| SNo |
IS Number |
Title |
Technical Committee |
|
1 |
IS 16003 : 2012 |
Specification and qualification of welding procedures for metallic materials - General rules |
MTD 11 |
|
2 |
IS 10118 : Part 2 : 1982 |
Code of practice for the selection, installation and maintenance of switchgear and controlgear: Part 2 selection |
ETD 20 |
|
3 |
IS 10118 : Part 3 : 1982 |
Code of practice for selection, installation and maintenance of switchgear and controlgear: Part 3 installation |
ETD 20 |
|
4 |
IS 10118 : Part 4 : 1982 |
Code of practice for selection, installation and maintenance of switchgear and controlgear: Part 4 maintenance |
ETD 20 |
|
5 |
IS 10118 : Part 1 : 2018 |
Black page |
ETD 20 |
|
6 |
IS 1030 : 1998 |
Carbon steel castings for general engineering purposes - Specification (Fifth Revision) |
MTD 14 |
|
7 |
IS 12615 : 2018 |
Line Operated Three Phase a.c. Motors ( IE CODE ) “Efficiency Classes and Performance Specification” ( Third Revision ) |
ETD 15 |
|
8 |
IS 13367 : Part 1 : 1992 |
Safe use of cranes - Code of practice : Part 1 general |
MED 14 |
|
9 |
IS 13473 : Part 1 : 2015 |
Cranes - Vocabulary: Part 1 general |
MED 14 |
|
10 |
IS 13834 : Part 1 : 2018 |
Cranes - Classification: Part 1 general (First Revision) |
MED 14 |
|
11 |
IS 1554 : Part 1 : 1988 |
Specification for PVC insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1 100 V (Third Revision) |
ETD 9 |
|
12 |
IS 1554 : Part 2 : 1988 |
Specification for pvc insulated (Heavy Duty) electric cables: Part 2 for working voltages from 3.3 kV up to and including 11 kV (Second Revision) |
ETD 9 |
|
13 |
IS 15560 : 2005 |
Point hooks with shank up to 160 tonne specification |
MED 14 |
|
14 |
IS 1570 : Part 1 : 1978 |
Schedules for wrought steels: Part 1 steels specifed by tensile and/or yield properties (First Revision) |
MTD 16 |
|
15 |
IS 1570 : Part 2 : Sec 2 : 1987 |
Schedules for wrought fteels: Part 2 carbon steels (Unalloyed Steels): Sec 2 carbon steel wires with related properties (First Revision) |
MTD 16 |
|
16 |
IS 2048 : 1983 |
Specification for parallel keys and keyways (Second Revision ) |
PGD 33 |
|
17 |
IS 2062 : 2011 |
Hot rolled medium and high tensile structural steel - Specification (Seventh Revision) |
MTD 4 |
|
18 |
IS 2266 : 2019 |
Steel wire ropes for general engineering purpose - Specification (Fifth Revision) |
MED 10 |
|
19 |
IS 2553 : Part 1 : 2018 |
Safety glass - Specification: Part 1 architectural, building and general uses (Fourth Revision) |
CHD 10 |
|
20 |
IS 3043 : 2018 |
Code of practice for earthing (Second Revision) |
ETD 20 |
|
21 |
IS 3443 : 1980 |
SPecification for Crane Rail Sections (First Revision) |
CED 7 |
|
22 |
IS 3658 : 1999 |
Code of practice for liquid penetrant flaw detection (Second Revision) |
MTD 21 |
|
23 |
IS 4260 : 2004 |
Recommended practice for ultrasonic testing of butt welds in ferritic steel (Third Revision) |
MTD 21 |
|
24 |
IS 4460 : Part 1 to 3 : 1995 |
Gears - spur and helical gears - Calculation of load capacity (First Revision) |
PGD 33 |
|
25 |
IS 5334 : 2014 |
Magnetic particle flaw detection of welds - Code of practice (Third Revision) |
MTD 21 |
|
26 |
IS 5749 : 1970 |
Specification for forged ramshorn hooks |
MED 14 |
|
27 |
IS 694 : 2010 |
Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1 100 V (Fourth Revision) |
ETD 9 |
|
28 |
IS 7098 : Part 1 : 1988 |
Specification for crosslinked polyethylene insulated PVC sheathed cables: Part 1 for working voltages up to and including 1 100 volts (First Revision) |
ETD 9 |
|
29 |
IS 7504 : 1995 |
Gears - Cylindrical gears - Accuracies methods of inspection (First Revision) |
PGD 33 |
|
30 |
IS 807 : 2006 |
Design, erection and testing (Structural Portion) of cranes and hoists - Code of practice (Second Revision) |
MED 14 |
|
31 |
IS 875 : Part 3 : 2015 |
Design Loads (Other than Earthquake) for Buildings and Structures - Code of Practice Part 3 Wind Loads ( Third Revision ) |
CED 37 |
|
32 |
IS 9968 : Part 1 : 1988 |
Specification for elastomer insulated cables: Part 1 for working voltages up to and including 1 100 volts (First Revision) |
ETD 9 |
|
33 |
IS 9968 : Part 2 : 2002 |
Specification for elastomer - Insulated cables: Part 2 for working voltages from 3.3 kV up to and including 33 kV (First Revision) |
ETD 9 |
|
34 |
IS/IEC 60947 : Part 2 : 2016 |
Low - Voltage switchgear and controlgear: Part 2 circuit - Breakers (First Revision) |
ETD 7 |
|
35 |
IS/IEC 60947 : Part 4 : Sec 1 : 2012 |
Low - Voltage switchgear and controlgear: Part 4 contactors and motor - Starters: Sec 1 electromechanical contactors and motor - Starters (First Revision) |
ETD 7 |
|
36 |
IS 16504 : Part 1 : 2019 |
Safety of Machinery — Electrical Equipment of Machines Part 1 General Requirements ( First Revision ) |
ETD 44 |
|
37 |
IS 16504 : Part 32 : 2017 |
Safety of Machinery - Electrical Equipment of Machines Part 32 Requirements for Hoisting Machines |
ETD 44 |
|
38 |
IS 16819 : 2018 |
Safety of machinery - General principles for design - Risk assessment and risk reduction |
MED 40 |
