| SNo |
IS Number |
Title |
Technical Committee |
| 1 |
IS 2661 : 1978 |
Specification for mobile library van (First Revision) |
CED 51 |
| 2 |
IS 13385 : 1992 |
Specification for Fire Extinguisher 50 Litre Capacity Wheel Mounted Water Type (gas Cartridge) |
CED 22 |
| 3 |
IS 13386 : 1992 |
Specification for Fire Extinguisher 50 Litre Capacity , Mechanical Foam Type |
CED 22 |
| 4 |
IS 10658 : 1999 |
Specification for Higher Capacity Dry Powder Fire Extinguisher (Trolley Mounted) |
CED 22 |
| 5 |
IS 14951 : 2001 |
Fire extinguisher - 135 litres capacity mechanical foam type - Specification |
CED 22 |
| 6 |
IS 7080 : Part 1 : 1992 |
MTP suction apparatus - Specification: Part 1 manually operated (Second Revision) |
MHD 3 |
| 7 |
IS 7080 : Part 2 : 1992 |
MTP suction apparatus - Specification: Part 2 electrical - Cum - Manually operated (First Revision) |
MHD 3 |
| 8 |
IS 7080 : Part 3 : 1992 |
MTP suction apparatus specification: Part 3 electrically operated (Second Revision) |
MHD 3 |
| 9 |
IS 7197 : 1974 |
Specification for double action floor springs (Without Oil Check) for heavy doors |
CED 15 |
| 10 |
IS 6315 : 1992 |
Floor springs (hydraulically regulated) for heavy doors - |
CED 15 |
| 11 |
IS 13896 : 1994 |
Machine operators table and visual display unit (VDU) table- |
CED 35 |
| 12 |
IS 3498 : 1993 |
Metal Table (office Type)-specification |
CED 35 |
| 13 |
IS 8467 : 1977 |
Specification for steel card - Index cabinets |
CED 35 |
| 14 |
IS 8126 : 1993 |
Specification for composite office tables (First Revision) |
CED 35 |
| 15 |
IS 8761 : 1978 |
Specification for steel folding cots |
CED 35 |
| 16 |
IS 9236 : 1993 |
Metal Letter-rests- |
CED 35 |
| 17 |
IS 9715 : 1981 |
Specification for steel visible indexing system cabinets |
CED 35 |
| 18 |
IS 6189 : 1985 |
Specification for metal stationery cupboards (First Revision) |
CED 35 |
| 19 |
IS 6179 : 1971 |
Specification and safety requirements for - Rigid sided playpens |
CED 35 |
| 20 |
IS 7076 : 1983 |
Specification for metal book ends (First Revision) |
CED 35 |
| 21 |
IS 7760 : 1985 |
Specification for steel glass - Front cabinets (First Revision J |
CED 35 |
| 22 |
IS 7761 : 1983 |
Specification for steel book cases (First Revision) |
CED 35 |
| 23 |
IS 4204 : 1974 |
Functional requirements for drafting chairs (First Revision) |
CED 35 |
| 24 |
IS 3762 : 1979 |
Metal Waste Paper Bins - Specification |
CED 35 |
| 25 |
IS 3763 : 1983 |
Metal Folding Chairs - Specification |
CED 35 |
| 26 |
IS 3313 : 1983 |
Steel Filing Cabinets for General Office Purposes - Specification |
CED 35 |
| 27 |
IS 1829 : Part 2 : 2017 |
Library furniture and fittings - Specification: Part 2 steel (Second Revision) |
CED 35 |
| 28 |
IS 2695 : 1993 |
Specification for drawing filing equipment (Second Revision) |
CED 35 |
| 29 |
IS 3314 : 1984 |
steel clothes lockers - Specification |
CED 35 |
| 30 |
IS 3499 : Part 2 : 1985 |
metal chairs for office purposes Specification Part 2 Revolving and tilting |
CED 35 |
| 31 |
IS 4103 : 1977 |
Metal Nesting Chairs- Specification |
CED 35 |
| 32 |
IS 4205 : 1989 |
Drafting stools - Specification (Second Revision) |
CED 35 |
| 33 |
IS 3499 : Part 1 : 1985 |
Metal Chairs For Office Purposes Specification Part 1 Non-revolving And Non-tilting |
CED 35 |
| 34 |
IS 5391 : 1992 |
Adjustable metal chairs for use of typists and operators in telephone exchanges-Specification |
CED 35 |
| 35 |
IS 3791 : 1983 |
Metal Paper Trays - Specification |
CED 35 |
| 36 |
IS 3497 : 1992 |
Steel Wardrobes (adjustable Type)-specification |
CED 35 |
| 37 |
IS 3075 : Part 1 : 1986 |
Specification for circlips: Part 1 for shafts (First Revision) |
PGD 35 |
| 38 |
IS 3075 : Part 2 : 1986 |
Specification for circlips: Part 2 for bores (First Revision) |
PGD 35 |
| 39 |
IS 3075 : Part 3 : 1986 |
Specification for circlips: Part 3 type e for shafts (First Revision) |
PGD 35 |
| 40 |
IS 11325 : 1985 |
Specification for adjustable clamp support |
PGD 35 |
| 41 |
IS 14912 : 2001 |
Door closers, concealed type (Hydraulically Regulated) - Specification |
CED 15 |
| 42 |
IS 3564 : 1995 |
Hydraulically Regulated Door Closers -Specification |
CED 15 |
| 43 |
IS 6149 : 1984 |
Specification for single - Ended open - Jaw adjustable wrenches (First Revision) |
PGD 34 |
| 44 |
IS 6125 : 2017 |
Enamel, synthetic, stoving, for automobiles - Specification (First Revision) |
CHD 20 |
| 45 |
IS 2980 : 1999 |
Non - Pressure stoves - Specification (Third Revision) |
MED 26 |
| 46 |
IS 1367 : Part 12 : 1981 |
Technical supply conditions for threaded steel fasteners: Part 12 phosphate coatings on threaded fasteners (Second Revision) |
PGD 37 |
| 47 |
IS 11760 : 1986 |
Specification for gravity - Fed kerosene wick stove |
MED 26 |
| 48 |
IS 6607 : 1972 |
Specification for rebated mortice locks (Vertical Type) |
MED 33 |
| 49 |
IS 6755 : 1980 |
Specification for double coil helical spring washers (First Revision) |
PGD 37 |
| 50 |
IS 9172 : 1979 |
Recommended design practice for corrosion prevention of steel structures |
MTD 24 |
| 51 |
IS 9077 : 1979 |
Code of practice for corrosion protection of steel reinforcement in RB and RCC construction |
MTD 24 |
| 52 |
IS 8062 : Part 4 : 1979 |
Code of practice for cathodic protection of steel structures: Part 4 Galvanic protection of dockgates, caissons, piers and jetties |
MTD 24 |
| 53 |
IS 6005 : 1998 |
Code of practice for phosphate coatings of iron and steel (First Revision) |
MTD 24 |
| 54 |
IS 10433 : Part 2 : 2002 |
Male stud tee body (Stud Run) for oil - Hydraulic couplings - Specification: Part 2 made from bar stock (First Revision) |
PGD 36 |
| 55 |
IS 12116 : Part 1 : 1987 |
Specification for hexagon head taper plugs for oil hydraulic systems: Part 1 made from forgings |
PGD 36 |
| 56 |
IS 14528 : 1998 |
Tube end straight reducers for oil - Hydraulic couplings |
PGD 36 |
| 57 |
IS 9412 : Part 1 : 1980 |
Specification for male stud elbow body for oil - Hydraulic couplings: Part 1 made from forgings |
PGD 36 |
| 58 |
IS 9412 : Part 2 : 1980 |
Specification for male stud elbow body for oil - Hydraulic couplings: Part 2 made from bar stock |
PGD 36 |
| 59 |
IS 9724 : Part 1 : 1981 |
Specification for taper male stud tee body (Stud Branch) for oil - Hydraulic couplings: Part 1 made from forgings |
PGD 36 |
| 60 |
IS 9724 : Part 2 : 1981 |
Specification for taper male stud tee body (Stud Branch) for oil - Hydraulic couplings: Part 2 made from bar stock |
PGD 36 |
| 61 |
IS 9725 : Part 1 : 1981 |
Specification for male stud tee body (Stud Branch) for oil - Hydraulic couplings: Part 1 made from forgings |
PGD 36 |
| 62 |
IS 12417 : 1988 |
Specification for suction apparatus, pedal operated |
MHD 11 |
| 63 |
IS 4533 : 1995 |
Suction apparatus - Specification (Second Revision) |
MHD 11 |
| 64 |
IS 13338 : 1992 |
Hexagonal head screw plugs with shoulder and parallel screw threads - Specification |
PGD 36 |
| 65 |
IS 9757 : Part 2 : 1983 |
Specification for bulkhead elbow body for oil - Hydraulic couplings: Part 2 made from bar stock |
PGD 36 |
| 66 |
IS 10410 : 1983 |
Specification for lock nuts for bulk head coupling assembly for oil - Hydraulic systems |
PGD 36 |
| 67 |
IS 9706 : 2019 |
Material handling ropeways - Code of practice (Second Revision) |
MED 6 |
| 68 |
IS 8098 : Part 1 : 1976 |
Code of practice for finishing of automobile bodies: Part 1 finishing of passenger cars |
CHD 20 |
| 69 |
IS 16322 : 2022 |
Graphic technology Displays for colour proofing Characteristics First Revision |
MSD 6 |
