| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 15931 : 2012 |
Solid Panel Foam UPVC Door Shutters - Specification |
CED 11 |
| 2 |
IS 8255 : 1976 |
Specification for flexible load rearing polyurethane foam components for vehicles |
PCD 13 |
| 3 |
IS 11884 : 1986 |
Specification for Fire - Resistant Brattice Sheeting Made from Unsupported Plastics |
TXD 33 |
| 4 |
IS 11352 : 2018 |
Flexible pouches for the packing of vanaspati up to 2 kg or 2 litres - Specification (Third Revision) |
PCD 21 |
| 5 |
IS 12724 : 2004 |
Flexible pouches for packing of refined edible oils up to 5 kg or 5 litre - Specification (First Revision) |
PCD 21 |
| 6 |
IS 14129 : 1994 |
Flexible packaging materials for the packing of vanaspati in 10 kg and 15 kg packs - Specificaiton |
PCD 21 |
| 7 |
IS 14636 : 1998 |
Flexible packaging materials for packaging of edible oils, ghee and vanaspati |
PCD 21 |
| 8 |
IS 15609 : 2005 |
Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification |
PCD 21 |
| 9 |
IS 15749 : 2007 |
Fluorinated HDPE bottles and containers - Specification |
PCD 21 |
| 10 |
IS 2798 : 1998 |
Methods of test for plastics containers (First Revision) |
PCD 21 |
| 11 |
IS 10171 : 1999 |
Guide on suitability of plastics for food packaging (Second Revision) |
PCD 21 |
| 12 |
IS 1300 : 1994 |
Phenolic moulding materials - Specification (Third Revision) |
PCD 12 |
| 13 |
IS 13193 : 1992 |
Polyalkylene terephthalates (pet and pbt) for moulding and extrusion - Specification |
PCD 12 |
| 14 |
IS 13410 : 1992 |
Glass reinforced polyester sheet moulding compounds(smc) - Specification |
PCD 12 |
| 15 |
IS 13411 : 1992 |
Glass reinforced polyester dough moulding compounds - Specification |
PCD 12 |
| 16 |
IS 13464 : 1992 |
Polyamide (nylon 66) materials for moulding and extrusion - Specification |
PCD 12 |
| 17 |
IS 13577 : 1992 |
Positive list of constituents of ethylene methacrylic acid (emaa) copolymers and terpolymers in contact with foodstuffs, pharmaceuticals and drinking water |
PCD 12 |
| 18 |
IS 13960 : 1994 |
Thermoplastic strappings - Specification |
PCD 12 |
| 19 |
IS 14182 : 1994 |
Solvent cement for use with unplasticized polyvinyl chloride plastic pipe and fittings - Specifications |
PCD 12 |
| 20 |
IS 14421 : 1997 |
Plasticizer esters - Specification |
PCD 12 |
| 21 |
IS 14426 : 1997 |
Chlorinated paraffins (cp) - Specification |
PCD 12 |
| 22 |
IS 14500 : 1998 |
Linear low-density polyethylene (lldpe) films - Specification |
PCD 12 |
| 23 |
IS 14535 : 1998 |
Recycled plastics for the manufacturing of products - Designation |
PCD 12 |
| 24 |
IS 14635 : 1999 |
Polytetrafluoroethylene (Ptfe) materials for moulding and extrusion - Specification |
PCD 12 |
| 25 |
IS 14752 : 2000 |
Melamine formaldehyde resins to improve wet strength of paper - Specification |
PCD 12 |
| 26 |
IS 14319 : 1995 |
Laminated paper board pack for vanaspati - Specification |
CHD 16 |
| 27 |
IS 15621 : 2005 |
Tetrabromobisphenol-a - Specification |
PCD 12 |
| 28 |
IS 2543 : 1995 |
Cellulose secondary acetate materials for moulding and extrusion - Specification (First Revision) |
PCD 12 |
| 29 |
IS 3389 : 1994 |
Urea-formaldehyde moulding materials - Specification (First Revision) |
PCD 12 |
| 30 |
IS 3395 : 1997 |
Low density polyethylene (Ldpe) and linear low density polyethylene (Lldpe) materials for moulding and extrusion - Specification (Second Revision) |
PCD 12 |
| 31 |
IS 3669 : 1994 |
Melamine-formaldehyde moulding materials - Specification (First Revision) |
PCD 12 |
| 32 |
IS 3693 : 1966 |
Specification for plastic spectacle frames |
PCD 12 |
| 33 |
IS 3730 : 1988 |
Specification for high density polyethylene bucket (First Revision) |
PCD 12 |
| 34 |
IS 4761 : 1968 |
Specification for unsupported pvc rainwear |
PCD 12 |
| 35 |
IS 5210 : 1995 |
High impact polystyrene sheet - Specification (First Revision) |
PCD 12 |
| 36 |
IS 5322 : 1988 |
Specification for high density polyethylene wash-bowls (First Revision) |
PCD 12 |
| 37 |
IS 5378 : 1994 |
Polyethylene cane - Specification (First Revision) |
PCD 12 |
| 38 |
IS 7166 : 1985 |
Specification for cellulose secondary acetate flakes (First Revision) |
PCD 12 |
| 39 |
IS 9220 : 1979 |
Specification for tableware made of melamine plastics |
PCD 12 |
| 40 |
IS 9766 : 1992 |
Flexible pvc compounds - Specification (First Revision) |
PCD 12 |
| 41 |
IS 2076 : 1981 |
Specification for unsupported flexible polyvinyl chloride sheeting (First Revision) |
PCD 12 |
| 42 |
IS 13360 : Part 10 : Sec 7 : 2004 |
Plastics - Methods of testing: Part 10 resin (ThermosettlNg Properties) section 7 phenol - Formaldehyde mouldings - Determination of acetone - Soluble matter (Apparent Resin Content Of Material In The Unmoulded State) |
PCD 27 |
| 43 |
IS 13360 : Part 1 : 1992 |
Plastics - Methods of testing: Part 1 introduction |
PCD 27 |
| 44 |
IS 13360 : Part 2 : Sec 1 : 2016 |
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens Section 1 plastics - Compression moulding of test specimens of thermoplastic materials (First Revision) |
PCD 27 |
| 45 |
IS 13360 : Part 2 : Sec 10 : 2006 |
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens section 10 injection moulding of test specimens of thermosetting powder moulding compounds (Pmcs) - General principles and moulding of multipurpose test specimens |
PCD 27 |
| 46 |
IS 13360 : Part 2 : Sec 11 : 2006 |
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens section 11 injection moulding offest specimens of thermosetting powder moulding compounds (Pmcs) - Small plates |
PCD 27 |
| 47 |
IS 13360 : Part 5 : Sec 12 : 2017 |
Plastics - Methods of testing: Part 5 mechanical properties section 12 determination of hardness - Ball indentation method (First Revision) |
PCD 27 |
| 48 |
IS 13360 : Part 5 : Sec 13 : 1992 |
Plastics - Methods of testing: Part 5 mechanical properties section 13 determination of rockwell hardness |
PCD 27 |
| 49 |
IS 4669 : 1968 |
Methods of test for polyvinyl chloride resins |
PCD 27 |
| 50 |
IS 7188 : 1974 |
Methods of test for cellulose acetate flakes |
PCD 27 |
| 51 |
IS 8543 : Part 1 : Sec 1 : 1978 |
Methods of testing plastics: Part 1 characterization of polymer structure and size section 1 determination of molecular mass from viscosity |
PCD 27 |
| 52 |
IS 8543 : Part 13 : Sec 1 : 1977 |
Methods of testing plastics: Part 13 tests for specific products section 1 buttons (Thermosetting) |
PCD 27 |
| 53 |
IS 10106 : Part 2 : Sec 3 : 1984 |
Packaging code: Part 2 packaging materials section 3 plastics materials |
TED 24 |
| 54 |
IS 10106 : Part 4 : Sec 3 : 1984 |
Packaging code: Part 4 packages section 3 plastics |
TED 24 |
| 55 |
IS 17300 : 2019 |
Textile glass – Yarns – Designation |
TXD 40 |
| 56 |
IS 7328 : 2020 |
Specification for polyethylene material for moulding and extrusion (Third Revision) |
PCD 12 |
| 57 |
IS 14635 : Part 1 : 2020 |
Fluoropolymer dispersions and moulding and extrusion materials : Part 1 designation system (First Revision) |
PCD 12 |
| 58 |
IS 13360 : Part 8 : Sec 8 : 2018 |
Plastics - Methods of testing: Part 8 permanence/chemical properties section 8 determination of ash - General methods (First Revision) |
PCD 27 |
| 59 |
IS 8359 : 1993 |
Urea Ammonium Phosphate Based Fertilizers |
FAD 7 |
| 60 |
IS 8598 : 1987 |
Idler and Idler Sets for Belt Conveyor - Specification (Second Revision) |
MED 6 |
| 61 |
IS 14194 : Part 3 : 2021 |
Radionuclides in environmental samples - Method of estimation : Part 3 Uranium (First Revision) |
CHD 30 |
| 62 |
IS/ISO 17088 : 2012 |
Specifications for compostable plastics (First Revision) |
PCD 12 |
| 63 |
IS/ISO 17480 : 2015 |
Packaging — Accessible Design — Ease of Opening |
TED 24 |
| 64 |
IS 7933 : 1975 |
Specification for flexible polyurethane foam for domestic mattresses |
PCD 13 |
| 65 |
IS 17077 : Part 1 : 2019 |
Plastics - AcrylonitrileButadienestyrene (Abs) moulding and extrusion materials: Part 1 designation system and basis for specifications |
PCD 12 |
| 66 |
IS 17397 : Part 1 : 2020 |
Plastics — Thermoplastic Polyurethanes for Moulding and Extrusion Part 1 Designation System and Basis for Specifications |
PCD 12 |
| 67 |
IS 15475 : Part 3 : 2004 |
Code of recommended practice for amusement rides safety: Part 3 design, manufacture and erection |
MED 6 |
| 68 |
IS 2500 : Part 5 : 2021 |
Sampling procedures for inspection by attributes -- Part 4: Procedures for assessment of declared quality levels ( First Revision) |
MSD 3 |
| 69 |
IS 3958 : 2021 |
Methods Of Sampling Cosmetics |
|
| 70 |
IS 5508 : Part 16 : 2021 |
Guide for fishing gear Part 16: 450 m Purse seine (first revision) |
TXD 18 |
| 71 |
IS 13463 : 1992 |
Polyamide(Nylon 6) materials for moulding and extrusion specification |
PCD 12 |
| 72 |
IS 17550 : Part 2 : 2021 |
Household Refrigerating Appliance- Characteristics and test methods Part 2 Performance requirements |
MED 3 |
| 73 |
IS 17550 : Part 3 : 2021 |
Household Refrigerating Appliance- Characteristics and test methods Part 3 Energy Consumption and volume |
MED 3 |
| 74 |
IS 15680 : 2021 |
Guidelines for selection of steam traps First revision of IS 15680 |
MED 1 |
| 75 |
IS 17536 : Part 3 : 2021 |
Ships and marine technology - Servicing of inflatable life-saving appliances - Part 3: Inflatable lifejackets |
TED 19 |
| 76 |
IS 17585 : 2021 |
Beta (Outflow) valves for gravity type flushing cisterns - Specification |
CED 3 |
| 77 |
IS 17589 : 2021 |
Specification for Water Packs for use as ice-packs, cool-packs and warm-packs, Requirements and Test methods |
MHD 12 |
| 78 |
IS 17668 : 2021 |
Infant formula and adult nutritionals Determination of free and total choline and free and total carnitine Liquid chromatography tandem mass spectrometry HPLC-MSMS |
FAD 28 |
| 79 |
IS/ISO 18758 : Part 1 : 2018 |
Mining and earth-moving machinery Rock drill rigs and rock reinforcement rigs Part 1: Vocabulary Adoption of ISO 18758 |
MED 21 |
| 80 |
IS/IEC 61744 : 2005 |
CALIBRATION OF FIBRE OPTIC CHROMATIC DISPERSION TEST SETS |
LITD 11 |
| 81 |
IS 2080 : 2021 |
Specification for stabilized hydrogen peroxide First Revision |
CHD 1 |
| 82 |
IS 14534 : 2016 |
Plastics - Guidelines for the recovery and recycling of plastics waste (First Revision) |
PCD 12 |
| 83 |
IS 13289 : 1993 |
Polypropylene/impact copolymer (Ppcp) crates for milk satchets - Specification |
PCD 21 |
| 84 |
IS 6307 : 1985 |
Specification for rigid pvc sheets (First Revision) |
PCD 12 |
| 85 |
IS 1843 : 1963 |
Specification for nylon monofilaments |
PCD 12 |
| 86 |
IS 11434 : 1985 |
Specification for ionomer resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water z |
PCD 12 |
| 87 |
IS 11704 : 1986 |
Specification for ethylene acrylic acid (Eaa) copolymers for their safe use in contact with food - Stuffs, pharmaceuticals and drinking water |
PCD 12 |
| 88 |
IS 13360 : Part 6 : Sec 10 : 2013 |
Plastics - Methods of testing: Part 6 thermal properties section 10 determination of melting behaviour (Melting Temperature Or Melting Range) of semi - Crystalline polymers by capillary tube and polarizing - Microscope methods (First Revision) |
PCD 27 |
| 89 |
IS 6604 : 1991 |
Code for packaging of solid pesticides (Up To 1000g) (First Revision) |
PCD 21 |
| 90 |
IS 9591 : 1996 |
Plasticizer esters - Methods of sampling and tests (First Revision) |
PCD 27 |
| 91 |
IS 17861 : 2022 |
TEXTILE BOOTS WITH POLYMERIC SOLE JUNGLE BOOTS - SPECIFICATION Third Revision |
CHD 19 |
| 92 |
IS 2600 : Part 6 : 2022 |
METHODS OF CHEMICAL ANALYSIS OF ZINC AND ZINC BASE ALLOYS FOR DIE CASTINGS (PART6) DETERMINATION OF MAGNESIUM BY ATOMIC ABSORPTION SPECTROMETRIC METHOD First Revision |
MTD 34 |
| 93 |
IS 11273 : 1992 |
Woven roving fabrics of 'E' glass fibre |
TXD 40 |
| 94 |
IS 11320 : 1997 |
Glass fibre rovings for the reinforcement of polyester and of epoxide resin systems - Specification (First Revision) |
TXD 40 |
| 95 |
IS 11551 : 1996 |
Glass fibre chopped strand mat for the reinforcement of epoxy, phenolic and polyesterresin systems - Specification (First Revision) |
TXD 40 |
| 96 |
IS 13959 : 1994 |
Polypropylene sutll - Specification |
TXD 9 |
| 97 |
IS 11435 : 1985 |
Positive list of constituents of ionomer resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water |
PCD 12 |
| 98 |
IS 11705 : 1986 |
PositlVe list of constituents of ethylene/acrylic acid (Eaa) copolymers for their safe use in contact with foodstuffs, pharmaceuticals and drinking water |
PCD 12 |
| 99 |
IS 17675 : Part 3 : 2021 |
Guidelines for Treated Wastewater Use for Irrigation Projects Part 3 Components of a Reuse Project for Irrigation |
EED 2 |
| 100 |
IS 19018 : 2022 |
Svarnapatri Cassia senna L Leaves for use in Traditional Medicine Specifications |
AYD 1 |
| 101 |
IS 1461 : 1984 |
Specification for plastic buttons (thermosetting) (Second Revision) |
PCD 12 |
| 102 |
IS 12247 : 1988 |
Specification for nylon-6 polymer for its safe use in contact with foodstuffs pharmaceuticals and drinking water |
PCD 12 |
| 103 |
IS 14995 : 2001 |
Stretch cling films - Specification |
PCD 12 |
| 104 |
IS 10661 : 1983 |
Specification for glass fibre reinforced polyester chemical resistant tanks |
MED 17 |
| 105 |
IS 11805 : 2007 |
Polyethylene pouches for packaging liquid milk - Specification (Second Revision) |
PCD 21 |
| 106 |
IS 16630 : Part 2 : 2017 |
Plastics — Post-Consumer Poly(Ethylene Terephthalate) (PET) Bottle Recyclates Part 2 Preparation of Test Specimens and Determination of Properties |
PCD 12 |
| 107 |
IS 8958 : 2023 |
Fluchloralin, technical concentrates- Specification First Revision |
FAD 1 |
| 108 |
IS 11584 : 1986 |
Specification for high density polyethylene (HDPE) crates for milk satchets |
PCD 21 |
