Programme of work

BUREAU OF INDIAN STANDARDS

Petroleum, Coal and Related Products Department

Programme of Work

PCD12 : Plastics

Scope : To formulate Indian Standards for specifications for thermosetting and thermoplastic resins-bonded and moulding materials; natural and synthetic polymers, synthetic resin bonded laminates thermoplastic films and sheets, plasticizers cellular plastics, finished plastic articles, composites and reinforced plastics (excluding sanitary wares and plastic pipes for water supply and plastic packaging containers), and natural and synthetic adhesives (excluding for plywood industry and electrical tapes).
Liaison :

ISO/TC 6/WG 7 - Cores for reels of paper
ISO/TC 61 - Plastics - Participating (P)
ISO/TC 61/SC 13 - Composites and reinforcement fibres - Participating (P)
ISO/TC 61/SC 14 - Environmental aspects - Participating (P)
ISO/TC 61/SC 2 - Mechanical behavior - Participating (P)
ISO/TC 61/SC 2/WG 6 - Dimensions of test specimens
ISO/TC 61/SC 2/WG 7 - Fracture and fatigue behavior
ISO/TC 61/SC 5/WG 5 - Viscosity
ISO/TC 61/SC 5/WG 8 - Thermal analysis
ISO/TC 61/SC 6/WG 7 - Basic standards
ISO/TC 61/SC 9 - Thermoplastic materials - Participating (P)
ISO/TC 61/SC 9/WG 6 - Polyolefins
ISO TC 61/SC 11 - Products - Participating (P)
ISO TC 61/SC 1 - Terminology - Participating (P)
ISO TC 61/SC 4 - Burning behaviour - Participating (P)
ISO TC 61/SC 5 - Physical-chemical properties - Participating (P)
ISO TC 61/SC 6 - Ageing, chemical and environmental resistance - Participating (P)
ISO TC 61/SC 10 - Cellular plastics - Participating (P)
ISO TC 61/SC 12 - Thermosetting materials - Participating (P)

Published Standards

SI. No.	IS No.	Title	Reaffirmation Details	No. of Amendments	Degree of Equivalence
1.	IS 10142 : 1999 Reviewed In : 2018	Polystyrene (crystal and high impact) for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification (First Revision)	August, 2018	-	Indigenous
2.	IS 10146 : 1982 Reviewed In : 2018	Specification for polyethylene for its safe use in contact with foodstuffs, pharmaceuticals and drinking water	August, 2018	1	Indigenous
3.	IS 10148 : 2023	Positive list of constituents of polyvinyl chloride (pvc) and its copolymers in contact with foodstuffs, pharmaceuticals and drinking water (First Revision)		-	Indigenous
4.	IS 10149 : 1982 Reviewed In : 2018	Positive list of constituents of styrene polymers in contact with foodstuffs, pharmaceuticals and drinking water	August, 2018	1	Indigenous
5.	IS 10151 : 2019	Polyvinyl chloride (pvc) and its copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification (First Revision)	-	1	Indigenous
6.	IS 10734 : 1983 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for case, vanity, moulded body	March, 2024	-	Indigenous
7.	IS 10815 : 1984 Reviewed In : 2018	Code of practice for the application of adhesives in footwear industry	August, 2018	-	Indigenous
8.	IS 10889 : 2004 Reviewed In : 2016	High density polyethylene films (First Revision)	May, 2016	1	Indigenous
9.	IS 10910 : 1984 Reviewed In : 2018	Specification for polypropylene and its copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water	August, 2018	1	Indigenous
10.	IS 10951 : 2020	Specification for polypropylene (pp) materials for moulding and extrusion (Second Revision)	-	2	Indigenous
11.	IS 11434 : 2023	Ionomer resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification (First Revision)		-	Indigenous
12.	IS 11434 : 1985 Reviewed In : 2018	Specification for ionomer resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water z	August, 2018	-	Indigenous
13.	IS 11435 : 2024	Positive list of constituents of ionomer resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water (First Revision)		-	Indigenous
14.	IS 11704 : 1986 Reviewed In : 2018	Specification for ethylene acrylic acid (Eaa) copolymers for their safe use in contact with food - Stuffs, pharmaceuticals and drinking water	August, 2018	-	Indigenous
15.	IS 11704 : 2023	Ethylene acrylic acid (eaa) copolymers for their safe use in contact with food-stuffs, pharmaceuticals and drinking water - Specification (First Revision)		-	Indigenous
16.	IS 11705 : 2024	Positive list of constituents of ethylene/acrylic acid (eaa) copolymers for their safe use in contact with foodstuffs, pharmaceuticals and drinking water (First Revision)		-	Indigenous
17.	IS 11988 : 1986 Reviewed In : 2017	Specification for hot seal patches	February, 2017	-	Indigenous
18.	IS 12087 : 1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for suitcase for air and submarine crew	March, 2024	-	Indigenous
19.	IS 12210 : 2023	Caprolactam - Specification (First Revision)		-	Indigenous
20.	IS 12210 : 1987 Reviewed In : 2016	Specification for caprolactam	May, 2016	4	Indigenous
21.	IS 12247 : 1988 Reviewed In : 2020	Specification for nylon-6 polymer for its safe use in contact with foodstuffs pharmaceuticals and drinking water	July, 2020	1	Indigenous
22.	IS 12248 : 1988 Reviewed In : 2020	Positive list of constituents of nylon-6 polymer for its safe use in contact with foodstuffs, pharmaceuticals and drinking water	July, 2020	1	Indigenous
23.	IS 12252 : 2017 Reviewed In : 2022	Polyalkylene terephthalates (pet and pbt), their copolymers and list of constituents in raw materials and end products for their safe use in contact with foodstuffs and pharmaceuticals (First Revision)	March, 2022	-	Indigenous
24.	IS 12830 : 1989 Reviewed In : 2020	Rubber based adhesives for fixing pvc tiles to cement - Specification	July, 2020	-	Indigenous
25.	IS 12994 : 1990 Reviewed In : 2020	Epoxy adhesives, room temperature curing, general purpose - Specification	July, 2020	-	Indigenous
26.	IS 1300 : 1994 Reviewed In : 2020	Phenolic moulding materials - Specification (Third Revision)	July, 2020	-	Indigenous
27.	IS 13193 : 1992 Reviewed In : 2018	Polyalkylene terephthalates (pet and pbt) for moulding and extrusion - Specification	August, 2018	2	Indigenous
28.	IS 13199 : 1991 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Adhestves - Guidelines for surface preparation for adhesive bonding	March, 2024	-	Indigenous
29.	IS 13217 : 1991 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Thermoplastics fumigation covers	March, 2024	-	Indigenous
30.	IS 13254 : 1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Animal glue for match industry - Specification	March, 2024	-	Indigenous
31.	IS 13255 : 1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Adhesive - Liquid - For use on high speed flap gumming and embossed envelope machines - Specification	March, 2024	-	Indigenous
32.	IS 13262 : 1992 Reviewed In : 2024	Pressure sensitive adhesive tapes with plastic base - Specification	March, 2024	1	Indigenous
33.	IS 13410 : 1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Glass reinforced polyester sheet moulding compounds(smc) - Specification	March, 2024	-	Indigenous
34.	IS 13411 : 1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Glass reinforced polyester dough moulding compounds - Specification	March, 2024	-	Indigenous
35.	IS 13449 : 1992 Reviewed In : 2024	Positive list of constituents of ethylene vinyl acetate (eva) copolymers in contact with foodstuffs, pharmaceuticals and drinking water	March, 2024	-	Indigenous
36.	IS 13463 : 2022	Polyamide 6 materials for moulding and extrusion - Specification (First Revision)		-	Indigenous
37.	IS 13464 : 1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Polyamide (nylon 66) materials for moulding and extrusion - Specification	March, 2024	1	Indigenous
38.	IS 13576 : 1992 Reviewed In : 2024	Ethylene methacrylic acid (emaa) copolymers and terpolymers for their safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification	March, 2024	-	Indigenous
39.	IS 13577 : 1992 Reviewed In : 2024	Positive list of constituents of ethylene methacrylic acid (emaa) copolymers and terpolymers in contact with foodstuffs, pharmaceuticals and drinking water	March, 2024	-	Indigenous
40.	IS 13601 : 1993 Reviewed In : 2024	Ethylene vinyl acetate (eva) copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification	March, 2024	1	Indigenous
41.	IS 13653 : 1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Anaerobic jointing compounds for use in liquefied petroleum gas appliances and installations - Specifications	March, 2024	1	Indigenous
42.	IS 13960 : 1994 Reviewed In : 2020	Thermoplastic strappings - Specification	July, 2020	-	Indigenous
43.	IS 14182 : 1994 Reviewed In : 2020	Solvent cement for use with unplasticized polyvinyl chloride plastic pipe and fittings - Specifications	July, 2020	2	Indigenous
44.	IS 14421 : 1997 Reviewed In : 2024	Plasticizer esters - Specification	March, 2024	1	Indigenous
45.	IS 14425 : 1997 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Guide for manufacture of glass reinforced polyster resin mouldings	March, 2024	-	Indigenous
46.	IS 14426 : 1997 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Chlorinated paraffins (cp) - Specification	January, 2024	-	Indigenous
47.	IS 14434 : 1998 Reviewed In : 2020	Polycarbonate moulding and extrusion materials - Specification	July, 2020	1	Indigenous
48.	IS 14434 : 2023	Polycarbonate moulding and extrusion materials - Specification (First Revision)		-	Indigenous
49.	IS 14443 : 1997 Reviewed In : 2018	Polycarbonate sheets - Specification	August, 2018	-	Indigenous
50.	IS 14500 : 1998 Reviewed In : 2020	Linear low-density polyethylene (lldpe) films - Specification	July, 2020	1	Indigenous
51.	IS 14534 : 2023	Plastics - Recovery and recycling of plastics waste - Guidelines (Second Revision)		-	Indigenous
52.	IS 14535 : 1998 Reviewed In : 2020	Recycled plastics for the manufacturing of products - Designation	July, 2020	1	Indigenous
53.	IS 1461 : 1984 Reviewed In : 2018	Specification for plastic buttons (thermosetting) (Second Revision)	August, 2018	1	Indigenous
54.	IS 14611 : 2016	Multilayered cross laminated sheets/tarpaulins/covers/agricultural films - Specification (First Revision)	-	4	Indigenous
55.	IS 14635 (Part 1) : 2020	Fluoropolymer dispersions and moulding and extrusion materials : Part 1 designation system (First Revision)		-	Indigenous
56.	IS 14635 (Part 2) : 2020	Fluoropolymer dispersions and moulding and extrusion materials : Part 2 preparation of test specimens and determination of properties (First Revision)		-	Indigenous
57.	IS 14643 : 1999 Reviewed In : 2020	Unsintered polytetrafluoroethylene (ptfe) tape for thread sealing applications - Specification	July, 2020	1	Indigenous
58.	IS 14752 : 2000 Reviewed In : 2020	Melamine formaldehyde resins to improve wet strength of paper - Specification	July, 2020	-	Indigenous
59.	IS 14753 : 1999 Reviewed In : 2020	Polymethyl methacrylate (pmma) (acrylic) sheets	July, 2020	-	Indigenous
60.	IS 14971 : 2001 Reviewed In : 2020	Polycarbonate resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification	July, 2020	-	Indigenous
61.	IS 14972 : 2001 Reviewed In : 2020	Positive list of constituents of polycarbonate resins in contact with foodstuffs, pharmaceuticals and drinking water	July, 2020	-	Indigenous
62.	IS 14995 : 2001 Reviewed In : 2016	Stretch cling films - Specification	May, 2016	-	Indigenous
63.	IS 14996 : 2001 Reviewed In : 2020	Positive list of constituents of modified poly (phenylene oxide) (ppo) in contact with foodstuffs, pharmaceuticals and drinking water	July, 2020	-	Indigenous
64.	IS 14997 : 2001 Reviewed In : 2020	Modified poly (phenylene oxide) (ppo) resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification	July, 2020	-	Indigenous
65.	IS 14998 : 2001 Reviewed In : 2020	Positive list of constituents of melamine-formaldehyde resins in contact with foodstuffs, pharmaceuticals and drinking water	July, 2020	-	Indigenous
66.	IS 14999 : 2001 Reviewed In : 2020	Melamine-formaldehyde resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification	July, 2020	-	Indigenous
67.	IS 15225 : 2002 Reviewed In : 2024	Chlorinated polyvinyl chloride compounds used for pipes and fittings - Specifications	March, 2024	-	Indigenous
68.	IS 15226 : 2002 Reviewed In : 2024	Rigid polyvinyl chloride (pvc) compounds - Specification	March, 2024	1	Indigenous
69.	IS 15559 : 2004 Reviewed In : 2020	Polyester strapping - Specification	July, 2020	1	Indigenous
70.	IS 15621 : 2005 Reviewed In : 2020	Tetrabromobisphenol-a - Specification	July, 2020	-	Indigenous
71.	IS 15623 : 2005 Reviewed In : 2020	Melamine (2, 4, 6 triamino 1, 3, 5 triazine) - Specification	July, 2020	1	Indigenous
72.	IS 16154 : 2014 Reviewed In : 2024	Water soluble film - Specification	May, 2024	-	Indigenous
73.	IS 16459 : 2016 ISO 17557 : 2003 Reviewed In : 2021	Plastics - Film and sheeting - Cast polypropylene (pp) films	April, 2021	1	Identical under dual numbering
74.	IS 16460 : 2023 ISO 17555 : 2021	Plastics - Film and sheeting - Biaxially oriented polypropylene (pp) films (First Revision)		-	Identical under dual numbering
75.	IS 16591 (Part 1) : 2016 ISO 18263-1 : 2015 Reviewed In : 2021	Plastics - Mixtures of polypropylene (pp) and polyethylene (pe) recyclate derived from pp and pe used for flexible and rigid consumer packaging : Part 1 designation system and basis for specification	April, 2021	1	Identical under dual numbering
76.	IS 16591 (Part 2) : 2016 ISO 18263-2 : 2015 Reviewed In : 2021	Plastics - Mixtures of polypropylene (pp) and polyethylene (pe) recyclate derived from pp and pe used for flexible and rigid consumer packaging : Part 2 preparation of test specimens and determination of properties	April, 2021	-	Identical under dual numbering
77.	IS 16621 : 2017	Positive list of constituents of polyethylene and polypropylene in contact with foodstuffs, pharmaceuticals and drinking water		-	Indigenous
78.	IS 16630 (Part 1) : 2018	Plastics - Post-consumer poly (ethylene terephthalate) (pet) bottle recyclates : Part 1 designation system and basis for specifications		-	Not Equivalent
79.	IS 16630 (Part 2) : 2017	Plastics - Post-consumer poly (ethylene terephthalate) (pet) bottle recyclates : Part 2 preparation of test specimens and determination of properties		-	Not Equivalent
80.	IS 16738 : 2018	Positive list of constituents for polypropylene, polyethylene and their copolymers for its safe use in contact with foodstuffs and pharmaceuticals		2	Indigenous
81.	IS 16864 : 2018 Reviewed In : 2024	Polycarbonate protective shield - Specification	March, 2024	-	Indigenous
82.	IS 17077 (Part 1) : 2022	Plastics - Acrylonitrile-butadienestyrene (abs) moulding and extrusion materials : Part 1 designation system and specifications (First Revision)		-	Indigenous
83.	IS 17077 (Part 2) : 2020	Plastics - Acrylonitrile-butadiene-styrene (abs) moulding and extrusion materials : Part 2 preparation of test specimens and determination of properties		-	Indigenous
84.	IS/ISO 17088 : 2021 ISO 17088 : 2021	Compostable plastics - Specification (Second Revision)		-	Identical under single numbering
85.	IS 17216 : 2019 Reviewed In : 2024	Polyethylene mulch films for agriculture and horticulture - Specification	March, 2024	1	Indigenous
86.	IS 17230 : 2019 Reviewed In : 2024	Plastic carry case for storage, transportation and carriage of voter verifiable paper audit trail (vvpat) printer - Specification	March, 2024	-	Indigenous
87.	IS 17397 (Part 1) : 2022	Plastics - Thermoplastic polyurethanes for moulding and extrusion : Part 1 designation system and specifications (First Revision)		-	Indigenous
88.	IS 17397 (Part 2) : 2020 ISO 16365-2 : 2014	Plastics - Thermoplastic polyurethanes for moulding and extrusion : Part 2 preparation of test specimens and determination of properties		-	Identical under dual numbering
89.	IS 17397 (Part 3) : 2020	Plastics - Thermoplastic polyurethanes for moulding and extrusion : Part 3 distinction between ether and ester polyurethanes by determination of the ester group content		-	Identical under dual numbering
90.	IS 17658 : 2021	Polyvinyl chloride (pvc) homopolymers - Specification		-	Indigenous
91.	IS 17659 : 2021	Polyester polyol - Specification		-	Indigenous
92.	IS 17892 (Part 1) : 2022	Heat-activated adhesive coated polymeric tape - Specification : Part 1 for seam sealing on ppe suits		-	Indigenous
93.	IS 17899 T : 2022	Assessment of biodegradability of plastics in varied conditions		-	Indigenous
94.	IS 17899 T : 2024	Assessment of Biodegradability of Plastics in Varied Conditions (Revised)		-	Indigenous
95.	IS 17917 : 2022	Pressure sensitive adhesive films for general industrial applications - Specification		-	Indigenous
96.	IS 17927 (Part 1) : 2022	Plastics - Ethylene-vinyl acetate (eva) moulding and extrusion materials : Part 1 designation system and specification		-	Indigenous
97.	IS 17927 (Part 2) : 2022 ISO 21301-2 : 2019	Plastics - Ethylene-vinyl acetate (eva) moulding and extrusion materials : Part 2 preparation of test specimens and determination of properties		-	Identical under dual numbering
98.	IS 17928 (Part 1) : 2022	Plastics - Poly (methyl methacrylate) (pmma) moulding and extrusion materials : Part 1 designation system and specifications		-	Indigenous
99.	IS 17928 (Part 2) : 2022 ISO 24026-2 : 2020	Plastics - Poly (methyl methacrylate) (pmma) moulding and extrusion materials : Part 2 preparation of test specimens and determination of properties		-	Identical under dual numbering
100.	IS 17988 : 2022	Chlorinated polyvinyl chloride (cpvc) resin - Specification		-	Indigenous
101.	IS 17990 : 2022	Hexamethyldisilazane - Specification		-	Indigenous
102.	IS 17992 : 2022	Superabsorbent polymer - Sodium polyacrylate resin for hygiene products - Specification		-	Indigenous
103.	IS 18103 : 2022	Plastics - Polyacrylamide materials - Designation system and specification		-	Indigenous
104.	IS 1843 : 1963 Reviewed In : 2018	Specification for nylon monofilaments	August, 2018	-	Indigenous
105.	IS 1843 : 2023	Nylon monofilaments - Specification (First Revision)		-	Indigenous
106.	IS 2036 : 1995 Reviewed In : 2020	Phenolic laminated sheets - Specification (Second Revision)	July, 2020	1	Indigenous
107.	IS 2046 : 1995 Reviewed In : 2020	Decorative thermosetting synthetic resin bonded laminated sheets - Specification (Second Revision)	July, 2020	1	Indigenous
108.	IS 2076 : 1981 Reviewed In : 2024	Specification for unsupported flexible polyvinyl chloride sheeting (First Revision)	March, 2024	1	Indigenous
109.	IS 2249 : 1984 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for adhesives (liquid) for leather-beltings (First Revision)	March, 2024	-	Indigenous
110.	IS 2257 : 1989 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Paper adhesives, liquid gum and office paste type - Specification (Third Revision)	March, 2024	2	Indigenous
111.	IS 2267 (Part 2) : 2024 ISO 24022-1 : 2020	Polystyrene (ps) moulding and extrusion materials : Part 2 preparation of test specimens and determination of properties (Third Revision)		-	Identical under dual numbering
112.	IS 2267 (Part 1) : 2024 ISO 24022-1 : 2020	Polystyrene (ps) moulding and extrusion materials : Part 1 designation system and basis for specification (Third Revision)		-	Identical under dual numbering
113.	IS 2508 : 2016	Polyethylene films and sheets - Specification (Third Revision)	March, 2022	3	Indigenous
114.	IS 2543 : 1995 Reviewed In : 2020	Cellulose secondary acetate materials for moulding and extrusion - Specification (First Revision)	July, 2020	-	Indigenous
115.	IS 2560 : 1979 Reviewed In : 2018 Reaffirmed but not taken up for revision	Specification for rubber-based adhesives for tubes, non-curing (First Revision)	August, 2018	-	Indigenous
116.	IS 2561 : 1963 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for rubber-based adhesives for the automobile industry	March, 2024	1	Indigenous
117.	IS 2562 : 1979 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for rubber-based adhesives for tyres and tubes, curing (First Revision)	March, 2024	-	Indigenous
118.	IS 2828 : 2019 ISO 472 : 2013	Plastics - Vocabulary (Second Revision)	-	-	Identical under dual numbering
119.	IS 2886 : 1991 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Labelling paste for paper labels - Specification (First Revision)	March, 2024	-	Indigenous
120.	IS 3389 : 1994 ISO 2112 Reviewed In : 2020	Urea-formaldehyde moulding materials - Specification (First Revision)	July, 2020	1	Indigenous
121.	IS 3434 : 1984 Reviewed In : 2020	Glossary of terms for adhesives and pressure sensitive adhesive tapes (First Revision)	July, 2020	-	Indigenous
122.	IS 3447 : 1993 Reviewed In : 2020	Shellac jointing compound - Specification (First Revision)	July, 2020	1	Indigenous
123.	IS 3669 : 1994 ISO 2112 Reviewed In : 2020	Melamine-formaldehyde moulding materials - Specification (First Revision)	July, 2020	1	Indigenous
124.	IS 3687 : 1987 Reviewed In : 2018	Specification for pressure sensitive adhesive cloth tapes (Second Revision)	August, 2018	-	Indigenous
125.	IS 3693 : 1966 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for plastic spectacle frames	January, 2024	-	Indigenous
126.	IS 3730 : 1988 Reviewed In : 2020	Specification for high density polyethylene bucket (First Revision)	July, 2020	-	Indigenous
127.	IS 3988 : 1981 Reviewed In : 2016	Specification for guar gum (First Revision)	May, 2016	1	Indigenous
128.	IS 3988 : 2023	Guar gum - Specification (Second Revision)		-	Indigenous
129.	IS 4185 : 1989 Reviewed In : 2020 Reaffirmed but not taken up for revision	Adhesive paper tapes - Specification (First Revision)	July, 2020	-	Indigenous
130.	IS 4663 : 1968 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for permanent rubber-based adhesives for footwear industry	March, 2024	3	Indigenous
131.	IS 4761 : 1968 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for unsupported pvc rainwear	March, 2024	2	Indigenous
132.	IS 5210 : 1995 Reviewed In : 2020	High impact polystyrene sheet - Specification (First Revision)	July, 2020	1	Indigenous
133.	IS 5322 : 1988 Reviewed In : 2020	Specification for high density polyethylene wash-bowls (First Revision)	July, 2020	-	Indigenous
134.	IS 5378 : 1994 Reviewed In : 2020	Polyethylene cane - Specification (First Revision)	July, 2020	-	Indigenous
135.	IS 6307 : 2023	Rigid pvc sheets - Specification (Second Revision)		-	Indigenous
136.	IS 6367 : 1971 Reviewed In : 2018	Specification for dextrin for adhesive industry	August, 2018	-	Indigenous
137.	IS 6746 : 1994 Reviewed In : 2020	Unsaturated polyester resin systems - Specification (First Revision)	July, 2020	-	Indigenous
138.	IS 7166 : 1985 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for cellulose secondary acetate flakes (First Revision)	March, 2024	-	Indigenous
139.	IS 7328 : 2020	Specification for polyethylene material for moulding and extrusion (Third Revision)	-	2	Indigenous
140.	IS 7393 : 1974 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for adhesive, bitumen emulsion	March, 2024	-	Indigenous
141.	IS 7395 : 1989 Reviewed In : 2016	Gum ghatti - Specification (First Revision)	May, 2016	-	Indigenous
142.	IS 7569 : 1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for cast acrylic sheets for use in luminaires (Second Revision)	March, 2024	-	Indigenous
143.	IS 9220 : 1979 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for tableware made of melamine plastics	March, 2024	-	Indigenous
144.	IS 9766 : 1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Flexible pvc compounds - Specification (First Revision)	March, 2024	-	Indigenous
145.	IS 9827 : 1981 Reviewed In : 2018	Specification for shoe adhesive, natural rubber latex base	August, 2018	-	Indigenous
146.	IS 9827 : 2023	Shoe adhesive - Natural rubber latex base - Specification (First Revision)		-	Indigenous
147.	IS 9833 : 2018	List of colourants for use in plastics in contact with foodstuffs and pharmaceuticals (Second Revision)	-	1	Indigenous
148.	IS 9843 : 1991 Reviewed In : 2024	Code of practice for use of adhesives for packaging (First Revision)	March, 2024	-	Indigenous
149.	IS 9848 : 1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for briefcases, plastic body (First Revision)	March, 2024	-	Indigenous

Standards Under Develpoment

Projects Approved

SI. No.	Doc No	TITLE
No Records Found

Preliminary Draft Standards

SI. No.	Doc No	TITLE
No Records Found

Drafts Standards in WC Stage

SI. No.	Doc No	TITLE
1	PCD 12 (24950)	ULTRAMARINE BLUE FOR PLASTICS SPECIFICATION
2	PCD 12 (25844) Revision of: IS 14635:2020	FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS PART 1 DESIGNATION SYSTEM
3	PCD 12 (25847) Revision of: IS 14635:2020	FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS PART 2 PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
4	PCD 12 (25982)	Plastics - Acrylonitrile-butadienestyrene abs moulding and extrusion materials Part 1 designation system and specifications First Revision Amendment - 1
5	PCD 12 (25983)	Plastics - Acrylonitrile-butadiene-styrene abs moulding and extrusion materials Part 2 preparation of test specimens and determination of properties Amendment - 1

Draft Standards Completed WC Stage

SI. No.	Doc No	TITLE
1	PCD 12 (19386) Revision of: IS 12252:2017	POLYALKYLENE TEREPHTHALATE PET AND PBT THEIR COPOLYMERS AND LIST OF CONSTITUENTS IN RAW MATERIALS AND END PRODUCTS FOR THEIR SAFE USE IN CONTACT WITH FOODSTUFFS AND PHARMACEUTICALS
2	PCD 12 (20688) Revision of: IS 6367:1971	DEXTRIN FOR ADHESIVE INDUSTRY SPECIFICATION
3	PCD 12 (20689) Revision of: IS 7395:1989	GUM GHATTI SPECIFICATION
4	PCD 12 (20690) Revision of: IS 10815:1984	CODE OF PRACTICE FOR THE APPLICATION OF ADHESIVES IN FOOTWEAR INDUSTRY
5	PCD 12 (22835)	ALUMINIUM FOIL TAPES APPLICATION IN HVAC INDUSTRY AND WHITE GOODS SPECIFICATION
6	PCD 12 (24832)	PRESSURE SENSITIVE ADHESIVE PSA BASED PAPER TAPES FOR PACKAGING SPECIFICATION
7	PCD 12 (24845)	POLYCARBONATE LATHI SPECIFICATION
8	PCD 12 (24846) Revision of: IS 3687:1987	GENERAL PURPOSE PRESSURE SENSITIVE ADHESIVE CLOTH TAPES SPECIFICATION
9	PCD 12 (24847) Revision of: IS 10142:1999	POLYSTYRENE CRYSTAL AND HIGH IMPACT FOR ITS SAFE USE IN CONTACT WITH FOODSTUFFS PHARMACEUTICALS AND DRINKING WATER SPECIFICATION
10	PCD 12 (24848)	PLASTICS INDUSTRIAL COMPOSTABLE PLASTIC DRINKING STRAWS
11	PCD 12 (24849)	PLASTICS INDUSTRIAL COMPOSTABLE PLASTIC SHOPPING BAGS
12	PCD 12 (24850)	PLASTICS SOIL BIODEGRADABLE MATERIALS FOR MULCH FILMS FOR USE IN AGRICULTURE AND HORTICULTURE REQUIREMENTS AND TEST METHODS REGARDING BIODEGRADATION ECOTOXICITY AND CONTROL OF CONSTITUENTS
13	PCD 12 (24899)	Amndment No 3 to IS 16738 2018 Positive list of constituents for polypropylene polyethylene and their copolymers for its safe use in contact with foodstuffs and pharmaceuticals
14	PCD 12 (24900)	Amendment No 2 to IS 9833 2018 List of colourants for use in plastics in contact with foodstuffs and pharmaceuticals Second Revision
15	PCD 12 (24901)	Plastics - Vocabulary Second Revision Amendment - 1
16	PCD 12 (25312)	POLYCARBONATE MOULDING AND EXTRUSION MATERIALS SPECIFICATION Amendment - 1
17	PCD 12 (25645) Revision of: IS 13193:1992	THERMOPLASTIC POLYESTERS PET AND PBT FOR MOULDING AND EXTRUSION SPECIFICATION
18	PCD 12 (25646) Revision of: IS 2046:1995	DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 1 INTRODUCTION AND GENERAL INFORMATION
19	PCD 12 (25647) Revision of: IS 2046:1995	DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 2 DETERMINATION OF PROPERTIES
20	PCD 12 (25648) Revision of: IS 2046:1995	DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 3 CLASSIFICATION AND SPECIFICATIONS FOR LAMINATES LESS THAN 2 MM THICK AND INTENDED FOR BONDING TO SUPPORTING SUBSTRATES
21	PCD 12 (25649) Revision of: IS 2046:1995	DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 4 CLASSIFICATION AND SPECIFICATIONS FOR COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER
22	PCD 12 (25650) Revision of: IS 2046:1995	DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 5 CLASSIFICATION AND SPECIFICATIONS FOR FLOORING GRADE LAMINATES LESS THAN 2 MM THICK INTENDED FOR BONDING TO SUPPORTING SUBSTRATES
23	PCD 12 (25651) Revision of: IS 2046:1995	DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 6 CLASSIFICATION AND SPECIFICATIONS FOR EXTERIOR-GRADE COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER
24	PCD 12 (25652) Revision of: IS 2046:1995	DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 7 CLASSIFICATION AND SPECIFICATIONS FOR DESIGN LAMINATES
25	PCD 12 (25653) Revision of: IS 2046:1995	DECORATIVE THERMOSETTING SYNTHETIC RESIN BONDED LAMINATED SHEETS SPECIFICATION PART 8 CLASSIFICATION AND SPECIFICATIONS FOR ALTERNATIVE CORE LAMINATES

Finalized Draft Indian Standard

SI. No.	Doc No	TITLE
1	PCD 12 (23279)	SOLVENT CEMENTS FOR CHLORINATED POLY VINYL CHLORIDE CPVC PLASTIC PIPE AND FITTINGS
2	PCD 12 (23782) Revision of: IS 16630:2018	PLASTIC RECYCLATES FROM POST - CONSUMER BOTTLES AND OTHER FORMS OF POLY ETHYLENE TEREPHTHALATE PET PART 1 DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
3	PCD 12 (23783) Revision of: IS 16630:2017	PLASTICS RECYCLATES FROM POST-CONSUMER BOTTLES AND OTHER FORMS OF POLY ETHYLENE TEREPHTHALATE PET PART 2 PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES

Finalized Draft Indian Standards under Print

SI. No.	Doc No	TITLE
1	PCD 12 (22324)	Testing and characterization of mechanically recycled polypropylene PP and polyethylene PE for intended use in different plastics processing techniques
2	PCD 12 (22646) Revision of: IS 1461:1984	Plastic buttons Thermosetting - Specification Third Revision
3	PCD 12 (22647) Revision of: IS 2508:2016	Polyethylene films and sheets - Specification Fourth Revision
4	PCD 12 (22672) Revision of: IS 14995:2001	Stretch cling films - Specification First Revision
5	PCD 12 (22673) Revision of: IS 14611:2016	Multilayered cross laminated sheets tarpaulins covers agricultural films - Specification Second revision
6	PCD 12 (22834) Revision of: IS 12247:1988	Nylon 6 polymer for its safe use in contact with foodstuffs pharmaceuticals and drinking water - Specification First Revision
7	PCD 12 (25686)	Chlorinated polyvinyl chloride compounds used for pipes and fittings - Specifications Amendment - 1
8	PCD 12 (25989)	Specification for polypropylene pp materials for moulding and extrusion Second Revision Amendment - 3

Total Published Standards:140 Total Standards Under development : 41

Aspect Wise Report

Product:	111
Code of Practices :	4
Methods of Test :	8
Terminology :	2
Dimensions :	0
System Standard :	0
Safety Standard :	11
Others :	4
Service Specification :	0
Process Specification :	0
Unclassified :	0

Total :140

Annexure-I :List of Indian Standards Withdrawn/Superseded

SI. No.	IS No.	Title
1.	IS 10141 : 2001 Reviewed In : 2016	Positive List of Constituents of Polyethylene in Contact with Foodstuffs Pharmaceuticals and Drinking Water
2.	IS 10909 : 2001 Reviewed In : 2015	Positive List of Constituents of Polypropylene and its Copolymers in Contact with Foodstuffs Pharaceuticals and Drinking Water
3.	IS 11310 : 1985 Reviewed In : 1990	Babul Gum
4.	IS 11856 : 1986	Adhesive Caulking Compound Bitumen Based
5.	IS 12229 : 1987 Reviewed In : 2015	Positive list of constituents of polyalkylene terephthalates PET PBT for their safe use in contact with foodstuffs pharmaceuticals and drinking water
6.	IS 13360 (Part 8/Sec 2) : 2004 ISO 976 Reviewed In : 2008	Plastics - Methods of Testing - Part 8 Permanence Chemical Properties - Section 2 Polymer Dispersions and Rubber Latices - Determination of Ph
7.	IS 13360 (Part 8/Sec 10) : 1999 Reviewed In : 2010	Plastics - Methods of Testing - Part 8 Permanence Chemical Properties - Section 10 Determination of Environmental Stress Cracking ESC - Ball or Pin Impression Method
8.	IS 13360 (Part 9/Sec 4) : 1997 ISO 183 Reviewed In : 2008	Plastics - Methods of Testing Part 9 Optical properties Sec 4 Qualitative evaluation of the bleeding of colorants
9.	IS 14635 : 1999 Reviewed In : 2020	Polytetrafluoroethylene Ptfe materials for moulding and extrusion - Specification
10.	IS 2038 : 1962	Fabric base thermosetting synthetic resin bonded laminated sheets
11.	IS 2213 : 1962	Methods of sampling of thermosetting moulding materials
12.	IS 2880 : 1986	Pressure sensitive adhesive cellulose tapes
13.	IS 3371 : 1980	Di-n-butyl Phthalate
14.	IS 3395 : 1997 ISO 1872-1 Reviewed In : 2020	Low density polyethylene Ldpe and linear low density polyethylene Lldpe materials for moulding and extrusion - Specification Second Revision
15.	IS 3465 : 1966	Jointing Compound For Use In Lpg Appliances And Installations
16.	IS 3672 : 1980	Di-Octyl phthalate plasticizer
17.	IS 3676 : 1986	Pressure sensitive adhesive PVC tapes
18.	IS 425 : 1953 Reviewed In : 2008	Shellac adhesive for steam flange joints
19.	IS 5025 : 1985 Reviewed In : 1990	Gum Karaya
20.	IS 6627 : 1980	Dimethyl phthalate plasticizer
21.	IS 7277 : 1974	Code of practice for safe use of polyethylene in contact with foodstuffs pharmaceutical and drinking water
22.	IS 7288 : 1974	Code of practice for safe use of polyvinyl chloride PVC and its copolymers in contact with foodstuffs pharmaceuticals and drinking water
23.	IS 7961 : 1976	Code of practice for safe use of styrene polymers in contact with foodstuffs pharmaceuticals and drinking water
24.	IS 8230 : 1976	Steel Filled Epoxy Resin Based Adhesives
25.	IS 8543 (Part 3/Sec 2) : 1978	Methods of Testing Plastics - Part III Preparation of Test Specimens - Section 2 Injection Moulded Test Specimens
26.	IS 8543 (Part 4/Sec 1) : 1984	Methods of testing plastics Part 4 Short term mechanical properties Section 1 Determination of tensile properties
27.	IS 9572 : 1980	Benzyl Butyl Phthalate Plasticizer
28.	IS 9849 : 1981	Guide for selection of toys for different age groups of children

Annexure-II :List of Indian Product Standards

SI. No.	IS No. & Year	Title
1.	IS 10142 : 1999 Reviewed In : 2018	Polystyrene crystal and high impact for its safe use in contact with foodstuffs pharmaceuticals and drinking water - Specification First Revision
2.	IS 10146 : 1982 Reviewed In : 2018	Specification for polyethylene for its safe use in contact with foodstuffs pharmaceuticals and drinking water
3.	IS 10151 : 2019	Polyvinyl chloride pvc and its copolymers for its safe use in contact with foodstuffs pharmaceuticals and drinking water - Specification First Revision
4.	IS 10734 : 1983 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for case vanity moulded body
5.	IS 10889 : 2004 Reviewed In : 2016	High density polyethylene films First Revision
6.	IS 10910 : 1984 Reviewed In : 2018	Specification for polypropylene and its copolymers for its safe use in contact with foodstuffs pharmaceuticals and drinking water
7.	IS 10951 : 2020	Specification for polypropylene pp materials for moulding and extrusion Second Revision
8.	IS 11434 : 2023	Ionomer resins for its safe use in contact with foodstuffs pharmaceuticals and drinking water - Specification First Revision
9.	IS 11704 : 2023	Ethylene acrylic acid eaa copolymers for their safe use in contact with food-stuffs pharmaceuticals and drinking water - Specification First Revision
10.	IS 11988 : 1986 Reviewed In : 2017	Specification for hot seal patches
11.	IS 12087 : 1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for suitcase for air and submarine crew
12.	IS 12210 : 2023	Caprolactam - Specification First Revision
13.	IS 12247 : 1988 Reviewed In : 2020	Specification for nylon-6 polymer for its safe use in contact with foodstuffs pharmaceuticals and drinking water
14.	IS 12252 : 2017 Reviewed In : 2022	Polyalkylene terephthalates pet and pbt their copolymers and list of constituents in raw materials and end products for their safe use in contact with foodstuffs and pharmaceuticals First Revision
15.	IS 12830 : 1989 Reviewed In : 2020	Rubber based adhesives for fixing pvc tiles to cement - Specification
16.	IS 12994 : 1990 Reviewed In : 2020	Epoxy adhesives room temperature curing general purpose - Specification
17.	IS 1300 : 1994 Reviewed In : 2020	Phenolic moulding materials - Specification Third Revision
18.	IS 13193 : 1992 Reviewed In : 2018	Polyalkylene terephthalates pet and pbt for moulding and extrusion - Specification
19.	IS 13217 : 1991 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Thermoplastics fumigation covers
20.	IS 13254 : 1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Animal glue for match industry - Specification
21.	IS 13255 : 1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Adhesive - Liquid - For use on high speed flap gumming and embossed envelope machines - Specification
22.	IS 13262 : 1992 Reviewed In : 2024	Pressure sensitive adhesive tapes with plastic base - Specification
23.	IS 13410 : 1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Glass reinforced polyester sheet moulding compounds smc - Specification
24.	IS 13411 : 1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Glass reinforced polyester dough moulding compounds - Specification
25.	IS 13463 : 2022	Polyamide 6 materials for moulding and extrusion - Specification First Revision
26.	IS 13464 : 1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Polyamide nylon 66 materials for moulding and extrusion - Specification
27.	IS 13576 : 1992 Reviewed In : 2024	Ethylene methacrylic acid emaa copolymers and terpolymers for their safe use in contact with foodstuffs pharmaceuticals and drinking water - Specification
28.	IS 13601 : 1993 Reviewed In : 2024	Ethylene vinyl acetate eva copolymers for its safe use in contact with foodstuffs pharmaceuticals and drinking water - Specification
29.	IS 13653 : 1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Anaerobic jointing compounds for use in liquefied petroleum gas appliances and installations - Specifications
30.	IS 13960 : 1994 Reviewed In : 2020	Thermoplastic strappings - Specification
31.	IS 14182 : 1994 Reviewed In : 2020	Solvent cement for use with unplasticized polyvinyl chloride plastic pipe and fittings - Specifications
32.	IS 14421 : 1997 Reviewed In : 2024	Plasticizer esters - Specification
33.	IS 14426 : 1997 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Chlorinated paraffins cp - Specification
34.	IS 14434 : 2023	Polycarbonate moulding and extrusion materials - Specification First Revision
35.	IS 14443 : 1997 Reviewed In : 2018	Polycarbonate sheets - Specification
36.	IS 14500 : 1998 Reviewed In : 2020	Linear low-density polyethylene lldpe films - Specification
37.	IS 14535 : 1998 Reviewed In : 2020	Recycled plastics for the manufacturing of products - Designation
38.	IS 1461 : 1984 Reviewed In : 2018	Specification for plastic buttons thermosetting Second Revision
39.	IS 14611 : 2016	Multilayered cross laminated sheets tarpaulins covers agricultural films - Specification First Revision
40.	IS 14635 (Part 1) : 2020	Fluoropolymer dispersions and moulding and extrusion materials Part 1 designation system First Revision
41.	IS 14643 : 1999 Reviewed In : 2020	Unsintered polytetrafluoroethylene ptfe tape for thread sealing applications - Specification
42.	IS 14752 : 2000 Reviewed In : 2020	Melamine formaldehyde resins to improve wet strength of paper - Specification
43.	IS 14753 : 1999 Reviewed In : 2020	Polymethyl methacrylate pmma acrylic sheets
44.	IS 14971 : 2001 Reviewed In : 2020	Polycarbonate resins for its safe use in contact with foodstuffs pharmaceuticals and drinking water - Specification
45.	IS 14995 : 2001 Reviewed In : 2016	Stretch cling films - Specification
46.	IS 14997 : 2001 Reviewed In : 2020	Modified poly phenylene oxide ppo resins for its safe use in contact with foodstuffs pharmaceuticals and drinking water - Specification
47.	IS 14999 : 2001 Reviewed In : 2020	Melamine-formaldehyde resins for its safe use in contact with foodstuffs pharmaceuticals and drinking water - Specification
48.	IS 15225 : 2002 Reviewed In : 2024	Chlorinated polyvinyl chloride compounds used for pipes and fittings - Specifications
49.	IS 15226 : 2002 Reviewed In : 2024	Rigid polyvinyl chloride pvc compounds - Specification
50.	IS 15559 : 2004 Reviewed In : 2020	Polyester strapping - Specification
51.	IS 15621 : 2005 Reviewed In : 2020	Tetrabromobisphenol-a - Specification
52.	IS 15623 : 2005 Reviewed In : 2020	Melamine 2 4 6 triamino 1 3 5 triazine - Specification
53.	IS 16154 : 2014 Reviewed In : 2024	Water soluble film - Specification
54.	IS 16459 : 2016 ISO 17557 : 2003 Reviewed In : 2021	Plastics - Film and sheeting - Cast polypropylene pp films
55.	IS 16460 : 2023 ISO 17555 : 2021	Plastics - Film and sheeting - Biaxially oriented polypropylene pp films First Revision
56.	IS 16591 (Part 1) : 2016 ISO 18263-1 : 2015 Reviewed In : 2021	Plastics - Mixtures of polypropylene pp and polyethylene pe recyclate derived from pp and pe used for flexible and rigid consumer packaging Part 1 designation system and basis for specification
57.	IS 16630 (Part 1) : 2018	Plastics - Post-consumer poly ethylene terephthalate pet bottle recyclates Part 1 designation system and basis for specifications
58.	IS 16864 : 2018 Reviewed In : 2024	Polycarbonate protective shield - Specification
59.	IS 17077 (Part 1) : 2022	Plastics - Acrylonitrile-butadienestyrene abs moulding and extrusion materials Part 1 designation system and specifications First Revision
60.	IS/ISO 17088 : 2021 ISO 17088 : 2021	Compostable plastics - Specification Second Revision
61.	IS 17216 : 2019 Reviewed In : 2024	Polyethylene mulch films for agriculture and horticulture - Specification
62.	IS 17230 : 2019 Reviewed In : 2024	Plastic carry case for storage transportation and carriage of voter verifiable paper audit trail vvpat printer - Specification
63.	IS 17397 (Part 1) : 2022	Plastics - Thermoplastic polyurethanes for moulding and extrusion Part 1 designation system and specifications First Revision
64.	IS 17658 : 2021	Polyvinyl chloride pvc homopolymers - Specification
65.	IS 17659 : 2021	Polyester polyol - Specification
66.	IS 17892 (Part 1) : 2022	Heat-activated adhesive coated polymeric tape - Specification Part 1 for seam sealing on ppe suits
67.	IS 17917 : 2022	Pressure sensitive adhesive films for general industrial applications - Specification
68.	IS 17927 (Part 1) : 2022	Plastics - Ethylene-vinyl acetate eva moulding and extrusion materials Part 1 designation system and specification
69.	IS 17928 (Part 1) : 2022	Plastics - Poly methyl methacrylate pmma moulding and extrusion materials Part 1 designation system and specifications
70.	IS 17988 : 2022	Chlorinated polyvinyl chloride cpvc resin - Specification
71.	IS 17990 : 2022	Hexamethyldisilazane - Specification
72.	IS 17992 : 2022	Superabsorbent polymer - Sodium polyacrylate resin for hygiene products - Specification
73.	IS 18103 : 2022	Plastics - Polyacrylamide materials - Designation system and specification
74.	IS 1843 : 2023	Nylon monofilaments - Specification First Revision
75.	IS 2036 : 1995 Reviewed In : 2020	Phenolic laminated sheets - Specification Second Revision
76.	IS 2046 : 1995 Reviewed In : 2020	Decorative thermosetting synthetic resin bonded laminated sheets - Specification Second Revision
77.	IS 2076 : 1981 Reviewed In : 2024	Specification for unsupported flexible polyvinyl chloride sheeting First Revision
78.	IS 2249 : 1984 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for adhesives liquid for leather-beltings First Revision
79.	IS 2257 : 1989 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Paper adhesives liquid gum and office paste type - Specification Third Revision
80.	IS 2267 (Part 1) : 2024 ISO 24022-1 : 2020	Polystyrene ps moulding and extrusion materials Part 1 designation system and basis for specification Third Revision
81.	IS 2508 : 2016	Polyethylene films and sheets - Specification Third Revision
82.	IS 2543 : 1995 Reviewed In : 2020	Cellulose secondary acetate materials for moulding and extrusion - Specification First Revision
83.	IS 2560 : 1979 Reviewed In : 2018 Reaffirmed but not taken up for revision	Specification for rubber-based adhesives for tubes non-curing First Revision
84.	IS 2561 : 1963 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for rubber-based adhesives for the automobile industry
85.	IS 2562 : 1979 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for rubber-based adhesives for tyres and tubes curing First Revision
86.	IS 2886 : 1991 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Labelling paste for paper labels - Specification First Revision
87.	IS 3389 : 1994 ISO 2112 Reviewed In : 2020	Urea-formaldehyde moulding materials - Specification First Revision
88.	IS 3447 : 1993 Reviewed In : 2020	Shellac jointing compound - Specification First Revision
89.	IS 3669 : 1994 ISO 2112 Reviewed In : 2020	Melamine-formaldehyde moulding materials - Specification First Revision
90.	IS 3687 : 1987 Reviewed In : 2018	Specification for pressure sensitive adhesive cloth tapes Second Revision
91.	IS 3693 : 1966 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for plastic spectacle frames
92.	IS 3730 : 1988 Reviewed In : 2020	Specification for high density polyethylene bucket First Revision
93.	IS 3988 : 2023	Guar gum - Specification Second Revision
94.	IS 4185 : 1989 Reviewed In : 2020 Reaffirmed but not taken up for revision	Adhesive paper tapes - Specification First Revision
95.	IS 4663 : 1968 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for permanent rubber-based adhesives for footwear industry
96.	IS 4761 : 1968 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for unsupported pvc rainwear
97.	IS 5210 : 1995 Reviewed In : 2020	High impact polystyrene sheet - Specification First Revision
98.	IS 5322 : 1988 Reviewed In : 2020	Specification for high density polyethylene wash-bowls First Revision
99.	IS 5378 : 1994 Reviewed In : 2020	Polyethylene cane - Specification First Revision
100.	IS 6307 : 2023	Rigid pvc sheets - Specification Second Revision
101.	IS 6367 : 1971 Reviewed In : 2018	Specification for dextrin for adhesive industry
102.	IS 6746 : 1994 Reviewed In : 2020	Unsaturated polyester resin systems - Specification First Revision
103.	IS 7166 : 1985 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for cellulose secondary acetate flakes First Revision
104.	IS 7328 : 2020	Specification for polyethylene material for moulding and extrusion Third Revision
105.	IS 7393 : 1974 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for adhesive bitumen emulsion
106.	IS 7395 : 1989 Reviewed In : 2016	Gum ghatti - Specification First Revision
107.	IS 7569 : 1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for cast acrylic sheets for use in luminaires Second Revision
108.	IS 9220 : 1979 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for tableware made of melamine plastics
109.	IS 9766 : 1992 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Flexible pvc compounds - Specification First Revision
110.	IS 9827 : 2023	Shoe adhesive - Natural rubber latex base - Specification First Revision
111.	IS 9848 : 1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for briefcases plastic body First Revision