| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 13540 : Part 1 : 1992 |
Arms and ammunition - 4.5 mm (177) air rifle and air pistol pellets: Part 1 general purpose |
PGD 28 |
| 2 |
IS 13541 : Part 1 : 1993 |
Arms and ammunition - 55 mm (. 22) air rifle and air pistol pellets: Part 1 general purpose |
PGD 28 |
| 3 |
IS 14391 : 1997 |
Gas operated rifle (For shooting Pellets) - Specification |
PGD 28 |
| 4 |
IS 14422 : 1997 |
Arms and ammunition - Rifle 5.5 mm (0.22), bolt operated - Specification |
PGD 28 |
| 5 |
IS 11208 : 1985 |
Guidelines for registration of plumbers |
CED 24 |
| 6 |
IS 11387 : 1985 |
Requirements for high pressure jetting machine for sewer cleaning |
CED 24 |
| 7 |
IS 11397 : 1985 |
Attachment Tools For Power Driven Rodding Machine For Sewers |
CED 24 |
| 8 |
IS 4911 : 1986 |
Glossary of terms relating to bituminous waterproofing and damp - Proofing of buildings (First Revision) |
CED 41 |
| 9 |
IS 9527 : Part 3 : 1983 |
Code of practice for design and construction of port and harbour structures: Part 3 Sheet pile walls |
CED 47 |
| 10 |
IS 4410 : Part 10 : 1988 |
Glossary of terms relating to river valley projects: Part 10 hydro - Electric power station including water conductor system (First Revision) |
WRD 15 |
| 11 |
IS 10020 : Part 4 : 1981 |
Recommendations for design and construction of port and harbour components: Part 4 slipways |
CED 47 |
| 12 |
IS 8761 : 1978 |
Specification for steel folding cots |
CED 35 |
| 13 |
IS 9715 : 1981 |
Specification for steel visible indexing system cabinets |
CED 35 |
| 14 |
IS 4622 : 2020 |
Recommendations for Structural Design of Fixed-Wheel Gates ( Fourth Revision ) |
WRD 12 |
| 15 |
IS 4410 : Part 16 : Sec 2 : 1981 |
Glossary of terms relating to river valley projects: Part xvi gates and valves: Sec 2 valves |
WRD 12 |
| 16 |
IS 13623 : 1993 |
Criteria for choice of gates and hoists |
WRD 12 |
| 17 |
IS 4410 : Part 16 : Sec 1 : 1999 |
Glossary of terms relating to river valley projects: Part 16 gates and valves: Sec 1 gateb andTerms related with gates (First Revision) |
WRD 12 |
| 18 |
IS 7326 : Part 3 : 1976 |
Penstock and turbine inlet butterfly valves for hydropower stations and systems: Part 3 recommendations for operations and maintenance |
WRD 12 |
| 19 |
IS 7259 : Part 1 : 1988 |
Specification for wooden beds: Part 1 for use with mattresses (First Revision) |
CED 35 |
| 20 |
IS 5967 : Part 1 : 1988 |
Methods of test for strength and stability of tables and trolleys: Part 1 strength (First Revision) |
CED 35 |
| 21 |
IS 6185 : 1971 |
Specification and safety requirements for high chairs |
CED 35 |
| 22 |
IS 6184 : 1971 |
Dimensions for furniture mirrors |
CED 35 |
| 23 |
IS 7761 : 1983 |
Specification for steel book cases (First Revision) |
CED 35 |
| 24 |
IS 9012 : 1978 |
Recommended Practice for Shotcreting |
CED 2 |
| 25 |
IS 5515 : 1983 |
Specification for Compacting Factor Apparatus (First Revision) |
CED 2 |
| 26 |
IS 9103 : 1999 |
Concrete Admixtures -Specification (First Revision) |
CED 2 |
| 27 |
IS 3499 : Part 2 : 1985 |
metal chairs for office purposes Specification Part 2 Revolving and tilting |
CED 35 |
| 28 |
IS 4410 : Part 8 : 1992 |
Glossary of terms relating to river valley projects: Part 8 dams and dam: Section (First Revision) |
WRD 9 |
| 29 |
IS 4410 : Part 18 : 1983 |
Glossary of terms relating to river valley projects: Part 18 energy dissipation devices (Stilling Basins) |
WRD 9 |
| 30 |
IS 4410 : Part 9 : 1982 |
Glossary of terms relating to river valley projects: Part 9 spillways and siphons (First Revision) |
WRD 9 |
| 31 |
IS 7365 : 2010 |
Criteria for hydraulic design of bucket type energy dissipators (Second Revision) |
WRD 9 |
| 32 |
IS 12731 : 1989 |
Hydraulic design of impact type energy dissipators - Recommendations |
WRD 9 |
| 33 |
IS 12804 : 1989 |
Criteria for estimation of aeration demand for spillway and outlet structures |
WRD 9 |
| 34 |
IS 14591 : 1999 |
Temperature control of mass concrete for dams - Guidelines |
WRD 9 |
| 35 |
IS 5416 : Part 1 : 1988 |
Methods of test for strength and stability of chairs and stools: Part 1 strength (First Revision) |
CED 35 |
| 36 |
IS 4997 : 1968 |
Criteria for dbsign of hydraulic jump type stilling basins with horizontal and sloping apron |
WRD 9 |
| 37 |
IS 12375 : Part 1 : 2015 |
Implants for surgery - Partial and total hip joint prostheses Part 1 classification and designation of dimensions (Second Revision) |
MHD 2 |
| 38 |
IS 4410 : Part 19 : 1996 |
Glossary of terms relating to rivervalley projects: Part 19 grouting |
WRD 8 |
| 39 |
IS 13739 : 1993 |
Guidelines for estimation of flood damages |
WRD 6 |
| 40 |
IS 14519 : 1998 |
Guidelines for fixing rates for irrigation water |
WRD 6 |
| 41 |
IS 4410 : Part 21 : 1987 |
Glossary of terms relating to river valley projects: Part 21 flood control |
WRD 6 |
| 42 |
IS 15087 : 2001 |
Plannig and design of drainage in irrigation projects - Guidelines |
WRD 6 |
| 43 |
IS 4410 : Part 11 : Sec 5 : 1977 |
Glossary of terms relating to river valley projects: Part 11 hydrology: Sec 5 floods |
WRD 6 |
| 44 |
IS 4877 : 1968 |
Guide for preparation of estimate for river valley projects |
WRD 23 |
| 45 |
IS 2753 : Part 1 : 1991 |
Methods for estimation of preservatives in treated timber and in treating solutions: Part 1 Deterrmination of copper, arsenic, chromium, zinc, boron, creosote and fuel oil |
CED 9 |
| 46 |
IS 15845 : 2009 |
Environment management plan for hydropower/irrigation/flood control/ multipurpose river valley projects |
WRD 24 |
| 47 |
IS 15442 : 2004 |
Parameters for environmental impact assessment of water resources projects |
WRD 24 |
| 48 |
IS 14793 : 2013 |
Installation, maintenance and observation of the instruments for vibration studies other than earthquakes on hydraulic structures and machines - Code of practice (First Revision) |
WRD 16 |
| 49 |
IS 8226 : 2017 |
Installation and observation of base plate apparatus for measurement of foundation settlement in embankments - Code of practice (First Revision) |
WRD 16 |
| 50 |
IS 15358 : 2003 |
Liquid flow measurement in open channels - Flow measurements under ice conditions |
WRD 1 |
| 51 |
IS 15362 : 2003 |
Hydrometric determinations - Flow measurements in open channels using structures - Compound gauging structures |
WRD 1 |
| 52 |
IS 15898 : Part 3 : 2011 |
Measurement of liquid flow in open channels - Tracer dilution methods for the measurement of steady flow: Part 3 chemical tracers |
WRD 1 |
| 53 |
IS 9118 : 1979 |
Method for measurement of pressure by means of manometers |
WRD 1 |
| 54 |
IS 2925 : 1984 |
Specification for Industrial Safety Helmets(Bi-Lingual) |
CED 22 |
| 55 |
IS 3744 : 1985 |
Specification hose binding machine |
CED 22 |
| 56 |
IS 941 : 1985 |
Specification for blower and exhauster - For fire fighting (Second Revision) |
CED 22 |
| 57 |
IS 955 : 1980 |
Functional requirements for dry powder tender for fire brigade use (First Revision) |
CED 22 |
| 58 |
IS 9562 : 1980 |
Specification for non - Metal helmet for police force |
CED 22 |
| 59 |
IS 9973 : 1981 |
Specification for visor for scooter helmets |
CED 22 |
| 60 |
IS 9995 : 1981 |
Specification for visor for non-metal police and firemen's helmets |
CED 22 |
| 61 |
IS 1361 : 1978 |
Specification for Steel Windows for Industrial Buildings |
CED 11 |
| 62 |
IS 10451 : 1983 |
Specification for steel sliding shutters (Top Hung Type) |
CED 11 |
| 63 |
IS 10521 : 1983 |
Specification for collapsible gates |
CED 11 |
| 64 |
IS 12843 : 1989 |
Tolerances for erection of steel structures |
CED 7 |
| 65 |
IS 1123 : 1975 |
Method of identification of natural building stones |
CED 6 |
| 66 |
IS 1124 : 1974 |
Method of test for determination of water absorption, apparent specific gravity and porosity of natural building stones |
CED 6 |
| 67 |
IS 1125 : 2013 |
Determination of weathering of natural building stones - Method of test (SecondRevision) |
CED 6 |
| 68 |
IS 1126 : 2013 |
Determination of durability of natural building stones - Method of test (SecondRevision) |
CED 6 |
| 69 |
IS 1127 : 1970 |
Recommendations for dimensions and workmanship of natural building stones for masonry work (First Revision) |
CED 6 |
| 70 |
IS 1038 : 1983 |
Specification For Steel Doors, Windows And Ventilators |
CED 11 |
| 71 |
IS 4913 : 1968 |
Code of Practice for Selection, Installation and Maintenance of Timber Doors and Windows |
CED 11 |
| 72 |
IS 1128 : 1974 |
Specification for limestone (Slab And Tiles) |
CED 6 |
| 73 |
IS 1129 : 1972 |
Recommendation of dressing of natural building stones |
CED 6 |
| 74 |
IS 1130 : 1969 |
Marble (blocks, Slabs And Tiles) |
CED 6 |
| 75 |
IS 1706 : 1972 |
Method for determination of resistance to wear by abrasion of natural building stones |
CED 6 |
| 76 |
IS 4348 : 1973 |
Methods of test for determination of permeability of natural building stones |
CED 6 |
| 77 |
IS 5640 : 1970 |
Method of Test for Determining Aggregates Impact Value of Soft Coarse Aggregates |
CED 2 |
| 78 |
IS 5218 : 1969 |
Method of test for toughness of natural wilding stones (Second Revision) |
CED 6 |
| 79 |
IS 9394 : 1979 |
Stone Lintels |
CED 6 |
| 80 |
IS 6248 : 1979 |
Specification for metal rolling shutters and rolling grills (First Revision) |
CED 11 |
| 81 |
IS 10132 : 1982 |
Method of Test for Materials for Use in the Preparation of Magnesium Oxychloride Flooring Compositions |
CED 5 |
| 82 |
IS 2571 : 1970 |
Code of practice for laying in - Situ cement concrete flooring (First Revision) |
CED 5 |
| 83 |
IS 4441 : 1980 |
Code of practice for use of silicate type chemical resistant mortars (First Revision) |
CED 5 |
| 84 |
IS 4226 : 1988 |
Code of practice for fire safety of industrial buildings: aluminium (Magnesium Powder Factories (First Revision) |
CED 36 |
| 85 |
IS 4443 : 1980 |
Code of practice for use of resin type chemical resistant mortars |
CED 5 |
| 86 |
IS 3836 : 2000 |
Fire Safety of Industrial Buildings - Jute Mills - Code of Practice (Second Revision) |
CED 36 |
| 87 |
IS 4456 : Part 1 : 1967 |
Methods of test for chemical resistant mortars: Part 1 silicate type and resin type |
CED 5 |
| 88 |
IS 4631 : 1986 |
Code of practice for laying of epoxy resin floor toppings |
CED 5 |
| 89 |
IS 9704 : 1980 |
Methods of tests for linoleum sheets and tiles |
CED 5 |
| 90 |
IS 12583 : 1988 |
Corrugated Bitumen Roofing Sheets |
CED 5 |
| 91 |
IS 3808 : 1979 |
Method of test for non-combustibility of building materials (First Revision) |
CED 36 |
| 92 |
IS 3595 : 2002 |
Code of Practice for Fire Safety of Industrial Buildings : Coal Pulverizers and Associated Equipments (Second Revision) |
CED 36 |
| 93 |
IS 3034 : 1993 |
Fire Safety of Industrial Buildings: Electrical Generating and Distributing Stations - Code of Practice (Second Revision) |
CED 36 |
| 94 |
IS 1646 : 2015 |
Fire safety of buildings (General): electrical installations - Code of practice (Third Revision) |
CED 36 |
| 95 |
IS 1644 : 2013 |
Fire safety of buildings (General): exit requirements and personal hazard - Code of practice (Second Revision) |
CED 36 |
| 96 |
IS 2726 : 1988 |
Code of practice for fire safety of industrial buildings: cotton ginning and pressing (Including Cotton Seed Delintering) fagtories (First Revision) |
CED 36 |
| 97 |
IS 3614 : Part 1 : 1966 |
Fire-check Doors - Part I : Plate, Metal Covered and Rolling Type |
CED 36 |
| 98 |
IS 11457 : Part 1 : 1985 |
Code of practice for fire safety of chemical industries: Part 1 rubber and plastic |
CED 36 |
| 99 |
IS 11460 : 1985 |
Code of practice for fire safety of libraries and archives |
CED 36 |
| 100 |
IS 12777 : 1989 |
Method for classification of flame spread of products |
CED 36 |
| 101 |
IS 1198 : 1982 |
Code of practice for laying, fixing and maintenance of linoleum floors (First Revision) |
CED 5 |
| 102 |
IS 1661 : 1972 |
Code of practice for application of cement and cement - Lime plaster finishes (First Revision) |
CED 5 |
| 103 |
IS 2402 : 1963 |
Code of practice for external rendered finishes |
CED 5 |
| 104 |
IS 3461 : 1980 |
Specification for PVC asbestos Floor Tiles (first revision) |
CED 5 |
| 105 |
IS 3462 : 1986 |
Specification for Unbacked Flexible PVC Flooring (second revision) |
CED 5 |
| 106 |
IS 4442 : 1980 |
Code of practice for use of sulphur type chemical resistant mortars |
CED 5 |
| 107 |
IS 4456 : Part 2 : 1967 |
Methods of test for chemical resistant mortars: Part 2 sulphur type |
CED 5 |
| 108 |
IS 5318 : 1969 |
Code of practice for laying of flexible PVC sheet and tile flooring |
CED 5 |
| 109 |
IS 5766 : 1970 |
Code of practice for slaying burnt clay brick flooring |
CED 5 |
| 110 |
IS 6278 : 1971 |
Code of practice for whitewashing and colour - Washing |
CED 5 |
| 111 |
IS 657 : 1982 |
Specification for materials for use in the manufacture of magnesium oxychloride flooring compositions (Second Revision) |
CED 5 |
| 112 |
IS 658 : 1982 |
Code of practice for magnesium oxychloride composition floors |
CED 5 |
| 113 |
IS 9162 : 1979 |
Methods of tests for epoxy resins, hardeners and epoxy resin compositions for floor topping |
CED 5 |
| 114 |
IS 3809 : 1979 |
Fire resistance test for structures (First Revision) |
CED 36 |
| 115 |
IS 4860 : 1968 |
Specification for acid - Resistant bricks |
CED 5 |
| 116 |
IS 11401 : Part 1 : 1985 |
Requirements for slow sand filters: Part 1 general guidelines |
CED 24 |
| 117 |
IS 11906 : 1986 |
Recommendations for cement - Mortar lining for cast - Iron mild steel and ductile - Iron pipes and fittings for transportation of water |
CED 24 |
| 118 |
IS 1742 : 1983 |
Code of practice for building drainage (second revision) |
CED 24 |
| 119 |
IS 2065 : 1983 |
Code of practice for water supply in buildings (Second Revision) |
CED 24 |
| 120 |
IS 2470 : Part 1 : 1985 |
Code of practice for installation of septic tanks: Part 1 design criteria and construction (Second Revision) |
CED 24 |
| 121 |
IS 2470 : Part 2 : 1985 |
Code of practice for installation of septic tanks: Part 2 secondary treatment and disposal of septic tank effluent (Second Revision) |
CED 24 |
| 122 |
IS 4111 : Part 1 : 1986 |
Code of Practice for Ancillary Structures in Sewerage System: Part 1 Manholes (First Revision) |
CED 24 |
| 123 |
IS 4111 : Part 2 : 1985 |
Code of Practice for Ancillary Structures in Sewerage System: Part 2 Flushing Tanks (First Revision) |
CED 24 |
| 124 |
IS 4111 : Part 3 : 1985 |
Code of Practice for Ancillary Structures in Sewerage System: Part 3 Inverted Syphon (First Revision) |
CED 24 |
| 125 |
IS 4111 : Part 4 : 1968 |
Code of practice for ancillary structures in sewerage system: Part 4 puming stations and pumping mains (Rising Mains) |
CED 24 |
| 126 |
IS 5611 : 1987 |
Code of practice for construction of waste stabilization ponds (Faculative Type) (First Revision) |
CED 24 |
| 127 |
IS 6924 : 1973 |
Code of practice for the construction of refuse chutes in multistoreyed buildings |
CED 24 |
| 128 |
IS 7090 : 1985 |
Guidelines for rapid mixing devices (First Revision) |
CED 24 |
| 129 |
IS 8413 : Part 1 : 1977 |
Requirements for biological treatment equipment: Part 1 Trickling filters |
CED 24 |
| 130 |
IS 8413 : Part 2 : 1982 |
Requirements for biological treatment end equipment: Part 2 Activated sludge process and its modifications |
CED 24 |
| 131 |
IS 12288 : 1987 |
Code of practice for use and laying of ductile iron pipes |
CED 24 |
| 132 |
IS 6932 : Part 2 : 1973 |
Method of test for building limes Determination of carbon dioxide content |
CED 4 |
| 133 |
IS 6932 : Part 3 : 1973 |
Method of test for building limes: Part 3 Determination of residue on slaking of quicklime |
CED 4 |
| 134 |
IS 6932 : Part 4 : 1973 |
Method of test for building limes: Part 4 Determination of fineness of hydrated lime |
CED 4 |
| 135 |
IS 6932 : Part 5 : 1973 |
Method of test for building limes: Part 5 Determination of unhydrated oxide |
CED 4 |
| 136 |
IS 6932 : Part 6 : 1973 |
Method of test for building limes Part VI Determination of volume yield of quicklime |
CED 4 |
| 137 |
IS 6932 : Part 7 : 1973 |
Method of test for building limes Part VII Determination of compressive and transverse strength |
CED 4 |
| 138 |
IS 6932 : Part 8 : 1973 |
Method of test for building limes Part VIII Determination of workability |
CED 4 |
| 139 |
IS 6932 : Part 10 : 1973 |
Methods of Tests for Building Limes - Part X : Determination of Popping and Pitting of Hydrated Lime |
CED 4 |
| 140 |
IS 6932 : Part 11 : 1983 |
Methods of Tests for Building Limes - Part 11 : Determination of Setting Time of Hydrated Lime |
CED 4 |
| 141 |
IS 1624 : 1986 |
Methods of field testing of building lime (Second Revision) |
CED 4 |
| 142 |
IS 3068 : 1986 |
broken brick (burnt clay) coarse aggregates for use in lime concrete (Second Revision) |
CED 4 |
| 143 |
IS 4098 : 1983 |
Specification for lime - Pozzolana mixture (First Revision) |
CED 4 |
| 144 |
IS 3182 : 1986 |
Specification for Broken Brick (Burnt Clay) Fine Aggregates for use in Lime Mortar (Second Revision) |
CED 4 |
| 145 |
IS 2542 : Part 1 : Sec 1 to 12 : 1978 |
Methods of test for gypsum plaster, concrete and products: Part 1 plaster and concrete (First Revision) |
CED 4 |
| 146 |
IS 10360 : 1982 |
Lime-pozzolana Concrete Blocks For Paving |
CED 4 |
| 147 |
IS 10772 : 1983 |
Specification for quick setting lime pozzolana mixture |
CED 4 |
| 148 |
IS 9498 : 1980 |
Specification for inorganic aggregates for use in gypsum plaster |
CED 4 |
| 149 |
IS 4032 : 1985 |
Method of Chemical Analysis of Hydraulic Cement (First Revision) |
CED 2 |
| 150 |
IS 10049 : 1981 |
Code of practice for manufacture of lime based blocks |
CED 4 |
| 151 |
IS 10359 : 1982 |
Code Of Practice For Manufacture And Use Of Lime-pozzolana Concrete Blocks For Paving |
CED 4 |
| 152 |
IS 8272 : 1984 |
Specification for gypsum plaster for use in the manufacture of fibrous plaster boards (First Revision) |
CED 4 |
| 153 |
IS 6932 : Part 1 : 1973 |
Method of test for building limes Part 1 Determination of insoluble residue, loss on ignition, insoluble matter, silicone dioxide, ferric and aluminium oxide, calcium oxide and magnesium oxide |
CED 4 |
| 154 |
IS 2686 : 1977 |
Specification for cinder aggregates for use in lime concrete |
CED 4 |
| 155 |
IS 2547 : Part 1 : 1976 |
Specification for gypsum building plaster: Part 1 excluding premixed lightweight plasters (First Revision) |
CED 4 |
| 156 |
IS 14860 : 2000 |
Guidelines on fuel saving in vertical mixed - Feed lime shaft kilns |
CED 4 |
| 157 |
IS 2542 : Part 2 : Sec 1 to 8 : 1981 |
Methods of test for gypsum plaster, concrete and products: Part 2 gypsum products (First Revision) |
CED 4 |
| 158 |
IS 712 : 1984 |
Specification for building limes (Third Revision) |
CED 4 |
| 159 |
IS 1861 : Part 1 : 1990 |
Manufacture of lime in vertical mixed - Feed type kilns - guide: Part 1 from limestone (Second Revision) |
CED 4 |
| 160 |
IS 2547 : Part 2 : 1976 |
Specification for gypsum building plasters: Part 2 premixed lightweight plasters (First Revision) |
CED 4 |
| 161 |
IS 2849 : 1983 |
Specification for non - Load bearing gypsum partition blocks (Solid And Hollow Types) (First Revision) |
CED 4 |
| 162 |
IS 6932 : Part 9 : 1973 |
Method of test for building lime: Part 9 Determination of soundness |
CED 4 |
| 163 |
IS 2180 : 1988 |
Specification for heavy duty burnt clay building bricks (Third Revision) |
CED 30 |
| 164 |
IS 5525 : 1969 |
Recommendations for Detailing of Reinforcement in Reinforced Concrete works |
CED 2 |
| 165 |
IS 7320 : 1974 |
Specification for Concrete Slump Test Apparatus |
CED 2 |
| 166 |
IS 8125 : 1976 |
Dimensions and Materials of Cement Rotary Kilns, Components and Auxiliaries (Dry Process With Suspension Preheater) |
CED 2 |
| 167 |
IS 8142 : 1976 |
Method of test for determining setting time of concrete by penetration resistance |
CED 2 |
| 168 |
IS 9399 : 1979 |
Specification for apparatus for Flexural testing of Concrete |
CED 2 |
| 169 |
IS 10078 : 1982 |
Specification for Jolting apparatus used for testing Cement |
CED 2 |
| 170 |
IS 3583 : 1988 |
Burnt Clay Paving Bricks |
CED 30 |
| 171 |
IS 10850 : 1984 |
Specification for apparatus for Measurement of Water Retentivity of Masonry Cement |
CED 2 |
| 172 |
IS 11263 : 1985 |
Specification for Cylinder Measures for Determination of Air Content of Hydraulic Cement Mortar |
CED 2 |
| 173 |
IS 3952 : 2013 |
Burnt clay hollow bricks for walls and partitions - Specification |
CED 30 |
| 174 |
IS 3978 : 1967 |
Manufacture of burnt clay Mangalore pattern roofing tiles- Code of practice |
CED 30 |
| 175 |
IS 4885 : 1988 |
Specification for sewer bricks (First Revision) |
CED 30 |
| 176 |
IS 5779 : 1986 |
Specification for burnt clay soling bricks (First Reoision) |
CED 30 |
| 177 |
IS 7556 : 1988 |
Specification for burnt clay jallies (First Revision) |
CED 30 |
| 178 |
IS 8920 : 1978 |
Methods for sampling of burnt clay tiles |
CED 30 |
| 179 |
IS 4805 : 1978 |
Guide For Construction Of Brick Kiln |
CED 30 |
| 180 |
IS 2440 : 1975 |
GUIDE FOR DAYLIGHTING OF BUILDINGS (Second Revision) |
CED 12 |
| 181 |
IS 3792 : 1978 |
Guide for Heat Insulation of Non-industrial Buildings (First Revision) |
CED 12 |
| 182 |
IS 4963 : 1987 |
Recommendations for Buildings and Facilities for the Physically Handicapped (First Revision) |
CED 12 |
| 183 |
IS 7662 : Part 1 : 1974 |
Recommendations for orientation of buildings: Part 1 nonindustrial buildings |
CED 12 |
| 184 |
IS 2526 : 1963 |
Code of practice for acoustical design of auditoriums and conference halls |
CED 12 |
| 185 |
IS 1950 : 1962 |
Code of practice for sound insulation of non - Industrial buildings |
CED 12 |
| 186 |
IS 3362 : 1977 |
Code of Practice for Natural Ventilaltion of Residential Buildings (First Revision) |
CED 12 |
| 187 |
IS 3483 : 1965 |
Code of Practice for Noise Reduction in Industrial Buildings |
CED 12 |
| 188 |
IS 4954 : 1968 |
Recommendations for noise abatement in town planning |
CED 12 |
| 189 |
IS 5499 : 1969 |
Code of practice for construction of underground air - Raid shelters in natural soil |
CED 12 |
| 190 |
IS 6060 : 1971 |
Code of practice for daylighting of factory buildings |
CED 12 |
| 191 |
IS 6074 : 1971 |
Code of Practice for Functional Requirements of hotels, restaurants and other food service establishments |
CED 12 |
| 192 |
IS 11907 : 1986 |
Recommendations for calculation of solar radiation on buildings |
CED 12 |
| 193 |
IS 3103 : 1975 |
Code of Practice for Industrial Ventilation (First Revision) |
CED 12 |
| 194 |
IS 12332 : 1988 |
Code of practice for ventilation in petrochemical plants and refineries |
CED 12 |
| 195 |
IS 10080 : 1982 |
Specification for Vibration Machine |
CED 2 |
| 196 |
IS 10510 : 1983 |
Specification for Vee - Bee Consistometer |
CED 2 |
| 197 |
IS 2430 : 1986 |
Methods for Sampling of Aggregates for Concrete (First Revision) |
CED 2 |
| 198 |
IS 12330 : 1988 |
Specificatioon for Sulphate Resisting Portland Cement |
CED 2 |
| 199 |
IS 3558 : 1983 |
Code of Practice for Use of Immersion Vibrators for Consolidating Concrete (First Revision) |
CED 2 |
| 200 |
IS 457 : 1957 |
Code of practice for general construction of plain and reinforced concrete for dams and other massive structures |
CED 2 |
| 201 |
IS 8827 : 1978 |
Recommendations for basic requirements of school buildings |
CED 12 |
| 202 |
IS 6074 : 1971 |
Code of Practice for Functional Requirements of hotels, restaurants and other food service establishments (Bilingual) |
CED 12 |
| 203 |
IS 13816 : 2009 |
Fruit and vegetable products - Determination of mineral impurities content (First Revision) |
FAD 10 |
| 204 |
IS 10038 : 1981 |
Specification for textured plant protein foods prepared by extrusion cooking |
FAD 24 |
| 205 |
IS 10079 : 1982 |
Specification for Cylindrical Metal measures for use in tests of Aggregates and Concrete |
CED 2 |
| 206 |
IS 11578 : 1986 |
Method for determination of specific surface area of powders and porous particles using low temperature gas adsorption techniques |
CED 2 |
| 207 |
IS 10890 : 1984 |
Specification for Planetary Mixer used in tests of Cement and Pozzolana |
CED 2 |
| 208 |
IS 11262 : 1985 |
Specification for Calorimeter for Determination of Heat of Hydration of Hydraulic Cement |
CED 2 |
| 209 |
IS 1199 : 1959 |
Methods of sampling and analysis of concrete |
CED 2 |
| 210 |
IS 12089 : 1987 |
Specification for Granulated Slag for the Manufacture Portland Slag Cement |
CED 2 |
| 211 |
IS 10545 : 1992 |
Gynaecological and obstetric instruments - Clamp, curved on flat, Heaney's pattern - Shape and dimensions |
MHD 3 |
| 212 |
IS 6114 : 1991 |
Gynaecological instruments forceps, uterine vulsellum - Shape and dimensions (First Revision) |
MHD 3 |
| 213 |
IS 6115 : 1991 |
Gynaecological instruments - Forceps, uterine tenaculum - Shape and dimensions (First Revision) |
MHD 3 |
| 214 |
IS 6578 : 1992 |
Obstetrics instruments - Forceps, ovum - Shape and dimensions (First Revision) |
MHD 3 |
| 215 |
IS 6589 : 1992 |
Gynaecological Instruments - Forceps, uterine, dressing, Bozemann's pattern - Shape and dimensions |
MHD 3 |
| 216 |
IS 7433 : 1992 |
Obstetrics Instruments - Forceps, round ligament, Bonney's pattern - Shape and dimensions |
MHD 3 |
| 217 |
IS 7475 : 1992 |
Obstetric instruments - Clamp, vaginal, angled - Shape and dimensions (First Revision) |
MHD 3 |
| 218 |
IS 7735 : 1992 |
Forceps, sponge holding - Shape and dimensions (First Revision) |
MHD 3 |
| 219 |
IS 7964 : 1992 |
Obstetric instruments - Forceps, caesarean section, haemostasis, green - Armytage pattern - Shape and dimensions (First Revision) |
MHD 3 |
| 220 |
IS 7388 : 1992 |
Surgical instruments - Forceps,tissue,Allis pattern - Shape, size and dimensions |
MHD 1 |
| 221 |
IS 1727 : 1967 |
Methods of Test for Pozzolanic Materials (First Revision) |
CED 2 |
| 222 |
IS 7561 : 1992 |
Surgical instruments - Forceps, Gallstone, Desjardin's pattern - Shape and dimensions |
MHD 1 |
| 223 |
IS 7566 : 1992 |
Surgical instruments - Forceps,spring clip compressing,Michel's pattern - Shape and dimensions |
MHD 1 |
| 224 |
IS 7579 : 1992 |
Surgical instruments - Forceps,intestine holding, Denis Browne's pattern - Shape and dimensions |
MHD 1 |
| 225 |
IS 7870 : 1992 |
Surgical instruments - Needle,holder,Mayo-Hegar's and Crile-Wood's Patterns - Shape and dimensions |
MHD 1 |
| 226 |
IS 7893 : 1992 |
Surgical instruments - Forceps, towel, Backhaus's pattern - Shape. size and dimensions |
MHD 1 |
| 227 |
IS 8584 : 1992 |
Surgical instruments - Peritonium, forceps, Babcock's pattern - Shapes, sizes and dimensions |
MHD 1 |
| 228 |
IS 3085 : 1965 |
Method of Test for Permeability of Cement Mortar and Concrete |
CED 2 |
| 229 |
IS 3535 : 1986 |
Methods of Sampling Hydraulic Cement (First revision) |
CED 2 |
| 230 |
IS 4031 : Part 10 : 1988 |
Methods of Physical Tests for Hydraulic Cement: Part 10 Determination of Drying Shrinkage (First Revision) |
CED 2 |
| 231 |
IS 4031 : Part 11 : 1988 |
Methods of Physical Tests for Hydraulic Cement: Part 11 Determination of Density (First Revision) |
CED 2 |
| 232 |
IS 4031 : Part 12 : 1988 |
Methods of Physical Tests for Hydraulic Cement: Part 12 Determination of Air Content of Hydraulic Cement Mortar (First Revision) |
CED 2 |
| 233 |
IS 4031 : Part 3 : 1988 |
Methods of Physical Tests for Hydraulic Cement: Part 3 Determination of Soundness (First Revision) |
CED 2 |
| 234 |
IS 4031 : Part 5 : 1988 |
Methods of Physical Tests for Hydraulic Cement: Part 5 Determination of Initial and Final Setting Times (First Revision) |
CED 2 |
| 235 |
IS 4031 : Part 7 : 1988 |
Methods of Physical Tests for Hydraulic Cement: Part 7 Determination of Compressive Strength of Masonry Cement (First Revision) |
CED 2 |
| 236 |
IS 4031 : Part 8 : 1988 |
Methods of Physical Tests for Hydraulic Cement: Part 8 Determination of Transverse and Compressive Strength of Plastic Mortar using Prism (First Revision) |
CED 2 |
| 237 |
IS 10058 : 1985 |
Specification For Forceps, Fixation, Graefe's Pattern (Modified) (First Revision) |
MHD 5 |
| 238 |
IS 10696 : 1983 |
Specification for round segment fused bifocal blanks |
MHD 5 |
| 239 |
IS 4031 : Part 9 : 1988 |
Methods of Physical Tests for Hydraulic Cement: Part 9 Determination of Heat of Hydration (First Revision) |
CED 2 |
| 240 |
IS 4382 : 1967 |
Specification For Non-Tinted Ophthalmic Glass |
MHD 5 |
| 241 |
IS 4569 : Part 3 : 1985 |
Specification for scissors, eye: part 3 scissors, tenotomy (Second Revision) |
MHD 5 |
| 242 |
IS 4569 : Part 4 : 1985 |
Specification For Scissors, Eye Part 4 Scissors,Enucleation (Second Revision) |
MHD 5 |
| 243 |
IS 4569 : Part 5 : 1985 |
Specification For Scissors, Eye Part 5 Scissors, Spring Action, Vanna's Pattern (Modified) (Second Revision) |
MHD 5 |
| 244 |
IS 4569 : Part 6 : 1985 |
Specification For Scissors, Eye Part 6 Scissors, Iris (Second Revision) |
MHD 5 |
| 245 |
IS 455 : 2015 |
Portland slag cement - Specification (fifth revision) |
CED 2 |
| 246 |
IS 5512 : 1983 |
Specification for Flow Table for use in Tests of Hydraulic Cements and Pozzolanic Materials (First Revision) |
CED 2 |
| 247 |
IS 5536 : 1969 |
Specification for Constant Flow Type Air-permeability Apparatus (Lea and Nurse type) |
CED 2 |
| 248 |
IS 6925 : 1973 |
Methods of Test for Determination of Water Soluble Chlorides in Concrete Admixtures |
CED 2 |
| 249 |
IS 7325 : 1974 |
Specification for Apparatus for Determining Constituents of Fresh Concrete |
CED 2 |
| 250 |
IS 7861 : Part 1 : 1975 |
Code of Practice for Extreme Weather Concreting: Part 1 Recommended Practice for Hot Weather Concreting |
CED 2 |
| 251 |
IS 7861 : Part 2 : 1981 |
Code of Practice for Extreme Weather Concreting: Part 2 Recommended Practice for Cold Weather Concreting |
CED 2 |
| 252 |
IS 9142 : 1979 |
Specification for Artificial Lightweight Aggregates for Concrete Masonry Units |
CED 2 |
| 253 |
IS 9284 : 1979 |
Method of test for Abrasion Resistance of Concrete |
CED 2 |
| 254 |
IS 9376 : 1979 |
Specification for apparatus for measuring Aggregate Crushing Value and ten percent Fines Value |
CED 2 |
| 255 |
IS 9377 : 1979 |
Specification for apparatus for Aggregate Impact Value |
CED 2 |
| 256 |
IS 9799 : 1981 |
Specification for pressure Meter for determination of Air Content of freshly Mixed Concrete |
CED 2 |
| 257 |
IS 6472 : 1971 |
General requirements for tinted ophthalmic glass |
MHD 5 |
| 258 |
IS 6473 : 1972 |
Specification for trial spectacle lens sets |
MHD 5 |
| 259 |
IS 13049 : 1991 |
Diaphragm type (plastic body) float operated valves for cold water services - Specification |
CED 3 |
| 260 |
IS 13349 : 1992 |
Cast iron single faced thimble mounted sluice gates - Specification |
CED 3 |
| 261 |
IS 8771 : 1985 |
Specification For Needle Holder, Eye, Scissors And Forceps Combined, Castroviejo's Pattern (Modified) (First Revision) |
MHD 5 |
| 262 |
IS 13983 : 1994 |
Stainless steel sinks for domestic purposes - Specification |
CED 3 |
| 263 |
IS 8772 : 1985 |
Specification For Needle Holder, Eye, Barraquer's Pattern (Modified) (First Revision) |
MHD 5 |
| 264 |
IS 8773 : 1985 |
Specification For Dissector, Lacrimal Sac, Lang's Pattern (Modified) (First Revision) |
MHD 5 |
| 265 |
IS 8810 : 1985 |
Specification For Rougine For Lacrimal Sac, Rollet's Pattern (Modified) (First Revision) |
MHD 5 |
| 266 |
IS 9688 : 1992 |
Eye surgery instruments - Hooks, strabismus - Specification ( first revision) |
MHD 5 |
| 267 |
IS 1795 : 1982 |
Specification for pillar taps for water supply purposes (second revision) |
CED 3 |
| 268 |
IS 10540 : 1991 |
Cardiovascular Surgery Instruments - Clamps, Atrial Appendage, Glover's Pattern - Shape and Dimensions |
MHD 6 |
| 269 |
IS 10541 : 1991 |
Cardiovascular surgery instruments - Clamps vena cava,satinsky pattern shape, sizes and dimensions (First Revision) |
MHD 6 |
| 270 |
IS 2326 : 1987 |
Automatic Flushing Cisterns for Urinals (Other than Plastic Cisterns) |
CED 3 |
| 271 |
IS 13940 : 1994 |
Cardiovascular surgery instruments - Clamps, bulldog, DeBakey,ring handle - Shape and dimensions |
MHD 6 |
| 272 |
IS 2373 : 1981 |
Specification for water meters (bulk type) (third revision) |
CED 3 |
| 273 |
IS 6436 : 1989 |
Thoracic Surgery Instruments - Rib Spreader, Finochietto's Pattern, Adult Size |
MHD 6 |
| 274 |
IS 9554 : 1980 |
Specifications for lubricants for open gears |
PCD 25 |
| 275 |
IS 2685 : 1971 |
Code of practice for selection, installation and maintenance of sluice valves (First Revision) |
CED 3 |
| 276 |
IS 3004 : 1979 |
Specification for plug cocks for water supply purposes (first revision) |
CED 3 |
| 277 |
IS 6777 : 1989 |
Thoracic and cardiovascular surgery instruments - Forceps, dissecting, lung - Specification (First Revision) |
MHD 6 |
| 278 |
IS 3042 : 1965 |
Specification for single faced sluice gates (200 to 1200 mm) |
CED 3 |
| 279 |
IS 7345 : 1994 |
Cardiovascular surgery instruments - Anastomosis forceps and clamps - Patterns, shapes and dimensions (Second Revision) |
MHD 6 |
| 280 |
IS 3311 : 1979 |
Waste Plug And Its Accessories For Sinks And Wash-basins |
CED 3 |
| 281 |
IS 3950 : 1979 |
Specification for surface boxes for sluice valves (first revision) |
CED 3 |
| 282 |
IS 4038 : 1986 |
Specification for foot valves for water works purposes (second revision) |
CED 3 |
| 283 |
IS 4346 : 1982 |
Specification for washers for use with fittings for water services (first revision) |
CED 3 |
| 284 |
IS 5455 : 1969 |
Specification for cast iron steps for manholes |
CED 3 |
| 285 |
IS 5961 : 1970 |
Specification for cast iron gratings for drainage purposes |
CED 3 |
| 286 |
IS 6411 : 1985 |
Specification for gel - Coated glass fibre reinforced polyester resin bath tubs (first revision) |
CED 3 |
| 287 |
IS 6784 : 1996 |
Methods for performance testing of water meters (Domestic Type) (Second Revision) |
CED 3 |
| 288 |
IS 771 : Part 1 : 1979 |
Specification for glazed fire - Clay sanitary appliances: Part 1 general requirements |
CED 3 |
| 289 |
IS 9739 : 1981 |
Specification for pressure reducing valves for domestic water supply systems |
CED 3 |
| 290 |
IS 8317 : 1991 |
Cardiovascular surgery instruments - Clamps, vascular, angled at 45 - Shape and dimensions (First Revision) |
MHD 6 |
| 291 |
IS 8335 : 1991 |
Cardiovascular Surgery Instruments - Clamps, Auricle, Satinsky Pattern - Sizes, Shape and Dimensions |
MHD 6 |
| 292 |
IS 8345 : 1994 |
Cardiovascular surgery instruments - Clamps, bulldog, cross action type - Specification (First Revision) |
MHD 6 |
| 293 |
IS 8409 : 1991 |
Cardiovascular Surgery Instruments - Dilator, Valve, Tubb's Mitral Pattern |
MHD 6 |
| 294 |
IS 8890 : 1991 |
Thoracic surgery instruments - Clamps,bronchus - Types, shapes and dimensions (First Revision) |
MHD 6 |
| 295 |
IS 9928 : 1981 |
Clamp, Aortic, DeBakey's Pattern (Spoon Shaped angled Jaw) |
MHD 6 |
| 296 |
IS 9197 : 1979 |
Specification for epoxy resin, hardeners and epoxy resin compositions for floor topping |
CED 5 |
| 297 |
IS 9510 : 1980 |
Specification for bitumen mastic, acid - Resisting grade |
CED 5 |
| 298 |
IS 13175 : 1991 |
Neurosurgical instruments - Needle holder - Shape and dimensions |
MHD 7 |
| 299 |
IS 8174 : 1994 |
Neurosurgical instruments - Forceps, artery, Dandy's pattern - Shape and dimensions - First Revision |
MHD 7 |
| 300 |
IS 8175 : 1994 |
Neurosurgical Instruments - Forceps, Artery, Straight and Curved on Flat, Hugh Cairn's Pattern - Shape and Dimensions (First Revision) |
MHD 7 |
| 301 |
IS 7779 : Part 1 : Sec 2 : 1975 |
Schedule for properties and availability of stones for construction purposes: Part 1 Gujarat state: Sec 2 engineering properties of building stones |
CED 6 |
| 302 |
IS 1891 : Part 5 : 1993 |
Conveyor and elevator textile belting - Specification: Part 5 fire resistant belting for surface application |
PGD 40 |
| 303 |
IS 3878 : 1967 |
Specification for plaster shears, dental |
MHD 8 |
| 304 |
IS 3879 : 1967 |
Specification for wax spatula, dental |
MHD 8 |
| 305 |
IS 3887 : 1978 |
General requirements for cutting type dental instruments (First Revision) |
MHD 8 |
| 306 |
IS/ISO 13203 : 2005 |
Chains, sprockets and accessories - List of equivalent terms |
PGD 33 |
| 307 |
IS 15890 : 2010 |
Design, installation and testing of solar timber seasoning kiln - Guidelines |
CED 9 |
| 308 |
IS 2535 : Part 1 : 2004 |
Cylindrical gears for general and heavy engineering: Part 1 standard basic rack tooth profile (Third Revision) |
PGD 33 |
| 309 |
IS 2637 : 2004 |
Steel roller chains, types s and c, attachments and sprockets (Second Revision) |
PGD 33 |
| 310 |
IS 7315 : 1974 |
Guidelines for design, installation and testing of timber seasoning kilns (Compartment type with cross-forced air circulation) |
CED 9 |
| 311 |
IS 3142 : 1993 |
Pulleys - V - Grooved pulleys for endless V - Belts sections 2, A, B, C, D and e and endless wedge belts sections SPZ, SPA, SPB and SPC - Specification (Second Revision) |
PGD 40 |
| 312 |
IS 3681 : 1995 |
Gears - Cylindrical, gears - Accuracies (First Revision) |
PGD 33 |
| 313 |
IS 5037 : Part 1 : 2004 |
Straight bevel gears for general engineering and heavy engineering: Part 1 basic rack (First Revision) |
PGD 33 |
| 314 |
IS 5037 : Part 2 : 2004 |
Straight bevel gears for general engineering and heavy engineering: Part 2 module and diametral pitches (First Revision) |
PGD 33 |
| 315 |
IS 6580 : 1972 |
Specification for train lighting belt fasteners |
PGD 40 |
| 316 |
IS 7504 : 1995 |
Gears - Cylindrical gears - Accuracies methods of inspection (First Revision) |
PGD 33 |
| 317 |
IS 10388 : 1982 |
Corrugated coir wood wool cement roofing sheets-Specification |
CED 13 |
| 318 |
IS 10439 : 1983 |
Code of practice for patent glazing |
CED 13 |
| 319 |
IS 10566 : 1983 |
Methods of tests for preformed fillers for expansion joints in concrete paving and structural construction |
CED 13 |
| 320 |
IS 11096 : 1984 |
Code of practice for design and construction of bolt jointed timber construction |
CED 13 |
| 321 |
IS 11433 : Part 1 : 1985 |
Specification for one part gun-grade polysulphide- based joints sealants Part 1 General requirements |
CED 13 |
| 322 |
IS 8777 : 2008 |
Agricultural machinery - Endless variable - Speed V - Belts and groove sections of corresponding pulleys (First Revision) |
PGD 40 |
| 323 |
IS 12118 : Part 1 : 1987 |
Specification for two - Part polysulphide - Based sealants: Part 1 general requirements |
CED 13 |
| 324 |
IS 8843 : 1978 |
Accuracy requirements for turbine gears |
PGD 33 |
| 325 |
IS 9804 : Part 1 : 2009 |
Synchronous belt drivers - Belts: Part 1 pitch codes MXL, XL, l, H, XH and XXH - Metric and inch dimensions (First Revision) |
PGD 40 |
| 326 |
IS 12506 : 1988 |
Code of practice for improved that ching of roof with rotand fire retardant - Treatment |
CED 13 |
| 327 |
IS 1838 : Part 3 : 2011 |
Preformed Fillers for Expansion Joints in Concrete Pavements and Structures(non-extruding and resilient type) Part 3 Polymer Based |
CED 13 |
| 328 |
IS 1946 : 1961 |
Code of practice for use of fixtng devices in walls, ceilings and floors of solid construction |
CED 13 |
| 329 |
IS 2116 : 1980 |
Specification for sand for masonry mortars (First Revision) |
CED 13 |
| 330 |
IS 6332 : 1984 |
Code of practice for construction of floor and roofs using precast doubly-curved shell units |
CED 13 |
| 331 |
IS 6509 : 1985 |
Code of practice for 1nstallation of joints in concrete pavements (First Revision) |
CED 13 |
| 332 |
IS 9954 : 1981 |
Pictorial surface preparation standards for painting of steel surfaces |
CED 13 |
| 333 |
IS 2441 : 1984 |
Code of practice for fixing ceiling coverings (First Revision) |
CED 13 |
| 334 |
IS 3400 : Part 24 : 2012 |
Methods of test for vulcanized rubber: Part 24 rubber and plastics hose - Determination of adhesion between components (First Revision) |
PCD 29 |
| 335 |
IS 552 : 1965 |
Specification for smith bits (Revised) |
PGD 34 |
| 336 |
IS 843 : 1968 |
SPECIFICATION FOR SMITH’S TONGS (First Revision) |
PGD 34 |
| 337 |
IS 846 : 1968 |
Specification for Smith flatters (First Revision) |
PGD 34 |
| 338 |
IS 1930 : 2003 |
Woodworking tools - Chisels and gouges (Third Revision) |
PGD 34 |
| 339 |
IS 12053 : 1987 |
Code of Practice for the Preparation and Application of Putty for Repairing Plywood and Other Wood Based Panels |
CED 20 |
| 340 |
IS 12077 : 1987 |
Code of practice for testing of timbers for plywood manufacture |
CED 20 |
| 341 |
IS 12120 : 1987 |
Code of practice for preservation of plywood and other panel products |
CED 20 |
| 342 |
IS 13068 : 1991 |
Bonded abrasive products - Static balancing of grinding wheels - Testing |
PGD 9 |
| 343 |
IS 13520 : 1992 |
Diamond abrasive frame saw blades - Specification |
PGD 9 |
| 344 |
IS 13596 : 1993 |
Dimensional tolerances on grinding wheels |
PGD 9 |
| 345 |
IS 14369 : 1996 |
Abrasive belts - Designation, dimensions and tolerances and selection of width/length combinations |
PGD 9 |
| 346 |
IS 14370 : 1996 |
Determination of magnetic matter in abrasives - Test methods |
PGD 9 |
| 347 |
IS 14992 : 2012 |
Coated abrasives - Flap wheels with shaft (First Revision) |
PGD 9 |
| 348 |
IS 15287 : Part 1 : 2003 |
Coated abrasives - Grain size analysis: Part 1 grain size distribution test |
PGD 9 |
| 349 |
IS 15287 : Part 2 : 2003 |
Coated abrasives - Grain size analysis: Part 2 determination of grain size distribution of macrogrits P12 to P220 |
PGD 9 |
| 350 |
IS 15287 : Part 3 : 2018 |
Coated abrasives - Grain size analysis: Part 3 determination of grain size distribution of microgrits P240 to P2500 (First Revision) |
PGD 9 |
| 351 |
IS 15288 : Part 1 : 2003 |
Bonded abrasives - Determination and designation of grain size distribution: Part 1 macrogrits F4 to F220 |
PGD 9 |
| 352 |
IS 15289 : 2003 |
Abrasive macrograins - Determination of bulk density |
PGD 9 |
| 353 |
IS 15289 Part 2 : 2013 |
Abrasive grains - Determination of bulk density: Part 2 microgrits (First Revision) |
PGD 9 |
| 354 |
IS 15425 : 2004 |
Abrasive grains -- Determinations of capillarity |
PGD 9 |
| 355 |
IS 15538 : 2018 |
Abrasive grains - Test sieving machines |
PGD 9 |
| 356 |
IS 1734 : Part 1 to 20 : 1983 |
Methods of test for plywood |
CED 20 |
| 357 |
IS 2380 : Part 22 : 1981 |
Method of test for wood particle boards and boards from other lignocellulosic materials: Part 22 Determination of surface glueability test |
CED 20 |
| 358 |
IS 2380 : Part 23 : 1981 |
Method of test for wood particle boards and boards from other lignocellulosic materials: Part 23 Vibration tests for particle boards |
CED 20 |
| 359 |
IS 3129 : 1985 |
Specification for low density particle boards |
CED 20 |
| 360 |
IS 3178 : 1996 |
Abrasive emery grain - Specification (First Revision) |
PGD 9 |
| 361 |
IS 5201 : 1969 |
Methods for sampling of abrasive emery grain |
PGD 9 |
| 362 |
IS 715 : 2002 |
Coated Abrasives |
PGD 9 |
| 363 |
IS/ISO 603 : Part 3 : 1999 |
Bonded Abrasive Products- Dimensions Part 3 Grinding Wheels for Internal Cylindrical Grinding |
PGD 9 |
| 364 |
IS/ISO 15635 : 2001 |
Coated abrasives - Flap discs |
PGD 9 |
| 365 |
IS/ISO 21948 : 2001 |
Coated abrasives - Plain sheets |
PGD 9 |
| 366 |
IS/ISO 21949 : 2001 : 2001 |
Coated abrasives - Plain sheets with holes for dust extraction |
PGD 9 |
| 367 |
IS/ISO 21950 : 2001 |
Coated abrasives - Plain discs |
PGD 9 |
| 368 |
IS/ISO 21951 : 2001 |
Coated abrasives - Plain discs with holes for dust extraction |
PGD 9 |
| 369 |
IS 3348 : 1965 |
Specification For Fibre Insulation Boards |
CED 20 |
| 370 |
IS/ISO 603 : Part 1 : 1999 |
Bonded abrasive products - Dimensions: Part 1 grinding wheels for external cylindrical grinding between centres |
PGD 9 |
| 371 |
IS/ISO 603 : Part 10 : 1999 |
Bonded abrasive products - Dimensions: Part 10 stones for honing and superfinishings |
PGD 9 |
| 372 |
IS/ISO 603 : Part 2 : 1999 |
Bonded abrasive products - Dimensions: Part 2 grinding wheels for centreless external cylindrical grinding |
PGD 9 |
| 373 |
IS 3478 : 1966 |
Specification for High Density Wood Particle Boards |
CED 20 |
| 374 |
IS 3513 : Part 4 : 1966 |
Resin Treated Compressed Wood Laminates (Compregs) - Specification Part 4 Sampling and tests |
CED 20 |
| 375 |
IS 4859 : 1968 |
Specification for high strength aircraft plywood |
CED 20 |
| 376 |
IS 4835 : 1979 |
Specification Polyvinyl Acetate Dispersion Based Adhesives for Wood |
CED 20 |
| 377 |
IS 5539 : 1969 |
Specification for preservative treated plywood |
CED 20 |
| 378 |
IS 709 : 1974 |
Specification for medium strength aircraft plywood |
CED 20 |
| 379 |
IS 7316 : 1974 |
Specification for decorative plywood using plurality of veneers for decorative faces |
CED 20 |
| 380 |
IS 851 : 1978 |
Specification for synthetic resin adhesives for construction work (Non - Structural) in wood (First Revision) |
CED 20 |
| 381 |
IS 1931 : 2000 |
ENGINEER’S FILES — SPECIFICATION ( Third Revision) |
PGD 34 |
| 382 |
IS 2028 : 2004 |
Open jaw wrenches (Spanners) - Specification (Fijih Revision) |
PGD 34 |
| 383 |
IS 2029 : 1998 |
Ring wrenches (Spanners) - Specification (Fourth Revision) |
PGD 34 |
| 384 |
IS 3082 : 2008 |
Assembly tools for screws and nuts - hexagon socket screw keys (Third Revision) |
PGD 34 |
| 385 |
IS 3529 : 1966 |
Specification for eyelet pliers |
PGD 34 |
| 386 |
IS 3568 : 1990 |
Round nose pliers - Specification (First Revision) |
PGD 34 |
| 387 |
IS 4095 : 1991 |
Pincers - Specification (Second Revision) |
PGD 34 |
| 388 |
IS 9307 : Part 1 to 8 : 1979 |
Methods of Test for Wood-based Structural Sandwich Construction |
CED 20 |
| 389 |
IS 4595 : 1969 |
GENERAL REQUIREMENTS FOR NON-SPARKING TOOLS |
PGD 34 |
| 390 |
IS 4806 : 1968 |
Specification For Heat Coil Pliers |
PGD 34 |
| 391 |
IS 5006 : 1968 |
Specification for battery terminal pliers |
PGD 34 |
| 392 |
IS 4915 : 1968 |
Specification for welders chipping hammer |
PGD 34 |
| 393 |
IS 5066 : 1969 |
Specification for glass pliers |
PGD 34 |
| 394 |
IS 5067 : 1969 |
SpecificatfOn for fencing pliers |
PGD 34 |
| 395 |
IS 5068 : 1969 |
Specification for grab hook |
PGD 34 |
| 396 |
IS 5098 : 1969 |
Specification for cross - Cut and rip saws |
PGD 34 |
| 397 |
IS 5122 : 1969 |
Specification for tyre levers |
PGD 34 |
| 398 |
IS 5123 : 1969 |
Specification for tenon and dovetail saws |
PGD 34 |
| 399 |
IS 5657 : 1970 |
Specification for jim crows |
PGD 34 |
| 400 |
IS 5663 : 1970 |
Specification for Brick and Mason |
PGD 34 |
| 401 |
IS 6588 : 1972 |
Specification for gold chloride (Chloroauric Acid) |
CHD 5 |
| 402 |
IS 6650 : 1972 |
Method for the determination of residual thiosulphate and tetrathionate in processed photographic papers |
CHD 5 |
| 403 |
IS 5697 : 1970 |
Specification for ripping chisels |
PGD 34 |
| 404 |
IS 5991 : 1971 |
Specification for ballast rakes |
PGD 34 |
| 405 |
IS 1315 : 1977 |
Method for determination of linear density of yarns spun on cotton system (first revision) |
TXD 1 |
| 406 |
IS 326 : Part 4 : 2005 |
Methods of sampling and test for natural and synthetic perfumery materials: Part 4 determination of optical rotation (Third Revision) |
PCD 18 |
| 407 |
IS 3845 : 1966 |
Code of practice for joints used in wooden furniture |
CED 35 |
| 408 |
IS 12859 : 1989 |
Fire fighting - Brush hook for forest fires - Specification |
CED 22 |
| 409 |
IS 6002 : 1992 |
Tommy bars for box spanners - Specification (First Revision) |
PGD 34 |
| 410 |
IS 6007 : 1971 |
Specification for pipe vices (Hinged Type) |
PGD 34 |
| 411 |
IS 6086 : 2016 |
Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions and test values (Second Revision) |
PGD 34 |
| 412 |
IS 6087 : 1971 |
Specification for metal cutting shears |
PGD 34 |
| 413 |
IS/ISO 6789 : 2003 |
Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure |
PGD 34 |
| 414 |
IS 10619 : 1983 |
Specification for seasoned, spiced and sweetened cashewnuts |
FAD 24 |
| 415 |
IS 7975 : Part 2 : 2018 |
Assembly tools for screws and nuts - Driving parts for hand - Operated square drive socket wrenches: Part 2 dimensions and tests (Second Revision) |
PGD 34 |
| 416 |
IS 7991 : 2016 |
Attachment for hand operated square drive socket wrenches - Specification (Second Revision) |
PGD 34 |
| 417 |
IS 8669 : 2014 |
Assembly tools for screws and nuts - Drive ends for hand - And machine - Operated screwdriver bits and connecting parts - Dimensions, torque testing (Second Revision) |
PGD 34 |
| 418 |
IS 10621 : 1983 |
Specification for jelebi mix |
FAD 24 |
| 419 |
IS 11231 : 1985 |
Specification for milk bread |
FAD 24 |
| 420 |
IS 7692 : 1993 |
Headforms for testing of helmets - Specification (First Revision) |
CED 22 |
| 421 |
IS 12127 : 1987 |
Specification for two - Men cross cut saws |
PGD 34 |
| 422 |
IS 1158 : 1973 |
Specification for corn flakes (First Revision) |
FAD 24 |
| 423 |
IS 15438 : 2004 |
Coal - Determination of forms of sulphur |
PCD 7 |
| 424 |
IS 16143 : Part 2 : 2014 |
Hard coal and coke - Mechanical sampling: Part 2 coal - Sampling from moving streams |
PCD 7 |
| 425 |
IS 12516 : Part 1 : 2017 |
Methods for determination of physical characteristics of doughs made from wheat flour: Part 1 water absorption and rheological properties using a farinograph (Second Revision) |
FAD 24 |
| 426 |
IS 12516 : Part 3 : 1988 |
Method for determination of physical characteristics of doughs made from wheat flour: Part 3 water absorption and rheolog properties using a valorigraph |
FAD 24 |
| 427 |
IS 12564 : 1989 |
Fried jack fruit chips - Specification |
FAD 24 |
| 428 |
IS 12566 : 1989 |
Ready-to-eat extruded snacks - Specification |
FAD 24 |
| 429 |
IS 12711 : 1989 |
Bakery products - Methods of analysis |
FAD 24 |
| 430 |
IS 16143 : Part 6 : 2014 |
Hard coal and coke - Mechanical sampling: Part 6 coke - Preparation of test samples |
PCD 7 |
| 431 |
IS 13888 : 1993 |
Nippers - Lever assisted - End cutting - Specification |
PGD 34 |
| 432 |
IS 1006 : 1984 |
Specification for arrowroot starch (Second Revision) |
FAD 16 |
| 433 |
IS 1484 : 1974 |
Specification for rolled oats (Quick - Cooking Type) (First Revision) |
FAD 24 |
| 434 |
IS 1668 : 1975 |
Specification for lozenges (Second Revision) |
FAD 24 |
| 435 |
IS 10364 : 2001 |
Snap type back covers and bezel for watch cases -- Dimensions (First Revision) |
PGD 23 |
| 436 |
IS 10366 : 1995 |
Watch cases -- Crystal and dial opening diameters -- Dimensions (First Revision) |
PGD 23 |
| 437 |
IS 12471 : 1988 |
Dimensions for lengths of hands for clocks |
PGD 23 |
| 438 |
IS 2650 : 1975 |
Specification for bombay halwa (First Revision) |
FAD 24 |
| 439 |
IS 14338 : 1996 |
Basic and design profile of screw threads for watch bezel and back covers |
PGD 23 |
| 440 |
IS 3137 : 1974 |
Specification for high-protein mixes for use as food supplements (First Revision) |
FAD 24 |
| 441 |
IS 14339 : 1996 |
Horology -- Watch bezel and back cover gauges -- Technical supply conditions -- General |
PGD 23 |
| 442 |
IS 14365 : 1996 |
Horology -- Gauges for watch bezel and back covers -- Dimensions and tolerances |
PGD 23 |
| 443 |
IS 14560 : Part 2 : 1998 |
Horology -- Mineral and sapphire glass for wrist watch cases: Part 2 Gasket dimensions, material and test procedures -- Specification |
PGD 23 |
| 444 |
IS 15064 : 2002 |
Plastic movement holders for wrist watch cases -- Specification |
PGD 23 |
| 445 |
IS 5503 : Part 1 : 1969 |
General requirements for silos for grain storage: Part 1 constructional requirements |
FAD 16 |
| 446 |
IS 6287 : 1985 |
Methods of sampling and analysis for sugar confectionery (First Revision) |
FAD 24 |
| 447 |
IS 5606 : 1970 |
Specification for steel bins for grain storage |
FAD 16 |
| 448 |
IS 1105 : 1957 |
Method for precise conversion of inch and metric dimensions to ensure interchangeability |
PGD 1 |
| 449 |
IS 7272 : Part 1 : 1974 |
Recommendation for labour output constants for building work: Part 1 North Zone |
CED 29 |
| 450 |
IS 6360 : 1971 |
Specification for lacto bonbon |
FAD 24 |
| 451 |
IS 787 : 1956 |
Guide for inter - Conversion of values from one system of units to another |
PGD 1 |
| 452 |
IS 7021 : 2017 |
Protein - Rich food supplements for infants and pre - School children - Specification (First Revision) |
FAD 24 |
| 453 |
IS B786 : 1967 |
Guide for inter - Conversion of values from one system of units to another |
PGD 1 |
| 454 |
IS 7487 : 1986 |
Specification for protein - Enriched biscuits (First Revision) |
FAD 24 |
| 455 |
IS 15760 : Part 2 : 2007 |
Textiles machinery and accessories – Main dimensions of flat steel healds with open end loops – Part 2 J-shaped end loops |
TXD 14 |
| 456 |
IS 8211 : 1976 |
Specification for edible soya protein isolate |
FAD 24 |
| 457 |
IS 8212 : 1976 |
Specification for edible groundnut protein isolate |
FAD 24 |
| 458 |
IS 8220 : 1976 |
Specification for protein - Rich concentrated nutrient supplementary foods |
FAD 24 |
| 459 |
IS 8222 : 1976 |
Specification for edible leaf protein concentrate |
FAD 24 |
| 460 |
IS B3583 : 1988 |
burnt clay paving bricks (BI-LINGUAL) |
CED 30 |
| 461 |
IS H3583 : 1988 |
burnt clay paving bricks (HINDI) |
CED 30 |
| 462 |
IS 1960 : 1979 |
Specification for wheatmeal bread (Second Revision) |
FAD 24 |
| 463 |
IS 1084 : 2005 |
Textiles – Manila ropes – Specification (fifth revision) |
TXD 9 |
| 464 |
IS 8665 : 1977 |
Specification for protein - Fortified bread |
FAD 24 |
| 465 |
IS 9038 : 1979 |
Specification for reconstitutable protein beverage food |
FAD 24 |
| 466 |
IS 9095 : 1979 |
Specification for protein chewy candy |
FAD 24 |
| 467 |
IS 9487 : 1980 |
Specification for `Ready-to-eat' Protein-rich Extruded Foods |
FAD 24 |
| 468 |
IS 9488 : 1980 |
Specification for edible coconut protein concentrates |
FAD 24 |
| 469 |
IS 9712 : 1981 |
Specification for cakes |
FAD 24 |
| 470 |
IS 2860 : 1964 |
Methods of sampling and test for processed fruits and vegetable |
FAD 10 |
| 471 |
IS 2869 : 1964 |
Specification for canned orange segments |
FAD 10 |
| 472 |
IS 3246 : 1976 |
Specification for canned okra (Bhindi) (First Revision) |
FAD 10 |
| 473 |
IS 3247 : 1976 |
Specification for canned bitter gourd (Karela) (First Revision) |
FAD 10 |
| 474 |
IS 12674 : Part 2 : 1989 |
Methods of test for strength and stability of settees and benches: Part 2 stability |
CED 35 |
| 475 |
IS 5807 : Part 3 : 1971 |
Methods of test for clear finishes for wooden furniture: Part 3 Resistance to marking by oils and fats |
CED 35 |
| 476 |
IS 3501 : 1966 |
Specification for pickles |
FAD 10 |
| 477 |
IS 3543 : 1966 |
Specification for papain |
FAD 10 |
| 478 |
IS 5967 : Part 2 : 1988 |
Methods of test for strength and stability of tables and trolleys: Part 2 stability (First Revision) |
CED 35 |
| 479 |
IS 3547 : 1976 |
Specification for mango nectar (First Revision) |
FAD 10 |
| 480 |
IS 3882 : 1966 |
Specification for tomato ketchup |
FAD 24 |
| 481 |
IS 4624 : 1978 |
Specification for dehydrated peas (First Revision) |
FAD 10 |
| 482 |
IS 4627 : 1968 |
Specification for dehydrated cabbage |
FAD 10 |
| 483 |
IS 4936 : 1968 |
Specification for fruit squashes |
FAD 10 |
| 484 |
IS 7749 : 2016 |
Walnuts - Specification (First Revision) |
FAD 10 |
| 485 |
IS 8153 : 1986 |
Method for sensory evaluation of fresh fruits (First Revision) |
FAD 10 |
| 486 |
IS 10074 : 1982 |
Specification for compaction mould assembly for light and heavy compaction test for soils |
CED 43 |
| 487 |
IS 10077 : 1982 |
Specification for equipment for determination of shrinkage factors |
CED 43 |
| 488 |
IS 8786 : 1978 |
Specification for okra (BHINDI) canned in tomato sauce |
FAD 10 |
| 489 |
IS 10108 : 1982 |
Code of practice for sampling of soils by thin wall sampler with stationary piston |
CED 43 |
| 490 |
IS 9789 : 1981 |
Specification for canned apricot |
FAD 10 |
| 491 |
IS 10270 : 1982 |
Guidelines for design and construction of prestressed rock anchors |
CED 43 |
| 492 |
IS 9790 : 1981 |
Specification for canned french beans |
FAD 10 |
| 493 |
IS 9791 : 1981 |
Specification for canned tinda |
FAD 10 |
| 494 |
IS 9811 : 1981 |
Specification for canned kundri |
FAD 10 |
| 495 |
IS 9812 : 1981 |
Specification for canned spinach |
FAD 10 |
| 496 |
IS 9822 : 1981 |
Specification for canned parwal |
FAD 10 |
| 497 |
IS 9823 : 1981 |
Specification for canned potatoes |
FAD 10 |
| 498 |
IS 10119 : 1982 |
Specification for ready to use insecticides for spot application |
FAD 1 |
| 499 |
IS 10265 : 1982 |
Specification for endosulfan granules |
FAD 1 |
| 500 |
IS 10267 : 1982 |
Specification for phenthoate granules |
FAD 1 |
| 501 |
IS 10369 : 1982 |
Specification for ethion, technical |
FAD 1 |
| 502 |
IS 1050 : 1984 |
Specification for Lime Sulphur solution |
FAD 1 |
| 503 |
IS 10627 : 1983 |
Methods for sampling of pesticidal formulations |
FAD 1 |
| 504 |
IS 10946 : 1996 |
Methods of sampling for technical grade pesticides (First Revision) |
FAD 1 |
| 505 |
IS 10950 : 1984 |
Specification for phenthoate dusting powders |
FAD 1 |
| 506 |
IS 10442 : 1983 |
Specification for earth augers (Spiral Type) |
CED 43 |
| 507 |
IS 11007 : 1984 |
Specification for methabenzthiazuron, technical |
FAD 1 |
| 508 |
IS 10589 : 1983 |
Specification for equipment for subsurface sounding of soils |
CED 43 |
| 509 |
IS 11008 : 1984 |
Specification for methabenzthiazuron water dispersible powder concentrates |
FAD 1 |
| 510 |
IS 11019 : 1984 |
Specification for carbofuran, technical |
FAD 1 |
| 511 |
IS 11151 : 1984 |
Specification for barium carbonate, pesticidal grade |
FAD 1 |
| 512 |
IS 11784 : 1986 |
Specification for carbaryl lindane granules |
FAD 1 |
| 513 |
IS 11996 : 1987 |
Specification for deltamethrin EC |
FAD 1 |
| 514 |
IS 12003 : 1987 |
Specification for fenvalerate, technical |
FAD 1 |
| 515 |
IS 5038 : 1969 |
Specification for ice cube trays for domestic refrigerators |
MED 3 |
| 516 |
IS 12004 : 1987 |
Specification for isoproturon technical |
FAD 1 |
| 517 |
IS 9485 : 1980 |
Specification for cold - Reduced and hot - Rolled carbon steel sheet for porcelain enamelling |
MTD 4 |
| 518 |
IS 12005 : 1987 |
Specification for deltamethrin, technical |
FAD 1 |
| 519 |
IS 9476 : 1980 |
Specification for cold-rolled steel strips for carbon steel razor blades |
MTD 4 |
| 520 |
IS 12015 : 1987 |
Specification for cypermethrin technical |
FAD 1 |
| 521 |
IS 9442 : 1980 |
Specification for hot-rolled steel plates, sheets and strips for manufacture of agricultural tillage discs |
MTD 4 |
| 522 |
IS 12017 : 1987 |
Specification for cypermethrin technical concentrate |
FAD 1 |
| 523 |
IS/ISO 16163 : 2012 |
Continuously hot - Dipped coated steel sheet products - Dimensional and shape tolerances (First Revision) |
MTD 4 |
| 524 |
IS 1080 : 1985 |
Code of practice for design and construction of shallow foundations in soils (Other Than Raft, Ring And Shell) (Second Revision) |
CED 43 |
| 525 |
IS 10837 : 1984 |
Moulds And Accessories For Determination Of Density Index (relative Density) Of Cohesionless Soils |
CED 43 |
| 526 |
IS 11089 : 1984 |
Code of practice for design and construction of ring foundation |
CED 43 |
| 527 |
IS 11196 : 1985 |
Specification for equipment for determination of liquid limit of soils cone penetration met - Hod |
CED 43 |
| 528 |
IS 1312 : 1980 |
Specification for methyl bromide |
FAD 1 |
| 529 |
IS 12208 : 1987 |
Method for measurement of earth pressure by hydraulic pressure cell |
CED 43 |
| 530 |
IS 12070 : 1987 |
Code of practice for design and construction of shallow foundations on rocks |
CED 43 |
| 531 |
IS 2911 : Part 1 : Sec 4 : 2010 |
Design and construction of pile foundations - Code of practice: Part 1 concrete piles: Sec 4 precast concrete piles in prebored holes (First Revision) |
CED 43 |
| 532 |
IS 9556 : 1980 |
Code of practice for design and construction of diaphragm walls |
CED 43 |
| 533 |
IS 9456 : 1980 |
Code of practice for design and construction of conical and hyperbolic paraboloidal types of shell foundations |
CED 43 |
| 534 |
IS 9259 : 1979 |
Specification for liquid limit apparatus for soils |
CED 43 |
| 535 |
IS 9214 : 1979 |
Method of determination of modulus of subgrade reaction (K - Value) of soils in field |
CED 43 |
| 536 |
IS 12023 : 1987 |
Code of Practice for Field Monitoring of Movement of Structures Using Tape Extensometer |
CED 43 |
| 537 |
IS 11629 : 1986 |
Code of practice for installation and operation of single point hydraulic over - Flow setting gauge |
CED 43 |
| 538 |
IS 11594 : 1985 |
Specification for mild steel thin walled samplnig tubes and sampler heads |
CED 43 |
| 539 |
IS 11593 : 1986 |
Shear Box (large) For Testing Of Soils |
CED 43 |
| 540 |
IS 11550 : 1985 |
Code of practice for field instrumentation of swelling pressure in expansive soils |
CED 43 |
| 541 |
IS 11233 : 1985 |
Code of practice for design and construction of radar antenna, microwave and TV tower foundations |
CED 43 |
| 542 |
IS 11229 : 1985 |
Specification for shear box for testing of soils |
CED 43 |
| 543 |
IS 11209 : 1985 |
Specification for mould assembly for determination of permeability of soils |
CED 43 |
| 544 |
IS 9759 : 1981 |
Guidelines for dewatering during construction |
CED 43 |
| 545 |
IS 9716 : 1981 |
Guide for lateral dynamic load test on piles |
CED 43 |
| 546 |
IS 9669 : 1980 |
Specification for cbr moulds and its accessories |
CED 43 |
| 547 |
IS 13775 : Part 1 : 1993 |
Conveyor belting - Solid woven cotton/synthetic impregnated and unimpregnated - Specification: Part 1 aeroslide belting for air gravity conveyor |
PGD 40 |
| 548 |
IS 9640 : 1980 |
Specification for split spoon sampler |
CED 43 |
| 549 |
IS 14696 : 2000 |
Transmission steel roller chains and chain wheels for oil field applications - Specification |
PGD 33 |
| 550 |
IS 8009 : Part 2 : 1980 |
Code of practice for calculation of settlement of foundations: Part 2 deep foundations subjected to symmetrical static vertical loading z |
CED 43 |
| 551 |
IS 6403 : 1981 |
Code of practice for determination of bearing capacity of shallow foundations |
CED 43 |
| 552 |
IS 2974 : Part 5 : 1987 |
Code of practice for design and construction of machine foundations: Part 5 foundations for impact machines other than hammer (Forging and stamping press, pig breaker, drop crusher and jolter) (First Revision) |
CED 43 |
| 553 |
IS 2974 : Part 4 : 1979 |
Code of practice for design and construction of machine foundations: Part 4 foundations for rotary type machines of low frequency |
CED 43 |
| 554 |
IS 2950 : Part 1 : 1981 |
Code of practice for design and construction of raft foundations: Part 1 design (Second Revision) |
CED 43 |
| 555 |
IS 2911 : Part 4 : 2013 |
Design and construction of pile foundations - Code of practice: Part 4 load test on piles (Second Revision) |
CED 43 |
| 556 |
IS 2974 : Part 2 : 1980 |
Code of pracrrIce for design and construction of machine foundations: Part 2 foundations for impact type machines (Hammer Foundations) (First Revision) |
CED 43 |
| 557 |
IS 2974 : Part 1 : 1982 |
Code of practice for design and construction of machine foundations: Part 1 foundation for reciprocating type machines (Second Revision) |
CED 43 |
| 558 |
IS 4332 : Part 10 : 1969 |
Methods of test for stabilized soils: Part 10 Test for soil-bituminous mixtures |
CED 43 |
| 559 |
IS 4332 : Part 9 : 1970 |
Methods of test for stabilized soils: Part 9 Determination of the bituminous stabilizer content of bitumen and tar stabilized soils |
CED 43 |
| 560 |
IS 4332 : Part 8 : 1969 |
Methods of test for stablized soils: Part 8 Determination of lime content of lime stablized soils |
CED 43 |
| 561 |
IS 4332 : Part 6 : 1972 |
Methods of test for stabilized soils: Part 6 Flexural strength of soil-cement using simple beam with third-point loading |
CED 43 |
| 562 |
IS 4332 : Part 5 : 1970 |
Methods of test for stabilizd soils: Part 5 Determination of unconfined compressive strength of stablized soils |
CED 43 |
| 563 |
IS 4332 : Part 4 : 1968 |
Methods of test for stabilized soils: Part 4 Wetting and drying, and freezing and thawing tests for compacted soil-cement mixtures |
CED 43 |
| 564 |
IS 4332 : Part 3 : 1967 |
Methods of test for stabilized soils: Part 3 Test for determination of moisture content-dry density relation for stablized soil mixtures |
CED 43 |
| 565 |
IS 4332 : Part 2 : 1967 |
Methods of test for stabilized soils: Part 2 Determination of moisture content of stabilized soil mixtures |
CED 43 |
| 566 |
IS 4332 : Part 1 : 1967 |
Methods of test for stabilized soils: Part 1 Method of sampling and preparation of stabilized soils for testing |
CED 43 |
| 567 |
IS 4091 : 1979 |
Code of practice for design and construction of foundations for transmission line towers and poles (First Revision) |
CED 43 |
| 568 |
IS 1498 : 1970 |
Classification and identification of soils for general engineering purposes (First Revision) |
CED 43 |
| 569 |
IS 1888 : 1982 |
Method of load test on soils (Second Revision) |
CED 43 |
| 570 |
IS 15146 : 2002 |
Belt drives - Pulleys - Limiting values for adjustment of centres |
PGD 40 |
| 571 |
IS 2131 : 1981 |
Method for Standard Penetration Test for Soils (First Revision) |
CED 43 |
| 572 |
IS 2132 : 1986 |
Code of Practice for Thin-Walled Tube Sampling of Soils (Second Revision) |
CED 43 |
| 573 |
IS 2720 : Part 1 : 1983 |
Methods of test for soils: Part 1 preparation of dry soil samples for various tests (Second Revision) |
CED 43 |
| 574 |
IS 2720 : Part 11 : 1993 |
Methods of test for soils: Part 11 determination of the shear strength parameters of a specimen tested in unconsolidated undrained triaxial compression without the measurement of pore water pressure (First Revision) |
CED 43 |
| 575 |
IS 2720 : Part 12 : 1981 |
Methods of test for soils: Part 12 determination of shear strength parameters of soil from consolidated undrained triaxial compression test with measurement of pore water pressure (First Revision) |
CED 43 |
| 576 |
IS 2720 : Part 13 : 1986 |
Methods of test for soils: Part 13 Direct shear test |
CED 43 |
| 577 |
IS 2720 : Part 14 : 1983 |
Methods of test for soils: Part 14 determination of density index (Relative Density) of cohesionless soils (First Revision) |
CED 43 |
| 578 |
IS 2720 : Part 15 : 1965 |
Methods of test for soils: Part 15 determination of consolidation properties (First Revision) |
CED 43 |
| 579 |
IS 2720 : Part 16 : 1987 |
Methods of test for soils: Part 16 laboratory determination of cbr (Second Revision) |
CED 43 |
| 580 |
IS 2720 : Part 20 : 1992 |
Methods of test for soils: Part 20 determination of linear shrinkage (First Revision) |
CED 43 |
| 581 |
IS 2720 : Part 2 : 1973 |
Methods of test for soils: Part 2 determination of water content (Second Revision) |
CED 43 |
| 582 |
IS 14727 : 1999 |
Fenarimol EC - Specification |
FAD 1 |
| 583 |
IS 2720 : Part 21 : 1977 |
Methods of test for soils: Part 21 determination of total soluble solids (First Revision) |
CED 43 |
| 584 |
IS 2720 : Part 22 : 1972 |
Methods of test for soils: Part 22 determination of organic matter (First Revision) |
CED 43 |
| 585 |
IS 2720 : Part 23 : 1976 |
Methods of test for soils: Part 23 Determination of calcium carbonate |
CED 43 |
| 586 |
IS 2720 : Part 24 : 1976 |
Methods of test for soils: Part 24 determination of cation exchange capacity (First Revision) |
CED 43 |
| 587 |
IS 2720 : Part 25 : 1982 |
Methods of test for soils: Part 25 determination silica sesquioxide ratio (First Revision) |
CED 43 |
| 588 |
IS 2720 : Part 26 : 1987 |
Method of test for soils: Part 26 determination of pH value (Second Revision) |
CED 43 |
| 589 |
IS 15510 : 2004 |
Heavy - Duty cranked - Link transmission chains |
PGD 33 |
| 590 |
IS 15569 : 2005 |
Widening test on nuts |
PGD 37 |
| 591 |
IS 2720 : Part 27 : 1977 |
Methods of test for soils: Part 27 determination of total soluble sulphates (First Revision) |
CED 43 |
| 592 |
IS 2720 : Part 28 : 1974 |
Methods of test for soils: Part 28 determination of dry density of soils, in - Place, by the sand replacement method (First Revision) |
CED 43 |
| 593 |
IS 2720 : Part 29 : 1975 |
Methods of test for soils: Part 29 determination of dry density of soils in - Place by the core - Cutter method (First Revision) |
CED 43 |
| 594 |
IS 2720 : Part 3 : Sec 1 : 1980 |
Methods of Test for Soils: Part 3 Determination of Specific Gravity: Section 1 Fine Grained Soils (First Revision) |
CED 43 |
| 595 |
IS 2720 : Part 3 : Sec 2 : 1980 |
Methods of Test for Soils: Part 3 Determination of Specific Gravity: Section 2 Fine, Medium and Coarse Grained Soils (First Revision) |
CED 43 |
| 596 |
IS 207 : 1964 |
Specification for gate and shutter hooks and eyes (Revised) |
PGD 37 |
| 597 |
IS 2720 : Part 30 : 1980 |
Methods of test for soils: Part 30 Laboratory vane shear test |
CED 43 |
| 598 |
IS 2720 : Part 33 : 1971 |
Methods of test for soils: Part 33 Determination of the density in place by the ring and water replacement method |
CED 43 |
| 599 |
IS 2720 : Part 34 : 1972 |
Methods of test for soils: Part 34 Determination of density of soil in-place by rubber-balloon method |
CED 43 |
| 600 |
IS 2720 : Part 35 : 1974 |
Methods of test for soils: Part 35 Measurement of negative pore water pressure |
CED 43 |
| 601 |
IS 2720 : Part 37 : 1976 |
Methods of test for soils: Part 37 Determination of sand equivalent values of soils and fine aggregates |
CED 43 |
| 602 |
IS 1486 : 1978 |
Specification for copper oxychloride, technical |
FAD 1 |
| 603 |
IS 2720 : Part 39 : Sec 1 : 1977 |
Methods of test for soils: Part 39 Direct shear test for soils containing gravel, Section 1 Laboratory test |
CED 43 |
| 604 |
IS 2720 : Part 39 : Sec 2 : 1979 |
Methods of test for soils: Part 39 Direct shear test for soils containing gravel, Section 2 In-situ shear test |
CED 43 |
| 605 |
IS 2720 : Part 4 : 1985 |
Methods of test for soils: Part 4 grain size analysis (Second Revision) |
CED 43 |
| 606 |
IS 2720 : Part 40 : 1977 |
Methods of test for soils: Part 40 determination of free swell index of soils |
CED 43 |
| 607 |
IS 2720 : Part 41 : 1977 |
Methods of test for soils: Part 41 measurement of swelling pressure of soils |
CED 43 |
| 608 |
IS 2720 : Part 5 : 1985 |
Methods of test for soils: Part 5 determination of liquid and plastic limit (Second Revision) |
CED 43 |
| 609 |
IS 2720 : Part 6 : 1972 |
Methods of test for soils: Part 6 determination of shrinkage factors (First Revision) |
CED 43 |
| 610 |
IS 2720 : Part 7 : 1980 |
Methods of test for soils: Part 7 determination of water content - Dry density relation using light compaction (Second Revision) |
CED 43 |
| 611 |
IS 2720 : Part 8 : 1983 |
Methods of test for soils: Part 8 determination of water content - Dry density relation using heavy compaction (Second Revision) |
CED 43 |
| 612 |
IS 2720 : Part 9 : 1992 |
Methods of test for soils: Part 9 determination of dry density - Moisture content relation by constant mass of soil method (First Revision) |
CED 43 |
| 613 |
IS 2643 : 2005 |
Pipe threads where pressure - Tight joints are not made on the threads - Dimensions, tolerances and designation (Third Revision) |
PGD 37 |
| 614 |
IS 1200 : Part 12 : 1976 |
Method of measurement of building and clVil engineering works: Part 12 plastering and pointing (Third Revision) |
CED 44 |
| 615 |
IS 1200 : Part 18 : 1974 |
Method of measurement of building and civil engineering works: Part 18 demolition and dismantling (Third Revision) |
CED 44 |
| 616 |
IS 2086 : 1993 |
Carriers and bases in rewirable type electric fuses for voltages up to 650 v - Specification (Third Revision) |
ETD 39 |
| 617 |
IS 1200 : Part 19 : 1981 |
Method of measurement of building and civil engineering works: Part 19 water supply, plumbing and drains |
CED 44 |
| 618 |
IS 1200 : Part 21 : 1973 |
Method of measurement of building and civil engineering works: Part 21 wood - Work and joinery (Second Revision) |
CED 44 |
| 619 |
IS 1200 : Part 22 : 1982 |
Method of measurement of building and civil engineering works: Part 22 materials |
CED 44 |
| 620 |
IS 1200 : Part 26 : 1987 |
Method of measurement of building and civil engineering work: Part 26 acid resistant lining |
CED 44 |
| 621 |
IS 1200 : Part 3 : 1976 |
Method of Measurement of Building and Civil Engineering Works - Part III : Brickwork |
CED 44 |
| 622 |
IS 1200 : Part 4 : 1976 |
Method of measurement of building and civil engineering works: Part 4 stone masonry (Third Revision) |
CED 44 |
| 623 |
IS 1200 : Part 6 : 1974 |
Method of measurement of building and civil engineering works: Part 6 refractory work (Second Revision) |
CED 44 |
| 624 |
IS 1506 : 1977 |
Specification for copper oxychloride dusting powders (Second Revision) |
FAD 1 |
| 625 |
IS 12308 : Part 12 : 1992 |
Methods for Chemical Analysis of Cast Iron and Pig Iron: Part 12 Determination of copper by atomic absorption spectrometric method (for copper 0.01 to 0.5 percent) |
MTD 34 |
| 626 |
IS 12308 : Part 4 : 1988 |
Methods for chemical analysis of cast iron and pig iron: Part 4 determination of total carbon, graphitic carbon and combined carbon by gravimetric method |
MTD 34 |
| 627 |
IS 554 : 1999 |
Pipe threads where pressure - Tight joints are made on the threads - Dimensions, tolerances and designation (Fourth Revision) |
PGD 37 |
| 628 |
IS 5957 : 2003 |
Screw threads for thread forming tapping screws dimensions (Second Revision) |
PGD 37 |
| 629 |
IS 6094 : Part 1 : 2006 |
Hexagon socket set screws: Part 1 with flat point (Third Revision) |
PGD 37 |
| 630 |
IS 6094 : Part 2 : 2006 |
Hexagon socket set screws: Part 2 with cone point (Third Revision) |
PGD 37 |
| 631 |
IS 6094 : Part 3 : 2006 |
Hexagon socket set screws: Part 3 with dog point (Third Revision) |
PGD 37 |
| 632 |
IS 6094 : Part 4 : 2006 |
Hexagon socket set screws: Part 4 with cup point (Third Revision) |
PGD 37 |
| 633 |
IS 6862 : 2005 |
Clews pins without head (Second Revision) |
PGD 37 |
| 634 |
IS 6863 : 2005 |
Clevis pins with head (Second Revision) |
PGD 37 |
| 635 |
IS 10050 : 1981 |
Method for determination of slake durability index of rocks |
CED 48 |
| 636 |
IS 10082 : 1981 |
Method of test for determination of tensile strength by indirect tests on rock specimens |
CED 48 |
| 637 |
IS 10782 : 1983 |
Method for the laboratory determination of dynamic modulus of rock core specimens |
CED 48 |
| 638 |
IS/ISO 9373 : 1989 |
Cranes and related equipment - Accuracy requirements for measuring parameters during testing |
MED 14 |
| 639 |
IS 725 : 1961 |
Specification for copper wire nails (Revised) |
PGD 37 |
| 640 |
IS 8070 : 1991 |
Screws - Slotted capstan (Tommy bolts) - Specification (First Revision) |
PGD 37 |
| 641 |
IS 866 : 1957 |
Specification forTinmens Rivets |
PGD 37 |
| 642 |
IS 919 : Part 2 : 2014 |
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes: Part 2 tables of standard tolerance classes and limit deviation for holes and shafts (Second Revision) |
PGD 37 |
| 643 |
IS 9549 : Part 2 : 2014 |
Fasteners - Bolts, screws and studs - Head slots for bolts (First Revision) |
PGD 37 |
| 644 |
IS B196 : 1966 |
Atmospheric Conditions for Testing (Revised)(BI-LINGUAL) |
PGD 1 |
| 645 |
IS 9143 : 1979 |
Method for the determination of unconfined compressive strength of rock materials |
CED 48 |
| 646 |
IS 9179 : 1979 |
Method for preparation of rock specimen for laboratory testing |
CED 48 |
| 647 |
IS 9221 : 1979 |
Method for the determination of modulus of elasticity and Poisson's ratio of rock materials in uniaxial compression |
CED 48 |
| 648 |
IS 12231 : 1987 |
Specification for Unplasticized PVC Pipes for Use in Suction and Delivery Lines of Agricultural Pump Sets |
CED 50 |
| 649 |
IS 10550 : 1983 |
Specification for medical treatment lamps |
MHD 15 |
| 650 |
IS 11302 : Part 1 : 1985 |
Electro-encephalograph (EEG) - Part 1 : General and Safety Requirements |
MHD 15 |
| 651 |
IS 11302 : Part 2 : 1985 |
Specification for electroencephalograph (EEG): Part 2 performance requirements |
MHD 15 |
| 652 |
IS 11393 : 1985 |
Specification for scintillation counters |
MHD 15 |
| 653 |
IS 11753 : 1986 |
Specification for electrical impedance plethysmograph |
MHD 15 |
| 654 |
IS 7634 : Part 1 : 1975 |
Code of Practice for Plastics Pipe Work for Potable Water Supplies: Part 1 Choice of Materials and General Recommendations |
CED 50 |
| 655 |
IS 11458 : 1985 |
Specification For Parallel Clamps |
PGD 34 |
| 656 |
IS 13379 : 1992 |
Forestry tools - Wooden setting cat, bow saw blades - Specification |
PGD 34 |
| 657 |
IS 3890 : Part 2 : 1967 |
Specification for instruments, plastic filling, dental: Part ii designation numbers 12, 20, 21, 46, 47, 153 and 183 |
MHD 8 |
| 658 |
IS 847 : 1968 |
Specification for Smith Fullers (First Revision) |
PGD 34 |
| 659 |
IS 4316 : 1991 |
Orthodontic pliers, snipe nose - Shape,dimensions and tests (First Revision) |
MHD 8 |
| 660 |
IS 4680 : 1968 |
Specification ,for spatula, wax, dental, No. 2 |
MHD 8 |
| 661 |
IS 5004 : 1968 |
Specification for spoons, cutting dental, No. 1/2, 3/4 and 5/6 |
MHD 8 |
| 662 |
IS 4977 : 1968 |
Forceps, Extraction, Dental, Lower Molar, Hawk's Bill, No. 1 |
MHD 8 |
| 663 |
IS 8360 : Part 1 : 1977 |
fabricated high density polyethylene (HDPE) fittings for potable water supplies: Part 1 General requirements |
CED 50 |
| 664 |
IS 8360 : Part 2 : 1977 |
fabricated high density polyethylene (MDPE) fittings for potable water supplies, Part 2 Specific requirements for 90 degree tees |
CED 50 |
| 665 |
IS 8360 : Part 3 : 1977 |
fabricated high density polyethylene (HDPE) fittings for potable water supplies, Part 3 Specifc requirements for 90 degree bends |
CED 50 |
| 666 |
IS 4296 : Part 1 : 2016 |
Tools for pressing: Part 1 round punches with 60 degrees conical head and straight shank (Second Revision) |
PGD 4 |
| 667 |
IS 4296 : Part 4 : 2002 |
Tools for pressing: Part 4 round punches with 60 " conical head and reduced shank (First Revision) |
PGD 4 |
| 668 |
IS 4593 : 1968 |
Test chart for straight - Sided presses |
PGD 4 |
| 669 |
IS 4592 : 2002 |
Acceptance conditions of open mechanical front power presses - Testing of accuracy (First Revision) |
PGD 4 |
| 670 |
IS 12852 : 1989 |
Gap frame hydraulic presses up to 4000 KN - Recommendation on preferred capacities and dimensions |
PGD 4 |
| 671 |
IS 14878 : 2000 |
Test chart for plate bending machines |
PGD 4 |
| 672 |
IS 10297 : 1982 |
Code of practice for design and construction of floors and roofs using precast reinforced/prestressed concrete ribbed or cored slab units |
CED 32 |
| 673 |
IS 11447 : 1985 |
Code of practice for construction with large panel prefabricates |
CED 32 |
| 674 |
IS 5795 : 1991 |
Orthodontic pliers, Crown and ligating, Howe's pattern - Shape, dimensions and tests |
MHD 8 |
| 675 |
IS 5941 : 1970 |
Specification for dental engine, electric |
MHD 8 |
| 676 |
IS 6037 : 1970 |
Specification for zinc oxide - Eugenol dental impression paste |
MHD 8 |
| 677 |
IS 6039 : 1970 |
Specification for zinc oxide - Eugenol dental cement |
MHD 8 |
| 678 |
IS 6043 : 1970 |
Specification for copper phosphate - Zinc phosphate dental cement |
MHD 8 |
| 679 |
IS 5197 : 1987 |
Recommendations for layout and planning of drawing offices (First Revision) |
CED 51 |
| 680 |
IS 6829 : 1991 |
Dental instruments - Orthodontic pliers, angle wire bending - Shape, dimensions and tests (First Revision) |
MHD 8 |
| 681 |
IS 6868 : 1991 |
Dental instruments - Dental extraction forceps - Specification (First Revision) |
MHD 8 |
| 682 |
IS 10790 : Part 1 : 1984 |
Methods of Sampling of Steel for Prestressed and Reinforced Concrete: Part 1 Prestressing Steel |
CED 54 |
| 683 |
IS 10790 : Part 2 : 1984 |
Methods of Sampling of Steel for Prestressed and Reinforced Concrete: Part 2 Reinforcing Steel |
CED 54 |
| 684 |
IS 1566 : 1982 |
Specification for Hard - Drawn Steel Wire Fabric for Concrete Reinforcement (Second Revision) |
CED 54 |
| 685 |
IS 1785 : Part 1 : 1983 |
Specification for Plain Hard - Drawn Steel Wire for Prestressed Concrete: Part 1 Cold Drawn Stress - Relieved Wire (Second Revision) |
CED 54 |
| 686 |
IS 1785 : Part 2 : 1983 |
Specification for Plain Hard Drawn Steel Wire for Prestressed Concrete: Part 2 As-Drawn Wire (First Revision) |
CED 54 |
| 687 |
IS 2090 : 1983 |
Specification for High Tensile Steel Bars Used in Prestressed Concrete (First Revision) |
CED 54 |
| 688 |
IS 7456 : 1994 |
Rock drill shanks and chuck bushings - Dimensions (First Revision) |
PGD 8 |
| 689 |
IS 7995 : 1994 |
Pneumatic concrete breaker shanks - Dimensions (First Revision) |
PGD 8 |
| 690 |
IS 7333 : 1991 |
Orthodontic pliers, spring forming - Shape and dimensions (First Revision) |
MHD 8 |
| 691 |
IS 7338 : 1991 |
Orthodontic pliers, band removing, posterior - Shape and dimensions (First Revision) |
MHD 8 |
| 692 |
IS 3150 : 1982 |
Hexagonal Wire Netting for General Purposes |
CED 55 |
| 693 |
IS 5258 : 1969 |
Determination of particle size of powders by optical microscope method |
CED 55 |
| 694 |
IS 2861 : 1980 |
Specification for diazinon emulsifiable concentrates |
FAD 1 |
| 695 |
IS 10679 : 1983 |
Specificati - On for photoelectric spectrophotometer (Single Beam Type) |
PGD 39 |
| 696 |
IS 10695 : 1983 |
Specification for pocket stereoscope |
PGD 22 |
| 697 |
IS 11152 : 1984 |
Specification for laboratory stands (Metallic) |
PGD 22 |
| 698 |
IS 11444 : 1985 |
Specification for grinding and polishing materials for optical components |
PGD 39 |
| 699 |
IS 11445 : 1985 |
Specification for parallax bar (Stereometer) |
PGD 22 |
| 700 |
IS 11781 : 1986 |
Specification for stencil templates and pen tips for english lettering |
PGD 22 |
| 701 |
IS 11961 : 1986 |
Specification for 4 - Metre levelling staff (Telescopic) |
PGD 22 |
| 702 |
IS 11267 : 1985 |
Method of test for length distribution (Wet Classification Of Fibre Length) of chrysotile asbestos fibre using turner and newall classifier |
CED 53 |
| 703 |
IS 12874 : 1989 |
Optical and mathematical instruments - Telescopic alidade - specification |
PGD 39 |
| 704 |
IS 11275 : 1985 |
Method of test for determination of crudiness and grit content of asbestos fibre |
CED 53 |
| 705 |
IS 11276 : 1985 |
Method of test for determination of openness or fiberization of chrysotile asbestos fibre by air permeability method using rapid surface area apparatus |
CED 53 |
| 706 |
IS 11451 : 1986 |
Recommendations for safety and health requirements relating to occupational exposure to asbestos |
CED 53 |
| 707 |
IS 14253 : 1995 |
Educational instrumentsand equipment - Wire gauze for school and laboratory use - Specification |
PGD 22 |
| 708 |
IS 14440 : 1997 |
Drawing Instruments - Tubular Tips For Hand Held Technical Pens Using India Ink On Tracing Paper - Specification |
PGD 22 |
| 709 |
IS 14633 : 1999 |
Blackboards for class rooms - Specification |
PGD 22 |
| 710 |
IS 1480 : 1970 |
Specification metric scales for general purposes (First Revision) |
PGD 22 |
| 711 |
IS 1481 : 1970 |
Specification for metric steel scales for engineers (First Revision) |
PGD 22 |
| 712 |
IS 3284 : 1984 |
Specification for organo mercurial dry seed - dressing formulations |
FAD 1 |
| 713 |
IS 12888 : 1989 |
Optical and mathematical instruments - Short range infrared distance measuring instruments specification |
PGD 39 |
| 714 |
IS 1492 : 1970 |
Specification for metric surveying chains (First Revision) |
PGD 22 |
| 715 |
IS 15197 : 2002 |
Kerosene heating lamp for use in school and college laboratories - Specification |
PGD 22 |
| 716 |
IS 15242 : 2002 |
Magnets (for Use In Schools And--Colleges) — Specification |
PGD 22 |
| 717 |
IS 15242 : 2002 |
Magnets (For Use In Schools And Colleges) - Specification |
PGD 22 |
| 718 |
IS 7853 : 1975 |
Specification for surveyor, cast, dental |
MHD 8 |
| 719 |
IS 7966 : 1976 |
Specification for dental modelling wax |
MHD 8 |
| 720 |
IS 3904 : 1966 |
Specification for thiometon concentrates |
FAD 1 |
| 721 |
IS 8020 : 1976 |
Specification for baseplate, dental |
MHD 8 |
| 722 |
IS 2174 : 1962 |
Specification for reinforced concrete dust bins |
CED 53 |
| 723 |
IS 2185 : Part 2 : 1983 |
Specification for concrete masonry units: Part 2 hollow and solid lightweight concrete blocks (First Revision) |
CED 53 |
| 724 |
IS 2185 : Part 3 : 1984 |
Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks |
CED 53 |
| 725 |
IS 8529 : 1989 |
Dentalinstruments - Pliers,posterior band forming,double beak specification (First Revision) |
MHD 8 |
| 726 |
IS 8571 : 1977 |
Specification for dental porcelain |
MHD 8 |
| 727 |
IS 8948 : 1989 |
Dental instruments - Pliers, ligature tying - Specification (First Revision) |
MHD 8 |
| 728 |
IS 8949 : 1989 |
Dental Instruments - Pliers, Curved, Howe's Pattern |
MHD 8 |
| 729 |
IS 2193 : 1986 |
Precast Prestressed Concrete Street Lighting Poles |
CED 53 |
| 730 |
IS 9003 : 1978 |
Specification for acrylizer (Curing Unit) |
MHD 8 |
| 731 |
IS 9932 : 1981 |
Specification for recommendations for lighting of dental operatories |
MHD 8 |
| 732 |
IS 1833 : 1980 |
Specification for diazinon, technical (First Revision) |
FAD 1 |
| 733 |
IS 3905 : 1966 |
Specification for thiometon emulsifiable concentrates |
FAD 1 |
| 734 |
IS 3632 : 1969 |
Method Of Test For Determination Of Wet Volume Of Asbestos Fibre |
CED 53 |
| 735 |
IS 4350 : 1967 |
concrete porous pipes for under-drainage |
CED 53 |
| 736 |
IS 4844 : 1968 |
Method of sampling and preparation of asbestos fibre for laboratory test purposes |
CED 53 |
| 737 |
IS 5328 : 1969 |
Method of test for determination of chemical composition of asbestos fibre |
CED 53 |
| 738 |
IS 5748 : 1969 |
Method of test for tensile strength of asbestos fibre |
CED 53 |
| 739 |
IS 5751 : 1984 |
Specification for precast concrete coping blocks (First Revision) |
CED 53 |
| 740 |
IS 5820 : 1970 |
Specification for precast concrete cable covers |
CED 53 |
| 741 |
IS 4323 : 1980 |
Specification for endosulfan emulsifiable concentrates |
FAD 1 |
| 742 |
IS 4324 : 1967 |
Specification for endosulfan water dispersible powder concentrates |
FAD 1 |
| 743 |
IS 6041 : 1985 |
Code of practice for construction of autoclaved cellular concrete block masonry (First Revision) |
CED 53 |
| 744 |
IS 4344 : 1978 |
Specification for endosulfan technical |
FAD 1 |
| 745 |
IS 6042 : 1969 |
Code of practice for construction of light - Weight concrete block masonry |
CED 53 |
| 746 |
IS 6441 : Part 1 : 1972 |
Methods of test for autoclaved cellular concrete products: Part 1 determination of unit weight or bulk density and moisture content |
CED 53 |
| 747 |
IS 6441 : Part 2 : 1972 |
Methods of test for autoclawed cellular concrete products: Part 2 determination of drying shrinkage |
CED 53 |
| 748 |
IS 6441 : Part 4 : 1972 |
Methods of test for autoclaved cellular concrete products: Part 4 corrosion protection of steel reinforcement in autoclave cellular concrete |
CED 53 |
| 749 |
IS 6441 : Part 5 : 1972 |
Methods of test for autoclaved cellular concrete products: Part 5 determination of compressive strength |
CED 53 |
| 750 |
IS 6441 : Part 6 : 1973 |
Methods of test for autoclaved cellular concrete products: Part 6 strength, deformation and cracking of flexural members subjects to bending, short duration loading test |
CED 53 |
| 751 |
IS 6441 : Part 7 : 1973 |
Methods of test for autoclaved cellular concrete products: Part 7 strength, deformation and cracking of flexural members subject to bending sustained loading test |
CED 53 |
| 752 |
IS 6441 : Part 8 : 1973 |
Methods of tests for autoclave cellular concrete products: Part 8 loading tests for flexural members in diagonal tension |
CED 53 |
| 753 |
IS 6441 : Part 9 : 1973 |
Methods of test for autoclaved cellular concrete products: Part 9 jointing of autoclaved cellular concrete elements |
CED 53 |
| 754 |
IS 6523 : 1983 |
Precast Reinforced Concrete Door and Window Frames |
CED 53 |
| 755 |
IS 7319 : 1974 |
perforated concrete pipes |
CED 53 |
| 756 |
IS 7321 : 1974 |
Code of practice for selection, handling and erection of concrete poles for overhead power and telecommunication lines |
CED 53 |
| 757 |
IS 7322 : 1985 |
specials for steel cylinder reinforced concrete pipes |
CED 53 |
| 758 |
IS 7639 : 1975 |
Methods of sampling of asbestos cement products |
CED 53 |
| 759 |
IS 11466 : Part 2 : 1985 |
Guidelines for packing, stowage and securing of cargo inside the freight containers: Part 2 dangerous goods |
TED 33 |
| 760 |
IS 11646 : Part 1 : 2003 |
Cane for visually handicapped - Specification: Part 1 rigid, long and white (First Revision) |
MHD 9 |
| 761 |
IS 8870 : 1978 |
Specification for asbestos cement cable conduits and troughs |
CED 53 |
| 762 |
IS 9375 : 1979 |
Precast Reinforced Concrete Plant Guards |
CED 53 |
| 763 |
IS 9627 : 1980 |
Specification for asbestos cement pressure pipes (Light Duty) |
CED 53 |
| 764 |
IS 9690 : 1980 |
Method of test for determination of openness or fiberization of chrysotile asbestos fibre by air permeability method using dyckerhoff apparatus |
CED 53 |
| 765 |
IS 9691 : 1980 |
Metho - D of test for length distribution (wet classification of fibre length) of chrysotile asbestos fibre using bauermcNett classifier |
CED 53 |
| 766 |
IS 9745 : 1981 |
Method for determining strength giving properties of asbestos fibre |
CED 53 |
| 767 |
IS 9872 : 1981 |
Specification for precast concrete septic tanks |
CED 53 |
| 768 |
IS 9893 : 1981 |
Precast Concrete Blocks For Lintels And Sills |
CED 53 |
| 769 |
IS 12664 : Part 1 : 2003 |
Artificial limbs - Sach foot for lower extremity prostheses: Part 1 design and dimensions (First Revision) |
MHD 9 |
| 770 |
IS 12683 : Part 1 : 1989 |
Measuring devices for visually impaired persons - Specification: Part 1 scale, general purposes |
MHD 9 |
| 771 |
IS 12683 : Part 2 : 1989 |
Artificial limbs - Measuring devices for visually impaired persons: Part 2 type |
MHD 9 |
| 772 |
IS 12683 : Part 3 : 2000 |
Measuring devices for visually impaired persons - Specification: Part 3 goniometer |
MHD 9 |
| 773 |
IS 13017 : 1991 |
Rehabilitation equipment - Walker rollator - Specification |
MHD 9 |
| 774 |
IS 13822 : 1993 |
Braille duplicating sheet specification |
MHD 9 |
| 775 |
IS 13837 : 1993 |
Braille duplicating machine specification |
MHD 9 |
| 776 |
IS 14723 : 1999 |
Artificial limbs - Knee shin assembly - Specification |
MHD 9 |
| 777 |
IS 14879 : 2000 |
Anterior spinal hyperextension (ASH) brace - Specification |
MHD 9 |
| 778 |
IS 15268 : Part 1 : 2002 |
Optics and Optical Instruments - Microscopes - Slides - Part 1 : Dimensions, Optical Properties and Marking |
PGD 22 |
| 779 |
IS 15270 : Part 1 : 2002 |
Optics and Optical Instruments - Microscopes - Cover Glasses - Part 1 : Dimensional Tolerances, Thickness and Optical Properties |
PGD 22 |
| 780 |
IS 4535 : 1968 |
Specification for saw - Grip terminal device for artificial limbs |
MHD 9 |
| 781 |
IS 1632 : 1993 |
Optical instruments - Bubbles - Specification (First Revision) |
PGD 39 |
| 782 |
IS 1764 : 1961 |
Specification for trough compass |
PGD 22 |
| 783 |
IS 4554 : 1968 |
Specification for hammers terminal devices, ball pein and claw, for artificial limbs |
MHD 9 |
| 784 |
IS 1955 : 1961 |
Specification for prismatic compass, liquid |
PGD 22 |
| 785 |
IS 1957 : 1961 |
Specification for prismatic compasses, non - Liquid |
PGD 22 |
| 786 |
IS 2286 : 1963 |
Specification for pantograph |
PGD 22 |
| 787 |
IS 2288 : 1963 |
Specification for ranging rods |
PGD 22 |
| 788 |
IS 2533 : 1978 |
Specification for geometry boxes (First Revision) |
PGD 22 |
| 789 |
IS 2539 : 1963 |
Specification for plane tables |
PGD 22 |
| 790 |
IS 2754 : 1964 |
Genral requirements for optical instruments |
PGD 39 |
| 791 |
IS 2466 : 1963 |
Specification for beam compasses |
PGD 22 |
| 792 |
IS 4556 : 1968 |
Specification for typing finger terminal device for artificial limbs |
MHD 9 |
| 793 |
IS 4567 : 1968 |
Specification for pliers terminal device, quick - Grip, for artificial limbs |
MHD 9 |
| 794 |
IS 4675 : 1968 |
Specification for light split - Hook device for artificial limbs |
MHD 9 |
| 795 |
IS 4677 : 1968 |
Specification for steering appliance for artificial limbs |
MHD 9 |
| 796 |
IS 5015 : 1969 |
Specification for knife - Terminal device for artificial limbs |
MHD 9 |
| 797 |
IS 2976 : 1964 |
Specification for optical theodolite |
PGD 39 |
| 798 |
IS 2988 : 1995 |
Vernier theodolite - Specification (First Revision) |
PGD 22 |
| 799 |
IS 3081 : 1994 |
Microscopes - General purposes - Dimensions and marking (First Revision) |
PGD 22 |
| 800 |
IS 3135 : 1965 |
Specieication for cathetometer |
PGD 39 |
| 801 |
IS 3208 : 1989 |
Engineers drawing instruments - Half set of compasses - Specification (First Revision) |
PGD 22 |
| 802 |
IS 3210 : 1989 |
Engineers' Drawing Instruments - Drawing Pens |
PGD 22 |
| 803 |
IS 3211 : 1991 |
Engineers Drawing Instruments, Pen Points (First Revision) |
PGD 22 |
| 804 |
IS 3212 : 1991 |
Engineers' drawings instruments, lengthening bars |
PGD 22 |
| 805 |
IS 3213 : 1991 |
Engineers Drawing Instruments - Handles - Specification (First Revision) |
PGD 22 |
| 806 |
IS 3215 : 1991 |
Engineers Drawing Instruments - Needle Points - Specification ( First Revision ) |
PGD 22 |
| 807 |
IS 3217 : 1991 |
Engineers Drawing Instruments, Prickers - Specification ( First Revision ) |
PGD 22 |
| 808 |
IS 3218 : 1968 |
Specification for parallel rulers, 150 mm (Link Type) |
PGD 22 |
| 809 |
IS 3219 : 1966 |
Specification For Engineers Drawing Instruments, Boxes for Leads and Needles |
PGD 22 |
| 810 |
IS 3221 : 1966 |
Sets for drawing instruments |
PGD 22 |
| 811 |
IS 3686 : 1966 |
Specification for student - Type microscope |
PGD 22 |
| 812 |
IS 4329 : 1967 |
Specification for measuring (Travelling) microscope |
PGD 22 |
| 813 |
IS 4380 : 1967 |
Specification for abney level |
PGD 22 |
| 814 |
IS 5146 : 1969 |
Specification for sounding sextant |
PGD 22 |
| 815 |
IS 5148 : 1969 |
Specification for hand magnifiers (Circular) - 50, 75 and 100 mm |
PGD 22 |
| 816 |
IS 5153 : 1969 |
Specification for proportional compasses - 150, 200 and 300 mm |
PGD 22 |
| 817 |
IS 5204 : 1969 |
Specifiction for research microscope |
PGD 22 |
| 818 |
IS 5694 : 1970 |
Specification For Engineers, Drawing Instruments, Dotting Pens |
PGD 22 |
| 819 |
IS 5706 : 1993 |
Optical instruments - Spirit levels for use in precision engineering - Specification (First Revision) |
PGD 39 |
| 820 |
IS 5726 : 1970 |
Specification For Engineers Drawing Instruments, Bordering Pens |
PGD 22 |
| 821 |
IS 5737 : 1970 |
Specification For Engineers Drawing Instruments, Curve Pens |
PGD 22 |
| 822 |
IS 3209 : 1989 |
Engineers Drawing Instruments - Spring Bow Compasses - Specification ( First Revision ) |
PGD 22 |
| 823 |
IS 5145 : 1969 |
Specification for walking sticks |
MHD 9 |
| 824 |
IS 5150 : 1969 |
Specification for rubber tips for crutches and walking sticks |
MHD 9 |
| 825 |
IS 5928 : 1970 |
Specification for tangent clinometer |
PGD 22 |
| 826 |
IS 6425 : 1971 |
Specification for dioptometer (Lensometer) |
PGD 22 |
| 827 |
IS 6471 : 1971 |
Specification for spectrometer (Student Type) |
PGD 39 |
| 828 |
IS 7010 : 1973 |
Specification for pivots for magnetic compasses |
PGD 22 |
| 829 |
IS 7011 : 1973 |
Specification for back - Silvered mirrors used in insturment industry |
PGD 39 |
| 830 |
IS 7544 : 1975 |
Specification For Parallel Ruler ( Roller Type ) |
PGD 22 |
| 831 |
IS 7545 : 1975 |
Specification for optical bench (Advanced Type) |
PGD 39 |
| 832 |
IS 8311 : 1976 |
Specification for instrument jewels |
PGD 22 |
| 833 |
IS 8330 : 2004 |
Tripods for surveying instruments - Fixed leg type - Specification (Second Revision) |
PGD 22 |
| 834 |
IS 8622 : 1999 |
Wire wound sliding contact rheostats for use in educational institutions - Specification (First Revision) |
PGD 22 |
| 835 |
IS 8630 : 1977 |
Specification For Engineers Drawing Instruments, Double Line Pens |
PGD 22 |
| 836 |
IS 8651 : 1977 |
Specification for flame photometer |
PGD 39 |
| 837 |
IS 8679 : 1978 |
Specification for triangular scales |
PGD 22 |
| 838 |
IS 8691 : 1986 |
Specification for mirror stereoscope (First Revision) |
PGD 39 |
| 839 |
IS 8916 : 1978 |
Specification for spherometbr |
PGD 22 |
| 840 |
IS 9107 : 1979 |
Specification for autocollimator |
PGD 39 |
| 841 |
IS 9514 : 1980 |
Specification for front surface aluminized mirrors |
PGD 39 |
| 842 |
IS 9865 : 1981 |
Specification for laboratory weights |
PGD 22 |
| 843 |
IS 9892 : 1981 |
Specification for subtense bar |
PGD 22 |
| 844 |
IS/ISO 9180 : 1998 |
Black leads for wood - Cased pencils - Classification and diameters |
PGD 22 |
| 845 |
IS/ISO 9179 : PART 1 : 1988 |
Technical drawings - Numerically controlled draughting machines |
PGD 22 |
| 846 |
IS 6099 : 1991 |
Rehabilitation equipement - Invalid walkers with crutches - Specification (Second Revision) |
MHD 9 |
| 847 |
IS 14802 : Part 1 : 2000 |
Plain bearings - Hardness testing of bearing metals: Part 1 compoundmaterials |
PGD 13 |
| 848 |
IS 14803 : Part 2 : 2000 |
Part 2 tolerances on form and position and surface - Roughness for shafts, flanges and thrust collars |
PGD 13 |
| 849 |
IS 3823 : 2014 |
Rolling bearings -- Static load ratings (Third Revision) |
PGD 13 |
| 850 |
IS 6302 : 1971 |
Specification for whirlpool bath |
MHD 9 |
| 851 |
IS 6571 : 1991 |
Rehabilitation equipment - Wheelchairs, non - Folding, adult size, institutional model - Specification (First Revision) |
MHD 9 |
| 852 |
IS 5934 : 1999 |
Rolling bearings -- Chamfer dimensions -- Maximum values -- Specification (Second Revision) |
PGD 13 |
| 853 |
IS 13547 : Part 1 : 2010 |
Manipulating industrial robots -- Mechanical interfaces: Part 1 Plates (second revision) |
PGD 18 |
| 854 |
IS 15031 : 2001 |
Manipulating industrial robots - Application oriented test - Spot welding |
PGD 18 |
| 855 |
IS 15033 : 2001 |
Manipulating industrial robots - Emc) test methods and performance evaluation criteria - Guidelines |
PGD 18 |
| 856 |
IS 15034 : 2001 |
Manipulating industrial robots - Informative guide on test equipment and metrology methods of operation for robot performance evaluation in accordance with is 14533:1998 |
PGD 18 |
| 857 |
IS 15292 : 2003 |
Manipulating industrial robots - Graphical user interfaces for programming and operation of robots (Gui - R) |
PGD 18 |
| 858 |
IS 15294 : 2003 |
Industrial Automation Systems and Integration - Operating Conditions for Discrete Part Manufacturing - Equipment in Industrial Environments |
PGD 18 |
| 859 |
IS 15295 : 2003 |
Electric resistance welding - Integrated transformers for welding guns |
PGD 18 |
| 860 |
IS 15571 : 2005 |
Industrial automation glossary |
PGD 18 |
| 861 |
IS 10473 : 1983 |
Specification for Cloud Searchlight |
PGD 21 |
| 862 |
IS 11121 : 1984 |
Specification for pyranograph, bimetallic |
PGD 21 |
| 863 |
IS 11875 : 1986 |
Specification for diffuse pyranometer |
PGD 21 |
| 864 |
IS 11876 : 1986 |
Specification for airmeter |
PGD 21 |
| 865 |
IS 12781 : 1989 |
Marine bucket for sea surface temperature measurement - Specification |
PGD 21 |
| 866 |
IS 15216 : 2002 |
Balloons - Meteorological |
PGD 21 |
| 867 |
IS 15243 : 2002 |
Velocity scale set for meteorological purposes |
PGD 21 |
| 868 |
IS 15253 : 2002 |
Dew gauge - Specification |
PGD 21 |
| 869 |
IS 4849 : 1992 |
Meteorology - Rain measures - Specification (First Revision) |
PGD 21 |
| 870 |
IS 5235 : 1992 |
Meteorology - raingauges recording - specification (First Revision) |
PGD 21 |
| 871 |
IS 5798 : 1970 |
Specification for mercury barometers |
PGD 21 |
| 872 |
IS 6805 : 1973 |
Specification for assmann psychrometer |
PGD 21 |
| 873 |
IS 7243 : 1974 |
Specification for sunshine recorder |
PGD 21 |
| 874 |
IS 7244 : 1974 |
Specification for thermometer for mercury barometer |
PGD 21 |
| 875 |
IS 5900 : 1970 |
Specification for hair hygrograph |
PGD 21 |
| 876 |
IS 5901 : 1970 |
Specification for thermograph, bimetallic |
PGD 21 |
| 877 |
IS 5912 : 1997 |
Specification for anemometer, cup counter (First Revision) |
PGD 21 |
| 878 |
IS 5924 : 1988 |
Specification for clock mechanisms and drums for meteorological instruments (First Revision) |
PGD 21 |
| 879 |
IS 5945 : 1970 |
Specification for barograph, aneroid |
PGD 21 |
| 880 |
IS 5946 : 1992 |
Meteorology - Whirling psychrometer - Specification (First Revision) |
PGD 21 |
| 881 |
IS 5947 : 1970 |
Charts for recording meteorological instruments |
PGD 21 |
| 882 |
IS 5973 : 1998 |
Pan Evaporimeter - Specification (First Revision) |
PGD 21 |
| 883 |
IS 1269 : Part 1 : 1997 |
Leagal metrology - Material measures of length: Part 1 woven metallic and glass fiber tape measures (Second Revision) |
PGD 26 |
| 884 |
IS 1269 : Part 2 : 1997 |
Legal metrology - Material measures of length: Part 2 steel tape measures |
PGD 26 |
| 885 |
IS 1433 : 1990 |
Beam scales - Specification (Second Revision) |
PGD 26 |
| 886 |
IS 1437 : 1967 |
Specification for automatic weighing machines |
PGD 26 |
| 887 |
IS 1519 : Part 2 : 1983 |
Method for temperature measurement of petroleum and its products: Part 2 above atmospheric pressure (First Revision) |
PGD 26 |
| 888 |
IS 15672 : 2006 |
Flow measurement of natural gas and fluids by coriolis meters |
PGD 26 |
| 889 |
IS 1702 : 1967 |
Specification for Spring Balances ( First Revision ) |
PGD 26 |
| 890 |
IS 1854 : 1964 |
Specification for Person-weighing machines |
PGD 26 |
| 891 |
IS 2007 : 1974 |
Method for calibration of vertical oil storage tanks (First Revision) |
PGD 26 |
| 892 |
IS 2008 : 1961 |
Method For Computation of Capacity Tables For Vertical Oil Storage Tanks |
PGD 26 |
| 893 |
IS 2009 : 1975 |
Method for calibration of horizontal and tilted oil storage tanks (First Revimn) |
PGD 26 |
| 894 |
IS 2166 : 1963 |
Method for computation of capavity tables for horizontal and tilted oil storage tanks |
PGD 26 |
| 895 |
IS 2383 : 1963 |
Code of practice for calibration of vehicle tanks for petroleum products and other liquids |
PGD 26 |
| 896 |
IS 3960 : 1967 |
Specification for totaling weighing machines |
PGD 26 |
| 897 |
IS 4070 : 1967 |
Wheel Weighers |
PGD 26 |
| 898 |
IS 8818 : 1977 |
Methods for measurement of petroleum gases and town gas in bulk |
PGD 26 |
| 899 |
IS 2489 : 1963 |
Specificatttion for Baby Weighing Machines |
PGD 26 |
| 900 |
IS 2808 : 1964 |
Method for computation of capacity tables for pressurized storage tanks |
PGD 26 |
| 901 |
IS 2827 : 1976 |
Methods for calibration of pressurized storage tanks (First Revision) |
PGD 26 |
| 902 |
IS 3033 : 1965 |
Accuracy requirements for dispensing pumps used in petroleum trade |
PGD 26 |
| 903 |
IS 3515 : 1966 |
Specification For Tapes For Use In Measurement Of Oil Quantities |
PGD 26 |
| 904 |
IS 888 : 1983 |
Specification for hollow - Ground razors, open type (Second Revision) |
PGD 14 |
| 905 |
IS 989 : 1982 |
Specification for scissors for general purposes (Second Revision) |
PGD 14 |
| 906 |
IS 10198 : 1982 |
Specification for carbon steel, safety razor blades |
PGD 14 |
| 907 |
IS 13973 : 1994 |
Shaving systems - Disposable razors -- Specification |
PGD 14 |
| 908 |
IS 2917 : 1981 |
Specificationfor umbrella ribs (First Revision) |
PGD 14 |
| 909 |
IS 4066 : 1967 |
Specification for metal hooks, clips and eyes |
PGD 14 |
| 910 |
IS 4798 : 1968 |
Specification for safety pins |
PGD 14 |
| 911 |
IS 5348 : 1981 |
Specification for staples (First Revision) |
PGD 14 |
| 912 |
IS 7371 : 1982 |
Specification for stainless steel, safety razor blades (Second Revision) |
PGD 14 |
| 913 |
IS 6810 : 1990 |
Rehabilitation equipment - Metal tripod and tetrapod sticks - Specification (First Revision) |
MHD 9 |
| 914 |
IS 6812 : 2003 |
Knee joint, uniaxial for below knee prostheses - Specification (Second Revision) |
MHD 9 |
| 915 |
IS 7373 : 2003 |
Hip disarticulation joint unit for lower limb prosthetic fitments - Specification (Second Revision) |
MHD 9 |
| 916 |
IS 7454 : 1991 |
Rehabilitation equipment - Wheelchairs, folding, adult size - Specification (First Revision) |
MHD 9 |
| 917 |
IS 8086 : 1991 |
Rehabilitation equipment - Wheelchairs, folding, junior size - Specification (First Revision) |
MHD 9 |
| 918 |
IS 1804 : 2004 |
Steel wire ropes – Fibre main cores – Specification (fourth revision) |
TXD 9 |
| 919 |
IS 1887 : 1985 |
Specification for spun jute yarn (second revision) |
TXD 9 |
| 920 |
IS 9471 : Part 6 : 2000 |
Modular lower limb orthotic components part 6 orthotic hip joint (Joint Unit, Hip Drop Lock) - Specification |
MHD 9 |
| 921 |
IS 9471 : Part 7 : 2000 |
Modular lower limb orthotic components - Specification: Part 7 orthotic joint bars, ankle and knee (Upper And Lower) |
MHD 9 |
| 922 |
IS 3512 : 1966 |
Specification for Toolmakers Straightedges |
PGD 25 |
| 923 |
IS 4960 : 1968 |
Specification for universal and elongated type V - Blocks |
PGD 25 |
| 924 |
IS 5273 : 1969 |
Specification for radius gauges |
PGD 25 |
| 925 |
IS 5440 : 1969 |
Specification for optical flats |
PGD 25 |
| 926 |
IS 10269 : 1982 |
Specification for haemocytometer counting chambers clinical and diagnostic apparatus |
MHD 10 |
| 927 |
IS 10916 : 1984 |
Specification for evacuated tubes for blood specimen - Collection (Vacutainers) |
MHD 10 |
| 928 |
IS 1108 : 1975 |
Specification for pharmaceutical glass containers (Second Revision) |
MHD 12 |
| 929 |
IS 12622 : 1989 |
Medical thermometers for hypothermia, subnormal range - Specification |
MHD 10 |
| 930 |
IS 14193 : 1994 |
Ovulation thermometers - Specification |
MHD 12 |
| 931 |
IS 7327 : 2003 |
Engineering metrology - Measuring equipment - Granite surface plates - Specification (Second Revision) |
PGD 25 |
| 932 |
IS 8999 : 2003 |
Pipe threads where pressure - Tight joints are made on the threads - Verification by means of limit gauges (First Revision) |
PGD 25 |
| 933 |
IS/ISO 10360 : Part 2 : 1994 |
Coordinate Metrology - Part 2 Performance Assessment of Coordinate Measuring Machines |
PGD 25 |
| 934 |
IS 15110 : 2002 |
Veterinary thermometers, mercury - In - Glass type - Specification |
MHD 12 |
| 935 |
IS 15113 : 2002 |
Clinical electrical thermometers with maximum device - Specification |
MHD 12 |
| 936 |
IS 1528 : Part 7 : 2010 |
Methods of sampling and physical tests for refractory materials: Part 7 methods of sampling and criteria for conformity (Second Revision) |
MTD 15 |
| 937 |
IS 5279 : 1969 |
Specification for dicofol emulsifiable concentrates |
FAD 1 |
| 938 |
IS 3055 : Part 1 : 1994 |
Clinical thermometers: Part 1 solid stem type - Specification (Second Revision) |
MHD 10 |
| 939 |
IS 3055 : Part 2 : 2004 |
Clinical thermometers: Part 2 enclosed scale type - Specification (Third Revision) |
MHD 10 |
| 940 |
IS 3423 : 1973 |
Specification for glass contafners for transfusion fluids (First Revision) |
MHD 12 |
| 941 |
IS 3741 : Part 1 : 1990 |
Medical instruments sedimentation tubes - Specification: Part 1 westergren tube (Second Revision) |
MHD 10 |
| 942 |
IS 3741 : Part 2 : 1990 |
Medical glass instruments - Sedimentation tubes - Specification: Part 2 wintrobe tube (Second Revision) |
MHD 10 |
| 943 |
IS 3742 : 1990 |
Medical glass instruments - Pipettes, dilution for haemocytometers specification (Second Revision) |
MHD 10 |
| 944 |
IS 4067 : 1967 |
Specification for tube, swab (West Type), for throat |
MHD 10 |
| 945 |
IS 4363 : 1980 |
Specification for drip counter E. M. S. pattern (First Revision) |
MHD 12 |
| 946 |
IS 4381 : 1967 |
Specification for pathological microscope |
MHD 10 |
| 947 |
IS 4444 : 1967 |
Specification for bottles, bacteriological |
MHD 10 |
| 948 |
IS 4529 : 1968 |
Specification for glass tubes for medical thermometers |
MHD 10 |
| 949 |
IS 1389 : 1984 |
Methods for testing cotton fabrics for resistance to attack by micro-organisms (first revision) |
TXD 5 |
| 950 |
IS 9430 : 1980 |
Specification for tube, haemometer |
MHD 10 |
| 951 |
IS 14849 : Part 2 : 2018 |
Hydraulic fluid power - Determination of characteristics of motors: Part 2 startability (First Revision) |
PGD 36 |
| 952 |
IS 8384 : 2013 |
Hydraulic fluid power - Filter elements - Verification of collapse/burst pressure rating (First Revision) |
PGD 36 |
| 953 |
IS 11364 : 1994 |
Anaesthetic Reservoir Bags |
MHD 11 |
| 954 |
IS 1180 : Part 2 : 1989 |
Outdoor Type Three-phase Distribution Transformers Up To And Including 100 Kva 11 Kv:part 2 Sealed Type |
ETD 16 |
| 955 |
IS 7089 : 1973 |
Limited Supply Plugs |
PGD 19 |
| 956 |
IS 3391 : 1965 |
Specification for stethoscopes |
MHD 11 |
| 957 |
IS 3392 : 1965 |
Specification for anaesthetic airways |
MHD 11 |
| 958 |
IS 3393 : 1965 |
Specification for mouth props and airways (London Hospital Pattern) |
MHD 11 |
| 959 |
IS 4113 : Part 1 : 2003 |
Laryngoscopic fittings: Part 1 conventional hook - On type handle - Blade fittings (Second Revision) |
MHD 11 |
| 960 |
IS 4113 : Part 2 : 2003 |
Laryngoscopic fittings: Part 2 miniature electric lamps - Screw threads and sockets for conventional blades (Second Revision) |
MHD 11 |
| 961 |
IS 4154 : 1967 |
Specification for endotracheal connections |
MHD 11 |
| 962 |
IS 4533 : 1995 |
Suction apparatus - Specification (Second Revision) |
MHD 11 |
| 963 |
IS 5622 : 1970 |
Soda-Lime Canisters for Use with Gas Anaesthetic Apparatus ( Waters' to-and-Fro) |
MHD 11 |
| 964 |
IS 1850 : 1961 |
Dimensions for shank diameters and driving squares for rotating tools |
PGD 32 |
| 965 |
IS 9775 : 2000 |
Carbide flats, squares and rounds -- Dimensions (first revision) |
PGD 32 |
| 966 |
IS 5680 : 1969 |
Specification for rubber tubing for medical use |
MHD 11 |
| 967 |
IS 1928 : 1961 |
Specification for boiler rivets (12 To 48 Mm Diameter) |
PGD 37 |
| 968 |
IS 15248 : 2002 |
Self-Centring Chucks for Machine Tools with Two-Piece Jaws (Tongue and Groove Type) - Sizes for Interchangeability and Acceptance Test Specifications |
PGD 35 |
| 969 |
IS 2013 : 1995 |
T - Slots - Dimensions and spacings (Third Revision) |
PGD 35 |
| 970 |
IS 6190 : 1971 |
Specification for anaesthetic face masks |
MHD 11 |
| 971 |
IS 6194 : 1971 |
Specification for intermittent positive pressure respirator, bag type, manually operated |
MHD 11 |
| 972 |
IS 6207 : 1971 |
Specification for trolleys for oxygen cylinders |
MHD 11 |
| 973 |
IS 6581 : 1972 |
Specification for endotracheal tubes (Rubber) |
MHD 11 |
| 974 |
IS 7176 : 1985 |
Specification for anaesthetic apparatus, drawover portable type (First Revision) |
MHD 11 |
| 975 |
IS 7409 : Part 1 : 2003 |
Anaesthetic and Respiratory Equipment - Conical Connectors - Part 1 : Cones and Sockets |
MHD 11 |
| 976 |
IS 2063 : Part 2 : 2016 |
Test code for machine tools: Part 2 determination of accuracy and repeatability of positioning of numerically controlled axes (First Revision) |
PGD 35 |
| 977 |
IS 2200 : Part 3 : 2002 |
Test Conditions for Milling Machines with Table of Variable Height - Testing of Accuracy - Part 3 : Machines with Vertical Spindle |
PGD 35 |
| 978 |
IS 8165 : 2010 |
Acceptance conditions of mechanical dividing heads for machine tools - Testing of accuracy (First Revision) |
PGD 35 |
| 979 |
IS 4172 : 2005 |
General purpose bolts and screws - Metric series - Radii under the head (Second Revision) |
PGD 37 |
| 980 |
IS 11740 : 2014 |
Motorcycle chains - Characteristics and test methods (First Revision) |
PGD 33 |
| 981 |
IS 7885 : 1985 |
Spray, Macintosh's Pattern |
MHD 11 |
| 982 |
IS 4696 : Part 1 : 2004 |
DIMENSIONS FOR METRIC BUTTRESS THREADS PART 1 THREAD PROFILES (Second Revision) |
PGD 37 |
| 983 |
IS 4696 : Part 2 : 2004 |
DIMENSIONS FOR METRIC BUTTRESS THREADS PART 2 PITCH DIAMETER COMBINATIONS (Second Revision) |
PGD 37 |
| 984 |
IS 4696 : Part 3 : 2004 |
Dimensions for metric buttress threads: Part 3 basic dimensions (Second Revision) |
PGD 37 |
| 985 |
IS 7478 : 2011 |
Cross recesses for screws (Second Revision) |
PGD 37 |
| 986 |
IS 9667 : 1980 |
Specification for tridemorph, technical |
FAD 1 |
| 987 |
IS 9656 : 1980 |
Specification for tridemorph emulsifiable concentrates |
FAD 1 |
| 988 |
IS 9372 : 1980 |
Specification for methyl parathion, technical concentrate |
FAD 1 |
| 989 |
IS 9370 : 1980 |
Specification for lindane granules |
FAD 1 |
| 990 |
IS 9368 : 1980 |
Specification for carbaryl granules |
FAD 1 |
| 991 |
IS 9361 : 1980 |
Specificanon for alachlor granules |
FAD 1 |
| 992 |
IS 9358 : 1980 |
Specification for triallate emulsifiable concentrates |
FAD 1 |
| 993 |
IS 9357 : 1980 |
Specification for triallate, technical |
FAD 1 |
| 994 |
IS 6178 : 1982 |
Specification for pyrethrum dusting powders (First Revision) |
FAD 1 |
| 995 |
IS 634 : 1965 |
Specification for ethylene dichloride - Carbon tetrachloride mixture (3 : 1 v/v) |
FAD 1 |
| 996 |
IS 7121 : 1973 |
Specification for carbaryl water dispersible powder concentrates |
FAD 1 |
| 997 |
IS 7122 : 1984 |
Specification for carbaryl dusting powders (First Revision) |
FAD 1 |
| 998 |
IS 4492 : 1968 |
Specification for welded V - Blocks (Diameter Range 300 To 2000 Mm) |
PGD 25 |
| 999 |
IS 2341 : 1963 |
Specification for large metric capacity calibrating measures (Non - Tilting type) |
PGD 26 |
| 1000 |
IS 7539 : 1975 |
Specification for carbaryl, technical |
FAD 1 |
| 1001 |
IS 7943 : 1976 |
Specification for trichlorfon dusting powders |
FAD 1 |
| 1002 |
IS 3181 : 1992 |
Conveyor belts - Fire resistant conveyor belting for underground mines and such other hazardous applications - Specification (Second Revision) |
PGD 40 |
| 1003 |
IS 7945 : 1976 |
Specification for trichlorfon, technical |
FAD 1 |
| 1004 |
IS 2538 : 1963 |
Test chart for bench grinders |
PGD 35 |
| 1005 |
IS 4762 : 2002 |
FASTENERS — WORM DRIVE HOSE CLAMPS FOR GENERAL PURPOSES — SPECIFICATION ( Second Revision ) |
PGD 37 |
| 1006 |
IS 8025 : 1990 |
Monocrotophos,technical specification (Second Revision) |
FAD 1 |
| 1007 |
IS 12375 : Part 5 : 1998 |
Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 5 : Determination of Resistance to Static Load of Head and Neck Region of Stemmed Femoral Components |
MHD 2 |
| 1008 |
IS 12375 : Part 6 : 2018 |
Implants for surgery - Partial and total hip joint prostheses Part 6 endurance properties testing and performance requirements of neck region of stemmed femoral components (First Revision) |
MHD 2 |
| 1009 |
IS 12375 : Part 7 : 1998 |
Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 7 : Endurance Performance of Stemmed Femoral Components without Application of Torsion |
MHD 2 |
| 1010 |
IS 12375 : Part 8 : 1998 |
Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 8 : Endurance Performance of Stemmed Femoral Components with Application of torsion |
MHD 2 |
| 1011 |
IS 12375 : Part 9 : 1998 |
Implants for surgery - Partial and total hip joint prostheses Part 9 Determination of resistance to torque of head fixation of stemmed femoral components |
MHD 2 |
| 1012 |
IS 12376 : Part 1 : 2015 |
Implants for surgery - Components for partial and total knee joint prostheses Part 1 classification, definitions and designation of dimensions (Second Revision) |
MHD 2 |
| 1013 |
IS 8071 : 1976 |
Specification for propanil, technical |
FAD 1 |
| 1014 |
IS 14227 : 1995 |
Implants for surgery - Fixation devices for use in the ends of the femur in adults |
MHD 2 |
| 1015 |
IS 14228 : 1996 |
Implants for surgery - Staples with parallel legs for orthopaedic use - General requirements |
MHD 2 |
| 1016 |
IS 4838 : 1990 |
Anthropometric dimensions for school children age group 5 - 17 years (Second Revision) |
PGD 15 |
| 1017 |
IS 7567 : 1993 |
Automatic circuit reclosers |
ETD 8 |
| 1018 |
IS 14229 : 1995 |
Implants for surgery - Determination of bending strength and stiffness of bone plates |
MHD 2 |
| 1019 |
IS 14239 : 1995 |
Orthopaedic Drilling Instruments - Drill Bits, Taps and Countersink Cutters |
MHD 2 |
| 1020 |
IS 14240 : 1995 |
Orthopaedic implants - General requirements for marking, packaging and labelling |
MHD 2 |
| 1021 |
IS 5347 : Part 1 : 1986 |
Requirements for orthopaedic implants Part 1 general requirements (Second Revision) |
MHD 2 |
| 1022 |
IS 5347 : Part 12 : 1993 |
Requirements for orthopaedic implants Part 12 Wrought cobalt-nickel-chromium molybdenum tungsten iron alloy |
MHD 2 |
| 1023 |
IS 5347 : Part 13 : 1997 |
Requirements for orthopaedic implants Part 13 Wrought high nitrogen stainless steel |
MHD 2 |
| 1024 |
IS 5347 : Part 14 : 1997 |
Requirements for orthopaedic implants Part 14 Wrought titanium 5-aluminium 2,5-iron alloy |
MHD 2 |
| 1025 |
IS 5347 : Part 15 : 1997 |
Requirements for orthopaedic implants Part 15 Wrought titanium 6-aluminium 7-niobium alloy |
MHD 2 |
| 1026 |
IS 5347 : Part 16 : 2002 |
Requirements for Orthopaedic Implants - Part 16 : Poly (L-Lactide) Resins and Fabricated Forms for Surgical Implants - In Vitro Degradation Testing |
MHD 2 |
| 1027 |
IS 5347 : Part 17 : 2002 |
Requirements for orthopedic implants Part 17 metallic materials - Unalloyed tantalum for surgical implant applications |
MHD 2 |
| 1028 |
IS 5347 : Part 18 : 2002 |
Requirements for orthopedic implants: Part 18 ceramic materials based on yttria - Stabilized tetragonal zirconia (Y - TZP) |
MHD 2 |
| 1029 |
IS 5347 : Part 2 : 1993 |
Requirements for orthopaedic Implants Part 2 Wrought stainless steel |
MHD 2 |
| 1030 |
IS 5347 : Part 4 : 1996 |
Requirements for orthopaedic implants Part 4 Wrought titanium 6-aluminium 4- vanadium alloy |
MHD 2 |
| 1031 |
IS 5347 : Part 5 : 2000 |
Requirements for Orthopaedic Implants - Part 5 : Cobalt-chromium-molybdenum Casting Alloy |
MHD 2 |
| 1032 |
IS 5347 : Part 6 : 1996 |
Requirements for orthopaedic implants Part 6 Wrought-cobalt-chromium tungsten-nickel alloy |
MHD 2 |
| 1033 |
IS 5347 : Part 7 : 2002 |
Requirements for Orthopaedic Implants - Part 7 : Wrought Cobalt-Nickel-Chromium-Molybdenum Alloy |
MHD 2 |
| 1034 |
IS 5347 : Part 8 : 1997 |
Requirements for orthopaedic implants Part 8 Forgeable and cold-formed-cobalt-chromium-nickel-molybdenum-iron alloy |
MHD 2 |
| 1035 |
IS 5347 : Part 9 : 1998 |
Requirements for orthopaedic implants: Part 9 ceramic materials based on high purity alumina (First Revision) |
MHD 2 |
| 1036 |
IS 5848 : 1996 |
Implants for surgery - Skeletal pins and wires - Steinmann skeletal pins - Dimensions (First Revision) |
MHD 2 |
| 1037 |
IS 12572 : Part 13 : 1995 |
Biological Evaluation of Medical Devices - Part 13 : Tests for Genotoxicity, Carcinogenicity and Reproductive Toxicity |
MHD 19 |
| 1038 |
IS 12572 : Part 14 : 1994 |
Biological Evaluation of Medical Devices - Part 14 : Selection of Tests for Interactions with Blood |
MHD 19 |
| 1039 |
IS/ISO 13606-3 : 2009 |
Health informatics - Electronic health record communication: Part 3 references archetypes and term lists |
MHD 17 |
| 1040 |
IS/ISO 18308 : 2011 |
Health informatics - Requirements for an electronic health record architecture |
MHD 17 |
| 1041 |
IS 10250 : 1982 |
Specification for severities for environmental tests for automotive electrical equipment |
TED 11 |
| 1042 |
IS 1062 : 2014 |
Road vehicles - Spark - Plugs - Test methods and requirements (Third Revision) |
TED 11 |
| 1043 |
IS 1606 : 1979 |
Specification for automobile lamps (Second Revision) |
TED 11 |
| 1044 |
IS 2077 : 2014 |
Automotive vehicles - Electric relays - Specification (Third Revision) |
TED 11 |
| 1045 |
IS 2081 : 1998 |
Automotive vehicles - Taper terminal cable connectors for batteries - Specification (Second Revision) |
TED 11 |
| 1046 |
IS 2325 : 1981 |
Specification for ignition coils for battery - Coil ignition systems for automobiles (First Revision) |
TED 11 |
| 1047 |
IS 2577 : Part 1 : 2018 |
Road Vehicles - Fuse-Links Part 1 Definitions and General Test Requirements (Third Revision) |
TED 11 |
| 1048 |
IS 2577 : Part 2 : 2018 |
Road Vehicles – Fuse-Links Part 2 User’s Guide (Third Revision) |
TED 11 |
| 1049 |
IS 2577 : Part 4 : 2018 |
Road Vehicles - Fuse Links Part 4 Fuse-links with Female Contacts (Type A) and Bolt-In Contacts (Type B) and their Test Fixtures (Third Revision) |
TED 11 |
| 1050 |
IS 2577 : Part 5 : 2018 |
Road Vehicles - Fuse Links Part 5 Links with Axial Terminals (Strip Fuse-links) Types SF30 and SF51 and Test Fixtures (Third Revision) |
TED 11 |
| 1051 |
IS 2577 : Part 6 : 2012 |
Road vehicles - Fuse - Links: Part 6 single - Bolt fuse - Links (Second Revision) |
TED 11 |
| 1052 |
IS 2577 : Part 7 : 2012 |
Road vehicles - Fuse - Links: Part 7 fuse - Links with tabs (Type G) with rated voltage of 450 V (Second Revision) |
TED 11 |
| 1053 |
IS 3141 : 2007 |
Starter motors for internal combustion engines used for automotive and other applications - Specification (Second Revision) |
TED 11 |
| 1054 |
IS 4061 : 1967 |
Specification for headlight switches for automobiles |
TED 11 |
| 1055 |
IS 11086 : 2013 |
Speedometer/odometer systems for automotive application - Specification (First Revision) |
TED 11 |
| 1056 |
IS 12508 : 2013 |
Electric Tachometer for Automotive Vehicles — Specification |
TED 11 |
| 1057 |
IS 13226 : 1991 |
Automotive vehicles - Resistances in starter motorcircuits - Methods of measurement |
TED 11 |
| 1058 |
IS 13437 : 2012 |
Road vehicles - Working voltages for lights fitted to motor vehicles and to their trailers (First Revision) |
TED 11 |
| 1059 |
IS 13460 : 2005 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7 - Pole connector type 12 s (Supplementary) for vehicles with 12 V nominal supply voltage (First Revision) |
TED 11 |
| 1060 |
IS 13461 : 2005 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7 - Pole connector type 12 N (Normal) for vehicles with 12 V nominal supply voltage (First Revision) |
TED 11 |
| 1061 |
IS 13491 : 2005 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7 - Pole connector type 24 N (Normal) for vehicles with 24 V nominal supply voltage (First Revision) |
TED 11 |
| 1062 |
IS 13499 : 2005 |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7 - Pole connector type 24 S (Supplementary) for vehicles with 24 V nominal supply voltage (First Revision) |
TED 11 |
| 1063 |
IS 13599 : 2014 |
Automotive vehicles - Instrument systems - Temperature gauges - Electrical andElectronic type - Specification (First Revision) |
TED 11 |
| 1064 |
IS 13602 : 2013 |
Automotive vehicles - Instrument systems - Temperature gauges mechanical types - Specification (First Revision) |
TED 11 |
| 1065 |
IS 13654 : 1993 |
Automotive vehicles - Instrument systems - Electrical speedometer performance requirements |
TED 11 |
| 1066 |
IS 13931 : Part 1 : 1993 |
Automotive vehicles - Stoplight switches: Part 1 specification |
TED 11 |
| 1067 |
IS 14141 : 1994 |
Automotive vehicles - Electrical windshield washing systems - Performance requiremeNts |
TED 11 |
| 1068 |
IS 14221 : 1995 |
Automotive vehicles retro - Reflective sheets and tapes - Specification |
TED 11 |
| 1069 |
IS 14380 : 1996 |
Automotive vehicles - Ignition coils for magneto ignition systems - Specification |
TED 11 |
| 1070 |
IS 15730 : 2006 |
AC flashers for 2 and 3 wheelers |
TED 11 |
| 1071 |
IS 15796 : 2008 |
Automotive vehicles - Horn installation requirements |
TED 11 |
| 1072 |
IS 15802 : 2008 |
Automotive vehicles - Windscreen wiping system for 4 wheelers other than ml category of vehicles - Requirements |
TED 11 |
| 1073 |
IS 15804 : 2008 |
Automotive vehicles - Windscreen wiping and washing system for ml category of vehicles - Requirements |
TED 11 |
| 1074 |
IS 4086 : 1983 |
Specification for distributors for spark ignition engines (First Revision) |
TED 11 |
| 1075 |
IS 4815 : 1982 |
Specification for self - Cancelling direction indicator switches for automobiles (First Revision) |
TED 11 |
| 1076 |
IS 5439 : 2017 |
Oil pressure switches for automobiles - Specification (Second Revision) |
TED 11 |
| 1077 |
IS 5545 : 1977 |
Specification for fog lights for automobiles (First Revision) |
TED 11 |
| 1078 |
IS 5546 : 1981 |
Specification for distribution caps and rotor arms for automobiles (First Revision) |
TED 11 |
| 1079 |
IS 5562 : 2000 |
Automotive vehicles - Fuel gauges - Cross coil movement type - Specification (Second Revision) |
TED 11 |
| 1080 |
IS 5577 : 2015 |
Automotive vehicles - Ammeters - Specification (Third Revision) |
TED 11 |
| 1081 |
IS 7827 : Part 3 : Sec 1 : 1993 |
Automotive vehicles electrical wiNd screEn wipers: Part 3 wiper arms and blades section 1 wiper arms - Specification |
TED 11 |
| 1082 |
IS 7827 : Part 3 : Sec 2 : 1985 |
Specification for electrical wind screen wiper: Part 3 wiper arms and blades section 2 wiper blades |
TED 11 |
| 1083 |
IS 8339 : 1993 |
Automotive vehicles - Reflex reflectors - Specification (First Revision) |
TED 11 |
| 1084 |
IS 8395 : Part 1 : 1977 |
Specification for cable terminations for automobile wiring: Part 1 blade type connectors (Male And Female) |
TED 11 |
| 1085 |
IS 9264 : Part 1 : 1979 |
Specification for interior lighting of motor vehicle: Part 1 general requirements and recommendations |
TED 11 |
| 1086 |
IS 9500 : 2017 |
360 degree rotary emergency warning lights/special warning lamps - Specification (First Revision) |
TED 11 |
| 1087 |
IS 9521 : 1980 |
Specification for push - Button type switches for automotive vehicles |
TED 11 |
| 1088 |
IS/ISO 6722 : 2011 |
Road vehicles – 60 V and 600 Single – Core Cables – Dimensions, Test Methods and Requirements |
TED 11 |
| 1089 |
IS 10558 : 2013 |
Aluminium shore gangways - Specification (First Revision) |
TED 17 |
| 1090 |
IS/ISO 9678 : 1991 |
Aircraft - Self - Propelled potable - Water vehicle - Functional requirements |
TED 14 |
| 1091 |
IS/ISO 9666 : 1993 |
Aircraft - Self - Propelled lavatory servicing vehicle - Functional requirements |
TED 14 |
| 1092 |
IS 9671 : 1980 |
Specification for frequency weighting for the measurement of aircraft noise (D - Weighting) |
TED 14 |
| 1093 |
IS 9196 : 1979 |
Specification for rotary and linear actuators (AC and DC) for aircraft |
TED 14 |
| 1094 |
IS 9174 : 1979 |
Dimensions for single - Hole mounted lever - Operated switches for aircraft |
TED 14 |
| 1095 |
IS 9156 : 1979 |
Specification for dc generators for aircraft |
TED 14 |
| 1096 |
IS 9086 : 2003 |
Aerospace - Universal head aluminium alloy rivets - Specification (First Revision) |
TED 14 |
| 1097 |
IS 8981 : 1978 |
Specification for extra low voltage and low voltage spring return non - Latch switches for aircraft |
TED 14 |
| 1098 |
IS 8980 : 1978 |
Specification for general purpose push - Pull single - Pole circuit - Breakers for aircraft |
TED 14 |
| 1099 |
IS 8852 : 1978 |
Dimensions for general purpose push - Pull single - Pole circuitbreakers for aircraft |
TED 14 |
| 1100 |
IS 8834 : 1978 |
Dimensions for general purpose push - Pull three - Pole circuit - Breakers for aircraft |
TED 14 |
| 1101 |
IS 8762 : 1978 |
General requirements and testing of certified lower - Deck half - Size containers for high capacity aircraft |
TED 14 |
| 1102 |
IS 8706 : 1978 |
Safety features for alternating current ground power units for aircraft - Servicing |
TED 14 |
| 1103 |
IS 8705 : 1978 |
Specification for static invertors for aircrafts |
TED 14 |
| 1104 |
IS 8589 : 2011 |
Air cargo equipment - Interline pallet nets (Second Revision) |
TED 14 |
| 1105 |
IS 8396 : 1977 |
Specification for air cargo base sandwich panel |
TED 14 |
| 1106 |
IS 6922 : 1973 |
Criteria for safety and design of structures subject to underground blasts |
CED 39 |
| 1107 |
IS B3466 : 1988 |
Specification For Masonry Cement |
CED 2 |
| 1108 |
IS 6491 : 1972 |
Methods of sampling fly ash |
CED 2 |
| 1109 |
IS 1734 : Part 1 : 1983 |
Methods of test for plywood (Parts 1 to 20 in one volume) PART I DETERMINATION OF DENSITY AND--MOISTURE CONTENT |
CED 20 |
| 1110 |
IS 8920 : 1978 |
Methods for sampling of burnt clay tiles |
CED 30 |
| 1111 |
IS 14395 : 1996 |
Monitoring of rock movements using probe inclinometer - Guidelines |
CED 48 |
| 1112 |
IS 1367 : Part 3 : 2017 |
Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision) |
PGD 37 |
| 1113 |
IS/ISO/TR 18532 : 2009 |
Guidance on the application of statistical methods to quality and to industrial standardization |
MSD 3 |
| 1114 |
IS/ISO 603 : Part 4 : 1999 |
Bonded abrasive products - Dimensions: Part 4 grinding wheels for surface grinding / peripheral grinding |
PGD 9 |
| 1115 |
IS 1363 : Part 3 : 2018 |
Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 3 (Style 1) Hexagon Nuts ( Size Range M 5 to M 64 ) ( Fifth Revision ) |
PGD 37 |
| 1116 |
IS 286 : 2018 |
Methods of sampling and test for soaps (Third Revision) |
CHD 25 |
| 1117 |
IS 1410 : 2019 |
Textiles – Coir ropes – Specification (fourth revision) |
TXD 9 |
| 1118 |
IS 1364 : Part 3 : 2018 |
Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 3 Hexagon Nuts, Style 1 ( Size Range M 1.6 To M 64 ) |
PGD 37 |
| 1119 |
IS 1364 : Part 4 : 2003 |
Hexagon head bolts, screws and nuts of product grades A and B: Part 4 hexagon thin nuts (Chamfered) (Size Range M1.6t0 M64) (Fourth Revision) |
PGD 37 |
| 1120 |
IS 1364 : Part 6 : 2018 |
Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 6 Hexagon Nuts, Style 2 ( First Revision ) |
PGD 37 |
| 1121 |
IS 1367 : Part 13 : 2020 |
Technical Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized Coatings on Threaded Fasteners ( Third Revision ) |
PGD 37 |
| 1122 |
IS 11003 : Part 2 : 2020 |
Hydraulic Fluid Power — Mounting Dimensions for Single Rod Cylinders, 16 MPa ( 160 bar ) Series Part 2 Compact Series ( Second Revision ) |
PGD 36 |
| 1123 |
IS 10481 : 2020 |
Hydraulic Fluid Power — General Rules and Safety Requirements for Systems and their Components ( Second Revision ) |
PGD 36 |
| 1124 |
IS 14876 : 2020 |
Pneumatic Fluid Power ? Compressed-air lubricators Part 1 Main Characteristics to be Included in Supplier’s Literature and Product-marking Requirements ( First Revision ) |
PGD 36 |
| 1125 |
IS/ISO 10683 : 2018 |
Fasteners - Non-Electrolytically Applied Zinc Flake Coating Systems |
PGD 37 |
| 1126 |
IS 16595 : Part 5 : 2018 |
Ergonomic Requirements for Office Work With Visual Display Terminals (VDTs) Part 5 Workstation Layout and Postural Requirements |
PGD 15 |
| 1127 |
IS 16756 : 2018 |
Conveyor Belts - Characteristics of Covers - Classification |
PGD 40 |
| 1128 |
IS 16560 : 2017 |
Ergonomics of the Thermal Environment — Instruments for Measuring Physical Quantities |
PGD 15 |
| 1129 |
IS 10983 : 1994 |
Fluid power - Cylinders - Housing for piston and rod seals in reciprocating applications - Dimensions and tolerances - Recommendations (First Revision) |
PGD 36 |
| 1130 |
IS 14423 : 1997 |
Luid power systems and components - Connectors and associated components - Nominal pressures |
PGD 36 |
| 1131 |
IS 7008 : Part 2 : 1988 |
ISO metric trapezoidal screw threads: Part 2 pitch diameter combinations (First Revision) |
PGD 37 |
| 1132 |
IS 7008 : Part 4 : 1999 |
ISO metric trapezoidal screw threads: Part 4 tolerances (Second Revision) |
PGD 37 |
| 1133 |
IS 8536 : 1987 |
Fasteners— Bolts, screws, studs and nuts — Symbols and Descriptions of dimensions (Second Revision) |
PGD 37 |
| 1134 |
IS 15274 : 2003 |
Tolerances for fasteners - Plain washers for bolts, screws and nuts - Product grades a and c |
PGD 37 |
| 1135 |
IS/ISO 13942 : 2000 |
Bonded abrasive products - Limit deviations and run - Out tolerances |
PGD 9 |
| 1136 |
IS 7008 : Part 1 : 1999 |
ISO metric trapezoidal screw threads: Part 1 basic profile and maximum material profile (Second Revision) |
PGD 37 |
| 1137 |
IS 13998 : 1994 |
Multi - Point diamond impregnated dressing tools - Specification |
PGD 9 |
| 1138 |
IS 4225 : 2021 |
Steel — Ultrasonic Testing of Steel Flat Products of Thickness Equal to or Greater than 6 mm (Third Revision) |
MTD 21 |
| 1139 |
IS 730 : 1978 |
Hook Bolts for Corrugated Sheet Roofing |
PGD 37 |
| 1140 |
IS 1369 : Part 3 : 1995 |
Fasteners - Thread run - Outs and undercuts : Part 3 dimensions for screw thread run - Outs and undercuts for internal threads (Blind Tapped Holes) (third revision) |
PGD 37 |
| 1141 |
IS 5624 : 1993 |
Foundation bolts - Specification (First Revision) |
PGD 37 |
| 1142 |
IS 1262 : 1979 |
Specification for abrasive specialities (Bonded) (First Revision) |
PGD 9 |
| 1143 |
IS 17603 : 2021 |
Carbon fibre -- Determination of volume resistivity |
TXD 40 |
| 1144 |
IS 2 : 1960 |
Rules for Rounding off Numerical Values |
MSD 3 |
| 1145 |
IS 14268 : 2017 |
Uncoated stress relieved low relaxation seven - Wire (Ply) strand for prestressed concrete - Specification (First Revision) |
CED 54 |
| 1146 |
IS 11042 : Part 1 : 1984 |
Specification for binding screws for alpine skis: Part 1 general requirements |
PGD 27 |
| 1147 |
IS 6590 : 1972 |
Specification for braided nylon rope for mountaineering purposes |
PGD 27 |
| 1148 |
IS 15843 : Part 2 : 2012 |
Snowboards - Binding mounting area: Part 2 requirements and test methods for snowboards with inserts |
PGD 27 |
| 1149 |
IS 5502 : 1988 |
General requirements for smooth - Wheeled diesel road roller (Second Revision) |
MED 7 |
