| SNo |
IS Number |
Title |
Technical Committee |
|
1 |
IS/IEC 60068 : Part 2 : Sec 6 : 2007 |
Environmental Testing Part 2 Tests Section 6 Test Fc: Vibration sinusoidal |
LITD 1 |
|
2 |
IS 9000 : Part 7 : Sec 1 : 2018 |
Basic environmental testing procedures for electronic and electrical items: Part 7 impact test: Sec 1 shock (Test Ea) (Second Revision) |
LITD 1 |
|
3 |
IS 11000 : Part 2 : Sec 1 : 2018 |
Fire hazard testing: Part 2 test methods: Sec 1 glow - Wire apparatus and common test procedure (Second Revision) |
LITD 1 |
|
4 |
IS/IEC 60695 : Part 2 : Sec 11 : 2014 |
Fire Hazard Testing Part 2-11 Glowing / Hot-Wire Based Test Methods Glow-Wire Flammability Test Method for End-Products ( GWEPT ) |
LITD 1 |
|
5 |
IS/IEC 60695 : Part 2 : Sec 12 : 2014 |
Fire Hazard Testing Part 2 Glowing / Hot-Wire Based Test Methods Section 12 Glow-wire flammability index ( GWFI ) test method for materials |
LITD 1 |
|
6 |
IS/IEC 60947 : PART 1 : 2020 |
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR PART 1 GENERAL RULES |
ETD 7 |
|
7 |
IS 14700 : Part 4 : Sec 2 : 2018 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 2 electrostatic discharge immunity test (Second Revision) |
LITD 9 |
|
8 |
IS 14700 : Part 4 : Sec 3 : 2018 |
Electromagnetic Compatibility (EMC) Part 4 Testing and Measurement Techniques Section 24 Test methods for protective devices for HEMP conducted disturbance ( First Revision ) |
LITD 9 |
|
9 |
IS 14700 : Part 4 : Sec 4 : 2018 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 4 electrical fast transient / burst immunity test (Second Revision) |
LITD 9 |
|
10 |
IS 14700 : Part 4 : Sec 6 : 2016 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 6 immunity to conducted disturbances, induced by radio - Frequency fields |
LITD 9 |
|
11 |
IS 14700 : Part 4 : Sec 8 : 2018 |
Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 8 power frequency magnetic field immunity test (Second Revision) |
LITD 9 |
|
12 |
IS 14700 : Part 4 : Sec 11 : 2021 |
Electromagnetic compatibility EMC: Part 4 testing and measurement techniques: Sec 11 voltage dips short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase |
LITD 9 |
|
13 |
IS 16996 : 2018 |
Low-Voltage Electrical Installations — Energy Efficiency |
ETD 20 |
|
14 |
IS 16997 : 2018 |
Requirements for Low-Voltage Special Electrical Installations or Locations Solar Photovoltaic ( PV ) Power Supply Systems |
ETD 20 |
|
15 |
IS 6873 : Part 4 : 2019 |
Limits and Methods of Measurement of Radio Disturbance Characteristics Part 4 Industrial Scientific and Medical Radio-Frequency Equipment Second Revision |
LITD 9 |
|
16 |
IS/IEC 61076 : Part 1 : 2019 |
Connectors for electronic equipment Product requirements Part 1: Generic specification |
LITD 3 |
|
17 |
IS/IEC 61076 : Part 4 : Sec 100 : 2001 |
Connectors for electronic equipment Part 4-100: Printed board connectors with assessed quality Detail specification for two-part connector modules having a grid of 2.5 mm for printed boards and backplanes |
LITD 3 |
|
18 |
IS/IEC 61076 : Part 4 : Sec 101 : 2001 |
Connectors for electronic equipment Part 4-101: Printed board connectors with assessed quality Detail specification for two-part connector modules having a basic grid of 2.0 mm for printed boards and backplanes in accordance with IEC 60917 |
LITD 3 |
|
19 |
IS/IEC 61076 : Part 4 : Sec 102 : 1997 |
Connectors with assessed quality for use in d.c., low-frequency analogue and in digital high speed data applications – Part 4: Printed board connectors – Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917 |
LITD 3 |
|
20 |
IS/IEC 61076 : Part 4 : Sec 103 : 1999 |
Connectors for use in dc low-frequency analogue and digital high speed data applications Part 4-103: Printed board connectors with assessed quality Detail specification for two-part connectors with shielding and a basic grid of 2.5 mm |
LITD 3 |
|
21 |
IS/IEC 61076 : Part 4 : Sec 104 : 1999 |
Connectors for use in d.c., low frequency analogue and digital high speed data applications – Part 4-104: Printed board connectors with assessed quality – Detail specification for two-part modular connectors, basic grid of 2.0 mm, with terminations on a multiple grid of 0.5 mm |
LITD 3 |
|
22 |
IS/IEC 61076 : Part 4 : Sec 105 : 1995 |
Connectors with assessed quality for use in dc low-frequency analogue and in digital high-speed data applications - Part 4: Printed board connectors - Section 105: Detail specification for 9 mm circular connector with 3 to 8 contacts for use in a wide range of applications including the telecommunication and audio industry |
LITD 3 |
|
23 |
IS/IEC 61076 : Part 4 : Sec 107 : 2001 |
Connectors for electronic equipment – Part 4-107: Printed board connectors with assessed quality – Detail specification for shielded two-part connectors having a basic grid of 2.0 mm, fixed part with solder and press-in terminations for printed boards, free part with non-accessible insulation displacement and crimp terminations |
LITD 3 |
|
24 |
IS/IEC 61076 : Part 4 : Sec 108 : 2002 |
Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality -Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2.5 mm in accordance with IEC 60917-1 |
LITD 3 |
|
25 |
IS/IEC 61076 : Part 4 : Sec 110 : 2001 |
Connectors for electronic equipment- Part 4-110: Printed board connectors with assessed quality Detail specification for latched cable connector system having a basic grid of 2.0 mm including full shielding and latching function |
LITD 3 |
|
26 |
IS/IEC 61076 : Part 4 : Sec 113 : 2002 |
Connectors for electronic equipment – Printed board connectors – Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2.54 mm for printed boards and backplanes in bus applications |
LITD 3 |
|
27 |
IS/IEC 61076 : Part 4 : Sec 115 : 2003 |
Connectors for electronic equipment Part 4-115: Printed board connectors Backplane connector for InfiniBand equipment |
LITD 3 |
|
28 |
IS/IEC 61076 : Part 4 : Sec 116 : 2015 |
Connectors for electronic equipment Product requirements Part 4-116: Printed board connectors Detail specification for a high-speed two-part connector with integrated shielding function |
LITD 3 |
|
29 |
IS/IEC 62443 : Part 1 : Sec 1 : 2009 |
Industrial Communication Networks Part 1 Network and System Security Section 1 Terminology, concepts and models |
ETD 18 |
|
30 |
IS/IEC 62443 : Part 2 : Sec 4 : 2017 |
Security for Industrial Automation and Control Systems Part 2: Section 4: Security Program Requirements for IACS Service Providers |
ETD 18 |
|
31 |
IS/IEC 62443 : Part 3 : Sec 3 : 2013 |
Industrial Communication Networks Part 3 Network and System Security Section 3 System security requirements and security levels |
ETD 18 |
|
32 |
IS/IEC 62443 : Part 4 : Sec 1 : 2018 |
Security for Industrial Automation and Control Systems Part 4 Section 1 Secure Product Development Lifecycle Requirements |
ETD 18 |
|
33 |
IS/IEC 62443 : Part 4 : Sec 2 : 2019 |
Security for Industrial Automation and Control Systems Part 4 Sec 2 Technical Security Requirements for IACS Components |
ETD 18 |
|
34 |
IS 16108 : 2012 |
Photobiological safety of lamps and lamp systems |
ETD 23 |
|
35 |
IS 16108 : Part 2 : 2018 |
Photobiological safety of lamps and lamp systems: Part 2 guidance on manufacturing requirements relating to non - Laser optical radiation safety |
ETD 23 |
|
36 |
IS 16108 : Part 3 : 2018 |
Photobiological safety of lamps and lamp systems: Part 3 guidelines for the safe use of intense pulsed light source equipment on humans |
ETD 23 |
