| SNo |
IS Number |
Title |
Technical Committee |
|
1 |
IS 398 : Part 5 : 1992 |
Aluminium conductor for overhead transmission purposes - Specification: Part 5 aluminium conductors - Galvanized steel - Reinforced for extra high voltage (400 KV And Above) (First Revision) |
ETD 37 |
|
2 |
IS 456 : 2000 |
Plain and reinforced concrete - Code of practice (Fourth Revision) |
CED 2 |
|
3 |
IS 731 : 1971 |
Specification for procelain insulators for overhead power lines with a nominal voltage greater than 1000 V (Second Revision) |
ETD 6 |
|
4 |
IS 1573 : 1986 |
Specification for electroplated coatings of zinc on iron and steel (Second Revision) |
MTD 24 |
|
5 |
IS 1885 : Part 30 : 1971 |
Electrotechnical vocabulary: Part 30 overhead transmission and distribution of electrical energy |
ETD 1 |
|
6 |
IS 2121 : Part 1 : 1981 |
Specification for conductors and earth wire accessories for overhead power lines: Part 1 armour rods, binding wires and tapes for conductors (First Revision) |
ETD 37 |
|
7 |
IS 2121 : Part 4 : 1991 |
Conductors and earthwire accessories for overhead lines: Part 4 non - Tension joints - Specification |
ETD 37 |
|
8 |
IS/IEC 60071 : Part 1 : 2019 |
Insulation Coordination Part 1 Definition Principles And Rules (First Revision) |
ETD 19 |
|
9 |
IS/IEC 60071 : PART 2 : 2018 |
Insulation Coordination Part 2: Application Guide |
ETD 19 |
|
10 |
IS 2551 : 1982 |
Danger notice plates (First Revision) |
ETD 20 |
|
11 |
IS 2633 : 1986 |
Method for testing uniformity of coating on zinc coated articles (Second Revision) |
MTD 24 |
|
12 |
IS 3043 : 2018 |
Code of practice for earthing (Second Revision) |
ETD 20 |
|
13 |
IS/IEC 60471 : 1977 |
Dimensions of Clevis and Tongue Couplings of String Insulator Units |
ETD 6 |
|
14 |
IS 802 : Part 1 : Sec 1 : 2015 |
Use of structural steel in overhead transmission line towers - Code of practice: Part 1 materials, loads and design strengths: sec 1 materials and loads (Fourth Revision) |
CED 7 |
|
15 |
IS 802 : Part 1 : Sec 2 : 2016 |
Use of Structural Steel in Overhead Transmission Line Towers - Code of Practice: Part 1 Material, Loads and Design Strengths: Sec 2 Design Strengths (Fourth Revision) |
CED 7 |
|
16 |
IS 802 : Part 2 : 1978 |
Code of practice for use of structural steel in overhead transmission line towers: Part 2 fabrication galvanizing, inspection and packing |
CED 7 |
|
17 |
IS 802 : Part 3 : 1978 |
Code of Practice for Use of Structural Steel In Overhead Transmission Line Towers, Part 3 Testing |
CED 7 |
|
18 |
IS 1367 : Part 13 : 2020 |
Technical Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized Coatings on Threaded Fasteners ( Third Revision ) |
PGD 37 |
|
19 |
IS 4091 : 1979 |
Code of practice for design and construction of foundations for transmission line towers and poles (First Revision) |
CED 43 |
|
20 |
IS 4759 : 1996 |
Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision) |
MTD 24 |
|
21 |
IS 5613 : Part 1 : Sec 1 : 1985 |
Code of practice for design, installation and maintenance of overhead power lines: Part 1 lines up to and including 11 kV Sec 1 design (First Revision) |
ETD 37 |
|
22 |
IS 5613 : Part 2 : Sec 1 : 1985 |
Code of practice or design, installation and maintenance of overhead power lines: Part 2 lines above 11 kv and up to and including 220 kv sec 1 design (First Revision) |
ETD 37 |
|
23 |
IS 5613 : Part 2 : Sec 2 : 1985 |
Code of practice for design, installation and maintenance of overhead power lines: Part 2 lines above 11 kV and up to and including 220 Kv: Sec 2 installation and maintenance (First Revision) |
ETD 37 |
|
24 |
IS 10162 : 1982 |
Specification for spacers and spacer dampers for twin horizontal bundle conductors |
ETD 37 |
|
25 |
IS 12776 : 2002 |
Galvanized strand for earthing - Specification (First Revision) |
MED 10 |
|
26 |
IS 12360 : 1988 |
Voltage bands for electrical installations including preferred voltages and frequency |
ETD 1 |
|
27 |
IS 2486 : Part 4 : 1981 |
Specification for insulator fittings for overhead power lines with a nominal voltage greater than 1000 V: Part iv tests for locking devices |
ETD 6 |
|
28 |
IS 16784 : 2018 |
Insulators for Overhead Lines - Composite Suspension and Tension Insulators for a.c. Systems with a Nominal Voltage Greater Than 1 000 V - Definitions, Test Methods and Acceptance Criteria |
ETD 6 |
|
29 |
IS/IEC 60383 : Part 1 : 1993 |
Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V Part 1 Ceramic or Glass Insulator Units for a.c. Systems — Definitions, Test Methods and Acceptance Criteria |
ETD 6 |
|
30 |
IS/IEC 60383 : Part 2 : 1993 |
Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V Part 2 Insulator Strings and Insulator Sets for a.c. Systems — Definitions, Test Methods and Acceptance Criteria |
ETD 6 |
|
31 |
IS 2121 : Part 2 : 1981 |
Specification for conductors and earth wire accessories for overhead power lines: Part 2 mid - Spain joints and repair sleeves - For conductors (First Revision) |
ETD 37 |
|
32 |
IS 1570 : Part 1 : 1978 |
Schedules for wrought steels: Part 1 steels specifed by tensile and/or yield properties (First Revision) |
MTD 16 |
|
33 |
: |
|
|
|
34 |
IS 1570 : Part 3 : 1979 |
Schedules for wrought steels: Part 3 carbon and carbon - Manganese free cutting steels (First Revision) |
MTD 16 |
|
35 |
IS 1570 : Part 4 : 1988 |
Schedules for wrought steels: Part 4 alloy steels (Alloy Constructional And Spring Steels) with specified chemical composition andd mechanical properties (First Revision) |
MTD 16 |
|
36 |
IS 1570 : Part 5 : 1985 |
Schedules for wrought steels: Part 5 stainless and heat - Resisting steels (Secoind Revision) |
MTD 16 |
|
37 |
IS 1570 : Part 6 : 1996 |
Schedules for wrought steels: Part 6 carbon and alloy tool steels (First Revision) |
MTD 16 |
|
38 |
IS 1570 : Part 7 : 1992 |
Schedule for wrought steels: Part 7 steels for elevated temperature service (Creep Resistant Steels) |
MTD 16 |
|
39 |
IS 1570 : Part 2 : Sec 1 : 1979 |
Schedules for wrought steels: Part 2 carbon steels (Unalloyed Steels): Sec 1 wrought products (Other Than Wires) with specified chemical composition and related properties (First Revision) |
MTD 16 |
|
40 |
IS 1570 : Part 2 : Sec 2 : 1987 |
Schedules for wrought fteels: Part 2 carbon steels (Unalloyed Steels): Sec 2 carbon steel wires with related properties (First Revision) |
MTD 16 |
