| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 2339 : 2013 |
Aluminium paints for general purposes - Specification (First Revision) |
CHD 20 |
| 2 |
IS 7742 : 2013 |
Synthetic emulsion resin binders - Specification (First Revision) |
CHD 17 |
| 3 |
IS 1419 : 1989 |
Antifouling paint, brushing, for ships bottom and hulls - Specification (Second Revision) |
CHD 20 |
| 4 |
IS 1874 : 2018 |
Ready mixed paint, universal, zinc chrome, priming (Synthetic) for light alloys - Specification (Second Revision) |
CHD 20 |
| 5 |
IS 2075 : 2017 |
Ready mixed paint, stoving, red oxide zinc chrome, priming - Specification (Third Revision) |
CHD 20 |
| 6 |
IS 2074 : 1992 |
Ready Mixed Paint, Air Drying, Red Oxide Zinc Chrome, Priming |
CHD 20 |
| 7 |
IS 101 : Part 1 : Sec 2 : 1987 |
Methods of sampling and test for paints, varnishes and related products Part 1 Test on liquid paints (general and physical) Sec 2 Preliminary examination and preparation of samples for testing |
CHD 20 |
| 8 |
IS 13239 : 2016 |
Epoxy surfacer (Two Pack) - Specification (First Revision) |
CHD 20 |
| 9 |
IS 13799 : 2016 |
Polyurethane Base Surfacer (Two Pack) for Exterior Painting of Railway Coaches - Specification |
CHD 20 |
| 10 |
IS 13759 : 2017 |
Polyurethane primer, zinc phosphate (Two - Pack) for exterior painting of railway coaches - Specification (First Revision) |
CHD 20 |
| 11 |
IS 14209 : 2016 |
Epoxy enamel, two component, glossy - Specification (First Revision) |
CHD 20 |
| 12 |
IS 6714 : 1989 |
Ready mixed paint, finishing, non - slip, deck - Specification (First Revision) |
CHD 20 |
| 13 |
IS 13183 : 1991 |
Aluminium paint, heat resistant - Specification |
CHD 20 |
| 14 |
IS 13184 : 1991 |
Mastic filler, epoxy based - Specification |
CHD 20 |
| 15 |
IS 13213 : 2018 |
Polyurethane full gloss enamel (Two Pack) - Specification (First Revision) |
CHD 20 |
| 16 |
IS 13607 : 1992 |
Heady mixed paint, finishing, general purposes, synthetic - Specification |
CHD 20 |
| 17 |
IS 13798 : 1993 |
Polyurethane base knifing filler (Two Pack) for exterior painting of railway coaches - Specification |
CHD 20 |
| 18 |
IS 14314 : 1995 |
Thinner, general purpose, for synthetic paints and varnishes - Specification |
CHD 20 |
| 19 |
IS 14506 : 1998 |
Epoxy redoxide zinc phosphate weldable primer,two component - Specification |
CHD 20 |
| 20 |
IS 14589 : 1999 |
Zinc priming paint, epoxy based, two - Pack - Specification |
CHD 20 |
| 21 |
IS 14946 : 2001 |
Zinc ethyl silicate primer, two components - Specification |
CHD 20 |
| 22 |
IS 14947 : 2001 |
Enamel synthetic, oil resistant, air drying - Specification |
CHD 20 |
| 23 |
IS 14948 : 2001 |
Paint coal tar epoxy, two pack, black and brown (Base and Hardner) - Specification |
CHD 20 |
| 24 |
IS 101 : Part 1 : Sec 6 : 1987 |
Methods of sampling and test for paints, varnishes and related products: Part 1 tests on liquid paints (general and physical): Sec 6 flash point (Third Revision) |
CHD 20 |
| 25 |
IS 101 : Part 2 : Sec 2 : 1986 |
Methods of sampling and test for paints, varnishes and related products: Part 2 test on liquid paints (chemical examination): Sec 2 volatile matter (Third Revision) |
CHD 20 |
| 26 |
IS 101 : Part 3 : Sec 1 : 1986 |
Methods of sampling and test for paints, varnishes and related products: Part 3 tests on paint film formation: Sec 1 drying time (Third Revision) |
CHD 20 |
| 27 |
IS 101 : Part 7 : Sec 1 : 1989 |
Methodsof sampling and test for paints, varnishes and related produdTs: Part 7 environmental tests on paint films: Sec 1 resistance to water (Third Revision) |
CHD 20 |
| 28 |
IS 101 : Part 7 : Sec 2 : 1990 |
Methods of sampling and test for paints,varnishes and related products: Part 7 environmental tests on paint films: Sec 2 resistance to liquids (Third Revision) |
CHD 20 |
| 29 |
IS 101 : Part 7 : Sec 4 : 1990 |
Methods of sampling and test for paints, varnishes and related products: Part 7 environmental tests on paint films: Sec 4 resistance to bleeding of pigments (Third Revision) |
CHD 20 |
| 30 |
IS 101 : Part 8 : Sec 2 : 1990 |
Methods of sampling and test for paints, varnishes and related products: Part 8 tests for pigments and other solids: Sec 2 pigments and non - volatile matter (Third Revision) |
CHD 20 |
| 31 |
IS 138 : 2018 |
Ready mixed paint, marking, for packages and petrol containers - Specification (Fourth Revision) |
CHD 20 |
| 32 |
IS 151 : 2017 |
Ready mixed paint, spraying, finishing, stoving, enamel for general purposes, colour as required - Specification (Second Revision) |
CHD 20 |
| 33 |
IS 12744 : 1989 |
Ready Mixed Paint, Air Drying, Red Oxide - Zinc Phosphate, Priming |
CHD 20 |
| 34 |
IS 12744 : 2013 |
Ready mixed paint, air drying, red oxide - zinc phosphate, priming - Specification : Part 1 for domestic and decoratvie applications (First Revision) |
CHD 20 |
| 35 |
IS 133 : 2004 |
Enamel, Interior : (a) Undercoating (b) Finishing |
CHD 20 |
| 36 |
IS 5410 : 2013 |
Cement paint - Specification (Second Revision) |
CHD 20 |
| 37 |
IS 428 : 2013 |
Washable distemper - Specification (Third Revision) |
CHD 20 |
| 38 |
IS 427 : 2013 |
Distemper, dry, colour as required - Specification (Third Revision) |
CHD 20 |
| 39 |
IS 3536 : 2016 |
Ready mixed paint, brushing, wood primer - Specification (Second Revision) |
CHD 20 |
| 40 |
IS 2933 : Part 1 : 2013 |
Enamel, exterior: (A) undercoating (B) finishing - Specification: Part 1 for domestic and decorative applications (Second Revision) |
CHD 20 |
| 41 |
IS 2932 : 2003 |
Enamel, Synthetic, Exterior : (a) Undercoating (b) Finishing |
CHD 20 |
| 42 |
IS 2932 : 2013 |
Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification : Part 1 For domestic and decorative applcations (Fourth Revision) |
CHD 20 |
| 43 |
IS 8983 : 2018 |
Ready mixed paint, finishing, stoving for war equipment - Specification (First Revision) |
CHD 20 |
| 44 |
IS 17044 : 2018 |
Intumescent fire retardant paint (Water Based) - Specification |
CHD 20 |
| 45 |
IS 17072 : 2019 |
Non plastic, biodegradable polymer based paper coating chemical |
CHD 20 |
| 46 |
IS 8982 : 2019 |
Ready mixed paint, finishing, air-drying for war equipment - Specification (Second Revision) |
CHD 20 |
| 47 |
IS 101 : Part 5 : Sec 3 : 2019 |
Methods of sampling and test for paints, varnishes and related products: Part 5 mechanical tests: Sec 3 impact resistance - falling - weight test, large - Area indenter (Fifth Revision) |
CHD 20 |
| 48 |
IS 101 : Part 5 : Sec 5 : 2019 |
Methods of sampling and test for paints, varnishes and related products: Part 5 Mechanical tests: Sec 5 Impact resistance - Falling - weight test, small - area indenter |
CHD 20 |
| 49 |
IS 17218 : 2019 |
Solar Thermo-Reflective Exterior Coating for Cooling of Roof Top |
CHD 20 |
| 50 |
IS 17294 : 2019 |
Dyestuffs - Determination of solubility in organic solvents gravimetric and photometric methods |
CHD 21 |
| 51 |
IS 101 : Part 1 : Sec 7 : 2020 |
Methods of sampling and test for paints, varnishes and related products : Part 1 test on liquid paints (general and physical) : Sec 7 mass per 10 litres - determination of density - pycnometer method (Fourth Revision) |
CHD 20 |
| 52 |
IS 101 : Part 7 : Sec 3 : 2020 |
Methods of sampling and test for paints, varnishes and related products: Part 7 environmental tests on paint films: Sec 3 determination of the effect of heat ( Fourth Revision ) |
CHD 20 |
| 53 |
IS 16943 : 2019 |
Two components high build epoxy micaceous iron oxide (MIO) pigmented intermediate coat - Specification |
CHD 20 |
| 54 |
IS 16944 : 2018 |
Two components high build epoxy titanium dioxide (TiO2) pigmented intermediate coat - Specification |
CHD 20 |
| 55 |
IS 139 : 2018 |
Ready mixed paint, marking, quick drying, for marking with rubber stamps - Specification (Third Revision) |
CHD 20 |
| 56 |
IS 6236 : 1971 |
Direct recording electrical measuring instruments |
ETD 12 |
| 57 |
IS 16942 : 2018 |
Silicone soya alkyd exterior paint - Specification |
CHD 20 |
| 58 |
IS/ISO 23828 : 2013 |
FUEL CELL ROAD VEHICLES - ENERGY CONSUMPTION MEASUREMENT - VEHICLES FUELLED WITH COMPRESSED HYDROGEN |
TED 26 |
| 59 |
IS 13238 : 1991 |
Epoxy based zinc phosphate primer (Two Pack) - Specification |
CHD 20 |
| 60 |
IS 13871 : 1993 |
Powder coatings - Specification |
CHD 20 |
| 61 |
IS 16143 : Part 7 : 2021 |
Hard coal and coke - Mechanical sampling : Part 7 methods for determining the precision of sampling, sample preparation and testing (First Revision) |
PCD 7 |
| 62 |
IS 101 : Part 1 : Sec 8 : 2015 |
Methods of sampling and test for paints, varnishes and related products: Part 1 Test on liquid paints (general and physical): Sec 8 Pigments and extenders - determination of pH value of an aqueous suspension (First Revision) |
CHD 20 |
| 63 |
IS 101 : Part 3 : Sec 5 : 2019 |
Methods of sampling and test for paints, varnishes and related products: Part 3 tests on paint film formation: Sec 5 determination of fineness of grind (Fourth Revision) |
CHD 20 |
| 64 |
IS 101 : Part 2 : Sec 4 : 2016 |
Methods of sampling and test for paints, varnishes and related products: Part 2 Test on liquid paints (chemical examination): Sec 4 Determination of volatile organic compound (Voc) content - Gas - Chromatographic method (First Revision) |
CHD 20 |
| 65 |
IS 16719 : 2018 |
Polyurethane coatings for the interior and exterior of steel pipe and fittings - Specification |
CHD 20 |
| 66 |
IS 164 : 2015 |
Ready mixed paint for road marking - Specification (Second Revision) |
CHD 20 |
| 67 |
IS 2074 : 2015 |
Ready mixed paint, air drying, red oxide - Zinc chrome, priming - Specification (Third Revision) |
CHD 20 |
| 68 |
IS 344 : 1976 |
Specification for varnish, stoving (First Revision) |
CHD 20 |
| 69 |
IS 1234 : 1980 |
Specification for ink, stencil, oil base, for marking porous surfaces (First Revision) |
CHD 14 |
| 70 |
IS 347 : 1975 |
Specification for varnish, shellac, for general purposes (First Revision) |
CHD 20 |
| 71 |
IS 5083 : 1988 |
Specification for knifing stopper (Second Revision) |
CHD 20 |
| 72 |
IS 133 : Part 1 : 2013 |
Enamel, interior: (A) undercoating (B) finishing - Specification: Part 1 for household and decorative purposes (Fifth Revision) |
CHD 20 |
| 73 |
IS 6127 : 1971 |
Specification for varnish, spar and fungicidal |
CHD 20 |
| 74 |
IS 419 : 1967 |
Specification for putty, for use on window frames (First Revision) |
CHD 20 |
| 75 |
IS 101 : Part 1 : Sec 5 : 1989 |
Methods of sampling and test for paints, varnishes and related products: Part 1 tests on liquid paints (general and physical): Sec 5 consistency (Third Revision) |
CHD 20 |
| 76 |
IS 8662 : 2004 |
Enamel, synthetic exterior: (A) undercoating (B) finishing, for railway coaches - Specification (Second Revision) |
CHD 20 |
| 77 |
IS 17952 : Part 1 : 2022 |
Inflatable boats - Part 1: Boats with a maximum motor power rating of 4.5 kW |
TED 18 |
| 78 |
IS 5691 : 1970 |
Specification for lacquer, cellulose nitrate, pigmented, finishing, glossy |
CHD 20 |
