1
IS 10140 : 1982 Specification for bandsaw blades for woodworking
2018
Product Specification
2
IS 10255 : 1982 Specification for tapered die-sinking cutters with parallel shanks
2018
Product Specification
3
IS 10293 : 1982 Dimensions for optional recess on morse taper shanks for tools
2018
Dimensions
4
IS 10412 : 1983 System of designation and marking of single point cutting tools with carbide tips
2018
Others
5
IS 10465 : 1983 Specification for chain wheel rotary tooth form milling cutter
2018
Product Specification
6
IS 10514 : 1983 Specification for split taper socket for tools with parallel shank and driving tenon
2018
Product Specification
7
IS 10571 : 1983 Specification for split taper sockets for tools with parallel shank, driving square and driving tenon
2018
Product Specification
8
IS 10591 : 1983 Specification for segmental saws for cold sawing
2018
Product Specification
9
IS 10608 : 1998 Spline hobs -- Straight sided specification (first revision)
2018
Product Specification
10
IS 10851 : 1984 Specification for taper pin machine reamers with parallel shanks
2021
Product Specification
11
IS 10884 : 1984 Specification for carbide tipped chucking reamers with parallel shanks
2022
Product Specification
12
IS 10885 : 1984 Specification for carbide tipped chucking reamers with morse taper shanks with short cutting edge
2021
Product Specification
13
IS 10915 : 1984 Terms, definitions and types of twist drills
2021
Terminology
14
IS 10952 : 1984 Recommendations for drills for use prior to tapping screw threads
2021
Others
15
IS 11002 : 1984 Specification for machine jig reamers morse taper shank
2021
Product Specification
16
IS 11127 : 1984 Specification for holders for knurling wheels
2021
Product Specification
17
IS 11143 : 1984 Specification for ground high speed steel tool bits
2018
Product Specification
18
IS 11351 : 2005 Stub self-holding tapers -- Dimensions (first revision)
2021
Dimensions
19
IS 11441 : 1985 Dimensions for ground carbide rounds
2021
Dimensions
20
IS 11522 : Part 1 : 1986 Recommendations for basic quantities in cutting and grinding: Part 1 Geometry of the active part of cutting tools, general terms, reference systems, tool and working angles and chip breakers
2018
Others
21
IS 11522 : Part 2 : 2015 Basic quantities in cutting and grinding: Part 2 Geometry of the active part of cutting tools -- General conversion formulae to relate tool and working angles
2019
Code of Practice
22
IS 11523 : 1998 Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole -- Dimensions (first revision)
2018
Dimensions
23
IS 11677 : 2004 Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole -- Dimensions (first revision)
2021
Others
24
IS 11741 : 1986 Specification for circular saws for wood working
2018
Product Specification
25
IS 11829 : 1986 Specification for miniature hand hacksaw blades
2018
Product Specification
26
IS 11835 : Part 1 : 2005 Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools: Part 1 Dimensions of the driving system of tool shanks (first revision)
2021
Dimensions
27
IS 11835 : Part 2 : 2004 Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools: Part 2 Connecting dimensions of chucks and designation (first revision)
2021
Dimensions
28
IS 11934 : 1987 Specification for carbide tipped shell reamers
2018
Product Specification
29
IS 11935 : 1987 Specification for carbide tipped chucking reamers with morse taper shank with long cutting edge
2018
Product Specification
30
IS 11936 : 1987 Specification for carbide tipped long fluted machine reamer with morse taper shank
2018
Product Specification
31
IS 11937 : 1987 Specification for carbide tipped machine jig reamer with morse taper shank
2018
Product Specification
32
IS 11938 : 1987 Specification for tool adaptors for numerically controlled machine tools (Tool rotating type)
2018
Product Specification
33
IS 11943 : Part 2 : 1987 Specification for hard metal burrs: Part 2 Cylindrical burrs (Type A)
2018
Product Specification
34
IS 11943 : Part 3 : 1987 Specification for hard metal burrs: Part 3 Cylindrical round -- (Ball - ) nose burrs (Type C)
2018
Product Specification
35
IS 11943 : Part 4 : 1987 Specification for hard metal burrs: Part 4 Spherical burrs (Type D)
2018
Product Specification
36
IS 11943 : Part 5 : 1987 Specification for hard metal burrs: Part 5 Oval burrs (Type E)
2018
Product Specification
37
IS 11943 : Part 6 : 1987 Specification for hard metal burrs: Part 6 Arch round - (Ball - ) nose burrs (Type F)
2018
Product Specification
38
IS 11943 : Part 7 : 1987 Specification for hard metal burrs: Part 7 Arch pointed nose burrs (Type G)
2018
Product Specification
39
IS 11943 : Part 8 : 1987 Specification for hard metal burrs: Part 8 Flame burrs (Type H)
2018
Product Specification
40
IS 11943 : Part 9 : 1987 Specification for hard metal burrs: Part 9 60 and 90 cone burrs (Type J and K)
2018
Product Specification
41
IS 11943 : Part 10 : 1987 Specification for hard metal burrs: Part 10 Conical round -- (Ball) nose burrs (Type L)
2018
Product Specification
42
IS 11943 : Part 11 : 1987 Specification for hard metal burrs: Part 11 Conical pointed -- Nose burrs (Type M)
2018
Product Specification
43
IS 11943 : Part 12 : 1987 Specification for hard metal burrs: Part 12 Inverted cone burrs (Type N)
2018
Product Specification
44
IS 11949 : 1987 Specification for turret sockets
2018
Product Specification
45
IS 11950 : 1987 Specification for tool adaptors for numerically controlled machine tools (Tool stationary type)
2018
Product Specification
46
IS 12319 : 1988 Circular screwing dies -- General table of dimensions
2018
Dimensions
47
IS 12321 : 1988 Specification for circular screwing dies for ISO metric threads
2018
Product Specification
48
IS 12322 : 1988 Specification for circular screwing dies for taper pipe threads, R - Series
2018
Product Specification
49
IS 12323 : 1988 Specification for circular screwing dies for parallel pipe threads, G series
2021
Product Specification
50
IS 12324 : 1988 Specification for hexagonal die nuts
2018
Product Specification
51
IS 12325 : 1988 Specification for circular screwing dies for ISO metric conduit pipe threads
2018
Product Specification
52
IS 12354 : 2002 Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole -- Dimensions (first revision)
2018
Dimensions
53
IS 12536 : 1989 Small tools -- Disc type gear shaper cutters -- Specification
2018
Product Specification
54
IS 12537 : 1989 Small tools -- Shank type gear shaper cutter -- Specification
2018
Product Specification
55
IS 12538 : 1989 Small tools -- Shank type gear shaper cutter -- Specification
2018
Product Specification
56
IS 12687 : 1989 Small tools -- Subland twist drills with morse taper shank for holes prior to tapping screw threads -- Specification
2023
Product Specification
57
IS 12688 : 1989 Small tools -- Subland twist drills with parallel morse taper shank for clearance holes and countersinks head screws -- Specification
2018
Product Specification
58
IS 12689 : 1989 Small tools -- Subland twist drills with morse taper shank for clearance holes and counterbores for slotted cheese head screws -- Specification
2018
Product Specification
59
IS 12690 : 1989 Small Tools -- Subland twist drills with morse taper shank for clearance holes and counterbores for slotted cheese head screws -- Specification
2018
Product Specification
60
IS 12691 : 2013 Subland Twist Drills with Cyliindrical Shanks for Holes Prior to Tapping Screw Threads
2018
Product Specification
61
IS 12692 : 1989 Small tools -- Subland twist drills with parallel shanks for clearance holes and countersinks for countersunk head screws -- Specification
2018
Product Specification
62
IS 12716 : 2002 End mills with indexable specification (first revision)
2018
Product Specification
63
IS 12728 : 1989 Carbide tips for dead centres -- Specification
2018
Product Specification
64
IS 13167 : 1991 Side and face milling cutters with indexable inserts -- Specification
2018
Product Specification
65
IS 13244 : 1991 Half side and face cutters with indexable inserts -- Specification
2021
Product Specification
66
IS 13303 : 1992 Countersinks 60-degree, 90-degree and 120-degree with morse taper shank -- Specification
2018
Product Specification
67
IS 13304 : 1992 Countersinks 60°,90° and 120° with parallel shank -- Specification
2018
Product Specification
68
IS 13741 : Part 1 : 1993 Carbide tips: Part 1 Carbide tips for single point tools -- Specification
2018
Product Specification
69
IS 13741 : Part 2 : 1993 Carbide tips: Part 2 Carbide tips for single point tools for light cutting operations -- Specification
2018
Product Specification
70
IS 13741 : Part 3 : 1993 Carbide tips: Part 3 Carbide tips for single point tool blanks for sliding head type automats -- Specification
2018
Product Specification
71
IS 13741 : Part 4 : 1993 Carbide tips: Part 4 Carbide tips for multi point tools -- Specification
2018
Product Specification
72
IS 13741 : Part 5 : 1993 Carbide tips: Part 5 Carbide tips for twist drills with point angle 115 degree C -- Specification
2018
Product Specification
73
IS 13741 : Part 6 : 1993 Carbide tips: Part 6 Carbide tips for single point threading tools -- Specification
2018
Product Specification
74
IS 13741 : Part 7 : 1993 Carbide tips: Part 7 Carbide tips for single point round nose turning tools -- Speciification
2018
Product Specification
75
IS 13742 : Part 1 : 1993 Carbide tipped single point tools ISO series: Part 1 Straight turning tool (ISO 1 ) -- Specification
2018
Product Specification
76
IS 13742 : Part 2 : 1993 Carbide tipped single point tools -- ISO series: Part 2 Cranked turning and facing tool (ISO 2) -- Specification
2019
Product Specification
77
IS 13742 : Part 3 : 1993 Carbide tipped single point tools -- ISO series: Part 3 Cranked finishing tool (ISO 3) -- Specification
2018
Product Specification
78
IS 13742 : Part 4 : 1993 Carbide tipped single point tools -- ISO series: Part 4 Broad turning tool (ISO 4) -- Specification
2018
Product Specification
79
IS 13742 : Part 5 : 1993 Carbide tips: Part 5 Carbide tips twist drills with point angle 115 degree -- Specification
2018
Product Specification
80
IS 13742 : Part 6 : 1993 Carbide tipped single point tool ISO series: Part 6 Cranked turning tool (ISO 6) -- Specification
2018
Product Specification
81
IS 13742 : Part 7 : 1993 Carbide tipped single point tools ISO series: Part 7 Parting off tool (ISO 7) -- Specification
2018
Product Specification
82
IS 13742 : Part 8 : 1993 Carbide tipped single point tools -- ISO series: Part 8 boring tool (ISO 8) -- Specification
2018
Product Specification
83
IS 13742 : Part 9 : 1993 Carbide tipped single point tools -- ISO series: Part 9 Boring and facing tool (ISO 9) -- Specification
2018
Product Specification
84
IS 13743 : Part 1 to 10 : 1997 Carbide tipped single point tools -- Ind series -- Specification
2018
Product Specification
85
IS 13744 : Part 1 to 8 : 1995 Carbide tipped single point planing tools -- specification
2021
Product Specification
86
IS 13776 : 1993 Machine tools morse taper shanks -- Cotter slots taper keys
2023
Product Specification
87
IS 14532 : 1998 Reduction sleeves with tenon drive with external and internal 7/24 taper -- Dimensions
2023
Dimensions
88
IS 14585 : 1998 Spline hobs -- Involute sided -- Specification
2018
Product Specification
89
IS 14586 : 1998 Serration hobs -- Straight sided -- Specification
2018
Product Specification
90
IS 14775 : 2000 Spot drills -- Dimensions
2021
Dimensions
91
IS 14865 : 2001 Boring bars for indexable inserts -- Dimensions
2021
Dimensions
92
IS 14867 : 2000 Cartridges, type A, for indexable inserts -- Dimensions
2021
Dimensions
93
IS 14867 : Part 2 : 2019 Cartridges, type A, for indexable inserts: Part 2 Style F
2023
Product Specification
94
IS 14867 : Part 3 : 2019 Cartridges, type A, for indexable inserts: Part 3 Style G
2023
Product Specification
95
IS 14867 : Part 4 : 2019 Cartridges, type A, for indexable inserts: Part 4 Style J
2023
Product Specification
96
IS 14867 : Part 5 : 2019 Cartridges, type A, for indexable inserts: Part 5 Style K
2023
Product Specification
97
IS 14867 : Part 6 : 2019 Cartridges, type A, for indexable inserts: Part 6 Style l
2023
Product Specification
98
IS 14867 : Part 7 : 2019 Cartridges, type A, for indexable inserts: Part 7 Style R
2023
Product Specification
99
IS 14867 : Part 8 : 2019 Cartridges, type A, for indexable inserts: Part 8 Style S
2023
Product Specification
100
IS 14867 : Part 10 : 2019 Cartridges, type A, for indexable inserts: Part 10 Style U
2023
Product Specification
101
IS 14867 : Part 11 : 2019 Cartridges, type A, for indexable inserts: Part 11 Style W
2023
Product Specification
102
IS 14867 : Part 12 : 2019 Cartridges, type A, for indexable inserts: Part 12 Style Y
2023
Product Specification
103
IS 15067 : 2001 End mills with brazed helical hard metal tips -- Dimensions
2018
Dimensions
104
IS 15075 : 2001 Rotary and rotary impact masonry drill bits with hard metal tips -- Dimensions
2018
Dimensions
105
IS 15091 : Part 1 : 2002 Indexable inserts for cutting tools -- Ceramic inserts with rounded corners: Part 1 Dimensions of inserts without fixing hole
2018
Dimensions
106
IS 15091 : Part 2 : 2004 Indexable inserts for cutting tools -- Ceramic inserts with rounded corners: Part 2 dimensions of inserts with cylindrical fixing hole
2021
Dimensions
107
IS 15092 : 2002 Single point cutting tools -- Corner radii
2018
Dimensions
108
IS 15094 : 2002 Classification and designation of approximate chip control zones for indexable inserts with chip breakers
2023
Others
109
IS 15144 : 2002 Indexable hardmetal (Carbide) inserts with rounded corners with partly cylindrical fixing hole -- Dimensions of inserts with 7° normal clearance for light alloy and plastic components turning
2018
Dimensions
110
IS 15762 : 2007 Machine tools -- Positive drive of morse tapers
2017
Dimensions
111
IS 15777 : 2008 Selection of hacksaw tooth for metal cutting -- Recommendations
2018
Others
112
IS B15777 : 2008 Selection of Hacksaw Tooth for Metal Cutting – Recommendations
2018
Others
113
IS 16059 : 2013 Solid carbide parallel shank twist drills jobber series -- Specification
2018
Product Specification
114
IS 16060 : 2013 Solid carbide parallel shank twist drills stub series -- Specification
2018
Product Specification
115
IS 16136 : 2013 Solid carbide end mills with continuous parallel shank -- Specification
2018
Product Specification
116
IS 16176 : 2014 Ratchet pipe threader for taper pipe threads (R - Series) -- Specification
2019
Product Specification
117
IS 16637 : Part 1 : 2018 Tool holders with rectangular shank for indexable inserts: Part 1 General survey, correlation and determination of dimensions
2023
Others
118
IS 16637 : Part 2 : 2018 Tool holders with rectangular shank for indexable inserts: Part 2 Style A
2023
Product Specification
119
IS 16637 : Part 4 : 2018 Tool holders with rectangular shank for indexable inserts: Part 4 Style D
2023
Product Specification
120
IS 16637 : Part 5 : 2018 Tool holders with rectangular shank for indexable inserts: Part 5 Style F
2023
Product Specification
121
IS 16637 : Part 6 : 2018 Tool holders with rectangular shank for indexable inserts: Part 6 Style G
2023
Product Specification
122
IS 16637 : Part 7 : 2018 Tool holders with rectangular shank for indexable inserts: Part 7 Style J
2023
Product Specification
123
IS 16637 : Part 8 : 2018 Tool holders with rectangular shank for indexable inserts: Part 8 Style K
2023
Product Specification
124
IS 16637 : Part 9 : 2018 Tool holders with rectangular shank for indexable inserts: Part 9 Style l
2023
Product Specification
125
IS 16637 : Part 10 : 2018 Tool Holders with rectangular shank for Indexable Inserts: Part 10 Style N
2023
Product Specification
126
IS 16637 : Part 11 : 2018 Tool holders with rectangular shank for indexable inserts: Part 11 Style R
2023
Product Specification
127
IS 16637 : Part 12 : 2018 Tool holders with rectangular shank for indexable inserts: Part 12 Style S
2023
Product Specification
128
IS 16637 : Part 14 : 2018 Tool holders with rectangular shank for indexable inserts: Part 14 Style H
2023
Product Specification
129
IS 16637 : Part 15 : 2018 Tool holders with rectangular shank for indexable inserts: Part 15 Style V
2023
Product Specification
130
IS 16992 : Part 1 : 2018 Cutting tool data representation and exchange: Part 1 Overview, fundamental principles and general information model
2023
Code of Practice
131
IS 17023 : 2018 Cubic boron nitride inserts, tipped or solid -- Dimensions, types
2023
Product Specification
132
IS 17024 : Part 2 : 2018 Tool life testing in milling: Part 2 End milling
2023
Methods of tests
133
IS 17025 : 2018 Milling cutters for high speed machining -- Safety requirements
2023
Safety Standard
134
IS 17026 : 2018 Solid end mills with corner radii and cylindrical shanks made of hard cutting materials -- Dimensions
2023
Dimensions
135
IS 17027 : 2018 Polycrystalline diamond inserts, tipped -- Dimensions, types
2023
Dimensions
136
IS 17028 : 2018 Solid ball -- Nosed end mills with cylindrical shanks, made of carbide and ceramic materials
2023
Dimensions
137
IS 17047 : Part 1 : 2018 Tool life testing in milling: Part 1 Face milling
2023
Methods of tests
138
IS 1715 : 2002 Self-holding tapers -- Dimensions (third revision)
2018
Dimensions
139
IS 1850 : 1961 Dimensions for shank diameters and driving squares for rotating tools
2018
Dimensions
140
IS 1983 : 2004 Shank for turning and planing tools -- Shapes and dimensions of the section (second revision)
2021
Dimensions
141
IS 2340 : 1972 Dimensions for self-release 7/24 tapers for milling arbor and tool shanks (first revision)
2021
Dimensions
142
IS 2428 : 2007 Classification and application of hard cutting materials for metal removal with defined cutting edges -- Designation of the main groups and groups of application (second revision)
2017
Others
143
IS 2594 : 2003 Hacksaw blades -- Specification (second revision)
2018
Product Specification
144
IS 2668 : 2004 T-slot cutters with cylindrical shanks and with morse taper shanks having tapped hole (second revision)
2021
Dimensions
145
IS 2669 : 1971 Specification for woodruff keyslot milling cutters with parallel shank (first revision)
2018
Product Specification
146
IS 2670 : 1991 Thread milling cutter shell type specification (first revision)
2018
Product Specification
147
IS 2671 : 1964 Specification for interlocked milling cutters
2018
Product Specification
148
IS 3019 : 1973 Specification for high speed steel butt -- Welded single point turning tools (first revision)
2018
Product Specification
149
IS 3239 : 1994 Die stock for circular screwing dies -- Specification (second revision)
2018
Product Specification
150
IS 4022 : 1996 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole -- Dimensions (second revision)
2021
Dimensions
151
IS 4914 : 1983 Specification for tap wrenches adjustable (first revision)
2018
Product Specification
152
IS 4921 : 1968 Specification for extension bars
2018
Product Specification
153
IS 5030 : Part 2 : 2016 Metal cutting band saw blades: Part 2 Characteristics and dimensions (second revision)
2021
Dimensions
154
IS 5030 : Part 3 : 2005 Metal cutting bandsaw blade -- Specification: Part 3 Dimensions and other requirements (second revision)
2021
Product Specification
155
IS 5031 : 1992 Saws -- Metal slitting -- Specification (second revision)
2018
Product Specification
156
IS 5100 : 1969 Specification for twist drills, parallel shanks, stub series for right hand cutting
2018
Product Specification
157
IS 5101 : 1991 Twist drills, parallel shank, jobber series -- Specification (first revision)
2018
Product Specification
158
IS 5102 : 1969 Specification for twist drills, parallel shank, long series
2018
Product Specification
159
IS 5103 : 1969 Specification for twist drills, morse taper shanks
2018
Product Specification
160
IS 5104 : 1969 Specification for twist drills, oversize morse taper shank
2018
Product Specification
161
IS 5105 : 1969 Specification for twist drills, taper square shanks for ratchet braces
2018
Product Specification
162
IS 5106 : 1969 Specification for twist drills, taper square shanks for carpenters braces
2018
Product Specification
163
IS 5360 : 1969 Dimensions for driving tenons
2018
Dimensions
164
IS 5362 : 1969 Specification for twist drills, parallel shanks, stub series, left hand cutting tor automatics
2018
Product Specification
165
IS 5364 : 1969 Specification for twist drills for taper pin holes with taper 1 : 50
2018
Product Specification
166
IS 5365 : 1991 Core drills, parallel shanks -- Specification (second revision )
2018
Product Specification
167
IS 5366 : 1978 Specification for core drills, morse taper shanks (first revision)
2018
Product Specification
168
IS 5444 : 1978 Specification for parallel hand reamers with parallel shanks (first revision)
2018
Product Specification
169
IS 5445 : 1978 Specification for long fluted machine reamers with morse taper shanks (first revision)
2018
Product Specification
170
IS 5568 : 1978 Dimensions for tenons and cross -- Slots with taper bore 1 : 30 (first revision)
2023
Dimensions
171
IS/ISO 5604 : Part 4 : 2012 Tool holders for internal turning with cylindrical shank for indexable inserts: Part 4 Style L
2021
Methods of tests
172
IS/ISO 5609 : Part 2 : 2012 Tool holders for internal turning with cylindrical shank for indexable inserts: Part 2 Style F
2021
Methods of tests
173
IS/ISO 5609 : Part 3 : 2012 Tool holders for internal turning with cylindrical shank for indexable inserts: Part 3 Style K
2022
Others
174
IS/ISO 5609 : Part 5 : 2012 Tool holders for internal turning with cylindrical shank for indexable inserts: Part 5 Style U
2021
Methods of tests
175
IS/ISO 5609 : Part 6 : 2012 Tool holders for internal turning with cylindrical shank for indexable inserts: Part 6 Style Q
2021
Methods of tests
176
IS 5693 : 1988 Specification for countersinks 90°, with parallel shanks and solid pilots (first revision)
2018
Product Specification
177
IS 5698 : 1970 Specification for rotary form - relieved gear cutters for spur and helical gears
2018
Product Specification
178
IS 5702 : 1970 Specification for flat thread rolling dies
2018
Product Specification
179
IS 5703 : 1988 Specification for countersinks 90° with morse taper shanks and detachable pilots (first revision)
2018
Product Specification
180
IS 5704 : 1988 Specification for counterbores with parallel shanks and solid pilots (first revision)
2018
Product Specification
181
IS 5705 : 1988 Specification for detachable pilots for use with counterbores and countersink 90 degree (first revision)
2018
Product Specification
182
IS 5710 : 1988 Specification for counterbores with morse taper shanks and detachable pilots (first revision)
2018
Product Specification
183
IS 5881 : 1984 Specification for taper pin hand reamers (first revision)
2021
Product Specification
184
IS 5882 : 1970 Specification for socket reamers with parallel shanks
2018
Product Specification
185
IS 5907 : 1970 Specification for socket reamers with morse taper shanks
2018
Product Specification
186
IS 5918 : 1984 Specification for taper pin, machine reamers with morse taper shanks (first revision)
2021
Product Specification
187
IS 5926 : 1970 Specification for shell reamers
2018
Product Specification
188
IS 5927 : 1981 Specification for reduction sleeves 7/24 tapers to morse tapers (first revision)
2018
Product Specification
189
IS 5936 : 1981 Specification for arbors with morse taper shanks for shell tools (first revision)
2018
Product Specification
190
IS 5989 : 1998 Hole mills -- Specification (second revision)
2018
Product Specification
191
IS 6173 : Part 1 : 1992 Screwing taps -- Dimensions and tolerances on threaded portion: Part 1 For ISO metric screw threads (first revision)
2018
Dimensions
192
IS 6173 : Part 2 : 1992 Screwing taps -- Dimensions and tolerances of threaded portion: Part 2 For pipe screw threads G, Rp and Rc series
2018
Dimensions
193
IS 6175 : Part 1 : 1992 Screwing taps: Part 1 Hand and short machine screwing taps for ISO metric screw threads sizes ml to m2.5 -- Specification (second revision)
2018
Product Specification
194
IS 6175 : Part 2 : 1992 Screwing taps: Part 2 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m10 -- Specification (second revision)
2018
Product Specification
195
IS 6175 : Part 3 : 1992 Screwing taps: Part 3 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches and m3 to m100 with fine pitches -- Specification (second revision)
2018
Product Specification
196
IS 6175 : Part 4 : 1991 Screwing taps: Part 4 Long shank machine screwing taps for ISO metric screw threads sizes from m3 to m24 -- Specification
2018
Product Specification
197
IS 6175 : Part 5 : 1991 Screwing taps: Part 5 Nut screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches -- Specification
2018
Product Specification
198
IS 6175 : Part 6 : 1992 Screwing taps: Part 6 Screwing taps for pipe threads parallel g series -- Specification
2018
Product Specification
199
IS 6175 : Part 7 : 1992 Screwing taps: Part 7 Screwing taps for pipe threads parallel rc series -- Specification
2018
Product Specification
200
IS 6175 : Part 8 : 1992 Screwing taps: Part 8 Screwing taps for pipe threads taper rc series -- Specification
2018
Product Specification
201
IS 6255 : 2013 Inverse dovetail cutters and dovetail cutters with cylindrical shanks (third revision)
2018
Product Specification
202
IS 6256 : 1995 Shell end single angle milling cutters -- Specification (first revision)
2021
Product Specification
203
IS 6257 : 1982 Specification for shell end mills (first revision)
2018
Product Specification
204
IS 6285 : 1971 Dimensions for interchangeability of milling cutters and milling arbors with key drive
2018
Dimensions
205
IS 6308 : 1982 Specification for side and face milling cutters (first revision)
2018
Product Specification
206
IS 6309 : 1982 Specification for cylindrical milling cutters (first revision)
2018
Product Specification
207
IS 6310 : 1971 Dimensions for interchangeability of milling cutters and milling arbors with tenon drive
2018
Dimensions
208
IS 6314 : 1982 Specification for single corner rounding milling cutters (first revision)
2018
Product Specification
209
IS 6322 : 1982 Specification for concave milling cutters (first revision)
2018
Product Specification
210
IS 6323 : 1982 Specification for convex milling cutters (first revision)
2018
Product Specification
211
IS 6324 : 1971 Specification for single angle milling cutters
2018
Product Specification
212
IS 6325 : 1971 Specification for double angle milling cutters
2018
Product Specification
213
IS 6326 : 1996 Equal angle milling cutters -- Specification (first revision)
2018
Product Specification
214
IS 6352 : 2014 Slot drills with parallel shank -- Specification (second revision)
2019
Product Specification
215
IS 6353 : 2014 End mills with parallel shank -- Specification (second revision)
2019
Product Specification
216
IS 6355 : 1982 Specification for keyway milling cutters (first revision)
2018
Product Specification
217
IS/ISO 6462 : 2011 Face milling cutters with indexable inserts -- Dimensions
2019
Dimensions
218
IS 6550 : 1992 Thread milling cutter with parallel shank -- Specification (first revision)
2018
Product Specification
219
IS 6551 : 1992 Thread milling cutters with morse taper shanks -- Specification (first revision)
2018
Product Specification
220
IS 6681 : 1972 Dimensions for self-release 7/24 tapers for spindle noses for milling machines
2018
Dimensions
221
IS 6682 : 1991 Morse taper extension sockets -- Specification (first revision)
2018
Product Specification
222
IS 6702 : 1991 Morse taper reduction sleeves specification (first revision)
2018
Product Specification
223
IS 6708 : 1977 Specification for centre drills type A (first revision)
2018
Product Specification
224
IS 6709 : 1977 Specification for center drills type B (first revision)
2018
Product Specification
225
IS 6710 : 1977 Specification for centre drills type R (first revision)
2018
Product Specification
226
IS 6776 : 1980 Specification for knurling wheels (first revision)
2018
Product Specification
227
IS/ISO 7388 : Part 1 : 2007 Tool Shanks with 7/24 taper for automatic tool changers: Part 1 Dimensions and designation of shanks of forms A,AD,AF,U,UD and UF
2023
Dimensions
228
IS/ISO 7388 : Part 2 : 2007 Tool shanks with 7/24 taper for automatic tool changers: Part 2 Dimensions and designation of shanks of forms J, JD and JF
2023
Dimensions
229
IS/ISO 7388 : Part 3 : 2007 Tool shanks with 7/24 taper for automatic tool changers: Part 3 Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
2018
Product Specification
230
IS 7766 : 1975 Specification for twist drills for jig boring machines
2018
Product Specification
231
IS 7772 : 1975 Specification for shell core drills
2018
Product Specification
232
IS 7773 : 1975 Holding dimensions for broaching tools
2018
Dimensions
233
IS 7778 : Part 1 : 2003 Small tools sampling inspection procedures: Part 1 Twist drills, countersink and counterbores (first revision)
2018
Others
234
IS 7778 : Part 2 : 2003 Small tools sampling inspection procedures: Part 2 Reamers (first revision)
2018
Others
235
IS 7778 : Part 3 : 2003 Small tools sampling inspection procedures: Part 3 Sleeves, sockets and adaptors (first revision)
2018
Others
236
IS 7778 : Part 4 : 2003 Small tools sampling inspection procedures: Part 4 Screwing taps, dies and knurling tools (first revision)
2018
Others
237
IS 7778 : Part 5 : 2003 Small tools sampling inspection procedures: Part 5 Milling cutters (first revision)
2018
Others
238
IS 7778 : Part 6 : 2003 Small tools sampling inspection procedures: Part 6 Milling arbors and accessories (first revision)
2018
Others
239
IS 7778 : Part 7 : 2003 Small tools sampling inspection procedures: Part 7 Gear cutting tools and broaches (first revision)
2018
Others
240
IS 7778 : Part 8 : 2003 Small tools sampling inspection procedures: Part 8 Saws (first revision)
2018
Others
241
IS 7778 : Part 9 : 2003 Small tools sampling inspection procedures: Part 9 Single point (HSS And Carbide Tipped) tools (first revision)
2018
Others
242
IS 7778 : Part 10 : 2003 Small tools sampling inspection procedures: Part 10 Carbide tips and indexable inserts (first revision)
2018
Others
243
IS 7778 : Part 11 : 2003 Small tools sampling inspection procedures: Part 11 Hard metal burrs (first revision)
2018
Others
244
IS 7822 : 2005 Twist drills -- Extra-long morse taper shank -- Specification (second revision)
2021
Product Specification
245
IS 7823 : 2005 Twist drills -- Extra-long parallel shank -- Specification (second revision)
2021
Product Specification
246
IS 8305 : 1976 Specification for twist drills, morse taper shank, long series
2018
Product Specification
247
IS 8306 : 1976 Specification for carbide tipped twist drills, morse taper shank
2018
Product Specification
248
IS 8307 : 1976 Specification for carbide tipped, twist drills, parallel shank
2018
Product Specification
249
IS 8405 : 2005 Thread rolling cylindrical dies -- Specification (first revision)
2018
Product Specification
250
IS 8614 : Part 1 : 2013 Milling machine arbors with 7/24 tapers: Part 1 Dimensions and designation (second revision)
2023
Dimensions
251
IS 8615 : 1993 Stub milling arbors with self-release 7/24 taper -- Specification (first revision)
2018
Terminology
252
IS 8616 : 1993 Stub milling arbors with self-release 7/24 taper and with key -- Specification (first revision)
2018
Product Specification
253
IS 8618 : 1977 Specification for spacing collars for milling arbors
2018
Product Specification
254
IS 8619 : 1977 Specification for bearing collars for milling arbors
2018
Product Specification
255
IS 8620 : 1993 Clamping nuts for milling arbors specification (first revision)
2023
Product Specification
256
IS 8621 : 1977 Specification for retaining screw for milling arbors
2018
Product Specification
257
IS 8692 : Part 1 : 2004 Cylindrical shanks for milling cutters: Part 1 Dimensional characteristics of plain cylindrical shanks (first revision)
2021
Dimensions
258
IS 8692 Part 2 : 2013 Cylindrical shanks for milling cutters: Part 2 Dimensional characteristics of flatted cylindrical shanks(first revision)
2018
Dimensions
259
IS 8692 : Part 3 : 2007 Cylindrical shanks for milling cutters: Part 3 Dimensional characteristics of threaded shanks
2023
Dimensions
260
IS 8732 : 2003 Single -- Start solid (Monobloc) gear nobs with tenon drive or axial keyway, 1 to 40 module -- Nominal dimensions (first revision)
2018
Dimensions
261
IS 8842 : 1978 Specification for high speed steel butt - Welded single point planing tools
2018
Product Specification
262
IS 8918 : 1978 Dimensions for spindle noses for adjustable adaptors
2018
Dimensions
263
IS 8919 : 2007 Modular units for machine tool construction -- Spindle noses and adjustable adaptors for multi spindle heads (first revision)
2017
Others
264
IS 9323 : 1991 Carbide tipped end mills with parallel shanks -- specification (first revision)
2018
Product Specification
265
IS 9324 : 1991 Carbide tipped end mlls with morse taper shanks -- Specification (first revision)
2018
Product Specification
266
IS 9325 : 1996 Carbide tipped slot drills with parallel shanks -- Specification (first Revision)
2018
Product Specification
267
IS 9326 : 1996 Carbide tipped slot drills with morse taper and tapped end shanks -- Specification (first revision)
2018
Product Specification
268
IS 9771 : 1981 Specification for carbide tipped core drills with morse taper shanks
2018
Product Specification
269
IS 9775 : 2000 Carbide flats, squares and rounds -- Dimensions (first revision)
2021
Dimensions
270
IS 9897 : 2013 Indexable inserts for cutting tools -- Designation (third revision)
2018
Others
