoline) - Specification |
Product Specification |
------ |
|
233 |
IS 1674 : 1960 |
temporary corrosion preventive fluid, soft film, solvent deposited |
------ |
------ |
|
234 |
IS 1677 : 2005 |
Rubber hoses for agricultural spraying second revision) |
Product Specification |
------ |
|
235 |
IS 1677 : 2018 |
Rubber Hoses for Agricultural Spraying (Third Revision) |
Product Specification |
------ |
|
236 |
IS/ISO 16929 : 2013 |
Plastics - Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot - Scale test (First Revision) |
Methods of tests |
------ |
|
237 |
IS 170 : 2004 |
Acetone - Specification ( Fifth Revision ) |
Terminology |
------ |
|
238 |
IS 17042 : Part 1 : 2018 |
Diesel engines - Nox reduction agent aus 32: Part 1 quality requirements |
Product Specification |
------ |
|
239 |
IS 17077 : Part 1 : 2019 |
Plastics - AcrylonitrileButadienestyrene (Abs) moulding and extrusion materials: Part 1 designation system and basis for specifications |
Product Specification |
------ |
|
240 |
IS/ISO 17088 : 2012 |
Specifications for compostable plastics (First Revision) |
Product Specification |
------ |
|
241 |
IS 17397 : Part 1 : 2020 |
Plastics — Thermoplastic Polyurethanes for Moulding and Extrusion Part 1 Designation System and Basis for Specifications |
Product Specification |
------ |
|
242 |
IS 1741 : 1960 |
Latex foam rubber products |
Code of Practice |
------ |
|
243 |
IS 17449 : 2020 |
Pure MDI and Crude or Polymeric MDI — Specification |
Product Specification |
------ |
|
244 |
IS/ISO 17556 : 2012 |
Plastics - Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved (First Revision) |
Methods of tests |
------ |
|
245 |
IS 1781 : 1975 |
Specification for urea, technical (First Revision) |
Product Specification |
------ |
|
246 |
IS 1839 : 1961 |
Toluene, Reagent Grade |
------ |
------ |
|
247 |
IS 1840 : 1961 |
Benzene, Reagent Grade |
------ |
------ |
|
248 |
IS 2038 : 1962 |
Fabric base thermosetting synthetic resin bonded laminated sheets |
------ |
------ |
|
249 |
IS 212 : 1983 |
Specification for crude coal tar for general use (Second Revision) |
Product Specification |
------ |
|
250 |
IS 213 : 1968 |
Coal-based naphtha (superseding IS 214 AND IS 1272 |
------ |
------ |
|
251 |
IS 214 : 1958 |
Coal Tar Solvent Naphtha, Heavy |
------ |
------ |
|
252 |
IS 215 : 1995 |
Road Tar |
Product Specification |
------ |
|
253 |
IS 2213 : 1962 |
Methods of sampling of thermosetting moulding materials |
------ |
------ |
|
254 |
IS 2267 : 1995 |
Polystyrene moulding and extrusion materials - Specification (Second Revision) |
Product Specification |
------ |
|
255 |
IS 229 : 1993 |
Ethyl acetate - Specification (Third Revision) |
Product Specification |
------ |
|
256 |
IS 2396 : 2017 |
Rubber hoses and hose assemblies for measured fuel dispensing - Specification (Fourth Revision) |
Product Specification |
------ |
|
257 |
IS 2396 : 1988 |
Rubber Hose for Fuel Dispensing |
Service Specification |
------ |
|
258 |
IS 2410 : 1963 |
Suction hose of rubber for fire services |
------ |
------ |
|
259 |
IS 245 : 1988 |
Trichloroethylene, Technical |
Terminology |
------ |
|
260 |
IS 2482 : 1990 |
Light duty water suction hose of rubber - Specification (Second Revision) |
Product Specification |
------ |
|
261 |
IS 2508 : 1984 |
Low Density Polyethylene Films |
Product Specification |
------ |
|
262 |
IS 2630 : 1992 |
Nitrobenzene - Specification (Second Revision) |
Product Specification |
------ |
|
263 |
IS 2632 : 1964 |
Specification for crotonaldehyde |
Product Specification |
------ |
|
264 |
IS 2660 : 1964 |
Oil, Cylinder Grade 4 |
------ |
------ |
|
265 |
IS 2740 : 1986 |
Specification for sulphanilic acid, technical (Second Revision) |
Product Specification |
------ |
|
266 |
IS 2741 : 1989 |
Naphthol - Specification (Second Revision) |
Product Specification |
------ |
|
267 |
IS 2744 : 1984 |
Specification for 1 - Naphthylamine (First Revision) |
Product Specification |
------ |
|
268 |
IS 2833 : 1973 |
Aniline, Technical |
Service Specification |
------ |
|
269 |
IS 2880 : 1986 |
Pressure sensitive adhesive cellulose tapes |
------ |
------ |
|
270 |
IS 3065 : 1985 |
Specification for cutting oil, neat (Second Revision) |
Product Specification |
------ |
|
271 |
IS 310 : Part 1 : 1951 |
Methods of sampling and test for lubricants: Part 1 |
------ |
------ |
|
272 |
IS 310 : Part 2 : 1954 |
Methods of sampling and test for lubricants: Part 2 |
------ |
------ |
|
273 |
IS 311 : 1951 |
Oil, cylinder, pure mineral, ordinary |
------ |
------ |
|
274 |
IS 312 : 1951 |
Oil, cylinder, compounded, ordinary |
------ |
------ |
|
275 |
IS 313 : 1951 |
Oil, cylinder, pure mineral, super heat |
------ |
------ |
|
276 |
IS 3131 : 1986 |
Musk Ambrette |
Product Specification |
------ |
|
277 |
IS 314 : 1951 |
Oil, cylinder, compounded, super heat |
------ |
------ |
|
278 |
IS 315 : 1951 |
Oil, cylinder, pure mineral, filtered |
------ |
------ |
|
279 |
IS 316 : 1951 |
Oil, cylinder, compounded, filtered |
------ |
------ |
|
280 |
IS 317 : 1970 |
Automotive hydraulic brake sluid moderate duty |
------ |
------ |
|
281 |
IS 322 : 1952 |
Power Alcohol |
------ |
------ |
|
282 |
IS 3226 : 1965 |
Oil Of Bergamot |
------ |
------ |
|
283 |
IS 3227 : 1965 |
Oil Of Bois De Rose |
------ |
------ |
|
284 |
IS 3249 : 1965 |
Oil Of Rosemary |
------ |
------ |
|
285 |
IS 326 : Part 1 : 1984 |
Methods of sampling and test for natural and synthetic perfumery materials: Part 1 sampling (Third Revision) |
Methods of tests |
------ |
|
286 |
IS 326 : Part 2 : 1980 |
Natural and synthetic perfumery materials - Methods of sampling and test Part 2 Preliminary examination of perfumery materials and samples ( Third Revision ) |
Methods of tests |
------ |
|
287 |
IS 326 : Part 9 : 1980 |
Methods of Sampling and Test for Natural and Synthetic Perfumery Materials - Part IX : Determination of Ester Value after Acetylation and Free Alcohols |
Methods of tests |
------ |
|
288 |
IS 326 : Part 11 : 1986 |
Methods of test for natural and synthetic perfumery materials (Part 11) Determination of carbonyl value and content of carbonyl compounds |
Methods of tests |
------ |
|
289 |
IS 326 : Part 19 : 1998 |
Method of Sampling and Test for Natural and Synthetic Perfumery Materials - Part 19 : GAS Chromatograpfilc Analysis of Perfumery Materials |
Methods of tests |
------ |
|
290 |
IS 326 : Part 19 : Sec 1 : 2018 |
Methods of sampling and test for natural and synthetic perfumery materials: Part 19 gas chromatographic analysis of perfumery materials section 1 on packed columns - General method (First Revision) |
Methods of tests |
------ |
|
291 |
IS 326 : Part 19 : Sec 2 : 2018 |
Methods of sampling and test for natural and synthetic perfumery materials: Part 19 gas chromatographic analysis of perfumery materials section 2 on capillary columns - General method (First Revision) |
Methods of tests |
------ |
|
292 |
IS 326 : Part 20 : Sec 2 : 2018 |
Methods of Sampling and Test for Natural and Synthetic Perfumery Material Part 29 General Guidance on Chromatographic Profiles Section 2 Utilization of chromatographic profiles of samples natural and synthetic perfumery material |
Methods of tests |
------ |
|
293 |
IS 328 : 2016 |
Oil of eucalyptus globulus - Specification (Third Revision) |
Product Specification |
------ |
|
294 |
IS 334 : 2002 |
Glossary of terms relating to bitumen and tar (Third Revision) |
Terminology |
------ |
|
295 |
IS 336 : 1973 |
Specification for ether |
Product Specification |
------ |
|
296 |
IS 3371 : 1980 |
Di-n-butyl Phthalate |
------ |
------ |
|
297 |
IS 3395 : 1997 |
Low density polyethylene (Ldpe) and linear low density polyethylene (Lldpe) materials for moulding and extrusion - Specification (Second Revision) |
Product Specification |
------ |
|
298 |
IS 3400 : Part 1 : 2012 |
Methods of test for vulcanized rubber: Part 1 determination of tensile stress - Strain properties (Third Revision) |
Methods of tests |
------ |
|
299 |
IS 3400 : Part 2 : 2014 |
Methods of test for vulcanized rubber: Part 2 rubber, vulcanized or thermoplastic - Determination of hardness (Hardness Between 10 Irhd And 100 Irhd) (Fourth Revision) |
Methods of tests |
------ |
|
300 |
IS 3400 : Part 3 : 2018 |
Methods of test for vulcanized rubbers: Part 3 determination of abrasion resistance using a rotating cylindrical drum device (Second Revision) |
Methods of tests |
------ |
|
301 |
IS 3400 : Part 5 : 2020 |
Methods of Test for Vulcanized Rubbers Part 5 Adhesion of Rubbers to Textile Fabrics ( Third Revision ) |
Methods of tests |
------ |
|
302 |
IS 3400 : Part 7 : 1985 |
Methods of test for vulcanized rubbers: Part 7 resistance to flex - Cracking (First Revision) |
Methods of tests |
------ |
|
303 |
IS 3400 : Part 8 : 1983 |
Methods of test for vulcanized rubbers: Part 8 resistance to crack - Growth (First Revision) |
Methods of tests |
------ |
|
304 |
IS 3400 : Part 10 : 1977 |
Methods of test for vulcanized rubbers: Part x compression set at constant strain (First Revision) |
Methods of tests |
------ |
|
305 |
IS 3400 : Part 10 : Sec 1 : 2020 |
Methods of Test for Vulcanized Rubbers Part 10 Compression Set Section 1 At ambient or elevated temperatures ( Second Revision ) |
Methods of tests |
------ |
|
306 |
IS 3400 : Part 10 : Sec 2 : 2020 |
Methods of Test for Vulcanized Rubbers Part 10 Compression Set Section 2 At low temperatures ( Second Revision ) |
Methods of tests |
------ |
|
307 |
IS 3400 : Part 12 : 1971 |
Methods of test for vulcanized rubbers: Part xii tear strength - Crescent test piece |
Methods of tests |
------ |
|
308 |
IS 3400 : Part 13 : 1983 |
Methods of test for vulcanized rubbers: Part 13 tension set (First Revision) |
Methods of tests |
------ |
|
309 |
IS 3400 : Part 14 : 1984 |
Methods of test for vulcanized rubbers: Part 14 adhesion of rubber to metal (First Revision) |
Methods of tests |
------ |
|
310 |
IS 3400 : Part 15 : 1971 |
Methods of test for vulcanized rubbers: Part 15 volume resistivity of electrically conducting and antistatic rubbers |
Methods of tests |
------ |
|
311 |
IS 3400 : Part 17 : 1974 |
Methods of test for vulcanized rubbers: Part xvii tear strength - Angular test piece |
Methods of tests |
------ |
|
312 |
IS 3400 : Part 18 : 1995 |
Methodsoftestforvulcanized rubbers: Part 18 stiffness at low temperature (Gehman Test) (First Revision) |
Methods of tests |
------ |
|
313 |
IS 3400 : Part 23 : 2002 |
Methods of Test for Vulcanized Rubbers - Part 23 : Rubber - Determination of Indentation Hardness by Means of Pocket Hardness Meters |
Methods of tests |
------ |
|
314 |
IS 3400 : Part 23 : Sec 1 : 2018 |
Methods of test for vulcanized rubbers: Part 23 rubber - Determination of indentation hardness by means of pocket hardness meters section 1 durometer method (Shore Hardness) (First Revision) |
Methods of tests |
------ |
|
315 |
IS 3400 : Part 24 : 2012 |
Methods of test for vulcanized rubber: Part 24 rubber and plastics hose - Determination of adhesion between components (First Revision) |
Methods of tests |
------ |
|
316 |
IS 3400 : Part 25 : 2018 |
Methods of Test Vulcanized Rubber Part 25 Determination of Low Temperature Brittleness |
Methods of tests |
------ |
|
317 |
IS 3400 : Part 28 : 2018 |
Methods of test for vulcanized rubbers: Part 28 rubber, vulcanized or thermoplastic - Determination of stress relaxation in compression - Testing at constant temperature |
Methods of tests |
------ |
|
318 |
IS 3400 : Part 29 : 2018 |
Methods of test for vulcanized rubbers: Part 29 - Rubber, vulcanized or thermoplastic - Determination of ageing characteristics by measurement of stress relaxation in tension |
Methods of tests |
------ |
|
319 |
IS 3418 : 1968 |
Oil and solvent-resistant hose of rubber with braided textile reinforcement |
------ |
------ |
|
320 |
IS 3433 : 1965 |
Oil, Mineral Colza |
------ |
------ |
|
321 |
IS 3465 : 1966 |
Jointing Compound For Use In Lpg Appliances And Installations |
------ |
------ |
|
322 |
IS 3470 : 2002 |
Hexane, Food Grade |
Product Specification |
------ |
|
323 |
IS 3533 : 1965 |
Oil Of Linaloe Berries |
------ |
------ |
|
324 |
IS 3549 : 2017 |
Rubber hoses and hose assemblies for water suction and discharge - Specification (Second Revision) |
Product Specification |
------ |
|
325 |
IS 3549 : 1983 |
Water Suction and Discharge Hose of Rubber, Heavy Duty ( Covers IS 2410 : 1963 Also ) |
Methods of tests |
------ |
|
326 |
IS 3557 : 1965 |
Air Hose Of Rubber, Heavy Duty, With Woven Reinforcement |
------ |
------ |
|
327 |
IS 3565 : 1966 |
Rubber Teats for Feeding Bottles |
Code of Practice |
------ |
|
328 |
IS 3572 : 1968 |
Welding Hose Of Rubber With Braided Textile Reinforcement |
------ |
------ |
|
329 |
IS 358 : 1964 |
Benzole, Industrial (revised) |
------ |
------ |
|
330 |
IS 359 : 1965 |
Xylole, Industrial Solvent Grade |
------ |
------ |
|
331 |
IS 3660 : Part 3 : 1988 |
Methods of Test for Natural Rubber - Part 3 : Determination of Ash |
------ |
------ |
|
332 |
IS 3660 : Part 8 : 1999 |
Methods of test for natural rubber: Part 8 mixing and vulcanizing of rubber in standard compound [nr:9] (Second Revision) |
Methods of tests |
------ |
|
333 |
IS 3660 : Part 11 : 2017 |
Methods of test for natural rubber: Part 11 determination of plasticity - Rapid - Plastimeter method [ nr : 12 ] (Second Revision) |
Methods of tests |
------ |
|
334 |
IS 3660 : Part 12 : 2017 |
Methods of test for natural rubber: Part 12 determination of plasticity retention index (Pri) [ nr : 13 ] (Second Revision) |
Methods of tests |
------ |
|
335 |
IS 3660 : Part 13 : 1997 |
Methods of test for natural rubber: Part 13 determination of colour (Nr:14) (First Revision) |
Methods of tests |
------ |
|
336 |
IS 3672 : 1980 |
Di-Octyl phthalate plasticizer |
------ |
------ |
|
337 |
IS 3676 : 1986 |
Pressure sensitive adhesive PVC tapes |
------ |
------ |
|
338 |
IS 3701 : 1985 |
Rubber Protective Sheaths (condoms) |
------ |
------ |
|
339 |
IS 3708 : Part 4 : 2016 |
Methods of test for natural rubber latex: Part 4 natural rubber latex concentrate - Determination of alkalinity (Third Revision) |
Methods of tests |
------ |
|
340 |
IS 3708 : Part 5 : 2018 |
Methods of test for natural rubber latex: Part 5 determination of koh number (Third Revision) |
Methods of tests |
------ |
|
341 |
IS 3708 : Part 7 : 2005 |
Methods of test for natural rubber latex: Part 7 determination of volatile fatty acid number (Second Revision) |
Methods of tests |
------ |
|
342 |
IS 3708 : Part 10 : 1986 |
Methods of test for natural rubber latex: Part 10 determination of boric acid (First Revision) |
Methods of tests |
------ |
|
343 |
IS 3708 : Part 12 : 1966 |
Methods of test for natural rubber latex: Part 12 Determination of volatile fatty acid number, total nitrogen, total copper, total iron, total manganese, total ash |
------ |
------ |
|
344 |
IS 3708 : Part 13 : 1968 |
Methods of test for natural rubber latex: Part 13 Determination of boric acid and magnesium |
------ |
------ |
|
345 |
IS 3810 : Part 3 : 1977 |
Glossary of terms relating to solid mineral fuels: Part 3 coke |
Terminology |
------ |
|
346 |
IS 387 : 1954 |
Wood Naptha As A Denaturing Material |
------ |
------ |
|
347 |
IS 3958 : 1984 |
Methods of sampling cosmetics (First Revision) |
Methods of tests |
------ |
|
348 |
IS 3959 : 2004 |
Skin powder - Specification (Second Revision) |
Product Specification |
------ |
|
349 |
IS 4023 : 1991 |
Methods for the determination of reactivity of coke (First Revision) |
Methods of tests |
------ |
|
350 |
IS 409 : 1952 |
Grease, S. No. 3 |
------ |
------ |
|
351 |
IS 4105 : 2020 |
Specification for Styrene ( Vinyl Benzene ) ( Second Revision ) |
Product Specification |
------ |
|
352 |
IS 4105 : 1988 |
Styrene (Vinyl Benzene) |
Product Specification |
------ |
|
353 |
IS 425 : 1953 |
Shellac adhesive for steam flange joints |
------ |
------ |
|
354 |
IS 4271 : 1967 |
Coumarin |
------ |
------ |
|
355 |
IS 4311 : 1967 |
Method for the determination of mineral matter in coal |
Methods of tests |
------ |
|
356 |
IS 436 : Part 1 : Sec 2 : 1976 |
Methods for sampling of coal and coke: Part I Sampling of Coal/Section 2: Mechanical sampling |
Methods of tests |
------ |
|
357 |
IS 436 : Part 2 : 1965 |
Methods of sampling of coal and coke: Part 2 Sampling of coke |
Methods of tests |
------ |
|
358 |
IS 443 Part 1 : 2017 |
Methods of test for rubber and plastics hoses: Part 1 assessment of ozone resistance under static conditions (Third Revision) |
Methods of tests |
------ |
|
359 |
IS 443 : 1975 |
Methods Of Sampling And Test For Rubber Hoses |
Methods of tests |
------ |
|
360 |
IS 443 : Part 2 : 2016 |
Methods of test for rubber and plastics hoses: Part 2 determination of volumetric expansion |
Methods of tests |
------ |
|
361 |
IS 443 : Part 3 : 2017 |
Methods of test for rubber and plastics hoses: Part 3 hydrostatic testing (Third Revision) |
Methods of tests |
------ |
|
362 |
IS 443 : Part 4 : 2016 |
Methods of test for rubber and plastics hoses: Part 4 determination of electrical resistance and conductivity (Third Revision) |
Methods of tests |
------ |
|
363 |
IS 443 : Part 5 : 2018 |
Methods of test for rubber and plastics hoses: Part 5 determination of abrasion of lining |
Methods of tests |
------ |
|
364 |
IS 443 : Part 6 : 2019 |
Methods of test for rubber and plastics hoses: Part 6 hydraulic pressure impulse test without flexing |
Methods of tests |
------ |
|
365 |
IS 444 : 1987 |
General purpose rubber water hose (Superseding IS 445 : 1964 and IS 913 : 1968) |
Product Specification |
------ |
|
366 |
IS 445 : 1964 |
Water Hose Of Rubber, High Pressure With Woven Reinforcement |
------ |
------ |
|
367 |
IS 446 : 1987 |
Rubber Air Hose |
Others |
------ |
|
368 |
IS 4511 : Part 4 : 1986 |
Methods of test for styrene - Butadiene rubber (Sbr) latices: Part 4 determination of bound styrene (First Revision) |
Methods of tests |
------ |
|
369 |
IS 4511 : Part 7 : 1967 |
Methods of test for styrene-butadiene rubber (SBR) latices: Part 7 Determination of dry polymer, total solids, density, residual styrene, bound styrene and soap content |
------ |
------ |
|
370 |
IS 454 : 1994 |
Double - Acting spring hinges - Specification (Third Revision) |
Product Specification |
------ |
|
371 |
IS 4576 : 2018 |
Liquefied Petroleum Gases — Specification ( Third Revision ) |
Product Specification |
------ |
|
372 |
IS 4639 : 1968 |
Glossary Of Petroleum Terms |
Terminology |
------ |
|
373 |
IS 4654 : 1993 |
Paraffin Wax |
Methods of tests |
------ |
|
374 |
IS 4770 : 1991 |
Rubber gloves - Electrical purposes - Specification (First Revision) |
Product Specification |
------ |
|
375 |
IS 4836 : 1968 |
Foundary Coke |
------ |
------ |
|
376 |
IS 495 : 1967 |
Specification for graphite, flake for lubricants (First Revision) |
Product Specification |
------ |
|
377 |
IS 496 : 1982 |
Automotive internal combustion engine lubricating oils |
------ |
------ |
|
378 |
IS 5018 : 1968 |
Classification of hard coals by type |
------ |
------ |
|
379 |
IS 5025 : 1985 |
Gum Karaya |
------ |
------ |
|
380 |
IS 5062 : Part 3 : 2017 |
Methods of test for brown coals and lignites: Part 3 determination of the yields of tar, water, gas and coke residue by low temperature distillation (First Revision) |
Methods of tests |
------ |
|
381 |
IS 5062 : Part 7 : 2017 |
Methods of test for brown coals and lignites: Part 7 determination of humic acids |
Methods of tests |
------ |
|
382 |
IS 508 : 1987 |
Specification for grease, graphited (Fourth Revision) |
Product Specification |
------ |
|
383 |
IS 509 : 1953 |
Grease, L No. 4 |
------ |
------ |
|
384 |
IS 5132 : 1969 |
Hose reel tubing for fire fighting |
------ |
------ |
|
385 |
IS 5137 : 1990 |
Rubber hose for cement grouting specification (Second Revision) |
Product Specification |
------ |
|
386 |
IS 5149 : 1977 |
Maleic Anhydride, Technical |
Methods of tests |
------ |
|
387 |
IS 5166 : 1969 |
Cement grouting hose of rubber with graded textile reinforcement |
------ |
------ |
|
388 |
IS 517 : 1986 |
Specification for Methanol ( Methyl Alcohol ) ( Third Revision ) |
Product Specification |
------ |
|
389 |
IS 518 : 1954 |
Methyl Acetone |
------ |
------ |
|
390 |
IS 5188 : 1985 |
Specification for Cold Polymerized Oil-extended Raw Styrene-butadiene Rubber |
------ |
------ |
|
391 |
IS 5189 : 1985 |
Specification for cold polymerized raw styrene - Butadiene rubber (First Revision) |
Product Specification |
------ |
|
392 |
IS 527 : 1954 |
Rectified Oil Of Camphor |
------ |
------ |
|
393 |
IS 5295 : 1985 |
Specification for ethylene glycol (First Revision) |
Product Specification |
------ |
|
394 |
IS 5339 : 2004 |
Skin powder for infants - Specification (Second Revision) |
Product Specification |
------ |
|
395 |
IS 534 : 2007 |
Benzene - Specification (Fourth Revision) |
Product Specification |
------ |
|
396 |
IS 535 : 1955 |
Benzene, Pure, Nitration Grade |
------ |
------ |
|
397 |
IS 536 : 1968 |
Specification foe Toluole, Industrial |
------ |
------ |
|
398 |
IS 538 : 2000 |
Phenol (Carbolic Acid) - Specification (Second Revision) |
Product Specification |
------ |
|
399 |
IS 5382 : 1985 |
Rubber Sealing Rings for Gas Mains, Water Mains and Sewers |
Methods of tests |
------ |
|
400 |
IS 5383 : 2006 |
Tooth powder - Specification (Second Revision) |
Product Specification |
------ |
|
401 |
IS 5430 : 1981 |
Ammonia Preserved Concentrated Natural Rubber Latex |
Methods of tests |
------ |
|
402 |
IS 5464 : 1995 |
Citric acid, monohydrate - Specification |
Product Specification |
------ |
|
403 |
IS 5615 : 1970 |
Gas Coke |
------ |
------ |
|
404 |
IS 5783 : 1970 |
Rubber war-dressing and Porter's gloves |
------ |
------ |
|
405 |
IS 5797 : 2016 |
Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling - Specification (Fourth Revision) |
Product Specification |
------ |
|
406 |
IS 5808 : 1970 |
Linalool |
------ |
------ |
|
407 |
IS 5894 : 2005 |
Rubber Hose for Sand Blasting |
Product Specification |
------ |
|
408 |
IS 5937 : 1970 |
Hot water hose of rubber with braided textile reinforcement |
------ |
------ |
|
409 |
IS 6048 : 1970 |
temporary corrosion preventive, soft film, hot dipping type |
------ |
------ |
|
410 |
IS 6241 : 1971 |
Method of test for determination of stripping value of road aggregates |
Methods of tests |
------ |
|
411 |
IS 6307 : 1985 |
Specification for rigid pvc sheets (First Revision) |
Product Specification |
------ |
|
412 |
IS 6356 : 2001 |
Toothpaste - Specification (Third Revision) |
Product Specification |
------ |
|
413 |
IS 636 : 1988 |
Non-percolating flexible fire fighting delivery hose |
Product Specification |
------ |
|
414 |
IS 6372 : 1971 |
Coke For Ferro-alloys |
------ |
------ |
|
415 |
IS 6407 : 1971 |
Rubber Aprons For Hospital Use |
------ |
------ |
|
416 |
IS 6417 : 1972 |
Rubber sand blast hose with woven textile reinforcement |
------ |
------ |
|
417 |
IS 6604 : 1991 |
Code for packaging of solid pesticides (Up To 1000g) (First Revision) |
Product Specification |
------ |
|
418 |
IS 6617 : 1972 |
Oil of mandrin orange, cold pressed |
------ |
------ |
|
419 |
IS 6627 : 1980 |
Dimethyl phthalate plasticizer |
------ |
------ |
|
420 |
IS 695 : 1986 |
Acetic Acid - Specification ( Fourth Revision ) |
Product Specification |
------ |
|
421 |
IS 7016 : Part 1 : 1982 |
Methods of test for coated and treated fabrics: Part 1 determination of roll characteristics (First Revision) |
Methods of tests |
------ |
|
422 |
IS 7016 : Part 3 : 1981 |
Methods of test for coated and treated fabrics: Part 3 determination of tear strength (First Revision) |
Methods of tests |
------ |
|
423 |
IS 7016 : Part 3 : Sec 2 : 2017 |
Methods of test for coated and treated fabrics: Part 3 determination of tear resistance section 2 ballistic pendulum method (Second Revision) |
Methods of tests |
------ |
|
424 |
IS 7016 : Part 6 : 1984 |
Methods of test for coated and treated fabrics - Part 6 : determination of bursting strength (First Revision) |
Methods of tests |
------ |
|
425 |
IS 7016 : Part 6 : Sec 1 : 2016 |
Methods of test for coated and treated fabrics: Part 6 determination of bursting strength section 1 steel - Ball method (Second Revision) |
Methods of tests |
------ |
|
426 |
IS 7016 : Part 8 : 1975 |
Methods of test for coated and treated fabrics: Part 8 accelerated ageing |
Methods of tests |
------ |
|
427 |
IS 7016 : Part 10 : 1997 |
Methods of test for coated and treated fabrics: Part 10 rubber - Or plastics - Coated fabrics - Low - Temperature bend test (First Revision) |
Methods of tests |
------ |
|
428 |
IS 7016 : Part 11 : 1987 |
Methods of test for coated and treated fabrics: Part 11 determination of flexibility - Flat loop method |
Methods of tests |
------ |
|
429 |
IS 702 : 1988 |
Specification for indusrial bitumen (Second Revision) |
Product Specification |
------ |
|
430 |
IS 7029 : 1973 |
Fode of practice for inhibition of internal combustion engine coolant water |
------ |
------ |
|
431 |
IS 7159 : 1984 |
Methods of test for henna powder |
Methods of tests |
------ |
|
432 |
IS 716 : 1987 |
Pentachlorophenol |
------ |
------ |
|
433 |
IS 718 : 1977 |
Specification for carbon tetrachloride (Second Revision) |
Product Specification |
------ |
|
434 |
IS 7189 : 1974 |
Blast Furnace Coke |
------ |
------ |
|
435 |
IS 719 : 1990 |
Antifriction bearing greases - Specification (Second Revision) |
Product Specification |
------ |
|
436 |
IS 7190 : 1974 |
Methods of determination of bulk density of coke |
Methods of tests |
------ |
|
437 |
IS 7190 : Part 1 : 2004 |
Coke - Methods of test: Part 1 determination of bulk density in a small container (First Revision) |
Methods of tests |
------ |
|
438 |
IS 7190 : Part 2 : 2004 |
Coke - Methods of test part 2 determination of bulk density in a large container (First Revision) |
Methods of tests |
------ |
|
439 |
IS 720 : 1986 |
Specification for locomotive greases (Third Revision) |
Product Specification |
------ |
|
440 |
IS 721 : 1955 |
Grease, S soft, loco |
------ |
------ |
|
441 |
IS 7221 : 1974 |
Methods of determining the moisture holding capacity in hard coals |
------ |
------ |
|
442 |
IS 7277 : 1974 |
Code of practice for safe use of polyethylene in contact with foodstuffs, pharmaceutical and drinking water |
------ |
------ |
|
443 |
IS 7288 : 1974 |
Code of practice for safe use of polyvinyl chloride (PVC) and its copolymers in contact with foodstuffs, pharmaceuticals and drinking water |
------ |
------ |
|
444 |
IS 7299 : 2017 |
Mineral oil for cosmetic industry - Specification (First Revision) |
Product Specification |
------ |
|
445 |
IS 7450 : 1974 |
Vulcanized styrene butadiene rubber (SBR) based compounds |
------ |
------ |
|
446 |
IS 7499 : 2001 |
Natural rubber (Nr) - Evaluation procedure (Second Revision) |
Methods of tests |
------ |
|
447 |
IS 7503 : Part 1 : 1988 |
Glossary of terms used in rubber industry: Part 1 Definitions of Basic Terms |
Terminology |
------ |
|
448 |
IS 7503 : Part 2 : 1988 |
Glossary of terms used in rubber industry: Part 2 Definitions of Additives |
Terminology |
------ |
|
449 |
IS 7503 : Part 3 : 1988 |
Glossary of terms used in rubber industry: Part 3 Definitions relating to properties & testing |
Terminology |
------ |
|
450 |
IS 7503 : Part 4 : 1988 |
Glossary of Terms Used in Rubber Industry - Part 4 : Definitions Relating to Processing |
Terminology |
------ |
|
451 |
IS 7503 : Part 5 : 1988 |
Glossary of terms used in rubber industry: Part 5 Definitions relating to products - hoses |
Terminology |
------ |
|
452 |
IS 7503 : Part 6 : 1986 |
Glossary of terms used in rubber industry: Part 6 Definitions relating to cellular materials |
Terminology |
------ |
|
453 |
IS 7551 : 1975 |
Method of test for compatibility of plastics containers |
------ |
------ |
|
454 |
IS 7574 : 1975 |
Emergency specification for kerosine (alternative to IS 1459 : 1974) |
------ |
------ |
|
455 |
IS 7575 : 1975 |
Emergency specification for diesel fuels (alternative to IS 1460 : 1974) |
------ |
------ |
|
456 |
IS 7645 : 1994 |
Phenyl j - Acid, technical - Specification (First Revision) |
Product Specification |
------ |
|
457 |
IS 7651 : 1997 |
Wire reinforced rubber covered hydraulic hose - Specification (Second Revision) |
Product Specification |
------ |
|
458 |
IS 7661 : 1975 |
4-aminoazobenzene |
Product Specification |
------ |
|
459 |
IS 7667 : 1975 |
Code of Practice for Handling and Storage of Aviation Fuels at Airfield Fuelling Stations |
Code of Practice |
------ |
|
460 |
IS 7695 : 1978 |
Linalool, Synthetic |
------ |
------ |
|
461 |
IS 7696 : 1991 |
Para - Cresyl methyl ether - Specification (First Revision) |
Product Specification |
------ |
|
462 |
IS 7704 : 1993 |
4 - Aminotoluene - 3 - Sulphonic acid - Specification (First Revision) |
Product Specification |
------ |
|
463 |
IS 7884 : 2004 |
Shampoo, surfactant based - Specification (Third Revision) |
Product Specification |
------ |
|
464 |
IS 7933 : 1975 |
Specification for flexible polyurethane foam for domestic mattresses |
Product Specification |
------ |
|
465 |
IS 7961 : 1976 |
Code of practice for safe use of styrene polymers in contact with foodstuffs, pharmaceuticals and drinking water |
------ |
------ |
|
466 |
IS 8058 : 1976 |
Pyridine |
Code of Practice |
------ |
|
467 |
IS 8189 : 1996 |
Rubber hose for on - Shore oil suction and discharge services - Specification (First Revision) |
Product Specification |
------ |
|
468 |
IS 8219 : 1976 |
Synthetic red oxide of iron for rubber industry (excluding venetian red) |
------ |
------ |
|
469 |
IS 8230 : 1976 |
Steel Filled Epoxy Resin Based Adhesives |
------ |
------ |
|
470 |
IS 8255 : 1976 |
Specification for flexible load rearing polyurethane foam components for vehicles |
Product Specification |
------ |
|
471 |
IS 8481 : 2005 |
Oxidation Hair Dyes Liquid |
Methods of tests |
------ |
|
472 |
IS 8482 : 1995 |
Cologne |
Others |
------ |
|
473 |
IS 8543 : Part 3 : Sec 2 : 1978 |
Methods of Testing Plastics - Part III : Preparation of Test Specimens - Section 2 : Injection Moulded Test Specimens |
------ |
------ |
|
474 |
IS 8543 : Part 4 : Sec 1 : 1984 |
Methods of testing plastics Part 4 Short term mechanical properties Section 1 Determination of tensile properties |
------ |
------ |
|
475 |
IS 8551 : 1977 |
Specification for 1 - (4 - Sulphophenyl) - 3 - Methyl - 5 - Pyrazolone |
Product Specification |
------ |
|
476 |
IS 8552 : 1977 |
1 - (4' - Sulphophenyl) - 3 - Carboxy - 5 - Pyrazolone |
Product Specification |
------ |
|
477 |
IS 8553 : 1977 |
Specification for 1 - Phenyl - 3 - Methyl - 5 - Pyrazolone |
Product Specification |
------ |
|
478 |
IS 8654 : 2001 |
Automotive Hydraulic Brake Fluid, Heavy Duty |
Code of Practice |
------ |
|
479 |
IS 8877 : 2017 |
Acetoaceticmethylester - Specification (Second Revision) |
Product Specification |
------ |
|
480 |
IS 8887 : 2004 |
Bitumen Emulsion for Roads (Cationic Type) |
Methods of tests |
------ |
|
481 |
IS 8904 : 1997 |
Anthrarufin |
Product Specification |
------ |
|
482 |
IS 8941 : 1997 |
Copper alloy fancy single taps, combination tap assembly and stop valves for water services - Specification (First Revision) |
Product Specification |
------ |
|
483 |
IS 9048 : 1982 |
re-refined automotive internal combustion engine lubricating oils |
------ |
------ |
|
484 |
IS 911 : 1968 |
Air hose of rubber with braided textile reinforcement |
------ |
------ |
|
485 |
IS 912 : 1963 |
Braided air hose of rubber, light duty |
------ |
------ |
|
486 |
IS 9127 : Part 1 : 1992 |
Methods of petrographic analysis of coal: Part 1 definition of terms relating to petrographic analysis of coal (First Revision) |
Terminology |
------ |
|
487 |
IS 9127 : Part 4 : 2001 |
Methods for petrographic analysis of coal: Part 4 method of determining microlithotype, carbominerite and minerite composition |
Methods of tests |
------ |
|
488 |
IS 913 : 1968 |
Water hose of rubber with braided textile reinforcement |
------ |
------ |
|
489 |
IS 9136 : 1993 |
Calcium complex grease - Specification (First Revision) |
Product Specification |
------ |
|
490 |
IS 914 : 1963 |
Braided water hose of rubber, low pressure |
------ |
------ |
|
491 |
IS 9316 : Part 1 : 1987 |
Methods of test for rubber latex: Part 1 determination of surface tension [rl: 1] (First Revision) |
Methods of tests |
------ |
|
492 |
IS 9316 : Part 4 : 1988 |
Methods of test for rubber latex: Part 4 determination of total solids content ri. : 4 (First Revision) |
Methods of tests |
------ |
|
493 |
IS 9316 : Part 8 : 1987 |
Methods of test for rubber latex: Part 8 determination of total iron [rl:8] |
Methods of tests |
------ |
|
494 |
IS 9382 : 1979 |
Methods for testlNg tar and bituminous materials: determination of effect of heat and air by thin film oven test |
Methods of tests |
------ |
|
495 |
IS 9572 : 1980 |
Benzyl Butyl Phthalate Plasticizer |
------ |
------ |
|
496 |
IS 9573 : 2012 |
RUBBER HOSE FOR LIQUEFIED PETROLEUM GAS (LPG) |
Methods of tests |
------ |
|
497 |
IS 9573 : 2017 |
Rubber Hose For Liquefied Petroleum Gas (LPG) - Specification Part 1 Industrial Application |
Product Specification |
------ |
|
498 |
IS 9591 : 1996 |
Plasticizer esters - Methods of sampling and tests (First Revision) |
Methods of tests |
------ |
|
499 |
IS 9784 : 1981 |
Tejpat Leaf Oil |
------ |
------ |
|
500 |
IS 9849 : 1981 |
Guide for selection of toys for different age groups of children |
------ |
------ |
|
501 |
IS 9873 : PART 1 : 2012 |
Safety Requirements for Toys - Part 1 : Safety Aspects related to Mechanical and Physical Properties |
Methods of tests |
------ |
|
502 |
IS 9873 : PART 2 : 2012 |
Safety Of Toys Part 2 Flammability |
Methods of tests |
------ |
|
503 |
IS 9873 : Part 3 : 2017 |
Safety of toys: Part 3 migration of certain elements (Second Revision) |
Methods of tests |
------ |
|
504 |
IS 9873 : PART 3 : 1999 |
Safety Requirements for Toys - Part 3 : Migration of Certain Elements |
Dimensions |
------ |
|
505 |
IS 9873 : Part 6 : 2017 |
Safety of Toys Part 6 Determination of Certain Pthalate Esters in Toys and Children's Products |
Methods of tests |
------ |
|
506 |
IS 9907 : 1981 |
High Density Poly-ethylene (HDPE) Crates for 500-ml Glass Milk Bottles |
Product Specification |
------ |
|
507 |
IS 9917 : 1983 |
Calcium base heat stable grease specification (First Revision) |
Product Specification |
------ |
