BUREAU OF INDIAN STANDARDS
Programme of Work
TED14 : Air and Space Vehicles Sectional Committee
- Scope : a) Standardization of systems, accessories, fittings, test method, performance requirements of aircraft, and space vehicles, aircraft electrical and allied equipment, air cargo handling and specialized ground handling equipment. b) Co-ordination of work with ISO/TC 20 & its sub-committees ISO/TC 20/SC 1, ISO/TC 20/SC 4, ISO/TC 20/SC 6, ISO/TC 20/SC 8, ISO/TC 20/SC 9, ISO/TC 20/SC 10, ISO/TC 20/SC 13 and ISO/TC 20/SC 14, c) Co-ordination of work with ISO/TC 31 and its relevant subcommittee ISO/TC 31/SC 8, d) Co-ordination of work with ISO/TC 192.
-
Liaison :ISO/TC 192 - Gas turbines - Participating (P)
ISO/TC 20 - Aircraft and space vehicles - Participating (P)
ISO/TC 20/SC 1 - Aerospace electrical requirements - Participating (P)
ISO/TC 20/SC 10 - Aerospace fluid systems and components - Participating (P)
ISO/TC 20/SC 13 - Space data and information transfer systems - Participating (P)
ISO/TC 20/SC 14 - Space systems and operations - Participating (P)
ISO/TC 20/SC 4 - Aerospace fastener systems - Participating (P)
ISO/TC 20/SC 6 - Standard atmosphere - Participating (P)
ISO/TC 20/SC 8 - Aerospace terminology - Participating (P)
ISO/TC 20/SC 9 - Air cargo and ground equipment - Participating (P)
ISO TC 31 - Tyre, Rims and Valves - Participating (P)
|
IS 10041 : 1981 Reviewed In : 2021 |
Glossary of terms for airline technical operations
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 10195 : 1982 Reviewed In : 2019 Reaffirmed but not taken up for revision |
General requirements for insulated air cargo containers
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 10196 : 1982 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Guidelines for transportation of dead body and cremated remains of human beings by air
|
April, 2018
|
-
|
Indigenous
|
|
|
IS 10237 : 1982 Reviewed In : 2021 |
Specification for DC motors for aircraft
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 10240 : 1982 Reviewed In : 2021 |
General requirements for electrical equipment for aircraft
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 10241 (Part 1) : 1982 Reviewed In : 2021 |
Specification for electrical cables for aircraft: Part 1 general requirements and tests
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 10241 (Part 2) : 1982 Reviewed In : 2021 |
Specification for electrical cables for aircraft: Part 2 pren type electric cables
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 10241 (Part 3) : 1987 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for electric cables for aircraft: Part 3 nyvin type electric cables
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 10494 (Part 1) : 2012 ISO 6966_1 Reviewed In : 2022 |
Aircraft ground equipment - Basic requirements: Part 1 general design requirements (First Revision)
|
March, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 10494 (Part 2) : 2023 ISO 6966-2-2005 |
Aircraft ground equipment - Basic requirements: Part 2 safety requirements First Revision
|
-
|
Identical under dual numbering
|
||
|
IS 10515 : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision |
General requirements of main deck container/pallet loader for aircraft
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 10610 : 1983 ISO 11 Reviewed In : 2021 |
Aircraft pressure cabin ground test connections
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 10628 : 1983 Reviewed In : 2021 |
General requirements for aerospace bolts and nuts
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 10682 : 1983 Reviewed In : 2021 |
Specification for aircraft safety belts, lap type
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 10869 (Part 1) : 1984 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for igloo: Part 1 non - Structural igloo
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 10869 (Part 2) : 1984 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for igloo: Part 2 structural igloo assembly
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 10965 : 1984 Reviewed In : 2021 |
Specification for valves for aircraft tyre tubes
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 10966 : 1984 Reviewed In : 2022 |
Dimensions of valve stem of aircraft tyre tube valves
|
January, 2022
|
-
|
Indigenous
|
|
|
IS 10980 (Part 1) : 2014 ISO 5855-1 : 1999 Reviewed In : 2019 |
Aerospace - MJ threads: Part 1 general requirements (First Revision)
|
July, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 10980 (Part 2) : 2014 ISO 5855-2 : 1999 Reviewed In : 2019 |
Aerospace - MJ threads: Part 2 limit dimensions for bolts and nuts (First Revision)
|
November, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 10980 (Part 3) : 2014 ISO 5855-3:1999 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Aerospace - MJ threads: Part 3 limit dimensions for fittings for fluid systems (First Revision)
|
February, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 10992 (Part 1) : 2003 ISO 3324-1 Reviewed In : 2023 Reaffirmed but not taken up for revision |
Aircraft tyres and: Part 1 specifications (First Revision)
|
April, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 10992 (Part 2) : 2003 ISO 3324-2 Reviewed In : 2023 Reaffirmed but not taken up for revision |
Aircraft tyres and rims: Part 2 test methods for tyres (First Revision)
|
April, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 11165 : 1985 Reviewed In : 2021 |
Specification for aircraft seat rails and pins
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 11167 : 2011 ISO 6968 : 2005 Reviewed In : 2021 |
Aircraft ground equipment - Lower deck loader - Functional requirements (Second Revision)
|
December, 2021
|
-
|
Indigenous
|
|
|
IS 11436 : 1985 Reviewed In : 2021 |
General requirements for ground handling and transport systems equipment for air cargo unit load devices
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 11437 : 1985 Reviewed In : 2021 |
Ground equipment requirement for compatibility with aircraft unit load devices
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 11438 : 1985 Reviewed In : 2021 |
Functional requirements for air cargo unit load devices transport vehicle (UTV)
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 11499 : 1996 ISO 4117 Reviewed In : 2021 |
Air and air/land ,cargo pallets - Specification and testing (First Revision)
|
March, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 11517 : 1985 Reviewed In : 2022 |
Methods of test for air and air - Land cargo pallets
|
January, 2022
|
-
|
Indigenous
|
|
|
IS 11553 : 2011 Reviewed In : 2023 |
Air cargo equipment - Air/land pallet nets (First Revision)
|
July, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 11554 : 1986 Reviewed In : 2021 |
Methods of test for air - Land cargo pallet nets
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 11642 (Part 1) : 1986 Reviewed In : 2022 |
Specification for aluminium hexagonal honeycomb core: Part 1 general requirements
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 11642 (Part 2) : 1986 Reviewed In : 2022 |
Specification for aluminium hexagonal honeycomb core: Part 2 methods of tests
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 11644 : 1999 Reviewed In : 2023 |
Tolerances of form and position for aerospace bolts and screws (First Revision)
|
December, 2023
|
-
|
Modified/Technically Equivalent
|
|
|
IS 11649 (Part 1) : 1986 Reviewed In : 2022 |
Specification for aluminium honeycomb sandwich panel for civil aircraft floors: Part 1 general design criteria
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 11649 (Part 2) : 1986 Reviewed In : 2022 |
Specification for aluminium honeycomb sandwich panels for civil aircraft floors: Part 2 methods of tests
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 11680 : 1986 Reviewed In : 2022 |
Specification for hexagonal slotted (Castellated) nuts (MJ Series)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 11715 (Part 1) : 2024 ISO 3353 : Part 1 : 2020 |
Aerospace — Lead and Runout Threads Part 1 Rolled External Threads (Second Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 11715 (Part 1) : 2011 Reviewed In : 2022 |
Aerospace - Lead and runout threads: Part 1 rolled external threads (First Revision)
|
March, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 11715 (Part 2) : 2012 ISO 3353_2 : 2002 Reviewed In : 2022 |
Aerospace - Lead and runout threads: Part 2 internal threads (First Revision)
|
March, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 11715 (Part 2) : 2024 ISO 3353-2:2020 |
Aerospace — Lead and Runout Threads Part 2 Internal Threads (Second Revision)
|
-
|
Identical under dual numbering
|
||
|
IS/ISO 11893 : 2011 ISO 11893 : 2011 Reviewed In : 2021 |
Space Systems — Programme Management — Project Organization
|
March, 2021
|
-
|
Identical under single numbering
|
|
|
IS 11903 : 1986 Reviewed In : 2022 |
Specification for caps for aircraft tyre tube valves
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 12043 (Part 1) : 1987 Reviewed In : 2019 |
Specification for electrical connectors for aircraft: Part 1 general requirements
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 12043 (Part 2) : 1987 Reviewed In : 2019 |
Specification for electrical connectors for aircraft: Part 2 tests
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 12044 : 1987 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for mechanically operated switches for use in aircrafts
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 12462 : 1988 ISO 6965 Reviewed In : 2023 Decision taken to Reaffirm and Archive |
Functional requirements for self - Propelled gantry for lifting air cargo containers and outsize cargoes
|
November, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 12524 : 1988 Reviewed In : 2019 Reaffirmed but not taken up for revision |
General requirements for main deck baggage container loader
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 12545 : 1988 Reviewed In : 2019 |
Methodology of calculating aircraft cargo volumes
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 12546 : 1988 Reviewed In : 2019 |
Basic safety requirements for air cargo loading equipment
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 12559 : 1989 Reviewed In : 2019 Reaffirmed but not taken up for revision |
General requirements for self - Propelled conveyor - Belt loader
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 12603 : 1988 Reviewed In : 2023 Decision taken to Reaffirm and Archive |
General requirements for future wide - Body aircraft cargo - Systems and compartments - (Intermodal)
|
December, 2023
|
-
|
Indigenous
|
|
|
IS 12678 : 1989 Reviewed In : 2019 |
Aerospace - Ground equipment - Graphical symbols for operators
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 12842 : 1989 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Tie - Down fittings - Aircraft net assemblies - Specification
|
February, 2019
|
-
|
Indigenous
|
|
|
IS 12863 : 1989 Reviewed In : 2019 |
Symbols for the pictorial standardization of aircraft cargo K handling systems for unit load devices (ULDs)
|
February, 2019
|
-
|
Indigenous
|
|
|
IS 13153 : 1991 Reviewed In : 2022 |
Aerospace plain hexagon nuts (MJ Series) strength classification 1100 mpa maximum operating temperature 235°C - Specification
|
March, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 13153 : 2024 ISO 8279:2008 |
Aerospace — Nuts, Hexagonal, Plain, Normal Height, Normal Across Flats, with MJ Threads, Classifications: 600 Mpa (at Ambient Temperature)/120 ºC, 600 Mpa (at Ambient Temperature)/235 ºC, 900 Mpa (at Ambient Temperature)/425 ºC, 1 100 Mpa (at Ambient Temperature)/235 ºC, 1 100 Mpa (at Ambient Temperature)/315 ºC, 1 100 Mpa (at Ambient Temperature)/650 ºC, 1 210 Mpa (at Ambient Temperature)/730 ºC, 1 250 Mpa (at Ambient Temperature)/235 ºC And 1 550 Mpa (at Ambient Temperature)/600 ºC — Dimensions ( First Revision )
|
-
|
Identical under dual numbering
|
||
|
IS 13259 : 1992 ISO 7717 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Aircrafttow tractors - Performance requirements
|
April, 2018
|
-
|
Identical under dual numbering
|
|
|
IS 13269 : 1991 ISO 3282 Reviewed In : 2022 |
Aircraft - Single - Hole and triple - Hole mounting (Class 3) liever - Operated manual switches - Dimensions
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 13283 : 2024 ISO 7995:2002 |
Aerospace — Nuts, Hexagonal, Self-locking, with MJ Threads, Classification 1 100 MPa (at Ambient Temperature)/235 °C, 1 100 MPa (at Ambient Temperature)/315 °C and 1 100 MPa (at Ambient Temperature)/425 °C — Dimensions (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 13296 : 1992 ISO 3456 Reviewed In : 2022 |
Aircraft - Performance requirements for lever operated manual switches (Class 3) - Specification
|
March, 2022
|
-
|
Modified/Technically Equivalent
|
|
|
IS 13309 : 1992 ISO 1466 Reviewed In : 2022 |
Aircraft - Performance requirements for lever operated manual switches (Class 1 And 2) - Specification
|
March, 2022
|
-
|
Modified/Technically Equivalent
|
|
|
IS 13835 (Part 1) : 2011 ISO 461-1 : 2003 Reviewed In : 2022 |
Aircraft - Connectors for ground electrical supplies: Part 1 design, performance and test requirements (First Revision)
|
March, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 13835 (Part 2) : 2012 ISO 461-2:1985 Reviewed In : 2022 |
Aircraft - Connectors for ground electrical supplies: Part 2 dimensions (First Revision)
|
March, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 13908 : 1993 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Aircraft unit load devices - Loading and securing cargo - Guidelines
|
February, 2019
|
1
|
Indigenous
|
|
|
IS 13932 : 1994 ISO 2574 Reviewed In : 2021 |
Aircraft - Electrical cables - Identification marking
|
March, 2021
|
-
|
Modified/Technically Equivalent
|
|
|
IS 14388 : 1996 Reviewed In : 2022 |
Aircraft - Lower - Deck turn table container - Dolley functional requirements
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 14389 : 1996 Reviewed In : 2022 |
Aircraft - Pallet dolley - Functional requirements
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 14431 : 1997 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Airport passenger bus - Functional requirements
|
February, 2019
|
-
|
Indigenous
|
|
|
IS 14432 : 1997 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Air craft - Ambulift - Functional requirements
|
February, 2019
|
-
|
Indigenous
|
|
|
IS 14547 : 1998 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Aircraft - Electrical cables and cable harnesses - Terminology
|
April, 2018
|
-
|
Indigenous
|
|
|
IS 14548 : 1998 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Aircraft - Standby magnetic compass - Specification
|
April, 2018
|
-
|
Indigenous
|
|
|
IS 14576 : 1998 ISO 12056 Reviewed In : 2023 |
Aircraft - Self - Propelled passenger stairs for large capacity aircraft - Functional requirements
|
December, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 14751 : 1999 ISO 11086 Reviewed In : 2021 |
Gas turbines - Vocabulary
|
March, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 14790 : 2000 ISO 10841 Reviewed In : 2021 |
Aircraft - Catering vehicle for large capacity aircraft - Functional requirements
|
March, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 14798 : 2000 ISO 3168 Reviewed In : 2021 |
Aerospace - Self - Locking, fixed, single - Lug anchor nuts with counterbore, classification 1100 mpa/235 degree C - Specification
|
March, 2021
|
-
|
Modified/Technically Equivalent
|
|
|
IS 14799 : 2000 Reviewed In : 2021 |
Aerospace - Nuts, anchor, self - Locking, floating two - Lug, with counterbore with mj threads, coated or uncoated, classification 1100 mpa/235"C, 1100 mpa/315"C and 1 100 mpal425"C - Specification
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 14824 : 2000 ISO 3191 Reviewed In : 2021 |
Aerospace - Self - Locking, fixed, single - Lug anchor nuts, reduced series, with counterbore, with MJ threads, strength classification 1100 mpa/235° C - Specification
|
March, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 15192 : 2024 ISO 8788:2020 |
Aerospace — Nuts, Metric — Tolerances of Form and Position (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 15293 : 2003 ISO 5858 Reviewed In : 2023 |
Aerospace - Nuts, self - Locking, with maximum operating temperature less than or equal to 425°C - Procurement specification
|
July, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15308 : 2003 ISO 13596 Reviewed In : 2023 |
Aerospace - Inserts, self - Locking with MJ threads, closed type, in metallic material, coated or uncoated - Dimensions
|
July, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15428 : 2004 Reviewed In : 2021 |
Retreading of radial/cross ply tyres for aircraft - Specification
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 15437 : 2024 ISO 5856:2008 |
Aerospace � Screws, 100 Degrees Normal Countersunk Head, Internal Offset Cruciform Ribbed or Unribbed Drive, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1 100 Mpa � Dimensions
|
-
|
Identical under dual numbering
|
||
|
IS 15437 : 2003 ISO 5856 Reviewed In : 2019 |
Aerospace - Screws, 100° normal countersunk head, internal offset cruciform ribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 mpa - Dimensions
|
February, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 15469 : 2024 ISO 3185:2021 |
Aerospace — Bolts, Normal Bihexagonal Heads, Normal Shank, Short or Medium Length MJ Threads, Metallic Material, Coated or Uncoated, Strength Classes Less Than or Equal to 1 100 MPa — Dimensions (Second Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 15471 : 2012 ISO 8641 : 2008 Reviewed In : 2023 |
Aerospace - Self - Locking nuts with maximum operating temperature greater than 425°C - Procurement specification (First Revision)
|
July, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 16000 : 2004 Reviewed In : 2021 |
Aerospace quality management systems - Requirements
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 17095 : 2019 ISO 16682 : 2015 Reaffirmed but not taken up for revision |
Aerospace series - Terminology for clamping devices
|
-
|
Identical under dual numbering
|
||
|
IS 17096 : 2019 ISO 10254 : 2016 Reaffirmed but not taken up for revision |
Air Cargo and Ground Equipment — Vocabulary
|
-
|
Identical under dual numbering
|
||
|
IS 18326 : 2023 ISO 10794: 2018 |
SPACE SYSTEMS PROGRAMME MANAGEMENT MATERIAL MECHANICAL PARTS AND PROCESSES
|
-
|
Identical under dual numbering
|
||
|
IS 18327 (Part 2) : 2023 ISO 14300-2:2011 |
SPACE SYSTEMS PROGRAMME MANAGEMENT PART 2: PRODUCT ASSURANCE
|
-
|
Identical under dual numbering
|
||
|
IS 18328 (Part 1) : 2023 ISO 14620-1: 2018 |
SPACE SYSTEMS SAFETY REQUIREMENTS PART 1: SYSTEM SAFETY
|
-
|
Identical under dual numbering
|
||
|
IS 18329 (Part 1) : 2023 ISO 14621-1:2019 |
SPACE SYSTEMS ELECTRICAL ELECTRONIC AND ELECTROMECHANICAL EEE PARTS PART 1: PARTS MANAGEMENT
|
-
|
Identical under dual numbering
|
||
|
IS 18329 (Part 2) : 2023 ISO 14621-2:2019 |
SPACE SYSTEMS ELECTRICAL ELECTRONIC AND ELECTROMECHANICAL EEE PARTS PART 2: CONTROL PROGRAMME REQUIREMENTS
|
-
|
Identical under dual numbering
|
||
|
IS 18330 : 2023 ISO 16290: 2013 |
SPACE SYSTEMS DEFINITION OF THE TECHNOLOGY READINESS LEVELS TRLS AND THEIR CRITERIA OF ASSESSMENT
|
-
|
Identical under dual numbering
|
||
|
IS 18331 : 2023 ISO 10789: 2011 |
SPACE SYSTEMS PROGRAMME MANAGEMENT INFORMATION AND DOCUMENTATION MANAGEMENT
|
-
|
Identical under dual numbering
|
||
|
IS 18333 : 2023 ISO 21351: 2005 |
SPACE SYSTEMS FUNCTIONAL AND TECHNICAL SPECIFICATIONS
|
-
|
Identical under dual numbering
|
||
|
IS 18334 : 2023 ISO 23460: 2011 |
SPACE PROJECTS PROGRAMME MANAGEMENT DEPENDABILITY ASSURANCE REQUIREMENTS
|
-
|
Identical under dual numbering
|
||
|
IS 18335 : 2023 ISO 23461: 2010 |
SPACE SYSTEMS PROGRAMME MANAGEMENT NON-CONFORMANCE CONTROL SYSTEM
|
-
|
Identical under dual numbering
|
||
|
IS 18336 : 2023 ISO 27025: 2010 |
SPACE SYSTEMS PROGRAMME MANAGEMENT QUALITY ASSURANCE REQUIREMENTS
|
-
|
Identical under dual numbering
|
||
|
IS 18337 : 2023 ISO 16404: 2020 |
SPACE SYSTEMS PROGRAMME MANAGEMENT REQUIREMENTS MANAGEMENT
|
-
|
Identical under dual numbering
|
||
|
IS 18338 : 2023 ISO 10795: 2019 |
SPACE SYSTEMS PROGRAMME MANAGEMENT AND QUALITY VOCABULARY
|
-
|
Identical under dual numbering
|
||
|
IS 18339 : 2023 ISO 11893: 2011 |
SPACE SYSTEMS PROGRAMME MANAGEMENT PROJECT ORGANIZATION
|
-
|
Identical under dual numbering
|
||
|
IS 18346 : 2023 ISO 21350: 2023 |
SPACE SYSTEMS OFF-THE-SHELF ITEM UTILIZATION
|
-
|
Identical under dual numbering
|
||
|
IS 18891 : 2024 ISO 17770 : 2017 |
SPACE SYSTEMS � CUBE SATELLITES (CUBESATS)
|
-
|
Identical under dual numbering
|
||
|
IS 18895 : 2024 ISO 18676 : 2017 |
SPACE SYSTEMS - GUIDELINES FOR THE MANAGEMENT OF SYSTEMS ENGINEERING
|
-
|
Identical under dual numbering
|
||
|
IS 18896 : 2024 ISO 22010 : 2022 |
SPACE SYSTEMS - MASS PROPERTIES CONTROL
|
-
|
Identical under dual numbering
|
||
|
IS 18904 : 2024 ISO 11231: 2019 |
SPACE SYSTEMS PROBABILISTIC RISK ASSESSMENT PRA
|
-
|
Identical under dual numbering
|
||
|
IS 18906 : 2024 ISO 14623 : 2003 |
SPACE SYSTEMS PRESSURE VESSELS AND PRESSURIZED STRUCTURES DESIGN AND OPERATION
|
-
|
Identical under dual numbering
|
||
|
IS 18912 : 2024 ISO 15864 : 2021 |
SPACE SYSTEMS - GENERAL TEST METHODS FOR SPACECRAFT , SUBSYSTEMS AND UNITS
|
-
|
Identical under dual numbering
|
||
|
IS 18913 : 2024 ISO 16781 : 2021 |
SPACE SYSTEMS SIMULATION REQUIREMENTS FOR CONTROL SYSTEM
|
-
|
Identical under dual numbering
|
||
|
IS 6722 : 1972 Reviewed In : 2021 |
Dimensions for aircraft jacking pads
|
December, 2021
|
-
|
Modified/Technically Equivalent
|
|
|
IS 6723 : 1972 Reviewed In : 2021 |
Recommendations for aircraft instrument dials and pointers
|
March, 2021
|
-
|
Modified/Technically Equivalent
|
|
|
IS 6724 : 1972 Reviewed In : 2021 |
Specification for aircraft sealing wire
|
March, 2021
|
-
|
Modified/Technically Equivalent
|
|
|
IS 6724 : 2024 |
Aircraft Sealing Wire — Specification (ISO 244 : 1979, MOD) (First Revision)
|
-
|
Modified/Technically Equivalent
|
||
|
IS 6725 : 2008 ISO 245 Reviewed In : 2023 |
Aerospace - Lockwire - Diameters (First Revision)
|
July, 2023
|
1
|
Identical under dual numbering
|
|
|
IS 6741 : 1972 Reviewed In : 2023 Decision taken to Reaffirm and Archive |
Numerals for aircraft instrument dials and number plates
|
December, 2023
|
-
|
Modified/Technically Equivalent
|
|
|
IS 6742 : 2013 ISO 43 :1976 Reviewed In : 2018 |
Aircraft - Jacking pads (First Revision)
|
December, 2018
|
-
|
Identical under dual numbering
|
|
|
IS 6743 : 1972 Reviewed In : 2023 Decision taken to Reaffirm and Archive |
Sizes and mounting dimensions of aircraft instrument cases (Rear - Mounting Type)
|
December, 2023
|
-
|
Modified/Technically Equivalent
|
|
|
IS 6753 : 1972 Reviewed In : 2021 |
Code for identification of aircraft pipelines
|
March, 2021
|
-
|
Modified/Technically Equivalent
|
|
|
IS 6800 : 1972 Reviewed In : 2021 |
Dimensions for aircraft tow bar connections to tractors
|
March, 2021
|
-
|
Modified/Technically Equivalent
|
|
|
IS 7073 (Part 1) : 1973 Reviewed In : 2021 |
Glossary of terms relating to air cargo pallets and containers: Part 1 air cargo pallets
|
March, 2021
|
1
|
Indigenous
|
|
|
IS 7073 (Part 2) : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Glossary of terms relating to air cargo pallets and containers: Part 2 air cargo containers
|
March, 2019
|
-
|
Indigenous
|
|
|
IS 7074 : 1999 ISO 4171 Reviewed In : 2023 |
Air cargo equipment - Interline pallets (Second Revision)
|
July, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 7263 : 2024 |
Directions of Operation of Toggle Switches on Aircraft (First Revision)
|
-
|
Modified/Technically Equivalent
|
||
|
IS 7264 : 1974 Reviewed In : 2021 |
Dimensions for aircraft pressure refuelling connection
|
March, 2021
|
-
|
Modified/Technically Equivalent
|
|
|
IS 7264 : 2024 |
Aircraft Pressure Refuelling Connection — Dimensions (ISO 45 : 1990, MOD) (First Revision)
|
-
|
Modified/Technically Equivalent
|
||
|
IS 7828 : 2008 102 Reviewed In : 2023 Reaffirmed but not taken up for revision |
Aircraft - Gravity filling orifices (First Revision)
|
July, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 7829 : 1975 Reviewed In : 2023 Decision taken to Reaffirm and Archive |
Marking of aircraft gas cylinders
|
December, 2023
|
-
|
Modified/Technically Equivalent
|
|
|
IS 7831 : 1975 Reviewed In : 2021 |
Dimensions of aircraft lubricating nipples
|
March, 2021
|
-
|
Modified/Technically Equivalent
|
|
|
IS 7832 : 1975 Reviewed In : 2023 Decision taken to Reaffirm and Archive |
Dimensions for aircraft connections for ground air - Conditioning
|
December, 2023
|
-
|
Modified/Technically Equivalent
|
|
|
IS 7855 : 2011 ISO/TR 224 Reviewed In : 2017 |
Aircraft - Declaration of design and performance for aircraft equipment - Standard form (First Revision)
|
March, 2017
|
-
|
Identical under dual numbering
|
|
|
IS 7856 : 2023 ISO 6858:2017 |
Aircraft � Ground Support Electrical Supplies � General Requirements
|
-
|
Identical under dual numbering
|
||
|
IS 7857 : 1975 Reviewed In : 2021 |
Specification for aircraft - Fuel nozzle grounding plugs and sockets
|
March, 2021
|
-
|
Modified/Technically Equivalent
|
|
|
IS 7857 : 2024 |
Aircraft — Fuel Nozzle Grounding Plugs and Sockets — Specification (ISO 46 : 1973, MOD) (First Revision)
|
-
|
Modified/Technically Equivalent
|
||
|
IS 7879 (Part 1) : 1975 Reviewed In : 2021 |
Glossary of aeronautical and astronautical terms: Part 1 general
|
March, 2021
|
1
|
Indigenous
|
|
|
IS 7879 (Part 2) : 1975 Reviewed In : 2021 |
Glossary of aeronautical terms: Part 2 motion of aircraft
|
March, 2021
|
1
|
Indigenous
|
|
|
IS 7879 (Part 3) : 1975 Reviewed In : 2021 |
Glossary of aeronautical and astronautical terms: Part 3 structure
|
March, 2021
|
1
|
Indigenous
|
|
|
IS 7879 (Part 4) : 1980 Reviewed In : 2021 |
Glossary of aeronautical and astronautical terms: Part 4 aerodynamics
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 7879 (Part 5) : 1982 Reviewed In : 2021 |
Glossary of aeronautical and astronautical terms: Part 4 aerodynes (Heavier - Than - Air - Aircraft)
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 7879 (Part 6) : 1978 Reviewed In : 2021 |
Glossary of aeronautical and astronautical terms: Part 6 space terms
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 7879 (Part 7) : 1984 Reviewed In : 2021 |
Glossary of astronautical and astronautical terms: Part 7 air traffic and ground services
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 7879 (Part 8) : 1987 Reviewed In : 2021 |
Glossary of aeronautical and astronautical terms: Part 8 power plant
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 7915 : 1976 Reviewed In : 2022 |
Dimensions for connections for aircraft ground electrical supplies
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 8141 : 1976 Reviewed In : 2021 |
Tolerances for screw threads used in aeronautics
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 8169 : 1997 ISO 6517 Reviewed In : 2018 |
Air cargo equipment - Base - Restrained certified containers exclusively for the lower deck of high - Capacity air - Craft (First Revision)
|
April, 2018
|
-
|
Identical under dual numbering
|
|
|
IS 8252 (Part 1) : 1976 Reviewed In : 2021 |
Environmental tests for aircraft equipment: Part 1 general
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 8252 (Part 2) : 1980 Reviewed In : 2021 |
Environmental tests for aircraft equipment: Part 2 temperature, pressure and humidity
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 8252 (Part 3) : 1978 Reviewed In : 2021 |
Environmental tests for aircraft equipment: Part 3 humidity (24 - Hour Cycle)
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 8252 (Part 4) : 1980 Reviewed In : 2021 |
Environmental tests for aircraft equipment: Part 4 ice formatiOn
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 8252 (Part 6) : 1976 Reviewed In : 2021 |
Environmental tests for aircraft equipment: Part 6 waterproofness
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 8252 (Part 8) : 1979 Reviewed In : 2021 |
Environmental tests for aircraft equipment: Part 8 change of temperature
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 8252 (Part 10) : 1979 Reviewed In : 2021 |
Environmental tests for aircraft equipment: Part 10 salt mist
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 8252 (Part 11) : 1976 Reviewed In : 2021 |
Environmental - Tests for aircraft - Equipment: Part 11 differential pressure
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 8252 (Part 14) : 1982 Reviewed In : 2021 |
Environmental tests for aircraft equipment: Part 14 mechanical vibration
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 8252 (Part 16) : 1979 Reviewed In : 2021 |
Environmental tests for aircraft equipment: Part 16 shock
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 8252 (Part 18) : 1986 Reviewed In : 2021 |
Environmental tests for aircraft equipment: Part 18 magnetic influence (First Revision)
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 8252 (Part 21) : 1986 Reviewed In : 2021 |
Environmental tests for aircraft equipment: Part 21 explosion proofness
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 8396 : 1977 Reviewed In : 2021 |
Specification for air cargo base sandwich panel
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 8589 : 2011 ISO 4170 :1995 Reviewed In : 2022 |
Air cargo equipment - Interline pallet nets (Second Revision)
|
February, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 8705 : 1978 Reviewed In : 2021 |
Specification for static invertors for aircrafts
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 8706 : 1978 Reviewed In : 2021 |
Safety features for alternating current ground power units for aircraft - Servicing
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 8762 : 1978 Reviewed In : 2021 |
General requirements and testing of certified lower - Deck half - Size containers for high capacity aircraft
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 8834 : 1978 ISO 1033 Reviewed In : 2023 |
Dimensions for general purpose push - Pull three - Pole circuit - Breakers for aircraft
|
December, 2023
|
-
|
Indigenous
|
|
|
IS 8852 : 1978 ISO 530 Reviewed In : 2021 |
Dimensions for general purpose push - Pull single - Pole circuitbreakers for aircraft
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 8946 : 1978 Reviewed In : 2021 |
General requirements for rotating electrical machinery for aircraft
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 8980 : 1978 Reviewed In : 2021 |
Specification for general purpose push - Pull single - Pole circuit - Breakers for aircraft
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 8981 : 1978 Reviewed In : 2021 |
Specification for extra low voltage and low voltage spring return non - Latch switches for aircraft
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 9086 : 2003 Reviewed In : 2023 Reaffirmed but not taken up for revision |
Aerospace - Universal head aluminium alloy rivets - Specification (First Revision)
|
April, 2023
|
-
|
Modified/Technically Equivalent
|
|
|
IS 9087 : 2000 Reviewed In : 2021 |
Aircraft - 100° countersunk aluminium alloy rivets - Specification (First Revision)
|
March, 2021
|
1
|
Indigenous
|
|
|
IS 9088 : 1979 Reviewed In : 2021 |
Specification for universal head nickel alloy rivets for aircraft
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 9089 : 2004 Reviewed In : 2023 |
Aircraft - Aluminium and wrought aluminium alloy rivets - General requirements (Second Revision)
|
July, 2023
|
-
|
Indigenous
|
|
|
IS 9093 : 1979 Reviewed In : 2021 |
Specification for 100 degree countersunk nickel alloy rivets for aircraft
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 9156 : 1979 Reviewed In : 2021 |
Specification for dc generators for aircraft
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 9174 : 1979 ISO 493 Reviewed In : 2021 |
Dimensions for single - Hole mounted lever - Operated switches for aircraft
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 9196 : 1979 Reviewed In : 2023 Decision taken to Reaffirm and Archive |
Specification for rotary and linear actuators (AC and DC) for aircraft
|
November, 2023
|
-
|
Indigenous
|
|
|
IS 9204 : 1979 ISO 1950 Reviewed In : 2023 Decision taken to Reaffirm and Archive |
Marking of servicing, maint - Enance, ground handling and safety/hazard points on aircraft
|
December, 2023
|
-
|
Indigenous
|
|
|
IS 9290 : 1979 Reviewed In : 2020 |
Specification for aircraft fuel servicing vehicles
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 9624 : 1980 Reviewed In : 2021 |
Design criteria for aircraft passenger seats and berths
|
March, 2021
|
-
|
Indigenous
|
|
|
IS/ISO 9666 : 1993 Reviewed In : 2022 |
Aircraft - Self - Propelled lavatory servicing vehicle - Functional requirements
|
March, 2022
|
-
|
Identical under single numbering
|
|
|
IS 9671 : 1980 IEC 537 Reviewed In : 2023 Decision taken to Reaffirm and Archive |
Specification for frequency weighting for the measurement of aircraft noise (D - Weighting)
|
December, 2023
|
-
|
Indigenous
|
|
|
IS/ISO 9678 : 1991 Reviewed In : 2022 |
Aircraft - Self - Propelled potable - Water vehicle - Functional requirements
|
March, 2022
|
-
|
Identical under single numbering
|
| No Records Found |
| No Records Found |
| No Records Found |
|
TED 14 (22364)
|
SPACE SYSTEMS EXPERIENCE GAINED IN SPACE PROJECTS LESSONS LEARNED PRINCIPLES AND GUIDELINES |
|
|
TED 14 (22921)
|
SPACE SYSTEMS BELLOWS DESIGN AND OPERATION |
|
|
TED 14 (22935)
|
SPACE SYSTEMS STRUCTURAL DESIGN DETERMINATION OF LOADING LEVELS FOR STATIC QUALIFICATION TESTING OF LAUNCH VEHICLES |
|
|
TED 14 (22942)
|
SPACE SYSTEMS LAUNCH PAD AND INTEGRATION SITE FACILITY SYSTEM AND EQUIPMENT FAILURE ANALYSIS |
|
|
TED 14 (22946)
|
SPACE SYSTEMS The measured parameters at firing bench and flight tests of liquid rocket engines |
|
|
TED 14 (22949)
|
SPACE SYSTEMS LIQUID ROCKET ENGINES AND TEST STANDS TERMS AND DEFINITIONS |
|
|
TED 14 (22950)
|
SPACE SYSTEMS LITHIUM ION BATTERY FOR SPACE VEHICLES DESIGN AND VERIFICATION REQUIREMENTS |
|
|
TED 14 (22961)
|
SPACE SYSTEMS DESIGN QUALIFICATION AND ACCEPTANCE TESTS OF SMALL SPACECRAFT AND UNITS |
|
|
TED 14 (22977)
|
SPACE SYSTEMS - CAPABILITY-BASED SAFETY DEPENDABILITY AND QUALITY ASSURANCE SD QA PROGRAMME MANAGEMENT |
|
|
TED 14 (22978)
|
SPACE SYSTEMS STRUCTURAL DESIGN LOADS AND INDUCED ENVIRONMENT |
|
|
TED 14 (24556)
Revision of: IS 8980:1978 |
GENERAL PURPOSE PUSH-PULL SINGLE-POLE CIRCUIT-BREAKERS FOR AIRCRAFT PERFORMANCE REQUIREMENTS |
TED 14 (20706)
Revision of: IS 7879:1975 |
GLOSSARY OF AERONAUTICAL AND ASTRONAUTICAL TERMS PART 1 GENERAL |
|
TED 14 (20708)
Revision of: IS 7879:1975 |
GLOSSARY OF AERONAUTICAL AND ASTRONAUTICAL TERMS PART 2 MOTION OF AIRCRAFT |
|
TED 14 (20757)
Revision of: IS 7879:1975 |
GLOSSARY OF AERONAUTICAL AND ASTRONAUTICAL TERMS PART 3 STRUCTURE |
|
TED 14 (20759)
Revision of: IS 7879:1980 |
GLOSSARY OF AERONAUTICAL AND ASTRONAUTICAL TERMS PART 4 AERODYNAMICS |
|
TED 14 (20760)
Revision of: IS 7879:1982 |
GLOSSARY OF AERONAUTICAL AND ASTRONAUTICAL TERMS PART 5 AERODYNES HEAVIER-THAN-AIR AIRCRAFT |
|
TED 14 (20763)
Revision of: IS 7879:1978 |
GLOSSARY OF AERONAUTICAL AND ASTRONAUTICAL TERMS PART 6 SPACE TERMS |
|
TED 14 (20768)
Revision of: IS 7879:1987 |
GLOSSARY OF AERONAUTICAL AND ASTRONAUTICAL TERMS PART 8 POWER PLANT |
|
TED 14 (21135)
Revision of: IS 7879:1984 |
GLOSSARY OF AERONAUTICAL AND ASTRONAUTICAL TERMS PART 7 AIR TRAFFIC AND GROUND SERVICES |
|
TED 14 (21157)
Revision of: IS 8169:1997 |
AIR CARGO CERTIFIED LOWER DECK CONTAINERS DESIGN AND TESTING |
|
TED 14 (21356)
Revision of: IS 12678:1989 |
AIRCRAFT GROUND EQUIPMENT GRAPHICAL SYMBOLS |
|
TED 14 (21429)
Revision of: IS 11903:1986 |
AIRCRAFT INNER TUBE AND TUBELESS TYRE VALVES CORES AND CAPS TEST METHODS |
|
TED 14 (21434)
Revision of: IS 13932:1994 |
AIRCRAFT ELECTRICAL CABLES IDENTIFICATION MARKING |
|
TED 14 (21437)
Revision of: IS 11680:1986 |
AEROSPACE NUTS HEXAGONAL SLOTTED CASTELLATED NORMAL HEIGHT NORMAL ACROSS FLATS WITH MJ THREADS CLASSIFICATIONS 600 MPA AT AMBIENT TEMPERATURE 120 DEGREES C 600 MPA AT AMBIENT TEMPERATURE 235 DEGREES C 900 MPA AT AMBIENT TEMPERATURE 425 DEGREES C 1 100 MPA AT AMBIENT TEMPERATURE 235 DEGREES C 1 100 MPA AT AMBIENT TEMPERATURE 315 DEGREES C 1 100 MPA AT AMBIENT TEMPERATURE 650 DEGREES C 1 210 MPA AT AMBIENT TEMPERATURE 730 DEGREES C 1 250 MPA AT AMBIENT TEMPERATURE 235 DEGREES C AND 1 550 MPA AT AMBIENT TEMPERATURE 600 DEGREES C DIMENSIONS |
|
TED 14 (21439)
Revision of: IS 12863:1989 |
AIR CARGO EQUIPMENT HANDLING SYSTEMS FOR UNIT LOAD DEVICES ULDS SYMBOLS FOR PICTORIAL REPRESENTATION |
|
TED 14 (21442)
Revision of: IS 12043:1987 |
AIRCRAFT ELECTRICAL CONNECTORS DESIGN REQUIREMENTS |
|
TED 14 (21443)
Revision of: IS 11554:1986 |
Methods Of Test For Air - Land Cargo Pallet Nets |
|
TED 14 (21448)
|
AIRCRAFT JACKING PADS |
|
TED 14 (22362)
|
SPACE SYSTEMS QUALIFICATION ASSESSMENT |
|
TED 14 (22363)
|
SPACE SYSTEMS INTEGRATED LOGISTIC SUPPORT |
|
TED 14 (22365)
|
SPACE SYSTEMS RISK MANAGEMENT |
|
TED 14 (22366)
|
SPACE SYSTEMS PROJECT REVIEWS |
|
TED 14 (22367)
|
SPACE SYSTEMS GUIDELINES TO DEFINE THE MANAGEMENT FRAMEWORK FOR A SPACE PROJECT |
|
TED 14 (22915)
|
SPACE SYSTEMS EARLY OPERATIONS PART 1 SPACECRAFT INITIALIZATION AND COMMISSIONING |
|
TED 14 (22917)
|
SPACE SYSTEMS EARLY OPERATIONS PART 3 COMMISSIONING REPORT |
|
TED 14 (22920)
|
SPACE SYSTEMS - SUBSYSTEMSUNITS TO SPACECRAFT INTERFACE CONTROL DOCUMENT |
|
TED 14 (22923)
|
SPACE ENVIRONMENT NATURAL AND ARTIFICIAL EARTHS ATMOSPHERE FROM GROUND LEVEL UPWARD |
|
TED 14 (22925)
|
SPACE SYSTEMS LAUNCH-VEHICLE-TO-SPACECRAFT INTERFACES |
|
TED 14 (22927)
|
SPACE SYSTEMS - SURFACE CLEANLINESS OF FLUID SYSTEMS - PART 1 VOCABULARY |
|
TED 14 (22932)
|
SPACE SYSTEMS - SURFACE CLEANLINESS OF FLUID SYSTEMS - PART 4 ROUGH-CLEANING PROCESSES |
|
TED 14 (22934)
|
SPACE SYSTEMS - SURFACE CLEANLINESS OF FLUID SYSTEMS - PART 6 PRECISION-CLEANING PROCESSES |
|
TED 14 (22936)
|
SPACE SYSTEMS - CONTAMINATION AND CLEANLINESS CONTROL |
|
TED 14 (22937)
|
SPACE SYSTEMS LAUNCH-VEHICLE-TO-SPACECRAFT FLIGHT ENVIRONMENTS TELEMETRY DATA PROCESSING |
|
TED 14 (22938)
|
SPACE SYSTEMS SPACECRAFT-TO-LAUNCH-VEHICLE INTERFACE CONTROL DOCUMENT |
|
TED 14 (22940)
|
SPACE SYSTEMS - ASSESSMENT OF SURVIVABILITY OF UNMANNED SPACECRAFT AGAINST SPACE DEBRIS AND METEOROID IMPACTS TO ENSURE SUCCESSFUL POST-MISSION DISPOSAL |
|
TED 14 (22943)
|
SPACE ENVIRONMENT NATURAL AND ARTIFICIAL THE EARTH 39 S IONOSPHERE MODEL INTERNATIONAL REFERENCE IONOSPHERE IRI MODEL AND EXTENSIONS TO THE PLASMASPHERE |
|
TED 14 (22945)
|
SPACE SYSTEMS - RELATIVE MOTION ANALYSIS ELEMENTS AFTER LV SC SEPARATION |
|
TED 14 (22975)
|
SPACE SYSTEMS SPACE LAUNCH COMPLEXES INTEGRATION SITES AND OTHER FACILITIES GENERAL TESTING GUIDELINES |
|
TED 14 (22976)
|
SPACE SYSTEMS - ORBIT DETERMINATION AND ESTIMATION - PROCESS FOR DESCRIBING TECHNIQUES |
|
TED 14 (24557)
Revision of: IS 12043:1987 |
Aircraft Electrical Connectors Tests |
|
TED 14 (24558)
Revision of: IS 12545:1988 |
Aircraft Methodology of Calculating Cargo Compartment Volumes |
|
TED 14 (24559)
Revision of: IS 11437:1985 |
Air Cargo Equipment Ground Equipment Requirements For Compatibility with Aircraft Unit Load Devices |
|
TED 14 (24656)
|
Space Systems Programme Management Breakdown of Project Management Structures |
|
TED 14 (26250)
Revision of: IS 14389:1996 |
AIRCRAFT-PALLET DOLLEY FUNCTIONAL REQUIREMENTS |
|
TED 14 (22361)
|
SPACE SYSTEMS PROGRAMME MANAGEMENT PART 1 STRUCTURING OF A PROJECT | |
|
TED 14 (22916)
|
SPACE SYSTEMS EARLY OPERATIONS PART 2 INITIALIZATION PLAN | |
|
TED 14 (22918)
|
Space systems Structural components and assemblies | |
|
TED 14 (22922)
|
SPACE SYSTEMS - SPACE ENVIRONMENT NATURAL AND ARTIFICIAL - OBSERVED PROTON FLUENCES OVER LONG DURATION AT GEO AND GUIDELINES FOR SELECTION OF CONFIDENCE LEVEL IN STATISTICAL MODEL OF SOLAR PROTON FLUENCES | |
|
TED 14 (22924)
|
SPACE SYSTEMS - ELECTROMAGNETIC COMPATIBILITY REQUIREMENTS | |
|
TED 14 (22926)
|
SPACE SYSTEMS UNMANNED SPACECRAFT OPERABILITY | |
|
TED 14 (22930)
|
SPACE SYSTEMS - SURFACE CLEANLINESS OF FLUID SYSTEMS - PART 2 CLEANLINESS LEVELS | |
|
TED 14 (22931)
|
SPACE SYSTEMS - SURFACE CLEANLINESS OF FLUID SYSTEMS - PART 3 ANALYTICAL PROCEDURES FOR THE DETERMINATION OF NON VOLATILE RESIDUES AND PARTICULATE CONTAMINATION | |
|
TED 14 (22933)
|
SPACE SYSTEMS - SURFACE CLEANLINESS OF FLUID SYSTEMS - PART 5 DRYING PROCESSES | |
|
TED 14 (22941)
|
SPACE SYSTEMS - AVOIDING COLLISIONS AMONG ORBITING OBJECTS | |
|
TED 14 (22948)
|
Space systems Spacecraft interface requirements document for launch vehicle services | |
|
TED 14 (22951)
|
SPACE SYSTEMS - INTERFACE CONTROL DOCUMENTS BETWEEN GROUND SYSTEMS GROUND SUPPORT EQUIPMENT AND LAUNCH VEHICLE WITH PAYLOAD | |
|
TED 14 (22953)
|
SPACE ENVIRONMENT NATURAL AND ARTIFICIAL MODEL OF HIGH ENERGY RADIATION AT LOW ALTITUDES 300 KM TO 600 KM | |
|
TED 14 (22963)
|
SPACE SYSTEMS PRODUCT ASSURANCE REQUIREMENTS FOR COMMERCIAL SATELLITES | |
|
TED 14 (22967)
|
SPACE SYSTEMS REQUIREMENTS FOR SMALL SPACECRAFT | |
|
TED 14 (22973)
|
SPACE SYSTEMS - GENERAL TEST REQUIREMENTS FOR LAUNCH VEHICLES |
|
|
IS 10494 : 1983 ISO 6966 Reviewed In : 2008 |
Specification for wooden sleepers for railway track |
|
|
IS 11715 : 1986 ISO 3353 Reviewed In : 2011 |
Rolled Threads For Aerospace Fasteners |
|
|
IS 11887 : 1986 Reviewed In : 2007 |
Cores for Aircraft Tyre Tube Valves |
|
|
IS 13835 : 1993 ISO 461-1 Reviewed In : 2008 |
Aircraft - Connectors for ground electrical supplies-design performance and test requirements |
|
|
IS 6764 : 1972 |
Colour code for identification of aircraft mechanical control circuits |
|
|
IS 7073 : 1973 Reviewed In : 2010 |
Glossary of terms relating to air cargo pallets and containers |
|
|
IS 7269 : 1974 Reviewed In : 2010 |
Numbering of aircraft engines engine cylinders combustion chambers and direction of rotation of engines and propellers |
|
|
IS 7274 : 1973 Reviewed In : 2010 |
Referencing system of aircraft zones access doors and panels |
|
|
IS 7830 : 1975 Reviewed In : 2010 |
Dimensions of aircraft sheet rails and pins Requirements covered in IS 11165 1985 |
|
|
IS 7854 : 1975 Reviewed In : 2010 |
Voltages and frequency for aircraft electrical systems |
|
IS 10195 : 1982 Reviewed In : 2019 Reaffirmed but not taken up for revision |
General requirements for insulated air cargo containers |
|
|
IS 10237 : 1982 Reviewed In : 2021 |
Specification for DC motors for aircraft |
|
|
IS 10240 : 1982 Reviewed In : 2021 |
General requirements for electrical equipment for aircraft |
|
|
IS 10241 (Part 2) : 1982 Reviewed In : 2021 |
Specification for electrical cables for aircraft Part 2 pren type electric cables |
|
|
IS 10241 (Part 3) : 1987 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for electric cables for aircraft Part 3 nyvin type electric cables |
|
|
IS 10494 (Part 1) : 2012 ISO 6966_1 Reviewed In : 2022 |
Aircraft ground equipment - Basic requirements Part 1 general design requirements First Revision |
|
|
IS 10515 : 1983 Reviewed In : 2019 Reaffirmed but not taken up for revision |
General requirements of main deck container pallet loader for aircraft |
|
|
IS 10628 : 1983 Reviewed In : 2021 |
General requirements for aerospace bolts and nuts |
|
|
IS 10682 : 1983 Reviewed In : 2021 |
Specification for aircraft safety belts lap type |
|
|
IS 10869 (Part 1) : 1984 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for igloo Part 1 non - Structural igloo |
|
|
IS 10869 (Part 2) : 1984 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for igloo Part 2 structural igloo assembly |
|
|
IS 10965 : 1984 Reviewed In : 2021 |
Specification for valves for aircraft tyre tubes |
|
|
IS 10980 (Part 1) : 2014 ISO 5855-1 : 1999 Reviewed In : 2019 |
Aerospace - MJ threads Part 1 general requirements First Revision |
|
|
IS 10992 (Part 1) : 2003 ISO 3324-1 Reviewed In : 2023 Reaffirmed but not taken up for revision |
Aircraft tyres and Part 1 specifications First Revision |
|
|
IS 10992 (Part 2) : 2003 ISO 3324-2 Reviewed In : 2023 Reaffirmed but not taken up for revision |
Aircraft tyres and rims Part 2 test methods for tyres First Revision |
|
|
IS 11165 : 1985 Reviewed In : 2021 |
Specification for aircraft seat rails and pins |
|
|
IS 11167 : 2011 ISO 6968 : 2005 Reviewed In : 2021 |
Aircraft ground equipment - Lower deck loader - Functional requirements Second Revision |
|
|
IS 11436 : 1985 Reviewed In : 2021 |
General requirements for ground handling and transport systems equipment for air cargo unit load devices |
|
|
IS 11437 : 1985 Reviewed In : 2021 |
Ground equipment requirement for compatibility with aircraft unit load devices |
|
|
IS 11438 : 1985 Reviewed In : 2021 |
Functional requirements for air cargo unit load devices transport vehicle UTV |
|
|
IS 11499 : 1996 ISO 4117 Reviewed In : 2021 |
Air and air land cargo pallets - Specification and testing First Revision |
|
|
IS 11553 : 2011 Reviewed In : 2023 |
Air cargo equipment - Air land pallet nets First Revision |
|
|
IS 11642 (Part 1) : 1986 Reviewed In : 2022 |
Specification for aluminium hexagonal honeycomb core Part 1 general requirements |
|
|
IS 11649 (Part 1) : 1986 Reviewed In : 2022 |
Specification for aluminium honeycomb sandwich panel for civil aircraft floors Part 1 general design criteria |
|
|
IS 11680 : 1986 Reviewed In : 2022 |
Specification for hexagonal slotted Castellated nuts MJ Series |
|
|
IS 11715 (Part 1) : 2024 ISO 3353 : Part 1 : 2020 |
Aerospace Lead and Runout Threads Part 1 Rolled External Threads Second Revision |
|
|
IS 11715 (Part 2) : 2024 ISO 3353-2:2020 |
Aerospace Lead and Runout Threads Part 2 Internal Threads Second Revision |
|
|
IS 11903 : 1986 Reviewed In : 2022 |
Specification for caps for aircraft tyre tube valves |
|
|
IS 12043 (Part 1) : 1987 Reviewed In : 2019 |
Specification for electrical connectors for aircraft Part 1 general requirements |
|
|
IS 12044 : 1987 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for mechanically operated switches for use in aircrafts |
|
|
IS 12462 : 1988 ISO 6965 Reviewed In : 2023 Decision taken to Reaffirm and Archive |
Functional requirements for self - Propelled gantry for lifting air cargo containers and outsize cargoes |
|
|
IS 12524 : 1988 Reviewed In : 2019 Reaffirmed but not taken up for revision |
General requirements for main deck baggage container loader |
|
|
IS 12559 : 1989 Reviewed In : 2019 Reaffirmed but not taken up for revision |
General requirements for self - Propelled conveyor - Belt loader |
|
|
IS 12603 : 1988 Reviewed In : 2023 Decision taken to Reaffirm and Archive |
General requirements for future wide - Body aircraft cargo - Systems and compartments - Intermodal |
|
|
IS 12842 : 1989 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Tie - Down fittings - Aircraft net assemblies - Specification |
|
|
IS 13153 : 2024 ISO 8279:2008 |
Aerospace Nuts Hexagonal Plain Normal Height Normal Across Flats with MJ Threads Classifications 600 Mpa at Ambient Temperature 120 C 600 Mpa at Ambient Temperature 235 C 900 Mpa at Ambient Temperature 425 C 1 100 Mpa at Ambient Temperature 235 C 1 100 Mpa at Ambient Temperature 315 C 1 100 Mpa at Ambient Temperature 650 C 1 210 Mpa at Ambient Temperature 730 C 1 250 Mpa at Ambient Temperature 235 C And 1 550 Mpa at Ambient Temperature 600 C Dimensions First Revision |
|
|
IS 13259 : 1992 ISO 7717 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Aircrafttow tractors - Performance requirements |
|
|
IS 13283 : 2024 ISO 7995:2002 |
Aerospace Nuts Hexagonal Self-locking with MJ Threads Classification 1 100 MPa at Ambient Temperature 235 C 1 100 MPa at Ambient Temperature 315 C and 1 100 MPa at Ambient Temperature 425 C Dimensions First Revision |
|
|
IS 13296 : 1992 ISO 3456 Reviewed In : 2022 |
Aircraft - Performance requirements for lever operated manual switches Class 3 - Specification |
|
|
IS 13309 : 1992 ISO 1466 Reviewed In : 2022 |
Aircraft - Performance requirements for lever operated manual switches Class 1 And 2 - Specification |
|
|
IS 13835 (Part 1) : 2011 ISO 461-1 : 2003 Reviewed In : 2022 |
Aircraft - Connectors for ground electrical supplies Part 1 design performance and test requirements First Revision |
|
|
IS 13932 : 1994 ISO 2574 Reviewed In : 2021 |
Aircraft - Electrical cables - Identification marking |
|
|
IS 14388 : 1996 Reviewed In : 2022 |
Aircraft - Lower - Deck turn table container - Dolley functional requirements |
|
|
IS 14389 : 1996 Reviewed In : 2022 |
Aircraft - Pallet dolley - Functional requirements |
|
|
IS 14431 : 1997 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Airport passenger bus - Functional requirements |
|
|
IS 14432 : 1997 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Air craft - Ambulift - Functional requirements |
|
|
IS 14548 : 1998 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Aircraft - Standby magnetic compass - Specification |
|
|
IS 14576 : 1998 ISO 12056 Reviewed In : 2023 |
Aircraft - Self - Propelled passenger stairs for large capacity aircraft - Functional requirements |
|
|
IS 14790 : 2000 ISO 10841 Reviewed In : 2021 |
Aircraft - Catering vehicle for large capacity aircraft - Functional requirements |
|
|
IS 14798 : 2000 ISO 3168 Reviewed In : 2021 |
Aerospace - Self - Locking fixed single - Lug anchor nuts with counterbore classification 1100 mpa 235 degree C - Specification |
|
|
IS 14799 : 2000 Reviewed In : 2021 |
Aerospace - Nuts anchor self - Locking floating two - Lug with counterbore with mj threads coated or uncoated classification 1100 mpa 235 C 1100 mpa 315 C and 1 100 mpal425 C - Specification |
|
|
IS 14824 : 2000 ISO 3191 Reviewed In : 2021 |
Aerospace - Self - Locking fixed single - Lug anchor nuts reduced series with counterbore with MJ threads strength classification 1100 mpa 235 deg C - Specification |
|
|
IS 15192 : 2024 ISO 8788:2020 |
Aerospace Nuts Metric Tolerances of Form and Position First Revision |
|
|
IS 15293 : 2003 ISO 5858 Reviewed In : 2023 |
Aerospace - Nuts self - Locking with maximum operating temperature less than or equal to 425 deg C - Procurement specification |
|
|
IS 15428 : 2004 Reviewed In : 2021 |
Retreading of radial cross ply tyres for aircraft - Specification |
|
|
IS 15437 : 2024 ISO 5856:2008 |
Aerospace Screws 100 Degrees Normal Countersunk Head Internal Offset Cruciform Ribbed or Unribbed Drive Normal Shank Short or Medium Length MJ Threads Metallic Material Coated or Uncoated Strength Classes Less Than or Equal to 1 100 Mpa Dimensions |
|
|
IS 15469 : 2024 ISO 3185:2021 |
Aerospace Bolts Normal Bihexagonal Heads Normal Shank Short or Medium Length MJ Threads Metallic Material Coated or Uncoated Strength Classes Less Than or Equal to 1 100 MPa Dimensions Second Revision |
|
|
IS 15471 : 2012 ISO 8641 : 2008 Reviewed In : 2023 |
Aerospace - Self - Locking nuts with maximum operating temperature greater than 425 deg C - Procurement specification First Revision |
|
|
IS 18891 : 2024 ISO 17770 : 2017 |
SPACE SYSTEMS CUBE SATELLITES CUBESATS |
|
|
IS 18906 : 2024 ISO 14623 : 2003 |
SPACE SYSTEMS PRESSURE VESSELS AND PRESSURIZED STRUCTURES DESIGN AND OPERATION |
|
|
IS 6723 : 1972 Reviewed In : 2021 |
Recommendations for aircraft instrument dials and pointers |
|
|
IS 6724 : 2024 |
Aircraft Sealing Wire Specification ISO 244 1979 MOD First Revision |
|
|
IS 6741 : 1972 Reviewed In : 2023 Decision taken to Reaffirm and Archive |
Numerals for aircraft instrument dials and number plates |
|
|
IS 6742 : 2013 ISO 43 :1976 Reviewed In : 2018 |
Aircraft - Jacking pads First Revision |
|
|
IS 7074 : 1999 ISO 4171 Reviewed In : 2023 |
Air cargo equipment - Interline pallets Second Revision |
|
|
IS 7828 : 2008 102 Reviewed In : 2023 Reaffirmed but not taken up for revision |
Aircraft - Gravity filling orifices First Revision |
|
|
IS 7857 : 2024 |
Aircraft Fuel Nozzle Grounding Plugs and Sockets Specification ISO 46 1973 MOD First Revision |
|
|
IS 8169 : 1997 ISO 6517 Reviewed In : 2018 |
Air cargo equipment - Base - Restrained certified containers exclusively for the lower deck of high - Capacity air - Craft First Revision |
|
|
IS 8396 : 1977 Reviewed In : 2021 |
Specification for air cargo base sandwich panel |
|
|
IS 8589 : 2011 ISO 4170 :1995 Reviewed In : 2022 |
Air cargo equipment - Interline pallet nets Second Revision |
|
|
IS 8705 : 1978 Reviewed In : 2021 |
Specification for static invertors for aircrafts |
|
|
IS 8762 : 1978 Reviewed In : 2021 |
General requirements and testing of certified lower - Deck half - Size containers for high capacity aircraft |
|
|
IS 8980 : 1978 Reviewed In : 2021 |
Specification for general purpose push - Pull single - Pole circuit - Breakers for aircraft |
|
|
IS 8981 : 1978 Reviewed In : 2021 |
Specification for extra low voltage and low voltage spring return non - Latch switches for aircraft |
|
|
IS 9086 : 2003 Reviewed In : 2023 Reaffirmed but not taken up for revision |
Aerospace - Universal head aluminium alloy rivets - Specification First Revision |
|
|
IS 9087 : 2000 Reviewed In : 2021 |
Aircraft - 100 deg countersunk aluminium alloy rivets - Specification First Revision |
|
|
IS 9088 : 1979 Reviewed In : 2021 |
Specification for universal head nickel alloy rivets for aircraft |
|
|
IS 9089 : 2004 Reviewed In : 2023 |
Aircraft - Aluminium and wrought aluminium alloy rivets - General requirements Second Revision |
|
|
IS 9093 : 1979 Reviewed In : 2021 |
Specification for 100 degree countersunk nickel alloy rivets for aircraft |
|
|
IS 9156 : 1979 Reviewed In : 2021 |
Specification for dc generators for aircraft |
|
|
IS 9196 : 1979 Reviewed In : 2023 Decision taken to Reaffirm and Archive |
Specification for rotary and linear actuators AC and DC for aircraft |
|
|
IS 9290 : 1979 Reviewed In : 2020 |
Specification for aircraft fuel servicing vehicles |
|
|
IS/ISO 9666 : 1993 Reviewed In : 2022 |
Aircraft - Self - Propelled lavatory servicing vehicle - Functional requirements |
|
|
IS/ISO 9678 : 1991 Reviewed In : 2022 |
Aircraft - Self - Propelled potable - Water vehicle - Functional requirements |