Programme of work

  1. Home
  2. Programme of work

BUREAU OF INDIAN STANDARDS


Transport Engineering Department

Programme of Work




TED7 : Automotive Tyres, Tubes And Rims


  • Scope : a) Standardization of automotive tyres, tubes, rims and related. b) Co-ordination of work with ISO/TC 31 and its relevant subcommittees ISO/TC 31/SC 3, ISO/TC 31/SC 4, ISO/TC 31/SC 5, ISO/TC 31/SC 6, ISO/TC 31/SC 7, ISO/TC 31/SC 8, ISO/TC 31/SC 9 and ISO/TC 31/SC 10, c) Co-ordination of work with ISO/ TC 22 and its Sub-committee ISO/TC 22/SC 33 and ISO/TC 22/SC 38.
  • Liaison :
    ISO/TC 31 - Tyres, rims and valves - Participating (P)
    ISO/TC 31/SC 3 - Passenger car tyres and rims - Participating (P)
    ISO/TC 31/SC 3/WG 22 - Artificially worn tyres
    ISO/TC 31/SC 4 - Truck and bus tyres and rims - Participating (P)
    ISO/TC 31/SC 5 - Agricultural tyres and rims - Participating (P)
    ISO/TC 31/SC 6 - Off-the-road tyres and rims - Observer (O)
    ISO/TC 31/SC 7 - Industrial tyres and rims - Participating (P)
    ISO/TC 31/SC 9 - Valves for tube and tubeless tyres - Participating (P)
    ISO/TC 31/WG 11 - Tyre noise test methods
    ISO/TC 31/WG 13 - Tyre abrasion measurement
    ISO/TC 22/ SC 33 - Vehicle dynamics, chassis components and driving automation systems testing - Observer (O)
    ISO TC 31/SC 10 - Cycle, moped, motorcycle tyres and rims - Participating (P)
    ISO TC 22 - Road vehicles - Participating (P)

Published Standards

SI. No.
IS No.
Title
Reaffirmation Details
No. of Amendments
Degree of Equivalence
1.
 IS 10694 (Part 1) : 2009
Reviewed In : 2017
Automotive vehicles - Rims - General requirements: Part 1 nomenclature, designation, marking and measurement (First Revision)
March, 2017
1
Indigenous
2.
 IS 10694 (Part 2) : 2009
Reviewed In : 2024
Automotive vehicles - Rims - General requirements: Part 2 passenger car (Second Revision)
September, 2024
-
Indigenous
3.
 IS 10694 (Part 3) : 2009
Reviewed In : 2024
Automotive vehicles - Rims - General requirements: Part 3 commercial vehicle rims (Second Revision)
September, 2024
-
Indigenous
4.
 IS 10694 (Part 4) : 1983
Reviewed In : 2024
General requirements for rims for automotive vehicles: Part 4 scooter and scooter derivative rims
September, 2024
-
Indigenous
5.
 IS 10694 (Part 5) : 1987
Reviewed In : 2024
General requirements for rims for automotive vehicles: Part 5 moped, motorcycle and motorcycle derivative rims (First Revision)
September, 2024
-
Indigenous
6.
 IS 10694 (Part 6) : 2009
Reviewed In : 2024
Automotivevehicles - Rims - Generalrequirements: Part 6 rims for agricultural tractors,tillers and implements (Second Revision)
September, 2024
-
Indigenous
7.
 IS 10694 (Part 7) : 1983
Reviewed In : 2023
General requirements for rims for automotive vehicles: Part 7 industrial truck rims
April, 2023
-
Indigenous
8.
 IS 10939 : 2023
DESIGNATION SYSTEM FOR TYRE TUBE VALVES FOR AUTOMOTIVE VEHICLES
-
Indigenous
9.
 IS 11031 : 2023
RECOMMENDATIONS FOR STORAGE AND HANDLING OF INNER TUBES TUBE VALVES AND FLAPS FOR USE WITH PNEUMATIC TYRES FOR AUTOMOTIVE VEHICLES
-
Indigenous
10.
 IS 11178 : 2023
RECOMMENDATIONS FOR STORAGE AND HANDLING OF PNEUMATIC TYRES FOR AUTOMOTIVE VEHICLES
-
Indigenous
11.
 IS 12098 : 1987
Reviewed In : 2024
Specification for rim wheels for pneumatic tyres for animal drawn vehicles
March, 2024
-
Indigenous
12.
 IS 13098 : 2024
AUTOMOTIVE VEHICLES TUBES FOR PNEUMATIC TYRES — SPECIFICATION (second revision)
-
Indigenous
13.
 IS 13098 : 2012
Reviewed In : 2017
Automotive vehicles - Tubes for pneumatic tyres - Specification (First Revision)
May, 2017
-
Indigenous
14.
 IS 13154 : 2015

Reviewed In : 2020
Automotive vehicles - Tyres for agricultural vehicles and their trailers - Specification (First Revision)
September, 2020
-
Indigenous
15.
 IS 13243 : 2014
Reviewed In : 2019
Automotive vehicles - Commercial vehicles - Attachments on hubs for wheels - Dimensions (First Revision)
January, 2019
-
Indigenous
16.
 IS 13444 : 2024
Animal Drawn Vehicles — Pneumatic Tyres — Specification (First Revision)
-
Indigenous
17.
 IS 13531 : 2005
Reviewed In : 2024
Automotive tyres - Tyre - Retreading materials for mould cure process (First Revision)
September, 2024
-
Indigenous
18.
 IS 14771 : 2018
ISO 9112 : 2008
Reviewed In : 2023
Truck and bus tyres - Methods of measuring tyre rolling circumference - Loaded new tyres (First Revision)
April, 2023
-
Indigenous
19.
 IS/ISO 14960-2 : 2014
ISO 14960-2:2014
TUBELESS TYRES VALVES AND COMPONENTS PART 2: CLAMP-IN TUBELESS TYRE VALVE-TEST METHOD
-
Identical under dual numbering
20.
 IS/ISO 14960-2 : 2014
ISO 14960-2 : 2014
Reviewed In : 2019
Tubeless tyres - Valves and components: Part 2 clamp - In tubeless tyre valve - Test method
July, 2019
-
Identical under single numbering
21.
 IS 15523 : 2018

Reviewed In : 2023
Automotive tyres - Precured patches for repairing cross ply/ radial tyres and inner tubes - Specification (First Revision)
December, 2023
-
Indigenous
22.
 IS 15524 : 2018

Reviewed In : 2023
Automotive vehicles - Retreading of tyres by the pre - Cured process - Specification (First Revision)
December, 2023
-
Indigenous
23.
 IS 15563 : 2005
ISO 17269
Reviewed In : 2024
Passenger car tyres - Methods for measuring rolling circumFerence - Loaded new tyres
September, 2024
-
Indigenous
24.
 IS 15627 : 2022
Automotive Vehicles - Pneumatic Tyres for Two and Three - Wheeled Motor Vehicles - Specification First Revision
-
Indigenous
25.
 IS 15627 : 2022
Automotive Vehicles - Pneumatic Tyres for Two and Three - Wheeled Motor Vehicles - Specification First Revision
1
Indigenous
26.
 IS 15633 : 2022
Automotive vehicles - pneumatic tyres for passenger car vehicles - diagonal and radial ply
1
Indigenous
27.
 IS 15636 : 2022
Automotive vehicles - Pneumatic tyres for commercial vehicles - Diagonal and radial ply
-
Indigenous
28.
 IS 15645 : 2014
SO 7141 : 2005
Reviewed In : 2024
Road vehicles - Light alloy wheels - Impact test (First? Revision)
September, 2024
-
Indigenous
29.
 IS 15704 : 2018

Reviewed In : 2023
Automotive vehicles - Retreaded pneumatic tyres for commercial vehicles - Specification (First Revision)
December, 2023
-
Indigenous
30.
 IS 15709 : 2018

Reviewed In : 2023
Automotive vehicles - Retreaded pneumatic tyres for passenger car - Specification (First Revision)
December, 2023
-
Indigenous
31.
 IS 15724 : 2006
Reviewed In : 2017
Automotive tyres - Retreading procedure - Hot process
March, 2017
-
Indigenous
32.
 IS 15725 : 2006
Reviewed In : 2023
Automotive tyres - Tyre curing envelop - Cold process
December, 2023
-
Indigenous
33.
 IS 15731 : 2018

Reviewed In : 2023
Automotive tyres - Selection and inspection of retreadable tyre casing (First Revision)
December, 2023
-
Indigenous
34.
 IS 15753 : 2007
Reviewed In : 2023
Automotive tyres - Tyre curing bladder - Cold process
December, 2023
-
Indigenous
35.
 IS 15780 : 2007
Reviewed In : 2023
Automotive tyres - Repair of tyres and tubes used on motor vehicles
December, 2023
-
Indigenous
36.
 IS 15794 : 2007
Reviewed In : 2024
Road hazard impact test for wheel and tyre assemblies (Passenger Cars, Light Trucks And Multipurpose Vehicles)
March, 2024
-
Indigenous
37.
 IS 15945 : 2011
Reviewed In : 2023
Tubeless tyres - Valves and components - Test methods
April, 2023
-
Indigenous
38.
 IS 16192 (Part 1) : 2014
Reviewed In : 2019
Automotive vehicles - Wheel rims for two and three wheeled vehicles: Part 1 light alloy wheel rims - Method of tests and requirements
June, 2019
2
Indigenous
39.
 IS 16192 (Part 2) : 2014
Reviewed In : 2019
Automotive vehicles - Wheel rims for two and three wheeled vehicles: Part 2 sheet metal wheel rims - Method of tests and requirements
June, 2019
2
Indigenous
40.
 IS 16192 (Part 3) : 2018

Reviewed In : 2024
Automotive vehicles - Wheel rims for two and three wheeled vehicles: Part 3 Spoke Wheel Rims ---Method of tests and requirements
March, 2024
1
Indigenous
41.
 IS/ISO 16392 : 2017
ISO 16392:2017
TYRES ELECTRICAL RESISTANCE TEST METHOD FOR MEASURING ELECTRICAL RESISTANCE OF TYRES ON A TEST RIG
-
Identical under single numbering
42.
 IS/ISO 18164 : 2005
ISO 18164
Reviewed In : 2024
Passenger car, truck, bus and motorcycle tyres - Methods of measuring rolling resistance
September, 2024
-
Indigenous
43.
 IS 18258 : 2023
Evaluation of Tyres with regard to Rolling Sound Emission andor to adhesion on wet surface andor to Rolling Resistanace
-
Indigenous
44.
 IS/ISO 18885-1 : 2017
ISO 18885-1:2017
TPMS SNAP-IN VALVES PART 1: IDENTIFICATION
-
Identical under single numbering
45.
 IS/ISO 18885-2 : 2018
ISO 18885-2:2018
TPMS SNAP-IN VALVES PART 2: VALVE ENVIRONMENT
-
Identical under single numbering
46.
 IS/ISO 18885-3 : 2021
ISO 18885-3:2021
TPMS SNAP-IN VALVES PART 3: PERFORMANCES
-
Identical under single numbering
47.
 IS/ISO 20562 : 2014
ISO 20562 : 2014
Reviewed In : 2024
Tyre valves - Iso core chambers no. 1, no. 2, no. 3 and no. 4 (First Revision)
March, 2024
-
Indigenous
48.
 IS/ISO 28580 : 2009
ISO 28580 : 2009
Reviewed In : 2017
Passenger car, truck and bus tyres - Methods of measuring rolling resistance - Single point test and correlation of measurement results
-
Indigenous
49.
 IS/ISO 4570 : 2002
4570 : 2002
Reviewed In : 2019
Tyre valve threads
July, 2019
-
Indigenous
50.
 IS 9081 : 2024
Automotive Vehicles - Valves and Valve Accessories for Pneumatic Tyres - Specification (Sixth Revision)
-
Indigenous
51.
 IS 9081 : 2017
Automotive vehicles - Valves and valve accessories for pneumatic tyres - Specification (Fifth Revision)
-
1
Indigenous
52.
 IS 9168 : 2018

Reviewed In : 2024
Automotive vehicle - All rubber flaps for pneumatic tyres - Specification (Second Revision)
March, 2024
1
Indigenous
53.
 IS 9436 : 2018

Reviewed In : 2024
Performance requirements and methodsof test for wheels for passenger cars, quadricycles and mini goods cariers (First Revision)
March, 2024
2
Indigenous
54.
 IS 9438 : 2018

Reviewed In : 2024
Performance requirements and methods of tests for wheels/ rims for trucks and buses (First Revision)
March, 2024
2
Indigenous
55.
 IS 9453 : 2014
Reviewed In : 2019
Valve caps for tyre tube valves for automotive vehicles - Specification (Second Revision)
January, 2019
-
Indigenous
56.
 IS 9643 : 1980
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Specification for non - Skid type chain assembly for tyres - Single type
March, 2024
-
Indigenous

Standards Under Develpoment

Projects Approved

SI. No.
Doc No
TITLE
No Records Found

Preliminary Draft Standards

SI. No.
Doc No
TITLE
No Records Found

Drafts Standards in WC Stage

SI. No.
Doc No
TITLE
1
TED 7 (19704)
Revision of: IS/ISO 28580:2009
Passenger car truck and bus tyre rolling resistance measurement method Single point test and correlation of measurement results
2
TED 7 (24717)
Evaluation of Tyres with regard to Rolling Sound Emission andor to adhesion on wet surface andor to Rolling Resistanace Amendment - 1
3
TED 7 (26243)
AUTOMOTIVE VEHICLES TUBES FOR PNEUMATIC TYRES SPECIFICATION second revision Amendment - 1

Draft Standards Completed WC Stage

SI. No.
Doc No
TITLE
1
TED 7 (21145)
AUTOMOTIVE VEHICLES PNEUMATIC TYRES FOR COMMERCIAL VEHICLES DIAGONAL AND RADIAL PLY SPECIFICATION Second Revision - Amendment no 1
2
TED 7 (21198)
Revision of: IS 10694:2009
AUTOMOTIVE VEHICLES RIMS GENERAL REQUIREMENTS PART 1 NOMENCLATURE DESIGNATION MARKING AND MEASUREMENT
3
TED 7 (24492)
AUTOMOTIVE VEHICLES WHEEL RIMS FOR TWO AND THREE WHEELED VEHICLES PART 1 LIGHT ALLOY WHEEL RIMS METHODS OF TESTS AND REQUIREMENTS
4
TED 7 (24494)
Automotive Vehicles - Pneumatic Tyres for Passenger Car Vehicles- Diagonal and Radial Ply - Specification
5
TED 7 (25810)
Revision of: IS 13154:2015
Automotive vehicles - Tyres for agricultural vehicles and their trailers - Specification
6
TED 7 (26014)
Automotive tyres - Precured patches for repairing cross ply radial tyres and inner tubes - Specification First Revision Amendment - 1
7
TED 7 (26015)
Automotive vehicles - Retreaded pneumatic tyres for commercial vehicles - Specification First Revision Amendment - 1
8
TED 7 (26017)
Automotive vehicles - Retreaded pneumatic tyres for passenger car - Specification First Revision Amendment - 1
9
TED 7 (26018)
Automotive tyres - Tyre curing bladder - Cold process Amendment - 1
10
TED 7 (26019)
Automotive tyres - Selection and inspection of retreadable tyre casing First Revision Amendment - 1
11
TED 7 (26231)
Road hazard impact test for wheel and tyre assemblies Passenger Cars Light Trucks And Multipurpose Vehicles Amendment - 1

Finalized Draft Indian Standard

SI. No.
Doc No
TITLE
1
TED 7 (25826)
Revision of: IS/ISO 14960:2014
TUBELESS TYRES VALVES AND COMPONENTS PART 2 CLAMP-IN TUBELESS TYRE VALVE-TEST METHOD

Finalized Draft Indian Standards under Print

SI. No.
Doc No
TITLE
1
TED 7 (21201)
Automotive tyres - Retreading procedure - Hot process Amendment - 1
2
TED 7 (24491)
AUTOMOTIVE VEHICLES WHEEL RIMS FOR TWO AND THREE WHEELED VEHICLES PART 3 SPOKE WHEEL RIMS METHODS OF TESTS AND REQUIREMENTS Amendment no 2


Aspect Wise Report

 
 Product:   29
 Code of Practices :    1
 Methods of Test :   16
 Terminology :   0
 Dimensions :   2
 System Standard :   0
 Safety Standard :   1
 Others :    3
 Service Specification :    0
 Process Specification :    0
 Unclassified :    0
 


Annexure-I :List of Indian Standards Withdrawn/Superseded

SI. No.
IS No.
Title
1.
 IS 10694 (Part 8) : 2009
Reviewed In : 2019
Automotive vehicles - Rims - General requirements Part 8 earthmoving machine rims First Revision
2.
 IS 10914 (Part 1) : 1991
Automotive Vehicles - Pneumatic Tyres - Part 1 Terms Definitions and Nomenclature
3.
 IS 10914 (Part 2) : 1992
Automotive Vehicles - Pneumatic Tyres - Part 2 Truck Bus and Light Truck Tyres - Diagonal Ply
4.
 IS 10914 (Part 3) : 1991
Automotive Vehicles - Pneumatic Tyres - Diagonal Ply - Part 3 Passenger Car Tyres
5.
 IS 10914 (Part 4) : 1992
Automotive Vehicles-pneumatic Tyres - Part 4 Scooter and Scooter Derivatives - Diagonal Ply
6.
 IS 10914 (Part 5) : 1995
Automotive Vehicles - Pneumatic Tyres - Part 5 Method of Test for Diagonal and Radial Ply Tyres
7.
 IS 11157 : 1984
ISO 5995-1
Pneumatic tyres for mopeds - Diagonal ply
8.
 IS 11542 (Part 1) : 1985
ISO 6762
Reviewed In : 2007
Dimensions for tyre tube valve core chamber Part 1 Core chamber No 1 normal bore
9.
 IS 11542 (Part 2) : 1985
ISO 7442
Reviewed In : 2007
Dimensions for tyre tube valve core chamber Part 2 Core chamber No 2 large bore
10.
 IS 12151 : 1987
Motorcycles Tyres Diagonal Ply
11.
 IS 12441 (Part 1) : 1995
Automotive Vehicles - Pneumatic Tyres - Part 1 Passenger Car Tyres - Radial Ply
12.
 IS 12750 : 1989
ISO 8644 and IS 8645
Reviewed In : 2017
Automotive vehicles - Motorcycles and mopeds - Light alloy wheels methods of test and performance requirements
13.
 IS 13196 : 1991
Reviewed In : 2017
Automotive vehicles - Light alloy wheels for motorcycles - Specification
14.
 IS 13530 : 1992
Automotive tyres - Retreading materials - Mould cure - General requirements
15.
 IS 13532 : 1992
Automotive Tyres - Cushion Compound for Retreading - Mould Cure
16.
 IS 14777 : 2000
Reviewed In : 2010
Trucks and Bus Tyres - Methods Measuring Rolling Resistance
17.
 IS 8410 : 1977
Rim For Mopeds
18.
 IS 9438 : 1980
Reviewed In : 2014
Performance requirements and methods of tests for wheels rims for trucks
19.
 IS 9449 (Part 1) : 1980
ISO 4570 : Part 1
Reviewed In : 2009
Dimensions for Tyre Valve Threads - Part I Threads 5V1 5V2 6V1 and 8 V1
20.
 IS 9449 (Part 2) : 1985
ISO 4570 : Part 2
Reviewed In : 2007
Dimensions for Tyre Valve Threads - Part 2 Threads 9V1 1OV2 and 12V1
21.
 IS 9449 (Part 3) : 1985
ISO 4570 : Part 3
Reviewed In : 2007
Dimensions for Tyre Valve Threads - Part 3 Threads 10V1 15V1 17V1 and 20V1


Annexure-II :List of Indian Product Standards

SI. No.
IS No. & Year
Title
1.
 IS 10694 (Part 1) : 2009
Reviewed In : 2017
Automotive vehicles - Rims - General requirements Part 1 nomenclature designation marking and measurement First Revision
2.
 IS 10694 (Part 2) : 2009
Reviewed In : 2024
Automotive vehicles - Rims - General requirements Part 2 passenger car Second Revision
3.
 IS 10694 (Part 3) : 2009
Reviewed In : 2024
Automotive vehicles - Rims - General requirements Part 3 commercial vehicle rims Second Revision
4.
 IS 10694 (Part 4) : 1983
Reviewed In : 2024
General requirements for rims for automotive vehicles Part 4 scooter and scooter derivative rims
5.
 IS 10694 (Part 5) : 1987
Reviewed In : 2024
General requirements for rims for automotive vehicles Part 5 moped motorcycle and motorcycle derivative rims First Revision
6.
 IS 10694 (Part 6) : 2009
Reviewed In : 2024
Automotivevehicles - Rims - Generalrequirements Part 6 rims for agricultural tractors tillers and implements Second Revision
7.
 IS 10694 (Part 7) : 1983
Reviewed In : 2023
General requirements for rims for automotive vehicles Part 7 industrial truck rims
8.
 IS 12098 : 1987
Reviewed In : 2024
Specification for rim wheels for pneumatic tyres for animal drawn vehicles
9.
 IS 13098 : 2024
AUTOMOTIVE VEHICLES TUBES FOR PNEUMATIC TYRES SPECIFICATION second revision
10.
 IS 13154 : 2015

Reviewed In : 2020
Automotive vehicles - Tyres for agricultural vehicles and their trailers - Specification First Revision
11.
 IS 13444 : 2024
Animal Drawn Vehicles Pneumatic Tyres Specification First Revision
12.
 IS 13531 : 2005
Reviewed In : 2024
Automotive tyres - Tyre - Retreading materials for mould cure process First Revision
13.
 IS 15523 : 2018

Reviewed In : 2023
Automotive tyres - Precured patches for repairing cross ply radial tyres and inner tubes - Specification First Revision
14.
 IS 15524 : 2018

Reviewed In : 2023
Automotive vehicles - Retreading of tyres by the pre - Cured process - Specification First Revision
15.
 IS 15627 : 2022
Automotive Vehicles - Pneumatic Tyres for Two and Three - Wheeled Motor Vehicles - Specification First Revision
16.
 IS 15633 : 2022
Automotive vehicles - pneumatic tyres for passenger car vehicles - diagonal and radial ply
17.
 IS 15636 : 2022
Automotive vehicles - Pneumatic tyres for commercial vehicles - Diagonal and radial ply
18.
 IS 15704 : 2018

Reviewed In : 2023
Automotive vehicles - Retreaded pneumatic tyres for commercial vehicles - Specification First Revision
19.
 IS 15709 : 2018

Reviewed In : 2023
Automotive vehicles - Retreaded pneumatic tyres for passenger car - Specification First Revision
20.
 IS 16192 (Part 2) : 2014
Reviewed In : 2019
Automotive vehicles - Wheel rims for two and three wheeled vehicles Part 2 sheet metal wheel rims - Method of tests and requirements
21.
 IS 16192 (Part 3) : 2018

Reviewed In : 2024
Automotive vehicles - Wheel rims for two and three wheeled vehicles Part 3 Spoke Wheel Rims ---Method of tests and requirements
22.
 IS/ISO 18885-1 : 2017
ISO 18885-1:2017
TPMS SNAP-IN VALVES PART 1 IDENTIFICATION
23.
 IS/ISO 18885-2 : 2018
ISO 18885-2:2018
TPMS SNAP-IN VALVES PART 2 VALVE ENVIRONMENT
24.
 IS/ISO 20562 : 2014
ISO 20562 : 2014
Reviewed In : 2024
Tyre valves - Iso core chambers no 1 no 2 no 3 and no 4 First Revision
25.
 IS 9081 : 2024
Automotive Vehicles - Valves and Valve Accessories for Pneumatic Tyres - Specification Sixth Revision
26.
 IS 9168 : 2018

Reviewed In : 2024
Automotive vehicle - All rubber flaps for pneumatic tyres - Specification Second Revision
27.
 IS 9436 : 2018

Reviewed In : 2024
Performance requirements and methodsof test for wheels for passenger cars quadricycles and mini goods cariers First Revision
28.
 IS 9453 : 2014
Reviewed In : 2019
Valve caps for tyre tube valves for automotive vehicles - Specification Second Revision
29.
 IS 9643 : 1980
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Specification for non - Skid type chain assembly for tyres - Single type