Home About Standards Downloads Reports Standard Of The Week Standard Of The Month FAQ Contact Us
�

Indian Standard Details

    Print

Basic Details
IS Number : IS 2074 : 1992
Reviewed In : 2014
IS Title [Eng-Hn] : Ready Mixed Paint, Air Drying, Red Oxide Zinc Chrome, Priming
No of Revision : 2
No of Amendments : 3
Technical Department : Chemical Department
Technical Committee : CHD 20 ( Paints, Varnishes And Related Products )
Language : English

Classification Details
Group : Building Materials including Paints
Sub Group: Pigments, Paints and Accessories
Sub Sub Group : Industrial paints and related products
Aspects: Product Specification
Certification:
Ministry : Ministry of Chemicals and Fertilizers, Ministry of Defence, Ministry of Environment, Forest and Climate Change, Ministry of Railways
Short Commom Man's Title:
Itchs:
Degree of Equivalence: Indigenous
Identical/Equivalent Standards:
Organisation :

Cross Referencing Details
Indian Standards Refered In IS IS 2074 : 1992 :
SNo IS Number Title Technical Committee
1
IS 44 : 1991 Iron oxide pigments for paints - Specification (Second Revision) CHD 21
2
IS 51 : 1998 Zinc chrome for paints - Specification (Fourth Revision) CHD 21
3
IS 101 : Part 1 : Sec 1 : 1986 Methods of sampling and test for paints, varnishes and related products: Part 1 tests on liquid paints (General And Physical): Sec 1 sampling (Third Revision) CHD 20
4
IS 101 : Part 1 : Sec 2 : 1987 Methods of sampling and test for paints, varnishes and related products Part 1 Test on liquid paints (general and physical) Sec 2 Preliminary examination and preparation of samples for testing CHD 20
5
IS 101 : Part 1 : Sec 3 : 1986 Methods of sampling and test for paints, varnishes and related products: Part 1 tests on liquid paints (general and physical): Sec 3 preparation of panels CHD 20
6
IS 101 : Part 1 : Sec 5 : 1989 Methods of sampling and test for paints, varnishes and related products: Part 1 tests on liquid paints (general and physical): Sec 5 consistency (Third Revision) CHD 20
7
IS 101 : Part 1 : Sec 6 : 1987 Methods of sampling and test for paints, varnishes and related products: Part 1 tests on liquid paints (general and physical): Sec 6 flash point (Third Revision) CHD 20
8
IS 101 : Part 1 : Sec 7 : 2020 Methods of sampling and test for paints, varnishes and related products : Part 1 test on liquid paints (general and physical) : Sec 7 mass per 10 litres - determination of density - pycnometer method (Fourth Revision) CHD 20
9
IS 101 : Part 3 : Sec 1 : 1986 Methods of sampling and test for paints, varnishes and related products: Part 3 tests on paint film formation: Sec 1 drying time (Third Revision) CHD 20
10
IS 101 : Part 3 : Sec 4 : 1987 Methods of sampling and test for paints, varnishes and related products: Part 3 tests on paint film formation: Sec 4 finish (Third Revision) CHD 20
11
IS 101 : Part 3 : Sec 5 : 2022 Method of sampling and test of paints varnishes and related products : Part 3 test on paint film formation : Sec 5 determination of fineness of grind (Fifth Revision) CHD 20
12
IS 101 : Part 4 : Sec 2 : 2021 Methods of sampling and test for paints varnishes and related products: Part 4 optical tests: Sec 2 colour-visual comparison of colour of paints (Fourth Revision ) CHD 20
13
IS 101 : Part 4 : Sec 4 : 2020 Methods of Sampling and Test for Paints, Varnishes and Related Products : Part 4 optical test : Sec 4 gloss - determination of gloss value at 20�, 60� and 85� ( Fourth Revision ) CHD 20
14
IS 101 : Part 5 : Sec 2 : 1988 Methods of sampling and test for paints, varnishes and related products: Part 5 mechanical tests: Sec 2 flexibility and adhesion (Third Revision) CHD 20
15
IS 101 : Part 6 : Sec 1 : 1988 Methods of sampling and test for paints, varnishes and related products: Part 6 durability tests: Sec 1 resistance to humidity under conditions of condensation (Third Revision) CHD 20
16
IS 101 : Part 6 : Sec 2 : 1989 Methods of sampling and test for varnishes and related products: Part 6 durability test on paint films: Sec 2 keeping properties (Third Revision) CHD 20
17
IS 101 : Part 8 : Sec 2 : 1990 Methods of sampling and test for paints, varnishes and related products: Part 8 tests for pigments and other solids: Sec 2 pigments and non - volatile matter (Third Revision) CHD 20
18
IS 101 : Part 8 : Sec 5 : 2022 Methods of sampling and test for paints varnishes and related products : Part 8 tests for pigments and other solids : Section 5 lead restriction Test (Fourth Revision) CHD 20
19
IS 266 : 1993 Sulphuric acid - Specification (Third Revision) CHD 1
20
IS 376 : 1986 Specification for sodium hydroxide, analytical reagent (Third Revision) CHD 1
21
IS 1070 : 1992 Reagent grade water - Specification (Third Revision) CHD 13
22
IS 1303 : 1983 Glossary of terms relating to paints (Second Revision) CHD 20
23
IS 1407 : 1980 Specification for round paint tins (Second Revision) PGD 38
24
IS 1745 : 2018 Petroleum hydrocarbon solvents - Specification (Third Revision) PCD 3
25
IS 1872 : 2020 Thinner for synthetic paints and varnishes for aircrafts - Specification ( First Revision ) CHD 21
26
IS 2316 : 1990 Methods of preparation of standard solutions for colorimetric and volumetric analysis (Second Revision) CHD 1
27
IS 2552 : 1989 Steel drums (galvanized and ungalvanized) -- Specification (Third Revision) PGD 38
28
IS 6947 : Part 2 : 1975 Methods of estimation of composite pigments in oil pastes, ready mixed paints and enamels: Part 2 estimation of zinc chromes, ferric oxide and aluminium CHD 20
29
IS 7163 : 1989 Potassium iodide, pure and analytical reagent - Specification (First Revision) CHD 1
30
IS 13119 : 1991 Ammonium bifluoride - Specification CHD 13
International Standards Refered In IS 2074 : 1992 Standard contains no Cross Referenced International Standard.
IS 2074 : 1992 is Refered in following Indian Standards :
SNo IS Number Title Technical Committee
1 IS 2713 : Part 1 to 3 : 1980 Tubular Steel Poles for Overhead Power Lines CED 7
2 IS 805 : 1968 Code of practice for use of steel in gravity water tanks CED 7
3 IS 806 : 1968 Code of Practice for Use of Steel Tubes in General Building Construction (First Revision) CED 7
4 IS 1477 : Part 2 : 1971 Code of practice for painting of ferrous metals in buildings: Part 2 painting (First Revision) CED 13
5 IS 7080 : Part 1 : 1992 MTP suction apparatus - Specification: Part 1 manually operated (Second Revision) MHD 3
6 IS 7080 : Part 2 : 1992 MTP suction apparatus - Specification: Part 2 electrical - Cum - Manually operated (First Revision) MHD 3
7 IS 7080 : Part 3 : 1992 MTP suction apparatus specification: Part 3 electrically operated (Second Revision) MHD 3
8 IS 2133 : 1983 Specification for Wooden Tent Pins (Second Revision) CED 9
9 IS 3196 : Part 1 : 2013 Welded low carbon steel cylinders exceeding 5 litres water capacity for low pressure liquefiable gases: Part 1 cylinders for liquefied petroleum gases (Lpg) - Specification (Sixth Revision) MED 16
10 IS 16054 : 2013 Periodic inspection and testing - Welded low carbon steel cylinders exceeding 5 - Litre water capacity for liquified petroleum gas (Lpg) - Code of practice MED 16
11 IS 13258 : 2014 Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gas - Requirements for inspection and reconditioning of used lpg cylinders (First Revision) MED 16
12 IS 5391 : 1992 Adjustable metal chairs for use of typists and operators in telephone exchanges-Specification CED 35
13 IS 4351 : 2003 Steel Door Frames - CED 11
14 IS 10506 : 1996 Trolley for carrying jute bales - Specification (First Revision) MED 7
15 IS 14512 : 1998 Safe Cum Safe Deposite Lockers MED 24
16 IS 14505 : 1998 Fire resisting magnetic media protection cabinets MED 24
17 IS 5666 : 1970 Specification for etch (Pretreatment) primer CHD 20
18 IS 7164 : 1973 Specification for stopper CHD 20
19 IS 6126 : 1971 Specification for nitrocellulose surfacer CHD 20
20 IS 13607 : 1992 Heady mixed paint, finishing, general purposes, synthetic - Specification CHD 20
21 IS 110 : 2017 Ready mixed paint, brushing, grey filler, for enamels for use over primers - Specification (Third Revision) CHD 20
22 IS 9034 : 2018 Enamel, synthetic, exterior, air drying, for use on primed surfaces of motor vehicles and other equipment - Specification (First Revision) CHD 20
23 IS 2933 : 2013 Enamel exterior (a) undercoating, (b) finishing CHD 20
24 IS 2932 : 2003 Enamel, Synthetic, Exterior : (a) Undercoating (b) Finishing CHD 20
25 IS 6005 : 1998 Code of practice for phosphate coatings of iron and steel (First Revision) MTD 24
26 IS 8355 : 1977 Code of practice for packaging of sewing machine for household purposes TED 24
27 IS 8754 : 1992 Electrical anemograph - Specification (First Revision) PGD 21
28 IS 12417 : 1988 Specification for suction apparatus, pedal operated MHD 11
29 IS 4533 : 1995 Suction apparatus - Specification (Second Revision) MHD 11
30 IS 6207 : 1971 Specification for trolleys for oxygen cylinders MHD 11
31 IS 17240 : 2019 Corrosion Protection of Iron and Steel Sections Used in Passenger Ropeways - Code of Practice MED 6
32 IS 15500 : Part 1 to 8 : 2004 Deepwell handpumps, components and special tools - Specification MED 27
33 IS 16323 : 2017 SHIPS AND MARINE TECHNOLOGY - MARINE MAGNETIC COMPASSES, BINNACLES AND AZIMUTH READING DEVICES TED 19
34 IS 17382 : 2021 Syn Gas Ammonia Turbo Compressor Lubricating Oils Specification PCD 25