| SNo |
IS Number |
Title |
Technical Committee |
|
1 |
IS 15999 : Part 1 : 2021 |
Rotating electrical machines - Part 1 : Rating and performance |
ETD 15 |
|
2 |
IS 9206 : 1979 |
Dimensions of caps for tungsten filament general service electric lamps |
ETD 23 |
|
3 |
IS 616 : 2017 |
Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision) |
LITD 7 |
|
4 |
IS/IEC 60068 : Part 2 : Sec 2 : 2007 |
Environmental Testing Part 2: Tests - Test B Section 2: Dry Heat |
LITD 1 |
|
5 |
IS 9000 : Part 7 : Sec 3 : 2019 |
Environmental testing: Part 7 tests :: Sec 3 test Ec: rough handling shocks, primarily for equipment - Types specimens (First Revision) |
LITD 1 |
|
6 |
IS 9000 : Part 7 : Sec 7 : 2020 |
Environmental Testing Part 7 Tests Section 7 Test Eh: Hammer tests ( First Revision ) |
LITD 1 |
|
7 |
IS 9000 : Part 4 : 2020 |
Environmental Testing Part 4 Tests - Test Cab: Damp Heat, Steady State ( Second Revision ) |
LITD 1 |
|
8 |
IS 1271 : 2012 |
Electrical insulation - Thermal evaluation and designation (Second Revision) |
ETD 2 |
|
9 |
IS 2824 : 2007 |
Method for the determination of the proof and the comparative tracking indices of solid insulating materials (Second Revision) |
ETD 2 |
|
10 |
IS/IEC 60127 : PART 1 : 2006 |
Miniature fuses: Part 1 definitions for miniature fuses and general requirements for miniature fuse - Links (First Revision) |
ETD 39 |
|
11 |
IS/IEC 60127 : PART 2 : 2003 |
Miniature Fuses Part 2 Cartridge Fuse - Links (First Revision) |
ETD 39 |
|
12 |
IS/IEC 60127 : Part 4 : 2005 |
Miniature fuses Part 4 universal modular fuse - Links (Umf) - Through - Hole and surface mount types |
ETD 39 |
|
13 |
IS 694 : 2010 |
Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1 100 V (Fourth Revision) |
ETD 9 |
|
14 |
IS 4289 : Part 2 : 2000 |
Flexible cables for lifts and other flexible connections - Specification: Part 2 pvc insulated circular cables |
ETD 9 |
|
15 |
IS 9968 : Part 1 : 1988 |
Specification for elastomer insulated cables: Part 1 for working voltages up to and including 1 100 volts (First Revision) |
ETD 9 |
|
16 |
IS 2993 : 1998 |
A.C. motor capacitors (Second Revision) |
ETD 29 |
|
17 |
IS/IEC 60309 : PART 2 : 2021 |
Plugs fixed or portable socket-outlets and appliance inlets for industrial purposes Part 2: Dimensional compatibility requirements for pin and contact-tube accessories Second Revision |
ETD 14 |
|
18 |
IS/IEC 60320 : PART 1 : 2021 |
Appliance couplers for household and similar general purposes Part 1: General requirements Second Revision |
ETD 14 |
|
19 |
IS/IEC 60320 : PART 2 : Sec 3 : 2018 |
Appliance couplers for household and similar general purposes Part 2-3: Appliance couplers with a degree of protection higher than IPX0 Second Revision |
ETD 14 |
|
20 |
IS/IEC 60529 : 2001 |
Degrees of protection provided by enclosures (IP Code) |
ETD 1 |
|
21 |
IS 10322 : Part 1 : 2014 |
Luminaires: Part 1 general requirements and tests (First Revision) |
ETD 49 |
|
22 |
IS/IEC 60603 : Part 11 : 1992 |
Connectors for frequencies below 3 MHz for use with printed boards Part 11: Detail specification for concentric connectors dimensions for free connectors and fixed connectors |
LITD 3 |
|
23 |
IS 15382 : Part 1 : 2022 |
Insulation Coordination for Equipment Within Low-Voltage Systems Part 1 Principles Requirements and Tests |
ETD 19 |
|
24 |
IS 15382 : Part 3 : 2019 |
Insulation coordination for equipment within low-voltage systems : Part 3 use of coating potting or moulding for protection against pollution |
ETD 19 |
|
25 |
IS 15382 : Part 4 : 2017 |
Insulation Coordination for Equipment Within Low-voltage Systems Part 4 Consideration of High-frequency Voltage Stress (First Revision) |
ETD 19 |
|
26 |
IS/IEC 60691 : 2018 |
Thermal Links - Requirements and Application Guide (First Revision) |
ETD 39 |
|
27 |
IS/IEC 60695 : Part 2 : Sec 11 : 2021 |
Fire Hazard Testing Part 2: Glowinghot-wire based test methods Section 11: Glow-wire flammability test method for end products GWEPT |
LITD 1 |
|
28 |
IS/IEC 60695 : Part 2 : Sec 12 : 2021 |
Fire Hazard Testing Part 2: Glowinghot-wire based test methods Section 12: Glow-wire flammability index GWFI Test method for materials |
LITD 1 |
|
29 |
IS/IEC 60695 : Part 2 : Sec 13 : 2021 |
Fire Hazard Testing Part 2 GlowingHot wire based test methods Section 13 Glow-wire ignition temperature GWIT test method for materials |
LITD 1 |
|
30 |
IS/IEC 60695 : Part 10 : Sec 2 : 2014 |
Fire hazard testing: Part 10 Abnormal heat: Sec 2 ball pressure test method |
LITD 1 |
|
31 |
IS/IEC 60695 : Part 11 : Sec 5 : 2016 |
Fire Hazard Testing Part 11 Test Flames Section 5 Needle - Flame test method - Apparatus, confirmatory test arrangement and guidance ( First Revision ) |
LITD 1 |
|
32 |
IS/IEC 60695 : Part 11 : Sec 10 : 2013 |
Fire hazard testing: Part 11 test flames :: Sec 10 50 w horizontal and vertical flame test methods |
LITD 1 |
|
33 |
IS/IEC 60730 : PART 1 : 1999 |
Automatic electrical controls for household and similar use : part 1 General Requirements |
ETD 32 |
|
34 |
IS/IEC 60730 : Part 2 : Sec 9 : 2011 |
Automatic Electrical Controls for Household and Similar Use Part 2 Particular Requirements Section 9 Temperature Sensing Controls |
ETD 32 |
|
35 |
IS 11534 : Part 1 : 1985 |
Specification for directly heated positive step - Function temperature coefficient thermistors: Part 1 general requirements and methods of tests |
LITD 5 |
|
36 |
IS/IEC 60990 : 2016 |
Methods of measurement of touch current and protective conductor current (First Revision) |
LITD 7 |
|
37 |
IS 14700 : Part 4 : Sec 2 : 2018 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 2 electrostatic discharge immunity test (Second Revision) |
LITD 9 |
|
38 |
IS 14700 : Part 4 : Sec 3 : 2018 |
Electromagnetic Compatibility (EMC) Part 4 Testing and Measurement Techniques Section 24 Test methods for protective devices for HEMP conducted disturbance ( First Revision ) |
LITD 9 |
|
39 |
IS 14700 : Part 4 : Sec 4 : 2018 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 4 electrical fast transient / burst immunity test (Second Revision) |
LITD 9 |
|
40 |
IS 14700 : Part 4 : Sec 5 : 2019 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 5 surge immunity test (First Revision) |
LITD 9 |
|
41 |
IS 14700 : Part 4 : Sec 6 : 2016 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 6 immunity to conducted disturbances, induced by radio - Frequency fields |
LITD 9 |
|
42 |
IS 14700 : Part 4 : Sec 11 : 2021 |
Electromagnetic compatibility EMC: Part 4 testing and measurement techniques: Sec 11 voltage dips short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
LITD 9 |
|
43 |
IS 14700 : Part 4 : Sec 13 : 2016 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 13 harmonics and interharmonics including mains signaling at a.c. power port, low frequency immunity test |
LITD 9 |
|
44 |
IS 14700 : Part 4 : Sec 34 : 2017 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 34 voltage dips, short interruptions and voltage variations immunity tests for current more than 16 A per phase |
LITD 9 |
|
45 |
IS 1401 : 2008 |
Protection of persons and equipment by enclosures - Probes for verification (Second Revision) |
ETD 32 |
|
46 |
IS/IEC 61058 : PART 1 : 2016 |
Switches for appliances: Part 1 general requirements First revision |
ETD 14 |
|
47 |
IS 16826 : 2018 |
High - Voltage Test Techniques For Low-Voltage Equipment - Definitions, Test and Procedure Requirements, Test Equipment |
ETD 19 |
|
48 |
IS/IEC 61558 : PART 1 : 1997 |
Safety of power transformers, power supply units and similar: Part 1 general requirements and tests |
ETD 16 |
|
49 |
IS/IEC 61558 : Part 2 : Sec 6 : 1997 |
Safety of power transformers, power supply units and similar: Part 2 particular requirement: Sec 6 safety isolating transformers for general use |
ETD 16 |
|
50 |
IS 16046 : Part 1 : 2018 |
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision ) |
ETD 11 |
|
51 |
IS 16046 : Part 2 : 2018 |
Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision ) |
ETD 11 |
|
52 |
IS 16108 : 2012 |
Photobiological safety of lamps and lamp systems |
ETD 23 |
|
53 |
IS 17048 : 2018 |
Halogen free flame retardant (HFFR) cables for working voltages up to and including 1 100 Volts - Specification |
ETD 9 |
|
54 |
IS 13360 : Part 5 : Sec 7 : 2022 |
PLASTICS METHOD OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 7 DETERMINATION OF FLEXURAL PROPERTIES |
PCD 27 |
|
55 |
IS 13360 : Part 5 : Sec 4 : 2021 |
Plastics - Methods of Testing Part 5 : Mechanical Properties Sec 4 Determination of Izod Impact Strength |
PCD 27 |
|
56 |
IS 13360 : Part 5 : Sec 1 : 2021 |
Plastics - Methods of testing: Part 5 Mechanical properties Section 1 Determination of tensile properties - General requirements Second Revision |
PCD 27 |
|
57 |
IS 13360 : Part 5 : Sec 2 : 2017 |
Plastics - Methods of testing: Part 5 mechanical properties section 2 determination of tensile properties - Test conditions for moulding and extrusion plastics (First Revision) |
PCD 27 |
|
58 |
IS 13360 : Part 5 : Sec 3 : 2022 |
PLASTICS METHOD OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 3 DETERMINATION OF TENSILE PROPERTIES TEST CONDITIONS FOR FILMS AND SHEETS |
PCD 27 |
|
59 |
IS 13360 : Part 5 : Sec 25 : 2004 |
Plastics - Methods of testing: Part 5 mechanical properties section 25 determination of tensile properties - Test conditions for isotropic and orthotropic fibre - Reinforced plastic composites |
PCD 27 |
|
60 |
IS 2102 : Part 1 : 1993 |
General tolerances: Part 1 tolerances for linear and angular dimensions without individual tolerance indications (Third Revision) |
PGD 37 |
|
61 |
IS 17863 : Part 1 : 2022 |
Plastics Methods of Exposure to Laboratory Light Sources: Part 1 General Guidance |
PCD 27 |
|
62 |
IS 17863 : Part 2 : 2022 |
Plastics Methods of Exposure to Laboratory Light Sources: Part 2 Xenon-Arc Lamps |
PCD 27 |
|
63 |
IS 16450 : 2023 |
Graphical Symbols for Use on Equipment Registered Symbols |
PGD 1 |
|
64 |
IS 13360 : Part 5 : Sec 27 : 2022 |
Plastics — Methods of Testing Part 5 Mechanical Properties Section 27 Determination of tensile-impact strength |
PCD 27 |
|
65 |
IS 13360 : Part 6 : Sec 24 : 2024 |
Plastics — Methods of Testing Part 6 Thermal Properties Section 24 Cellular Plastics — Determination of Horizontal Burning Characteristics of Small Specimens Subjected to a Small Flame (First Revision) |
PCD 27 |
|
66 |
IS 13360 : Part 6 : Sec 23 : 2006 |
Plastics - Methods of testing: Part 6 thermal properties section 23 determination of burning behaviour of thin fiexibie verticai specimens in contact with smaii - Fiame ignition source |
PCD 27 |
|
67 |
IS/IEC 62368 : Part 1 : 2018 |
Audio / Video, Information and Communication Technology Equipment Part 1 Safety Requirements ( First Revision ) |
LITD 7 |
|
68 |
IS 14700 : Part 4 : Sec 2 : 2018 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 2 electrostatic discharge immunity test (Second Revision) |
LITD 9 |
|
69 |
IS 14700 : Part 4 : Sec 3 : 2018 |
Electromagnetic Compatibility (EMC) Part 4 Testing and Measurement Techniques Section 24 Test methods for protective devices for HEMP conducted disturbance ( First Revision ) |
LITD 9 |
|
70 |
IS 14700 : Part 4 : Sec 4 : 2018 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 4 electrical fast transient / burst immunity test (Second Revision) |
LITD 9 |
|
71 |
IS 14700 : Part 4 : Sec 5 : 2019 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 5 surge immunity test (First Revision) |
LITD 9 |
|
72 |
IS 14700 : Part 4 : Sec 6 : 2016 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 6 immunity to conducted disturbances, induced by radio - Frequency fields |
LITD 9 |
|
73 |
IS 14700 : Part 4 : Sec 34 : 2017 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 34 voltage dips, short interruptions and voltage variations immunity tests for current more than 16 A per phase |
LITD 9 |
|
74 |
IS/IEC 127 : PART 5 : 1988 |
Miniature fuses: Part 5 guidelines for quality assessment of miniature fuse - Links |
ETD 39 |
|
75 |
IS/IEC 127 : PART 6 : 1994 |
Miniature fuses: Part 6 fuse holders for miniature cartridge fuse links - Specification |
ETD 39 |
|
76 |
IS 10276 : Part 1 : 1982 |
Specification for edison screw lamp holders: Part 1 requirements and tests |
ETD 14 |
|
77 |
IS 11353 : 2023 |
Basic and Safety Principles for Man-Machine Interface Marking and Identification - Identification of Equipment Terminals Conductor Terminations and Conductors (First Revision) |
ETD 1 |
|
78 |
IS/IEC 61058 : Part 1 : Sec 1 : 2016 |
SWITCHES FOR APPLIANCES PART 1 GENERAL REQUIREMENTS SECTION 1 PARTICULAR REQUIREMENTS FOR MECHANICAL SWITCHES |
ETD 14 |
|
79 |
IS/IEC 61058 : Part 1 : Sec 2 : 2016 |
SWITCHES FOR APPLIANCES PART 1 GENERAL REQUIREMENTS SECTION 2 PARTICULAR REQUIREMENTS FOR ELECTRONICS SWITCHES |
ETD 14 |
|
80 |
IS 13360 : Part 5 : Sec 5 : 2017 |
Plastics - Methods of testing: Part 5 mechanical properties section 5 determination of charpy impact properties - Non - Instrumented impact test (First Revision) |
PCD 27 |
|
81 |
IS 13360 : Part 5 : Sec 26 : 2023 |
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 26 DETERMINATION OF TENSILE PROPERTIES TEST CONDITIONS FOR UNIDIRECTIONAL FIBRE-REINFORCED PLASTIC COMPOSITES |
PCD 27 |
|
82 |
IS 13736 : Part 2 : Sec 1 : 2020 |
Classification of Environmental Conditions Part 2 Environmental Conditions Appearing in Nature Section 1 Temperature and humidity ( First Revision ) |
LITD 1 |
