Programme of work

  1. Home
  2. Programme of work

BUREAU OF INDIAN STANDARDS


Transport Engineering Department

Programme of Work




TED34 : Springs and Suspension Systems Sectional Committee


  • Scope : a) Standardization of Shock absorbers & Springs including Automotive springs containing engine rocker arm springs and suspension systems. b) Co-ordination of work with ISO/TC 227. c) Co-ordination of work with ISO/TC 22.
  • Liaison :
    ISO TC ISO TC 227 - Springs - Participating (P)

Published Standards

SI. No.
IS No.
Title
Reaffirmation Details
No. of Amendments
Degree of Equivalence
1.
 IS 10063 : 1982
Reviewed In : 2019
Dimensions of end fittings of rear shock absorbers for scooters and motorcycle - S
March, 2019
-
Indigenous
2.
 IS 10876 : 1984
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Specification for buckles for laminated springs for railway rocling stock
March, 2024
-
Indigenous
3.
 IS 10878 (Part 1) : 1984
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Specification for flat form springs: Part 1 design and calculation for springs made from rectangular cold - Rolled strips
March, 2024
-
Indigenous
4.
 IS 10878 (Part 2) : 1984
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Flat - Form springs: Part 2 speciFication for springs made from rectangular cold - Rolled strips
March, 2024
-
Indigenous
5.
 IS 1135 : 2018

Reviewed In : 2024
Springs - Leaf springs assembly for automobiles - Specification (Sixth Revision)
September, 2024
-
Indigenous
6.
 IS 12511 (Part 1) : 2004
Reviewed In : 2019
Springs - Disc spring: Part 1 design calculation (First Revision)
March, 2019
-
Indigenous
7.
 IS 12511 (Part 2) : 2004
Reviewed In : 2019
Springs - Disc spring: Part 2 specification (First Revision)
March, 2019
-
Indigenous
8.
 IS 12648 : 1989
Reviewed In : 2019
Automotive vehicles - End mountings of shock absorbers - Dimensions and tests
March, 2019
-
Indigenous
9.
 IS 15453 : 2004
Reviewed In : 2019
Spring - Tors1on bar springs - Specification
March, 2019
-
Indigenous
10.
 IS/ISO 16249 : 2013
ISO 16249 : 2013
Reviewed In : 2022
Springs - Symbols
December, 2022
-
Identical under single numbering
11.
 IS 17458 (Part 1) : 2024
ISO 22705-1:2021
Springs � Measurement and Test Parameters Part 1 Cold Formed Cylindrical Helical Compression Springs
-
Identical under dual numbering
12.
 IS 18622 (Part 2) : 2024
ISO 22705-2: 2023
Springs � Measurement and Test Parameters Part 2 Cold Formed Cylindrical Helical Extension Springs
-
Identical under dual numbering
13.
 IS/ISO 2162-2 : 1993
ISO 2162-2 : 1993
Reviewed In : 2021
Technical product documentation - Springs: Part 2 presentation of data for cylindrical helical compression springs
March, 2021
-
Identical under single numbering
14.
 IS/ISO 26909 : 2009
ISO 26909
Reviewed In : 2022
Springs - Vocabulary
December, 2022
-
Identical under single numbering
15.
 IS 5423 : 1989
Reviewed In : 2019
Automotive vehicles - Shock absorbers - Specification (Second Revision)
March, 2019
2
Indigenous
16.
 IS 7001 : 2017
ISO 26910-1 : 2009
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Springs - Shot peening - General procedures (Second Revision)
March, 2024
-
Modified/Technically Equivalent
17.
 IS 7864 (Part 1) : 1975
Reviewed In : 2023
Specification for upholstery springs 1: Part 1 conical type
December, 2023
-
Indigenous
18.
 IS 7864 (Part 2) : 1979
Reviewed In : 2024
Decision taken to Reaffirm and Archive
SpecificAtion for . upholstrey springs: Part 2 ziGzag type
March, 2024
-
Indigenous
19.
 IS 7906 (Part 1) : 1997
Reviewed In : 2023
Helical compression springs: Part 1. design and calculation for springs made from circular section wire and bar (First Revision)
December, 2023
-
Indigenous
20.
 IS 7906 (Part 2) : 1975
Reviewed In : 2019
Helical compression springs: Part 2 specification for cold coiled springs made from circular section wire an d bar
March, 2019
1
Indigenous
21.
 IS 7906 (Part 3) : 1975
Reviewed In : 2020
Helical compression springs: Part 3 data sheet for specifications for springs made from circular section wire and bar
January, 2020
-
Indigenous
22.
 IS 7906 (Part 4) : 1987
Reviewed In : 2019
Helical compression springs: Part 4 selection of standard cold coiled springs made from circular section wire and bar
March, 2019
-
Indigenous
23.
 IS 7906 (Part 5) : 2004
Reviewed In : 2019
Helical compression springs: Part 5 hot coiled springs made from circular section bars - Specification (Second Revision)
March, 2019
1
Indigenous
24.
 IS 7906 (Part 6) : 1978
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Helical compression springs: Part 6 design and calculations for springs made from rectangular section bar - Steel
March, 2024
-
Indigenous
25.
 IS 7906 (Part 7) : 1989
Reviewed In : 2019
Helical compression springs: Part 7 quality requirements for cylindrical coil compression springs used mainly as vehicle suspension springs
March, 2019
-
Indigenous
26.
 IS 7906 (Part 8) : 1989
Reviewed In : 2019
Helical compression springs: Part 8 method of inspection of hotcoiled compression springs made from circular section bars
March, 2019
-
Indigenous
27.
 IS 7907 (Part 1) : 2004
Reviewed In : 2024
Helical extension springs october 2004: Part 1 design and calculation for springs made from circular section wire and bar (First Revision)
August, 2024
-
Indigenous
28.
 IS 7907 (Part 2) : 1976
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Helical extension springs: Part 2 specification for cold coiled springs made from circular section wire and bar
March, 2024
-
Indigenous
29.
 IS 7907 (Part 3) : 1975
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Helical extension springs: Part 3 data sheet for specifications for springs made from circular section wire and bar
March, 2024
-
Indigenous
30.
 IS 7907 (Part 4) : 1987
Reviewed In : 2023
Specification for helical extension springs: Part 4 selection of standard cold coiled springs made - From circular section wire and bar
December, 2023
-
Indigenous
31.
 IS 8924 : 1978
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Specification for bushes for leaf spring assemblies for automotive suspension
March, 2024
-
Indigenous
32.
 IS 9484 : 1980
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Specification for centre bolts for leaf springs
June, 2024
1
Indigenous
33.
 IS 9574 : 2004
Reviewed In : 2019
Leaf springs assembly clips - Specification (Second Revision)
March, 2019
-
Indigenous
34.
 IS 9801 : 1981
Reviewed In : 2023
Specification for laminated springs for railway rolling stock
December, 2023
-
Indigenous

Standards Under Develpoment

Projects Approved

SI. No.
Doc No
TITLE
No Records Found

Preliminary Draft Standards

SI. No.
Doc No
TITLE
No Records Found

Drafts Standards in WC Stage

SI. No.
Doc No
TITLE
No Records Found

Draft Standards Completed WC Stage

SI. No.
Doc No
TITLE
1
TED 34 (26557)
Revision of: IS 7906:2004
HELICAL COMPRESSION SPRINGS PART 5 HOT COILED SPRINGS MADE FROM CIRCULAR SECTION BARS SPECIFICATION Third Revision

Finalized Draft Indian Standard

SI. No.
Doc No
TITLE
No Records Found

Finalized Draft Indian Standards under Print

SI. No.
Doc No
TITLE
1
TED 34 (25924)
SPRINGS MEASUREMENT AND TEST PARAMETERS PART 3 COLD FORMED CYLINDRICAL HELICAL TORSION SPRINGS
2
TED 34 (26558)

Revision of: IS 7906:1975
HELICAL COMPRESSION SPRINGS PART 3 DATA SHEET FOR SPECIFICATIONS FOR SPRINGS MADE FROM CIRCULAR SECTION WIRE AND BAR First Revision


Aspect Wise Report

 
 Product:   14
 Code of Practices :    5
 Methods of Test :   5
 Terminology :   2
 Dimensions :   7
 System Standard :   0
 Safety Standard :   0
 Others :    0
 Service Specification :    0
 Process Specification :    0
 Unclassified :    0
 


Annexure-I :List of Indian Standards Withdrawn/Superseded

SI. No.
IS No.
Title
1.
 IS 1135 : 1995
Reviewed In : 2015
Springs - Leaf Springs Assembly for Automobiles


Annexure-II :List of Indian Product Standards

SI. No.
IS No. & Year
Title
1.
 IS 10876 : 1984
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Specification for buckles for laminated springs for railway rocling stock
2.
 IS 10878 (Part 2) : 1984
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Flat - Form springs Part 2 speciFication for springs made from rectangular cold - Rolled strips
3.
 IS 12511 (Part 2) : 2004
Reviewed In : 2019
Springs - Disc spring Part 2 specification First Revision
4.
 IS 15453 : 2004
Reviewed In : 2019
Spring - Tors1on bar springs - Specification
5.
 IS 5423 : 1989
Reviewed In : 2019
Automotive vehicles - Shock absorbers - Specification Second Revision
6.
 IS 7864 (Part 1) : 1975
Reviewed In : 2023
Specification for upholstery springs 1 Part 1 conical type
7.
 IS 7864 (Part 2) : 1979
Reviewed In : 2024
Decision taken to Reaffirm and Archive
SpecificAtion for upholstrey springs Part 2 ziGzag type
8.
 IS 7906 (Part 2) : 1975
Reviewed In : 2019
Helical compression springs Part 2 specification for cold coiled springs made from circular section wire an d bar
9.
 IS 7906 (Part 5) : 2004
Reviewed In : 2019
Helical compression springs Part 5 hot coiled springs made from circular section bars - Specification Second Revision
10.
 IS 7907 (Part 2) : 1976
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Helical extension springs Part 2 specification for cold coiled springs made from circular section wire and bar
11.
 IS 8924 : 1978
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Specification for bushes for leaf spring assemblies for automotive suspension
12.
 IS 9484 : 1980
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Specification for centre bolts for leaf springs
13.
 IS 9574 : 2004
Reviewed In : 2019
Leaf springs assembly clips - Specification Second Revision
14.
 IS 9801 : 1981
Reviewed In : 2023
Specification for laminated springs for railway rolling stock