Indian Standard Details

    Print

IS Number : IS 875 (Part 3) : 2015
Reviewed In : 2020
IS Title [Eng-Hn] : Design Loads (Other than Earthquake) for Buildings and Structures - Code of Practice Part 3 Wind Loads ( Third Revision )
No of Revision : 3
No of Amendments : 2
Technical Department : Civil Engineering Department
Technical Committee : CED 37 ( Structural Safety )
Language : English

Group : Civil Engineering Design and Construction
Sub Group: Safety of structures
Sub Sub Group : Loading Codes
Aspects: Code of Practice
Certification:
Ministry : Ministry of Housing and Urban Affairs
Short Commom Man's Title: Wind load on buildings
Itchs:
Degree of Equivalence: Indigenous
Identical/Equivalent Standards:
Organisation :

Indian Standards Refered In IS IS 875 : Part 3 : 2015 :
SNo IS Number Title Technical Committee
1
IS 11504 : 2020 Criteria for Structural Design of Reinforced Concrete Natural Draught Cooling Towers ( First Revision ) CED 38
2
IS 14732 : 2000 Guidelines for the evaluation of the response of occupants of fixed structures, especially buildings and off - Shore structures, to low - Frequency horizontal motion (0.063 To 1 Hz) MED 28
3
IS 4998 : Part 1 : 1992 Criteria for design of reinforced concrete chimneys: Part 1 Assessment of loads CED 38
4
IS 5613 : Part 2 : Sec 1 : 1985 Code of practice or design, installation and maintenance of overhead power lines: Part 2 lines above 11 kv and up to and including 220 kv sec 1 design (First Revision) ETD 37
5
IS 6533 : Part 1 : 1989 Design and Construction of Steel Chimneys - Code of Practice: Part 1 Mechanical Aspects (First Revision) CED 38
6
IS 6533 : Part 2 : 1989 Code of Practice for Design and Construction of Steel Chimneys: Part 2 Structural Aspects (First Revision) CED 38
7
IS 802 : Part 1 : Sec 1 : 2015 Use of structural steel in overhead transmission line towers - Code of practice: Part 1 materials, loads and design strengths: sec 1 materials and loads (Fourth Revision) CED 7
International Standards Refered In IS 875 : Part 3 : 2015
SNo International Standard Number
1 0 0 : 0 : 0 0
IS 875 : Part 3 : 2015 is Refered in following Indian Standards :
SNo IS Number Title Technical Committee
1 IS 14462 : 1997 Recommendations for layout, design and construction of greenhouse structures FAD 22
2 IS 14687 : 1999 Falsework for Concrete Structures - Guidelines CED 2
3 IS 14458 : Part 2 : 1997 Retaining wall for hill area - Guidelines: Part 2 design of retaining/breast walls CED 56
4 IS 4247 : Part 3 : 1998 Code of practicefor structural design of surfacehydel power stations: Part 3 sub - Structure (Second Revision) WRD 15
5 IS 4247 : Part 2 : 1992 Code of practice for structural design of surface hydroelectric power station: Part 2 superstructure (Second Revision) WRD 15
6 IS 1343 : 2012 Prestressed Concrete - Code of Practice (Second Revision) CED 2
7 IS 807 : 2006 Design, erection and testing (Structural Portion) of cranes and hoists - Code of practice (Second Revision) MED 14
8 SP 62 : 1997 Handbook on causes and prevention of cracks in buildings CED 13
9 SP 70 : 2001 Handbook on construction safety practices CED 45
10 IS 16144 : 2014 Foodgrain storage godowns - Code of practice FAD 16
11 IS 11592 : 2000 Selection and design of belt conveyors - Code of practice (First Revision) MED 6
12 IS 14242 : 1995 Design and construction of roofs using precast reinforced concrete L - Panels - Code of practice CED 32
13 IS 13158 : 1991 Prestressed concrete circular spun poles for overhead power, traction and telecommunication lines - CED 53
14 IS 3007 : Part 1 : 1999 Laying of Asbestos Cement Sheets - Code of Practice - Part 1 : Corrugated Sheets CED 53
15 IS 785 : 1998 Reinforced concrete poles for overhead power and telecommunication lines - Specification (Second Revision) CED 53
16 IS 456 : 2000 Plain and reinforced concrete - Code of practice (Fourth Revision) CED 2
17 IS 16620 : 2017 Jig back movement monocable ropeways with fixed grips - Code of practice MED 6
18 IS 16623 : 2017 Pulsated movement monocable ropeways with fixed grips - Code of practice MED 6
19 IS 5230 : 2017 To and fro (Jig Back) movement Bi - Cable ropeways - Code of practice (Second Revision) MED 6
20 IS 1893 : Part 1 : 2016 Criteria for Earthquake Resistant Design of Structures - Part 1 : General Provisions and Buildings CED 39
21 IS 15912 : 2018 Structural design using bamboo - Code of practice (First Revision) CED 13
22 IS 4772 : 2019 Code of practice for construction of sugar godowns (Second Revision) FAD 2
23 IS 16231 : Part 3 : 2019 Use of Glass in Buildings — Code of Practice Part 3 Fire and Loading ( First Revision ) CED 13
24 IS 17232 : 2019 Continuous Movement Bicable/Tricable Ropeways with Detachable Grip - Code of Practice MED 6
25 IS 3177 : 2020 Electric Overhead Travelling Crane and Gantry Crane for all Applications — Code of Practice ( Third Revision ) MED 14
26 IS 16231 : Part 1 : 2019 Use of Glass in Buildings — Code of Practice Part 1 General Methodology for Selection ( First Revision ) CED 13
27 IS 16648 : Part 4 : 2018 Concentrated solar thermal? - Specification: Part 4 non - Imaging concentrator MED 4
28 IS 17164 : 2020 Design and Construction of Cyclone Shelters - Guidelines CED 57
29 IS 11504 : 2020 Criteria for Structural Design of Reinforced Concrete Natural Draught Cooling Towers ( First Revision ) CED 38
30 IS 14203 : 1999 Fire Resisting Record Protection Cabinets MED 24
31 IS 3370 : Part 2 : 2009 Code of Practice Concrete structures for the storage of liquids Part 2 Reinforced concrete structures CED 2
32 IS 4651 : Part 3 : 1974 Code of Practice for Planning and Design of Ports and Harbours - Part III : Loading CED 47
33 IS 803 : 1976 Code of Practice for Design, Fabrication and Erection of Vertical Mild Steel Cylindrical Welded Oil Storage Tanks (First Revision) CED 7
34 IS 805 : 1968 Code of practice for use of steel in gravity water tanks CED 7
35 IS 1904 : 1986 Code of practice for design and construction of foundations in soils : general requirements (Third Revision) CED 43
36 IS 2911 : Part 3 : 1980 Code of practice for design and construction of pile foundations: Part 3 Under-reamed piles CED 43
37 IS 17597 : 2021 Textile glass -- Yarns -- Basis for a specification TXD 40
38 IS 5521 : 1980 Specification for steel tanks for storage of molasses (First Revision) FAD 2
39 IS 17673 : 2021 Soy Amrakhand FAD 16
40 IS 15475 : Part 3 : 2004 Code of recommended practice for amusement rides safety: Part 3 design, manufacture and erection MED 6
41 IS/ISO 18587 : 2017 TRANSLATION SERVICES — POST-EDITING OF MACHINE TRANSLATION OUTPUT— REQUIREMENTS SSD 9
42 IS/IEC 60110 : Part 1 : 1998 Power Capacitors for Induction Heating Installations Part 1 General (First Revision) ETD 29
43 IS 15109 : Part 1 : 2021 DETERMINATION OF THE EFFECTS OF POLLUTANTS ON SOIL FLORA - PART 1: METHOD FOR THE MEASUREMENT OF INHIBITION OF ROOT GROWTH First Revision FAD 7
44 IS 15498 : 2004 Guidelines for improving the cyclonic resistance of low rise houses and other buildings/structures CED 57
45 IS/ISO 26262 : Part 8 : 2018 Road vehicles Functional safety Part 8: Supporting processes TED 11
46 IS 2210 : 1988 Criteria for design of reinforced concrete shell structures and folded plates (First Revision) CED 38
47 IS 4651 : Part 4 : 2014 Planning and design of ports and harbours - Code of practice: Part 4 general design considerations (Third Revision) CED 47
48 IS 16700 : 2017 Criteria for structural safety of tall concrete buildings CED 38
49 IS 6072 : 1971 Specification for autoclaved reinforced cellular concrete wall slabs CED 32
50 IS 6399 : 1971 Code of practice for construction of coffee seed storage structures FAD 6
51 IS 1893 : Part 4 : 2015 Criteria for Earthquake Resistant Design of Structures Part 4 Industrial Structures Including Stack - Like Structures ( First Revision ) CED 39
52 IS 8521 : Part 1 : 2022 Eye and face protection for occupational use : Part 1 General requirements (First Revision) CHD 8
53 IS 1948 : 1961 Specification for aluminium doors, windows and ventilators CED 11
54 IS 4991 : 1968 Criteria for blast resistant design of structures for explosions above ground CED 39