Programme of work

  1. Home
  2. Programme of work

BUREAU OF INDIAN STANDARDS


Transport Engineering Department

Programme of Work




TED4 : Automotive Braking Systems, Vehicle Testing, Steering and performance Evaluation


  • Scope : a)Standardization of automotive braking systems, steering systems and their components, testing of vehicles as a whole for performance evaluation and road worthiness b)Co-ordination of work with ISO/TC 22 and its Sub-committees ISO/TC 22/SC 33, TC 22/SC 38 and ISO/TC 22/SC 39.
  • Liaison :
    ISO/TC 22/SC 34/WG 11 - Separator performance, laboratory and engine test methods for crankcase ventilation systems
    ISO/TC 22/SC 34/WG 14 - NOx reduction additive
    ISO/TC 221/WG 6 - Design using geosynthetics
    ISO/TC 229/JWG 1 - Terminology and nomenclature

Published Standards

SI. No.
IS No.
Title
Reaffirmation Details
No. of Amendments
Degree of Equivalence
1.
 IS 10278 : 2018

Reviewed In : 2023
Motorcycles - Measurement of maximum speed (Third Revision)
January, 2023
-
Indigenous
2.
 IS 10399 : 2022
AUTOMOTIVE VEHICLES- NOISE EMITTED BY STATIONARY VEHICLES-METHOD OF MEASUREMENT
-
Indigenous
3.
 IS 10407 : 1998
Reviewed In : 2018
Automotive vehicles - Two wheelers - Acceleration performance - Method of evaluation (Second Revision)
June, 2018
-
Indigenous
4.
 IS 10881 : 1994
Reviewed In : 2019
Automotive vehicles - Mopeds, scooters and motorcycles method of evaluation of fuel consumption (First Revision)
July, 2019
-
Indigenous
5.
 IS 11029 : 1984
Reviewed In : 2019
Specification for steering ball races for mopeds
July, 2019
-
Indigenous
6.
 IS 11422 : 2001
ISO 6726
Reviewed In : 2022
Terms and definitions of weights of two wheeled motor vehicles (First Revision)
August, 2022
-
Indigenous
7.
 IS 11432 : 2002
ISO 6725
Reviewed In : 2022
Terms and definitions of dimensions of two wheeled motor vehicles (First Revision)
August, 2022
-
Indigenous
8.
 IS 11739 : 1986
Reviewed In : 2021
Method of recording dust ingress in automotive vehicles
March, 2021
-
Indigenous
9.
 IS 11739 : 2024
METHOD OF RECORDING DUST INGRESS IN AUTOMOTIVE VEHICLES
-
Indigenous
10.
 IS 11825 : 2023
Automotive Vehicles � Method of Weighment (First Revision)
-
Indigenous
11.
 IS 11825 : 2023
Automotive Vehicles � Method of Weighment (First Revision)
-
Indigenous
12.
 IS 11825 : 1986
Reviewed In : 2021
Method of weighment of automotive vehicles
March, 2021
-
Indigenous
13.
 IS 11827 : 2008
Reviewed In : 2023
Automotive vehicles - Calibration of speedometer - Method of evaluation (Second Revision)
November, 2023
3
Indigenous
14.
 IS 11839 : 2024
Procedure for Splash Proof Testing of Automotive Vehicles (First Revision)
-
Indigenous
15.
 IS 11849 : 1986
Reviewed In : 2017
Method of determination of centre of gravity of automotive vehicles
March, 2017
1
Indigenous
16.
 IS 11850 : 1998
Reviewed In : 2021
Automotive vehicles - Odometer systems - Method of evaluation (First Revision)
March, 2021
1
Indigenous
17.
 IS 11851 : 1986
Reviewed In : 2017
Method of evaluation of acceleration of automotive vehicle
March, 2017
1
Indigenous
18.
 IS 11852 : 2019

Reviewed In : 2024
Automotive vehicles - Uniform provisions concerning the approval of vehicles of categories m2, m3, N and t with regard to braking (Third Revision)
May, 2024
2
Indigenous
19.
 IS 11865 : 2006
Reviewed In : 2022
Automotive vehicles - Method of conducting waterproofing test (First Revision)
August, 2022
-
Indigenous
20.
 IS 11877 : 2019

Reviewed In : 2024
Automotive Vehicles — Maximum Speed of Automotive Vehicles — Method of Evaluation ( First Revision )
May, 2024
-
Indigenous
21.
 IS 11921 : 2020
Automotive Vehicles — Method of Evaluation of Constant Speed Fuel Consumption ( Second Revision )
-
-
Indigenous
22.
 IS 11948 : 2010
Reviewed In : 2022
Automotive vehicles - Steering effort - Method of evaluation (Second Revision)
September, 2022
2
Indigenous
23.
 IS 12105 : 2014
Reviewed In : 2019
Methods of test for valves of automotive air brake systems
July, 2019
-
Indigenous
24.
 IS 12159 : 2018

Reviewed In : 2023
Method of evaluation of accuracy of parameters of steering geometry of automotive vehicles (Second Revision)
January, 2023
-
Indigenous
25.
 IS/ISO 12161 : 2006
ISO 12161 : 2006
Reviewed In : 2021
Road Vehicles - Endurance Braking Systems of Motor Vehicles and Towed Vehicles - Test Procedures
March, 2021
-
Identical under single numbering
26.
 IS 12218 : 2018

Reviewed In : 2024
Method of measurement of approach, departure and ramp angles of automotive vehicles (First Revision)
May, 2024
-
Indigenous
27.
 IS 12222 : 2011
Reviewed In : 2022
Automotive vehicles - Turning circle and maneuverability requirements (First Revision)
September, 2022
2
Indigenous
28.
 IS 12695 : 1989
Reviewed In : 2019
Automotive vehicles -Three wheeled vehicles - Determination of centre of gravity
July, 2019
-
Indigenous
29.
 IS 12793 : 2012
ISO 9130 : 2005
Reviewed In : 2021
Motorcycles - Measurement method for location of centre of gravity (First Revision)
March, 2021
-
Indigenous
30.
 IS 12821 : 2017

Reviewed In : 2022
Automotive vehicles - Braking system, tube connections - Dimensions (First Revision)
August, 2022
-
Indigenous
31.
 IS 12831 : 1989
Reviewed In : 2021
Automotive vehicles - Braking systems - Banjo bolt connections dimensions
March, 2021
-
Indigenous
32.
 IS 12832 : 2010
Reviewed In : 2021
Automotive vehicles - Interior noise - Method of measurement and requirements (First Revision)
March, 2021
1
Indigenous
33.
 IS 12851 : 2023
AUTOMOTIVE VEHICLES - HYDRAULIC BRAKE SYSTEMS TUBINGS - PERFORMANCE REQUIREMENTS
-
Indigenous
34.
 IS 12884 : 2015

Reviewed In : 2020
Automotive vehicles - Braking systems, rubber boots for brake wheel cylinders - Performance requirements (First Revision)
January, 2020
-
Indigenous
35.
 IS 13207 : 1991
Reviewed In : 2021
Automotive vehicles - Hydraulic braking systems - Wheel cylinder performance requirements
March, 2021
1
Indigenous
36.
 IS 13224 : 1991
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Automotive vehicles - Hydraulic braking systems - Master cylinder performance requirements
May, 2024
1
Indigenous
37.
 IS 13225 : 1992
Reviewed In : 2017
Automotive vehicles - hydraulic braking systems - Rubber cups - Specification
March, 2017
3
Indigenous
38.
 IS 13249 : 2014
Reviewed In : 2024
Automotive vehicles - Braking systems - Rubber seal for disc brake cylinder - Performance requirements (First Revision)
May, 2024
-
Indigenous
39.
 IS 13363 : 2017
Automotive vehicles - Air brake systems - Performance requirements for drain valves (First Revision)
-
-
Indigenous
40.
 IS 13453 : 1994
Reviewed In : 2019
Automotive vehicles - Braking systems - Method of test on brake dynamometer for two and three wheelers (First Revision)
July, 2019
1
Indigenous
41.
 IS 13476 : 2006
Reviewed In : 2022
Automotive vehicles - Mechanical steering gear - Methods of test (First Revision)
September, 2022
-
Indigenous
42.
 IS 13492 : 1992
Reviewed In : 2019
Automotive vehicles - Two wheelers - Method of evaluation of brake pedal strength requirements
July, 2019
1
Indigenous
43.
 IS 13603 : 2014
Reviewed In : 2019
Automotive vehicles - Air brake systems - Performance requirements for brake chamber (First Revision)
January, 2019
-
Indigenous
44.
 IS 13604 : 2014
Reviewed In : 2019
Automotive vehicles - Air brake systems - Performance requirements for dual brake valve (First Revision)
January, 2019
-
Indigenous
45.
 IS 13988 : 2014

Reviewed In : 2019
Automotive vehicles - Starting gradeability - Method of measurement and requirement (Second Revision)
September, 2019
-
Indigenous
46.
 IS 14269 : 2024
AUTOMOTIVE VEHICLES INTEGRAL POWER STEERING GEAR METHOD OF TEST (FIRST REVISION)
-
Indigenous
47.
 IS 14283 : 1995
Reviewed In : 2021
Automotive vehicles - Accelerator control systems - Safety requirements
March, 2021
-
Indigenous
48.
 IS 14382 : 2014
Reviewed In : 2019
Automotive vehicles - Speed limitation devices - Specification (First Revision)
September, 2019
-
Indigenous
49.
 IS 14557 : 1998
Reviewed In : 2021
Automotive vehicles - Cooling performance - Method of measurement
March, 2021
1
Indigenous
50.
 IS 14610 : 1999
Reviewed In : 2018
Automotivevehicles - Fuel consumptiononchassis dynamometer - Methodof measurement
June, 2018
-
Indigenous
51.
 IS 14664 : 2010
Reviewed In : 2021
Automotive vehicles - Performance requirements and testing procedure for braking system of two and three wheeled motor vehicles (First Revision)
March, 2021
5
Indigenous
52.
 IS 14785 : 2000
Reviewed In : 2021
Automotive vehicles - - Determination of road - Load constants by coast down test method
March, 2021
-
Indigenous
53.
 IS 15702 : 2006
Reviewed In : 2022
Automotive vehicles - Air brake hose - Specification
August, 2022
-
Indigenous
54.
 IS 15708 : 2006
ISO 6312
Reviewed In : 2022
Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies
December, 2022
-
Indigenous
55.
 IS 15783 : 2008
Reviewed In : 2023
Road vehicles - Brake control levers for two and three wheeled motor vehicles - Specification
November, 2023
-
Indigenous
56.
 IS 15986 : 2015
Reviewed In : 2020
Automotive vehicles - Uniform provisions concerning the approval of vehicles of categories m1 and n1 with regard to braking
April, 2020
1
Indigenous
57.
 IS 16137 (Part 1) : 2014
Reviewed In : 2019
Automotive vehicles - Methods of measurement of braking coefficient of road surfaces: Part 1 srtt method
January, 2019
-
Indigenous
58.
 IS 16137 (Part 2) : 2014
Reviewed In : 2019
Automotive vehicles - Methods of measurement of braking coefficient of road surfaces
January, 2019
-
Indigenous
59.
 IS 17128 (Part 1) : 2019

Reviewed In : 2024
Automotive vehicles ? vehicle dynamics test methods: Part 1 general test conditions
May, 2024
-
Indigenous
60.
 IS 17128 (Part 2) : 2019

Reviewed In : 2024
Automotive Vehicles ― Vehicle Dynamics Test Methods Part 2 Steady-State Test Procedure for Vehicle Stability and Controllability — Open-Loop and Closed Loop Test
January, 2024
-
Indigenous
61.
 IS 17128 (Part 3) : 2021
AUTOMOTIVE VEHICLES- VEHICLE DYNAMICS MEASUREMENTS TEST PROCEDURE PART-3: TRANSIENT RESPONSE TEST PROCEDURE OPEN LOOP AND CLOSED LOOP TEST
-
Indigenous
62.
 IS 17132 : 2019
Guideline Specifications for Replacement Brake Lining Assemblies and Drum Brake Linings for Power-Driven Vehicles and Their Trailers
1
Indigenous
63.
 IS 17871 : 2022
AUTOMOTIVE VEHICLE NOISE EMITTED BY STATIONARY VEHICLES METHOD OF MEASURMENT NON-ORIGINAL REPLACEMENT EXHAUST SILENCING SYSTEMS RESS FOR TWO AND THREE WHEELED VEHICLES
-
Indigenous
64.
 IS 2742 (Part 1) : 1994
Reviewed In : 2019
Automotive vehicles - Brake linings (Non - Rubberized): Part 1 specification (First Revision)
July, 2019
-
Indigenous
65.
 IS 2742 (Part 2) : 1999
Reviewed In : 2019
Automotive vehicles - Brake linings - Rubberised: Part 2 specification
July, 2019
-
Indigenous
66.
 IS 2742 (Part 3) : 1994
Reviewed In : 2019
Automotive vehicles - brake linings: Part 3 methods of test
July, 2019
1
Indigenous
67.
 IS 2742 (Part 4) : 1994
Reviewed In : 2019
Automotive vehicles - Brake linings: Part 4 coefficient of friction - method of test
July, 2019
1
Indigenous
68.
 IS 2742 (Part 5) : 1994
Reviewed In : 2019
Automotivevehicles - - Brakelinings: Part 5 internal shear strength - Method of test
July, 2019
-
Indigenous
69.
 IS 2742 (Part 6) : 2018
Automotive vehicles - Brake linings: Part 6 compressive strain test methods
-
Modified/Technically Equivalent
70.
 IS 2742 (Part 7) : 2018
Automotive vehicles - Brake linings: Part 7 shear test procedure for disc brake pad and drum brake shoe assemblies
-
Indigenous
71.
 IS 3028 (Part 1) : 2018

Reviewed In : 2023
Automotive vehicles - Noise emitted by moving vehicles - Specification and method of measurement: Part 1 L 2 category
November, 2023
1
Indigenous
72.
 IS 3028 (Part 2) : 2023
AUTOMOTIVE VEHICLES NOISE EMITTED BY MOVING VEHICLES SPECIFICATION AND METHOD OF MEASUREMENT PART 2 : OTHER THAN L2 AND L5 CATEGORY
1
Indigenous
73.
 IS 3028 (Part 3) : 2018

Reviewed In : 2023
Automotive vehicles - Noise emitted by moving vehicles - Specification and method of measurement: Part 3 L 5 category
November, 2023
1
Indigenous
74.
 IS 7065 : 1973
Reviewed In : 2021
Specification for steering wheels
March, 2021
1
Indigenous
75.
 IS 7079 : 2008
Reviewed In : 2024
Automotive vehicles - Brake hose assemblies forhydraulicbraking systems used with non - Petroleum base brake fluid specification (Third Revision)
May, 2024
2
Indigenous
76.
 IS 9211 : 2003
Reviewed In : 2024
Terms and definitions of weights of road vehicles other than 2 and 3 wheelers (Second Revision)
May, 2024
1
Indigenous
77.
 IS 9435 : 2004
ISO 612 (E)
Reviewed In : 2019
Terms and Definitions Relating to Dimensions of Road Vehicles Other than 2 and 3 Wheelers
July, 2019
1
Identical under dual numbering

Standards Under Develpoment

Projects Approved

SI. No.
Doc No
TITLE
No Records Found

Preliminary Draft Standards

SI. No.
Doc No
TITLE
No Records Found

Drafts Standards in WC Stage

SI. No.
Doc No
TITLE
1
TED 4 (25916)
AUTOMOTIVE VEHICLES VEHICLE DYNAMICS TEST METHODS PART 4 RIDE COMFORT MEASUREMENTS
2
TED 4 (25917)
AUTOMOTIVE VEHICLES-VEHICLE DYNAMICS TEST METHODS PART 5 SUBJECTIVE EVALUATION VEHICLE RIDE HANDLING STEERING

Draft Standards Completed WC Stage

SI. No.
Doc No
TITLE
1
TED 4 (24035)
Revision of: IS 14785:2000
AUTOMOTIVE VEHICLES DETERMINATION OF ROAD LOAD CONSTANTS BY COAST DOWN TEST METHOD First Revision
2
TED 4 (24250)
Automotive vehicles - Braking systems - Method of test on brake dynamometer for two and three wheelers First Revision Amendment - 2
3
TED 4 (24251)
Automotive vehicles - Performance requirements and testing procedure for braking system of two and three wheeled motor vehicles First Revision Amendment - 6
4
TED 4 (25616)
Revision of: IS 17132:2019
Specifications for Replacement Brake Lining Assemblies and Drum Brake Linings for Power-Driven Vehicles and Their Trailers
5
TED 4 (25687)
Revision of: IS 16137:2014
Automotive vehicles - Methods of measurement of braking coefficient of road surfaces Part 1 SRTT method
6
TED 4 (25689)
Revision of: IS 16137:2014
Automotive Vehicles Methods of Measurement of Braking Coefficient of Road Surfaces Part 2 Pendulum Method
7
TED 4 (25693)
Revision of: IS 2742:2018
AUTOMOTIVE VEHICLES BRAKE LININGS PART 7 SHEAR TEST PROCEDURE FORDISC BRAKE PAD AND DRUM BRAKESHOE ASSEMBLIES

Finalized Draft Indian Standard

SI. No.
Doc No
TITLE
No Records Found

Finalized Draft Indian Standards under Print

SI. No.
Doc No
TITLE
1
TED 4 (20101)
Automotive vehicles - Uniform provisions concerning the approval of vehicles of categories M1 and N1 with regard to braking Amendment - 2
2
TED 4 (20200)

Revision of: IS 11849:1986
METHOD OF DETERMINATION OF CENTRE OF GRAVITY OF AUTOMOTIVE VEHICLES First Revision
3
TED 4 (20385)

Revision of: IS 11851:1986
METHOD OF EVALUATION OF ACCELERATION OF AUTOMOTIVE VEHICLES
4
TED 4 (20394)

Revision of: IS 11850:1998
AUTOMOTIVE VEHICLES - ODOMETER SYSTEMS - METHOD OF EVALUATION
5
TED 4 (22750)

Revision of: IS 13225:1992
Automotive Vehicles Hydraulic Braking Systems Rubber Cups Specification
6
TED 4 (22782)

Revision of: IS 13207:1991
AUTOMOTIVE VEHICLES - HYDRAULIC BRAKING SYSTEMS - WHEEL CYLINDER PERFORMANCE REQUIREMENTS
7
TED 4 (22789)

Revision of: IS 14283:1995
AUTOMOTIVE VEHICLES - ACCELERATOR CONTROL SYSTEMS - SAFETY REQUIREMENTS
8
TED 4 (22790)

Revision of: IS 14557:1998
AUTOMOTIVE VEHICLES - COOLING PERFORMANCE -METHOD OF MEASUREMENT FIRST REVISION
9
TED 4 (22791)

Revision of: IS 12831:1989
Automotive Vehicles Braking Systems Banjo Bolt Connections Dimensions First Revision
10
TED 4 (24252)
Automotive vehicles - Brake linings Non - Rubberized Part 1 specification Amendment - 1
11
TED 4 (24253)
Automotive vehicles - Brake linings - Rubberised Part 2 specification Amendment - 1
12
TED 4 (24254)
Automotive vehicles - brake linings Part 3 methods of test Amendment - 1
13
TED 4 (24255)
Automotive vehicles - Brake linings Part 4 coefficient of friction - Method of test Amendment - 1
14
TED 4 (24256)
Automotivevehicles - - Brakelinings Part 5 internal shear strength - Method of test Amendment - 1
15
TED 4 (24257)
Automotive vehicles - Brake linings Part 7 shear test procedure for disc brake pad and drum brake shoe assemblies Amendment - 1


Aspect Wise Report

 
 Product:   18
 Code of Practices :    2
 Methods of Test :   46
 Terminology :   4
 Dimensions :   2
 System Standard :   0
 Safety Standard :   1
 Others :    0
 Service Specification :    0
 Process Specification :    0
 Unclassified :    0
 


Annexure-I :List of Indian Standards Withdrawn/Superseded

SI. No.
IS No.
Title
1.
 IS 10043 : 1994
Automotive Vehicles - Symbols For Controls Indicators And Telltales For Scooters And Motorcycles
2.
 IS 10289 : 1982
Brake Control Levers for Mopeds
3.
 IS 10376 : 1982
Reviewed In : 1995
Performance requirements of braking systems for mopeds
4.
 IS 10413 : 1983
Reviewed In : 1990
Method Of Measurement Of Maximum Speed Of Scooters And Motorcycles
5.
 IS 10479 : 1993
Code of practice for field control of moisture and compaction of soils for embankment and subgrade
6.
 IS 10841 : 1984
Front brake control lever for scooters and motorcycles
7.
 IS 10944 : 1983
Reviewed In : 1990
Method of measurement of fuel consumption of mopeds
8.
 IS 11571 : 1986
Reviewed In : 1995
Terms and definitions of dimensions of scooters
9.
 IS 11716 : 1986
Reviewed In : 1995
Performance Evaluation Of Braking System Of Scooters And Motorcycles
10.
 IS 11852 : 2013
Automotive Vehicles - Uniform Provisions Concerning the Approval of Vehicles of Categories M N and T with Regard to Braking
11.
 IS 11852 (Part 1) : 2001
Reviewed In : 2010
Automotive Vehicles - Brakes And Braking Systems Part 1 Terminology
12.
 IS 11852 (Part 2) : 2001
Reviewed In : 2012
Automotive Vehicles - Brakes and Braking Systems - Part 2 General Functions and Features
13.
 IS 11852 (Part 3) : 2001
Reviewed In : 2012
Automotive vehicles - brakes and braking systems Part 3 Performance requirements and evaluation
14.
 IS 11852 (Part 4) : 2001
Reviewed In : 2010
Automotive Vehicles - Brakes and Braking Systems - Part 4 Compressed Air and Air Assisted Brakes - Special Requirements
15.
 IS 11852 (Part 5) : 2001
ISO 3853
Reviewed In : 2012
Automotive Vehicles - Brakes And Braking Systems Part 5 Compressed Air And Air Assisted Brakes - Pressure Test Connections
16.
 IS 11852 (Part 6) : 2001
Reviewed In : 2012
Automotive Vehicles - Brakes And Braking Systems Part 6 Vacuum Braking System - Special Requirements
17.
 IS 11852 (Part 7) : 2001
Reviewed In : 2012
Automotive Vehicles - Brakes and Braking Systems - Part 7 Inertia Dynamometer Test Method for Brake Lining
18.
 IS 11852 (Part 8) : 2001
Reviewed In : 2012
Automotive Vehicles - Brakes and Braking Systems - Part 8 Test Procedures
19.
 IS 11852 (Part 9) : 2003
Reviewed In : 2008
Automotive Vehicles - Brakes and Braking Systems - Part 9 Requirements for Vehicles Equipped with Anti-Lock Braking Systems
20.
 IS 12055 : 1987
Reviewed In : 1992
Method of Measurement of Acceleration of Mopeds
21.
 IS 13493 : 1992
Reviewed In : 2007
Automotive vehicles - Two wheelers - Method of evalation of brake lever strength requirements
22.
 IS 13494 : 1992
Reviewed In : 2007
Automotive Vehicles - Air Brake Systems - Performance Requirements for Unloader Valves
23.
 IS 13507 : 1992
Reviewed In : 2007
Automotive Vehicles - Self Centering - Method of Test
24.
 IS 13670 : 1992
Automotive vehicles - three wheelers - brake performance requirements
25.
 IS 14121 : 1995
Automotive vehicles - braking systems - test procedure for two and three wheelers
26.
 IS 3028 : 1998
ISO/DIS 362
Reviewed In : 2018
Automotive vehicles - Noise emitted by moving vehicles - Method of measurement Second Revision
27.
 IS 9212 : 1979
Reviewed In : 2002
Recommendations for Pressures in Brakes Lines of Road Vehicles and Braking efficiency
28.
 IS 9268 : 1979
Braking terminology for road vehicles
29.
 IS 9655 : 1994
Automotive vehicles - Type location and functions of controls - Mopeds
30.
 IS 9714 : 1993
Automotive vehicles - symbols for controls indicators and telltales for mopeds
31.
 IS 9726 : 1984
Reviewed In : 1995
Terms and definitions of weights of mopeds
32.
 IS 9727 : 1981
Reviewed In : 1995
Terms and definitions of dimensions for mopeds


Annexure-II :List of Indian Product Standards

SI. No.
IS No. & Year
Title
1.
 IS 11029 : 1984
Reviewed In : 2019
Specification for steering ball races for mopeds
2.
 IS 12222 : 2011
Reviewed In : 2022
Automotive vehicles - Turning circle and maneuverability requirements First Revision
3.
 IS 12851 : 2023
AUTOMOTIVE VEHICLES - HYDRAULIC BRAKE SYSTEMS TUBINGS - PERFORMANCE REQUIREMENTS
4.
 IS 12884 : 2015

Reviewed In : 2020
Automotive vehicles - Braking systems rubber boots for brake wheel cylinders - Performance requirements First Revision
5.
 IS 13207 : 1991
Reviewed In : 2021
Automotive vehicles - Hydraulic braking systems - Wheel cylinder performance requirements
6.
 IS 13224 : 1991
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Automotive vehicles - Hydraulic braking systems - Master cylinder performance requirements
7.
 IS 13225 : 1992
Reviewed In : 2017
Automotive vehicles - hydraulic braking systems - Rubber cups - Specification
8.
 IS 13249 : 2014
Reviewed In : 2024
Automotive vehicles - Braking systems - Rubber seal for disc brake cylinder - Performance requirements First Revision
9.
 IS 13363 : 2017
Automotive vehicles - Air brake systems - Performance requirements for drain valves First Revision
10.
 IS 13603 : 2014
Reviewed In : 2019
Automotive vehicles - Air brake systems - Performance requirements for brake chamber First Revision
11.
 IS 13604 : 2014
Reviewed In : 2019
Automotive vehicles - Air brake systems - Performance requirements for dual brake valve First Revision
12.
 IS 14382 : 2014
Reviewed In : 2019
Automotive vehicles - Speed limitation devices - Specification First Revision
13.
 IS 15702 : 2006
Reviewed In : 2022
Automotive vehicles - Air brake hose - Specification
14.
 IS 15783 : 2008
Reviewed In : 2023
Road vehicles - Brake control levers for two and three wheeled motor vehicles - Specification
15.
 IS 2742 (Part 1) : 1994
Reviewed In : 2019
Automotive vehicles - Brake linings Non - Rubberized Part 1 specification First Revision
16.
 IS 2742 (Part 2) : 1999
Reviewed In : 2019
Automotive vehicles - Brake linings - Rubberised Part 2 specification
17.
 IS 7065 : 1973
Reviewed In : 2021
Specification for steering wheels
18.
 IS 7079 : 2008
Reviewed In : 2024
Automotive vehicles - Brake hose assemblies forhydraulicbraking systems used with non - Petroleum base brake fluid specification Third Revision