BUREAU OF INDIAN STANDARDS
Programme of Work
TED18 : Inland, Harbour Crafts And Fishing Vessels
- Scope : a) Standardization of hull and deck fittings for inland vessels dredgers, tugs, hopper barges, launches, water barges and constructional practices, performance requirements, trials, machinery and equipment for fishing vessels and trawlers. b) Co-ordination of work with ISO/TC 188 & ISO/TC 8 and its relevant sub-committees ISO/TC 8/SC 7, ISO/TC 8/SC 8 and ISO/TC 8/SC 11.
-
Liaison :ISO/TC 188 - Small craft - Observer (O)
ISO/TC 8/SC 1 - Maritime safety - Participating (P)
ISO/TC 8/SC 6 - Navigation and ship operations - Observer (O)
ISO/TC 8/SC 7 - Inland navigation vessels - Participating (P)
ISO/TC 8/SC 8 - Ship design - Participating (P)
ISO/TC 8/WG 4 - Maritime security
|
IS 10199 : 1982 Reviewed In : 2023 |
Acceptance tests and trials for fishing vessels
|
March, 2023
|
-
|
Indigenous
|
|
|
IS 10227 : 1997 ISO 6115 Reviewed In : 2023 |
Fishing vessels - Trawl winches - Specification (First Revision)
|
March, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 10526 : 1996 ISO 3935 Reviewed In : 2022 |
Inlandvessels - Fire - Fighting watersystem - Pressures (First Revision)
|
February, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 10527 : 1983 ISO 3948 Reviewed In : 2023 |
Specificatcon for pressure ranges for compressed air system for inland vessels
|
March, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 10529 : 1983 Reviewed In : 2023 |
Guidelines for estimation of engine power for small mechanized fishing boats
|
March, 2023
|
-
|
Indigenous
|
|
|
IS 10530 : 1983 Reviewed In : 2023 |
Guidelines for selection of fish hold insulation
|
March, 2023
|
-
|
Indigenous
|
|
|
IS 10854 (Part 1) : 1984 Reviewed In : 2021 |
Specification - For cutter suction dredge components: Part 1 cutter
|
January, 2021
|
-
|
Indigenous
|
|
|
IS 10854 (Part 2) : 1984 Reviewed In : 2021 |
Spew ication for cutter suction dredge components: Part 2 suction pipe
|
January, 2021
|
-
|
Indigenous
|
|
|
IS 10854 (Part 3) : 1984 Reviewed In : 2021 |
Specification for cutter suction dredge components: Part 3 ladder
|
January, 2021
|
-
|
Indigenous
|
|
|
IS 10854 (Part 4) : 1984 Reviewed In : 2023 |
Specification for cutter suction dredge components: Part 4 spuds
|
November, 2023
|
-
|
Indigenous
|
|
|
IS 10854 (Part 5) : 1993 Reviewed In : 2023 |
Inlandvessels - Cutter suction dredge components: Part 5 cast spud point - General requirements
|
September, 2023
|
-
|
Indigenous
|
|
|
IS 10854 (Part 6) : 1993 Reviewed In : 2023 |
Inland vessels - Cutter suction dredge components: Part 6 cast spud cylinder - General requirements
|
July, 2023
|
-
|
Indigenous
|
|
|
IS 10855 : 1984 ISO 7607 Reviewed In : 2018 |
Specification for bucket capacities for multi - Bucket dredgers
|
November, 2018
|
-
|
Indigenous
|
|
|
IS 10858 : 1984 ISO 6217 Reviewed In : 2021 |
Identification painting and inscription code for pilot craft
|
January, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 10862 : 1984 Reviewed In : 2021 |
Classification and basic requirements of pilot craft
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 10868 : 1984 Reviewed In : 2018 |
Data sheet for reverse/direct reduction gear box for fishing vessels
|
November, 2018
|
1
|
Indigenous
|
|
|
IS 11253 : 1985 ISO 4085 Reviewed In : 2021 |
Specification for swing derricks
|
January, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 11294 (Part 1) : 1985 Reviewed In : 2021 |
Specification for side scuttles for inland vessels: Part 1 general requirements
|
January, 2021
|
-
|
Indigenous
|
|
|
IS 11339 : 1985 ISO 3926 Reviewed In : 2022 |
Dimensions for couplings for oil and fuel reception for inland vessels
|
February, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 11474 : 1985 ISO 6219 Reviewed In : 2021 |
General requirements of power operated windlasses and anchor capstans for inland vessels
|
January, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 11693 : 2006 ISO 21 Reviewed In : 2022 |
ShmwjiLdiNg - Inland navigation - Cable - Lifters for stud - Link anchor chains (First Revision)
|
February, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 11694 (Part 1) : 1986 ISO 7545 Reviewed In : 2022 |
Specification for single - Lock automatic couplings for push tows for inland navigation: Part 1 general requirements
|
February, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 11694 (Part 2) : 1986 ISO 7545 Reviewed In : 2022 |
Specification for single - Lock automatic couplings for push tows for inland navigation: Part 2 type a couplings
|
February, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 11694 (Part 3) : 1986 ISO 7545 Reviewed In : 2022 |
Specification for single - Lock automatic couplings for push tows for inland navigation: Part 3 type 6 couplings
|
February, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 11823 (Part 1) : 1986 ISO 7608 Reviewed In : 2022 |
Specification for couplings for disposal of oily mixture for inland vessels: Part 1 flange couplings
|
February, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 11823 (Part 2) : 1986 ISO 7608 Reviewed In : 2022 |
Specification for couplings for disposal of oily mixture for inland vessels: Part 2 quick release couplings
|
February, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 11823 (Part 3) : 1986 ISO 7608 Reviewed In : 2022 |
Specification for couplings for disposal of oily mixture for inland vessels: Part 3 adapters (Flange/end Piece)
|
February, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 11823 (Part 4) : 1986 ISO 7608 Reviewed In : 2022 |
Specification - For couplings for disposal of oily mixtures for inland vessels: Part 4 adapters (Flange/bush)
|
February, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 12115 (Part 1) : 1987 ISO 7608 Reviewed In : 2018 |
Specification for couplings for disposal of sewage water for inland vessels: Part 1 flange coupling
|
January, 2018
|
-
|
Identical under dual numbering
|
|
|
IS 12115 (Part 2) : 1987 ISO 7608 Reviewed In : 2018 |
Specification for couplings for disposal of sewage water for inland vessels: Part 2 quick - Release couplings
|
January, 2018
|
-
|
Identical under dual numbering
|
|
|
IS 12115 (Part 3) : 1987 ISO 7608 Reviewed In : 2018 |
Specification for couplings for disposal of sewage water for inland vessels: Part 3 adapters (Flange/end Piece)
|
January, 2018
|
-
|
Identical under dual numbering
|
|
|
IS 12115 (Part 4) : 1987 ISO 7608 Reviewed In : 2018 |
Specification for couplings for disposal of sewage water for inland vessels: Part 4 adapters (Flange/bush)
|
May, 2018
|
-
|
Identical under dual numbering
|
|
|
IS 12133 : 1987 Reviewed In : 2023 |
Glossary of terms and definitions for dredgers
|
March, 2023
|
-
|
Indigenous
|
|
|
IS 12134 : 1987 Reviewed In : 2023 |
Classification of dredgers
|
March, 2023
|
-
|
Indigenous
|
|
|
IS 12267 (Part 1) : 1987 Reviewed In : 2023 |
Guidelines for stability for inland and harbour vessels: Part 1 decked vessels
|
March, 2023
|
-
|
Indigenous
|
|
|
IS 12963 : 1990 Reviewed In : 2021 |
Inland vessels - Dredgers - Floaters - Specification
|
January, 2021
|
1
|
Indigenous
|
|
|
IS 13004 (Part 1) : 1990 ISO 4127-1 Reviewed In : 2021 |
Inland vessels - Fairleads - Specification: Part 1 two - Lip fairleads
|
January, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 13004 (Part 2) : 1990 ISO 4127-2 Reviewed In : 2021 |
Inland vessels - Fairleads - Specification: Part 2 roller fairleads
|
January, 2021
|
1
|
Identical under dual numbering
|
|
|
IS 13804 : 1993 Reviewed In : 2023 |
Inland vessels - Sheaves for dredgers - Dimensions
|
March, 2023
|
-
|
Indigenous
|
|
|
IS 13848 : 1993 Reviewed In : 2023 |
Inland vessels - Rubber fenders - Specification
|
March, 2023
|
-
|
Indigenous
|
|
|
IS 14171 : 1994 Reviewed In : 2018 |
Inland vessels - Bellows for dredgers - Specification
|
November, 2018
|
-
|
Indigenous
|
|
|
IS 14238 : 1995 Reviewed In : 2020 |
Inland vessels - Selection of rubber i fendbrs for berthing structures code of practice
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 14449 : 1997 ISO 7606 Reviewed In : 2023 |
Inland vessels - Draught scale - Specification
|
March, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 14545 : 2011 Reviewed In : 2019 |
Inland navigation vessels - Manually operated coupling devices for push tows - Safety requirements and main dimensions (First Revision)
|
October, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 14546 : 2009 Reviewed In : 2019 |
Acoustics - Measurement of airborne sound emitted by vessels on inland waterways and harbours (First Revision)
|
October, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 14546 : 2024 ISO 2922:2020 |
Acoustics — Measurement of Airborne Sound Emitted by Vessels on Inland Waterways and Harbours (Second Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 14646 : 1999 Reviewed In : 2018 |
Shipbuilding - Mooring buoy - Specification
|
March, 2018
|
-
|
Indigenous
|
|
|
IS 14762 : 1999 Reviewed In : 2019 |
Fishing vessels - Selection of propeller shafts for mechanized fishing boats - Guidelines
|
December, 2019
|
-
|
Indigenous
|
|
|
IS 14919 : 2001 ISO 4001 Reviewed In : 2022 |
Inland vessels - Raft - Type life - Saving apparatus - General requirements
|
February, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 16183 (Part 1) : 2023 ISO 12215-1:2000 |
Small craft - Hull construction and scantlings Part 1 Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate
|
-
|
Identical under dual numbering
|
||
|
IS 16183 (Part 2) : 2015 ISO 12215-2 : 2002 Reviewed In : 2020 |
Small craft - Hull construction and scantlings: Part 2 materials : core materials for sandwich construction, embedded materials
|
July, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 16183 (Part 3) : 2014 ISO 12215-3 : 2002 Reviewed In : 2019 |
Small craft - Hull construction and scantlings: Part 3 materials : steel, aluminium alloys, wood, other materials
|
May, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 16183 (Part 4) : 2020 ISO 12215-4 : 2002 |
Small Craft — Hull Construction and Scantlings Part 4 Workshop and Manufacturing
|
-
|
Identical under dual numbering
|
||
|
IS 16183 (Part 6) : 2020 ISO 12215-6 : 2008 |
Small Craft — Hull Construction and Scantlings Part 6 Structural Arrangements and Details
|
-
|
Identical under dual numbering
|
||
|
IS 16183 (Part 8) : 2020 ISO 12215-8 : 2009 |
Small Craft — Hull Construction and Scantlings Part 8 Rudders
|
-
|
Identical under dual numbering
|
||
|
IS 16183 (Part 9) : 2020 ISO 12215-9 : 2012 |
Small craft — Hull construction and scantlings Part 9 Sailing Craft Appendages
|
-
|
Identical under dual numbering
|
||
|
IS 17469 : 2024 ISO 8666:2020 |
Small Craft — Principal Data (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 17469 : 2020 ISO 8666 : 2016 |
Small Craft — Principal Data
|
-
|
Identical under dual numbering
|
||
|
IS 17470 : 2024 ISO 9094:2022 |
Small Craft — Fire Protection (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 17470 : 2020 ISO 9094 : 2015 |
Small Craft - Fire Protection
|
-
|
Identical under dual numbering
|
||
|
IS 17471 : 2024 ISO 21487: 2022 |
Small Craft — Permanently Installed Petrol and Diesel Fuel Tank (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 17471 : 2020 ISO 21487 : 2012 |
Small Craft - Permanently Installed Petrol and Diesel Fuel Tanks
|
-
|
Identical under dual numbering
|
||
|
: 2024 ISO 12217-1:2022 |
Small craft - Stability and buoyancy assessment and categorization Part 1: Non-sailing boats of hull length greater than or equal to 6 m
|
-
|
Identical under dual numbering
|
||
|
: 2024 ISO 12217-2:2022 |
Small Craft — Stability and Buoyancy Assessment and Categorization Part 2 Sailing Boats of Hull Length Greater Than or Equal to 6 m (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 17884 (Part 2) : 2022 ISO 12217-2:2015 |
Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m
|
-
|
Identical under dual numbering
|
||
|
: 2024 ISO 12217-3:2022 |
Small Craft — Stability and Buoyancy Assessment and Categorization Part 3 Boats of Hull Length Less than 6 m (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 17952 (Part 1) : 2022 ISO 6185-1:2001 |
Inflatable boats - Part 1: Boats with a maximum motor power rating of 4.5 kW
|
-
|
Identical under dual numbering
|
||
|
IS 17952 (Part 2) : 2022 ISO 6185-2:2001 |
Inflatable boats Part 2: Boats with a maximum motor power rating of 4.5 kW to 15 kW inclusive
|
-
|
Identical under dual numbering
|
||
|
IS 17952 (Part 3) : 2022 ISO 6185-3:2014 |
Inflatable boats Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater
|
-
|
Identical under dual numbering
|
||
|
IS 4647 : 1998 Reviewed In : 2018 |
Inland vessels - Detachable steel ladder - Specification (First Revision)
|
July, 2018
|
-
|
Indigenous
|
|
|
IS 4659 : 1980 ISO 3652 Reviewed In : 2023 |
Specification for wire rope reel for inland vessels (First Revision)
|
March, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 4690 : 2013 Reviewed In : 2023 |
Buoy shackles - Specification (First Revision)
|
September, 2023
|
-
|
Indigenous
|
|
|
IS 5269 : 1987 Reviewed In : 2018 |
Specification for access hatches for inland vessels (First Revision)
|
November, 2018
|
-
|
Indigenous
|
|
|
IS 7046 : 1993 Reviewed In : 2023 |
Inland vessels - Harbour tugs - Guide for selection (First Revision)
|
March, 2023
|
-
|
Indigenous
|
|
|
IS 7048 : 2006 ISO 5778 Reviewed In : 2022 |
Ships and marine technology - Small weathertight steel hatches (Second Revision)
|
February, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 7363 : 1993 Reviewed In : 2023 |
Inland vessels - Tests and trials for harbour tugs (FIrst Revision)
|
March, 2023
|
-
|
Indigenous
|
|
|
IS 7595 (Part 1) : 1975 Reviewed In : 2022 |
General requirements for otter boards: Part 1 flat rectangular otter boards
|
February, 2022
|
1
|
Indigenous
|
|
|
IS 7595 (Part 1) : 2024 |
Otter Boards — General Requirements Part 1 Flat Rectangular Otter Boards (first revision)
|
-
|
Indigenous
|
||
|
IS 7595 (Part 2) : 2024 |
Otter Boards — General Requirements Part 2 Rectangular Horizontally Curved Otter Boards (First Revision)
|
-
|
Indigenous
|
||
|
IS 7595 (Part 2) : 1976 Reviewed In : 2022 |
General requirements for otter boards: Part 2 rectangular horizontally curved otter boards
|
February, 2022
|
-
|
Indigenous
|
|
|
IS 7595 (Part 3) : 2024 |
Otter Boards — General Requirements Part 3 Oval Otter Boards (first revision)
|
-
|
Indigenous
|
||
|
IS 7595 (Part 3) : 1977 Reviewed In : 2022 |
General requirements for otter boards: Part 3 oval otter boards
|
February, 2022
|
-
|
Indigenous
|
|
|
IS 7595 (Part 4) : 2024 |
Otter Boards — General Requirements Part 4 Application Standard (first revision)
|
-
|
Indigenous
|
||
|
IS 7595 (Part 4) : 1986 Reviewed In : 2022 |
General requirements for otter boards: Part 4 application standard
|
February, 2022
|
-
|
Indigenous
|
|
|
IS 7595 (Part 5) : 2024 |
OTTER BOARDS — GENERAL REQUIREMENTS PART 5 VEE TYPE OTTER BOARDS (first revision)
|
-
|
Indigenous
|
||
|
IS 7595 (Part 5) : 1991 Reviewed In : 2022 |
Fishing vessels - Otter boards: Part 5 vee type otter boards
|
February, 2022
|
-
|
Indigenous
|
|
|
IS 7595 (Part 6) : 2024 |
Otter Boards — General Requirements Part 6 Guidelines for selection of Fishing vessels (first revision)
|
-
|
Indigenous
|
||
|
IS 7595 (Part 6) : 1991 Reviewed In : 2022 |
Fishing vesseli - otter boards Part 6 guidelines for selection
|
February, 2022
|
-
|
Indigenous
|
|
|
IS 8013 : 1985 Reviewed In : 2021 |
Specification for performance requirements and testing of marine diesel engines for fishing vessels (First Revision)
|
January, 2021
|
-
|
Indigenous
|
|
|
IS 8373 (Part 1) : 1991 Reviewed In : 2022 |
Steel launches - Specification: Part 1 single hull passenger ferry launches (First Revision)
|
February, 2022
|
-
|
Indigenous
|
|
|
IS 8509 (Part 1) : 1977 Reviewed In : 2023 |
Code of practice for tests and trials of dredgers: Part 1 self - Propelled trai - Ling hopper suction dredgers
|
March, 2023
|
-
|
Indigenous
|
|
|
IS 8820 (Part 1) : 1978 Reviewed In : 2021 |
Specification for towing hooks: Part 1 scale of tractive efforts
|
January, 2021
|
-
|
Indigenous
|
|
|
IS 8820 (Part 1) : 2024 |
Towing Hooks Part 1 Scale of Tractive Efforts (first revision)
|
-
|
Indigenous
|
||
|
IS 9496 (Part 1) : 1980 Reviewed In : 2022 |
Specification for fishing floats: Part 1 aluminium alloy and glass floats
|
February, 2022
|
-
|
Indigenous
|
|
|
IS 9860 (Part 1) : 1981 Reviewed In : 2022 |
Specification for fishing hooks: Part 1 barbed hooks
|
February, 2022
|
-
|
Indigenous
|
|
|
IS 9871 : 1993 Reviewed In : 2018 |
Inland vessels - Wooden hatch covers - Specification (First Revision)
|
October, 2018
|
-
|
Indigenous
|
|
|
IS 9882 (Part 1) : 1981 ISO 4089 Reviewed In : 2023 |
Specification for sealing rubber for covers for cargo hatches: Part 1 dry cargo hatches
|
March, 2023
|
-
|
Identical under dual numbering
|
|
TED 18 (24407)
Revision of: IS 10868:1984 |
DATA SHEET FOR REVERSE DIRECT REDUCTION GEAR BOX FOR FISHING VESSELS |
| No Records Found |
| No Records Found |
|
TED 18 (23620)
Revision of: IS 10854:1984 |
CUTTER SUCTION DREDGE COMPONENT - SPECIFICATION PART 1 CUTTER |
|
|
TED 18 (23640)
Revision of: IS 10854:1984 |
Cutter Suction Dredge Component - Specification Part 2 Suction pipe |
|
|
TED 18 (23644)
Revision of: IS 10854:1984 |
Cutter Suction Dredge Component - Specification Part 3 Ladder |
|
|
TED 18 (23656)
Revision of: IS 10854:1984 |
CUTTER SUCTION DREDGE COMPONENTS SPECIFICATION PART 4 SPUD |
|
|
TED 18 (23660)
Revision of: IS 10854:1993 |
CUTTER SUCTION DREDGE COMPONENTS SPECIFICATION PART 5 Cast Spud Point |
|
|
TED 18 (23664)
Revision of: IS 10854:1993 |
CUTTER SUCTION DREDGE COMPONENTS SPECIFICATION PART 6 Cast Spud Cylinder |
TED 18 (21883)
Revision of: IS 9496:1980 |
Plastic Fishing Floats - Specification First Revision |
|
TED 18 (21060)
Revision of: IS 10199:1982 |
ACCEPTANCE TESTS AND TRIALS FOR FISHING VESSELS | |
|
TED 18 (21120)
Revision of: IS 11474:1985 |
Power operated windlasses and anchor capstans For inland vessels General requirements |
|
|
IS 11341 : 1985 ISO 41 |
Covers for Deck Openings for Pumps for Inland Vessels |
|
|
IS 12993 : 1991 ISO 3876 |
Inland vessels - Hand-holes s |
|
|
IS 14623 : 1998 ISO 3372 |
Inland Vessels - Mushroom-type Ventilator Heads |
|
|
IS 8819 (Part 1) : 1978 Reviewed In : 1994 |
Hold loading steel dumb barges Part 1 Capacity and dimensions |
|
|
IS 8821 (Part 1) : 1978 Reviewed In : 2016 |
Steering Gear - Part I Values of Torques |
|
|
IS 8821 (Part 2) : 1982 Reviewed In : 2013 |
Steering Gear - Part II Hand Hydraulic Steering Gear |
|
|
IS 8821 (Part 3) : 1990 Reviewed In : 2016 |
Inland vessels - steering gear Part 3 Method of shop testing |
|
|
IS 8848 : 1978 Reviewed In : 2009 |
Rope Tubs |
|
|
IS 8950 : 1993 Reviewed In : 2013 |
Inland vessels - Harbour tugs - General reuirements |
|
IS 10227 : 1997 ISO 6115 Reviewed In : 2023 |
Fishing vessels - Trawl winches - Specification First Revision |
|
|
IS 10530 : 1983 Reviewed In : 2023 |
Guidelines for selection of fish hold insulation |
|
|
IS 10854 (Part 1) : 1984 Reviewed In : 2021 |
Specification - For cutter suction dredge components Part 1 cutter |
|
|
IS 10854 (Part 2) : 1984 Reviewed In : 2021 |
Spew ication for cutter suction dredge components Part 2 suction pipe |
|
|
IS 10854 (Part 3) : 1984 Reviewed In : 2021 |
Specification for cutter suction dredge components Part 3 ladder |
|
|
IS 10854 (Part 4) : 1984 Reviewed In : 2023 |
Specification for cutter suction dredge components Part 4 spuds |
|
|
IS 10854 (Part 5) : 1993 Reviewed In : 2023 |
Inlandvessels - Cutter suction dredge components Part 5 cast spud point - General requirements |
|
|
IS 10854 (Part 6) : 1993 Reviewed In : 2023 |
Inland vessels - Cutter suction dredge components Part 6 cast spud cylinder - General requirements |
|
|
IS 10855 : 1984 ISO 7607 Reviewed In : 2018 |
Specification for bucket capacities for multi - Bucket dredgers |
|
|
IS 10862 : 1984 Reviewed In : 2021 |
Classification and basic requirements of pilot craft |
|
|
IS 10868 : 1984 Reviewed In : 2018 |
Data sheet for reverse direct reduction gear box for fishing vessels |
|
|
IS 11253 : 1985 ISO 4085 Reviewed In : 2021 |
Specification for swing derricks |
|
|
IS 11693 : 2006 ISO 21 Reviewed In : 2022 |
ShmwjiLdiNg - Inland navigation - Cable - Lifters for stud - Link anchor chains First Revision |
|
|
IS 11694 (Part 1) : 1986 ISO 7545 Reviewed In : 2022 |
Specification for single - Lock automatic couplings for push tows for inland navigation Part 1 general requirements |
|
|
IS 11694 (Part 2) : 1986 ISO 7545 Reviewed In : 2022 |
Specification for single - Lock automatic couplings for push tows for inland navigation Part 2 type a couplings |
|
|
IS 11694 (Part 3) : 1986 ISO 7545 Reviewed In : 2022 |
Specification for single - Lock automatic couplings for push tows for inland navigation Part 3 type 6 couplings |
|
|
IS 11823 (Part 1) : 1986 ISO 7608 Reviewed In : 2022 |
Specification for couplings for disposal of oily mixture for inland vessels Part 1 flange couplings |
|
|
IS 11823 (Part 2) : 1986 ISO 7608 Reviewed In : 2022 |
Specification for couplings for disposal of oily mixture for inland vessels Part 2 quick release couplings |
|
|
IS 11823 (Part 3) : 1986 ISO 7608 Reviewed In : 2022 |
Specification for couplings for disposal of oily mixture for inland vessels Part 3 adapters Flange end Piece |
|
|
IS 11823 (Part 4) : 1986 ISO 7608 Reviewed In : 2022 |
Specification - For couplings for disposal of oily mixtures for inland vessels Part 4 adapters Flange bush |
|
|
IS 12115 (Part 1) : 1987 ISO 7608 Reviewed In : 2018 |
Specification for couplings for disposal of sewage water for inland vessels Part 1 flange coupling |
|
|
IS 12115 (Part 2) : 1987 ISO 7608 Reviewed In : 2018 |
Specification for couplings for disposal of sewage water for inland vessels Part 2 quick - Release couplings |
|
|
IS 12115 (Part 3) : 1987 ISO 7608 Reviewed In : 2018 |
Specification for couplings for disposal of sewage water for inland vessels Part 3 adapters Flange end Piece |
|
|
IS 12115 (Part 4) : 1987 ISO 7608 Reviewed In : 2018 |
Specification for couplings for disposal of sewage water for inland vessels Part 4 adapters Flange bush |
|
|
IS 12963 : 1990 Reviewed In : 2021 |
Inland vessels - Dredgers - Floaters - Specification |
|
|
IS 13004 (Part 1) : 1990 ISO 4127-1 Reviewed In : 2021 |
Inland vessels - Fairleads - Specification Part 1 two - Lip fairleads |
|
|
IS 13004 (Part 2) : 1990 ISO 4127-2 Reviewed In : 2021 |
Inland vessels - Fairleads - Specification Part 2 roller fairleads |
|
|
IS 13848 : 1993 Reviewed In : 2023 |
Inland vessels - Rubber fenders - Specification |
|
|
IS 14171 : 1994 Reviewed In : 2018 |
Inland vessels - Bellows for dredgers - Specification |
|
|
IS 14449 : 1997 ISO 7606 Reviewed In : 2023 |
Inland vessels - Draught scale - Specification |
|
|
IS 14646 : 1999 Reviewed In : 2018 |
Shipbuilding - Mooring buoy - Specification |
|
|
IS 14919 : 2001 ISO 4001 Reviewed In : 2022 |
Inland vessels - Raft - Type life - Saving apparatus - General requirements |
|
|
IS 16183 (Part 2) : 2015 ISO 12215-2 : 2002 Reviewed In : 2020 |
Small craft - Hull construction and scantlings Part 2 materials core materials for sandwich construction embedded materials |
|
|
IS 16183 (Part 3) : 2014 ISO 12215-3 : 2002 Reviewed In : 2019 |
Small craft - Hull construction and scantlings Part 3 materials steel aluminium alloys wood other materials |
|
|
IS 16183 (Part 4) : 2020 ISO 12215-4 : 2002 |
Small Craft Hull Construction and Scantlings Part 4 Workshop and Manufacturing |
|
|
IS 16183 (Part 6) : 2020 ISO 12215-6 : 2008 |
Small Craft Hull Construction and Scantlings Part 6 Structural Arrangements and Details |
|
|
IS 16183 (Part 8) : 2020 ISO 12215-8 : 2009 |
Small Craft Hull Construction and Scantlings Part 8 Rudders |
|
|
IS 16183 (Part 9) : 2020 ISO 12215-9 : 2012 |
Small craft Hull construction and scantlings Part 9 Sailing Craft Appendages |
|
|
IS 17471 : 2024 ISO 21487: 2022 |
Small Craft Permanently Installed Petrol and Diesel Fuel Tank First Revision |
|
|
IS 17952 (Part 1) : 2022 ISO 6185-1:2001 |
Inflatable boats - Part 1 Boats with a maximum motor power rating of 4 5 kW |
|
|
IS 17952 (Part 2) : 2022 ISO 6185-2:2001 |
Inflatable boats Part 2 Boats with a maximum motor power rating of 4 5 kW to 15 kW inclusive |
|
|
IS 17952 (Part 3) : 2022 ISO 6185-3:2014 |
Inflatable boats Part 3 Boats with a hull length less than 8 m with a motor rating of 15 kW and greater |
|
|
IS 4647 : 1998 Reviewed In : 2018 |
Inland vessels - Detachable steel ladder - Specification First Revision |
|
|
IS 4659 : 1980 ISO 3652 Reviewed In : 2023 |
Specification for wire rope reel for inland vessels First Revision |
|
|
IS 4690 : 2013 Reviewed In : 2023 |
Buoy shackles - Specification First Revision |
|
|
IS 5269 : 1987 Reviewed In : 2018 |
Specification for access hatches for inland vessels First Revision |
|
|
IS 7046 : 1993 Reviewed In : 2023 |
Inland vessels - Harbour tugs - Guide for selection First Revision |
|
|
IS 7048 : 2006 ISO 5778 Reviewed In : 2022 |
Ships and marine technology - Small weathertight steel hatches Second Revision |
|
|
IS 8013 : 1985 Reviewed In : 2021 |
Specification for performance requirements and testing of marine diesel engines for fishing vessels First Revision |
|
|
IS 8373 (Part 1) : 1991 Reviewed In : 2022 |
Steel launches - Specification Part 1 single hull passenger ferry launches First Revision |
|
|
IS 9496 (Part 1) : 1980 Reviewed In : 2022 |
Specification for fishing floats Part 1 aluminium alloy and glass floats |
|
|
IS 9860 (Part 1) : 1981 Reviewed In : 2022 |
Specification for fishing hooks Part 1 barbed hooks |
|
|
IS 9871 : 1993 Reviewed In : 2018 |
Inland vessels - Wooden hatch covers - Specification First Revision |
|
|
IS 9882 (Part 1) : 1981 ISO 4089 Reviewed In : 2023 |
Specification for sealing rubber for covers for cargo hatches Part 1 dry cargo hatches |