| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 13152 : Part 1 : 2013 |
Portable solid bio - Mass cookstove (Chulha) - Specification (First Revision) |
MED 4 |
| 2 |
IS 4561 : Part 4 : 1968 |
Specification for oil cans: Part 4 detachable spout oil cans |
PGD 19 |
| 3 |
IS 2373 : 1981 |
Specification for water meters (bulk type) (third revision) |
CED 3 |
| 4 |
IS 3950 : 1979 |
Specification for surface boxes for sluice valves (first revision) |
CED 3 |
| 5 |
IS 5961 : 1970 |
Specification for cast iron gratings for drainage purposes |
CED 3 |
| 6 |
IS 2482 : 1990 |
Light duty water suction hose of rubber - Specification (Second Revision) |
PCD 13 |
| 7 |
SP 62 : 1997 |
Handbook on causes and prevention of cracks in buildings |
CED 13 |
| 8 |
IS 11847 : 1987 |
Specification for spoke wrenches for bicycle and moped |
PGD 34 |
| 9 |
IS 1341 : 2018 |
Steel Butt Hinges - Specification (Sixth Revision) |
CED 15 |
| 10 |
IS 3818 : 1992 |
Continuous (Piano) hinges -Specification |
CED 15 |
| 11 |
IS 453 : 1993 |
Double Acting Spring Hinges -Specification |
CED 15 |
| 12 |
IS 8110 : 2019 |
Water well screens and slotted pipes - Specification (Third Revision) |
MED 21 |
| 13 |
IS 4017 : 1992 |
CARPENTERS SQUARES - SPECIFICATION ( First Revision ) |
PGD 34 |
| 14 |
IS 15275 : 2003 |
Padlocks - Specification |
MED 33 |
| 15 |
IS 6845 : 1973 |
Specification for wire basket for screening ballast |
PGD 34 |
| 16 |
IS 13345 : 1992 |
Carpenter’s Bevels - Specification |
PGD 34 |
| 17 |
IS 3432 : 1965 |
Specification for clay pipe triangles |
CHD 10 |
| 18 |
IS 6680 : 1992 |
Railway carriagefans - Specification (First Revision) |
ETD 32 |
| 19 |
IS 12920 : 1990 |
Brushes, drain cleaning (Without Handle) - Specification |
CHD 23 |
| 20 |
IS 15333 : 2004 |
Kero - Gas stove - Specification |
MED 26 |
| 21 |
IS 2787 : 2006 |
Oil pressure heaters - Specification (Third Revision) |
MED 26 |
| 22 |
IS 1384 : 1999 |
Oil pressure lanterns - Specification (Third Revision) |
MED 26 |
| 23 |
IS 1238 : 2005 |
Hurricane lanterns - Specification (Fifth Revision) |
MED 26 |
| 24 |
IS 278 : 2009 |
Galvanized steel barbed wire for fencing - Specification (Fourth Revision) |
MED 10 |
| 25 |
IS 8565 : 1977 |
Specification for heald wire |
MTD 4 |
| 26 |
IS 1736 : 1960 |
Specification for honey extractor, Tangential Type |
FAD 3 |
| 27 |
IS 5427 : 1969 |
Specification for honey extractor, radial type |
FAD 3 |
| 28 |
IS 9557 : 1980 |
Specification for wick lamps, non - Pressure type |
MED 26 |
| 29 |
IS 6730 : 1972 |
Specification for felt nails |
PGD 37 |
| 30 |
IS 6732 : 1972 |
Specification for double point nails |
PGD 37 |
| 31 |
IS 6733 : 1972 |
Specification for wall and roofing nails |
PGD 37 |
| 32 |
IS 6738 : 1972 |
Specification for panel pins and lost head nails |
PGD 37 |
| 33 |
IS 866 : 1957 |
Specification forTinmens Rivets |
PGD 37 |
| 34 |
IS 10325 : 2000 |
Square tins -- 15 kg/litre for ghee, vanaspati, edible oils and bakery shortenings -- Specification (Second Revision) |
PGD 38 |
| 35 |
IS 10339 : 2000 |
Ghee, vanaspati, edible oil tins up to 10 kg/litre capacity -- Specification (Second Revision) |
PGD 38 |
| 36 |
IS 916 : 2000 |
Square tins for solid products -- Specification (Fourth Revision) |
PGD 38 |
| 37 |
IS 847 : 1968 |
Specification for Smith Fullers (First Revision) |
PGD 34 |
| 38 |
IS 10106 : Part 3 : Sec 3 : 1985 |
Packaging code: Part 3 ancillary materials section 3 tensional strapping |
TED 24 |
| 39 |
IS 14253 : 1995 |
Educational instrumentsand equipment - Wire gauze for school and laboratory use - Specification |
PGD 22 |
| 40 |
IS 13356 : 1992 |
Precast Ferrocement Water Tanks up to 10000 Litres Capacity - |
CED 53 |
| 41 |
IS 6041 : 1985 |
Code of practice for construction of autoclaved cellular concrete block masonry (First Revision) |
CED 53 |
| 42 |
IS 6042 : 1969 |
Code of practice for construction of light - Weight concrete block masonry |
CED 53 |
| 43 |
IS 6523 : 1983 |
Precast Reinforced Concrete Door and Window Frames |
CED 53 |
| 44 |
IS 4740 : 1979 |
Code of Practice for Packaging of Steel Tubes |
TED 24 |
| 45 |
IS 8857 : 1989 |
Canvas water bucket – Specification (first revision) |
TXD 20 |
| 46 |
IS 7517 : 1987 |
Specification for pedigree hatching boxes for poultry (First Revision) |
FAD 32 |
| 47 |
IS 3327 : 1982 |
Specification for Pedal - Operated Paddy Threshers (First Revision) |
FAD 11 |
| 48 |
IS 5135 : Part 1 : 1994 |
Specification for Hand - Rotary Duster : Part 1 Belly - Mounted Type (Second Revision) |
FAD 11 |
| 49 |
IS 9225 : 2018 |
Bicycle - Bicycle air pumps - Specification (First Revision) |
TED 16 |
| 50 |
IS 6734 : 1972 |
Specification for cut lath and lath nails |
PGD 37 |
| 51 |
IS 5593 : 1980 |
Specification for belt fasteners (Alligator Type) (First Revision) |
PGD 40 |
| 52 |
IS 10109 : 2018 |
Oil pressure stoves - Offset burner type - Specification (Second Revision) |
MED 26 |
| 53 |
IS 1342 : 2019 |
Oil pressure stoves - Specification (Seventh Revision) |
MED 26 |
| 54 |
IS 4948 : 2020 |
Welded Steel Wire Fabric for General Use - Specification ( Third Revision ) |
MED 10 |
| 55 |
IS 7813 : 1975 |
Specification for box, aluminium, rectangular |
MED 33 |
| 56 |
IS 7257 : 1973 |
Specification for trunks, steel, domestic |
MED 33 |
| 57 |
IS 726 : 1982 |
Specification for galvanized steel buckets for general use |
MED 33 |
| 58 |
IS 9246 : 1979 |
Specification for chapati machine |
MED 33 |
| 59 |
IS 1495 : 1970 |
Specification for mild steel dust - Bins (First Revision) |
MED 33 |
| 60 |
IS 2140 : 1978 |
Specification for stranded galvanized steel wire for fencing (First Revision) |
MED 10 |
| 61 |
IS 17614 : Part 9 : 2021 |
WATER QUALITY - SAMPLING Part 9 Guidance on sampling from marine waters |
CHD 36 |
| 62 |
IS 13811 : 1993 |
Air cargo (Bulk) trolley - Specification |
MED 7 |
| 63 |
IS 17799 : 2022 |
Unmanned Aerial Vehicles UAV - Drones for Agricultural Purposes |
TED 32 |
| 64 |
IS 7051 : 1973 |
Specification for Power Maize Shellers |
FAD 20 |
| 65 |
IS/IEC/TS 63042 : Part 301 : 2018 |
UHV AC TRANSMISSION SYSTEMS Part 301: On-site acceptance tests |
ETD 48 |
| 66 |
IS 7763 : 1975 |
Specification for extractor, juice, domestic |
MED 33 |
| 67 |
IS 723 : 1972 |
Specification for steel countersunk head wire nails (First Revision) |
PGD 37 |
| 68 |
IS 17881 : Part 2 : 2022 |
Protective clothing against heat and flame - Part 2 Skin burn injury prediction - Calculation requirements and test cases |
TXD 32 |
| 69 |
IS 13071 : 1991 |
Rubber hose,wire reinforced for sand and gravelsuction and discharge services - Specification |
PCD 13 |
| 70 |
IS 4521 : 2001 |
Wire ropes used in oil wells and oil well drilling - Specification (Second Revision) |
MED 10 |
| 71 |
IS 16014 : 2018 |
Mechanically woven, double - Twisted, hexagonal wire mesh gabions, revet mattresses, rock fall netting and other products for civil engineering purposes (Galvanized Steel Wire Or Galvanized Steel Wire With Polymer Coating) - Specification (First Revision) |
MED 10 |
