| SNo |
IS Number |
Title |
Technical Committee |
|
1 |
IS 816 : 1969 |
Code of practice for use of metal arc welding for general construction in mild steel (First Revision) |
MTD 11 |
|
2 |
IS 812 : 1957 |
Glossary of terms relating to welding and cutting of metals |
MTD 11 |
|
3 |
IS 813 : 1986 |
Scheme Of Symbols For Welding |
MTD 11 |
|
4 |
IS 1730 : 1989 |
Steel Plates, Sheets Strips and Flats for Structural and General Engineering Purposes - Dimensions (Second Revision) |
CED 7 |
|
5 |
IS 226 : 1975 |
Structural steel (Standard quality) |
MTD 4 |
|
6 |
IS 823 : 1964 |
Code of procedure for manual metal arc welding of mild steel |
MTD 11 |
|
7 |
IS 961 : 1975 |
Structural steel (high tensile) |
MTD 4 |
|
8 |
IS 2002 : 2009 |
Steel plate for pressure vessel for intermediate and high temperature service including boilers (Third Revision) |
MTD 4 |
|
9 |
IS 2041 : 2009 |
Steel plates for pressure vessels used at moderate and low temperature - Specification (Third Revision) |
MTD 4 |
|
10 |
IS 2062 : 2011 |
Hot rolled medium and high tensile structural steel - Specification (Seventh Revision) |
MTD 4 |
|
11 |
IS 1852 : 1985 |
Specification for rolling and cutting tolerances for hot - Rolled steel products (Fourth Revision) |
MTD 4 |
|
12 |
IS 1977 : 1996 |
Low Tensile Structural Steels |
MTD 4 |
|
13 |
IS 808 : 1989 |
Dimensions for hot rolled steel beam, column, channel and angle sections (Third Revision) |
CED 7 |
|
14 |
IS 1030 : 1998 |
Carbon steel castings for general engineering purposes - Specification (Fifth Revision) |
MTD 14 |
|
15 |
IS 814 : 2004 |
Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision) |
MTD 11 |
|
16 |
IS 1978 : 1982 |
Line Pipe |
MTD 19 |
|
17 |
IS 1979 : 1985 |
High Test Line Pipe |
MTD 19 |
|
18 |
IS 1239 : Part 2 : 2011 |
Steel tubes, tubulars and other steel fittings - Specification: Part 2 steel pipe fittings (Fifth Revision) |
MTD 19 |
|
19 |
IS 6392 : 2020 |
Steel Pipes Flanges — Specification ( First Revision ) |
MTD 19 |
|
20 |
IS 1367 : Part 1 : 2014 |
Technical supply conditions for threaded steel fasteners: Part 1 general requirements for bolts, screws, studs and nuts (Fourth Revision) |
PGD 37 |
|
21 |
IS 1367 : Part 2 : 2002 |
Technical supply conditions for threaded steel fasteners: Part 2 tolerances for fasteners - Bolts, screws, studs and nuts - Product grades a, b and c (Third Revision) |
PGD 37 |
|
22 |
IS 1367 : Part 3 : 2017 |
Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision) |
PGD 37 |
|
23 |
IS 1367 : Part 5 : 2018 |
Technical supply conditions for threaded steel fasteners: Part 5 mechanical properties of fasteners made of carbon steel and alloy steel - Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (Fourth Revision) |
PGD 37 |
|
24 |
IS 1367 : Part 6 : 2018 |
Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision) |
PGD 37 |
|
25 |
IS 1367 : Part 7 : 1980 |
Technical supply conditions for tHreadeD steel fasteners: Part 7 mechanical properties and test methods for nuts without specified proof loads (Second Revision) |
PGD 37 |
|
26 |
IS 1367 : Part 8 : 2020 |
Technical Supply Conditions for Threaded Steel Fasteners Part 8 Prevailing Torque Type Steel Nuts — Functional Properties ( Fifth Revision ) |
PGD 37 |
|
27 |
IS 1367 : Part 10 : 2002 |
Technical supply conditions for threaded steel fasteners: Part 10 surface discontinuities - Nuts (Third Revision) |
PGD 37 |
|
28 |
IS 1367 : Part 11 : 2020 |
Technical Supply Conditions for Threaded Steel Fasteners Part 11 Electroplated Coating Systems ( Fourth Revision ) |
PGD 37 |
|
29 |
IS 1367 : Part 12 : 1981 |
Technical supply conditions for threaded steel fasteners: Part 12 phosphate coatings on threaded fasteners (Second Revision) |
PGD 37 |
|
30 |
IS 1367 : Part 13 : 2020 |
Technical Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized Coatings on Threaded Fasteners ( Third Revision ) |
PGD 37 |
|
31 |
IS 1367 : Part 14 : 1984 |
Technical Supply Conditions for Threaded Steel Fasteners - Part 14 : Stainless Steel Threaded Fasteners (Second Revision) |
PGD 37 |
|
32 |
IS 1367 : Part 14 : Sec 1 : 2018 |
Technical supply conditions for threaded steel fasteners: Part 14 mechanical properties of corrosion - Resistant stainless - Steel fasteners section 1 bolts, screws and studs (Fourth Revision) |
PGD 37 |
|
33 |
IS 1367 : Part 14 : Sec 2 : 2018 |
Technical Supply Conditions for Threaded Steel Fasteners Part 14 Mechanical Properties of Corrosion-resistant Stainless steel Fasteners Section 2 Nuts (Fourth Revision) |
PGD 37 |
|
34 |
IS 1367 : Part 14 : Sec 3 : 2018 |
Technical supply conditions for threaded steel fasteners: Part 14 mechanical properties of corrosion - Resistant stainless steel fasteners section 3 set screws and similar fasteners not under tensile stress (Fourth Revision |
PGD 37 |
|
35 |
IS 1367 : Part 16 : 2002 |
Technical supply conditions for threaded steel fasteners: Part 16 designation system for fasteners (Third Revision) |
PGD 37 |
|
36 |
IS 1367 : Part 17 : 2005 |
Technical supply conditions for threaded steel fasteners: Part 17 inspections, sampling and acceptance procedure (Fourth Revision) |
PGD 37 |
|
37 |
IS 1367 : Part 18 : 1996 |
Industrial fasteners - Threaded steel fasteners - Technical supply conditions: Part 18 packaging (Third Revision) |
PGD 37 |
|
38 |
IS 1367 : Part 19 : 1997 |
Industrial fasteners - Threaded steel fasteners - Technical supply conditions: Part 19 axial load fatigue testing of bolts, screws and studs |
PGD 37 |
|
39 |
IS 1367 : Part 20 : 1996 |
Industrial fasteners - Threaded steel fasteners - Technical supply conditions - Mechanical properties: Part 20 torsional - Test and mlnimum torques for bolts and screws with nominal diameters 1 mm to 10 mm |
PGD 37 |
|
40 |
IS 875 : Part 1 : 1987 |
Code of practice for design loads (Other Than Earthquake) for buildings and structures: Part 1 dead loads - Unit weights of building materials and stored materials (Second Revision) |
CED 37 |
|
41 |
IS 875 : Part 2 : 1987 |
Code of practice for design loads (Other Than Earthquake) for buildings and structures: Part 2 imposed loads (Second Revision) |
CED 37 |
|
42 |
IS 875 : Part 5 : 1987 |
Codb of practice for design loads (Other Than Earthquake) for buildings and structures: Part 5 special loads and load combinations (Second Revision) |
CED 37 |
|
43 |
IS 817 : 1966 |
Code of practice for training and testing of metal arc welders (Revised) |
MTD 11 |
|
44 |
IS 1182 : 1983 |
Recommended - Practice for radiographic examination of fusion welded butt joints in steel plates (Second Revision) |
MTD 21 |
|
45 |
IS 2595 : 2008 |
Industrial radiographic testing - Code of practice (Second Revision) |
MTD 21 |
|
46 |
IS 875 : Part 4 : 1987 |
Code of practice for design loads (Other Than Earthquake) for buildings and structures: Part 4 snow loads (Second Revision) |
CED 37 |
|
47 |
IS 875 : Part 3 : 2015 |
Design Loads (Other than Earthquake) for Buildings and Structures - Code of Practice Part 3 Wind Loads ( Third Revision ) |
CED 37 |
