| SNo |
IS Number |
Title |
Technical Committee |
|
1 |
IS 456 : 2000 |
Plain and reinforced concrete - Code of practice (Fourth Revision) |
CED 2 |
|
2 |
IS 2131 : 1981 |
Method for Standard Penetration Test for Soils (First Revision) |
CED 43 |
|
3 |
IS 2132 : 1986 |
Code of Practice for Thin-Walled Tube Sampling of Soils (Second Revision) |
CED 43 |
|
4 |
IS 2386 : Part 5 : 1963 |
Methods of Test for Aggregates for Concrete: Part V Soundness |
CED 2 |
|
5 |
IS 2629 : 1985 |
Recommended practice for hot-dip galvanizing of iron and steel (First Revision) |
MTD 24 |
|
6 |
IS 2720 : Part 4 : 1985 |
Methods of test for soils: Part 4 grain size analysis (Second Revision) |
CED 43 |
|
7 |
IS 2720 : Part 5 : 1985 |
Methods of test for soils: Part 5 determination of liquid and plastic limit (Second Revision) |
CED 43 |
|
8 |
IS 2720 : Part 8 : 1983 |
Methods of test for soils: Part 8 determination of water content - Dry density relation using heavy compaction (Second Revision) |
CED 43 |
|
9 |
IS 2720 : Part 11 : 1993 |
Methods of test for soils: Part 11 determination of the shear strength parameters of a specimen tested in unconsolidated undrained triaxial compression without the measurement of pore water pressure (First Revision) |
CED 43 |
|
10 |
IS 2720 : Part 12 : 1981 |
Methods of test for soils: Part 12 determination of shear strength parameters of soil from consolidated undrained triaxial compression test with measurement of pore water pressure (First Revision) |
CED 43 |
|
11 |
IS 2720 : Part 13 : 1986 |
Methods of test for soils: Part 13 Direct shear test |
CED 43 |
|
12 |
IS 3025 : Part 17 : 2022 |
Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater Part 17 Non- Filterable Residue Total Suspended Solids at 103 C - 105 C (Second Revision) |
CHD 36 |
|
13 |
IS 3025 : Part 18 : 2022 |
Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater Part 18 Volatile and Fixed Solids (Total, Filterable and Non-Filterable at 550 C (Second Revision) |
CHD 36 |
|
14 |
IS 3025 : Part 24 : Sec 1 : 2022 |
Methods of Sampling and Test (Physical and Chemical) for Water and Waste Water Part 24 Sulphates Section 1 Gravimetric and Turbidity Methods (Second Revision) |
CHD 36 |
|
15 |
IS 2720 : Part 30 : 1980 |
Methods of test for soils: Part 30 Laboratory vane shear test |
CED 43 |
|
16 |
IS 3025 : Part 32 : 1988 |
Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater: Part 32 Chloride (First Revision) |
CHD 36 |
|
17 |
IS 4759 : 1996 |
Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision) |
MTD 24 |
|
18 |
IS 4968 : Part 3 : 1976 |
Method for subsurface sounding for soils: Part 3 Static cone penetration test |
CED 43 |
|
19 |
IS 5529 Part 1 : 2013 |
In-situ permeability test Part 1 Test in overburden - Code of practice |
WRD 5 |
|
20 |
IS 1367 : Part 13 : 2020 |
Technical Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized Coatings on Threaded Fasteners ( Third Revision ) |
PGD 37 |
|
21 |
IS 7887 : 1992 |
Mild steel wire rod for general engineering purposes - Specification (First Revision) |
MTD 4 |
|
22 |
IS 11309 : 2023 |
Method for Conducting Pull-Out Test on Anchor Bars and Rock Bolts (First Revision) |
CED 48 |
|
23 |
IS 11720 : Part 5 : 1993 |
Methods of test for synthetic rubber: Part 5 determination of ash |
PCD 29 |
|
24 |
IS 13094 : 2021 |
Selection of ground improvement techniques for foundation in weak soils - Guidelines (first revision) |
CED 43 |
|
25 |
IS 13162 : Part 2 : 1991 |
Geotextiles – Methods of test Part 2 Determination of resistance to exposure of ultraviolet light and water (Xenon-arc type apparatus) |
TXD 30 |
|
26 |
IS 13162 : Part 3 : 2021 |
Geosynthetics - Determination of thickness at specified pressures (Part 3) : Single layers |
TXD 30 |
|
27 |
IS 13162 : Part 4 : 1992 |
Geotextiles – Methods of test Part 4 Determination of puncture resistance by falling cone method |
TXD 30 |
|
28 |
IS 13326 : Part 1 : 1992 |
Evaluation of interface friction between geosynthetics and soil method of test: Part 1 modified direct shear technique |
TXD 30 |
|
29 |
IS 13365 : Part 1 : 1998 |
Quantitative Classification System of Rock Mass - Guidelines : Part 1 Rock Mass Rating (RMR) for Predicting of Engineering Properties |
CED 48 |
|
30 |
IS 14293 : 1995 |
Geotextiles - Method of test for trapezoid tearing strength |
TXD 30 |
|
31 |
IS 14294 : 1995 |
Geotextiles - Method for determination of apparent opening size by dry sieving technique |
TXD 30 |
|
32 |
IS 14324 : 1995 |
Geotextiles – Methods of test for determination of water permeability – Permittivity |
TXD 30 |
|
33 |
IS 14716 : 2021 |
Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products |
TXD 30 |
|
34 |
IS 15328 : 2003 |
Unplasticized Non-Pressure Polyvinyl Chloride (PVC-U) Pipes for Use in Underground Drainage and Sewerage Systems - Specification |
CED 50 |
|
35 |
IS 15736 : 2007 |
Geological exploration by geophysical method (Electrical Resistivity) - Code of practice |
WRD 5 |
|
36 |
IS 16014 : 2018 |
Mechanically woven, double - Twisted, hexagonal wire mesh gabions, revet mattresses, rock fall netting and other products for civil engineering purposes (Galvanized Steel Wire Or Galvanized Steel Wire With Polymer Coating) - Specification (First Revision) |
MED 10 |
|
37 |
IS 16237 : 2014 |
Geo-synthetics – Method for determination of apparent opening size by wet sieving |
TXD 30 |
|
38 |
IS 16342 : 2015 |
Geosynthetics - Method of test for grab breaking load and elongation of geotextiles |
TXD 30 |
|
39 |
IS 16352 : 2020 |
Geosynthetics – High density polyethylene (HDPE) geomembranes for lining – Specification (first revision) |
TXD 30 |
|
40 |
IS 16362 : 2020 |
Geosynthetics - Geotextiles used in subgrade stabilization in pavement structures - Specification (first revision) |
TXD 30 |
|
41 |
IS 16380 : 2020 |
Geosynthetics – Method of test for measuring pullout resistance of geosynthetics in soil (first revision) |
TXD 30 |
|
42 |
IS 16389 : 2015 |
Geosynthetics - Method of test for biological clogging of geotextile or soil/geotextile filters |
TXD 30 |
|
43 |
IS 16732 : 2019 |
Galvanized structural steel - Specification |
MTD 4 |
|
44 |
IS 17365 : 2020 |
Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement |
TXD 30 |
|
45 |
IS 17368 : 2020 |
Geosynthetics – Determination of damage to geosynthetic caused during installation |
TXD 30 |
|
46 |
IS 17372 : 2020 |
Geosynthetics – Polymeric strip/geostrip used as soil reinforcement in retaining structures – Specification |
TXD 30 |
|
47 |
IS 17363 : 2020 |
Geotextiles and geotextile-related products – Screening test method for determining the resistance to liquids |
TXD 30 |
|
48 |
IS 17373 : 2020 |
Geosynthetics - Geogrids used in reinforced soil retaining structures - Specification |
TXD 30 |
|
49 |
IS 17483 : Part 1 : 2020 |
Geosynthetics - Geocells - Specification (Part 1) Load Bearing Application |
TXD 30 |
|
50 |
IS 17483 : Part 2 : 2020 |
Geosynthetics - Geocells - Specification (Part 2) Slope Erosion Protection Application |
TXD 30 |
|
51 |
IS 1364 : Part 3 : 2018 |
Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 3 Hexagon Nuts, Style 1 ( Size Range M 1.6 To M 64 ) |
PGD 37 |
|
52 |
IS 3025 : Part 24 : Sec 2 : 2021 |
Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater Part 24 Sulphates Section 2 Method by Continuous Flow Analysis |
CHD 36 |
|
53 |
IS 3025 : Part 11 : 2022 |
Methods of Sampling and Test (Physical and Chemical) for Water and Waste Water Part 11 pH value (Second Revision) |
CHD 36 |
|
54 |
IS 3400 : Part 1 : 2021 |
Methods of Test for Vulcanized Rubber Part 1 Tensile Stress-Strain Properties |
PCD 29 |
|
55 |
IS 3400 : Part 4 : 2012 |
Methods of test for vulcanized rubber: Part 4 accelerated ageing and heat resistance (Third Revision) |
PCD 29 |
|
56 |
IS 3400 : Part 6 : 2018 |
Methods of Test for Vulcanized Rubbers Part 6 Determination of the Effect of Liquids (Fourth Revision) |
PCD 29 |
|
57 |
IS 3400 : Part 10 : Sec 1 : 2022 |
METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 10 COMPRESSION SET SECTION 1 AT AMBIENT OR ELEVATED TEMPERATURES ( Third Revision ) |
PCD 29 |
|
58 |
IS 3400 : Part 10 : Sec 2 : 2022 |
METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 10 COMPRESSION SET SECTION 2 AT LOW TEMPERATURES ( Third Revision ) |
PCD 29 |
|
59 |
IS 3400 : Part 20 : 2018 |
Methods of Test for Vulcanized Rubbers - Part 20 : Resistance to Ozone Cracking - Static Strain Test (Second Revision) |
PCD 29 |
|
60 |
IS 13162 : Part 3 : 2021 |
Geosynthetics - Determination of thickness at specified pressures (Part 3) : Single layers |
TXD 30 |
|
61 |
IS 13360 : Part 5 : Sec 11 : 2013 |
Plastics - Methods of testing: Part 5 mechanical properties section 11 determination of indentation hardness by means of durometer (Shore Hardness) (First Revision) |
PCD 27 |
|
62 |
IS 14739 : 2021 |
Geotextiles and geotextile-related products Determination of tensile creep and creep rupture behaviour |
TXD 30 |
|
63 |
IS 16078 : 2013 |
Geosynthetics - Static puncture test (CBR Test) |
TXD 30 |
|
64 |
IS 16635 : 2017 |
Geosynthetics - Wide - Width tensile test |
TXD 30 |
|
65 |
IS 17179 : 2019 |
Geotextiles and geotextile-related products – Determination of water flow capacity in their plane |
TXD 30 |
|
66 |
IS 17369 : Part 1 : 2020 |
Geotextiles and geotextile-related products – Strength of internal structural junctions Part 1 Geocells |
TXD 30 |
