| SNo |
IS Number |
Title |
Technical Committee |
|
1 |
IS 554 : 1999 |
Pipe threads where pressure - Tight joints are made on the threads - Dimensions, tolerances and designation (Fourth Revision) |
PGD 37 |
|
2 |
IS 919 : Part 1 : 2014 |
Geometrical Product Specifications (GPS) - ISO Code System for Tolerances on Linear Sizes Part 1 Basis of Tolerance, Deviation and Fits (Third Revision) |
PGD 20 |
|
3 |
IS 919 : Part 2 : 2014 |
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes: Part 2 tables of standard tolerance classes and limit deviation for holes and shafts (Second Revision) |
PGD 37 |
|
4 |
IS 2291 : 1990 |
Tangential keys and keyways (Third Revision) |
PGD 33 |
|
5 |
IS 2643 : 2005 |
Pipe threads where pressure - Tight joints are not made on the threads - Dimensions, tolerances and designation (Third Revision) |
PGD 37 |
|
6 |
IS 3824 : 2014 |
Rolling bearings -- Dynamic load ratings and rating life (Third Revision) |
PGD 13 |
|
7 |
IS 4218 : Part 2 : 2001 |
ISO general purpose metric screw threads: Part 2 general plan (Second Revision) |
PGD 37 |
|
8 |
IS 4218 : Part 3 : 1999 |
ISO general purpose metric screw threads: Part 3 basic dimensions (Second Revision) |
PGD 37 |
|
9 |
IS 4218 : Part 4 : 2001 |
ISO general purpose metric screw threads: Part 4 selected sizes for screws, bolts and nuts (Second Revision) |
PGD 37 |
|
10 |
IS 5571 : 2009 |
Guide for selection and installation of electrical equipment in hazardous areas (Other Than Mines) (Third Revision) |
ETD 22 |
|
11 |
IS 5935 : Part 1 : 2019 |
Rolling bearings -- Internal clearance: Part 1 Radial internal clearance for radial bearings (Second Revision) |
PGD 13 |
|
12 |
IS 7310 : Part 1 : 2019 |
Qualification Testing of Welders - Fusion Welding Part 1 Steels (First Revision) |
MTD 11 |
|
13 |
IS 7310 : Part 2 : 2019 |
Qualification Test of Welders - Fusion Welding Part 2 Aluminium and Aluminium Alloys ( First Revision ) |
MTD 11 |
|
14 |
IS 7310 : Part 3 : 2019 |
Approval Testing of Welders - Fusion Welding Part 3 Copper and Copper Alloys ( First Revision ) |
MTD 11 |
|
15 |
IS 7310 : Part 5 : 2019 |
Approval Testing of Welders - Fusion Welding Part 5 Titanium and Titanium Alloys, Zirconium and Zirconium Alloys (First Revision) |
MTD 11 |
|
16 |
IS 11064 : 1984 |
Guide for construction and use of rooms or buildings protected by pressurization, for installation of electrtcal apparatus for explosive gas atmospheres |
ETD 22 |
|
17 |
IS 14962 : Part 1 : 2018 |
ISO general purpose metric screw threads - Tolerances: Part 1 principles and basic data (First Revision) |
PGD 37 |
|
18 |
IS 14962 : Part 2 : 2001 |
ISO general purpose metric screw threads - Tolerances: Part 2 limits of sizes for general purpose external and internal screw threads - Medium quality |
PGD 37 |
|
19 |
IS 14962 : Part 3 : 2001 |
ISO general purpose metric screw threads - Tolerances: Part 3 deviations for constructional screw threads |
PGD 37 |
|
20 |
IS 14962 : Part 4 : 2001 |
ISO general purpose metric screw threads - Tolerances: Part 4 limits of sizes for hot - Dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or g after galvanizing |
PGD 37 |
|
21 |
IS 14962 : Part 5 : 2001 |
ISO general purpose metric screw threads - Tolerances: Part 5 limits of sizes for internal screw threads to mate with hot - Dip galvanized external screw threads with maximum size of tolerance position H before galvanizing |
PGD 37 |
|
22 |
IS 15999 : Part 1 : 2016 |
Rotating Electrical Machines Part 1 Rating and Performance (First Revision) |
ETD 15 |
|
23 |
IS 16537 : 2016 |
Pumps - Shaft sealing systems for centrifugal and rotary pumps |
MED 20 |
|
24 |
IS 16811 : 2018 |
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
MED 40 |
|
25 |
IS/ISO/TR 17766 : 2005 |
Centrifugal pumps handling viscous liquids - Performance corrections |
MED 20 |
|
26 |
IS/ISO 21940 : Part 11 : 2016 |
Mechanical vibration - Rotor balancing: Part 11 procedures and tolerances for rotors with rigid behaviour |
MED 28 |
|
27 |
IS/ISO 21940 : Part 12 : 2016 |
Mechanical vibration - Rotor balancing: Part 12 procedures and tolerances for rotors with flexible behaviour |
MED 28 |
|
28 |
IS/IEC 60079 : PART 0 : 2017 |
Explosive Atmospheres Part 0 Equipment — General Requirements ( Third Revision ) |
ETD 22 |
|
29 |
IS/IEC 60079 : Part 1 : 2014 |
Explosive Atmospheres - Part 1 : Equipment Protection by Flameproof Enclosures "d" |
ETD 22 |
|
30 |
IS/IEC 60079 : PART 2 : 2014 |
Explosive atmospheres: Part 2 equipment protection by pressurized enclosure ''p'' (First Revision) |
ETD 22 |
|
31 |
IS/IEC 60079 : PART 5 : 2015 |
Explosive atmospheres: Part 5 equipment protection by powder filling ''q'' (First Revision) |
ETD 22 |
|
32 |
IS/IEC 60079 Part 6 : 2015 |
Explosive atmospheres: Part 6 equipment protection by liquid immersion "O" (First Revision) |
ETD 22 |
|
33 |
IS/IEC 60079 : PART 7 : 2015 |
Explosive atmospheres: Part 7 equipment protection by increased safety "E" (First Revision) |
ETD 22 |
|
34 |
IS/IEC 60079 : Part 10 : Sec 2 : 2015 |
Explosive atmospheres: Part 10 classification of areas: Sec 2 explosive dust atmospheres (First Revision) |
ETD 22 |
|
35 |
IS/IEC 60079 : PART 11 : 2011 |
Explosive Atmospheres Part 11 Equipment Protection by Intrinsic Safety “i” (First Revision) |
ETD 22 |
|
36 |
IS/IEC 60079 : Part 13 : 2010 |
Explosive atmospheres: Part 13 equipment protection by pressurized room "P" |
ETD 22 |
|
37 |
IS/IEC 60079 : Part 15 : 2010 |
Explosive atmospheres: Part 15 equipment protection by type of protection "N" (First Revision) |
ETD 22 |
|
38 |
IS/IEC 60079 : PART 16 : 1990 |
Electrical apparatus for explosive gas atmospheres: Part 16 artificial ventilation for the protection of analyzer(S) houses |
ETD 22 |
|
39 |
IS/IEC 60079 : PART 17 : 2013 |
Explosive atmospheres: Part 17 electrical installations inspection and maintenance (First Revision) |
ETD 22 |
|
40 |
IS/IEC 60079 : PART 18 : 2014 |
Explosive atmospheres: Part 18 equipment protection by encapsulation ''m'' (Second Revision) |
ETD 22 |
|
41 |
IS/IEC 60079 : PART 19 : 2010 |
Explosive atmospheres: Part 19 equipment repair, overhaul and reclamation (First Revision) |
ETD 22 |
|
42 |
IS/IEC 60079 : PART 20 : SEC 1 : 2010 |
Explosive atmospheres: Part 20 material characteristics for gas and vapour classification: Sec 1 test methods and data |
ETD 22 |
|
43 |
IS/IEC 60079 : PART 25 : 2010 |
Explosive atmospheres: Part 25 intrinsically safe electrical systems (First Revision) |
ETD 22 |
|
44 |
IS/IEC 60079 Part 26 : 2014 |
Explosive Atmospheres Part 26 Equipment with Equipment Protection Level (EPL) GA ( First Revision ) |
ETD 22 |
|
45 |
IS/IEC 60079 : Part 27 : 2008 |
Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO) |
ETD 22 |
|
46 |
IS/IEC 60079 : PART 28 : 2015 |
Explosive atmospheres: Part 28 protection of equipment and transmission systems using optical radiation (First Revision) |
ETD 22 |
|
47 |
IS/IEC 60079 : Part 29 : Sec 4 : 2009 |
Explosive atmospheres: Part 29 gas detectors: Sec 4 performance requirements of open path detectors for flammable gases |
ETD 22 |
|
48 |
IS/IEC 60079 : Part 29 : Sec 1 : 2016 |
Explosive atmospheres Part 29 Gas detectors Section 1 Performance Requirements of Detectors for Flammable Gases (First Revision) |
ETD 22 |
|
49 |
IS/IEC 60079 : PART 29 : SEC 2 : 2015 |
Explosive atmospheres: Part 29 gas detectors: Sec 2 selection, installation, use and maintenance of detectors for flammable gases and oxygen (First Revision) |
ETD 22 |
|
50 |
IS/IEC 60079 : PART 30 : SEC : 1 : 2007 |
Explosive atmospheres: Part 30 electrical resistance trace heating: Sec 1 general and testing requirements |
ETD 22 |
|
51 |
IS/IEC 60079 : PART 30 : SEC : 2 : 2007 |
Explosive atmospheres: Part 30 electrical resistance trace heating: Sec 2 application guide for design, installation and maintenance |
ETD 22 |
|
52 |
IS/IEC/IEEE 60079 : Part 30 : Sec 1 : 2015 |
Explosive Atmospheres Part 30 Electrical Resistance Trace Heating Section 1 General and testing requirements ( First Revision ) |
ETD 22 |
|
53 |
IS/IEC 60079 : PART 31 : 2013 |
Explosive atmospheres: Part 31 equipment dust ignition protection by enclosure "T" (First Revision) |
ETD 22 |
|
54 |
IS/IEC 60079 : Part 35 : Sec 2 : 2011 |
Explosive Atmospheres Part 35 Caplights for use in Mines Susceptible to Firedamp Section 2 Performance and other safety related matters |
ETD 22 |
