| SNo |
IS Number |
Title |
Technical Committee |
|
1 |
IS 14962 : Part 3 : 2001 |
ISO general purpose metric screw threads - Tolerances: Part 3 deviations for constructional screw threads |
PGD 37 |
|
2 |
IS 2932 : 2013 |
Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification : Part 1 For domestic and decorative applcations (Fourth Revision) |
CHD 20 |
|
3 |
IS 1161 : 2014 |
Steel tubes for structural purposes - Specification (Fifth Revision) |
MTD 19 |
|
4 |
IS 1239 : Part 1 : 2004 |
Steel tubes, tubulars and other wrought steel fittings - Specification: Part 1 steel tubes (Sixth Revision) |
MTD 19 |
|
5 |
IS 1239 : Part 2 : 2011 |
Steel tubes, tubulars and other steel fittings - Specification: Part 2 steel pipe fittings (Fifth Revision) |
MTD 19 |
|
6 |
IS 1363 : Part 1 : 2019 |
Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 1 Hexagon Head Bolts ( Size Range M 5 to M 64 ) ( Fifth Revision ) |
PGD 37 |
|
7 |
IS 1363 : Part 3 : 2018 |
Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 3 (Style 1) Hexagon Nuts ( Size Range M 5 to M 64 ) ( Fifth Revision ) |
PGD 37 |
|
8 |
IS 1364 : Part 1 : 2018 |
Hexagon head bolts, screws and nuts of product grades A and B: Part 1 hexagon head bolts (Size Range M 1.6 To M 64) (Fifth Revision) |
PGD 37 |
|
9 |
IS 1367 : Part 11 : 2020 |
Technical Supply Conditions for Threaded Steel Fasteners Part 11 Electroplated Coating Systems ( Fourth Revision ) |
PGD 37 |
|
10 |
IS 1367 : Part 14 : Sec 1 : 2018 |
Technical supply conditions for threaded steel fasteners: Part 14 mechanical properties of corrosion - Resistant stainless - Steel fasteners section 1 bolts, screws and studs (Fourth Revision) |
PGD 37 |
|
11 |
IS 1367 : Part 14 : Sec 2 : 2018 |
Technical Supply Conditions for Threaded Steel Fasteners Part 14 Mechanical Properties of Corrosion-resistant Stainless steel Fasteners Section 2 Nuts (Fourth Revision) |
PGD 37 |
|
12 |
IS 1573 : 1986 |
Specification for electroplated coatings of zinc on iron and steel (Second Revision) |
MTD 24 |
|
13 |
IS 2030 : 1989 |
Box spanners - Specification (Second Revision) |
PGD 34 |
|
14 |
IS 2062 : 2011 |
Hot rolled medium and high tensile structural steel - Specification (Seventh Revision) |
MTD 4 |
|
15 |
IS 2074 : 1992 |
Ready Mixed Paint, Air Drying, Red Oxide Zinc Chrome, Priming |
CHD 20 |
|
16 |
IS 210 : 2009 |
Grey iron castings - Specification (Fifth Revision) |
MTD 6 |
|
17 |
IS 2102 : Part 1 : 1993 |
General tolerances: Part 1 tolerances for linear and angular dimensions without individual tolerance indications (Third Revision) |
PGD 37 |
|
18 |
IS 2269 : 2006 |
Hexagon socket head cap screws (Fifth Revision) |
PGD 37 |
|
19 |
IS 2403 : 2014 |
Short - Pitch transmission precision roller and bush chains, attachments and associated chain sprockets (Third Revision) |
PGD 33 |
|
20 |
IS 2500 : Part 1 : 2000 |
Sampling procedures for inspection by attributes: Part 1 sampling schemes indexed by acceptance quality limit (AQL) for lot - By - Lot inspection (Third Revision) |
MSD 3 |
|
21 |
IS 2629 : 1985 |
Recommended practice for hot-dip galvanizing of iron and steel (First Revision) |
MTD 24 |
|
22 |
IS 2643 : 2005 |
Pipe threads where pressure - Tight joints are not made on the threads - Dimensions, tolerances and designation (Third Revision) |
PGD 37 |
|
23 |
IS 2811 : 1987 |
Recommendations for manual tungsten inert - Gas arc welding of austenitic stainless steel (First Revision) |
MTD 11 |
|
24 |
IS 318 : 1981 |
Specification for leaded tin bronze ingots and castings (Second Revision) |
MTD 8 |
|
25 |
IS 3400 : Part 1 : 2012 |
Methods of test for vulcanized rubber: Part 1 determination of tensile stress - Strain properties (Third Revision) |
PCD 29 |
|
26 |
IS 3400 : Part 2 : 2014 |
Methods of test for vulcanized rubber: Part 2 rubber, vulcanized or thermoplastic - Determination of hardness (Hardness Between 10 Irhd And 100 Irhd) (Fourth Revision) |
PCD 29 |
|
27 |
IS 3400 : Part 22 : 1984 |
Methods of test for vulcanized rubber: Part 22 chemical analysis |
PCD 29 |
|
28 |
IS 3400 : Part 6 : 2018 |
Methods of Test for Vulcanized Rubbers Part 6 Determination of the Effect of Liquids (Fourth Revision) |
PCD 29 |
|
29 |
IS 3428 : 2009 |
Dimensions for relief grooves (Second Revision) |
PGD 37 |
|
30 |
IS 407 : 1981 |
Specification for brass tubes for general purposes (Third Revision) |
MTD 8 |
|
31 |
IS 4454 : Part 1 : 2001 |
Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision) |
MTD 4 |
|
32 |
IS 4695 : Part 1 : 2003 |
General purpose knuckle threads: Part 1 profile and nominal sizes (Second Revision) |
PGD 37 |
|
33 |
IS 4695 : Part 2 : 2003 |
General purpose knuckle threads: Part 2 deviations and tolerances (Second Revision) |
PGD 37 |
|
34 |
IS 4740 : 1979 |
Code of Practice for Packaging of Steel Tubes |
TED 24 |
|
35 |
IS 4759 : 1996 |
Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision) |
MTD 24 |
|
36 |
: |
|
|
|
37 |
IS 5206 : 1983 |
Specification for covered electrodes for manual metal arc welding of stainless steel and other similar high alloy steels (First Revision) |
MTD 11 |
|
38 |
IS 549 : 2005 |
Split pins - Specification (Third Revision) |
PGD 37 |
|
39 |
IS 5517 : 1993 |
Steels for hardening and tempering - Speicification (Second Revision) |
MTD 16 |
|
40 |
IS 554 : 1999 |
Pipe threads where pressure - Tight joints are made on the threads - Dimensions, tolerances and designation (Fourth Revision) |
PGD 37 |
|
41 |
IS 6455 : 2020 |
Single Row Deep Groove Ball Bearings — Specification ( First Revision ) |
PGD 13 |
|
42 |
IS 6603 : 2001 |
Stainless steel bars and flats - Specification (First Revision) |
MTD 16 |
|
43 |
IS 6912 : 2005 |
Copper and copper alloys forging stock and forging - Specification (Second Revision) |
MTD 8 |
|
44 |
IS 7002 : 2018 |
Prevailing torque type hexagon regular nuts (With Non - Metallic Insert) - Property classes 5, 8 and 10 (Third Revision) |
PGD 37 |
|
45 |
IS 808 : 1989 |
Dimensions for hot rolled steel beam, column, channel and angle sections (Third Revision) |
CED 7 |
|
46 |
IS 9550 : 2001 |
Bright steel bars - Specification (First Revision) |
MTD 4 |
|
47 |
IS 9595 : 1996 |
Metal - Arc welding of carbon and carbon manganese steels - Recommendations (Fifth Revision) |
MTD 11 |
|
48 |
IS 9839 : 1981 |
Specification for chromate conversion coatings on electroplated zinc and cadmium coatings |
MTD 24 |
|
49 |
IS 1367 : Part 2 : 2002 |
Technical supply conditions for threaded steel fasteners: Part 2 tolerances for fasteners - Bolts, screws, studs and nuts - Product grades a, b and c (Third Revision) |
PGD 37 |
|
50 |
IS 3400 : Part 10 : 1977 |
Methods of test for vulcanized rubbers: Part x compression set at constant strain (First Revision) |
PCD 29 |
