SNo |
IS Number |
Title |
Technical Committee |
1 |
IS 666 : Part 2 : 1972 |
Specification for jig bushes: Part 2 renewable drill bushes (Second Revision) |
PGD 35 |
2 |
IS 1715 : 2002 |
Self-holding tapers -- Dimensions (third revision) |
PGD 32 |
3 |
IS 5936 : 1981 |
Specification for arbors with morse taper shanks for shell tools (first revision) |
PGD 32 |
4 |
IS 6710 : 1977 |
Specification for centre drills type R (first revision) |
PGD 32 |
5 |
IS 8842 : 1978 |
Specification for high speed steel butt - Welded single point planing tools |
PGD 32 |
6 |
IS 8918 : 1978 |
Dimensions for spindle noses for adjustable adaptors |
PGD 32 |
7 |
IS 7707 : 1975 |
Specification for bolster plates for gap frame presses with die cushion |
PGD 4 |
8 |
IS 666 : Part 1 : 1972 |
Specification for jig bushes: Part 1 headed and headless jig bushes (Second Revision) |
PGD 35 |
9 |
IS 2289 : 1976 |
Specification for 60° dead centres for lathes (First Revision) |
PGD 35 |
10 |
IS 11346 : 2002 |
Tests for agricultural and water supply pumps - Code of acceptance (First Revision) |
MED 20 |
11 |
IS 9065 : 1979 |
Specification for aluminium hammers |
PGD 34 |
12 |
IS 12577 : 1989 |
Sealing pliers - Specification |
PGD 34 |
13 |
IS 3406 : Part 2 : 2014 |
Dimensions for countersinks and counterbores: Part 2 counterbores (Third Revision) |
PGD 37 |
14 |
IS 5240 : 1969 |
SpeclFication for cast skew bollards |
TED 17 |
15 |
IS 11103 : 1984 |
Specification for cylindrical measuring pins (Size Range From 0.1 mm up to and including 20 mm) |
PGD 25 |
16 |
IS 7411 : Part 2 : 1974 |
Ships' Intermediate Shafts (Integral Flange) - Part II : For Sea-going Vessels |
TED 19 |
17 |
IS 5269 : 1987 |
Specification for access hatches for inland vessels (First Revision) |
TED 18 |
18 |
IS/ISO 7388 : Part 1 : 2007 |
Tool Shanks with 7/24 taper for automatic tool changers: Part 1 Dimensions and designation of shanks of forms A,AD,AF,U,UD and UF |
PGD 32 |
19 |
IS/ISO 7388 : Part 2 : 2007 |
Tool shanks with 7/24 taper for automatic tool changers: Part 2 Dimensions and designation of shanks of forms J, JD and JF |
PGD 32 |
20 |
IS/ISO 7388 : Part 3 : 2007 |
Tool shanks with 7/24 taper for automatic tool changers: Part 3 Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF |
PGD 32 |
21 |
IS 3280 : 1966 |
Dimensions for mushroom ventilators with adjustable head - Welded type |
TED 17 |
22 |
IS 3281 : 1966 |
Dimensions for mushroom ventilators with fixed head - Welded type |
TED 17 |
23 |
IS 3282 : 1966 |
Dimensions for mushroom ventilators with adjustable head - Cast iron type |
TED 17 |
24 |
IS 3283 : 1966 |
Dimensions for mushroom ventilators with adjustable head - Cast iron type with provision for passage of light |
TED 17 |
25 |
IS 9796 : 1981 |
Specification for non - Weathertight steel doors |
TED 17 |
26 |
IS 4374 : 1980 |
Specification for mild steel fabricated vertical bollards with and without lugs (First Revision) |
TED 17 |
27 |
IS 4010 : 1967 |
Specification for sounding pipes |
TED 17 |
28 |
IS 5625 : 1970 |
Specification for cast cruciform bollards |
TED 17 |
29 |
IS 5858 : Part 1 : 1970 |
Accessories to Mechanical Ventilation Systems on Board Ships - Part I : Non-return Valves |
TED 17 |
30 |
IS 5858 : Part 3 : 1970 |
Specification for accessories to mechanical ventilation systems on board ships: Part 3 control dampers |
TED 17 |
31 |
IS 5858 : Part 2 : 1970 |
Specification for accessories to mechanical ventilation systems on board ships: Part 2 smoke protecting flap valves |
TED 17 |
32 |
IS 5875 : 1970 |
Specification for open - Deck scuppers |
TED 17 |
33 |
IS 5976 : 1971 |
Specification for ships punkah - Louvres |
TED 17 |
34 |
IS 6141 : 1971 |
Specification for ships single sheave blocks without becket |
TED 17 |
35 |
IS 6140 : 1971 |
Specification for ships snatch blocks |
TED 17 |
36 |
IS 6148 : 1971 |
Specification for head fittings and round nuts used with ships blocks |
TED 17 |
37 |
IS 6142 : 1971 |
Specification for ships single sheave blocks with becket |
TED 17 |
38 |
IS 6204 : 1971 |
Specification for cast open roller fairleads |
TED 17 |
39 |
IS 6195 : 1971 |
Specification for cast open chocks |
TED 17 |
40 |
IS 6277 : 1971 |
Specification for cast mud box |
TED 17 |
41 |
IS 6636 : 1972 |
Specification for hood for air pipes of ships piping systems |
TED 17 |
42 |
IS 13251 : 2019 |
Hydraulic fluid power ? mounting dimensions for accessories for single rod cylinders, 16 mpa (160 Bar) medium and 25 mpa (250 Bar) series (First Revision) |
PGD 36 |
43 |
IS/ISO 10821 : 2005 |
Industrial Sewing Machines - Safety Requirements for Sewing Machines, Units and Systems |
MED 29 |
44 |
IS 5402 : Part 1 : 2021 |
Microbiology of the food chain - Horizontal method for the enumeration of microorganisms- Part 1: Colony count at 30 C by the pour plate technique |
FAD 31 |
45 |
IS 5712 : 1970 |
Specification for slickers for leather industry |
CHD 17 |
46 |
IS 6482 : 1971 |
Specification for tampers and rammers for use in foundries |
MTD 14 |
47 |
IS 3291 : 1968 |
Specification for thread take up cams for sewing machines for household purposes (First Revision) |
MED 29 |