| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 7224 : 2006 |
Iodized salt, vacuum evaporated iodized salt and refined iodized salt - Specification (Second Revision) |
FAD 8 |
| 2 |
IS 5278 : 1969 |
Specification for dicofol, technical |
FAD 1 |
| 3 |
IS 1942 : 1968 |
Specification for bone - Meal as Poultry feed supplement (First Revision) |
FAD 5 |
| 4 |
IS 1675 : 1971 |
Specification for stearic acid, technical (First Revision) |
FAD 13 |
| 5 |
IS 4457 : 2007 |
Ceramic unglazed vitreous acid resisting tiles - Specification (Second Revision) |
CED 5 |
| 6 |
IS 308 : 1988 |
Specification for Dissolved Acetylene (Gas) (Third Revision) |
CHD 6 |
| 7 |
IS 11497 : 2014 |
Catheter, Foley’s Rubber, for Prolonged Urinary Drainage — Specification |
MHD 1 |
| 8 |
IS 12423 : 1988 |
Method for Colorimetric analysis of Hydraulic Cement |
CED 2 |
| 9 |
IS 4860 : 1968 |
Specification for acid - Resistant bricks |
CED 5 |
| 10 |
IS 4032 : 1985 |
Method of Chemical Analysis of Hydraulic Cement (First Revision) |
CED 2 |
| 11 |
IS 6932 : Part 1 : 1973 |
Method of test for building limes Part 1 Determination of insoluble residue, loss on ignition, insoluble matter, silicone dioxide, ferric and aluminium oxide, calcium oxide and magnesium oxide |
CED 4 |
| 12 |
IS 12813 : 1989 |
Method of Analysis of Hydraulic Cement by Atomic Absorption Spectrophotometer |
CED 2 |
| 13 |
IS 1448 : Part 79 : 1992 |
Methods of test for petroleum and its products [ P: 79 ] determination of trace element in petroleum products - Vanadium (First Revision) |
PCD 1 |
| 14 |
IS 9700 : 1991 |
Activated alumina - Specification (First Revision) |
CHD 1 |
| 15 |
IS 11153 : 1996 |
Manganese dioxide for dry batteries - Specification (First Revision) |
CHD 1 |
| 16 |
IS 11673 : 1992 |
Sodium hypochlorite solution - Specification (First Revision) |
CHD 1 |
| 17 |
IS 12612 : 1988 |
Method for Colorimetric - determinatxon of tungsten |
CHD 1 |
| 18 |
IS 12478 : 1988 |
Specification for ammonium sulphate,technical |
CHD 1 |
| 19 |
IS 13318 : 1992 |
Spectrophotometric determination of nickel test |
CHD 1 |
| 20 |
IS 13320 : 1992 |
Determination of iron by atomic absorption spectrophotometry - Test method |
CHD 1 |
| 21 |
IS 13425 : 1992 |
Ammonium nitrate for nitrous oxide production - Specification |
CHD 1 |
| 22 |
IS 14212 : 1995 |
Sodium and potassium silicates - Method of test |
CHD 1 |
| 23 |
IS 14305 : 1995 |
Basiclead carbonate - Specification |
CHD 1 |
| 24 |
IS 9497 : 1980 |
Method for determination of sodium and potassium (Flame Photometric) |
CHD 1 |
| 25 |
IS 9931 : 1981 |
Mercurimetric method for determination of chloride in inorganic chemicals |
CHD 1 |
| 26 |
IS 10125 : 1982 |
Specification for copper carbonate |
CHD 1 |
| 27 |
IS 3006 : 1979 |
Specification for chemically resistant glazed stoneware pipes and fittings (first revision) |
CED 3 |
| 28 |
IS 10895 : 1984 |
Specification for copper nitrate |
CHD 1 |
| 29 |
IS 11112 : 1984 |
SpecificatlOn for alumina, chromatographic grade |
CHD 1 |
| 30 |
IS 11123 : 1984 |
Method for determination of copper by atomic absorption spectrophotometry |
CHD 1 |
| 31 |
IS 11124 : 1984 |
Method for atomic absorption spectrophotometric determination of arsenic |
CHD 1 |
| 32 |
IS 12041 : 1987 |
Method for the determination of mercury by atomic absorption spectrophotometer |
CHD 1 |
| 33 |
IS 12042 : 1987 |
Method for determination of molybdenum by atomic absorption spectrophotometer |
CHD 1 |
| 34 |
IS 12074 : 1987 |
Method for determination of lead by atomic absorption spectrophotometer |
CHD 1 |
| 35 |
IS 11236 : 1985 |
Specification for manganese acetate |
CHD 1 |
| 36 |
IS 11237 : 1985 |
Specification for manganese carbonate |
CHD 1 |
| 37 |
IS 8325 : 1983 |
Specification for nickel formate for nickel catalyst (First Revision) |
CHD 1 |
| 38 |
IS 8814 : 1978 |
Specification for sodium metal |
CHD 1 |
| 39 |
IS 5759 : 2006 |
Antifreeze coolant - Specification (Second Revision) |
PCD 25 |
| 40 |
IS 1813 : 1961 |
Code of Practice for Treatment of Water for Marine Boilers |
CHD 13 |
| 41 |
IS 2317 : 1975 |
Method for gravimetric determination of sulphates (First Revision) |
CHD 1 |
| 42 |
IS 2723 : 1985 |
Specification for ammonium bromide, pure and analytical reagent (First Revision) |
CHD 1 |
| 43 |
IS 2780 : 1964 |
Specification for sodium bromide, pure |
CHD 1 |
| 44 |
IS 2881 : 1984 |
Specification for barytes for chemical industry and oil - Well drilling (Second Revision) |
CHD 1 |
| 45 |
IS 3205 : 1984 |
Specification for precipitated barium carbonate, technical (First Revision) |
CHD 1 |
| 46 |
IS 2797 : 1998 |
Potassium bromide - Specification (Third Revision) |
CHD 1 |
| 47 |
IS 6301 : 2013 |
Basic chromium sulphate (For Tanning) - Specification (First Revision) |
CHD 17 |
| 48 |
IS 7223 : 1986 |
Specification for potassium chloride, analytical reagent (First Revision) |
CHD 1 |
| 49 |
IS 877 : 1989 |
Activated carbons, powdered and granular - Methods of sampling and test (Second Revision) |
CHD 1 |
| 50 |
IS 5301 : 1987 |
Sodium Chlorate |
CHD 1 |
| 51 |
IS 1314 : 1984 |
Specification for calcium chloride (Second Revision) |
CHD 1 |
| 52 |
IS 879 : 1981 |
Specification for sodium nitrite (First Revision) |
CHD 1 |
| 53 |
IS 1078 : 1987 |
Specification for copper naphthenate (Second Revision) |
CHD 1 |
| 54 |
IS 1113 : 1965 |
Specification for ammonium chloride, technical and pure (Revised) |
CHD 1 |
| 55 |
IS 6186 : 1986 |
Specification for bentonite (First Revision) |
CHD 1 |
| 56 |
IS 12437 : 1988 |
Specification for zirconium powder for use in explosive and pyrotechnic industry |
CHD 26 |
| 57 |
IS 13524 : 1992 |
Potassium Perchlorate for Explosives and Pyrotechnic Compositions specification |
CHD 26 |
| 58 |
IS 7633 : 1982 |
Specification for calcium carbonate for explosive and pyrotechnic industry (First Revision) |
CHD 26 |
| 59 |
IS 8063 : 1976 |
Specification for red lead for explosive and pyrotechnic industry |
CHD 26 |
| 60 |
IS 10821 : 1984 |
Specification for calcium nitrate for explosive industry |
CHD 26 |
| 61 |
IS 4396 : 1981 |
Specification for barium nitrate for explosive and pyrotechnic compositions (First Revision) |
CHD 26 |
| 62 |
IS 4668 : 1985 |
Specification for ammonium nitrate for explosives (First Revision) |
CHD 26 |
| 63 |
IS 2012 : 2006 |
Red phosphorus - Specification (First Revision) |
CHD 26 |
| 64 |
IS 2307 : 2004 |
Magnesium powder for explosive and pyrotechnic compositions - Specification (Second Revision) |
CHD 26 |
| 65 |
IS 438 : 2006 |
Aluminium powder for explosives and pyrotechnic compositions - Specification (Second Revision) |
CHD 26 |
| 66 |
IS 708 : 1987 |
Specification for potassium chlorate for explosive and pyrotechnic industry (Second Revision) |
CHD 26 |
| 67 |
IS 1091 : 1985 |
Specification for Nitrocellulose |
CHD 26 |
| 68 |
IS 6609 : Part 1 : 1972 |
Methods of test for commercial blasting explosives and accessories: Part 1 gun powder |
CHD 26 |
| 69 |
IS 5670 : 1984 |
Specification for lead thiocyanate for explosive and pyrotechnic compositions (First Revision) |
CHD 26 |
| 70 |
IS 5671 : 1984 |
Specification for strontium nitrate for pyrotechnic compositions (First Revision) |
CHD 26 |
| 71 |
IS 5713 : 1981 |
Specification for manganese dioxide for explosive and pyrotechnic compositions (First Revision) |
CHD 26 |
| 72 |
IS 5731 : 1970 |
Specification for antimony sulphide for explosive and pyrotechnic compositions |
CHD 26 |
| 73 |
IS 11491 : 1985 |
Specification for blasting soluble nitrocellulose for explosives industry |
CHD 26 |
| 74 |
IS 1741 : 2019 |
Latex foam rubber products - Specification (First Revision) |
PCD 13 |
| 75 |
IS 1685 : 1975 |
Specification for whiting for rubber industry (First Revision) |
PCD 13 |
| 76 |
IS 301 : 1982 |
Specification for potassium nitrate for explosive and pyrotechnic compositions (Second Revision) |
CHD 26 |
| 77 |
IS 5193 : 1998 |
Rubber sealing rings for domestic fruit and vegetable preserving jars specification (First Revision) |
PCD 13 |
| 78 |
IS 266 : 1993 |
Sulphuric acid - Specification (Third Revision) |
CHD 1 |
| 79 |
IS 701 : 1966 |
Specification for zinc chloride (Revised) |
CHD 1 |
| 80 |
IS 8862 : 1978 |
Specification for titanium dioxide (Anatase Type) for rubber industry |
PCD 13 |
| 81 |
IS 4611 : 1991 |
Metallic zinc powder (Zinc Dust) - Specification (Second Revision) |
CHD 1 |
| 82 |
IS 12551 : 1988 |
Specification for potassium pyrophosphate for electroplating |
CHD 5 |
| 83 |
IS 12557 : 1988 |
Specification for sodium pyrophosphate for electroplating |
CHD 5 |
| 84 |
IS 12865 : 1989 |
Potassium persulphate, photographic grade - Specification |
CHD 5 |
| 85 |
IS 13106 : 1991 |
Potassium bromide, photographic grade |
CHD 5 |
| 86 |
IS 13381 : 1992 |
Potassium carbonate, anhydrous and sesquihydrate, photographic grade specification |
CHD 5 |
| 87 |
IS 15304 : 2003 |
Dipotassium hydrogen phosphate for electroplating - Specification |
CHD 5 |
| 88 |
IS 6655 : 1972 |
Methods of test for sulphur |
CHD 1 |
| 89 |
IS 3660 : Part 4 : 2017 |
Methods of test for natural rubber: Part 4 determination of total copper - Photometric method [ nr : 4 ] (Third Revision) |
PCD 29 |
| 90 |
IS 3607 : 1979 |
Specification for magnesite for chemical industry (First Revision) |
CHD 1 |
| 91 |
IS 4150 : 1984 |
Specification for potassium chloride, technical (Second Revision) |
CHD 1 |
| 92 |
IS 6015 : 1984 |
Specification for barium hydroxide (First Revision) |
CHD 1 |
| 93 |
IS 6306 : 1971 |
Methods of test for reclaimed rubber |
PCD 29 |
| 94 |
IS 7086 : Part 1 : 1973 |
Methods of sampling and test for rubber compounding ingredients,: Part 1 |
PCD 29 |
| 95 |
IS 9316 : Part 7 : 1987 |
Methods of test for rubber latex: Part 7 determination of total copper [rl:7] |
PCD 29 |
| 96 |
IS 5288 : 1980 |
Barium Chloride |
CHD 1 |
| 97 |
IS 4408 : 1979 |
Specification for sodium chloride, analytical reagent (First Revision) |
CHD 1 |
| 98 |
IS 2838 : 1964 |
Specification for stoneware containers for general purposes |
CHD 9 |
| 99 |
IS 2839 : 1964 |
Specification for industrial stoneware |
CHD 9 |
| 100 |
IS 1040 : 1987 |
Specification for calcium carbide, technical (Third Revision) |
CHD 1 |
| 101 |
IS 10614 : 1983 |
Method for atomic absorption spectrophotometric determination of sodium and potassium |
CHD 1 |
| 102 |
IS 1288 : 1982 |
Methods of test for mineral gypsum (Second Revision) |
CHD 1 |
| 103 |
IS 9958 : 1981 |
Atomic absorption spectrophotometric method - For determination of zinc |
CHD 1 |
| 104 |
IS 6507 : 1991 |
Sodium chromate,tetrahydrate specification (Second Revision) |
CHD 1 |
| 105 |
IS 6135 : 1981 |
Specification for soda ash, fused, technical (First Revision) |
CHD 1 |
| 106 |
IS 5316 : 1998 |
Ammonium carbonate - Specification (First Revision) |
CHD 1 |
| 107 |
IS 299 : 2012 |
Alumino - Ferric - Specification (Fifth Revision) |
CHD 1 |
| 108 |
IS 7402 : 2011 |
Ceramic water purifier filter candles - Specification (Second Revision) |
FAD 30 |
| 109 |
IS 1612 : 1976 |
Specification for iron powder (Reduction Grade) (First Revision) |
CHD 1 |
| 110 |
IS 252 : 2013 |
Caustic soda - Specification (Fourth Revision) |
CHD 1 |
| 111 |
IS 4847 : 2006 |
Copper salts for electroplating - Specification (Second Revision) |
CHD 5 |
| 112 |
IS 500 : 1999 |
Potassium metabisulphite, photographic grade - Specification (Fourth Revision) |
CHD 5 |
| 113 |
IS 13965 : 1994 |
Coconut monoethanolamide for cosmetic industry - Specification |
PCD 19 |
| 114 |
IS 14137 : 1994 |
Cetyl alcohol for cosmetic industry - Specification |
PCD 19 |
| 115 |
IS 14649 : 1999 |
Sindoor - Specification |
PCD 19 |
| 116 |
IS 15154 : 2002 |
Kajal - Specification |
PCD 19 |
| 117 |
IS 2323 : 2011 |
Spices and condiments - Mustard, whole and ground - Specification (Second Revision) |
FAD 9 |
| 118 |
IS 7101 : 1994 |
Coconut diethanolamide for cosmetic industry - Specification (Second Revision) |
PCD 19 |
| 119 |
IS 7087 : 1979 |
Specification for ceramic tower packings (First Revision) |
CHD 9 |
| 120 |
IS 10429 : 2011 |
Powdered talc for ceramic industry - Specification (First Revision) |
CHD 9 |
| 121 |
IS 5380 : 1976 |
Specification for sodium bromide, photographic grade (First Revision) |
CHD 5 |
| 122 |
IS 5761 : Part 2 : 1984 |
Specification for gold cyanide and gold potassium cyanide for electroplating: Part 2 for special applications (First Revision) |
CHD 5 |
| 123 |
IS 15752 : 2007 |
Sericite for ceramic industry - Specification |
CHD 9 |
| 124 |
IS 11477 : 2011 |
Pyrophyllite for ceramic industry - Specification (First Revision) |
CHD 9 |
| 125 |
IS 11643 : 1985 |
Specification for silicon carbide for bonded abrasive products |
PGD 9 |
| 126 |
IS 11751 : 1986 |
Specification for sodium sulphite, anhydrous, photographic grade |
CHD 5 |
| 127 |
IS 9923 : 1981 |
Specification for palladium salts for electroplating |
CHD 5 |
| 128 |
IS 1809 : 1979 |
Specification for nickel salts for electroplating (Second Revision) |
CHD 5 |
| 129 |
IS 8281 : 1976 |
Specification for hydroxylamine sulphate, photographic grade |
CHD 5 |
| 130 |
IS 9342 : 1987 |
Specification for sodium hypophosphite for electroless plating (First Revision) |
CHD 5 |
| 131 |
IS 6358 : 1971 |
Specification for potassium and sodium cyanides for electroplating |
CHD 5 |
| 132 |
IS 6267 : 1971 |
Specification for silver cyanide and silver potassium cyanide for electroplating |
CHD 5 |
| 133 |
IS 326 : Part 14 : 1985 |
Methods of sampling and test for natural and synthetic perfumery materials: Part 14 determination of heavy metals (Second Revision) |
PCD 18 |
| 134 |
IS 5691 : 1970 |
Specification for lacquer, cellulose nitrate, pigmented, finishing, glossy |
CHD 20 |
| 135 |
IS 6947 : Part 1 : 1973 |
Methods of estimation of composite pigments in oil pastes and ready mixed paints: Part 1 estimation of lead, zinc oxide, titanium dioxide, calcium compounds and zinc sulphide |
CHD 20 |
| 136 |
IS 10018 : 1981 |
Specification for lacquer, cellulose nitrate, clear, finishing, glossy for wood |
CHD 20 |
| 137 |
IS 6125 : 2017 |
Enamel, synthetic, stoving, for automobiles - Specification (First Revision) |
CHD 20 |
| 138 |
IS 9245 : 1994 |
Nail polish (Nail Enamel) - Specificaiton (First Revision) |
PCD 19 |
| 139 |
IS 9425 : 1980 |
Specification for selenium for glass compositions |
CHD 10 |
| 140 |
IS 997 : 1973 |
Specification for limestone and dolomite for glass industry (First Revision) |
CHD 10 |
| 141 |
IS 7161 : 1973 |
Specification for vegetable parchment or greaseproof paper/aluminium foil laminate for wrapping butter |
CHD 16 |
| 142 |
IS 1922 : 1961 |
Specification for liquid gold, bright |
CHD 10 |
| 143 |
IS 1355 : 1984 |
Methods of determination of the chemical composition of ash of coal and coke (First Revision) |
PCD 7 |
| 144 |
IS 10982 : 1984 |
Specification for strontium sulphate for electroplating |
CHD 5 |
| 145 |
IS 12519 : 1988 |
Specification for zinc pyrophosphate for electroplating |
CHD 5 |
| 146 |
IS 1880 : 1977 |
Specification for zinc oxide and zinc salts for electroplating (First Revision) |
CHD 5 |
| 147 |
IS 488 : 1980 |
Specification for glass making sands (Second Revision) |
CHD 10 |
| 148 |
IS 5667 : 1970 |
Specification for thinner for cellulose nitrate based paints and lacquers |
CHD 20 |
| 149 |
IS 1379 : 1985 |
Specification for ink, marking, for non - Porous surfaces (With or Without Stencil Plate) (First Revision) |
CHD 14 |
| 150 |
IS 50 : 1980 |
Withdrawl |
CHD 21 |
| 151 |
IS 82 : 1973 |
Methods of sampling and test for thinners and solvents for paints (First Revision) |
CHD 21 |
| 152 |
IS 15621 : 2005 |
Tetrabromobisphenol-a - Specification |
PCD 12 |
| 153 |
IS 13467 : 1992 |
Chlorinated rubber for paints - Specification |
CHD 21 |
| 154 |
IS 8766 : 1978 |
Specification for driers for paints |
CHD 21 |
| 155 |
IS 6287 : 1985 |
Methods of sampling and analysis for sugar confectionery (First Revision) |
FAD 24 |
| 156 |
IS 354 : Part 2 : 1986 |
Methods of sampling and test for resins for paints: Part 2 special test methods for alkyd resins (Second Revision) |
CHD 21 |
| 157 |
IS 51 : 1998 |
Zinc chrome for paints - Specification (Fourth Revision) |
CHD 21 |
| 158 |
IS 70 : 1980 |
Specification for cuprous oxide for paints (First Revision) |
CHD 21 |
| 159 |
IS 501 : 1976 |
Specification for oxalic acid, technical and analytical reagent (Second Revision) |
PCD 9 |
| 160 |
IS 5158 : 1987 |
Specification for phthalic anhydride, technical (Second Revision) |
PCD 9 |
| 161 |
IS 5254 : 1980 |
Specification for acetanllide, technical (First Revision) |
PCD 9 |
| 162 |
IS 6412 : 1971 |
Specification for benzoyl chloride, technical |
PCD 9 |
| 163 |
IS 6393 : 1987 |
Specification for phenylacetamide (First Revision) |
PCD 9 |
| 164 |
IS 6716 : 1981 |
Specification for benzoic acid, technical (First Revision) |
PCD 9 |
| 165 |
IS 7220 : 1974 |
Specification for ethylenediaminetetra - Acetic acid, pure and technical |
PCD 9 |
| 166 |
IS 7618 : 1974 |
Specification for hexachloroethane |
PCD 9 |
| 167 |
IS 7729 : 1975 |
Specification for sodium monochloroacetate |
PCD 9 |
| 168 |
IS 10597 : 1983 |
Specification for soluble starch phosphate (Edible Grade) |
FAD 16 |
| 169 |
IS 9250 : 1979 |
Specification for p - Nitrophenol |
PCD 9 |
| 170 |
IS 553 : 1984 |
Specification for rosin (Gum Rosin) (Second Revision) |
CHD 21 |
| 171 |
IS 5299 : 2001 |
Methods of sampling and tests for dye intermediates (First Revision) |
PCD 26 |
| 172 |
IS 2168 : 1971 |
Specification for pomfret canned in oil (First Revision) |
FAD 12 |
| 173 |
IS 6921 : 1973 |
Methods of sampling and test for lac and lac products |
CHD 23 |
| 174 |
IS 3752 : 2005 |
Alcoholic drinks - Methods of test (Second Revision) |
FAD 29 |
| 175 |
IS 1506 : 1977 |
Specification for copper oxychloride dusting powders (Second Revision) |
FAD 1 |
| 176 |
IS 10085 : 2003 |
Chemical analysis of zircon (First Revision) flour or sand |
MTD 34 |
| 177 |
IS 12107 : Part 10 : 2001 |
Methods of chemical analysis of alumino - Silicate refractory materials: Part 10 determination of iron manganese, calcium and magnesium by atomic absorption spectrometric method |
MTD 34 |
| 178 |
IS 12107 : Part 4 : 1987 |
Methods of chemical analysis of alumino silicate refractory materials: Part 4 determination of phosphorus |
MTD 34 |
| 179 |
IS 12107 : Part 7 : 1987 |
Methods of chemical analysis of alumino silicate refractory materials: Part 7 determination of manganese |
MTD 34 |
| 180 |
IS 12308 : Part 12 : 1992 |
Methods for Chemical Analysis of Cast Iron and Pig Iron: Part 12 Determination of copper by atomic absorption spectrometric method (for copper 0.01 to 0.5 percent) |
MTD 34 |
| 181 |
IS 12308 : Part 13 : 1992 |
Methods of chemical analysis of castiron and pigiron: Part 13 determination of magnesium by atomic absorption spectrometric method (For Magnesium Upto 0.1 Percent) |
MTD 34 |
| 182 |
IS 12308 : Part 14 : 1993 |
Methods of chemical analysis of cast iron and pig iron: Part 14 determination of titanium by hydrogen peroxide (Spectrophotometric) method (For Titanium Up To 0.25 Percent) |
MTD 34 |
| 183 |
IS 12308 : Part 3 : 1987 |
Methods for Chemical Analysis of Cast Iron and Pig Iron: Part 3 Determination of manganese by periodic spectrophotometric method (for manganese 0.1 to 2.5 percent) |
MTD 34 |
| 184 |
IS 12308 : Part 5 : 1991 |
Methods of chemical analysis of cast iron and pigiron: Part 5 determination of phosphorus (0.01 To 0.50 Percent) by alkalimetric method |
MTD 34 |
| 185 |
IS 12308 : Part 7 : 1991 |
Methods for Chemical Analysis of Cast Iron and Pig Iron: Part 7 Determination of nickel by dimethyl glyoxime (gravimetric) method(for nickel 0.5 to 36 percent) |
MTD 34 |
| 186 |
IS 12308 : Part 8 : 1997 |
Method for chemical analysis of cast iron and pig iron: Part 8 determination of chromium by persulphate oxidation method (For Chromium 0.1 To 28 Percent) |
MTD 34 |
| 187 |
IS 12308 : Part 9 : 1993 |
Methods for chemical analysis of cast iron and pig iron: Part 9 determination of molybdenum by thiocyanate (Spectrometric) method (For Molybdenum 0.01 To 1.0 Percent) |
MTD 34 |
| 188 |
IS 12614 : Part 1 : 1988 |
Methods of chemical analysis of ferromolybdenum: Part 1determination of molybdenum |
MTD 34 |
| 189 |
IS 12614 : Part 5 : 1988 |
Methods of chemical analysis of ferro-molybdenum: Part 5 determination of phosphorus |
MTD 34 |
| 190 |
IS 12614 : Part 6 : 1988 |
Methods of chemical analysis of ferro-molybdenum: Part 6 determination of copper |
MTD 34 |
| 191 |
IS 12614 : Part 7 : 1988 |
Methods of chemical analysis of ferro-molybdenum: Part 7 determination of aluminium |
MTD 34 |
| 192 |
IS 12667 : Part 4 : 1989 |
Chromite sand for foundries methods of chemical analysis: Part 4 determination of calcium |
MTD 34 |
| 193 |
IS 13452 : Part 3 : 1992 |
Chemical Analysis of Ferro Chromium - Part-3 Determination of Phosphorous in low carbon Ferro chromium by Spectrophotometric method . |
MTD 34 |
| 194 |
IS 13840 : Part 6 : 1998 |
Chemical analysis of ferrotitanium: Part 6 determination of titanium by X-ray fluorescence spectrometric method |
MTD 34 |
| 195 |
IS 13452 : Part 7 : 2003 |
Chemical analysis of ferrochromium: Part 7 determination of phosphorus in ferrocliRomium/ chargechrome by alkalimetric method |
MTD 34 |
| 196 |
IS 13452 : Part 6 : 1997 |
Chemical analysis of ferrochromium: Part 6 determination of chromium in low carbon ferrochromium |
MTD 34 |
| 197 |
IS 13840 : Part 3 : 1993 |
Chemical analysis of ferrotitanium: Part 3 determination of titanium by cupferron (Gravimetric) method |
MTD 34 |
| 198 |
IS 13840 : Part 4 : 1998 |
Chemical analysis of ferrotitanium: Part 4 determination of aluminium by cupferron (Gravimetric) method |
MTD 34 |
| 199 |
IS 13938 : Part 1 : 1994 |
Chemical analysis of ferromanganese: Part 1 determination of silicon by gravimetric method |
MTD 34 |
| 200 |
IS 13938 : Part 3 : 1993 |
Chemical analysis of ferromanganese: Part 3 determination of phosphorus by (Alkalimetric) method |
MTD 34 |
| 201 |
IS 13963 : Part 1 : 1994 |
Chemical analysis of cadmium metal: Part 1 determination of copper, zinc, lead and iron |
MTD 34 |
| 202 |
IS 13963 : Part 2 : 1994 |
Chemical analysis of cadmium metal: Part 2 determination of nickel, arsenic antimony and thallium by spectrophotometric methods |
MTD 34 |
| 203 |
IS 1409 : 1959 |
Methods of chemical analysis of antifriction bearing alloys |
MTD 34 |
| 204 |
IS 14529 : 2004 |
Chemical analysis of ferrosilicon - Magnesium alloy (First Revision) |
MTD 34 |
| 205 |
IS 1760 : Part 3 : 1992 |
Chemical analysis of limestone, dolomite and allied materials: Part 3 determination of iron oxide, alumina, calcium oxide and magnesia (First Revision) |
MTD 34 |
| 206 |
IS 1559 : Part 7 : 1982 |
Methods of chemical analysis of ferrosilicon: Part 7 determination of manganese (First Revision) |
MTD 34 |
| 207 |
IS 1559 : Part 5 : 2003 |
Chemical analysis of ferrosilicon: Part 5 determination of aluminium in ferrosilicon (Aluminnjm 0.05 To 1.75 Percent) (Second Revision) |
MTD 34 |
| 208 |
IS 1559 : Part 3 : 1982 |
Methods of chemical analysis of ferrosilicon: Part 3 determination of sulphur (First Revision) |
MTD 34 |
| 209 |
IS 1473 : 2004 |
Methods of chemical analysis of manganese ores (First Revision) |
MTD 34 |
| 210 |
IS 1493 : Part 3 : 1987 |
Methods of chemical analysis of iron ores: Part 3 determination of titanium, chromium, vanadium, calcium and magnesium by atomic absorption spectrophotometry |
MTD 34 |
| 211 |
IS 1527 : 1972 |
Methods for chemical analysis of high silica refractory materials (First Revision) |
MTD 34 |
| 212 |
IS 15396 : 2003 |
Chemical analysis of ferro - Silicon zirconium alloys |
MTD 34 |
| 213 |
IS 15403 : 2003 |
Method for determination of sulphur present in sponge iron after separation of non-magnetic materials |
MTD 34 |
| 214 |
IS 999 : 1959 |
Methods of chemical analysis of brazing solder |
MTD 34 |
| 215 |
IS 998 : Part 2 : 1983 |
Methods of chemical analysis of solders (Soft And I&in Cored) determi tion of iron, copper and arsensc (First Revision) |
MTD 34 |
| 216 |
IS 2000 : Part 2 : 1985 |
Methods of chemical analysis of bauxite: Part 2 determination of silica (First Revision) |
MTD 34 |
| 217 |
IS 2000 : Part 8 : 1989 |
Chemical analysis of bauxite: Part 8 determination of manganese by atomic absorption spectrophotometric method (First Revision) |
MTD 34 |
| 218 |
IS 2277 : 1964 |
Methods of chemical analysis of metallic silicon |
MTD 34 |
| 219 |
IS 228 : Part 12 : 2001 |
Methods for chemical of steels analysis: Part 12 determination of manganese by periodate spectrophotometric method in plain carbon, low alloy and high alloy steels (For Manganese 0.01 To 5.0 Percent) (Fourth Revision) |
MTD 34 |
| 220 |
IS 228 : Part 15 : 1992 |
Methods for chemical analysis of steels: Part 15 determination of copper by thiosulphate iodide method (For Copper 0.05 To 5 Percent) (Second Revision) |
MTD 34 |
| 221 |
IS 228 : Part 16 : 1992 |
Methods for chemical analysis of steels: Part 16 determination of tungsten by spectrophotometric method (For Tungsten 0.1 To 2 Percent) (Second Revision) |
MTD 34 |
| 222 |
IS 228 : Part 21 : 2003 |
Methods for chemical analysis of steels: Part 21 determination of copper by spectrophotometric method (For Copper 0.02 To 0.50 Percent) (Second Revision) |
MTD 34 |
| 223 |
IS 228 : Part 7 : 1990 |
Methods for chemical analysis of steels: Part 7 determination of molybdenum by alpha - Benzoinoxime method in alloy steels (For molybdenum 1 percent and not containing tungsten) (Third Revision) |
MTD 34 |
| 224 |
IS 8812 : Part 2 : 1982 |
Methods of chemical analysis of hard solders for jointing aluminium and aluminium alloys: Part 2 determination of aluminium |
MTD 34 |
| 225 |
IS 2600 : Part 4 : 1993 |
Methods of chemical analysis of zinc and zinc base alloys for die castings: Part 4 determination of chromium by spectrophotometric method (First Revision J |
MTD 34 |
| 226 |
IS 3200 : 2001 |
Chemical analysis of cryolite (Second Revision) |
MTD 34 |
| 227 |
IS 4027 : Part 9 : 1991 |
Methods of chemical analysis of bronzes: Part 9 determination of aluminium by atomic absorption spectrometric method (First Revision) |
MTD 34 |
| 228 |
IS 504 : Part 1 To 12 : 2002 |
Chemical analysis of aluminium and its alloys parts 1 to 12 (Second Revision) |
MTD 34 |
| 229 |
IS 504 : Part 13 to 16 : 2003 |
Chemical analysis of aluminium and its alloys parts 13 to 16 (Second Revision) |
MTD 34 |
| 230 |
IS 1669 : 1960 |
Specification for cuprous oxide dusting powders |
FAD 1 |
| 231 |
IS 1682 : 1973 |
Specification for cuprous oxide, technical (Fungicidal Grade) (First Revision) |
FAD 1 |
| 232 |
IS 1921 : 2005 |
Flux cored solder wire - Specification (Second Revision) |
MTD 9 |
| 233 |
IS 3904 : 1966 |
Specification for thiometon concentrates |
FAD 1 |
| 234 |
IS 2602 : 1989 |
Cadmium anodes for electroplating specification (First Revision) |
MTD 9 |
| 235 |
IS 3905 : 1966 |
Specification for thiometon emulsifiable concentrates |
FAD 1 |
| 236 |
IS 6853 : 1973 |
Specification for peptone, microbiological grade |
FAD 31 |
| 237 |
IS 7874 : Part 2 : 1975 |
Methods of tests for animal feeds and feeding stuffs: Part 2 minerals and trace elements |
FAD 5 |
| 238 |
IS 13600 : 1992 |
Chemical analysis of silver palladium alloys |
MTD 10 |
| 239 |
IS 6890 : Part 1 : 1989 |
Chemical analysis of gold alloys dental: Part 1 determination of gold, silver, palladium and platinum (First Revision) |
MTD 10 |
| 240 |
IS 6889 : 2000 |
Chemical analysis of silver - Tin dental amalgam alloy - Method (First Revision) |
MTD 10 |
| 241 |
IS 2113 : 2014 |
Assaying silver in silver and silver alloys - Methods (Third Revision) |
MTD 10 |
| 242 |
IS 1114 : 1964 |
Specification for ammonium chloride, fertilizer grade (Revised) |
FAD 7 |
| 243 |
IS 6092 : Part 3 : 1985 |
Methods of sampling and test for fertilizers: Part 3 determination of phosphorus (First Revision) |
FAD 7 |
| 244 |
IS 6092 : Part 3 : Sec 2 : 2004 |
Methods of sampling and test for fertilizers: Part 3 determination of phosphorus: Sec 2 test methods not covered under dual number standards (Second Revision) |
FAD 7 |
| 245 |
IS 6092 : Part 5 : 1985 |
Methods of sampling and test for fertilizers: Part 5 determination of secondary elements and micronutrients (First Revision) |
FAD 7 |
| 246 |
IS 15733 : 2006 |
Portable kit for quick detection of adulterants/contaminants in common food products - Specification |
FAD 28 |
| 247 |
IS 634 : 1965 |
Specification for ethylene dichloride - Carbon tetrachloride mixture (3 : 1 v/v) |
FAD 1 |
| 248 |
IS 8071 : 1976 |
Specification for propanil, technical |
FAD 1 |
| 249 |
IS 4505 : 2015 |
Sodium formaldehyde sulphoxylate - Specification (First Revision) |
CHD 1 |
| 250 |
IS 582 : 1970 |
Methods of chemical testing of leather (First Revision) |
CHD 17 |
| 251 |
IS 16146 : 2014 |
Aluminium lake of sunset yellow, FCF, food grade - Specification |
FAD 8 |
| 252 |
IS 15906 : 2010 |
Measurement of mercury level in fluorescent lamps |
ETD 23 |
| 253 |
IS 1350 : Part 5 : 2017 |
Methods of test for coal and coke : Part 5 determination of special impurities (carbon present as carbonate, chlorine and phosphorus) (Second Revision) |
PCD 7 |
| 254 |
IS 9875 : 2018 |
Lipstick - Specification (Second Revision) |
PCD 19 |
| 255 |
IS 286 : 2018 |
Methods of sampling and test for soaps (Third Revision) |
CHD 25 |
| 256 |
IS 16913 : 2018 |
Methods of test for cosmetics - Determination of heavy metals (Arsenic, Cadmium, Lead And Mercury) by atomic absorption spectrometry (Aas) |
PCD 19 |
| 257 |
IS 11673 : Part 1 : 2019 |
Sodium hypochlorite solution - Specification: Part 1 household and industrial use (Second Revision) |
CHD 1 |
| 258 |
IS 11673 : Part 2 : 2019 |
Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision) |
CHD 1 |
| 259 |
IS 11673 : Part 2 : 2019 |
Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision) |
CHD 1 |
| 260 |
IS 11673 : Part 2 : 2019 |
Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision) |
CHD 1 |
| 261 |
IS 11673 : Part 2 : 2019 |
Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision) |
CHD 1 |
| 262 |
IS 11673 : Part 2 : 2019 |
Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision) |
CHD 1 |
| 263 |
IS 11673 : Part 2 : 2019 |
Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision) |
CHD 1 |
| 264 |
IS 11673 : Part 2 : 2019 |
Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision) |
CHD 1 |
| 265 |
IS 11673 : Part 2 : 2019 |
Sodium hypochlorite solution - Specification: Part 2 water treatment use (Second Revision) |
CHD 1 |
| 266 |
IS 13840 : 2019 |
Methods of chemical analysis of ferrotitanium (First Revision) |
MTD 34 |
| 267 |
IS 4200 : 2020 |
Sodium Aluminate — Specification ( Second Revision ) |
CHD 1 |
| 268 |
IS 13452 : 2019 |
Methods of chemical analysis of ferrochromium (First Revision) |
MTD 34 |
| 269 |
IS 4955 : 2020 |
Household Laundry Detergent Powders — Specification ( Fifth Revision ) |
CHD 25 |
| 270 |
IS 9458 : 2020 |
Synthetic Detergents for Washing Woollen and Silk Fabrics — Specification ( Second Revision ) |
CHD 25 |
| 271 |
IS 9749 : 2020 |
Potash Feldspar and Soda Feldspar for Glass and Ceramic Industry — Specification ( Second Revision ) |
CHD 9 |
| 272 |
IS 11464 : 2011 |
Quartz for ceramic industry - Specification (First Revision) |
CHD 9 |
| 273 |
IS 4222 : 2018 |
Coloured chalks, moulded ? Specification (First Revision) |
CHD 14 |
| 274 |
IS 517 : 2020 |
Specification for methanol (methyl alcohol) (Third Revision) |
PCD 9 |
| 275 |
IS 1448 : Part 120 : 1986 |
Methods of test for petroleum and its products (P: 120) zinc in lubricating oil |
PCD 1 |
| 276 |
IS 6615 : 1972 |
Specification for general purpose packing/wrapping paper |
CHD 16 |
| 277 |
IS 6356 : 2001 |
Toothpaste - Specification (Third Revision) |
PCD 19 |
| 278 |
IS 2840 : 2002 |
China clay for ceramic industry - Specification (Second Revision) |
CHD 9 |
| 279 |
IS 4581 : 1978 |
Specification for phosphorus trichloride, pure and analytical reagent (First Revision) |
CHD 1 |
| 280 |
IS 13662 : 2021 |
Isabgol Husk - Specification |
FAD 16 |
| 281 |
IS/IEC 60645 : Part 5 : 2004 |
Electroacoustics Audiometric equipment Part 5: Instruments for the measurement of aural acoustic impedanceadmittance |
LITD 7 |
| 282 |
IS 3025 : Part 57 : 2005 |
Methods of sampling and test (Physical and Chemical) for water and wastewater: Part 57 boron (First Revision) |
CHD 36 |
| 283 |
IS 15464 : 2004 |
Anhydrous ethanol for use in automotive fuel - Specification |
PCD 3 |
| 284 |
IS 17595 : 2021 |
Textile glass -- Woven fabric -- Determination of tensile breaking force and elongation at break by the strip method |
TXD 40 |
| 285 |
IS 6100 : 1984 |
Specification for sodium tripolyphosphate, anhydrous, technical (First Revision) |
CHD 1 |
| 286 |
IS 4589 : 2002 |
Plastic clay and washed plastic clay for ceramic industry - Specification (Third Revision) |
CHD 9 |
| 287 |
IS 101 : Part 8 : Sec 5 : 1993 |
Methods of sampling and test for paints, varnishes and related products: Part 8 tests for pigments and other solids: Sec 5 : lead restriction test (Third Revision) |
CHD 20 |
| 288 |
IS 262 : 1982 |
SpecificatlOn for ferrous sulphate, heptahydrate (Second Revision) |
CHD 1 |
| 289 |
IS 14194 : Part 2 : 2013 |
Radionuclides in environmental samples - Methods of estimation: Part 2 gross alpha activity measurement (First Revision) |
CHD 30 |
| 290 |
IS 249 : 1979 |
Specification for sodium bichromate, technical (Third Revision) |
CHD 1 |
| 291 |
IS 7212 : 1974 |
Methods of determination of copper |
CHD 1 |
| 292 |
IS 247 : 1987 |
Specification for sodium sulphite, anhydrous (Fourth Revision) |
CHD 1 |
| 293 |
IS 6046 : 1982 |
Specification for gypsum for agricultural use (First Revision) |
FAD 7 |
| 294 |
IS 3438 : 1994 |
Silvered glass mirrors for general purposes - Specification (Second Revision) |
CHD 10 |
| 295 |
IS 853 : 1964 |
Specification for bone - Meal, raw (Revised) |
FAD 7 |
| 296 |
IS 9909 : 1981 |
Specification for succinic acid for electroless plating |
CHD 5 |
| 297 |
IS 5295 : 1985 |
Specification for ethylene glycol (First Revision) |
PCD 9 |
| 298 |
IS 254 : 1973 |
Specification for magnesium chloride (Second Revision) |
CHD 1 |
| 299 |
IS 1234 : 1980 |
Specification for ink, stencil, oil base, for marking porous surfaces (First Revision) |
CHD 14 |
| 300 |
IS 2697 : 1976 |
Specification for ammonium bicarbonate for food industry (First Revision) |
FAD 8 |
| 301 |
IS 255 : 1982 |
Specification for sodium sulphate, anhydrous (Technical Grade) (Second Revision) |
CHD 1 |
| 302 |
IS 333 : 1980 |
Specification for potassium permanganate (Second Revision) |
CHD 1 |
| 303 |
IS 380 : 1978 |
Specification for french chalk, technical (Second Revision) |
CHD 1 |
| 304 |
IS 6605 : 1972 |
Specification for potassium chromate |
CHD 1 |
| 305 |
IS 12008 : 1986 |
Specification for silica gel, chromatographic grade |
CHD 1 |
| 306 |
IS 330 : 1992 |
Chromium trioxide - Specification (Second Revision) |
CHD 5 |
| 307 |
IS 261 : 1982 |
Specification for copper sulphate (Second Revision) |
CHD 1 |
| 308 |
IS 573 : 1992 |
Trisodium phosphate - Specification (Fourth Revision) |
CHD 1 |
| 309 |
IS 2124 : 2000 |
Sodium bicarbonate - Specification (Second Revision) |
CHD 1 |
| 310 |
IS 2142 : 1992 |
Bromine, technical - Specification (Third Revision) |
CHD 1 |
| 311 |
IS 3959 : 2004 |
Skin powder - Specification (Second Revision) |
PCD 19 |
| 312 |
IS 4739 : 1986 |
Specification for zinc oxide elastic self-adhesive bandage (first revision) |
TXD 36 |
| 313 |
IS 797 : 1982 |
Specification for common salt for chemical industries (Third Revision) |
CHD 1 |
| 314 |
IS 2018 : 1998 |
Chemical analysis of calcium silicon (Second Revision) |
MTD 34 |
| 315 |
IS 964 : 1956 |
Methods for chemical analysis of silver solder |
MTD 10 |
| 316 |
IS 2017 : 1967 |
Methods of chemical analysis of metallic manganese |
MTD 34 |
| 317 |
IS 14194 : Part 1 : 2020 |
Radionuclides In Environmental Samples — Methods of Estimation Part 1 Gross Beta Activity Measurement ( Second Revision ) |
CHD 30 |
| 318 |
IS 3026 : 1991 |
Tin salts for electroplating - Specification (Second Revision) |
CHD 5 |
| 319 |
IS 9925 : 1981 |
Method for determination of gold and silver in gold and silver thread and embroidery materials |
MTD 10 |
| 320 |
IS 256 : 1972 |
Specification for glauber salt (Sodium Sulphate, Decahydrate), technical first revision) |
CHD 1 |
| 321 |
IS 494 : 1970 |
Specification for aluminium stearate for lubricants (First Revision) |
CHD 1 |
| 322 |
IS 505 : 1995 |
Light kaolin - Specification (Third Revision) |
CHD 1 |
| 323 |
IS 566 : 1984 |
Specification for disodium phosphate, dodecahydrate (Second Revision) |
CHD 1 |
| 324 |
IS 567 : 1993 |
Disodium phosphate, anhydrous - Specification (Second Revision) |
CHD 1 |
| 325 |
IS 2270 : 1965 |
Methods for assaying of platinum and platinum alloys |
MTD 10 |
| 326 |
IS 354 : Part 4 : 1986 |
Methods of sampling and test for resins for paints: Part 4 special test methods for epoxy resins (Second Revision) |
CHD 21 |
| 327 |
IS 260 : 2001 |
Aluminium sulphate, non - Ferric - Specification (Second Revision) |
CHD 1 |
| 328 |
IS 571 : 2000 |
Monosodium phosphate specification (Second Revision) |
CHD 1 |
| 329 |
IS 251 : 1998 |
Sodaash,technical - Specification (Fourth Revision) |
CHD 1 |
| 330 |
IS 9924 : 1981 |
Specification for rhodium salts for electroplating |
CHD 5 |
| 331 |
IS 594 : 1981 |
Specification for common salt for fish curing (Second Revision) |
FAD 8 |
| 332 |
IS 258 : 2000 |
Potash alum - Specification (Second Revision) |
CHD 1 |
| 333 |
IS 593 : 1978 |
Specification for salt for hide curing (Wet - Salting) (Second Revision) |
CHD 1 |
