1
IS 10608 : 1998 Spline hobs -- Straight sided specification (first revision)
1
Product Specification
2
IS 11172 : Part 1 : 2018 Tool holders with cylindrical shank: Part 1 Cylindrical shank, location bore -- Specification (first revision)
1
Code of Practice
3
IS 11351 : 2005 Stub self-holding tapers -- Dimensions (first revision)
1
Dimensions
4
IS 11523 : 1998 Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole -- Dimensions (first revision)
1
Dimensions
5
IS 11677 : 2004 Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole -- Dimensions (first revision)
1
Others
6
IS 11835 : Part 2 : 2004 Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools: Part 2 Connecting dimensions of chucks and designation (first revision)
1
Dimensions
7
IS 12354 : 2002 Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole -- Dimensions (first revision)
1
Dimensions
8
IS 12691 : 2013 Subland Twist Drills with Cyliindrical Shanks for Holes Prior to Tapping Screw Threads
1
Product Specification
9
IS 12716 : 2002 End mills with indexable specification (first revision)
1
Product Specification
10
IS 14863 : 2018 Turning and copying tool holders and cartridges for indexable inserts -- Designation (first revision)
1
Product Specification
11
IS 1715 : 2002 Self-holding tapers -- Dimensions (third revision)
3
Dimensions
12
IS 1983 : 2004 Shank for turning and planing tools -- Shapes and dimensions of the section (second revision)
2
Dimensions
13
IS 2340 : 1972 Dimensions for self-release 7/24 tapers for milling arbor and tool shanks (first revision)
1
Dimensions
14
IS 2428 : 2007 Classification and application of hard cutting materials for metal removal with defined cutting edges -- Designation of the main groups and groups of application (second revision)
2
Others
15
IS 2594 : 2003 Hacksaw blades -- Specification (second revision)
2
Product Specification
16
IS 2668 : 2004 T-slot cutters with cylindrical shanks and with morse taper shanks having tapped hole (second revision)
1
Dimensions
17
IS 2669 : 1971 Specification for woodruff keyslot milling cutters with parallel shank (first revision)
1
Product Specification
18
IS 3019 : 1973 Specification for high speed steel butt -- Welded single point turning tools (first revision)
1
Product Specification
19
IS 3239 : 1994 Die stock for circular screwing dies -- Specification (second revision)
2
Product Specification
20
IS 4022 : 1996 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole -- Dimensions (second revision)
2
Dimensions
21
IS 4914 : 1983 Specification for tap wrenches adjustable (first revision)
1
Product Specification
22
IS 5030 : Part 1 : 2017 Metal cutting band saw blades: Part 1 Vocabulary (second revision)
2
Others
23
IS 5030 : Part 2 : 2016 Metal cutting band saw blades: Part 2 Characteristics and dimensions (second revision)
2
Dimensions
24
IS 5030 : Part 3 : 2005 Metal cutting bandsaw blade -- Specification: Part 3 Dimensions and other requirements (second revision)
1
Product Specification
25
IS 5031 : 1992 Saws -- Metal slitting -- Specification (second revision)
2
Product Specification
26
IS 5101 : 1991 Twist drills, parallel shank, jobber series -- Specification (first revision)
1
Product Specification
27
IS 5363 : 2017 Micro-drills -- Specification (second revision)
2
Product Specification
28
IS 5365 : 1991 Core drills, parallel shanks -- Specification (second revision )
2
Product Specification
29
IS 5366 : 1978 Specification for core drills, morse taper shanks (first revision)
1
Product Specification
30
IS 5444 : 1978 Specification for parallel hand reamers with parallel shanks (first revision)
1
Product Specification
31
IS 5445 : 1978 Specification for long fluted machine reamers with morse taper shanks (first revision)
1
Product Specification
32
IS 5446 : 2017 Machine chucking reamers with parallel shanks -- Specification (second revision)
2
Product Specification
33
IS 5447 : 2017 Machine chucking reamers with morse taper shank -- Specification (second revision)
2
Product Specification
34
IS 5568 : 1978 Dimensions for tenons and cross -- Slots with taper bore 1 : 30 (first revision)
1
Dimensions
35
IS 5693 : 1988 Specification for countersinks 90°, with parallel shanks and solid pilots (first revision)
1
Product Specification
36
IS 5703 : 1988 Specification for countersinks 90° with morse taper shanks and detachable pilots (first revision)
1
Product Specification
37
IS 5704 : 1988 Specification for counterbores with parallel shanks and solid pilots (first revision)
1
Product Specification
38
IS 5705 : 1988 Specification for detachable pilots for use with counterbores and countersink 90 degree (first revision)
1
Product Specification
39
IS 5710 : 1988 Specification for counterbores with morse taper shanks and detachable pilots (first revision)
1
Product Specification
40
IS 5881 : 1984 Specification for taper pin hand reamers (first revision)
1
Product Specification
41
IS 5918 : 1984 Specification for taper pin, machine reamers with morse taper shanks (first revision)
1
Product Specification
42
IS 5919 : 2018 Machine bridge reamers (second revision)
2
Product Specification
43
IS 5927 : 1981 Specification for reduction sleeves 7/24 tapers to morse tapers (first revision)
1
Product Specification
44
IS 5936 : 1981 Specification for arbors with morse taper shanks for shell tools (first revision)
1
Product Specification
45
IS 5989 : 1998 Hole mills -- Specification (second revision)
2
Product Specification
46
IS 6173 : Part 1 : 1992 Screwing taps -- Dimensions and tolerances on threaded portion: Part 1 For ISO metric screw threads (first revision)
1
Dimensions
47
IS 6173 : Part 2 : 1992 Screwing taps -- Dimensions and tolerances of threaded portion: Part 2 For pipe screw threads G, Rp and Rc series
1
Dimensions
48
IS 6175 : Part 1 : 1992 Screwing taps: Part 1 Hand and short machine screwing taps for ISO metric screw threads sizes ml to m2.5 -- Specification (second revision)
2
Product Specification
49
IS 6175 : Part 2 : 1992 Screwing taps: Part 2 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m10 -- Specification (second revision)
2
Product Specification
50
IS 6175 : Part 3 : 1992 Screwing taps: Part 3 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches and m3 to m100 with fine pitches -- Specification (second revision)
2
Product Specification
51
IS 6255 : 2013 Inverse dovetail cutters and dovetail cutters with cylindrical shanks (third revision)
3
Product Specification
52
IS 6256 : 1995 Shell end single angle milling cutters -- Specification (first revision)
1
Product Specification
53
IS 6257 : 1982 Specification for shell end mills (first revision)
1
Product Specification
54
IS 6308 : 1982 Specification for side and face milling cutters (first revision)
1
Product Specification
55
IS 6309 : 1982 Specification for cylindrical milling cutters (first revision)
1
Product Specification
56
IS 6314 : 1982 Specification for single corner rounding milling cutters (first revision)
1
Product Specification
57
IS 6322 : 1982 Specification for concave milling cutters (first revision)
1
Product Specification
58
IS 6323 : 1982 Specification for convex milling cutters (first revision)
1
Product Specification
59
IS 6326 : 1996 Equal angle milling cutters -- Specification (first revision)
1
Product Specification
60
IS 6352 : 2014 Slot drills with parallel shank -- Specification (second revision)
2
Product Specification
61
IS 6353 : 2014 End mills with parallel shank -- Specification (second revision)
2
Product Specification
62
IS 6354 : 2017 End mills with morse taper shank -- Specification (second revision)
2
Others
63
IS 6355 : 1982 Specification for keyway milling cutters (first revision)
1
Product Specification
64
IS 6388 : 2017 Slot drills with morse taper shank -- Specification (second revision)
2
Product Specification
65
IS/ISO 6462 : 2011 Face milling cutters with indexable inserts -- Dimensions
1
Dimensions
66
IS 6550 : 1992 Thread milling cutter with parallel shank -- Specification (first revision)
1
Product Specification
67
IS 6551 : 1992 Thread milling cutters with morse taper shanks -- Specification (first revision)
1
Product Specification
68
IS 6682 : 1991 Morse taper extension sockets -- Specification (first revision)
1
Product Specification
69
IS 6702 : 1991 Morse taper reduction sleeves specification (first revision)
1
Product Specification
70
IS 6708 : 1977 Specification for centre drills type A (first revision)
1
Product Specification
71
IS 6709 : 1977 Specification for center drills type B (first revision)
1
Product Specification
72
IS 6710 : 1977 Specification for centre drills type R (first revision)
1
Product Specification
73
IS 6776 : 1980 Specification for knurling wheels (first revision)
1
Product Specification
74
IS 7778 : Part 1 : 2003 Small tools sampling inspection procedures: Part 1 Twist drills, countersink and counterbores (first revision)
1
Others
75
IS 7778 : Part 2 : 2003 Small tools sampling inspection procedures: Part 2 Reamers (first revision)
1
Others
76
IS 7778 : Part 3 : 2003 Small tools sampling inspection procedures: Part 3 Sleeves, sockets and adaptors (first revision)
1
Others
77
IS 7778 : Part 4 : 2003 Small tools sampling inspection procedures: Part 4 Screwing taps, dies and knurling tools (first revision)
1
Others
78
IS 7778 : Part 5 : 2003 Small tools sampling inspection procedures: Part 5 Milling cutters (first revision)
1
Others
79
IS 7778 : Part 6 : 2003 Small tools sampling inspection procedures: Part 6 Milling arbors and accessories (first revision)
1
Others
80
IS 7778 : Part 7 : 2003 Small tools sampling inspection procedures: Part 7 Gear cutting tools and broaches (first revision)
1
Others
81
IS 7778 : Part 8 : 2003 Small tools sampling inspection procedures: Part 8 Saws (first revision)
1
Others
82
IS 7778 : Part 9 : 2003 Small tools sampling inspection procedures: Part 9 Single point (HSS And Carbide Tipped) tools (first revision)
1
Others
83
IS 7778 : Part 10 : 2003 Small tools sampling inspection procedures: Part 10 Carbide tips and indexable inserts (first revision)
1
Others
84
IS 7778 : Part 11 : 2003 Small tools sampling inspection procedures: Part 11 Hard metal burrs (first revision)
1
Others
85
IS 7822 : 2005 Twist drills -- Extra-long morse taper shank -- Specification (second revision)
2
Product Specification
86
IS 7823 : 2005 Twist drills -- Extra-long parallel shank -- Specification (second revision)
2
Product Specification
87
IS 8614 : Part 1 : 2013 Milling machine arbors with 7/24 tapers: Part 1 Dimensions and designation (second revision)
2
Dimensions
88
IS 8615 : 1993 Stub milling arbors with self-release 7/24 taper -- Specification (first revision)
1
Terminology
89
IS 8616 : 1993 Stub milling arbors with self-release 7/24 taper and with key -- Specification (first revision)
1
Product Specification
90
IS 8620 : 1993 Clamping nuts for milling arbors specification (first revision)
1
Product Specification
91
IS 8692 : Part 1 : 2004 Cylindrical shanks for milling cutters: Part 1 Dimensional characteristics of plain cylindrical shanks (first revision)
1
Dimensions
92
IS 8692 Part 2 : 2013 Cylindrical shanks for milling cutters: Part 2 Dimensional characteristics of flatted cylindrical shanks(first revision)
2
Dimensions
93
IS 8732 : 2003 Single -- Start solid (Monobloc) gear nobs with tenon drive or axial keyway, 1 to 40 module -- Nominal dimensions (first revision)
1
Dimensions
94
IS 8919 : 2007 Modular units for machine tool construction -- Spindle noses and adjustable adaptors for multi spindle heads (first revision)
1
Others
95
IS 9323 : 1991 Carbide tipped end mills with parallel shanks -- specification (first revision)
1
Product Specification
96
IS 9324 : 1991 Carbide tipped end mlls with morse taper shanks -- Specification (first revision)
1
Product Specification
97
IS 9325 : 1996 Carbide tipped slot drills with parallel shanks -- Specification (first Revision)
1
Product Specification
98
IS 9326 : 1996 Carbide tipped slot drills with morse taper and tapped end shanks -- Specification (first revision)
1
Product Specification
99
IS 9775 : 2000 Carbide flats, squares and rounds -- Dimensions (first revision)
1
Dimensions
100
IS 9897 : 2013 Indexable inserts for cutting tools -- Designation (third revision)
3
Others
