Programme of work

  1. Home
  2. Programme of work

BUREAU OF INDIAN STANDARDS


Metallurgical Engineering Department

Programme of Work




MTD25 : Powder Metallurgical materials and Products Sectional Committee


  • Scope : Standardization in the field of powder metallurgical materials
  • Liaison :
    ISO/TC 119 - Powder metallurgy - Participating (P)
    ISO/TC 119/SC 2 - Sampling and testing methods for powders (including powders for hardmetals) - Observer (O)
    ISO/TC 119/SC 3 - Sampling and testing methods for sintered metal materials (excluding hardmetals) - Observer (O)
    ISO/TC 119/SC 4 - Sampling and testing methods for hardmetals - Observer (O)
    ISO/TC 119/SC 5 - Specifications for powder metallurgical materials (excluding hardmetals) - Observer (O)

Published Standards

SI. No.
IS No.
Title
Reaffirmation Details
No. of Amendments
Degree of Equivalence
1.
 IS 10035 : 2023
BRONZE POWDER FOR METALLIC FILTERS - SPECIFICATION
-
Indigenous
2.
 IS 10385 : 2019
ISO 2739 : 2012
Reviewed In : 2024
Sintered metal bushings - Determination of radial crushing strength (First Revision)
January, 2024
-
Identical under dual numbering
3.
 IS 11110 : 2023
Copper - Lead powder - Specification
-
Indigenous
4.
 IS 11111 : 2023
Leaded bronze powders - Specification
-
Indigenous
5.
 IS 11506 : 2019
ISO 13944 : 2012
Reviewed In : 2024
Lubricated metal-powder mixes - Determination of lubricant content - Modified Soxhlet extraction method
January, 2024
-
Identical under dual numbering
6.
 IS 11518 : 2023
Method for determination of The Magnetization coercivity in hardmetals
-
Indigenous
7.
 IS 11520 : 2023
Metallographic Sample Preparation of Hardmetals � Method ( First Revision )
-
Indigenous
8.
 IS 11627 : 2023
Determination of Apparent Density of Metallic Powders by Scott Volumeter - Method ( First Revision )
-
Not Equivalent
9.
 IS 11959 : 2023
Metallographic Determination of Microstructure in Hard Metals � Method ( First Revision )
-
Not Equivalent
10.
 IS 11960 : 2023
Metallographic Determination of Apparent Porosity and Uncombined Carbon in Hard Metals - Method ( First Revision )
-
Not Equivalent
11.
 IS 12279 : 2005
ISO 3325:1996
Reviewed In : 2022
Sintered metal materials, excluding hardmetals - Determination of transverse rupture strength (First Revision)
July, 2022
-
Identical under dual numbering
12.
 IS 12286 : 1988
Reviewed In : 2024
Method for determination of abrasive wear resistance of hardmetals
February, 2024
-
Not Equivalent
13.
 IS 12473 (Part 1) : 1988
Reviewed In : 2023
Chemical analysis of hardmetals by flame atomic absorption spectrometry: Part 1 general requirements
November, 2023
-
Not Equivalent
14.
 IS 12473 (Part 2) : 1988
Reviewed In : 2023
CHEMICAL ANALYSIS OF HARDMETALS BY FLAME ATOMIC ABSORPTION SPECTROMETRY PART 2 DETERMINATION OF CALCIUM, POTASSIUM, MAGNESIUM AND SODIUM IN CONTENTS FROM 0.001 TO 0.02 PERCENT
October, 2023
-
Not Equivalent
15.
 IS 12473 (Part 3) : 1988
Reviewed In : 2024
Chemical analysis of hardmetals by flame atomic absorption spectrometry: Part 3 determination of cobalt, iron, manganese and nickel in contents from 0.01 to 0.5 percent (M/m)
January, 2024
-
Not Equivalent
16.
 IS 12473 (Part 4) : 1988
Reviewed In : 2024
Chemical analysis of hardmetals by flame atomic absorption spectrometry: Part 4 determination of molybdenum, titanium and vanadium in contents from 0.01 to 0.5 percent (M/m)
February, 2024
-
Not Equivalent
17.
 IS 12473 (Part 5) : 1988
Reviewed In : 2023
Chemical analysis of hardmetals by flame atomic absorption spectrometry: Part 5 determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0.5 to 2 percent (M/m)
September, 2023
-
Not Equivalent
18.
 IS 12473 (Part 6) : 1988
Reviewed In : 2023
Chemical analysis of hardmetals by flame atomic absorption spectrometry: Part 6 determination of chromium in contents from 0.01 to 2 percent (M/m)
December, 2023
-
Not Equivalent
19.
 IS 12483 : 1988
Reviewed In : 2024
Determination of titanium in hardmetals by spectrophotometric method
February, 2024
-
Not Equivalent
20.
 IS 12513 : 1988
Reviewed In : 2024
Determination of cobalt in hardmetals by potentiometric method
February, 2024
-
Not Equivalent
21.
 IS 12539 : 2022
ISO 3907:2009
Hardmetals Determination of total carbon Gravimetric method (First Revision)
-
Identical under dual numbering
22.
 IS 12548 : 2022
ISO 3908:2009
Hardmetals Determination of insoluble free carbon Gravimetric method
-
Identical under dual numbering
23.
 IS 12570 : 2022
ISO 4492:2017
Metallic powders excluding powders for hardmetals Determination of dimensional changes associated with compacting and sintering
-
Identical under dual numbering
24.
 IS 12571 : 1988
Reviewed In : 2024
DETERMINATION OF GREEN STRENGTH BY TRANSVERSE RUPTURE OF RECTANGULAR COMPACTS OF METALLIC POWDER - METHODS
February, 2024
-
Not Equivalent
25.
 IS 12783 : 1989
Reviewed In : 2024
Hardmetals - Vickers hardness test
February, 2024
-
Indigenous
26.
 IS 13780 : 2020
ISO 4506 : 2018
Hardmetals — Compression Test ( First Revision )
-
-
Identical under dual numbering
27.
 IS 13781 : 1993
ISO 4003:1977
Reviewed In : 2024
Permeable sintered metal materials - Determination of bubble test pore size
February, 2024
-
Identical under dual numbering
28.
 IS 13782 : 2023
ISO 4022 : 2018
PERMEABLE SINTERED METAL MATERIALS - DETERMINATION OF FLUID PERMEABILITY (First Revision)
-
Identical under dual numbering
29.
 IS 13803 : 1993
ISO 3312:1987
Reviewed In : 2024
Sintered metal materials and hardmetals - Determination of young modulus
February, 2024
-
Identical under dual numbering
30.
 IS 15554 : 2018
ISO 2740:2009
Reviewed In : 2022
Sintered metal materials, excluding hardmetals - Tensile test pieces (First Revision)
October, 2022
-
Identical under dual numbering
31.
 IS 15567 : 2020
ISO 3928 : 2016
Sintered Metal Materials, Excluding Hardmetals — Fatigue Test Pieces ( First Revision )
-
-
Identical under dual numbering
32.
 IS 15574 : 2022
ISO 5754:2017
Sintered metal materials excluding hardmetals Unnotched impact test piece
-
Identical under dual numbering
33.
 IS 15585 : 2018
ISO 5755:2012
Reviewed In : 2022
Sintered metal materials - Specifications (First Revision)
October, 2022
-
Identical under dual numbering
34.
 IS 15703 : 2018
4498:2010
Reviewed In : 2022
Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (First Revision)
October, 2022
-
Identical under dual numbering
35.
 IS 17074 : 2023
ISO 13517: 2020
Metallic powders Determination of flow rate by means of a calibrated funnel Gustavsson flowmeter
-
Identical under dual numbering
36.
 IS 17074 : 2019
ISO 13517 : 2013
Metallic powders - Determination of flow rate by means of a calibrated funnel (Gustavsson Flowmeter)
-
Identical under dual numbering
37.
 IS/ISO 4507 : 2000
ISO 4507:2000
Reviewed In : 2021
Sintered ferrous materials, carburized or carbonitrided - Determination and verification of case - Hardening depth by a micro - Hardness test
March, 2021
-
Identical under single numbering
38.
 IS 4840 : 2022
ISO 4490:2018
Metallic powders Determination of flow rate by means of a calibrated funnel Hall flowmeter
-
Identical under dual numbering
39.
 IS 4841 : 2022
ISO 3369:2006
Impermeable sintered metal materials and hardmetals Determination of density
-
Identical under dual numbering
40.
 IS 4842 : 2018
ISO 3327 : 2009
Reviewed In : 2022
Hardmetals - Determination of transverse ruputre strength (Second Revision)
October, 2022
-
Identical under dual numbering
41.
 IS 4848 : 2022
ISO 3923-1: 2018
Reviewed In : 2022
Metallic powders Determination of apparent density: Funnel method
-
-
Identical under dual numbering
42.
 IS 4857 : 2020
ISO 3927 : 2017
Metallic Powders, Excluding Powders for Hardmetals — Determination of Compressibility in Uniaxial Compression ( Fifth Revision )
-
-
Identical under dual numbering
43.
 IS 5432 : 2022
ISO 3252 : 2019
POWDER METALLURGY-VOCABULARY
-
Identical under dual numbering
44.
 IS 5461 : 2024
ISO 4497: 2020
Metallic powders � Determination of particle size by dry sieving ( Second Revision )
-
Identical under dual numbering
45.
 IS 5642 : 2014
ISO 2738
Reviewed In : 2020
Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (Third Revision)
July, 2020
-
Identical under dual numbering
46.
 IS 5644 (Part 1) : 1993
ISO 4491-1:1997
Reviewed In : 2024
Metallic powders - Determination of oxygen content by reduction methods: Part 1 general guidelines (Third Revision)
February, 2024
-
Identical under dual numbering
47.
 IS 5644 (Part 2) : 2005
ISO 4491-2:1997
Reviewed In : 2022
Metallic powders - Determination of oxygen content by reduction methods: Part 2 loss of mass on hydrogen reduction (Hydrogen Loss) (Fourth Revision)
July, 2022
-
Identical under dual numbering
48.
 IS 5644 (Part 3) : 2005
ISO 4491-3:1997
Reviewed In : 2022
Metallic powders - Determination of oxygen content by reduction methods: Part 3 hydrogen - Reducible oxygen (Fourth Revision)
July, 2022
-
Identical under dual numbering
49.
 IS 5644 (Part 4) : 2023
ISO 4491-4 : 2019
Metallic powders Determination of oxygen content by reduction methods Part 4: Total oxygen by reduction-extraction Fifth Revision
-
Identical under dual numbering
50.
 IS 5652 (Part 1) : 1993
ISO 3738-1:1982
Reviewed In : 2024
Hardmetals - Rockwell hardness test (Scale A): Part 1 test method (Second Revision)
February, 2024
-
Identical under dual numbering
51.
 IS 6492 : 2020
ISO 3954 : 2007
Powders for Powder Metallurgical Purposes — Sampling ( First Revision )
-
-
Identical under dual numbering
52.
 IS 7438 : 2022
ISO 4496:2017
Metallic powders Determination of acid-insoluble content in iron copper tin and bronze powders
-
Identical under dual numbering
53.
 IS 7505 : 2024
Cobalt Powder for Hardmetals — Specification (Second Revision)
-
Indigenous
54.
 IS 7505 : 1985
Reviewed In : 2023
Specification for cobalt powder for hardmetals (First Revision)
January, 2023
-
Indigenous
55.
 IS 7506 : 1987
Reviewed In : 2024
Specification for nickel powder (First Revision)
February, 2024
-
Indigenous
56.
 IS 7512 : 2006
Reviewed In : 2022
Method for the determination of average particle size of metal powders by fisher sub-sieve sizer (First Revision)
July, 2022
-
Not Equivalent
57.
 IS 7970 : 2024
Tantalum powder for capacitors - Specification ( Second Revision )
-
Indigenous
58.
 IS 7970 : 1987
Reviewed In : 2024
Specification for tantalum powder for capacitors (First Revision)
February, 2024
1
Indigenous
59.
 IS 8367 : 2023
TIN POWDER � SPECIFICATION
-
Indigenous
60.
 IS 8368 : 2010
Reviewed In : 2024
Tungsten carbide powder for hardmetals - Specification (Second Revision)
February, 2024
-
Indigenous
61.
 IS 8369 : 2010
Reviewed In : 2024
Titanium carbide powder for hardmetals - Specification (Second Revision)
March, 2024
-
Indigenous
62.
 IS 8370 : 2018

Reviewed In : 2022
Iron powder for powder metallurgical applications (First Revision)
October, 2022
-
Indigenous
63.
 IS 8392 : 2023
TUNGSTEN POWDER FOR HARDMETALS � SPECIFICATION(Second revision)
-
Indigenous
64.
 IS 8485 : 2018

Reviewed In : 2022
Copper powder for powder metallurgical applications (First Revision)
October, 2022
-
Indigenous
65.
 IS 8871 : 2018
ISO 3953:2011
Reviewed In : 2022
Metallic powders - Determination of tap density (Third Revision)
July, 2022
-
Identical under dual numbering
66.
 IS 8876 : 2023
METHODS FOR DETERMINATION OF RESIDUE ON CHLORINATION OF TUNGSTEN METAL POWDER (First Revision)
-
Indigenous

Standards Under Develpoment

Projects Approved

SI. No.
Doc No
TITLE
No Records Found

Preliminary Draft Standards

SI. No.
Doc No
TITLE
1
MTD 25 (23788)
Revision of: IS 12473:1988
Chemical analysis of hardmetals by flame atomic absorption spectrometry Part 1 general requirements
2
MTD 25 (23789)
Revision of: IS 12473:1988
CHEMICAL ANALYSIS OF HARDMETALS BY FLAME ATOMIC ABSORPTION SPECTROMETRY PART 2 DETERMINATION OF CALCIUM POTASSIUM MAGNESIUM AND SODIUM IN CONTENTS FROM 0001 TO 002 PERCENT mm
3
MTD 25 (23790)
Revision of: IS 12473:1988
CHEMICAL ANALYSIS OF HARDMETALS BY FLAME ATOMIC ABSORPTION SPECTROMETRY PART 3 DETERMINATION OF COBALT IRON MANGANESE AND NICKEL IN CONTENTS FROM 001 TO 05 PERCENT min First Revision of IS 12473 PART - 3
4
MTD 25 (24244)
Revision of: IS 12473:1988
CHEMICAL ANALYSIS OF HARDMETALS BY FLAME ATOMIC ABSORPTION SPECTROMETRY PART 4 DETERMINATION OF MOLYBDENUM TITANIUM AND VANADIUM IN CONTENTS FROM 001 TO 05 PERCENT mm
5
MTD 25 (24245)
Revision of: IS 12473:1988
Chemical analysis of hardmetals by flame atomic absorption spectrometry Part 5 determination of cobalt iron manganese molybdenum nickel titanium and vanadium in contents from 05 to 2 percent Mm
6
MTD 25 (24247)
Revision of: IS 12473:1988
Chemical analysis of hardmetals by flame atomic absorption spectrometry Part 6 determination of chromium in contents from 001 to 2 percent Mm
7
MTD 25 (26915)
Revision of: IS 7506:1987
NICKEL POWDER FOR HEAVY ALLOYS AND HARD METALS - SPECIFICATION Second Revision

Drafts Standards in WC Stage

SI. No.
Doc No
TITLE
1
MTD 25 (24972)
Revision of: IS 12483:1988
DETERMINATION OF TITANIUM IN HARDMETALS BY SPECTROPHOTOMETRIC - METHOD First Revision
2
MTD 25 (24973)
Revision of: IS 12513:1988
DETERMINATION OF COBALT IN HARDMETALS BY POTENTIOMETRIC METHOD First Revision

Draft Standards Completed WC Stage

SI. No.
Doc No
TITLE
1
MTD 25 (24978)
Revision of: IS 12783:1989
HARDMETALS- VICKERS HARDNESS TEST First Revision

Finalized Draft Indian Standard

SI. No.
Doc No
TITLE
No Records Found

Finalized Draft Indian Standards under Print

SI. No.
Doc No
TITLE
1
MTD 25 (21872)

Revision of: IS 12286:1988
Determination of Abrasive Wear Resistance of Hard Metals Methods First Revision
2
MTD 25 (24982)

Revision of: IS 12571:1988
Methods for Determination of Green Strength by Transverse Rupture of Rectangular Compacts of Metallic Powder First Revision


Aspect Wise Report

 
 Product:   13
 Code of Practices :    1
 Methods of Test :   47
 Terminology :   1
 Dimensions :   0
 System Standard :   0
 Safety Standard :   0
 Others :    1
 Service Specification :    0
 Process Specification :    0
 Unclassified :    0
 


Annexure-I :List of Indian Standards Withdrawn/Superseded

SI. No.
IS No.
Title
1.
 IS 10441 : 1991
Metallic powders - determination of apparent density - oscillating funnel method
2.
 IS 12216 : 1987
Tantalum Carbide Powder
3.
 IS 12217 : 1987
Niobium Carbide Powder


Annexure-II :List of Indian Product Standards

SI. No.
IS No. & Year
Title
1.
 IS 10035 : 2023
BRONZE POWDER FOR METALLIC FILTERS - SPECIFICATION
2.
 IS 11110 : 2023
Copper - Lead powder - Specification
3.
 IS 11111 : 2023
Leaded bronze powders - Specification
4.
 IS 15585 : 2018
ISO 5755:2012
Reviewed In : 2022
Sintered metal materials - Specifications First Revision
5.
 IS 7505 : 2024
Cobalt Powder for Hardmetals Specification Second Revision
6.
 IS 7506 : 1987
Reviewed In : 2024
Specification for nickel powder First Revision
7.
 IS 7970 : 2024
Tantalum powder for capacitors - Specification Second Revision
8.
 IS 8367 : 2023
TIN POWDER SPECIFICATION
9.
 IS 8368 : 2010
Reviewed In : 2024
Tungsten carbide powder for hardmetals - Specification Second Revision
10.
 IS 8369 : 2010
Reviewed In : 2024
Titanium carbide powder for hardmetals - Specification Second Revision
11.
 IS 8370 : 2018

Reviewed In : 2022
Iron powder for powder metallurgical applications First Revision
12.
 IS 8392 : 2023
TUNGSTEN POWDER FOR HARDMETALS SPECIFICATION Second revision
13.
 IS 8485 : 2018

Reviewed In : 2022
Copper powder for powder metallurgical applications First Revision