Programme of work

  1. Home
  2. Programme of work

BUREAU OF INDIAN STANDARDS


Petroleum, Coal and Related Products Department

Programme of Work




PCD25 : Lubricants And their Related Products


  • Scope : To formulate Indian Standards for terminology; lubricants, bio-lubricants, lubricating oils & greases and their related products like coolants, hydraulic fluids, corrosion preventives, quenching and cutting oils, lubricants produced through synthesis routes and codes of practice for storage, handling, transport and application.
  • Liaison :
    ISO/TC 28/SC 2/WG 13 - Marine bunkering
    ISO/TC 28/SC 4 - Classifications and specifications - Participating (P)
    ISO/TC 28/SC 4/WG 16 - Classifications and specifications of industrial gear oils, turbine oils, compressor oils and lubricating greases
    ISO/TC 28/SC 4/WG 17 - Specifications of liquefied natural gas for marine applications
    ISO/TC 28/SC 4/WG 3 - Joint ISO/TC 28/SC 4 - ISO/TC 131 WG: Classification and specifications of hydraulic fluids
    ISO/TC 28/SC 4/WG 6 - Classification and specification of marine fuels
    ISO/TC 28/WG 17 - Viscosity and flow properties
    ISO/TC 28/WG 25 - Hydrocarbon analysis
    ISO/TC 28/WG 26 - Physio-chemical and inspection tests
    ISO/TC 28/WG 27 - Stability, cleanliness and compatibility
    ISO/TC 28/WG 28 - Aviation fuel test methods development - Convenorship
    ISO/TC 28/WG 9 - Joint ISO/TC 28 - ISO/TC 35 WG: Flash point methods

Published Standards

SI. No.
IS No.
Title
Reaffirmation Details
No. of Amendments
Degree of Equivalence
1.
 IS 1012 : 2002
Reviewed In : 2018
Reaffirmed but not taken up for revision
Turbine lubricating oils - Specification (Third Revision)
February, 2018
1
Indigenous
2.
 IS 10522 : 1983
ISO 3448
Reviewed In : 2019
Specification for antiwear hydraulic oil
November, 2019
-
Indigenous
3.
 IS 10531 : 1983
Reviewed In : 2019
Code of practice for selection and use of fire - Resistant hydraulic fluids
November, 2019
-
Indigenous
4.
 IS 10532 (Part 1) : 1983
Reviewed In : 2019
Specification for fire - Resistant hydraulic fluids: Part i dilute emulsions for powered supports
November, 2019
1
Indigenous
5.
 IS 10532 (Part 2) : 1983
Reviewed In : 2019
Specification for fire - Resistant hydraulic fluids - Part 2 : invert emulsions (Water - In - Oil) type
November, 2019
1
Indigenous
6.
 IS 10532 (Part 3) : 1983
Reviewed In : 2019
Specificaiton for fire - Resistant hydraulic fluids - Part 3 : water glycol type
November, 2019
2
Indigenous
7.
 IS 10532 (Part 4) : 2019

Reviewed In : 2024
Fire resistant hydraulic fluids - Specification: Part 4 phosphate esters type (First Revision)
April, 2024
-
Indigenous
8.
 IS 10532 (Part 5) : 2016

Reviewed In : 2021
Fire resistant hydraulic fluids - Specification: Part 5 organic ester type
April, 2021
-
Indigenous
9.
 IS 10647 : 1983
Reviewed In : 2019
Specification for wheel bearing grease
November, 2019
-
Indigenous
10.
 IS 1083 : 2022
Industrial White Oil - Specification (Second Revision)
-
Indigenous
11.
 IS 1115 : 1986
Reviewed In : 2024
Specification for general purpose cutting oil, soluble (Second Revision)
April, 2024
1
Indigenous
12.
 IS 11159 (Part 1) : 2020
General Classification of Lubricants, Industrial Oils and Related Products Part 1 Class L ( First Revision )
-
-
Indigenous
13.
 IS 11159 (Part 2) : 2021
Classification of lubricants industrial oils and related products Part 2 Family A Total loss systems
-
Indigenous
14.
 IS 11159 (Part 3) : 2021
General classification of lubricants industrial oils and related products Part 3 Family F Spindle bearings bearings and associated clutches
-
Indigenous
15.
 IS 11159 (Part 4) : 2011
ISO 6743-3 : 2003
Reviewed In : 2021
Lubricants, industrial oils and related products (Class L) - Classification: Part 4 family d (Compressors)
April, 2021
-
Identical under dual numbering
16.
 IS 11159 (Part 5) : 2019
ISO 6743_4 : 2009

Reaffirmed but not taken up for revision
Lubricants, industrial oils and related products (Class L) - Classification: Part 5 family h (Hydraulic Systems) (First Revision)
-
-
Identical under dual numbering
17.
 IS 11159 (Part 6) : 2011
ISO 6743_5 : 2006
Reviewed In : 2021
Lubricants, industrial oils and related products (Class L) - Classification: Part 6 family t (Turbines)
April, 2021
-
Identical under dual numbering
18.
 IS 11159 (Part 7) : 2019
ISO 6736-6 : 2018

Reaffirmed but not taken up for revision
Lubricants, industrial oils and related products (Class L) - Classification: Part 7 family c (Gear Systems) (First Revision)
-
-
Identical under dual numbering
19.
 IS 11159 (Part 13) : 2019
ISO 6743-12 : 1989

Reaffirmed but not taken up for revision
Lubricants, industrial oils and related products (Class L) - Classification: Part 13 family q (Heat Transfer Fluids)
-
Identical under dual numbering
20.
 IS 1118 : 2019
Gear lubricants, multipurpose (Extreme Pressure Gear Oil) - specification (Second Revision)
-
-
Indigenous
21.
 IS 11186 : 1985
Reviewed In : 2024
Specification for synthetic grinding fluid
April, 2024
1
Indigenous
22.
 IS 1153 : 2021
Temporary Corrosion Preventives Hard Film Solvent Deposited
-
Indigenous
23.
 IS 1154 : 2022
Temporary Corrosion Preventive Fluid, Soft Film, Solvent Deposited, Water Displacing - Specification (second revision)
-
Indigenous
24.
 IS 11637 : 2022
Calcium Based EP Grease - Specification (first revision)
-
Indigenous
25.
 IS 11656 : 1986
Reviewed In : 2024
Specification for antiwear hydraulic oil, extra heavy duty type
April, 2024
1
Indigenous
26.
 IS 11695 : 2020
Inhibited Type Machinery Oils ? Specification ( First Revision )
-
-
Indigenous
27.
 IS 11696 : 2020
Inhibited Type Spindle Oils ? Specification ( First Revision )
-
-
Indigenous
28.
 IS 12203 : 1999
Reviewed In : 2019
Lithium base grease for automotive purposes - Specification (First Revision)
November, 2019
-
Indigenous
29.
 IS 12790 : 1999
Reviewed In : 2019
Non - Soap grease - Specification (First Revision)
November, 2019
-
Indigenous
30.
 IS 12927 : 2004
Reviewed In : 2019
Glass mould oils - Specification (First Revision)
November, 2019
-
Indigenous
31.
 IS 13256 : 1992
Reviewed In : 2019
Air compressor lubricants - Types daa and dab - Specification
November, 2019
-
Indigenous
32.
 IS 13656 : 2019
Internal combustion engine crankcase oils for automotive application (Diesel And Gasoline) - Specification (Third Revision)
-
1
Indigenous
33.
 IS 13796 : 2004
Reviewed In : 2019
Molybdenum disulphide powder for lubricants - Specification (First Revision)
November, 2019
-
Indigenous
34.
 IS 13797 : 2021
Molybdenum Disulphide Dispersion in Oil - Specification (first revision)
-
Indigenous
35.
 IS 13913 : 2020
Molybdenum Disulphide, Paste ? Specification ( First Revision )
-
-
Indigenous
36.
 IS 14234 (Part 1) : 2002
Reviewed In : 2018
Reaffirmed but not taken up for revision
Lubricants for air - Cooled spark - Ignition engines - Specification: Part 1 two - Stroke spark - Ignition engines (First Revision)
February, 2018
-
Indigenous
37.
 IS 14234 (Part 2) : 2017

Reviewed In : 2024
Lubricants for Spark-Ignition Air-Cooled Gasoline Engines — Specification Part 2 Four-Stroke Spark-Ignition Air-Cooled Engines for Scooters, Mopeds and Motorcycles
April, 2024
-
Indigenous
38.
 IS 14383 : 1996
Reviewed In : 2018
Reaffirmed but not taken up for revision
Silicone greases - Specification
February, 2018
-
Indigenous
39.
 IS 14384 : 1996
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Colloidal graphite dispersion in oil - Specification
April, 2024
-
Indigenous
40.
 IS 14385 : 1996
Reviewed In : 2024
Aluminium cold rolling oils - Specification
April, 2024
-
Indigenous
41.
 IS 14745 : 1999
Reviewed In : 2019
Thermic fluids - Specification
November, 2019
-
Indigenous
42.
 IS 14779 : 2000
Reviewed In : 2016
Reaffirmed but not taken up for revision
General purpose oil based temporary corrosion preventives - Specification
May, 2016
-
Indigenous
43.
 IS 14847 : 2000
Reviewed In : 2016
Reaffirmed but not taken up for revision
Lithium complex grease for industrial purposes - Specification
May, 2016
-
Indigenous
44.
 IS 15112 (Part 1) : 2002
ISO 12925-1
Reviewed In : 2024
General classification of lubricants, industrial oils and related products: Part 1 class l
April, 2024
-
Identical under dual numbering
45.
 15178 : 2021
ISO 7745 : 2010
Hydraulic Fluid Power - Fire-Resistant ( FR ) Fluids - Requirements and Guidelines for Use ( First Revision )
-
Identical under dual numbering
46.
 IS 1589 : 1994
Reviewed In : 2024
Oil, cylinder - Specification (First Revision)
April, 2024
-
Indigenous
47.
 IS 1628 : 1986
Reviewed In : 2024
Specification for axle oil (Second Revision)
April, 2024
-
Indigenous
48.
 IS 16775 : 2018
ISO/TS 11365 : 2011
Reviewed In : 2024
Petroleum and related products - Guidance for the maintenance and use of triaryl phosphate ester turbine - Control fluids
April, 2024
-
Identical under dual numbering
49.
 IS 16852 : 2018
ISO/TS 11366 : 2011
Reviewed In : 2023
Reaffirmed but not taken up for revision
Petroleum and related products - Guidance for in - Servicing of lubricating oils for steam, gas and combined - Cycle turbines
July, 2023
-
Indigenous
50.
 IS 16909 : 2018

Reviewed In : 2023
Girth gear lubricants - Specification
July, 2023
-
Indigenous
51.
 IS 17382 : 2021
Syn Gas Ammonia Turbo Compressor Lubricating Oils Specification
-
Indigenous
52.
 IS 1758 : 1986
Reviewed In : 2024
Specification for jute batching oil (Second Revision)
April, 2024
-
Indigenous
53.
 IS 18722 (Part 1) : 2024
VIRGIN AND RE-REFINED BASE OILS OF MINERAL ORIGIN � SPECIFICATION Part 1 : Group I to Group III Base Oils
-
Indigenous
54.
 IS 2297 : 1997
Reviewed In : 2019
Gear lubricants, compounded - Specification (Third Revision)
November, 2019
-
Indigenous
55.
 IS 2664 : 1980
Reviewed In : 2019
Specification for quenching oil (Second Revision)
November, 2019
1
Indigenous
56.
 IS 3065 : 2021
cutting oil neat
-
Indigenous
57.
 IS 3098 : 1983
Reviewed In : 2019
Specification for oil, hydraulic, mineral oil type (Second Revision)
November, 2019
-
Indigenous
58.
 IS 408 : 2020
Grease No. 0, Graphited — Specification ( Third Revision )
-
1
Indigenous
59.
 IS 4543 : 1977
Reviewed In : 2019
Specification marquenching oil (First Revision)
November, 2019
1
Indigenous
60.
 IS 4578 : 1997
Reviewed In : 2019
Lubricants - Lubricating oil for refrigeration machinery - Specification (Second Revision)
November, 2019
1
Indigenous
61.
 IS 493 (Part 1) : 2019


Reaffirmed but not taken up for revision
Specification for general purpose machinery and spindle oils: Part 1 machinery oils (Second Revision)
-
-
Indigenous
62.
 IS 493 (Part 2) : 2019


Reaffirmed but not taken up for revision
Specification for general purpose machinery and spindle oils: Part 2 spindle oils (Second Revision)
-
-
Indigenous
63.
 IS 495 : 2023
Graphite Flake for Lubricants - Specification
-
Indigenous
64.
 IS 506 : 2019


Reaffirmed but not taken up for revision
Automotive and other general purpose grease ? specification (Fourth Revision)
-
-
Indigenous
65.
 IS 507 : 1993
Reviewed In : 2021
General purpose grease for defence applications - Specification (Third Revision)
December, 2021
-
Indigenous
66.
 IS 508 : 2022
Grease Graphited - Specification (fifth revision)
-
Indigenous
67.
 IS 5730 : 1970
Reviewed In : 2019
Specification for volatile corrosion inhibitor powder
November, 2019
-
Indigenous
68.
 IS 5759 : 2006
Reviewed In : 2024
Antifreeze coolant - Specification (Second Revision)
April, 2024
-
Indigenous
69.
 IS 6049 : 1971
Reviewed In : 2024
Code of practice for application of temporary corrosion preventives
April, 2024
1
Indigenous
70.
 IS 6050 : 1971
Reviewed In : 2019
Specification for temporary corrosion preventives, strippable, hot dipping type
November, 2019
2
Indigenous
71.
 IS 6263 : 2018


Reaffirmed but not taken up for revision
Volatile corrosion inhibitor (Vci) treated paper - Specification (First Revision)
-
-
Indigenous
72.
 IS 6552 : 1987
Reviewed In : 2019
Specification for straight mineral high demulsibility oils (First Revision)
November, 2019
-
Indigenous
73.
 IS 719 : 2022
Antifriction Bearing Grease (third revision)
-
Indigenous
74.
 IS 720 : 2022
Locomotive Greases
-
Indigenous
75.
 IS 7514 : 2020
Grease, Low Temperature ? Specification ( Second Revision )
-
-
Modified/Technically Equivalent
76.
 IS 7623 : 2019
Multipurpose industrial grease - Specification (Third Revision)
-
-
Indigenous
77.
 IS 8406 : 1993
Reviewed In : 2024
Gear lubricants for enclosed industrial gear drives - Specification (Second Revision)
April, 2024
1
Indigenous
78.
 IS 8654 : 2019
Automotive hydraulic brake fluid, heavy duty - Specification (Third Revision)
-
-
Indigenous
79.
 IS 9136 : 2022
Calcium Complex Grease - Specification (second revision)
-
Indigenous
80.
 IS 9182 (Part 1) : 1993
ISO 3156
Reviewed In : 2019
Lubricants for wire ropes and fibre cores - Specification: Part 1 lubricants for fibre core of wire - Ropes (First Revision)
November, 2019
-
Indigenous
81.
 IS 9182 (Part 2) : 1993
ISO 3156
Reviewed In : 2019
Lubricants for wire ropes and - Fibre cores - Specification part - 2 lubricants for wire strands and ropes . (First Revision)
November, 2019
-
Indigenous
82.
 IS 9182 (Part 3) : 1993
ISO 3156
Reviewed In : 2019
Lubricants for wire ropes and fibre cores - Specification: Part 3 lubricants for rope dressing in service (First Revision)
November, 2019
-
Indigenous
83.
 IS 9466 : 2020
Viscosity Classification For Industrial Liquid Lubricants ( First Revision )
-
-
Modified/Technically Equivalent
84.
 IS 9554 : 1980
Reviewed In : 2019
Specifications for lubricants for open gears
November, 2019
1
Indigenous
85.
 IS 958 : 2020
Temporary Corrosion Preventives, Grease Type, Soft Film ? Specification ( Third Revision )
-
-
Indigenous
86.
 IS 9611 : 1980
Reviewed In : 2019
Specifications for cutting oil soluble, clear
November, 2019
1
Indigenous
87.
 IS 9917 : 2022
Calcium Base Heat Stable Grease - Specification (second revision)
-
Indigenous

Standards Under Develpoment

Projects Approved

SI. No.
Doc No
TITLE
No Records Found

Preliminary Draft Standards

SI. No.
Doc No
TITLE
No Records Found

Drafts Standards in WC Stage

SI. No.
Doc No
TITLE
1
PCD 25 (23378)
BIODEGRADABLE LUBRICATING GREASES SPECIFICATION
2
PCD 25 (26822)
Revision of: IS 13656:2019
INTERNAL COMBUSTION ENGINE CRANKCASE OILS FOR AUTOMOTIVE APPLICATION DIESEL AND GASOLINE SPECIFICATION
3
PCD 25 (26883)
Revision of: IS 4543:1977
MARQUENCHING OILS SPECIFICATION
4
PCD 25 (26917)
Revision of: IS 4578:1997
LUBRICANTS LUBRICATING OIL FOR REFRIGERATION MACHINERY SPECIFICATION

Draft Standards Completed WC Stage

SI. No.
Doc No
TITLE
1
PCD 25 (14904)
All weather antiwear hydraulic oils - Specification
2
PCD 25 (22800)
Revision of: IS 14234:2017
LUBRICANTS FOR SPARK-IGNITION AIR-COOLED GASOLINE ENGINES SPECIFICATION Part 2 Four-Stroke Spark-Ignition Air-Cooled Engines for Scooters Mopeds and Motorcycles
3
PCD 25 (25017)
LUBRICANTS INDUSTRIAL OILS AND RELATED PRODUCTS CLASS L FAMILY H HYDRAULIC SYSTEMS SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HETG HEPG HEES AND HEPR
4
PCD 25 (25088)
Revision of: IS 11186:1985
SPECIFICATION FOR SYNTHETIC GRINDING FLUID
5
PCD 25 (25117)
Revision of: IS 507:1993
GENERAL PURPOSE GREASE FOR DEFENCE APPLICATIONS SPECIFICATION
6
PCD 25 (25217)
Revision of: IS 8406:1993
GEAR LUBRICANTS FOR ENCLOSED INDUSTRIAL GEAR DRIVES SPECIFICATION
7
PCD 25 (25403)
Revision of: IS 16775:2018
PETROLEUM AND RELATED PRODUCTS REQUIREMENTS AND GUIDANCE FOR THE MAINTENANCE OF TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS
8
PCD 25 (25990)
Revision of: 15178:2021
HYDRAULIC FLUID POWER FIRE-RESISTANT FLUIDS REQUIREMENTS AND GUIDELINES FOR USE

Finalized Draft Indian Standard

SI. No.
Doc No
TITLE
1
PCD 25 (14340)
Revision of: IS 12203:1999
MULTIPURPOSE GREASE FOR AUTOMOTIVE APPLICATIONS SPECIFICATION
2
PCD 25 (14360)
Revision of: IS 10647:1983
Wheel Bearing Grease
3
PCD 25 (23946)
LUBRICANTS INDUSTRIAL OILS AND RELATED PRODUCTS CLASS L FAMILY H HYDRAULIC SYSTEMS SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE HFAS HFB HFC HFDR AND HFDU

Finalized Draft Indian Standards under Print

SI. No.
Doc No
TITLE
1
PCD 25 (18597)

Revision of: IS 6552:1987
Straight mineral high demulsibility oils - Specification
2
PCD 25 (18660)

Revision of: IS 2664:1980
Quenching oil - Specification Third Revision
3
PCD 25 (23352)

Revision of: IS 13256:1992
LUBRICANTS INDUSTRIAL OILS AND RELATED PRODUCTS CLASS L FAMILY D COMPRESSORS PART 1 SPECIFICATIONS OF CATEGORIES DAA AND DAB LUBRICANTS FOR RECIPROCATING AND DRIP FEED ROTARY AIR COMPRESSORS


Aspect Wise Report

 
 Product:   73
 Code of Practices :    4
 Methods of Test :   0
 Terminology :   0
 Dimensions :   0
 System Standard :   0
 Safety Standard :   0
 Others :    9
 Service Specification :    0
 Process Specification :    0
 Unclassified :    0
 


Annexure-I :List of Indian Standards Withdrawn/Superseded

SI. No.
IS No.
Title
1.
 IS 1088 : 1987
Reviewed In : 2019
Specification for lubricants for clock like mechanisms and precision instruments Second Revison
2.
 IS 14234 : 1996
Reviewed In : 2013
Lubricants for Two-stroke Spark Ignition Air-cooled Gasoline Engines
3.
 IS 8654 : 2001
Reviewed In : 2011
Automotive Hydraulic Brake Fluid Heavy Duty


Annexure-II :List of Indian Product Standards

SI. No.
IS No. & Year
Title
1.
 IS 1012 : 2002
Reviewed In : 2018
Reaffirmed but not taken up for revision
Turbine lubricating oils - Specification Third Revision
2.
 IS 10522 : 1983
ISO 3448
Reviewed In : 2019
Specification for antiwear hydraulic oil
3.
 IS 10532 (Part 1) : 1983
Reviewed In : 2019
Specification for fire - Resistant hydraulic fluids Part i dilute emulsions for powered supports
4.
 IS 10532 (Part 2) : 1983
Reviewed In : 2019
Specification for fire - Resistant hydraulic fluids - Part 2 invert emulsions Water - In - Oil type
5.
 IS 10532 (Part 3) : 1983
Reviewed In : 2019
Specificaiton for fire - Resistant hydraulic fluids - Part 3 water glycol type
6.
 IS 10532 (Part 4) : 2019

Reviewed In : 2024
Fire resistant hydraulic fluids - Specification Part 4 phosphate esters type First Revision
7.
 IS 10532 (Part 5) : 2016

Reviewed In : 2021
Fire resistant hydraulic fluids - Specification Part 5 organic ester type
8.
 IS 10647 : 1983
Reviewed In : 2019
Specification for wheel bearing grease
9.
 IS 1083 : 2022
Industrial White Oil - Specification Second Revision
10.
 IS 1115 : 1986
Reviewed In : 2024
Specification for general purpose cutting oil soluble Second Revision
11.
 IS 1118 : 2019
Gear lubricants multipurpose Extreme Pressure Gear Oil - specification Second Revision
12.
 IS 11186 : 1985
Reviewed In : 2024
Specification for synthetic grinding fluid
13.
 IS 1153 : 2021
Temporary Corrosion Preventives Hard Film Solvent Deposited
14.
 IS 1154 : 2022
Temporary Corrosion Preventive Fluid Soft Film Solvent Deposited Water Displacing - Specification second revision
15.
 IS 11637 : 2022
Calcium Based EP Grease - Specification first revision
16.
 IS 11656 : 1986
Reviewed In : 2024
Specification for antiwear hydraulic oil extra heavy duty type
17.
 IS 11695 : 2020
Inhibited Type Machinery Oils Specification First Revision
18.
 IS 11696 : 2020
Inhibited Type Spindle Oils Specification First Revision
19.
 IS 12203 : 1999
Reviewed In : 2019
Lithium base grease for automotive purposes - Specification First Revision
20.
 IS 12790 : 1999
Reviewed In : 2019
Non - Soap grease - Specification First Revision
21.
 IS 12927 : 2004
Reviewed In : 2019
Glass mould oils - Specification First Revision
22.
 IS 13256 : 1992
Reviewed In : 2019
Air compressor lubricants - Types daa and dab - Specification
23.
 IS 13656 : 2019
Internal combustion engine crankcase oils for automotive application Diesel And Gasoline - Specification Third Revision
24.
 IS 13796 : 2004
Reviewed In : 2019
Molybdenum disulphide powder for lubricants - Specification First Revision
25.
 IS 13797 : 2021
Molybdenum Disulphide Dispersion in Oil - Specification first revision
26.
 IS 13913 : 2020
Molybdenum Disulphide Paste Specification First Revision
27.
 IS 14234 (Part 1) : 2002
Reviewed In : 2018
Reaffirmed but not taken up for revision
Lubricants for air - Cooled spark - Ignition engines - Specification Part 1 two - Stroke spark - Ignition engines First Revision
28.
 IS 14234 (Part 2) : 2017

Reviewed In : 2024
Lubricants for Spark-Ignition Air-Cooled Gasoline Engines Specification Part 2 Four-Stroke Spark-Ignition Air-Cooled Engines for Scooters Mopeds and Motorcycles
29.
 IS 14383 : 1996
Reviewed In : 2018
Reaffirmed but not taken up for revision
Silicone greases - Specification
30.
 IS 14384 : 1996
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Colloidal graphite dispersion in oil - Specification
31.
 IS 14385 : 1996
Reviewed In : 2024
Aluminium cold rolling oils - Specification
32.
 IS 14745 : 1999
Reviewed In : 2019
Thermic fluids - Specification
33.
 IS 14779 : 2000
Reviewed In : 2016
Reaffirmed but not taken up for revision
General purpose oil based temporary corrosion preventives - Specification
34.
 IS 14847 : 2000
Reviewed In : 2016
Reaffirmed but not taken up for revision
Lithium complex grease for industrial purposes - Specification
35.
 IS 15112 (Part 1) : 2002
ISO 12925-1
Reviewed In : 2024
General classification of lubricants industrial oils and related products Part 1 class l
36.
 15178 : 2021
ISO 7745 : 2010
Hydraulic Fluid Power - Fire-Resistant FR Fluids - Requirements and Guidelines for Use First Revision
37.
 IS 1589 : 1994
Reviewed In : 2024
Oil cylinder - Specification First Revision
38.
 IS 1628 : 1986
Reviewed In : 2024
Specification for axle oil Second Revision
39.
 IS 16909 : 2018

Reviewed In : 2023
Girth gear lubricants - Specification
40.
 IS 17382 : 2021
Syn Gas Ammonia Turbo Compressor Lubricating Oils Specification
41.
 IS 1758 : 1986
Reviewed In : 2024
Specification for jute batching oil Second Revision
42.
 IS 18722 (Part 1) : 2024
VIRGIN AND RE-REFINED BASE OILS OF MINERAL ORIGIN SPECIFICATION Part 1 Group I to Group III Base Oils
43.
 IS 2297 : 1997
Reviewed In : 2019
Gear lubricants compounded - Specification Third Revision
44.
 IS 2664 : 1980
Reviewed In : 2019
Specification for quenching oil Second Revision
45.
 IS 3065 : 2021
cutting oil neat
46.
 IS 3098 : 1983
Reviewed In : 2019
Specification for oil hydraulic mineral oil type Second Revision
47.
 IS 408 : 2020
Grease No 0 Graphited Specification Third Revision
48.
 IS 4543 : 1977
Reviewed In : 2019
Specification marquenching oil First Revision
49.
 IS 4578 : 1997
Reviewed In : 2019
Lubricants - Lubricating oil for refrigeration machinery - Specification Second Revision
50.
 IS 493 (Part 1) : 2019


Reaffirmed but not taken up for revision
Specification for general purpose machinery and spindle oils Part 1 machinery oils Second Revision
51.
 IS 493 (Part 2) : 2019


Reaffirmed but not taken up for revision
Specification for general purpose machinery and spindle oils Part 2 spindle oils Second Revision
52.
 IS 495 : 2023
Graphite Flake for Lubricants - Specification
53.
 IS 506 : 2019


Reaffirmed but not taken up for revision
Automotive and other general purpose grease specification Fourth Revision
54.
 IS 507 : 1993
Reviewed In : 2021
General purpose grease for defence applications - Specification Third Revision
55.
 IS 508 : 2022
Grease Graphited - Specification fifth revision
56.
 IS 5730 : 1970
Reviewed In : 2019
Specification for volatile corrosion inhibitor powder
57.
 IS 5759 : 2006
Reviewed In : 2024
Antifreeze coolant - Specification Second Revision
58.
 IS 6050 : 1971
Reviewed In : 2019
Specification for temporary corrosion preventives strippable hot dipping type
59.
 IS 6263 : 2018


Reaffirmed but not taken up for revision
Volatile corrosion inhibitor Vci treated paper - Specification First Revision
60.
 IS 6552 : 1987
Reviewed In : 2019
Specification for straight mineral high demulsibility oils First Revision
61.
 IS 719 : 2022
Antifriction Bearing Grease third revision
62.
 IS 720 : 2022
Locomotive Greases
63.
 IS 7514 : 2020
Grease Low Temperature Specification Second Revision
64.
 IS 7623 : 2019
Multipurpose industrial grease - Specification Third Revision
65.
 IS 8406 : 1993
Reviewed In : 2024
Gear lubricants for enclosed industrial gear drives - Specification Second Revision
66.
 IS 9136 : 2022
Calcium Complex Grease - Specification second revision
67.
 IS 9182 (Part 1) : 1993
ISO 3156
Reviewed In : 2019
Lubricants for wire ropes and fibre cores - Specification Part 1 lubricants for fibre core of wire - Ropes First Revision
68.
 IS 9182 (Part 2) : 1993
ISO 3156
Reviewed In : 2019
Lubricants for wire ropes and - Fibre cores - Specification part - 2 lubricants for wire strands and ropes First Revision
69.
 IS 9182 (Part 3) : 1993
ISO 3156
Reviewed In : 2019
Lubricants for wire ropes and fibre cores - Specification Part 3 lubricants for rope dressing in service First Revision
70.
 IS 9554 : 1980
Reviewed In : 2019
Specifications for lubricants for open gears
71.
 IS 958 : 2020
Temporary Corrosion Preventives Grease Type Soft Film Specification Third Revision
72.
 IS 9611 : 1980
Reviewed In : 2019
Specifications for cutting oil soluble clear
73.
 IS 9917 : 2022
Calcium Base Heat Stable Grease - Specification second revision