1
IS 10190 : 2018 Acceptance conditions for general purpose parallel lathes - Testing of the accuracy (First Revision)
1
Product Specification
2
IS 10352 : 2017 Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy (Second Revision)
2
Product Specification
3
IS 11958 : Part 1 : 2018 Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle: Part 1 machines with fixed column and movable table (First Revision)
1
Product Specification
4
IS 11958 : Part 2 : 2019 Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle: Part 2 machines with movable column as long the X - Axis (Floor Type) (First Revision)
1
Terminology
5
IS 12295 : 2000 Acceptance conditions for external cylindrical centreless grinding machines - Testing of the accuracy (First Revision)
1
Product Specification
6
IS/ISO 13041 : Part 1 : 2020 Test conditions for numerically controlled turning machines and turning centres Part 1 : Geometric tests for machines with horizontal work holding spindles
1
------
7
IS/ISO 13041 : Part 2 : 2020 Test conditions for numerically controlled turning machines and turning centres Part 2 : Geometric tests for machines with a vertical work holding spindle
1
------
8
IS/ISO 13041 : Part 5 : 2015 Test conditions for numerically controlled turning machines and turning centers: Part 5 accuracy of speeds and interpolations (First Revision)
1
Methods of tests
9
IS 13552 : 2019 Machine tools - Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy (First Revision)
1
Methods of tests
10
IS 13934 : 2018 Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy (First Revision)
1
Methods of tests
11
IS 14872 : Part 1 : 2014 Ball screws: Part 1 vocabulary and designation (First Revision)
1
Terminology
12
IS 14872 : Part 2 : 2024 Ball Screws Part 2 Nominal Diameters, Leads, Nut Dimensions and Mounting Bolts — Metric Series (First Revision)
1
------
13
IS 14872 : Part 3 : 2013 Ball screws: Part 3 acceptance conditions and acceptance tests (First Revision)
1
Product Specification
14
IS 15250 : Part 2 : 2024 Test Conditions for Machining Centres Part 2 Geometric Tests for Machines with Vertical Spindle (Vertical Z-axis) (First Revision)
1
------
15
IS 15250 : Part 7 : 2023 Test conditions for machining centres Part 7 : Accuracy of finished test pieces
1
------
16
IS 15250 : Part 10 : 2024 Test Conditions for Machining Centres Part 10 Evaluation of Thermal Distortions (First Revision)
1
------
17
IS 17257 : 2024 Machine Tools — Short-Term Capability Evaluation of Machining Processes on Metal-Cutting Machine Tools (First Revision)
1
------
18
IS 1878 : Part 1 : 1993 Test chart for general purpose parallel lathes: Part 1 lathes with swing over bed up to 800 mm (Second Revision)
2
Product Specification
19
IS 1878 : Part 2 : 1992 Test chart for general purpose parallel lathes: Part 2 lathes with swing over bed over 800 mm and up to 1600 mm (Second Revision)
2
Product Specification
20
IS 2013 : 1995 T - Slots - Dimensions and spacings (Third Revision)
3
Dimensions
21
IS 2014 : 1996 T - Bolts - Specification (Second Revision)
2
Product Specification
22
IS 2015 : 1977 Specification for t - Nuts (First Revision)
1
Product Specification
23
IS 2063 : Part 2 : 2016 Test code for machine tools: Part 2 determination of accuracy and repeatability of positioning of numerically controlled axes (First Revision)
3
Code of Practice
24
IS 2063 : Part 3 : 2023 Test code for machine tools Part 3 : Determination of thermal effects
1
------
25
IS 2063 : Part 4 : 2023 Test code for machine tools Part 4 : Circular tests for numerically controlled machine tools
1
------
26
IS 2063 : Part 7 : 2023 Test code for machine tools Part 7 : Geometric accuracy of axes of rotation
1
------
27
IS 2161 : 1996 Coolant pumps for general purpose machine tools - Specification (First Revision)
1
Product Specification
28
IS 2182 : 2018 Machine tools - Symbols for indications appearing on machine tools (Second Revision)
2
Others
29
IS 2199 : 1989 Radial drilling machines - Test chart (First Revision)
1
Product Specification
30
IS 2218 : 1999 Speeds and feeds for machine tools (First Revision)
1
Others
31
IS 2243 : 1971 Specification for drill chucks (First Revision)
1
Product Specification
32
IS 2289 : 1976 Specification for 60° dead centres for lathes (First Revision)
1
Product Specification
33
IS 2367 : 1981 Test chart for box type vertical drilling machines (First Revision)
1
Product Specification
34
IS 2368 : 2018 Machine tools - Test conditions for external cylindrical and universal grinding machines with a movable table - Testing of the accuracy (Third Revision)
3
Product Specification
35
IS 2425 : 1982 Test chart for pillar type vertical drilling machines (First Revision)
1
Product Specification
36
IS 2426 : 1985 Test chart for bench drilling machines (First revision)
1
Product Specification
37
IS 2534 : 1999 Carbide tipped dead centres - Specification (First Revision)
1
Product Specification
38
IS 2582 : Part 1 : 2015 Machine tools - Connecting dimensions of spindle noses and work holding chucks: Part 1 conical connection (Third Revision)
3
Dimensions
39
IS 2582 : Part 2 : 2016 Machine tools - Connecting dimensions of spindle noses and work holding chucks: Part 2 camlock type (Third Revision)
3
Dimensions
40
IS 2582 : Part 3 : 2023 Machine tools Connecting dimensions of spindle noses and work holding chucks Part 3 : Bayonet type
3
------
41
IS 2804 : 1998 Palm grips - Specification (First Revision)
1
Product Specification
42
IS 2876 : 2021 3-Jaw and 4-Jaw Scroll Manually Operated Self-Centering Lathe Chucks (Third Revision)
3
Product Specification
43
IS 2877 : 1986 Test chart for single and double column planing machines (Second Revision)
1
Product Specification
44
IS 2890 : 1983 Specification for taper handles for machine tools (First Revision)
1
Product Specification
45
IS 2909 : 1998 Star grips - Specification (First Revision)
1
Product Specification
46
IS 2987 : 1992 Direction of operation of controls for machine tools - Recommendations (Second Revision)
2
Others
47
IS 2990 : 1986 Specification for tenons (First Revision)
1
Product Specification
48
IS 2995 : 1988 Specification for set collars (First Revision)
1
Product Specification
49
IS 3075 : Part 1 : 1986 Specification for circlips: Part 1 for shafts (First Revision)
1
Dimensions
50
IS 3075 : Part 2 : 1986 Specification for circlips: Part 2 for bores (First Revision)
1
Dimensions
51
IS 3075 : Part 3 : 1986 Specification for circlips: Part 3 type e for shafts (First Revision)
1
Dimensions
52
IS 3691 : 1990 Woodworking machines - Table bandsawing machines - Nomenclature and acceptance conditions (Second Revision)
2
Product Specification
53
IS 3694 : 1991 Test chart for woodworking turning lathes (Second Revision)
2
Product Specification
54
IS 4291 : 1996 C - Washers - Specification (First Revision)
1
Product Specification
55
IS 4294 : 2018 Jig buttons - Specification (Second Revision)
2
Product Specification
56
IS 4295 : 1983 Specification for locking dogs (Catches) with springs (First Revision)
1
Product Specification
57
IS 4297 : 1996 Spherical washers and conical seats - Specification (First Revision)
1
Product Specification
58
IS 4298 : 2009 Swing C- Washers - Specification (Second Revision)
2
Product Specification
59
IS 4299 : 1982 Specification for jig feet (First Revision)
1
Product Specification
60
IS 4502 : 1999 Machine vices - Specification (First Revision)
1
Product Specification
61
IS 4816 : 1987 Specification for permanent - Magnetic chucks (Second Revision)
2
Product Specification
62
IS 5093 : 1996 Locating pins (Round) - Specification (First Revision)
1
Product Specification
63
IS 6040 : 1993 Test chart for precision lathes - Lathes with swing over bed up to 500 mm and distance between centres up to 1500 mm (First Revision)
1
Product Specification
64
IS 6080 : 1985 Specification for double ended clamps (First Revision)
1
Product Specification
65
IS 6081 : 1985 Specification for plain clamps (First Revision)
1
Product Specification
66
IS 6082 : 1985 Specification for slotted clamps (First Revision)
1
Product Specification
67
IS 6090 : 1984 Specification for cam operated clamps (First Revision)
1
Product Specification
68
IS 6197 : 2019 Test chart for vertical boring and turning mills with table diameter up to 1600 mm (First Revision)
1
Product Specification
69
IS 6336 : 1989 Screws for thrust pads (Fixtures) - Specification (First Revision)
1
Product Specification
70
IS 6337 : 1989 Thrust - Pads (Fixtures) - Specification (First Revision)
1
Product Specification
71
IS 6338 : 1989 Clamping screws (Fixtures) - Specification (First Revision)
1
Product Specification
72
IS 6440 : 1997 Quick action drilling jigs - Specification (First Revision)
1
Product Specification
73
IS 666 : Part 1 : 1972 Specification for jig bushes: Part 1 headed and headless jig bushes (Second Revision)
2
Product Specification
74
IS 666 : Part 2 : 1972 Specification for jig bushes: Part 2 renewable drill bushes (Second Revision)
2
Product Specification
75
IS/ISO 6779 : 2019 Test Conditions for Vertical Internal Type Broaching Machines Testing of Accuracy First Revision
1
------
76
IS 7228 : 1983 Recommended spindle diam - Eters for woodworking machines with rotating bored tools (First Revision)
1
Others
77
IS 7249 : 1993 Woodworking machines - Thickness planing machines with rotary cutterblock of one - Side dressing - Nomenclature and acceptance conditions (First Revision)
1
Dimensions
78
IS 7258 : 1990 Woodworking machines - Shingle spindle moulding machines - Nomenclature and acceptance conditions (First Revision)
1
Others
79
IS 7262 : 1996 Turning mandrels - Specification (First Revision)
1
Product Specification
80
IS 7266 : 1991 Test chart for woodworking slot mortising machines (First Revision)
1
Product Specification
81
IS 7267 : 1991 Test chart for woodworking surface planing machines with cutterblock for one - Side dressing (First Revision)
1
Product Specification
82
IS 7279 : 1992 Test chart for woodwork - ing single spindle boring machines (First Revision)
1
Product Specification
83
IS 7286 : 1991 Test chart for woodworking single chain mortising machines (First Revision)
1
Product Specification
84
IS 7289 : 1992 Test chart for woodworking planing machines for two, three or four - Side dressing (First Revision)
1
Product Specification
85
IS 7294 : 1990 Woodworking machines - Single blade circular saw benches with or without travelling table - Nomenclature and acceptance conditions First Revision
1
Others
86
IS 7296 : 1992 Test chart for woodworking surface planing and thicknessing machines (First Revision)
1
Product Specification
87
IS 7824 : 1995 Quick change drill chucks, collets and floating reamer holders Specification (First Revision)
1
Product Specification
88
IS 8107 : 1993 Woodworking machines - Routing machines - Nomenclature and acceptance conditions (First Revision)
1
Others
89
IS 8407 : 2010 Acceptance conditions for gear hobbing machines - Testing of the accuracy (First Revision)
1
Others
90
IS/ISO 8636 : PART 1 : 2000 Machine tools - Test conditions for bridge - Type milling machines - Testing of the accuracy: Part 1 fixed bridge (Portal - Type) machines (First Revision)
1
Product Specification
91
IS 8964 : 1999 Safety conditions for woodworking machines - Recommendations (First Revision)
1
Safety Standard
