| SNo |
IS Number |
Title |
Technical Committee |
|
1 |
SP 30 : 2011 |
National electrical code 2011 (First Revision) |
ETD 20 |
|
2 |
IS 210 : 2009 |
Grey iron castings - Specification (Fifth Revision) |
MTD 6 |
|
3 |
IS 399 : 1963 |
Classification of Commercial Timbers and their Zonal Distribution (Revised) |
CED 9 |
|
4 |
IS 456 : 2000 |
Plain and reinforced concrete - Code of practice (Fourth Revision) |
CED 2 |
|
5 |
IS 732 : 2019 |
Code of practice for electrical wiring installations (Fourth Revision) |
ETD 20 |
|
6 |
IS 734 : 1975 |
Specification for wrought aluminium and aluminium alloy forging stock and forgings (For General Engineering Purposes) (Second Revision) |
MTD 7 |
|
7 |
IS 755 : 1984 |
Specification for handloom cotton MALMAL (first revision) |
TXD 8 |
|
8 |
IS 800 : 2007 |
General construction in steel - Code of practice (Third Revision) |
CED 7 |
|
9 |
IS 802 : Part 1 : Sec 1 : 2015 |
Use of structural steel in overhead transmission line towers - Code of practice: Part 1 materials, loads and design strengths: sec 1 materials and loads (Fourth Revision) |
CED 7 |
|
10 |
IS 802 : Part 1 : Sec 2 : 2016 |
Use of Structural Steel in Overhead Transmission Line Towers - Code of Practice: Part 1 Material, Loads and Design Strengths: Sec 2 Design Strengths (Fourth Revision) |
CED 7 |
|
11 |
IS 875 : Part 3 : 2015 |
Design Loads (Other than Earthquake) for Buildings and Structures - Code of Practice Part 3 Wind Loads ( Third Revision ) |
CED 37 |
|
12 |
IS 883 : 2016 |
Design of Structural Timber in Buildings - Code of Practice (Fifth Revision) |
CED 13 |
|
13 |
IS 947 : 1985 |
Specification for washers for water fittings for fire fighting purposes (Second Reuision) |
CED 22 |
|
14 |
IS 1030 : 1998 |
Carbon steel castings for general engineering purposes - Specification (Fifth Revision) |
MTD 14 |
|
15 |
IS 1285 : 2002 |
Wrought aluminium and aluminium alloys - Extruded round tube and hollow sections for general engineering purposes - Specification (Third Revision) |
MTD 7 |
|
16 |
IS 1293 : 2005 |
Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision) |
ETD 14 |
|
17 |
IS 1364 : Part 1 : 2018 |
Hexagon head bolts, screws and nuts of product grades A and B: Part 1 hexagon head bolts (Size Range M 1.6 To M 64) (Fifth Revision) |
PGD 37 |
|
18 |
IS 1364 : Part 2 : 2018 |
Hexagon head bolts, screws and nuts of product grades A and B: Part 2 hexagon head screws (Size Range M 1.6 To M 64) (Fifth Revision) |
PGD 37 |
|
19 |
IS 1364 : Part 3 : 2018 |
Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 3 Hexagon Nuts, Style 1 ( Size Range M 1.6 To M 64 ) |
PGD 37 |
|
20 |
IS 1364 : Part 4 : 2003 |
Hexagon head bolts, screws and nuts of product grades A and B: Part 4 hexagon thin nuts (Chamfered) (Size Range M1.6t0 M64) (Fourth Revision) |
PGD 37 |
|
21 |
IS 1364 : Part 5 : 2002 |
Hexagon head bolts, screws and nuts of product grades A and B: Part 5 hexagon thin nuts - Product grade B (Unchamfered) (Size Range M 1.6t0 M 10) (Fourth Revision) |
PGD 37 |
|
22 |
IS 1364 : Part 6 : 2018 |
Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 6 Hexagon Nuts, Style 2 ( First Revision ) |
PGD 37 |
|
23 |
IS 1368 : 2018 |
Dimensions for ends of parts with external ISO metric threads (Fourth Revision) |
PGD 37 |
|
24 |
IS 1641 : 2013 |
Fire safety of buildings (General): general principles of fire grading and classification - Code of practice (Second Revision) |
CED 36 |
|
25 |
IS 1642 : 2013 |
Fire safety of buildings (General): details of construction - Code of practice (Second Revision) |
CED 36 |
|
26 |
IS 1643 : 2013 |
Fire Safety of Buildings (General): Exposure Hazard — Code of Practice (Second Revision) |
CED 36 |
|
27 |
IS 1644 : 2013 |
Fire safety of buildings (General): exit requirements and personal hazard - Code of practice (Second Revision) |
CED 36 |
|
28 |
IS 1646 : 2015 |
Fire safety of buildings (General): electrical installations - Code of practice (Third Revision) |
CED 36 |
|
29 |
IS/ISO 1834 : 1999 |
Short link chain for lifting purposes - General conditions of acceptance |
MED 14 |
|
30 |
IS 1891 : Part 1 : 2021 |
CONVEYOR AND ELEVATOR TEXTILE BELTING – SPECIFICATION PART 1 GENERAL PURPOSE BELTING (Fifth Revision) |
PGD 40 |
|
31 |
IS 1891 : Part 2 : 1993 |
Conveyor and elevator textile belting - Specificaton: Part 2 heat resistant belting (Third Revision) |
PGD 40 |
|
32 |
IS 1891 : Part 3 : 1988 |
Specification for rubber conveyor and elevator textile belting: Part 3 oil resistant belting (Second Revision) |
PGD 40 |
|
33 |
IS 1891 : Part 4 : 1978 |
Specification for rubber conveyor and elevator belting: Part 4 hygienic belting (First Revision) |
PGD 40 |
|
34 |
IS 1891 : Part 5 : 1993 |
Conveyor and elevator textile belting - Specification: Part 5 fire resistant belting for surface application |
PGD 40 |
|
35 |
IS 1893 : Part 4 : 2015 |
Criteria for Earthquake Resistant Design of Structures Part 4 Industrial Structures Including Stack - Like Structures ( First Revision ) |
CED 39 |
|
36 |
IS 2004 : 1991 |
Carbon steel forgings for general engineering purposes - Specification (Third Revision) |
MTD 16 |
|
37 |
IS 2026 : Part 1 : 2011 |
Power transformers: Part 1 general (Second Revision) |
ETD 16 |
|
38 |
IS 2062 : 2011 |
Hot rolled medium and high tensile structural steel - Specification (Seventh Revision) |
MTD 4 |
|
39 |
IS 2266 : 2019 |
Steel wire ropes for general engineering purpose - Specification (Fifth Revision) |
MED 10 |
|
40 |
IS 2361 : 2002 |
Bulldog grips - Specification (Third Revision) |
MED 10 |
|
41 |
IS/ISO 2415 : 2004 |
Forged shackles for general lifting purposes - Dee shackles and bow shackles |
MED 14 |
|
42 |
IS 2429 : Part 1 : 1987 |
Specification for round steel short link chains (Electric Butt Welded), grade L(3): Part 1 Non - Calibrated load chain for lifting purposes (Third Revision) |
MED 14 |
|
43 |
IS 2485 : 2022 |
SPECIFICATION FOR DROP FORGED SOCKETS FOR WIRE ROPES FOR GENERAL ENGINEERING PURPOSES Second Revision |
MED 10 |
|
44 |
IS 2535 : Part 1 : 2004 |
Cylindrical gears for general and heavy engineering: Part 1 standard basic rack tooth profile (Third Revision) |
PGD 33 |
|
45 |
IS 2535 : Part 2 : 2004 |
Cylindrical gears for general and heavy engineering: Part 2 module (Third Revision) |
PGD 33 |
|
46 |
IS 2644 : 1994 |
High strength steel castings for general engineering and structural purposes - Specification (Fourth Revision) |
MTD 14 |
|
47 |
IS 2760 : 1980 |
Specification for steel chain slings (First Revision) |
MED 14 |
|
48 |
IS 2762 : 2009 |
Wire rope slings and sling legs - Specification (Second Revision) |
MED 10 |
|
49 |
IS 2828 : 2019 |
Plastics - Vocabulary (Second Revision) |
PCD 12 |
|
50 |
IS 3043 : 2018 |
Code of practice for earthing (Second Revision) |
ETD 20 |
|
51 |
IS/ISO 3076 : 2012 |
Round steel short link chains for general lifting purposes - Medium tolerance sling chains for chain slings - Grade 8 (First Revision) |
MED 14 |
|
52 |
IS/ISO 3077 : 2001 |
SHORT LINK CHAIN FOR LIFTING PURPOSES GRADE T (TYPES T, OAT AND DT), FINE-TOLERANCE HOIST CHAIN |
MED 14 |
|
53 |
IS 3109 : Part 1 : 1982 |
Specification for short link chain, grade M (4): Part 1 non - Calibrated load chain for lifting purposes (Second Revision) |
MED 14 |
|
54 |
IS 3629 : 1986 |
Structural Timber In Building - Specification |
CED 13 |
|
55 |
IS 3734 : 1983 |
Dimensions for worm gearing (First Revision) |
PGD 33 |
|
56 |
IS 3757 : 1985 |
Specification for high strength structural bolts (Second Revision) |
PGD 37 |
|
57 |
IS 3809 : 1979 |
Fire resistance test for structures (First Revision) |
CED 36 |
|
58 |
IS 3854 : 1997 |
Switches for domestic and similar purposes - Specification (Second Revision) |
ETD 14 |
|
59 |
IS 3871 : 2013 |
Fibre ropes and cordage – Vocabulary (third revision) |
TXD 9 |
|
60 |
IS 4889 : 1968 |
Methods of determination of efficiency of rotating electrical machines |
ETD 15 |
|
61 |
IS 4912 : 1978 |
Safety requirements floor and wall openings, and toe boards (First Revision) |
CED 45 |
|
62 |
IS 5037 : Part 1 : 2004 |
Straight bevel gears for general engineering and heavy engineering: Part 1 basic rack (First Revision) |
PGD 33 |
|
63 |
IS 5037 : Part 2 : 2004 |
Straight bevel gears for general engineering and heavy engineering: Part 2 module and diametral pitches (First Revision) |
PGD 33 |
|
64 |
IS 5175 : 2014 |
Fibre ropes – Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high- tenacity multifilament (PP3) – 3-, 4-, 8- and 12-strand ropes (third revision) |
TXD 9 |
|
65 |
IS 5384 : 1985 |
Specification for Aluminium I-Beam (First Revision) |
CED 7 |
|
66 |
IS 7651 : 2021 |
WIRE REINFORCED RUBBER COVERED HYDRAULIC HOSE SPECIFICATION Third Revision of IS 7651 |
PCD 13 |
|
67 |
IS 8147 : 1976 |
Code of practice for use of aluminium alloys in structures |
CED 7 |
|
68 |
IS 8526 : 1994 |
Sizes for bores and port threads for pneumatic fluid power cylinders - Recommendations (First Revision) |
PGD 36 |
|
69 |
IS 9282 : 2021 |
Wire Ropes and Strands for Suspension Bridges |
MED 10 |
|
70 |
IS 9833 : 2018 |
List of colourants for use in plastics in contact with foodstuffs and pharmaceuticals (Second Revision) |
PCD 12 |
|
71 |
IS 9936 : 1992 |
Manila, nylon, polyester and polypropylene ropes for marine purpose – Guide on equivalence (first revision) |
TXD 9 |
|
72 |
IS 10000 : Part 1 : 1980 |
Methods of tests for internal combustion engines: Part 1 glossary of terms relating to test methods |
TED 2 |
|
73 |
IS 10000 : Part 2 : 1980 |
Methods of tests for internal combustion engines Part 2 standar d reference conditions |
TED 2 |
|
74 |
IS 10000 : Part 3 : 1980 |
Methods of tests for internal combustion engines: Part 3 measurements for testing - Units and limits of accuracy |
TED 2 |
|
75 |
IS 10000 : Part 4 : 1980 |
Methods of tests for internal combustion engines: Part 4 declaration of power, efficiency, fuel consumption and lubricating oil consumption |
TED 2 |
|
76 |
IS 10000 : Part 5 : 1980 |
Methods of tests for internal combustion engines: Part 5 preparation for tests and measurements for wear |
TED 2 |
|
77 |
IS 10000 : Part 6 : 1980 |
Methods of tests for internal combustion engines: Part 6 recording of test results |
TED 2 |
|
78 |
IS 10000 : Part 7 : 1980 |
Methods of tests for internal combustion, engines: Part 7 governing tests for constant speed engines and selection of engines for use with electrical generators |
TED 2 |
|
79 |
IS 10000 : Part 8 : 1980 |
Methods of tests for internal combustion engines Part 8 performance tests |
TED 2 |
|
80 |
IS 10000 : Part 9 : 1980 |
Methods of tests for internal combustion engines: Part 9 endurance tests |
TED 2 |
|
81 |
IS 10000 : Part 10 : 1980 |
Methods of tests for internal combustion engines: Part 10 tests for smoke levels, limits and corrections for smoke levels for variable ,speed compression ignition engines |
TED 2 |
|
82 |
IS 10000 : Part 11 : 1980 |
Methqds of tests for internal combustion engines: Part 11 information to be supplied by the purchaser to the manufacturer and information to be supplied by the manufacturer along with the engine |
TED 2 |
|
83 |
IS 10000 : Part 12 : 1980 |
Methods of tests for internal combustion engines: Part 12 specimen test certificates |
TED 2 |
|
84 |
IS 10000 : Part 13 : 2002 |
Methods of tests for internal combustion engines: Part 13 recommendations on nature of tests required for functional changes in critical components |
TED 2 |
|
85 |
IS 10143 : 1995 |
Pneumatic fluid power - Single rod cylinders, 1000 kPa (10 Bmar) series, with detachable mountings, bores from 32 mm to 320 mm - Mounting dimensions (First Revision) |
PGD 36 |
|
86 |
IS 11277 : 2004 |
Hydraulic fluid power - Gas - Loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities (First Revision) |
PGD 36 |
|
87 |
IS 11066 : 2014 |
Fibre ropes ¬– Polyester 3-, 4-, 8- and 12- strand ropes (second revision) |
TXD 9 |
|
88 |
IS 12723 : 2020 |
Pneumatic Fluid Power - Single Rod Cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm - Basic and Mounting Dimensions ( First Revision ) |
PGD 36 |
|
89 |
IS 12725 : 2021 |
Pneumatic Fluid Power - General Rules and Safety Requirements for Systems and their Components ( Second Revision ) |
PGD 36 |
|
90 |
IS 12738 : 1995 |
Pneumatic fluid power 7 single rod cylinders, 1 000 kPa (Ib 10 bar) Series, With Integral Mountings, Bores From 32 Mm To 250 Mm - Mounting Dimensions (First Revision) |
PGD 36 |
|
91 |
IS 13086 : 2021 |
Pneumatic Fluid Power - Cylinders, 1 000 kPa ( 10 bar ) Series - Mounting Dimensions of Rod-end Spherical Eyes ( Second Revision ) |
PGD 36 |
|
92 |
IS 13087 : 2021 |
Pneumatic Fluid Power - Cylinders, 1 000 kpa ( 10 bar ) Series - Mounting Dimensions of Rod-end Clevises ( Second Revision ) |
PGD 36 |
|
93 |
IS 13980 : 1995 |
Acceptance tests on industrial boilers - Code of practice |
MED 1 |
|
94 |
IS 14534 : 2016 |
Plastics - Guidelines for the recovery and recycling of plastics waste (First Revision) |
PCD 12 |
|
95 |
IS 15475 : Part 1 : 2004 |
Code of recommended practice for amusement rides safety: Part 1 general information |
MED 6 |
|
96 |
IS/IEC 61558 : PART 1 : 1997 |
Safety of power transformers, power supply units and similar: Part 1 general requirements and tests |
ETD 16 |
|
97 |
IS 62305 : Part 1 : 2010 |
Protection against lightning: Part 1 general principles |
ETD 20 |
|
98 |
IS/IEC 62305 : Part 2 : 2010 |
Protection against lightning: Part 2 risk management |
ETD 20 |
|
99 |
IS/IEC 62305 : Part 3 : 2010 |
Protection against lightning: Part 3 physical damage to structures and life hazard |
ETD 20 |
|
100 |
IS/IEC 62305 : Part 4 : 2010 |
Protection against lightning: Part 4 electrical and electronic systems within stuctures |
ETD 20 |
