SNo |
IS Number |
Title |
Technical Committee |
1 |
IS 10175 : 2018 |
Metallic materials - Sheet and strip - Erichsen cupping test (Third Revision) |
MTD 3 |
2 |
IS 15262 : 2002 |
Geometrical product specifications (GPS) - surface texture: profile method - Terms, definitions and surface texture parameters |
PGD 25 |
3 |
IS 15421 : Part 2 : 2003 |
Geometrical product specifications (GPS) - Surface texture: profile method - Surfaces having stratified functional properties: Part 2 height characterization using the linear material ratio curve |
PGD 25 |
4 |
IS 15421 : Part 3 : 2003 |
Geometrical product specifications (GPS) - Surface texture: profile method - surfaces having stratified functional properties: Part 3 height characterization using the material probability curve |
PGD 25 |
5 |
IS 15422 : 2003 |
Geoivietrical product specifications (GPS) - Surface texture: profile method - motif parameters |
PGD 25 |
6 |
IS 16365 : 2015 |
Light conveyor belts - Determination of the coefficient of friction |
PGD 40 |
7 |
IS 17144 : Part 3 : 2019 |
Metallic materials - Instrumented indentation test for hardness and materials parameters: Part 3 calibration of reference blocks |
MTD 3 |
8 |
IS/ISO 13356 : 2015 |
Implants for Surgery – Ceramic Materials Based on Yttria-Stabilized Tetragonal Zirconia ( Y-TZP ) |
MHD 2 |
9 |
IS 16783 : 2018 |
Cable Cleats for Electrical Installations |
ETD 14 |
10 |
IS/IEC 62155 : 2003 |
Hollow Pressurized and Unpressurized Ceramic and Glass Insulators for Use in Electrical Equipment with Rated Voltages Greater Than 1 000 V |
ETD 6 |
11 |
IS 513 : Part 1 : 2016 |
Cold reduced carbon steel sheet and strip: Part 1 cold forming and drawing purpose (Sixth Revision) |
MTD 4 |
12 |
IS 513 : Part 2 : 2016 |
Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision) |
MTD 4 |
13 |
IS 16808 : 2018 |
Safety of machinery - Hygiene requirements for the design of machinery |
MED 40 |
14 |
IS 10983 : 1994 |
Fluid power - Cylinders - Housing for piston and rod seals in reciprocating applications - Dimensions and tolerances - Recommendations (First Revision) |
PGD 36 |
15 |
IS 15045 : Part 1 : 2001 |
Pneumatic fluid power - Five port directional control valves: Part 1 mounting interface surfaces without electrical connector |
PGD 36 |
16 |
IS 15045 : Part 2 : 2001 |
Pneumatic fluid power - Five port directional control valves: Part 2 mounting interface surfaces with optional electrical connector |
PGD 36 |
17 |
IS 14147 : Part 2 : 2018 |
Identification cards — Recording technique — Part 2: Magnetic stripe: Low coercivity |
LITD 16 |
18 |
IS 14147 : Part 7 : 2018 |
Identification cards - Recording technique: Part 7 magnetic stripe - High coercivity, high density (First Revision) |
LITD 16 |
19 |
IS 15545 : Part 2 : 2004 |
Rotary shaft lip - Type seals incorporating thermoplastic sealing elements: Part 2 vocabulary |
MED 30 |
20 |
IS/ISO 27020 : 2019 |
Dentistry Brackets and tubes for use in orthodontics |
MHD 8 |
21 |
IS/ISO 19023 : 2018 |
Dentistry Orthodontic anchor screws |
MHD 8 |
22 |
IS 13360 : Part 4 : Sec 5 : 2000 |
Plastics - Methods of testing: Part 4 rheological properties section 5 determination of the fluidity of plastics using capillary and slit - Die rheometers |
PCD 27 |
23 |
IS/IEC 60143 : Part 1 : 2015 |
SERIES CAPACITORS FOR POWER SYSTEMS PART 1 : GENERAL (Second Revision) |
ETD 29 |
24 |
IS 14197 : 1994 |
Code for model acceptance tests of hydraulic turbines |
MED 22 |
25 |
IS 9294 : 1979 |
Cold-Rolled Stainless Steel Strips for Razor Blades |
MTD 16 |
26 |
IS/ISO/IEC/TR 23187 : 2020 |
Information Technology Cloud Computing Interacting with Cloud Service Partners CSNs |
SSD 10 |
27 |
IS 4824 : 2022 |
Bead wires for tyres - Specification |
MTD 4 |
28 |
IS 1154 : 2022 |
Temporary Corrosion Preventive Fluid, Soft Film, Solvent Deposited, Water Displacing - Specification (second revision) |
PCD 25 |
29 |
IS 2744 : 2022 |
1-Naphthylamine (Second Revision) |
PCD 26 |
30 |
IS/ISO 7425 : PART 1 : 1988 |
Hydraulic fluid power - Housings for elastomer - Energized, piastic - Faced seals - Dimensions and tolerances: Part 1 piston seal housings |
PGD 36 |
31 |
IS 14802 : Part 2 : 2019 |
Plain Bearing — Hardness Testing of Bearing Metals Part 2 Solid Materials ( First Revision ) |
PGD 13 |
32 |
IS 9397 : 2001 |
Alpine skis and bindings - Binding mounting area - Requirements and test methods (First Revision) |
PGD 27 |
33 |
IS 16150 : Part 1 : 2023 |
Fish feed - Specification Part 1 Carp feed |
FAD 12 |
34 |
IS 12067 : 2023 |
Palm fatty acids - Specification (first revision of IS 12067) |
FAD 13 |