BUREAU OF INDIAN STANDARDS
Programme of Work
MED28 : Mechanical Vibration And Shock Condition Monitoring
- Scope : a) Formulation of standards on mechanical vibration and shock including: i) Terminology ii) Excitation by sources, such as machines, and vibration and shock testing devices; iii) Elimination, reduction and control, especially by balancing, isolation and damping iv) Measurement and human evaluation of shock and vibration exposure v) Methods and means of measurement and calibration vi) Methods of testing b) Co-ordination of work with ISO/TC 108, Mechanical vibration and shock
-
Liaison :ISO/TC 108 - Mechanical vibration, shock and condition monitoring - Participating (P)
ISO/TC 108/SC 2 - Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures - Participating (P)
ISO/TC 108/SC 4 - Human exposure to mechanical vibration and shock - Participating (P)
ISO/TC 108/SC 5 - Condition monitoring and diagnostics of machine systems - Participating (P)
ISO/TC 108/SC 6 - Vibration and shock generating systems - Participating (P)
ISO/TC 6/TG 2 - Identification of Organizations - Environmental issues
ISO TC 6/WG 16 - Lignin Analyses
ISO TC 6/WG 3 - Optical properties
|
IS/ISO 10055 : 1996 Reviewed In : 2022 |
Mechanical vibration - Vibration testing requirements for shipboard equipment and machinery components
|
September, 2022
|
-
|
Identical under single numbering
|
|
|
IS/ISO 10326-1 : 2016 ISO 10326-1 : 2016 Reviewed In : 2021 |
Mechanical vibration - Laboratory method for evaluating vehicle seat vibration: Part 1 basic requirements
|
February, 2021
|
-
|
Identical under single numbering
|
|
|
IS/ISO 10815 : 2016 ISO 10815 : 2016 Reviewed In : 2021 |
Mechanical vibration - Measurement of vibration generated internally in railway tunnels by the passage of trains
|
February, 2021
|
-
|
Identical under single numbering
|
|
|
IS/ISO 10816-4 : 2009 Reviewed In : 2019 |
Mechanical vibration - Evaluation of machine vibration by measurements on non - Rotating parts: Part 4 gas turbine sets with fluid - Film bearings
|
April, 2019
|
-
|
Identical under single numbering
|
|
|
IS 11726 : 2017 ISO 2954 : 2012 Reviewed In : 2022 |
Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity (First Revision)
|
January, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 13276 (Part 1) : 2000 ISO 2631-1 Reviewed In : 2020 |
Mechanical vibration and shock - Evaluation of human exposure to whole body vibration: Part 1 general requirements (First Revision)
|
January, 2020
|
1
|
Identical under dual numbering
|
|
|
IS 13281 : 1999 ISO 5805 Reviewed In : 2022 |
Mechanical vibration and shock affecting man - Vocabulary (First Revision)
|
March, 2022
|
-
|
Identical under dual numbering
|
|
|
IS/ISO 13373-1 : 2002 Reviewed In : 2021 |
Condition monitoring and diagnostics of machines - Vibration condition monitoring: Part 1 general procedures
|
February, 2021
|
-
|
Identical under single numbering
|
|
|
IS/ISO 13373-2 : 2016 ISO 13373-2 : 2016 Reviewed In : 2021 |
Condition Monitoring and Diagnostics of Machines - Vibration Condition Monitoring Part 2 Processing Analysis and Presentation of Vibration Data (First Revision)
|
February, 2021
|
-
|
Identical under single numbering
|
|
|
IS 14732 : 2000 ISO 6897 Reviewed In : 2020 |
Guidelines for the evaluation of the response of occupants of fixed structures, especially buildings and off - Shore structures, to low - Frequency horizontal motion (0.063 To 1 Hz)
|
January, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 14736 (Part 1) : 2017 ISO 7626-1 : 2011 Reviewed In : 2021 |
Mechanical vibration and shock - Experimental determination of mechanical mobility: Part 1 basic terms and definitions, and transducer specifications (First Revision)
|
September, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 14736 (Part 2) : 2018 ISO 7626-2 : 2015 Reviewed In : 2022 |
Mechanical Vibration and Shock - Experimental Determination of Mechanical Mobility Part 2 Measurements Using Single - Point Translation Excitation with an Attached Vibration Exciter ( First Revision)
|
September, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 14817 (Part 3) : 2017 ISO 10816-3 : 2009 Reviewed In : 2022 |
Mechanical vibration - Evaluation of machine vibration by measurements on non - Rotating parts: Part 3 industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ (First Revision)
|
January, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 14817 (Part 6) : 2004 ISO 10816-6 : 1995 Reviewed In : 2022 |
Mechanical vibration - Evaluation of machine vibration by measurements on non - Rotating parts: Part 6 reciprocating machines with power rating above 100 kW
|
September, 2022
|
1
|
Identical under dual numbering
|
|
|
IS 14882 : 2000 ISO 10112 Reviewed In : 2021 |
Damping materials - Graphical presentation of the complex modulus
|
February, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 14883 : 2022 ISO 5348: 2021 |
Mechanical Vibration and Shock Mechanical Mounting of Accelerometers First Revision
|
-
|
Identical under dual numbering
|
||
|
IS 14907 : 2001 ISO 10227 Reviewed In : 2021 |
Human/human surrogate impact (Single Shock) testing and evaluation - Guidance on technical aspects
|
February, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 14910 : 2001 ISO 8727 : 1997 Reviewed In : 2021 |
Mechanical vibration and shock - Human exposure - Biodynamic coordinate systems
|
February, 2021
|
1
|
Identical under dual numbering
|
|
|
IS 14916 : 2016 ISO 10068 : 2012 Reviewed In : 2021 |
Mechanical Vibration and Shock — Mechanical Impedance of the Human Hand-Arm System at the Driving Point ( First Revision )
|
February, 2021
|
-
|
Identical under dual numbering
|
|
|
IS/ISO 14963 : 2003 Reviewed In : 2020 |
Mechanical vibration and shock - Guidelines for dynamic tests and investigations on bridges and viaducts
|
January, 2020
|
-
|
Identical under single numbering
|
|
|
IS 14979 : 2001 ISO 9996 Reviewed In : 2021 |
Mechanical vibration and shocks - Disturbance to human activity and performance - Classification
|
February, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 15593 (Part 1) : 2005 ISO/TS 10811-1 Reviewed In : 2021 |
Mechanical vibration and shock - Vibration and shock in buildings with sensitive equipment: Part 1 measurement and evaluation
|
February, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 15593 (Part 2) : 2005 ISO/TS 10811-2 Reviewed In : 2021 |
Mechanical vibration and shock - Vibration and shock in buildings with sensitive equipment: Part 2 classification
|
February, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 17918 : 2023 |
Mechanical vibration and shock - Resilient Mounting Systems -Technical information to be exchanged for the application of isolation systems
|
-
|
Not Equivalent
|
||
|
IS/ISO 18431-1 : 2005 ISO 18431-1 : 2005 Reviewed In : 2019 |
Mechanical vibration and shock - Signal processing: Part 1 general introduction
|
April, 2019
|
1
|
Identical under single numbering
|
|
|
IS/ISO2028 :-2 : 2008 ISO 20283-2 : 2008 Reviewed In : 2022 |
Mechanical vibration - Measurement of vibration on ships: Part 2 measurement of structural vibration
|
September, 2022
|
-
|
Identical under single numbering
|
|
|
IS/ISO 20283-5 : 2016 ISO 20283-5:2016 Reviewed In : 2022 |
Mechanical vibration Measurement of vibration on ships Part 5: Guidelines for measurement evaluation and reporting of vibration with regard to habitability on passenger and merchant ships Adoption of ISO 20283-5 : 2016
|
September, 2022
|
-
|
Identical under dual numbering
|
|
|
IS/ISO 2041 : 2018 ISO 2041 : 2018 Reviewed In : 2018 |
Mechanical Vibration, Shock and Condition Monitoring — Vocabulary ( First Revision )
|
-
|
-
|
Identical under single numbering
|
|
|
IS/ISO 20816-1 : 2016 ISO 20816-1 : 2016 Reviewed In : 2021 |
Mechanical vibration - Measurement and evaluation of machine vibration: Part 1 general guidelines
|
February, 2021
|
-
|
Identical under single numbering
|
|
|
IS/ISO 20816-2 : 2017 ISO 20816-2 : 2017 |
Mechanical Vibration — Measurement and Evaluation of Machine Vibration Part 2 Land-Based Gas Turbines, Steam Turbines and Generators in Excess of 40 MW, with Fluid-Film Bearings and Rated Speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min ( First Revision )
|
-
|
Identical under single numbering
|
||
|
IS/ISO 20816-3 : 2022 ISO 20816-3 : 2022 |
MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF MACHINE VIBRATION PART 3 INDUSTRIAL MACHINERY WITH A POWER RATING ABOVE 15 KW AND OPERATING SPEEDS BETWEEN 120 R/MIN AND 30 000 R/MIN
|
-
|
Identical under single numbering
|
||
|
IS/ISO 20816-4 : 2018 ISO 20816-4 : 2018 |
Mechanical Vibration - Measurement and Evaluation of Machine Vibration Part 4 Gas Turbines in Excess of 3 MW, with Fluid-Film Bearings (First Revision)
|
-
|
Identical under single numbering
|
||
|
IS/ISO 20816-5 : 2018 ISO 20816-5 : 2018 |
Mechanical Vibration — Measurement and Evaluation of Machine Vibration Part 5 Machine Sets in Hydraulic Power Generating and Pump-Storage Plants ( First Revision )
|
-
|
Identical under single numbering
|
||
|
IS/ISO 21289 : 2008 ISO 21289 : 2008 Reviewed In : 2022 |
Mechanical vibration and shock - Parameters to be specified for the acquisition of vibration data
|
January, 2022
|
-
|
Identical under single numbering
|
|
|
IS/ISO 21940-2 : 2017 ISO 21940-2 : 2017 |
Mechanical Vibration — Rotor Balancing Part 2 Vocabulary ( First Revision )
|
-
|
Identical under single numbering
|
||
|
IS/ISO 21940-11 : 2016 ISO 21940-11 : 2016 Reviewed In : 2021 |
Mechanical vibration - Rotor balancing: Part 11 procedures and tolerances for rotors with rigid behaviour
|
February, 2021
|
1
|
Identical under single numbering
|
|
|
IS/ISO 21940-12 : 2016 ISO 21940-12 : 2006 Reviewed In : 2021 |
Mechanical vibration - Rotor balancing: Part 12 procedures and tolerances for rotors with flexible behaviour
|
February, 2021
|
-
|
Identical under single numbering
|
|
|
IS/ISO 21940-13 : 2012 ISO 21940-13 : 2012 Reviewed In : 2019 |
Mechanical vibration - Rotor balancing: Part 13 criteria and safeguards for in - Situ balancing for medium and large rotors
|
April, 2019
|
-
|
Identical under single numbering
|
|
|
IS/ISO 21940-14 : 2012 ISO 21940-14 : 2012 Reviewed In : 2019 |
Mechanical vibration - Rotor balancing: Part 14 procedures for assessing balance errors
|
April, 2019
|
1
|
Identical under single numbering
|
|
|
IS/ISO 21940-21 : 2022 ISO 21940-21 : 2022 |
Mechanical Vibration — Rotor Balancing Part 21 Description and Evaluation of Balancing Machines (First Revision)
|
-
|
Identical under single numbering
|
||
|
IS/ISO 21940-23 : 2012 ISO 21940-23 : 2012 Reviewed In : 2019 |
Mechanical vibration - Rotor balancing: Part 23 enclosures and other protective measures for the measuring station of balancing machines
|
April, 2019
|
-
|
Identical under single numbering
|
|
|
IS/ISO 21940-31 : 2013 ISO 21940-31 : 2013 Reviewed In : 2019 |
Mechanical vibration - Rotor balancing: Part 31 susceptibility and sensitivity of machines to unbalance
|
April, 2019
|
-
|
Identical under single numbering
|
|
|
IS/ISO 21940-32 : 2012 ISO 21940-32 : 2012 Reviewed In : 2019 |
Mechanical vibration - Rotor balancing: Part 32 shaft and fitment key convention
|
April, 2019
|
-
|
Identical under single numbering
|
|
|
IS/ISO 2631-2 : 2003 Reviewed In : 2022 |
Mechanical vibration and shock - Evaluation of human exposure to whole body vibration: Part 2 vibration in buildings (1 Hz To 80 Hz)
|
September, 2022
|
-
|
Identical under single numbering
|
|
|
IS/ISO 4866 : 2010 ISO 4866 Reviewed In : 2022 |
Mechanical vibration and shock - Vibration of fixed structures - Guidelines for the measurement of vibrations and evaluation of their effects on structures
|
September, 2022
|
-
|
Identical under single numbering
|
|
|
IS/ISO 5344 : 2004 Reviewed In : 2022 |
Electrodynamic vibration generating systems - Performance characteristics (First Revision)
|
September, 2022
|
1
|
Identical under single numbering
|
|
|
IS/ISO 5349-1 : 2001 Reviewed In : 2022 |
Mechanical vibration - Measurement and evaluation of human exposure to handtransmitted vibration: Part 1 general requirements (First Revision)
|
September, 2022
|
-
|
Identical under single numbering
|
|
|
IS/ISO 5349-2 : 2001 Reviewed In : 2022 |
Mechanical vibration - Measurement and evaluation of human exposure to handtransmitted vibration: Part 2 practical guidance for measurement at the workplace (First Revision)
|
September, 2022
|
1
|
Identical under single numbering
|
|
|
IS/ISO 5982 : 2019 ISO 5982 : 2019 |
Mechanical Vibration and Shock — Range of Idealized Values to Characterize Human Biodynamic Response Under Whole-Body Vibration ( First Revision )
|
-
|
-
|
Identical under single numbering
|
|
|
IS/ISO 6070 : 2019 ISO 6070 : 2019 |
Auxiliary Tables for Vibration Generators — Methods of Describing Equipment Characteristics ( First Revision )
|
-
|
Identical under single numbering
|
||
|
IS/ISO 7626-5 : 2019 ISO 7626-5 : 2019 Reviewed In : 2019 |
Mechanical Vibration and Shock — Experimental Determination of Mechanical Mobility Part 5 Measurements Using Impact Excitation with an Exciter Which is Not Attached to The Structure ( First Revision )
|
-
|
-
|
Identical under single numbering
|
|
|
IS/ISO 7919-3 : 2009 ISO7919-3 : 2009 Reviewed In : 2022 |
Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts: Part 3 coupled industrial machines
|
September, 2022
|
-
|
Identical under single numbering
|
|
|
IS/ISO 8041-1 : 2017 ISO 8041 : 2017 |
Human Response to Vibration Measuring Instrumentation Part 1 General Purpose Vibration Meters ( First Revision )
|
-
|
Identical under single numbering
|
||
|
IS/ISO 8042 : 1988 Reviewed In : 2021 |
Shock and vibration measurements - Characteristics to be specified for seismic pick - Ups
|
February, 2021
|
-
|
Identical under single numbering
|
|
|
IS/ISO 8608 : 2016 ISO 8608 : 2016 Reviewed In : 2021 |
Mechanical vibration - Road surface profiles - Reporting of measured data
|
February, 2021
|
-
|
Identical under single numbering
|
|
|
IS/ISO 8626 : 1989 Reviewed In : 2022 |
Servo - Hydraulic test equipment for generating vibration method of describing characteristics
|
January, 2022
|
1
|
Identical under single numbering
|
| No Records Found |
| No Records Found |
| No Records Found |
| No Records Found | ||
| No Records Found | ||
| No Records Found |
|
|
IS/ISO 10816-2 : 2001 Reviewed In : 2019 |
Mechanical vibration - Evaluation of machine vibration by measurements on non - Rotating parts Part 2 land - Based steam turbines and generators in excess of 50 mw with normal operating speeds of 1 500 rlMin 1 800 rlMin 3 000 rlMin and 3 600 rlMin |
|
|
IS/ISO 11342 : 1998 Reviewed In : 2017 |
Mechanical vibration - Methods and criteria for the mechanical balancing of flexible rotors |
|
|
IS 11717 : 2000 ISO 2041 Reviewed In : 2010 |
Vocabulary on Vibration and Shock |
|
|
IS 11723 (Part 1) : 1992 |
Mechanical Vibration - Balance Quality Requirements Of Rigid Rotors Part 1 Determination Of Permissible Residual Unbalance |
|
|
IS 11724 : 1985 Reviewed In : 1995 |
Basis For Specifying The Rules In Evaluating The Mechanical Vibration Of Machines In The Operation Range 10 To 200 Rev s |
|
|
IS 11725 : 1985 |
Measurement and Evaluation of the Vibration Severity of Certain Rotating Electrical Machinery with shaft Heght Between 80 and 400 mm |
|
|
IS 11727 : 1985 |
Measurement And Evaluation Of Vibration Severity In Situ Of Large Rotating Machines With Speed Range From 10 To 200 Rev s |
|
|
IS 13274 : 1992 |
Mechanical vibration - Balancing - Vocabulary |
|
|
IS 13275 : 1992 |
Description and Evaluation of Field Balancing Equipment |
|
|
IS 13276 (Part 2) : 1992 |
Evaluation of Human Exposure to Whole-body Vibration - Part 2 Continuous and Shock-induced Vibration in Buildings 1 Hz to 80 Hz |
|
|
IS 13276 (Part 3) : 1992 ISO 2631-2 |
Evaluation of Human Exposure to Whole-body Vibration - Part 2 Vibration In Building 1hz To 80 Hz |
|
|
IS 13277 : 1992 |
Balancing Machine - Description and Evaluation |
|
|
IS 13278 : 1999 ISO 3719 Reviewed In : 2010 |
Mechanical Vibration - Symbols for Balancing Machines and Associated Instrumentation |
|
|
IS 13279 : 1992 Reviewed In : 1997 |
Criteria for Evaluating Flexible Rotor Balance |
|
|
IS 13280 : 1992 Reviewed In : 1997 |
Mechanical balancing of flexible rotors |
|
|
IS 14259 : 1995 Reviewed In : 2005 |
Vibration and shock - Isolators - Procedures for specifying characteristics |
|
|
IS 14280 : 1995 ISO 8821 Reviewed In : 2016 |
Mechanical vibration - Balancing - Shaft and fitment key convention |
|
|
IS 14728 : 1999 |
Code for the Measurement and Reporting of Shipboard Vibration Data |
|
|
IS 14729 : 1999 |
Code for the Measurement and Reporting of Local Vibration Data of Ship Structures and Equipment |
|
|
IS 14730 : 2000 |
Vibration and Shock - Mechanical Driving Point Impedance of the Human Body |
|
|
IS 14731 : 1999 ISO 6070 Reviewed In : 2020 |
Auxiliary Tables for vibration generators - Methods of describing equipment characteristics |
|
|
IS 14733 : 1999 |
Mechanical Vibration and Shock - Guidelines for the Overall Evaluation of Vibration in Merchant Ships |
|
|
IS 14734 : 1999 |
Balancing Machines - Enclosures and Other Safety Measures |
|
|
IS 14737 : 1999 |
Human Response to Vibration - Measuring Instrumentation |
|
|
IS 14773 (Part 1) : 2000 ISO 7919-1 Reviewed In : 2016 |
Mechanical Vibration of Non-reciprocating Machines - Measurements on Rotating Shafts and Evaluation Criteria - Part 1 General Guidelines |
|
|
IS 14773 (Part 2) : 2000 |
Mechanical Vibration of Non-reciprocating Machines - Measurements on Rotating Shafts and Evaluation Criteria - Part 2 Large Land-based Steam Turbine Generator Sets |
|
|
IS 14773 (Part 3) : 2000 ISO 7919-3 Reviewed In : 2010 |
Mechanical Vibration of Non-Reciprocating Machines - Measurements on Rotating Shafts and Evaluation Criteria - Part 3 Coupled Industrial Machines |
|
|
IS 14773 (Part 4) : 2000 ISO 7919-4 Reviewed In : 2010 |
Mechanical Vibration of Non-reciprocating Machines - Measurements on Rotating Shafts and Evaluation Criteria - Part 4 Gas Turbine Sets |
|
|
IS 14773 (Part 5) : 2001 |
Mechanical Vibration of Non-Reciprocating Machines - Measurements on Rotating Shafts and Evaluation Criteria - Part 5 Machine Sets in Hydraulic Power Generating and Pumping Plants |
|
|
IS 14817 (Part 1) : 2000 ISO 10816-1:1995 Reviewed In : 2018 |
Mechanical vibration - Evaluation of machine vibration - By measurements on non - Rotating parts Part 1 general guidelines |
|
|
IS 14817 (Part 2) : 2017 ISO 10816-2 : 2009 |
Mechanical vibration - Evaluation of machine vibration by measurements on non - Rotating parts Part 2 land - Based steam turbines and generators in excess of 50 mw with normal operating speeds of 1 500 r min 1 800 r min 3 000 r min and 3 600 r min |
|
|
IS 14817 (Part 4) : 2004 ISO 10816-4 Reviewed In : 2019 |
Mechanical vibration - Evaluation of machine vibration by measurements on non - Rotating parts Part 4 gas turbines driven sets excluding aircraft derivatives |
|
|
IS 14817 (Part 5) : 2004 ISO 10816-5 Reviewed In : 2018 |
Mechanical vibration - Evaluation of machine vibration by measurements on non - Rotating parts Part 5 machine sets in hydrualic power generating pumping and pumping plants |
|
|
IS 14884 : 2000 ISO 4866 Reviewed In : 2010 |
Mechanical Vibration and Shock - Vibration of Buildings - Guidelines for the Measurement of Vibrations and Evaluation of Their Effects on Buildings |
|
|
IS 14908 : 2001 |
Mechanical Vibration and Shock - Mechanical Transmissiblity of the Human Body in the Z Direction |
|
|
IS 14917 (Part 1) : 2001 ISO 10326-1 Reviewed In : 2016 |
Mechanical Vibration - Laboratory Method for Evaluating Vehicle Seat Vibration - Part 1 Basic Requirements |
|
|
IS 14918 : 2001 |
Mechanical Vibrations - Method and Criteria for the Mechanical Balancing of Flexible Rotors |
|
|
IS 15591 : 2005 ISO 8569 Reviewed In : 2021 |
Mechanical vibration and shock - Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings |
|
|
IS 15592 : 2005 ISO 8608 Reviewed In : 2016 |
Mechanical vibration - Road surfface profiles - Reporting of measured data |
|
|
IS 15594 : 2005 ISO 10815 Reviewed In : 2016 |
Mechanical Vibration - Measurement of Vibration Generated intervally in Railway Tunnels by Passage of the Trains |
|
|
IS/ISO 1925 : 2001 Reviewed In : 2018 |
Mechanical vibration - Balancing - Vocabulary |
|
|
IS/ISO 1940-1 : 2003 Reviewed In : 2018 |
Mechanical vibration - Balance quality requirements for rotors in a constant Rigid state Part 1 Specifications and verfication of balance tolerances |
|
|
IS/ISO 1940-2 : 1997 Reviewed In : 2015 |
Mechanical Vibration - Balance Quality Requirements of Rigid Rotors |
|
|
IS/ISO 2017-2 : 2007 Reviewed In : 2015 |
Mechanical Vibration and Shock - Resilient Mounting Systems Part 2 Technical Information to be Exchanged for the Application of Vibration Isolation Associated with Railway Systems |
|
|
IS/ISO 20806 : 2004 ISO 20806:2004 Reviewed In : 2016 |
Mechanical Vibration - Criteria and Safeguards for the In-Situ Balancing of medium and Large Rotors |
|
|
IS/ISO 2953 : 1999 Reviewed In : 2013 |
Mechanical vibration - Balancing machines - Description and evaluation |
|
|
IS/ISO 5349 : 1986 Reviewed In : 2019 |
Mechanical vibration - Guidelines for the measurement and the assessment of human exposure to hand transmitied vibration |
|
|
IS/ISO 6954 : 2000 Reviewed In : 2013 |
Mechanical vibration - Guidelines for the measurement reporting and evaluation of vibration with regard to habitability of passenger and merchant ships |
|
|
IS/ISO 7475 : 2002 Reviewed In : 2018 |
Mechanical vibration - Balancing machines - Englosures and other protective measures for the measuring station |
|
|
IS/ISO 7919-2 : 2009 Reviewed In : 2019 |
Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts Part 2 land - Based steam turbines and generators in excess of 50 mw with normal operating speeds of 1 500 r min 1 800 r min 3 000 r min and 3 600 r min First Revision |
|
|
IS/ISO 7919-4 : 2009 ISO 7919-4 Reviewed In : 2018 |
Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts Part 4 gas turbine sets with fluid - Film bearings |
|
|
IS/ISO 7919-5 : 2005 Reviewed In : 2018 |
Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts Part 5 machine sets in hydraulic power generating and pumping plants |
|
|
IS/ISO 8041 : 2005 Reviewed In : 2018 |
Human response to vibration - Measuring instrumentation |
|
|
IS/ISO 8568 : 2007 ISO 8568 |
Mechanical shock - Testing machines - Characteristics and performance |