| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 3938 : 1983 |
Specification for electric wire rope hoists (Second Revision) |
MED 14 |
| 2 |
IS 4137 : 2015 |
Heavy duty electric overhead travelling cranes including special service machines for use in steel work - Code of practice (Second Revision) |
MED 14 |
| 3 |
IS 5608 : Part 1 : 1991 |
Specification for low - Frequency cables and wires with PVC insulation and PVC sheath: Part 1 general requirements, test and measuring methods (First Revision) |
LITD 6 |
| 4 |
IS 5608 : Part 4 : 2000 |
Specification for low frequency wires and cables with PVC insulation and PVC sheath: Part 4 cables for indoor installations (First Revision) |
LITD 6 |
| 5 |
IS 5662 : 1991 |
Specification for TV aerial feeder cables (First Revision) |
LITD 6 |
| 6 |
IS/IEC 60947 : PART 1 : 2007 |
Low - Voltage switchgear and controlgear: Part 1 general rules (First Revision) |
ETD 7 |
| 7 |
IS/IEC 61058 : PART 1 : 2000 |
Switches for appliances: Part 1 general requirements |
ETD 14 |
| 8 |
IS 13573 : Part 1 : 2011 |
Cable accessories for extruded power cables - Specification: Part 1 for working voltages from 1.1 kV up to and including 3.3 kV (E) - Test methods and test requirements (First Revision) |
ETD 9 |
| 9 |
IS 13573 : Part 3 : 2011 |
Cable accessories for extruded power cables - Specification: Part 3 for working voltages from 3.3 kV (UE) up to and including 33 KV (E) - Test methods (First Revision) |
ETD 9 |
| 10 |
IS 14255 : 1995 |
Aerial bunched cables - For working voltages up to and including 1 100 Volts - Specification |
ETD 9 |
| 11 |
IS 4289 : Part 2 : 2000 |
Flexible cables for lifts and other flexible connections - Specification: Part 2 pvc insulated circular cables |
ETD 9 |
| 12 |
IS 692 : 1994 |
Paper insulated lead sheathed cables for rated voltage up to and including 33 kV - Specification (Third Revision) |
ETD 9 |
| 13 |
IS 7098 : Part 2 : 2011 |
Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision) |
ETD 9 |
| 14 |
IS 7098 : Part 3 : 1993 |
Cross - Linked polyethylene insulated thermoplastic sheathed cables - Specification: Part 3 for working voltages from 66 kV up to and including 220 kV |
ETD 9 |
| 15 |
IS 9857 : 1990 |
Welding cables - Specification (First Revision) |
ETD 9 |
| 16 |
IS 9968 : Part 2 : 2002 |
Specification for elastomer - Insulated cables: Part 2 for working voltages from 3.3 kV up to and including 33 kV (First Revision) |
ETD 9 |
| 17 |
IS 10241 : Part 2 : 1982 |
Specification for electrical cables for aircraft: Part 2 pren type electric cables |
TED 14 |
| 18 |
IS 10241 : Part 3 : 1987 |
Specification for electric cables for aircraft: Part 3 nyvin type electric cables |
TED 14 |
| 19 |
IS 8572 : 1993 |
Paper - Covered flexible/stranded copper conductors for transformer leads - Specification (First Revision) |
ETD 33 |
| 20 |
IS 17048 : 2018 |
Halogen free flame retardant (HFFR) cables for working voltages up to and including 1 100 Volts - Specification |
ETD 9 |
| 21 |
IS 14494 : 2019 |
Elastomer insulated flexible cables for use in mines - Specification (First Revision) |
ETD 9 |
| 22 |
IS 732 : 2019 |
Code of practice for electrical wiring installations (Fourth Revision) |
ETD 20 |
| 23 |
IS 17121 : 2019 |
General requirements for arc fault detection devices |
ETD 7 |
| 24 |
IS 16781 : 2018 |
Connectors for d.c. Application in Photovoltaic Systems Safety Requirements and Tests |
ETD 28 |
| 25 |
IS 17017 : Part 2 : Sec 2 : 2020 |
Electric Vehicle Conductive Charging System Part 2 Plugs, Socket - Outlets, Vehicle Connectors and Vehicle Inlets Section 2 Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories |
ETD 51 |
| 26 |
IS 16997 : 2018 |
Requirements for Low-Voltage Special Electrical Installations or Locations Solar Photovoltaic ( PV ) Power Supply Systems |
ETD 20 |
| 27 |
IS 17017 : Part 2 : Sec 1 : 2020 |
Electric Vehicle Conductive Charging System Part 2 Plugs, Socket-Outlets, Vehicle Connectors, and Vehicle Inlets Section 1 General requirements |
ETD 51 |
| 28 |
IS 17017 : Part 2 : Sec 3 : 2020 |
Electric Vehicle Conductive Charging System Part 2 Plugs, Socket - Outlets, Vehicle Connectors and Vehicle Inlets Section 3 Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers |
ETD 51 |
| 29 |
IS 17293 : 2020 |
Electric Cables for Photovoltaic Systems for Rated Voltage 1 500 V d.c. |
ETD 9 |
| 30 |
IS 2508 : 1984 |
Low Density Polyethylene Films |
PCD 12 |
| 31 |
IS 4582 : 2021 |
Textiles Womens Cardigan Knitted Specification Second Revision |
TXD 10 |
| 32 |
IS/IEC 60079 : PART 7 : 2015 |
Explosive atmospheres: Part 7 equipment protection by increased safety "E" (First Revision) |
ETD 22 |
| 33 |
IS/ISO 105 : Part N05 : 1993 |
Textiles Tests for colour fastness Part N05: Colour fastness to stoving |
TXD 5 |
| 34 |
IS 14927 : Part 2 : 2001 |
Cable Trunking and Ducting Systems for Electrical Installations : Part 2 Cable Trunking and Ducting Systems Intended for Mounting on Walls or Ceiling |
ETD 14 |
| 35 |
IS 8859 : 1978 |
Specification for cast copper tuyere |
MTD 8 |
| 36 |
IS 12640 : Part 1 : 2016 |
Residual current operated circuitBreakers without integral overcurrent protection for household and similar uses (Rccbs): Part 1 general rules (Second Revision) |
ETD 7 |
| 37 |
IS 5459 : 2023 |
BASEBALL SPECIFICATION |
PGD 41 |
