Home About Standards Downloads Reports Standard Of The Week Standard Of The Month FAQ Contact Us
�

Indian Standard Details

    Print

Basic Details
IS Number : IS 2825 : 1969
Reviewed In : 2022
IS Title [Eng-Hn] : Code for unfired pressure vessels
No of Revision : 0
No of Amendments : 5
Technical Department : Mechanical Engineering Department
Technical Committee : MED 1 ( Boilers And Pressure Vessels )
Language : English

Classification Details
Group : Gases, Gas Cylinders , Machine tools and other mechanical products
Sub Group: Industrial and other gases, Gas Cylinders and Fittings, boilers and pressure vessels
Sub Sub Group : Boilers & Unfired pressure vessel
Aspects: Code of Practice
Certification: None
Ministry :
Short Commom Man's Title: Code for unfired pressure vessels
Itchs:
Degree of Equivalence: Indigenous
Identical/Equivalent Standards:
Organisation :

Cross Referencing Details
Indian Standards Refered In IS IS 2825 : 1969 :
SNo IS Number Title Technical Committee
1
IS 288 : 1981 Specification for arsenical copper rods for boiler stay bolts and rivets (Fourth Revision) MTD 8
2
IS 291 : 1989 Naval brass rods and sections for machining purposes - Specification (Third Revision) MTD 8
3
IS 318 : 1981 Specification for leaded tin bronze ingots and castings (Second Revision) MTD 8
4
IS 320 : 1980 Specification for high tensile brass rods and sections (Other Than Forging Stock) (Second Revision) MTD 8
5
IS 407 : 1981 Specification for brass tubes for general purposes (Third Revision) MTD 8
6
IS 410 : 1977 Specification for cold rolled brass sheet, strip and foil (Third Revision) MTD 8
7
IS 617 : 1994 Cast aluminium and its alloys - Ingots and castings for general engineering purposes - Specification (Third Revision) MTD 7
8
IS 733 : 1983 Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision) MTD 7
9
IS 734 : 1975 Specification for wrought aluminium and aluminium alloy forging stock and forgings (For General Engineering Purposes) (Second Revision) MTD 7
10
IS 736 : 1986 Specification for wrought aluminium and aluminium alloy plate for general engineering purposes (Third Revision) MTD 7
11
IS 737 : 2008 Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes - Specification (Fourth Revision) MTD 7
12
IS 738 : 1994 Wrought aluminium alloys, drawn tube for general engineering purposes - Specification (Third Revision) MTD 7
13
IS 961 : 1975 Structural steel (high tensile) MTD 4
14
IS 1284 : 1975 Specification for wrought aluminium alloy bolt and screw stock (for general engineering purposes) (Second Revision) MTD 7
15
IS 1205 : 1978 Determination of Softening Point - (see IS 1201 to IS 1220) PCD 6
16
IS 1385 : 1968 Phosphor bronze rods and bars, sheet and strip and wire MTD 8
17
IS 1545 : 1994 Solid drawn copper and copper alloy tubes for condensers and heat exchangers - Specification (Third Revision) MTD 8
18
IS 1972 : 1989 Copper plate, sheet and strip for industrial purposes MTD 8
19
IS 1978 : 1982 Line Pipe MTD 19
20
IS 1979 : 1985 High Test Line Pipe MTD 19
21
IS 1990 : 2009 Steel rivet and stay bars for boilers (Second Revision) MTD 4
22
IS 2002 : 2009 Steel plate for pressure vessel for intermediate and high temperature service including boilers (Third Revision) MTD 4
23
IS 2004 : 1991 Carbon steel forgings for general engineering purposes - Specification (Third Revision) MTD 16
24
IS 2040 : 1962 Steel Bars For Staus MTD 4
25
IS 2041 : 2009 Steel plates for pressure vessels used at moderate and low temperature - Specification (Third Revision) MTD 4
26
IS 2062 : 2011 Hot rolled medium and high tensile structural steel - Specification (Seventh Revision) MTD 4
27
IS 2371 : 1973 Solid drawn copper alloy tubes for condensers, evaporators, heaters and cooler tubes using saline hard water MTD 8
28
IS 2416 : 1986 Specification for boiler and supherheater tubes for marine and naval purposes (First Revision) MTD 19
29
IS 2501 : 1995 Solid drawn copper tubesfor general engineering purposes - Specification (Third Revision) MTD 8
30
IS 2611 : 1964 Specification for carbon chromium molybdenum steel forgings for high temperature service MTD 16
31
IS 2856 : 1999 Carbon steel castings for pressure containing parts suitable for fusion welding - Specification (Fourth Revision) MTD 14
32
IS 3038 : 2006 Martensitic stainless steel and alloy steel castings for pressure containing parts suitable for high temperature service - Specification (Fourth Revision) MTD 14
33
IS 3444 : 1999 Corrosion resistant high alloy steel and nickel base castings for general applications - Specification (Third Revision) MTD 14
34
IS 3503 : 1966 Steel for marine boilers, pressure vessels and welded machinery structures MTD 4
35
IS 3609 : 1966 Chrome Molybdenum Steel, Seamless, Boiler And Superheater Tubes MTD 19
36
IS 3945 : 1966 Steel for naval purposes MTD 4
37
IS 4171 : 1983 Specification for copper rods and bars for general engineering purposes (First Revision) MTD 8
38
IS 812 : 1957 Glossary of terms relating to welding and cutting of metals MTD 11
39
IS 226 : 1975 Structural steel (Standard quality) MTD 4
40
IS 3039 : 1988 Specification for structural steel for construction of hulls of ships (Second Revision) MTD 4
41
IS 3658 : 1999 Code of practice for liquid penetrant flaw detection (Second Revision) MTD 21
42
IS 3703 : 2004 Recommended practice for magnetic particle flaw detection (Second Revision) MTD 21
43
IS 814 : 2004 Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision) MTD 11
44
IS 1278 : 1972 Specification for filler rods and wires for gas welding (Second Revision) MTD 11
45
IS 1395 : 1982 Specification for low and medium alloy steel covered electrodes for manual metal arc welding (Third Revision MTD 11
46
IS 2680 : 1964 Filler rods and wire for inert gas tungsten arc welding MTD 11
47
IS 3613 : 1974 Acceptance tests for wire flux combination for submerged arc welding MTD 11
48
IS 4972 : 1968 Specification for resistance spot - Welding electrodes MTD 11
49
IS 5206 : 1983 Specification for covered electrodes for manual metal arc welding of stainless steel and other similar high alloy steels (First Revision) MTD 11
50
IS 4049 : Part 1 : 1988 Specification for formed ends for tanks and pressure vessels: Part 1 based on outside diameter (Second Revision) MED 1
51
IS 554 : 1999 Pipe threads where pressure - Tight joints are made on the threads - Dimensions, tolerances and designation (Fourth Revision) PGD 37
52
IS 2643 : 2005 Pipe threads where pressure - Tight joints are not made on the threads - Dimensions, tolerances and designation (Third Revision) PGD 37
53
IS 3333 : Part 1 : 1967 Dimensions for petroleum industry pipe threads: Part 1 Line pipe threads PGD 37
54
IS 4864 to 4870 : 1968 Specification for shell flanges for vessels and equipment MED 17
55
IS 4503 : 1967 Specification for shell and tube type heat exchangers MED 1
56
IS 800 : 2007 General construction in steel - Code of practice (Third Revision) CED 7
57
IS 456 : 2000 Plain and reinforced concrete - Code of practice (Fourth Revision) CED 2
58
IS 3400 : Part 2 : 2014 Methods of test for vulcanized rubber: Part 2 rubber, vulcanized or thermoplastic - Determination of hardness (Hardness Between 10 Irhd And 100 Irhd) (Fourth Revision) PCD 29
59
IS 2811 : 1987 Recommendations for manual tungsten inert - Gas arc welding of austenitic stainless steel (First Revision) MTD 11
60
IS 4944 : 1968 Code of practice for welding at low ambient temperature MTD 12
61
IS 818 : 1968 Code of practice for safety and health requirements in electric and gas welding and cutting operations (First Revision) MTD 11
62
IS 3016 : 1982 Code of practice for fire precautions in welding and cutting operations (First Revision) MTD 11
63
IS 2812 : 1993 Recommendations for manual tungsten inert gas arc welding of aluminium and aluminium alloys (First Revision) MTD 11
64
IS 815 : 1974 Classification coding of covered electrodes for metal arc welding of structural steels MTD 11
65
IS 1608 : 2005 Mechanical testing of metals - Tensile Testing MTD 3
66
IS 1757 Part 1 : 2020 Metallic Materials — Charpy Pendulum Impact Test Part 1 Test Method ( Fourth Revision ) MTD 3
67
IS 1599 : 2019 Metallic materials - Bend test (Fourth Revision) MTD 3
68
IS 2595 : 2008 Industrial radiographic testing - Code of practice (Second Revision) MTD 21
69
IS 3657 : 2018 Specification for radiographic image quality indicators (Second Revision) MTD 21
70
IS 1182 : 1983 Recommended - Practice for radiographic examination of fusion welded butt joints in steel plates (Second Revision) MTD 21
71
IS 4853 : 1982 Recommended practice for radiographic inspection of fusion welded butt joints in steel pipes (First Revision) MTD 21
72
IS 3664 : 1981 Code of practice for ultrasonic pulse echo testing by contact and immersion methods (first revision) MTD 21
73
IS 4260 : 2004 Recommended practice for ultrasonic testing of butt welds in ferritic steel (Third Revision) MTD 21
74
IS 2598 : 1966 Safety code for industrial radiographic practice MTD 21
International Standards Refered In IS 2825 : 1969 Standard contains no Cross Referenced International Standard.
IS 2825 : 1969 is Refered in following Indian Standards :
SNo IS Number Title Technical Committee
1 IS 10987 : 1992 Code of Practice for Design, Fabrication, Testing and Installation of Under - Ground/Above - Ground Horizontal CylindricalSteel Storage Tanks for Petroleum Products (First Revision) CED 7
2 IS 11833 : 1986 Specification For Dry Powder Fire Extinguisher For Metal Fires CED 22
3 IS 11108 : 1984 Specification for portable fire extinguishers - Halon 1211 type CED 22
4 IS 4862 : Part 1 : 1986 Specification for portable fire extinguisher for aircraft: Part 1 halon 1211 type (First Revision) CED 22
5 IS 2683 : 1980 Guide for installation of impregnation plants for timber CED 9
6 IS 3196 : Part 1 : 2013 Welded low carbon steel cylinders exceeding 5 litres water capacity for low pressure liquefiable gases: Part 1 cylinders for liquefied petroleum gases (Lpg) - Specification (Sixth Revision) MED 16
7 IS 11639 : Part 2 : 1995 Structural destgn of penstocks - Criteria: Part 2 buried/embedded penstocks in rock WRD 14
8 IS 11639 : Part 3 : 1996 Structural design of penstock - Criteria: Part 3 specials for penstocks WRD 14
9 IS 3196 : Part 2 : 2006 Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gases: Part 2 cylinders for liquefiable non - Toxic gases other than lpg - Specification (First Revision) MED 16
10 IS 3196 : Part 3 : 2012 Welded low carbon steel cylinder exceeding 5 litre water capacity for low pressure liquefiable gases: Part 3 methods of test (First Revision) MED 16
11 IS 3196 : Part 4 : 2001 Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gases - Specification: Part 4 cylinders for toxic and corrosive gases MED 16
12 IS 9349 : 2006 Recommendations for structural design of medium and high head slide gates (Second L?evision) WRD 12
13 IS 10096 : Part 1 : Sec 1 : 2014 RecommendanOns for inspection; testing and maintenance of radial gates and their hoists: Part i inspection, testing and assembly at the manufacturing stage: Sec i gates WRD 12
14 IS 10210 : 1993 CrlTeria for design of hydraulic hoists for gates (First Revision) WRD 12
15 IS 8471 : 2003 Acetylene generators - Requirements (First Revision) MED 16
16 IS 7312 : 2018 Welded and seamless steel dissolved acetylene gas cylinders - Specification (Third Revision) MED 16
17 IS 13124 : 1993 Reciprocating gas compressors - Technical supply conditions MED 22
18 IS 15729 : 2007 Natural gas pressure regulating and metering terminal - Code of practice MED 17
19 IS 13187 : 1991 Road tankers for light petroleum products - Specification MED 17
20 IS 13159 : Part 1 : 1993 Pipe flanges and flanged fittings specification: Part 1 dimensions MED 17
21 IS 12992 : Part 1 : 1993 Safety relief valves - Spring loaded - Specification: Part 1 design MED 17
22 IS 10605 : 1989 Steel globe valves (Flanged And Butt Welded Ends) for petroleum, petrochemical and allied industries - Specification (First Revision) MED 17
23 IS 4682 : Part 4 : 1998 Code of practice for lining of vessels and equipment for chemical processes: Part 4 lining with sheet thermoplastics (First Revision) MED 17
24 IS 4682 : Part 1 : 1994 Code of practice for lining of vessels and equipment for chemical processes: Part 1 rubber lining (First Revision) MED 17
25 IS 4092 : Part 1 : 1992 Centrifuges of the basket and bowl and vibrating type for use in industrial and commercial applications: Part 1 general requirements (Second Revision) MED 17
26 IS 4049 : Part 2 : 1996 Formed ends for tanks and pressure vessels - Specification: Part 2 inside diameter basis (First Revision) MED 1
27 IS 2825 : 1969 Code for unfired pressure vessels MED 1
28 IS 14899 : 2014 Liquefied petroleum gas (LPG) containers for automotive use - Specification (First Revision) MED 16
29 IS 4682 : Part 2 : 1969 Code of practice for lining of vessels and equipment for chemical processes: Part 2 glass enamel lining MED 17
30 IS 4682 : Part 3 : 1969 Code of practice for lining of vessels and equipment for chemical processes: Part 3 lead lining MED 17
31 IS 4682 : Part 5 : 1970 Code of practice for lining of vessels - And equipment for chemical processes: Part 5 epoxide resin lining MED 17
32 IS 4682 : Part 7 : 1974 Code of practice for lining of vessels and equipment for chemical processes: Part 7 corrosion and heat resistant metals MED 17
33 IS 4682 : Part 8 : 1974 Code of practice for lining of vessels and equipment for chemical processes Part 8 Precious metal MED 17
34 IS 9522 : 1980 Code of practice for agitator equipment MED 17
35 IS 9618 : 1980 Specification for road tankers for liquefied petroleum gas MED 17
36 IS 10470 : 1983 Specification for air cooled heat exchangers MED 1
37 IS 13629 : 2004 Textile machinery – Stainless steel drying cylinders used in textile processing – Specification (first revision) TXD 14
38 IS 4353 : 1995 Submerged arc welding of mild steel and low alloy steels - Recommendations (First Revision) MTD 11
39 IS 10746 : Part 2 : 1983 Specification for shell and tube type marine heat exchangers: Part 2 general requirements TED 19
40 IS 15053 : 2001 Shipbuilding - Hydraulic steering gears for vessels below 500 grt - General requirements TED 19
41 IS 15324 : 2003 Shipbuilding - Selection and testing of air starting systems - Code of practice TED 19
42 IS 12047 : 1987 Specification for Oil Seed Cookers / kettles, Horizontal Type FAD 13
43 IS 3829 : Part 1 : 1999 Specification for steam sterilizers: Part 1 horizontal cylindrical and horizontal rectangular steam sterilizers, pressure type (For Hospital And Pharmaceutical Use) (Second Revision) MHD 12
44 IS 2829 : 2019 Steam - Jacketed ghee pans / boilers (?Stainless?Steel?)? - ?Specification (Second Revision) FAD 33
45 IS 4576 : 2018 Liquefied Petroleum Gases — Specification ( Third Revision ) PCD 3
46 IS 6044 : Part 2 : 2001 Code of practice for liquefied petroleum gas storage installations: Part 2 commercial, industrial and domestic bulk storage installations (First Revision) MED 16
47 IS 11428 : Part 1 to 3 : 1985 Specification for wrought carbon steel butt - Welding pipe fittings MTD 19
48 IS 13673 : Part 2 : 2021 Expression of Performance of Electrochemical Analyzers Part 2 pH Value ( First Revision ) ETD 18
49 IS 11330 : 1985 Specification for refrigeration oil separator MED 3
50 IS 12249 : 1987 Specification for desiccant driers MED 3
51 IS 11563 : 1986 Technical supply conditions for dynamic compressors MED 22
52 IS 11891 : 1986 Specification for lubrication and oil seal system for dynamic compressors MED 22
53 IS 7938 : 1976 Specification for air receivers for compressed air installation MED 22
54 IS 17614 : Part 15 : 2021 Water quality -Sampling- Part 15 Guidance on the preservation and handling of sludge and sediment samples CHD 36
55 IS 11780 : 1986 Code for selection and testing of rotary screw air compressor (Oil Flooded) MED 22
56 IS 12258 : 1987 Technical supply condition for air screw compressors (Oil Flooded) for general purpose and industrial applications MED 22
57 IS 6206 : 1985 Guide for selection, installation and maintenance of air compressor plants with operating pressures up to 10 bars (First Revision) MED 22