| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 804 : 1967 |
Specification for Rectangular Pressed Steel Tanks (First Revision) |
CED 7 |
| 2 |
IS 13039 : 2014 |
External hydrant systems - provision and maintenance - Code of practice (First Revision) |
CED 22 |
| 3 |
IS 5329 : 1983 |
Code of practice for sanitary pipe work above ground for buildings |
CED 24 |
| 4 |
IS 6295 : 1986 |
Code of practice for water supply and drainage in high altitudes and/or sub - Zero temperature regions (First Revision) |
CED 24 |
| 5 |
IS 8419 : Part 2 : 1984 |
Requirements for rapid sand gravity filtration equipment: Part 2 underdrainage system |
CED 24 |
| 6 |
IS 3844 : 1989 |
Code of practice for installation and maintenance of internal fire hydrants and hose reels on premises (First Revision) |
CED 22 |
| 7 |
IS 12251 : 1987 |
Code of practice for drainage of building basements |
CED 24 |
| 8 |
IS 1742 : 1983 |
Code of practice for building drainage (second revision) |
CED 24 |
| 9 |
IS 2065 : 1983 |
Code of practice for water supply in buildings (Second Revision) |
CED 24 |
| 10 |
IS 3114 : 1994 |
Code of Practice for Laying of Cast Iron Pipes (Second Revision) |
CED 24 |
| 11 |
IS 4111 : Part 4 : 1968 |
Code of practice for ancillary structures in sewerage system: Part 4 puming stations and pumping mains (Rising Mains) |
CED 24 |
| 12 |
IS 8413 : Part 1 : 1977 |
Requirements for biological treatment equipment: Part 1 Trickling filters |
CED 24 |
| 13 |
SP 62 : 1997 |
Handbook on causes and prevention of cracks in buildings |
CED 13 |
| 14 |
SP 35 (S&T) : 1987 |
Handbook on Water Supply and Drainage (with Special Emphasis on Plumbing) |
CED 24 |
| 15 |
SP 7 : 2016 |
National building code of India: Part 0 integrated approach - Prerequisite for applying provisions of the code |
CED 46 |
| 16 |
IS 13593 : 1992 |
UPVC Pipe Fittings for Use with the UPVC Pipes in the Suction and Delivery Lines of Agricultural Pumps -Specification |
CED 50 |
| 17 |
SP 57 (QAWSM) : 1993 |
Handbook on pipes and fittings for drinking water supply |
CED 50 |
| 18 |
IS 10299 : 1982 |
Specification for cast iron saddle pieces for service connection from asbestos cement pressure pipes |
MTD 6 |
| 19 |
IS 12820 : 2004 |
Dimensional requirements of rubber gaskets for mechanical joints and push - On joints for use with cast iron pipes and fittings for carrying water, gas and sewage (First Revision) |
MTD 6 |
| 20 |
IS 13382 : 2018 |
Cast iron specials for mechanical and push-on flexible joints for pressure pipes for water, gas and sewage - Specification (Second Revision) |
MTD 6 |
| 21 |
IS 8350 : 1977 |
Deviations for untoleranced dimensions of spheroidal or nodular graphite iron castings |
MTD 6 |
| 22 |
IS 7925 : 1976 |
Specification for low alloy types of abrasion - Resistant iron castings |
MTD 6 |
| 23 |
IS 3005 : Part 1 : 1979 |
Specification for grey cast iron ingot moulds, stools and slag ladles: Part 1 bottom stools for large size ingot moulds weighing 8 tonnes and higher (First Revision) |
MTD 6 |
| 24 |
IS 3005 : Part 2 : 1979 |
Specification for grey cast iron ingot moulds, stools and slag ladles: Part 2 grey cast iron ingot moulds of mass more than eight tonnes (First Revision) |
MTD 6 |
| 25 |
IS 3005 : Part 3 : 1982 |
Specification for grey cast iron ingot moulds, stools and slag laddles: Part 3 grey cast iron ingot moulds of mass more than one tonne and up to eight tonnes (First Revision) |
MTD 6 |
| 26 |
IS 15493 : 2004 |
Gaseous Fire Extinguishing Systems - General Requirements |
CED 22 |
| 27 |
IS 15105 : 2002 |
Design and installation of fixed automatic sprinkler fire extinguishing systems - Code of practice |
CED 22 |
| 28 |
IS 11563 : 1986 |
Technical supply conditions for dynamic compressors |
MED 22 |
