Programme of work

  1. Home
  2. Programme of work

BUREAU OF INDIAN STANDARDS


Metallurgical Engineering Department

Programme of Work




MTD11 : Welding General and its Applications sectional Committee


  • Scope : Standardization in the field of welding fundamentals, consumables, equipments (other than electrical), testing, training, safety etc. and all welding processes including joining, surfacing, repairing and thermal cutting, soldering, brazing, friction welding, explosive, ultrasonic welding, beam welding (laser and electron beam), etc.
  • Liaison :
    ISO/TC 44 - Welding and allied processes - Observer (O)
    ISO/TC 44/SC 10 - Quality management in the field of welding - Participating (P)
    ISO/TC 44/SC 11 - Qualification requirements for welding and allied processes personnel - Participating (P)
    ISO/TC 44/SC 12 - Soldering materials - Observer (O)
    ISO/TC 44/SC 13 - Brazing materials and processes - Observer (O)
    ISO/TC 44/SC 14 - Welding and brazing in aerospace
    ISO/TC 44/SC 15 - Underwater welding - Participating (P)
    ISO/TC 44/SC 3 - Welding consumables - Participating (P)
    ISO/TC 44/SC 5 - Testing and inspection of welds - Participating (P)
    ISO/TC 44/SC 6 - Resistance welding and allied mechanical joining - Participating (P)
    ISO/TC 44/SC 7 - Representation and terms - Participating (P)
    ISO/TC 44/SC 8 - Equipment for gas welding, cutting and allied processes - Observer (O)
    ISO/TC 44/SC 9 - Health and safety - Observer (O)

Published Standards

SI. No.
IS No.
Title
Reaffirmation Details
No. of Amendments
Degree of Equivalence
1.
 IS 10178 : 1995
Reviewed In : 2024
Co2 gas shielded metal - Arc welding of structural steels - Recommendations (First Revision)
February, 2024
-
Indigenous
2.
 IS 10186 : 2015
Reviewed In : 2020
Recommendations for manual tungsten insert gas arc welding of copper and copper alloys (First Revision)
March, 2020
-
Indigenous
3.
 IS 10234 : 1982
Reviewed In : 2019
Reaffirmed but not taken up for revision
Recommendations for general pipeline welding
January, 2019
1
Indigenous
4.
 IS 1024 : 1999
Reviewed In : 2024
Use of welding in bridges and structures subject to dynamic loading - Code of practice (Second Revision)
January, 2024
-
Indigenous
5.
 IS 10793 (Part 1) : 2018
ISO 6520-1 : 2007
Reviewed In : 2023
Welding and allied processes - Classification of geometric imperfections in metallic materials: Part 1 fusion welding (First Revision)
September, 2023
-
Identical under dual numbering
6.
 IS 10793 (Part 2) : 2018
ISO 6520-2 : 2013
Reviewed In : 2023
Welding and Allied Processes - Classification of Geometric Inperfections in Metallic Materials Part 2 Welding with Pressure (First Revision)
September, 2023
-
Identical under dual numbering
7.
 IS 10801 : 1984
Reviewed In : 2021
Recommended procedure for heat treatment of welded fabrication
March, 2021
-
Indigenous
8.
 IS 10803 : 1984
Reviewed In : 2019
Reaffirmed but not taken up for revision
Method of sampling and preparation of weld pad for chemical analysis of weld metal from covered electrodes for manual metal arc welding
January, 2019
1
Indigenous
9.
 IS 10811 : 1984
Reviewed In : 2021
Specification for oxygen and acetylene manifold regulators for welding, cutting and related processes
March, 2021
-
Indigenous
10.
 IS 10842 (Part 1) : 2019
ISO 17642-1 : 2004
Reviewed In : 2023
Destructive Tests on Welds in Metallic Materials - Cold Cracking Tests for Weldments - Arc Welding Processes Part 1 General ( First Revision )
September, 2023
-
Identical under dual numbering
11.
 IS 10842 (Part 2) : 2019
ISO 17642-2 : 2005
Reviewed In : 2023
Destructive Tests on Welds in Metallic Materials - Cold Cracking Tests for Weldments - Arc Welding Processes Part 2 Self-Restraint Tests ( First Revision )
September, 2023
-
Identical under dual numbering
12.
 IS 10842 (Part 3) : 2019
ISO 17642-3 : 2005
Reviewed In : 2023
Destructive Tests on Welds in Metallic Materials - Cold Cracking Tests for Weldments - Arc Welding Processes Part 3 Externally Loaded Test ( First Revision )
September, 2023
-
Identical under dual numbering
13.
 IS 11368 (Part 1) : 1985
Reviewed In : 2024
Comparison of indian and overseas classification and coding of welding filler materials: Part 1 flux coated mild steel and medium tensile steel stick electrodes for manual metal - Arc welding
January, 2024
1
Indigenous
14.
 IS 1179 : 1967
Reviewed In : 2024
Specification for equipment for eye and face protection during welding (First Revision)
January, 2024
2
Indigenous
15.
 IS 11802 : 2024
ISO 3690:2018
Welding and Allied Processes — Determination of Hydrogen Content in Arc Weld Metal (First Revision)
-
Identical under dual numbering
16.
 IS 11991 : 1986
Reviewed In : 2019
Reaffirmed but not taken up for revision
Recommended practice for flash butt welding of tubes, rods and other sections in carbon and alloy steels
January, 2019
1
Indigenous
17.
 SP 12 : 1975
Reviewed In : 2021
Handbook for gas welders
March, 2021
-
Indigenous
18.
 IS 1261 : 1959
Reviewed In : 2019
Reaffirmed but not taken up for revision
Code of practice for seam welding in mild steel
January, 2019
1
Indigenous
19.
 IS 1278 : 1972
Reviewed In : 2024
Specification for filler rods and wires for gas welding (Second Revision)
January, 2024
2
Indigenous
20.
 IS 13007 : 2018
ISO 6848 : 2015
Reviewed In : 2023
Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (First Revision)
March, 2023
-
Identical under dual numbering
21.
 IS 13043 : 1991
Reviewed In : 2024
Covered manual metal arc welding electrodes - Determination of efficiency, metal recovery and deposition co - Efficient
January, 2024
-
Not Equivalent
22.
 IS 1323 : 1982
Reviewed In : 2019
Reaffirmed but not taken up for revision
Code of practice for Oxy - Acetylene welding for structural work in mild (Second Revision)
January, 2019
-
Indigenous
23.
 IS 13851 : 1993
Reviewed In : 2019
Reaffirmed but not taken up for revision
Storage and redrying of covered electrodes before use - Recommendations
January, 2019
2
Indigenous
24.
 IS 1393 : 1961
Reviewed In : 2019
Reaffirmed but not taken up for revision
Code of practice for training and testing of oxy - Acetylene welders
January, 2019
-
Indigenous
25.
 IS 1395 : 1982
Reviewed In : 2024
Specification for low and medium alloy steel covered electrodes for manual metal arc welding (Third Revision
January, 2024
1
Not Equivalent
26.
 IS 14289 : 1995
Reviewed In : 2021
Manual tungsten insert gas arc welding of nickel and nickel alloys - Recommendations (Second Revision)
March, 2021
-
Indigenous
27.
 IS 14419 : 1996
Reviewed In : 2019
Reaffirmed but not taken up for revision
Acceptance standards for radiographic examination of welds for ships - Recommendations
January, 2019
-
Indigenous
28.
 IS 15326 (Part 1) : 2024
ISO 3834-1:2021
Quality Requirements for Fusion Welding of Metallic Materials Part 1 Criteria for the Selection of the Appropriate Level of Quality Requirements (Second Revision)
-
Identical under dual numbering
29.
 IS 15326 (Part 1) : 2018
ISO 3834-1 : 2005
Reviewed In : 2023
Quality requirements for fusion welding of metallic materials: Part 1 criteria for the selection of the appropriate level of quality requirements (First Revision)
January, 2023
-
Identical under dual numbering
30.
 IS 15326 (Part 2) : 2022
ISO 3834-2:2021
Quality requirements for fusion welding of metallic materials: Part 2 comprehensive quality requirements Second Revision
-
Identical under dual numbering
31.
 IS 15326 (Part 3) : 2022
ISO 3834-3:2021
Quality requirements for fusion welding of metallic materials: Part 3 standard quality requirements Second Revision
-
Identical under dual numbering
32.
 IS 15326 (Part 4) : 2022
ISO 3834-4:2021
Quality requirements for fusion welding of metallic materials: Part 4 elementary quality requirements Second Revision
-
Identical under dual numbering
33.
 IS 15326 (Part 5) : 2019
ISO 3834-5 : 2015
Reviewed In : 2024
Quality requirements for fusion welding of metallic materials: Part 5 documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834 - 2, ISO 3834 - 3 or ISO 3834 - 4 (First Revision)
January, 2024
-
Identical under dual numbering
34.
 IS 15327 : 2022
ISO 14731:2019
Welding coordination - Tasks and responsibilities (Second Revision)
-
Identical under dual numbering
35.
 IS 15387 : 2003
ISO 5830:1984
Reviewed In : 2023
Resistance spot welding - Male electrode caps
September, 2023
-
Identical under dual numbering
36.
 IS 15728 : 2022
ISO 15620:2019
Welding - Friction welding of metallic materials (First Revision)
-
Identical under dual numbering
37.
 IS 15769 : 2008
Reviewed In : 2021
Flux cored (Tubular) electrodes for gas shielded and self - Shielded metal welding of carbon or carbon - Manganese steel
March, 2021
1
Indigenous
38.
 IS 15946 : 2018
ISO 9539:2010
Reviewed In : 2023
Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes (First Revision)
September, 2023
-
Identical under dual numbering
39.
 IS 15977 : 2013
Reviewed In : 2024
Classification and acceptance tests for bare solid wire electrodes and wire flux combination for submerged arc welding of structrual steel - Specification
February, 2024
-
Indigenous
40.
 IS 16002 (Part 1) : 2012
ISO 17652-1:2003
Reviewed In : 2023
Welding - Test for shop primers in relation to welding and allied processes: Part 1 general requirements
September, 2023
-
Identical under dual numbering
41.
 IS 16002 (Part 2) : 2012
ISO 17652-2:2003
Reviewed In : 2023
Welding - Test for shop primers in relation to welding and allied processes: Part 2 welding properties of shop primers
September, 2023
-
Identical under dual numbering
42.
 IS 16002 (Part 3) : 2012
ISO 17652-3:2003
Reviewed In : 2023
Welding - Test for shop primers in relation to welding and allied processes: Part 3 thermal cutting
September, 2023
-
Identical under dual numbering
43.
 IS 16002 (Part 4) : 2012
ISO 17652-4:2003
Reviewed In : 2023
Welding - Test for shop primers in relation to welding and allied processes: Part 4 emission of fumes and gases
September, 2023
-
Identical under dual numbering
44.
 IS 16003 : 2022
ISO 15607:2019
Specification and qualification of welding procedures for metallic materials General rules (First Revision)
-
Identical under dual numbering
45.
 IS 16277 (Part 1) : 2014
ISO 10882-1 : 2011
Reviewed In : 2023
Health and Safety in Welding and Allied Processes Sampling of Airborne Particles and Gases in the Operator’s Breathing Zone Part 1 Sampling of Airborne Particles
September, 2023
-
Identical under dual numbering
46.
 IS 16278 (Part 1) : 2014
ISO 15011-1 : 2009
Reviewed In : 2023
Health and safety in welding and allied processes - Laboratory method for sampling fumes and gases: Part 1 determination of fume emission rate during arc welding and collection of fumes for analysis
September, 2023
-
Identical under dual numbering
47.
 IS 16278 (Part 2) : 2018
ISO 15011-2 : 2009
Reviewed In : 2023
Health and Safety in Welding and Allied Processes — Laboratory Method for Sampling Fume and Gases Part 2 Determination of the Emission Rates of Carbon Monoxide (CO), Carbon Dioxide (CO2), Nitrogen Monoxide (NO) and Nitrogen Dioxide (NO2) During Arc Welding, Cutting and Gouging
September, 2023
-
Identical under dual numbering
48.
 IS 16681 (Part 1) : 2022
ISO 21904-2:2020
Health and safety in welding and allied processes - Equipment for capture and separation of welding fume: Part 1 Requirements for testing and marking of separation efficiency (First Revision)
-
Identical under dual numbering
49.
 ISIHB MMAW : 1965
Reviewed In : 2019
Reaffirmed but not taken up for revision
ISI Handbook of Manual Metal-arc Welding for Welders
January, 2019
-
Indigenous
50.
 IS 18224 : 2023
General standard for qualification and certification of welding inspection personnel
-
Indigenous
51.
 IS 18632 : 2024
ISO 14344:2010
Welding consumables - Procurement of filler materials and fluxes
-
Identical under dual numbering
52.
 IS 18641 : 2024
ISO 544:2017
Welding consumables � Technical delivery conditions for filler materials and fluxes � Type of product, dimensions, tolerances and markings
-
Identical under dual numbering
53.
 IS 18646 : 2024
ISO 6947:2019
Welding and allied processes � Welding positions
-
Identical under dual numbering
54.
 IS 18734 : 2024
ISO 6847:2020
Welding consumables � Deposition of a weld metal pad for chemical analysis
-
Identical under dual numbering
55.
 IS 18738 (Part 1) : 2024
ISO 15792-1:2020
Welding consumables � Methods of test Part 1 Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys
-
Identical under dual numbering
56.
 IS 18738 (Part 2) : 2024
ISO 15792-2:2020
Welding consumables � Methods of test Part 2 Preparation of single-run and two-run technique test pieces and specimens in steel
-
Identical under dual numbering
57.
 IS 18738 (Part 3) : 2024
ISO 15792-3:2011
Welding consumables � Methods of test Part 3 Classification testing of positional capacity and root penetration of welding consumables in a fillet weld
-
Identical under dual numbering
58.
 IS 18783 : 2024
ISO 14175:2008
Welding Consumables � Gases and Gas Mixtures for Fusion Welding and Allied Processes
-
Identical under dual numbering
59.
 IS 18828 : 2024
ISO 14732 : 2013
Welding personnel � Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
-
Identical under dual numbering
60.
 IS 2751 : 1979
Reviewed In : 2019
Reaffirmed but not taken up for revision
Code of practice for welding of mild steel plain and deformed bars for reinforced concrete construction (First Revision)
January, 2019
-
Indigenous
61.
 IS 2811 : 1987
Reviewed In : 2019
Reaffirmed but not taken up for revision
Recommendations for manual tungsten inert - Gas arc welding of austenitic stainless steel (First Revision)
January, 2019
1
Indigenous
62.
 IS 2812 : 1993
Reviewed In : 2019
Reaffirmed but not taken up for revision
Recommendations for manual tungsten inert gas arc welding of aluminium and aluminium alloys (First Revision)
January, 2019
2
Indigenous
63.
 IS 2927 : 1975
Reviewed In : 2024
Specification for brazing alloys (First Revision)
January, 2024
1
Indigenous
64.
 IS 3016 : 1982
Reviewed In : 2021
Code of practice for fire precautions in welding and cutting operations (First Revision)
March, 2021
-
Indigenous
65.
 IS 3023 : 2013
Reviewed In : 2024
Recommened practice for building - Up by thermal spraying (First Revision)
February, 2024
-
Indigenous
66.
 IS 3525 : 1998
Reviewed In : 2019
Reaffirmed but not taken up for revision
Metal arc welding for hull construction of merchant ship in carbon and carbon manganese steels - Code of practice (Second Revision)
January, 2019
-
Indigenous
67.
 IS 3600 (Part 1) : 2022
ISO 9018 : 2015
Method of testing fusion welded joints and weld metal in steel Part 1 Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (Third revision of IS 3600 (Part 1))
-
Identical under dual numbering
68.
 IS 3600 (Part 2) : 2022
ISO 9016 : 2012
Method of testing fusion welded joints and weld metal in steel Part 2 Destructive tests on welds in metallic materials Impact tests Test specimen location notch orientation and examination (Third Revision of IS 3600 (Part 2))
-
Identical under dual numbering
69.
 IS 3600 (Part 3) : 2018
ISO 4136:2001
Reviewed In : 2023
Method of testing fusion welded joints and weld metal in steel: Part 3 destructive tests on welds in metallic materials - Transverse tensile test (Fourth Revision)
February, 2023
-
Identical under dual numbering
70.
 IS 3600 (Part 4) : 2024
ISO 5178:2019
Fusion Welded Joints and Weld Metal in Steel — Method of Test Part 4 Destructive Tests on Welds in Metallic Materials — Longitudinal Tensile Test on Weld Metal in Fusion Welded Joints (Third Revision)
-
Identical under dual numbering
71.
 IS 3600 (Part 4) : 1984
Reviewed In : 2021
Method of testing fusion welded joints and weld metal in steel: Part 4 longitudinal tensile test on cylindrical all weld metal test pieces using butt joints (Second Revision)
March, 2021
-
Identical under dual numbering
72.
 IS 3600 (Part 5) : 2018
ISO 5173:1981
Reviewed In : 2023
Method of testing fusion welded joints and weld metal in steel: Part 5 destructive tests on welds in metallic materials - Bend tests (Third Revision)
June, 2023
-
Identical under dual numbering
73.
 IS 3600 (Part 8) : 2024
ISO 9017 : 2017
Fusion Welded Joints and Weld Metal in Steel — Method of Test Part 8 Destructive Tests on Welds in Metallic Materials — Fracture Test (Third Revision)
-
Identical under dual numbering
74.
 IS 3600 (Part 8) : 1985
Reviewed In : 2024
Method of testing fusion welded joints and weld metal in steel: Part 8 nick break test and fillet weld fracture test (Second Revision)
January, 2024
-
Identical under dual numbering
75.
 IS 3600 (Part 9) : 2022
ISO 17639 : 2003
Method of testing fusion welded joints and weld metal in steel Part 9 Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds (Third Revision of IS 3600 (Part 9))
-
Identical under dual numbering
76.
 IS 4353 : 1995
Reviewed In : 2021
Submerged arc welding of mild steel and low alloy steels - Recommendations (First Revision)
March, 2021
-
Indigenous
77.
 IS 4943 : 1968
Reviewed In : 2019
Reaffirmed but not taken up for revision
Assessment of butt and fillet fusion welds in steel sheet, plate and pipe
January, 2019
-
Not Equivalent
78.
 IS 4972 (Part 1) : 2022
ISO 8430-1 : 2016
Resistance Spot Welding Part 1 Electrode Holders - Taper Fixing 1:10 (First Revision of IS 4972)
-
Identical under dual numbering
79.
 IS 4972 (Part 2) : 2022
ISO 8430-2 : 2016
Resistance Spot Welding Part 2 Electrode Holders - Morse Taper Fixing (First Revision of IS 4972)
-
Identical under dual numbering
80.
 IS 4972 (Part 3) : 2022
ISO 8430-3 : 2016
Resistance Spot Welding Part 3 Electrode Holders — Parallel Shank Fixing For End Thrust (First revision of IS 4972)
-
Identical under dual numbering
81.
 IS 4972 (Part 4) : 2022
ISO 5183 - 1 : 1983
Resistance Spot Welding Part 4 Electrode Adaptors Male Taper 1:10 — Conical Fixing Taper 1:10 (First revision of IS 4972)
-
Identical under dual numbering
82.
 IS 4972 (Part 5) : 2022
ISO 5183-2 : 2000
Resistance Spot Welding Part 5 Electrode Adaptors Male Taper 1:10 - Parallel Shank Fixing For End Thrust Electrodes (First Revision of IS 4972)
-
Identical under dual numbering
83.
 IS 4972 (Part 6) : 2022
ISO 5184 : 1979
Resistance Spot Welding Part 6 Straight Resistance Spot Welding Electrodes (First Revision of IS 4972)
-
Identical under dual numbering
84.
 IS 4972 (Part 7) : 2022
ISO 1089 : 1980
Resistance Spot Welding Part 7 Electrode Taper Fits For Spot Welding Equipment -- Dimensions (First Revision of IS 4972)
-
Identical under dual numbering
85.
 IS 4972 (Part 8) : 2022
ISO 5182 : 2016
Resistance spot welding Part 8 Materials for electrodes and ancillary equipment (First Revision of IS 4972)
-
Identical under dual numbering
86.
 IS 5139 : 1995
Reviewed In : 2021
Repair of cast iron castings by Oxy - Acetylene and manual metal arc welding - Recommendations (First Revision)
March, 2021
-
Indigenous
87.
 IS 5206 : 1983
Reviewed In : 2024
Specification for covered electrodes for manual metal arc welding of stainless steel and other similar high alloy steels (First Revision)
January, 2024
-
Not Equivalent
88.
 IS 5511 : 1991
Reviewed In : 2024
Covered electrodes for manual metal arc welding of cast iron - Specification (First Revision)
January, 2024
1
Not Equivalent
89.
 IS 5530 : 2005
Reviewed In : 2023
Recommendations for production, rectification and repair of steel castings by metal arc welding process (Second Revision)
September, 2023
-
Indigenous
90.
 IS 5687 : 1970
Reviewed In : 2019
Reaffirmed but not taken up for revision
Glossary of terms relating to welding of plastics
January, 2019
-
Indigenous
91.
 IS 5856 : 2022
ISO 14343:2017
Welding consumables Wire electrodes strip electrodes wires and rods for arc welding of stainless and heat resisting steels Classification (Third Revision)
-
Identical under dual numbering
92.
 IS 5857 : 1970
Reviewed In : 2024
Specification for nickel and nickel alloy bare solid welding rods and electrodes
January, 2024
-
Indigenous
93.
 IS 5897 : 1985
Reviewed In : 2024
Specification for aluminium and aluminium alloy welding rods and wires and magnesium alloy welding rods (First Revision)
January, 2024
-
Not Equivalent
94.
 IS 5898 : 1970
Reviewed In : 2024
Specification for copper and copper alloy bare solid welding rods and electrodes
January, 2024
-
Not Equivalent
95.
 IS 5922 : 1970
Reviewed In : 2019
Reaffirmed but not taken up for revision
Qualifying tests for welders engaged in aircraft welding
January, 2019
1
Indigenous
96.
 IS 6016 : 2009
ISO 3253:1998
Reviewed In : 2021
Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes (Second Revision)
March, 2021
-
Identical under dual numbering
97.
 IS 6409 : 1971
Reviewed In : 2019
Reaffirmed but not taken up for revision
Code of practice for Oxy - Acetylene flame cleaning
January, 2019
-
Indigenous
98.
 IS 6419 : 1996
Reviewed In : 2021
Welding rods and bare electrodes for gas shielded arc welding of structural steel - Specification (First Revision)
March, 2021
1
Indigenous
99.
 IS 6431 : 1971
Reviewed In : 2019
Reaffirmed but not taken up for revision
Tolerances on dimensions of plates cut by flame
January, 2019
-
Indigenous
100.
 IS 6560 : 2017
ISO 21952 : 2012
Reviewed In : 2023
Welding Consumables- Wire Electrodes, Wires, Rods and Deposits for Gas Shielded Arc Welding of Creep-Resisting Steels- Classfication (Second Revision)
March, 2023
-
Identical under dual numbering
101.
 IS 6901 : 2018
ISO 2503:2009
Reviewed In : 2023
Gas welding equipment - Pressure regulators and pressure regulators with flow - Metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPA) (Third Revision)
September, 2023
-
Identical under dual numbering
102.
 IS 6916 : 1973
Reviewed In : 2019
Reaffirmed but not taken up for revision
Code of practice for fabrication welding of steel castings
January, 2019
-
Indigenous
103.
 IS 7273 : 1974
Reviewed In : 2019
Reaffirmed but not taken up for revision
Methods of testing fusion welded joints in aluminium and aluminium alloys
January, 2019
-
Not Equivalent
104.
 IS 7303 : 1974
Reviewed In : 2024
Specification for covered electrodes for surfacing of metal by manual metal arc welding
February, 2024
-
Indigenous
105.
 IS 7307 (Part 1) : 1974
Reviewed In : 2019
Reaffirmed but not taken up for revision
Approval tests for welding procedures: Part 1 fusion welding of steel
January, 2019
-
Indigenous
106.
 IS 7310 (Part 1) : 2019
ISO 9606-1 : 2012
Reviewed In : 2023
Qualification Testing of Welders - Fusion Welding Part 1 Steels (First Revision)
September, 2023
-
Identical under dual numbering
107.
 IS 7310 (Part 2) : 2019
ISO 9606-2 : 2004
Reviewed In : 2023
Qualification Test of Welders - Fusion Welding Part 2 Aluminium and Aluminium Alloys ( First Revision )
September, 2023
-
Identical under dual numbering
108.
 IS 7310 (Part 3) : 2019
ISO 9606-3 : 1999
Reviewed In : 2023
Approval Testing of Welders - Fusion Welding Part 3 Copper and Copper Alloys ( First Revision )
September, 2023
-
Identical under dual numbering
109.
 IS 7310 (Part 4) : 2019
ISO 9606-4 : 1999
Reviewed In : 2023
Approval Testing of Welders - Fusion Welding Part 4 Nickel and Nickel Alloys ( First Revision )
September, 2023
-
Identical under dual numbering
110.
 IS 7310 (Part 5) : 2019
ISO 9606-5 : 2000
Reviewed In : 2023
Approval Testing of Welders - Fusion Welding Part 5 Titanium and Titanium Alloys, Zirconium and Zirconium Alloys (First Revision)
September, 2023
-
Identical under dual numbering
111.
 IS 7318 (Part 1) : 1974
Reviewed In : 2023
Approval test for welders when welding procedure approval is not required: Part 1 fusion welding of steel
September, 2023
-
Not Equivalent
112.
 IS 7318 (Part 2) : 1974
Reviewed In : 2023
Approval tests for welders when welding procedure approval is not required: Part 2 tig or mig welding of aluminium and its alloys
September, 2023
-
Not Equivalent
113.
 IS 7653 : 1975
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for manual blow pipes for welding and cutting
January, 2019
-
Indigenous
114.
 IS 8002 : 1976
Reviewed In : 2019
Reaffirmed but not taken up for revision
Recommended procedure for welding of flexible pvc (Flexible Polyvinyl Chloride)
January, 2019
-
Indigenous
115.
 IS 8004 : 1976
Reviewed In : 2019
Reaffirmed but not taken up for revision
Recommended procedure welding of rigid PVC for (Rigid Polyvinyl Chloride)
January, 2019
-
Indigenous
116.
 IS 812 (Part 1) : 1957
Reviewed In : 2024
Glossary of terms relating to welding and cutting of metals
January, 2024
-
Identical under dual numbering
117.
 IS 812 (Part 2) : 2024
ISO/TR 25901-1:2016
Welding and Allied Processes — Vocabulary Part 1 General Terms (First Revision)
-
Identical under dual numbering
118.
 IS 812 (Part 3) : 2024
ISO 25901-2:2022
Welding and Allied Processes — Vocabulary Part 2 Health and Safety (First Revision)
-
Identical under dual numbering
119.
 IS 812 (Part 4) : 2024
ISO/TR 25901-3:2016
Welding and Allied Processes — Vocabulary Part 3 Welding Processes (First Revision)
-
Identical under dual numbering
120.
 IS 812 : 2024
ISO/TR 25901-4:2016
Welding and Allied Processes — Vocabulary Part 4 Arc Welding (First Revision)
-
Identical under dual numbering
121.
 IS 813 (Part 1) : 2018
ISO 2553:2013
Reviewed In : 2023
Welding and Allied Processes Symbolic Representation on Drawings-Welded Joints (Second Revision)
June, 2023
-
Identical under dual numbering
122.
 IS 813 (Part 2) : 2018
ISO 4063 : 2009
Reviewed In : 2023
Welding and allied processes: Part 2 nomenclature of processes and reference numbers (Second Revision)
January, 2023
-
Identical under dual numbering
123.
 IS 814 : 2004
Reviewed In : 2021
Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision)
March, 2021
3
Not Equivalent
124.
 IS 816 : 1969
Reviewed In : 2019
Reaffirmed but not taken up for revision
Code of practice for use of metal arc welding for general construction in mild steel (First Revision)
January, 2019
1
Indigenous
125.
 IS 817 : 1966
Reviewed In : 2019
Reaffirmed but not taken up for revision
Code of practice for training and testing of metal arc welders (Revised)
January, 2019
-
Indigenous
126.
 IS 817 (Part 1) : 1992
Reviewed In : 2019
Reaffirmed but not taken up for revision
Training of welders - Code of practice: Part 1 manual metal arc welding (Second Revision)
January, 2019
-
Indigenous
127.
 IS 817 (Part 2) : 1996
Reviewed In : 2019
Reaffirmed but not taken up for revision
Training of welders - Code of practice: Part 2 oxyfuel welding (Second Revision)
January, 2019
-
Indigenous
128.
 IS 818 : 1968
Reviewed In : 2019
Reaffirmed but not taken up for revision
Code of practice for safety and health requirements in electric and gas welding and cutting operations (First Revision)
January, 2019
-
Indigenous
129.
 IS 819 : 1957
Reviewed In : 2019
Reaffirmed but not taken up for revision
Code of practice for resistance spot welding for light assemblies in mild steel
January, 2019
1
Indigenous
130.
 IS 822 : 1970
Reviewed In : 2019
Reaffirmed but not taken up for revision
Code of procedure for inspection of welds
January, 2019
-
Indigenous
131.
 IS 8363 : 1976
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for bare wire electrodes for electroslag welding of steels
January, 2019
1
Indigenous
132.
 IS 8455 : 1977
Reviewed In : 2019
Reaffirmed but not taken up for revision
Recommended procedure for welding of polyethylene
January, 2019
1
Indigenous
133.
 IS 8484 : 1998
Reviewed In : 2021
Metal powders for welding electrodes - Specification (First Revision)
March, 2021
-
Indigenous
134.
 IS 8666 : 1977
Reviewed In : 2024
Specification for copper and copper alloy covered electrodes for manual metal arc welding
January, 2024
-
Not Equivalent
135.
 IS 8736 : 1977
Reviewed In : 2024
Specification for nickel and nickel alloy covered electrodes for metal arc welding
January, 2024
-
Not Equivalent
136.
 IS 8987 : 1978
Reviewed In : 2019
Reaffirmed but not taken up for revision
Recommended practices for air carbon arc gauging and cutting
January, 2019
1
Indigenous
137.
 IS 9006 : 1978
Reviewed In : 2019
Reaffirmed but not taken up for revision
Recommended practice for welding of clad steels
January, 2019
-
Not Equivalent
138.
 IS 9495 : 1980
Reviewed In : 2019
Reaffirmed but not taken up for revision
Test for brazeability of brazing alloys
January, 2019
-
Indigenous
139.
 IS 9524 : 1980
Reviewed In : 2019
Reaffirmed but not taken up for revision
Recommended procedure for repair welding of steel components by aluminothermic process
January, 2019
1
Indigenous
140.
 IS 9595 : 1996
Reviewed In : 2019
Reaffirmed but not taken up for revision
Metal - Arc welding of carbon and carbon manganese steels - Recommendations (Fifth Revision)
January, 2019
-
Indigenous

Standards Under Develpoment

Projects Approved

SI. No.
Doc No
TITLE
1
MTD 11 (23179)
Revision of: IS 814:2004
Welding consumables Covered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification Seventh Revision
2
MTD 11 (26895)
Revision of: IS 13043:1991
Covered manual metal arc welding electrodes Determination of efficiency metal recovery and deposition co-efficient First Revision

Preliminary Draft Standards

SI. No.
Doc No
TITLE
No Records Found

Drafts Standards in WC Stage

SI. No.
Doc No
TITLE
1
MTD 11 (24613)
Welding rods and bare electrodes for gas shielded arc welding of structural steel - Specification First Revision Amendment - 2
2
MTD 11 (26452)
Revision of: IS 3600:2018
Fusion welded joints and weld metal in steel Method of test Part 3 Destructive tests on welds in metallic materials Transverse tensile test Fifth Revision
3
MTD 11 (26453)
Revision of: IS 3600:2018
Fusion welded joints and weld metal in steel Method of test Part 5 Destructive tests on welds in metallic materials Bend tests Fourth Revision
4
MTD 11 (26455)
Revision of: IS 3600:2022
Fusion welded joints and weld metal in steel Method of test Part 9 Destructive tests on welds in metallic materials Macroscopic and microscopic examination of welds Fourth Revision
5
MTD 11 (26678)
Revision of: IS 15326:2019
Quality requirements for fusion welding of metallic materials Part 5 Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2 ISO 3834-3 or ISO 3834-4 Second Revision
6
MTD 11 (26891)
Revision of: IS 4972:2022
Resistance spot welding Part 7 Electrode taper fits for spot welding equipment Dimensions Second Revision

Draft Standards Completed WC Stage

SI. No.
Doc No
TITLE
1
MTD 11 (21536)
Revision of: IS 5139:1995
Repair of cast iron castings by oxy-acetylene and manual metal arc welding-recommendations Second Revision
2
MTD 11 (22285)
Revision of: IS 1024:1999
Use of welding in bridges and structures subject to dynamic loading - Code of practice Third Revision
3
MTD 11 (22960)
Brazing - Qualification testing of brazers and brazing operators
4
MTD 11 (22974)
Brazing - Specification and qualification of brazing procedures for metallic materials
5
MTD 11 (26451)
Revision of: IS 3600:2022
Fusion welded joints and weld metal in steel Method of test Part 2 Destructive tests on welds in metallic materials Impact tests Test specimen location notch orientation and examination Fourth Revision

Finalized Draft Indian Standard

SI. No.
Doc No
TITLE
No Records Found

Finalized Draft Indian Standards under Print

SI. No.
Doc No
TITLE
No Records Found


Aspect Wise Report

 
 Product:   24
 Code of Practices :    64
 Methods of Test :   15
 Terminology :   2
 Dimensions :   8
 System Standard :   2
 Safety Standard :   3
 Others :    14
 Service Specification :    0
 Process Specification :    0
 Unclassified :    0
 


Annexure-I :List of Indian Standards Withdrawn/Superseded

SI. No.
IS No.
Title
1.
 IS 10793 : 1983
Reviewed In : 2021
Classification of imperfections in metallic fusion welds with explanations
2.
 IS 10842 : 1984
Reviewed In : 2016
Evaluation procedure for Y-groove weld crackability test in structural stee
3.
 IS 1181 : 1967
Qualifying Tests For Metal Arc Welders engaged In Welding Structures Other Than Pipes
4.
 IS 1442 : 1964
Specification for precast reinforced concrete street lighting poles First Revision
5.
 IS 192 : 1956
Silver Solder
6.
 IS 24 : 1956
Brazing Solder
7.
 IS 2680 : 1964
Filler rods and wire for inert gas tungsten arc welding
8.
 IS 3600 (Part 6) : 1983
ISO 5177:1984
Reviewed In : 2013
Method of Testing Fusion Welded Joints and Weld Metal in Steel Part 6 Transverse side bend test on butt welds
9.
 IS 3600 (Part 7) : 1985
Reviewed In : 2019
Method of testing fusion welded joints and weld metal in steel Part 7 longitudinal root and face bend test on butt welds Second Revision
10.
 IS 3613 : 1974
Reviewed In : 2010
Acceptance tests for wire flux combination for submerged arc welding
11.
 IS 4972 : 1968
Reviewed In : 2019
Specification for resistance spot - Welding electrodes
12.
 IS 5462 : 1969
Colour code for identification of covered electrodes and metal arc welding
13.
 IS 6227 : 1971
Code of practice for use of metal arc welding in tubular structure
14.
 IS 6901 : 2009
ISO 2503:1998
Gas welding equipment - Pressure regulators for gas cylinders used in welding cutting and allied processes up to 300 bar
15.
 IS 7280 : 1974
Reviewed In : 2013
Bare wire electrodes for submerged arc welding of structural steels
16.
 IS 813 : 1986
Reviewed In : 2013
Scheme Of Symbols For Welding
17.
 IS 815 : 1974
Classification coding of covered electrodes for metal arc welding of structural steels
18.
 IS 823 : 1964
Code of procedure for manual metal arc welding of mild steel


Annexure-II :List of Indian Product Standards

SI. No.
IS No. & Year
Title
1.
 IS 10811 : 1984
Reviewed In : 2021
Specification for oxygen and acetylene manifold regulators for welding cutting and related processes
2.
 IS 1179 : 1967
Reviewed In : 2024
Specification for equipment for eye and face protection during welding First Revision
3.
 IS 1278 : 1972
Reviewed In : 2024
Specification for filler rods and wires for gas welding Second Revision
4.
 IS 1395 : 1982
Reviewed In : 2024
Specification for low and medium alloy steel covered electrodes for manual metal arc welding Third Revision
5.
 IS 15387 : 2003
ISO 5830:1984
Reviewed In : 2023
Resistance spot welding - Male electrode caps
6.
 IS 15769 : 2008
Reviewed In : 2021
Flux cored Tubular electrodes for gas shielded and self - Shielded metal welding of carbon or carbon - Manganese steel
7.
 IS 15946 : 2018
ISO 9539:2010
Reviewed In : 2023
Gas welding equipment - Materials for equipment used in gas welding cutting and allied processes First Revision
8.
 IS 2927 : 1975
Reviewed In : 2024
Specification for brazing alloys First Revision
9.
 IS 4972 (Part 8) : 2022
ISO 5182 : 2016
Resistance spot welding Part 8 Materials for electrodes and ancillary equipment First Revision of IS 4972
10.
 IS 5206 : 1983
Reviewed In : 2024
Specification for covered electrodes for manual metal arc welding of stainless steel and other similar high alloy steels First Revision
11.
 IS 5511 : 1991
Reviewed In : 2024
Covered electrodes for manual metal arc welding of cast iron - Specification First Revision
12.
 IS 5857 : 1970
Reviewed In : 2024
Specification for nickel and nickel alloy bare solid welding rods and electrodes
13.
 IS 5897 : 1985
Reviewed In : 2024
Specification for aluminium and aluminium alloy welding rods and wires and magnesium alloy welding rods First Revision
14.
 IS 5898 : 1970
Reviewed In : 2024
Specification for copper and copper alloy bare solid welding rods and electrodes
15.
 IS 6016 : 2009
ISO 3253:1998
Reviewed In : 2021
Gas welding equipment - Hose connections for equipment for welding cutting and allied processes Second Revision
16.
 IS 6419 : 1996
Reviewed In : 2021
Welding rods and bare electrodes for gas shielded arc welding of structural steel - Specification First Revision
17.
 IS 6560 : 2017
ISO 21952 : 2012
Reviewed In : 2023
Welding Consumables- Wire Electrodes Wires Rods and Deposits for Gas Shielded Arc Welding of Creep-Resisting Steels- Classfication Second Revision
18.
 IS 7303 : 1974
Reviewed In : 2024
Specification for covered electrodes for surfacing of metal by manual metal arc welding
19.
 IS 7653 : 1975
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for manual blow pipes for welding and cutting
20.
 IS 814 : 2004
Reviewed In : 2021
Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification Sixth Revision
21.
 IS 8363 : 1976
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for bare wire electrodes for electroslag welding of steels
22.
 IS 8484 : 1998
Reviewed In : 2021
Metal powders for welding electrodes - Specification First Revision
23.
 IS 8666 : 1977
Reviewed In : 2024
Specification for copper and copper alloy covered electrodes for manual metal arc welding
24.
 IS 8736 : 1977
Reviewed In : 2024
Specification for nickel and nickel alloy covered electrodes for metal arc welding