| SNo |
IS Number |
Title |
Technical Committee |
|
1 |
IS 210 : 2009 |
Grey iron castings - Specification (Fifth Revision) |
MTD 6 |
|
2 |
IS 1030 : 1998 |
Carbon steel castings for general engineering purposes - Specification (Fifth Revision) |
MTD 14 |
|
3 |
IS 2985 : 1990 |
Steel Castings for Ship's Structure |
MTD 14 |
|
4 |
IS 2073 : 1970 |
Carbon steel black bars for production of machined parts for general engineering purposes |
MTD 4 |
|
5 |
IS 306 : 1983 |
Specification for tin bronze ingots and castings (Third Revision) |
MTD 8 |
|
6 |
IS 3747 : 1982 |
Hot rolled steel plates and sheets for flanging and pressing |
MTD 4 |
|
7 |
IS 2016 : 1967 |
Specification for plain washers (First Revision) |
PGD 37 |
|
8 |
IS 1367 : Part 1 : 2014 |
Technical supply conditions for threaded steel fasteners: Part 1 general requirements for bolts, screws, studs and nuts (Fourth Revision) |
PGD 37 |
|
9 |
IS 1367 : Part 10 : 2002 |
Technical supply conditions for threaded steel fasteners: Part 10 surface discontinuities - Nuts (Third Revision) |
PGD 37 |
|
10 |
IS 1367 : Part 11 : 2020 |
Technical Supply Conditions for Threaded Steel Fasteners Part 11 Electroplated Coating Systems ( Fourth Revision ) |
PGD 37 |
|
11 |
IS 1367 : Part 12 : 1981 |
Technical supply conditions for threaded steel fasteners: Part 12 phosphate coatings on threaded fasteners (Second Revision) |
PGD 37 |
|
12 |
IS 1367 : Part 13 : 2020 |
Technical Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized Coatings on Threaded Fasteners ( Third Revision ) |
PGD 37 |
|
13 |
IS 1367 : Part 14 : 1984 |
Technical Supply Conditions for Threaded Steel Fasteners - Part 14 : Stainless Steel Threaded Fasteners (Second Revision) |
PGD 37 |
|
14 |
IS 1367 : Part 14 : Sec 1 : 2018 |
Technical supply conditions for threaded steel fasteners: Part 14 mechanical properties of corrosion - Resistant stainless - Steel fasteners section 1 bolts, screws and studs (Fourth Revision) |
PGD 37 |
|
15 |
IS 1367 : Part 14 : Sec 2 : 2018 |
Technical Supply Conditions for Threaded Steel Fasteners Part 14 Mechanical Properties of Corrosion-resistant Stainless steel Fasteners Section 2 Nuts (Fourth Revision) |
PGD 37 |
|
16 |
IS 1367 : Part 14 : Sec 3 : 2018 |
Technical supply conditions for threaded steel fasteners: Part 14 mechanical properties of corrosion - Resistant stainless steel fasteners section 3 set screws and similar fasteners not under tensile stress (Fourth Revision |
PGD 37 |
|
17 |
IS 1367 : Part 9 : Sec 2 : 1993 |
Technical supply conditions for threaded steel fasteners: Part 9 surface discontinuities section 2 bolts, screws and studs for special applications (Third Revision) |
PGD 37 |
|
18 |
IS 1367 : Part 16 : 2002 |
Technical supply conditions for threaded steel fasteners: Part 16 designation system for fasteners (Third Revision) |
PGD 37 |
|
19 |
IS 1367 : Part 17 : 2005 |
Technical supply conditions for threaded steel fasteners: Part 17 inspections, sampling and acceptance procedure (Fourth Revision) |
PGD 37 |
|
20 |
IS 1367 : Part 18 : 1996 |
Industrial fasteners - Threaded steel fasteners - Technical supply conditions: Part 18 packaging (Third Revision) |
PGD 37 |
|
21 |
IS 1367 : Part 19 : 1997 |
Industrial fasteners - Threaded steel fasteners - Technical supply conditions: Part 19 axial load fatigue testing of bolts, screws and studs |
PGD 37 |
|
22 |
IS 1367 : Part 2 : 2002 |
Technical supply conditions for threaded steel fasteners: Part 2 tolerances for fasteners - Bolts, screws, studs and nuts - Product grades a, b and c (Third Revision) |
PGD 37 |
|
23 |
IS 1367 : Part 20 : 1996 |
Industrial fasteners - Threaded steel fasteners - Technical supply conditions - Mechanical properties: Part 20 torsional - Test and mlnimum torques for bolts and screws with nominal diameters 1 mm to 10 mm |
PGD 37 |
|
24 |
IS 1367 : Part 3 : 2017 |
Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision) |
PGD 37 |
|
25 |
IS 1367 : Part 5 : 2018 |
Technical supply conditions for threaded steel fasteners: Part 5 mechanical properties of fasteners made of carbon steel and alloy steel - Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (Fourth Revision) |
PGD 37 |
|
26 |
IS 1367 : Part 6 : 2018 |
Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision) |
PGD 37 |
|
27 |
IS 1367 : Part 7 : 1980 |
Technical supply conditions for tHreadeD steel fasteners: Part 7 mechanical properties and test methods for nuts without specified proof loads (Second Revision) |
PGD 37 |
|
28 |
IS 1367 : Part 8 : 2020 |
Technical Supply Conditions for Threaded Steel Fasteners Part 8 Prevailing Torque Type Steel Nuts — Functional Properties ( Fifth Revision ) |
PGD 37 |
|
29 |
IS 1367 : Part 9 : Sec 1 : 1993 |
Technical supply conditions for threaded steel fasteners: Part 9 surface discontinuities section 1 bolts, screws and studs for general applications (Third Revision) |
PGD 37 |
|
30 |
IS 4190 : 1984 |
Specification for eye bolts with collars (First Revision) |
MED 14 |
|
31 |
IS 1363 : Part 1 : 2019 |
Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 1 Hexagon Head Bolts ( Size Range M 5 to M 64 ) ( Fifth Revision ) |
PGD 37 |
|
32 |
IS 1363 : Part 2 : 2018 |
Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 2 Hexagon Head Screws ( Size Range M 5 to M 64 ) ( Fifth Revision ) |
PGD 37 |
|
33 |
IS 1363 : Part 3 : 2018 |
Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 3 (Style 1) Hexagon Nuts ( Size Range M 5 to M 64 ) ( Fifth Revision ) |
PGD 37 |
|
34 |
IS 3138 : 1966 |
Hexagonal Bolts and Nuts (M42 to M150) |
PGD 37 |
|
35 |
IS 1365 : 2005 |
Slotted countersunk flat head screws (Common Head Style) - product grade a (Fourth Revision) |
PGD 37 |
|
36 |
IS 3406 : Part 1 : 1986 |
Dimensions for countersinks and counterbores: Part 1 countersinks (Second Revision) |
PGD 37 |
|
37 |
IS 3406 : Part 2 : 2014 |
Dimensions for countersinks and counterbores: Part 2 counterbores (Third Revision) |
PGD 37 |
|
38 |
IS 5519 : 1979 |
Deviations for untoleranced dimensions and mass of grey iron castings (First Revision) |
MTD 6 |
|
39 |
IS 4897 : 1994 |
Deviations on untoleranced dimensions and mass of steel castings (Third Revision) |
MTD 14 |
|
40 |
IS 2102 : Part 1 : 1993 |
General tolerances: Part 1 tolerances for linear and angular dimensions without individual tolerance indications (Third Revision) |
PGD 37 |
|
41 |
IS 2102 : Part 2 : 1993 |
General tolerances: Part 2 geometrical tolerances for features without individual tolerance indications |
PGD 37 |
|
42 |
IS 3073 : 1967 |
Assessment of surface roughness |
PGD 25 |
