BUREAU OF INDIAN STANDARDS
Programme of Work
PCD27 : Methods of Sampling and Test for Plastics
- Scope : To formulate Indian Standards for terminology, methods of sampling and test for plastics.
-
Liaison :ISO/TC 61/SC 1 - Terminology - Participating (P)
ISO/TC 61/SC 1/WG 1 - Terms and definitions
ISO/TC 61/SC 1/WG 3
ISO/TC 61/SC 10 - Cellular plastics - Participating (P)
ISO/TC 61/SC 10/WG 10 - Plastic insulation
ISO/TC 61/SC 10/WG 11 - Physical and chemical properties
ISO/TC 61/SC 10/WG 12 - Mechanical and endurance properties
ISO/TC 61/SC 10/WG 14 - Products and materials
ISO/TC 61/SC 11/WG 13 - Fiber reinforced plastics modular framework
ISO/TC 61/SC 11/WG 5 - Polymeric adhesives
ISO/TC 61/SC 12 - Thermosetting materials - Participating (P)
ISO/TC 61/SC 12/WG 5 - Unsaturated polyesters, epoxy resins and other resins
ISO/TC 61/SC 12/WG 6 - Polyurethane raw materials
ISO/TC 61/SC 13/WG 1 - Reinforcements and reinforcement products
ISO/TC 61/SC 13/WG 2 - Laminates and moulding compounds
ISO/TC 61/SC 13/WG 7 - Composites and metal assemblies
ISO/TC 61/SC 14/WG 1 - Terminology, classifications and general guidance
ISO/TC 61/SC 14/WG 2 - Biodegradability
ISO/TC 61/SC 14/WG 3 - Biobased plastics
ISO/TC 61/SC 14/WG 4 - Characterization of plastics leaked into the environment (including microplastics) and quality control criteria of respective methods
ISO/TC 61/SC 14/WG 5 - Mechanical and chemical recycling
ISO/TC 61/SC 2/WG 1 - Static behavior
ISO/TC 61/SC 2/WG 2 - Hardness and surface properties
ISO/TC 61/SC 2/WG 3 - Impact and high speed properties
ISO/TC 61/SC 2/WG 5 - Temperature dependent behavior
ISO/TC 61/SC 4 - Burning behaviour - Participating (P)
ISO/TC 61/SC 4/WG 2 - Smoke opacity and corrosivity
ISO/TC 61/SC 4/WG 8 - Ignitability and fire growth
ISO/TC 61/SC 4/WG 9 - Composites and semi-finished products
ISO/TC 61/SC 5 - Physical-chemical properties - Participating (P)
ISO/TC 61/SC 5/WG 11 - Analytical methods
ISO/TC 61/SC 6 - Ageing, chemical and environmental resistance - Participating (P)
ISO/TC 61/SC 6/WG 2 - Exposure to light
ISO/TC 61/SC 6/WG 3 - Various exposures
ISO/TC 61/SC 9/WG 18 - Preparation of test specimens
ISO/TC 61/SC 9/WG 20 - Poly(vinyl chloride)
ISO/TC 61/SC 9/WG 26 - Thermoplastic elastomers
ISO TC 61/SC 2 - Mechanical behavior - Participating (P)
ISO TC 61/SC 9 - Thermoplastic materials - Participating (P)
ISO TC 61/SC 11 - Products - Participating (P)
ISO TC 61/SC 13 - Composites and reinforcement fibres - Participating (P)
ISO TC 61/SC 14 - Environmental aspects - Participating (P)
|
IS 11022 : 1984 Reviewed In : 2020 |
Methods of sampling and test for glues (bone, skin/fleshings and fish glues)
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 13055 : 2024 |
Methods of sampling and test for anaerobic adhesives and sealants (First Revision)
|
-
|
Indigenous
|
||
|
IS/ISO 13360-4-5) : 2016 ISO 11443 : 1995 |
Plastics - Methods of Testing part 4 Rheological Properties Section 5 Determination of the Fluidity of Plastics Using Capillary and Slit-Die Rheometers
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 1) : 1992 Reviewed In : 2023 |
Plastics - Methods of testing: Part 1 introduction
|
February, 2023
|
-
|
Indigenous
|
|
|
IS 13360 (Part 2/Sec 1) : 2016 ISO 293 : 2004 Reviewed In : 2024 |
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens Section 1 plastics - Compression moulding of test specimens of thermoplastic materials (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 2/Sec 2) : 2013 ISO 295 : 2004 Reviewed In : 2023 |
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens Section 2 compression moulding of test specimens of thermosetting materials (First Revision)
|
February, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 2/Sec 3) : 2019 ISO 294-1 : 2017 |
Plastics ? Methods of Testing Part 2 Sampling and Preparation of Test Specimens Section 3 Injection moulding of test specimens of thermoplastic materials - General principles and moulding of multipurpose and bar test specimens ( First Revision )
|
-
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 2/Sec 4) : 2021 ISO 2818: 2018 |
Plastics - Methods of testing: Part 2 Sampling and preparation of test specimens Section 4 Preparation of test specimens by machining Second Revision
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 2/Sec 5) : 2018 ISO 3167 : 2014 Reviewed In : 2023 |
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens section 5 multipurpose test specimens (Second Revision)
|
March, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 2/Sec 7) : 2021 ISO 294-3 |
Plastics - Methods of testing: Part 2 Sampling and preparation of test specimens Section 7 Injection moulding of test specimens of thermoplastic materials - Small plates (Third Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 2/Sec 9) : 2021 ISO 294-2: 2018 |
PLASTICS - Methods of Testing: Part 2 Sampling and Preparation of Test Specimens Section 9 Injection Moulding of Test Specimens of Thermoplastic Materials - Small Tensile Bars First Revision
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 2/Sec 10) : 2006 Reviewed In : 2021 |
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens section 10 injection moulding of test specimens of thermosetting powder moulding compounds (Pmcs) - General principles and moulding of multipurpose test specimens
|
April, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 2/Sec 11) : 2006 Reviewed In : 2021 |
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens section 11 injection moulding offest specimens of thermosetting powder moulding compounds (Pmcs) - Small plates
|
April, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 3/Sec 2) : 1997 ISO 60 Reviewed In : 2022 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 2 determination of apparent density of material that can be poured from a specified funnel
|
May, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 3/Sec 3) : 1997 ISO 61 Reviewed In : 2022 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 3 determination of apparent density of moulding material that cannot be poured from a specified funnel
|
May, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 3/Sec 4) : 1995 ISO 171 Reviewed In : 2023 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 4 determination of bulk factor of moulding materials
|
February, 2023
|
1
|
Identical under dual numbering
|
|
|
IS 13360 (Part 3/Sec 5) : 2013 ISO 2577 : 2007 Reviewed In : 2023 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 5 thermosetting moulding materials - Determination of shrinkage (First Revision)
|
February, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 3/Sec 6) : 2000 ISO 4591 Reviewed In : 2021 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 6 film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll by gravimetric techniques (Gravimetric Thickness)
|
April, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 3/Sec 7) : 1999 ISO 1675 Reviewed In : 2020 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 7 liquid resins - Determination of density by the pyknometer method
|
July, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 3/Sec 9) : 1999 Reviewed In : 2020 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 9 determination of moisture in plastics by coulometric regeneration of phosphorus pentoxide
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 13360 (Part 3/Sec 10) : 2021 ISO 1183-1: 2019 |
Plastics Methods of Testing Part: 3 Physical and Dimensional Properties Section 10 Determination of Density of Non-cellular Plastics Immersion Method Liquid Pyknometer Method and Titration Method First Revision
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 3/Sec 11) : 2021 ISO 1183-2: 2019 |
Plastics Methods of Testing: Part 3 Physical and Dimensional Properties Section 11 Determination of Density of Non-cellular Plastics Density Gradient Column Method First Revision
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 3/Sec 12) : 2016 ISO 1183-3 : 1999 Reviewed In : 2021 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 12 determination of density of non - Cellular plastics - Gas pyknometer method
|
April, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 4/Sec 1) : 2000 ISO 1133 Reviewed In : 2018 |
Plastics - Methods of testing: Part 4 rheological properties section 1 determination of the melt mass - Flow rate (Mfj3)And the melt volume - Flow rate (Mvr) of thermoplastics (First Revision)
|
February, 2018
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 4/Sec 1/Sub-Sec 1) : 2018 ISO 1133-1:2011 |
Plastics - Methods of testing Part 4 Rheological properties- Section 1 Determination of melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics – Sub section 1 Standard method
|
-
|
|||
|
IS 13360 (Part 4/Sec 1/Sub-Sec 2) : 2018 ISO 1133-2:2011 Reviewed In : 2023 |
Plastics - Methods of Testing - Part 4 : Rheological Properties - Section 1 : Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics
|
March, 2023
|
-
|
||
|
IS 13360 (Part 4/Sec 2) : 1999 Reviewed In : 2020 |
Plastics - Methods of testing : Part 4 Rheological properties Section 2 cup flow of phenolic and alkyd moulding materials
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 13360 (Part 4/Sec 3) : 2004 Reviewed In : 2020 |
Plastics - Methods of testing: Part 4 rhelogical properties section 3 determination of spiral flow of low - Pressure thermosetting moulding compounds
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 13360 (Part 4/Sec 4) : 1999 Reviewed In : 2020 |
Plastics - Methods of testing: Part 4 rheological properties section 4 determination of properties of polymeric materials by means of a capillary rheometer
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 13360 (Part 4/Sec 5) : 2022 ISO 11443 : 2021 |
Plastics - Methods of Testing: Part 4 Rheological Properties Section 5 Determination of the Fluidity of Plastics Using Capillary and Slit - Die Rheometers First Revision
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 5/Sec 1) : 2021 ISO 527-1: 2019 |
Plastics - Methods of testing: Part 5 Mechanical properties Section 1 Determination of tensile properties - General requirements Second Revision
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 5/Sec 2) : 2017 ISO 527-2 : 2012 Reviewed In : 2022 |
Plastics - Methods of testing: Part 5 mechanical properties section 2 determination of tensile properties - Test conditions for moulding and extrusion plastics (First Revision)
|
May, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 5/Sec 3) : 2022 ISO 527-3 : 2018 |
PLASTICS METHOD OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 3 DETERMINATION OF TENSILE PROPERTIES TEST CONDITIONS FOR FILMS AND SHEETS
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 5/Sec 4) : 2021 |
Plastics - Methods of Testing Part 5 : Mechanical Properties Sec 4 Determination of Izod Impact Strength
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 5/Sec 5) : 2017 ISO 179-1 : 2010 Reviewed In : 2022 |
Plastics - Methods of testing: Part 5 mechanical properties section 5 determination of charpy impact properties - Non - Instrumented impact test (First Revision)
|
May, 2022
|
-
|
Indigenous
|
|
|
IS 13360 (Part 5/Sec 6) : 1999 ISO 7765-1 Reviewed In : 2020 |
Plastics - Methods of testing: Part 5 mechanical properties section 8 determination of impact resistance by the free - Falling dart method - Staircase methods
|
July, 2020
|
-
|
Identical under dual numbering
|
|
|
: 2022 ISO 178 : 2019 |
PLASTICS METHOD OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 7 DETERMINATION OF FLEXURAL PROPERTIES
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 5/Sec 8) : 2013 ISO 604 : 2002 Reviewed In : 2023 |
Plastics - Methods of testing: Part 5 mechanical properties section 8 determination of compressive properties (First Revision)
|
February, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 5/Sec 10) : 2018 ISO 6383-1 : 2015 Reviewed In : 2023 |
Plastics - Methods of testing: Part 5 mechanical properties section 10 determination of tear resistance of plastics films and sheeting - Trouser tear method (First Revision)
|
September, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 5/Sec 11) : 2013 ISO 868 : 2003 Reviewed In : 2023 |
Plastics - Methods of testing: Part 5 mechanical properties section 11 determination of indentation hardness by means of durometer (Shore Hardness) (First Revision)
|
February, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 5/Sec 12) : 2017 ISO 2039-1 : 2001 Reviewed In : 2022 |
Plastics - Methods of testing: Part 5 mechanical properties section 12 determination of hardness - Ball indentation method (First Revision)
|
May, 2022
|
-
|
Indigenous
|
|
|
IS 13360 (Part 5/Sec 13) : 1992 Reviewed In : 2023 |
Plastics - Methods of testing: Part 5 mechanical properties section 13 determination of rockwell hardness
|
February, 2023
|
-
|
Indigenous
|
|
|
IS 13360 (Part 5/Sec 14) : 2001 Reviewed In : 2021 |
Plastics - Methods of testing: Part 5 mechanical properties section 14 determination of indentation hardness of rigid plastic by means of barcol impressor
|
December, 2021
|
-
|
Indigenous
|
|
|
IS 13360 (Part 5/Sec 19) : 1999 Reviewed In : 2020 |
Plastics - Methods of testing: Part 5 mechanical properties section 19 determination of resistance of plastic materials to abrasion
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 13360 (Part 5/Sec 22) : 2017 ISO 9395 : 2012 Reviewed In : 2022 |
Plastics - Methods of testing: Part 5 mechanical properties section 22 determination of resistance to wear by abrasive wheels (First Revision)
|
May, 2022
|
-
|
Indigenous
|
|
|
IS 13360 (Part 5/Sec 23) : 1996 Reviewed In : 2023 |
Plastics - Methods of testing: Part 5 mechanical properties section 23 determination of tear resistance of plastics film and sheeting - Elmendorf method
|
February, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 5/Sec 24) : 1999 ISO 7765-2 Reviewed In : 2020 |
Plastics - Methods of testing: Part 5 mechanical properties section 24 determination of impact resistance by the free - Failing dart method - Instrumented punctureTest
|
July, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 5/Sec 25) : 2004 ISO 527-4 Reviewed In : 2020 |
Plastics - Methods of testing: Part 5 mechanical properties section 25 determination of tensile properties - Test conditions for isotropic and orthotropic fibre - Reinforced plastic composites
|
July, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 5/Sec 26) : 2023 ISO 527-5 : 2021 |
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 26 DETERMINATION OF TENSILE PROPERTIES TEST CONDITIONS FOR UNIDIRECTIONAL FIBRE-REINFORCED PLASTIC COMPOSITES
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 5/Sec 27) : 2022 ISO 8256: 2004 |
Plastics — Methods of Testing Part 5 Mechanical Properties Section 27 Determination of tensile-impact strength
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 6/Sec 1) : 2018 ISO 306 : 2013 Reviewed In : 2023 |
Plastics - Methods of testing : Part 6 thermal properties, Section 1 determination of vicat softening temperature of thermoplastic materials (Second Revision)
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 6/Sec 3) : 2022 ISO 75-1 : 2020 |
PLASTICS METHOD OF TESTING PART 6 THERMAL PROPERTIES SECTION 3 DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD GENERAL TEST METHOD
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 6/Sec 6) : 2019 ISO 4589-1 : 2017 Reviewed In : 2024 |
Plastics ? Methods of Testing Part 6 Thermal Properties Section 6 Flammability by oxygen index ? General requirements ( Second Revision )
|
March, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 6/Sec 9) : 2001 Reviewed In : 2021 |
Plastics - Methods of testing: Part 6 thermal properties section 9 determination of density of smoke from the burning or decomposition of plastics
|
December, 2021
|
-
|
Indigenous
|
|
|
IS 13360 (Part 6/Sec 10) : 2013 ISO 3146: 2000 Reviewed In : 2023 |
Plastics - Methods of testing: Part 6 thermal properties section 10 determination of melting behaviour (Melting Temperature Or Melting Range) of semi - Crystalline polymers by capillary tube and polarizing - Microscope methods (First Revision)
|
February, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 6/Sec 10) : 2023 ISO 3146 : 2022 |
PLASTICS METHODS OF TESTING PART 6 THERMAL PROPERTIES SECTION 10 DETERMINATION OF MELTING BEHAVIOUR MELTING TEMPERATURE OR MELTING RANGE OF SEMI-CRYSTALLINE POLYMERS BY CAPILLARY TUBE AND POLARIZING - MICROSCOPE METHODS
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 6/Sec 11) : 2004 ISO 974 Reviewed In : 2020 |
Plastics - Methods of testing: Part 6 thermal properties section 11 determination of the brittleness temperature by impact
|
July, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 6/Sec 14) : 2004 Reviewed In : 2020 |
Plastics - Methods of testing: Part 6 thermal properties section 14 standard test method for coefficient of linear thermal expansion of plastics between - 30°C and 30°C with a vitreous silica dilatometer
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 13360 (Part 6/Sec 17) : 2017 ISO 75-2 :2013 Reviewed In : 2022 |
Plastics - Methods of testing: Part 6 thermal properties section 17 determination of temperature of deflection under load - Plastics and ebonite (Second Revision)
|
May, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 6/Sec 18) : 2013 ISO 75-3: 2004 Reviewed In : 2023 |
Plastics - Methods of testing: Part 6 thermal properties section 18 determination of temperature of deflection under load - High - Strength thermosetting laminates and long - Fibre - Reinforced plastics (First Revision)
|
February, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 6/Sec 19) : 2019 ISO 4589 -2 : 2017 Reviewed In : 2024 |
Plastics ? Methods of Testing Part 6 Thermal Properties Section 19 Flammability by oxygen index ? Ambient temperature test ( First Revision )
|
March, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 6/Sec 20) : 2019 ISO 4589-3 : 2017 Reviewed In : 2024 |
Plastics ? Methods of Testing Part 6 Thermal Properties Section 20 Flammability by oxygen index ? Elevated temperature test ( First Revision )
|
March, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 6/Sec 21) : 2004 ISO 871 Reviewed In : 2020 |
Plastics - Methods of testing: Part 6 thermal properties section 21 determination of ignition temperature using a hot - Air furnace
|
July, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 6/Sec 21) : 2023 ISO 871 : 2022 |
PLASTICS METHODS OF TESTING PART 6 THERMAL PROPERTIES SECTION 21 DETERMINATION OF IGNITION TEMPERATURE USING A HOT-AIR FURNACE
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 6/Sec 22) : 2006 ISO 2785 Reviewed In : 2021 |
Plastics - Methods of testing: Part 6 thermal properties section 22 determination of time - Temperature limits after prolonged exposure to heat
|
April, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 6/Sec 23) : 2006 Reviewed In : 2022 |
Plastics - Methods of testing: Part 6 thermal properties section 23 determination of burning behaviour of thin fiexibie verticai specimens in contact with smaii - Fiame ignition source
|
December, 2022
|
1
|
Identical under dual numbering
|
|
|
IS 13360 (Part 6/Sec 24) : 2024 ISO 9772 : 2020 |
Plastics — Methods of Testing Part 6 Thermal Properties Section 24 Cellular Plastics — Determination of Horizontal Burning Characteristics of Small Specimens Subjected to a Small Flame (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 7/Sec 1) : 2023 ISO 3915 : 2022 |
PLASTICS METHODS OF TESTING PART 7 ELECTRICAL PROPERTIES SECTION 1 MEASUREMENT OF RESISTIVITY OF CONDUCTIVE PLASTICS
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 8/Sec 1) : 2022 ISO 62 : 2008 |
Plastics Methods of Testing Part 8 PermanenceChemical Properties Section 1 Determination of Water Absorption First Revision
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 8/Sec 3) : 2018 ISO 175 : 2010 Reviewed In : 2023 |
Plastics - Methods of testing: Part 8 permanence / chemical properties section 3 determination of the effects of the immersion in liquid chemicals (First Revision)
|
September, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 8/Sec 4) : 2018 ISO 176 : 2005 Reviewed In : 2023 |
Plastics - Methods of testing: Part 8 permanece/chemical properties section 4 determination of loss of plasticizers - Activated carbon method (First Revision)
|
May, 2023
|
-
|
Indigenous
|
|
|
IS 13360 (Part 8/Sec 5) : 2019 ISO 177 : 2016 Reviewed In : 2024 |
Plastics — Methods of testing Part 8 Permanence / Chemical Properties Section 5 Determination of migration of plasticizers ( First Revision )
|
March, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 8/Sec 6) : 1997 ISO 2556 Reviewed In : 2023 |
Plastics - Methods of testing: Part 8 permanence/chemical properties section 6 determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method
|
February, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 8/Sec 8) : 2021 ISO 3451-1:2008 |
Plastics Methods of testing Part 8 Permanencechemical properties Section 8 Determination of Ash General Methods First Revision
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 8/Sec 9) : 2022 ISO 22088-3 : 2006 |
PLASTICS - METHODS OF TESTING PART 8 PERMANENCECHEMICAL PROPERTIES SECTION 9 DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC BENT STRIP METHOD
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 8/Sec 11) : 2018 ISO 22088-2 : 2006 Reviewed In : 2023 |
Plastics - Methods of testing: Part 8 performance/chemical properties section 11 determination of environmental stress cracking (Esc) - Constant - Tensile load method (First Revision)
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 8/Sec 13) : 2021 ISO 4582 : 2007 |
Plastics Methods Of Testing Part 8 Permanence chemical Properties Section 13 Determination of Changes in Colour and Variations in Properties After Exposure to Daylight Under Glass Natural Weathering or Laboratory Light Sources First Revision of IS 1
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 8/Sec 14) : 2018 ISO 4611 : 2010 Reviewed In : 2023 |
Plastics - Methods of testing: Part 8 performance/chemical properties section 14 determination of the effects of exposure to damp heat, water spray and salt mist (First Revision)
|
June, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 9/Sec 1) : 2004 ISO 489 Reviewed In : 2020 |
Plastics - Methods of testing: Part 9 optical properties section 1 determination of refractive index
|
July, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 9/Sec 5) : 1999 Reviewed In : 2020 |
Plastics - Methods of testing: Part 9 optical properties section 5 determination of haze and luminous transmittance of transparent plastics
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 13360 (Part 9/Sec 7) : 2023 |
PLASTICS METHODS OF TESTING PART 9 OPTICAL PROPERTIES Section 7 Determination of Specular Gloss of Plastic Films and Solid Plastics
|
-
|
Indigenous
|
||
|
IS 13360 (Part 9/Sec 8) : 2023 |
PLASTICS METHODS OF TESTING PART 9 OPTICAL PROPERTIES Section 8 Determination of Transparency of Plastic Sheeting
|
-
|
Indigenous
|
||
|
IS 13360 (Part 9/Sec 9) : 2001 Reviewed In : 2022 |
Plastics - Methods of testing: Part 9 optical properties section 9 determination of yellow index of plastics
|
May, 2022
|
-
|
Indigenous
|
|
|
IS 13360 (Part 9/Sec 10) : 2018 Reviewed In : 2023 |
Plastics - Methods of testing: Part 9 optical properties section 10 qualitative evaluation of the bleeding of colorants
|
October, 2023
|
-
|
Indigenous
|
|
|
IS 13360 (Part 10/Sec 4) : 2001 Reviewed In : 2021 |
Plastics - Methods of testing: Part 10 thermosetting properties section 4 determination of gel time and peak exothermic temperature of reacting thermosetting resins
|
April, 2021
|
-
|
Not Equivalent
|
|
|
IS 13360 (Part 10/Sec 5) : 2004 ISO 119 Reviewed In : 2020 |
Plastics - Methods of testing: Part 10 Resin (Thermosetting Properties) Section 5 Phenol - Formaldehyde mouldings - Determination of free phenols - Iodometric method
|
July, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 10/Sec 6) : 2004 ISO 120 Reviewed In : 2020 |
Plastics - Methods of testing: Part 10 resin (Thermosetting Properties) section 6 phenol - Formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Calorimetric comparison method
|
July, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 10/Sec 7) : 2004 ISO 308 Reviewed In : 2020 |
Plastics - Methods of testing: Part 10 resin (ThermosettlNg Properties) section 7 phenol - Formaldehyde mouldings - Determination of acetone - Soluble matter (Apparent Resin Content Of Material In The Unmoulded State)
|
July, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 11/Sec 1) : 1999 ISO 8295 Reviewed In : 2020 |
Plastics - Methods of testing part 11 special properties se&on 1 film and sheeting - Determination of coefficients of friction
|
July, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 11/Sec 3) : 2022 ISO 11502 : 2018 |
PLASTICS METHODS OF TESTING PART 11 SPECIAL PROPERTIES SECTION 3 FILM AND SHEETING DETERMINATION OF BLOCKING RESISTANCE
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 11/Sec 4) : 1999 Reviewed In : 2020 |
Plastics - Methods of testing: Part 11 special properties section 4 determination of gel count of plastics film
|
July, 2020
|
-
|
Not Equivalent
|
|
|
IS 13360 (Part 11/Sec 5) : 2001 ISO 2115 Reviewed In : 2021 |
Plastics - Methods of testing: Part 11 special properties - Section 5 determination of white point temperature and minimum film - Forming temperature
|
April, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 11/Sec 7) : 2018 ISO 6427 : 2013 Reviewed In : 2023 |
Plastics - Methods of testing: Part 11 special properties section 7 determination of matter extractable by organic solvents (Conventional Method) (First Revision)
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 11/Sec 9) : 2023 ISO 1628-1 : 2021 |
PLASTICS METHODS OF TEST PART 11 SPECIAL PROPERTIES SECTION 9 DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS GENERAL PRINCIPLES
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 11/Sec 10) : 2022 ISO 2555 : 2018 |
PLASTICS - METHODS OF TESTING PART 11 SPECIAL PROPERTIES SECTION 10 RESINS IN THE LIQUID STATE OR AS EMULSIONS OR DISPERSIONS DETERMINATION OF APPARENT VISCOSITY USING A SINGULAR CYLINDER TYPE ROTATIONAL VISCOMETER METHOD
|
-
|
Identical under dual numbering
|
||
|
IS 13360 (Part 11/Sec 11) : 1999 ISO 3219 Reviewed In : 2020 |
Plastics - Methods of testing: Part 11 special properties section 11 polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate
|
July, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 11/Sec 13) : 2006 Reviewed In : 2021 |
Plastics - Methods of testing: Part 11 special properties section 13 film and sheeting - Determination of cold - Crack temperature
|
April, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 11/Sec 14) : 2006 Reviewed In : 2021 |
Plastics - Methods of: Part 11 special properties testing section 14 film and sheeting - Determination of dimensional change on heating
|
April, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 13360 (Part 11/Sec 15) : 2022 ISO 12058-1 : 2018 |
PLASTICS - METHODS OF TESTING PART 11 SPECIAL PROPERTIES Section 15 Determination of Viscosity using a Falling-Ball Viscometer Inclined-tube method
|
-
|
Identical under dual numbering
|
||
|
IS/ISO 14851 : 2022 ISO 14851 : 2019 |
Determination of the Ultimate Aerobic Biodegradability of Plastic Materials in an Aqueous Medium Method by Measuring the Oxygen Demand in A Closed respirometer First Revision
|
-
|
Identical under single numbering
|
||
|
IS/ISO 14852 : 2021 ISO 14852 : 2021 |
Determination of the Ultimate Aerobic Biodegradability of Plastic Materials in an Aqueous Medium Method by Analysis of Evolved Carbon Dioxide First Revision
|
-
|
Identical under single numbering
|
||
|
IS/ISO 14853 : 2016 Reviewed In : 2022 |
Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production
|
March, 2022
|
-
|
Identical under single numbering
|
|
|
IS/ISO 14855-1 : 2000 ISO 14855-1 : 2012 Reviewed In : 2016 |
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide: Part 1 general method (First Revision)
|
December, 2016
|
-
|
Identical under single numbering
|
|
|
IS/ISO 14855-2 : 2018 ISO 14855-2:2018 |
DETERMINATION OF THE ULTIMATE AEROBIC BIODEGRADABILITY OF PLASTIC MATERIALS UNDER CONTROLLED COMPOSTING CONDITIONS METHOD BY ANALYSIS OF EVOLVED CARBON DIOXIDE PART 2 GRAVIMETRIC MEASUREMENT OF CARBON DIOXIDE EVOLVED IN A LABORATORY-SCALE TEST Fi
|
-
|
Identical under single numbering
|
||
|
IS/ISO 15985 : 2014 ISO 15985 : 2014 Reviewed In : 2023 |
Plastics - Determination of the ultimate anaerobic biodegradation under high - Solids anaerobic - Digestion conditions - Method by analysis of released biogas (First Revision)
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS/ISO 16929 : 2019 ISO 16929 : 2013 Reviewed In : 2024 |
Plastics - Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test First Revision
|
March, 2024
|
-
|
Identical under single numbering
|
|
|
IS/ISO 17556 : 2019 ISO 17556:2012 |
Plastics Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved First Revision
|
-
|
Identical under single numbering
|
||
|
IS 17863 (Part 1) : 2022 ISO 4892-1: 2016 |
Plastics Methods of Exposure to Laboratory Light Sources: Part 1 General Guidance
|
-
|
Identical under dual numbering
|
||
|
IS 17863 (Part 2) : 2022 ISO 4892-2:2013 |
Plastics Methods of Exposure to Laboratory Light Sources: Part 2 Xenon-Arc Lamps
|
-
|
Identical under dual numbering
|
||
|
IS 17863 (Part 3) : 2022 ISO 4892-3:2016 |
Plastics Methods of Exposure to Laboratory Light Sources: Part 3 Fluorescent UV Lamps
|
-
|
Identical under dual numbering
|
||
|
IS 17863 (Part 4) : 2022 ISO 4892-4:2013 |
Plastics Methods of Exposure to Laboratory Light Sources: Part 4 Open-Flame Carbon-Arc Lamps
|
-
|
Identical under dual numbering
|
||
|
IS 17864 : 2022 ISO 9370: 2017 |
Plastics Instrumental Determination of Radiant Exposure in Weathering Tests General Guidance and Basic Test Method
|
-
|
Identical under dual numbering
|
||
|
IS 17948 (Part 1) : 2022 ISO 16620-1 : 2015 |
PLASTICS BIOBASED CONTENT : PART 1 GENERAL PRINCIPLES
|
-
|
Identical under dual numbering
|
||
|
IS 17948 (Part 2) : 2023 ISO 16620-2 : 2019 |
PLASTICS BIOBASED CONTENT : PART 2 DETERMINATION OF BIOBASED CARBON CONTENT
|
-
|
Identical under dual numbering
|
||
|
IS 17948 (Part 3) : 2022 ISO 16620-3 : 2015 |
PLASTICS BIOBASED CONTENT : PART 3 DETERMINATION OF BIOBASED SYNTHETIC POLYMER CONTENT
|
-
|
Identical under dual numbering
|
||
|
IS 17948 (Part 4) : 2022 ISO 16620-4 : 2016 |
PLASTICS BIOBASED CONTENT : PART 4 DETERMINATION OF BIOBASED MASS CONTENT
|
-
|
Identical under dual numbering
|
||
|
IS 17948 (Part 5) : 2022 ISO 16620-5 : 2017 |
PLASTICS BIOBASED CONTENT : PART 5 DECLARATION OF BIOBASED CARBON CONTENT BIOBASED SYNTHETIC POLYMER CONTENT AND BIOBASED MASS CONTENT
|
-
|
Identical under dual numbering
|
||
|
IS 17949 (Part 1) : 2022 ISO 22526-1 : 2020 |
PLASTICS CARBON AND ENVIRONMENTAL FOOTPRINT OF BIOBASED PLASTICS : PART 1 GENERAL PRINCIPLES
|
-
|
Identical under dual numbering
|
||
|
IS 17949 (Part 2) : 2022 ISO 22526-2 : 2020 |
PLASTICS CARBON AND ENVIRONMENTAL FOOTPRINT OF BIOBASED PLASTICS : PART 2 MATERIAL CARBON FOOTPRINT AMOUNT MASS OF CO2 REMOVED FROM THE AIR AND INCORPORATED INTO POLYMER MOLECULE
|
-
|
Identical under dual numbering
|
||
|
IS 17950 (Part 1) : 2022 ISO 16014-1 : 2019 |
PLASTICS DETERMINATION OF AVERAGE MOLECULAR WEIGHT AND MOLECULAR WEIGHT DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY PART 1 GENERAL PRINCIPLES
|
-
|
Identical under dual numbering
|
||
|
IS 17950 (Part 2) : 2022 ISO 16014-2 : 2019 |
PLASTICS DETERMINATION OF AVERAGE MOLECULAR WEIGHT AND MOLECULAR WEIGHT DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY PART 2 UNIVERSAL CALIBRATION METHOD
|
-
|
Identical under dual numbering
|
||
|
IS 17950 (Part 3) : 2022 ISO 16014-3 : 2019 |
PLASTICS DETERMINATION OF AVERAGE MOLECULAR WEIGHT AND MOLECULAR WEIGHT DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY PART 3 LOW-TEMPERATURE METHOD
|
-
|
Identical under dual numbering
|
||
|
IS 17950 (Part 4) : 2022 ISO 16014-4 : 2019 |
PLASTICS DETERMINATION OF AVERAGE MOLECULAR WEIGHT AND MOLECULAR WEIGHT DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY PART 4 HIGH-TEMPERATURE METHOD
|
-
|
Identical under dual numbering
|
||
|
IS 17950 (Part 5) : 2022 ISO 16014-5 : 2019 |
PLASTICS DETERMINATION OF AVERAGE MOLECULAR WEIGHT AND MOLECULAR WEIGHT DISTRIBUTION OF POLYMERS USING SIZE-EXCLUSION CHROMATOGRAPHY PART 5 LIGHT-SCATTERING METHOD
|
-
|
Identical under dual numbering
|
||
|
IS 17972 : 2022 ISO 18830 : 2016 |
Plastics Determination of Aerobic Biodegradation of Non-Floating Plastic Materials in a SeawaterSandy Sediment Interface - Method by Measuring the Oxygen Demand In Closed Respirometer
|
-
|
Identical under dual numbering
|
||
|
IS 17973 : 2022 ISO 19679 : 2016 |
Plastics Determination of Aerobic Biodegradation of Non-Floating Plastic Materials in A SeawaterSediment Interface Method by Analysis of Evolved Carbon Dioxide
|
-
|
Identical under dual numbering
|
||
|
IS 17974 : 2022 ISO 22403 : 2020 |
Plastics — Assessment of the intrinsic biodegradability of materials exposed to marine inocula under mesophilic aerobic laboratory conditions — Test methods and requirements
|
-
|
Identical under dual numbering
|
||
|
IS 17998 : 2022 ISO 22404 : 2019 |
Plastics Determination of the Aerobic Biodegradation of Non-Floating Materials Exposed To Marine Sediment Method by Analysis of Evolved Carbon Dioxide
|
-
|
Identical under dual numbering
|
||
|
IS 17999 : 2022 ISO/TR 21960 : 2020 |
Plastics Environmental Aspects State of Knowledge and Methodologies
|
-
|
Identical under dual numbering
|
||
|
IS 18059 : 2022 ISO 10210 : 2012 |
PLASTICS METHODS FOR THE PREPARATION OF SAMPLES FOR BIODEGRADATION TESTING OF PLASTIC MATERIALS
|
-
|
Identical under dual numbering
|
||
|
IS 18060 : 2022 ISO 13975 : 2019 |
PLASTICS DETERMINATION OF THE ULTIMATE ANAEROBIC BIODEGRADATION OF PLASTIC MATERIALS IN CONTROLLED SLURRY DIGESTION SYSTEMS METHOD BY MEASUREMENT OF BIOGAS PRODUCTION
|
-
|
Identical under dual numbering
|
||
|
IS 18065 : 2022 ISO 17422 : 2018 |
PLASTICS ENVIRONMENTAL ASPECTS GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS
|
-
|
Identical under dual numbering
|
||
|
IS 19015 : 2022 ISO 22766 : 2020 |
Plastics Determination of the Degree of Disintegration of Plastic Materials in Marine Habitats under Real Field Conditions
|
-
|
Identical under dual numbering
|
||
|
IS 1998 : 1962 Reviewed In : 2023 |
Methods of test for thermosetting synthetic resin bonded laminated sheets
|
February, 2023
|
1
|
Indigenous
|
|
|
IS/ISO 20200 : 2015 ISO 20200 : 2015 Reviewed In : 2023 |
Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory - Scale test (First Revision)
|
May, 2023
|
-
|
Identical under single numbering
|
|
|
IS 2221 : 1962 Reviewed In : 2020 |
Methods of test for aminoplastic moulding materials
|
July, 2020
|
1
|
Indigenous
|
|
|
IS 2530 : 1963 Reviewed In : 2023 |
Methods of test for polyethylene moulding materials and polyethylene compounds
|
February, 2023
|
-
|
Indigenous
|
|
|
IS 4669 : 1968 Reviewed In : 2023 |
Methods of test for polyvinyl chloride resins
|
February, 2023
|
1
|
Indigenous
|
|
|
IS 7188 : 1974 Reviewed In : 2020 |
Methods of test for cellulose acetate flakes
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 7437 : 1974 Reviewed In : 2020 |
Methods of sampling and test for vegetable adhesives
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 8402 : 1987 Reviewed In : 2020 |
Methods of sampling and test for pressure sensitive adhesive tapes (First Revision)
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 8543 (Part 1/Sec 1) : 1978 Reviewed In : 2020 |
Methods of testing plastics: Part 1 characterization of polymer structure and size section 1 determination of molecular mass from viscosity
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 8543 (Part 13/Sec 1) : 1977 Reviewed In : 2020 |
Methods of testing plastics: Part 13 tests for specific products section 1 buttons (Thermosetting)
|
July, 2020
|
-
|
Indigenous
|
|
|
IS 867 : 1963 Reviewed In : 2023 |
Methods of test for phenolic moulding materials (Revised)
|
February, 2023
|
-
|
Indigenous
|
|
|
IS 9591 : 2023 |
PLASTICIZER ESTERS METHODS OF SAMPLING AND TESTS
|
-
|
Indigenous
|
||
|
IS 9845 : 1998 Reviewed In : 2020 |
Determination of overall migration of constituents of plastics materials and articles intended to come in contact with foodstuffs - Method of analysis (Second Revision)
|
July, 2020
|
-
|
Indigenous
|
| No Records Found |
| No Records Found |
PCD 27 (26737) Revision of: IS 867:1963 |
METHODS OF TEST PHENOLIC MOULDING MATERIALS Second Revision |
|
PCD 27 (26738) Revision of: IS 2221:1962 |
METHODS OF TEST AMINOPLASTIC MOULDING MATERIALS First Revision |
|
PCD 27 (26739) Revision of: IS 2530:1963 |
METHODS OF TEST POLYETHYLENE MOULDING MATERIALS AND COMPOUNDS First Revision |
|
PCD 27 (26740) Revision of: IS 4669:1968 |
METHODS OF TEST POLYVINYL CHLORIDE RESINS First Revision |
|
PCD 27 (24009)
Revision of: IS 13360:2001 |
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 14 DETERMINATION OF INDENTATION HARDNESS OF RIGID PLASTIC BY MEANS OF BARCOL IMPRESSER |
|
|
PCD 27 (24010)
Revision of: IS 13360:2001 |
PLASTICS METHODS OF TESTING PART 6 THERMAL PROPERTIES SECTION 9 DETERMINATION OF DENSITY OF SMOKE FROM THE BURNING OR DECOMPOSITION OF PLASTICS |
|
|
PCD 27 (24011)
Revision of: IS 13360:1992 |
PLASTICS METHODS OF TESTING PART 1 INTRODUCTION |
|
|
PCD 27 (25510)
|
PLASTICS METHODOLOGY FOR ASSESSING POLYMER PHOTOAGEING BY FTIR AND UVVISIBLE SPECTROSCOPY |
|
|
PCD 27 (25511)
|
MEASUREMENT OF ANTIVIRAL ACTIVITY ON PLASTICS AND OTHER NON-POROUS SURFACES |
|
|
PCD 27 (25512)
|
PLASTICS SMALL ENCLOSURES FOR CONDITIONING AND TESTING USING AQUEOUS SOLUTIONS TO MAINTAIN THE HUMIDITY AT A CONSTANT VALUE |
|
|
PCD 27 (25513)
|
PLASTICS METHODS FOR MARINE EXPOSURE |
|
|
PCD 27 (25514)
|
PLASTICS ASSESSMENT OF THE EFFECTIVENESS OF FUNGISTATIC COMPOUNDS IN PLASTICS FORMULATIONS |
|
|
PCD 27 (25515)
|
PLASTICS METHODS OF EXPOSURE TO DETERMINE THE WAVELENGTH DEPENDENT DEGRADATION USING SPECTRALLY DISPERSED RADIATION |
|
|
PCD 27 (25516)
|
MEASUREMENT OF ANTIBACTERIAL ACTIVITY ON PLASTICS AND OTHER NON-POROUS SURFACES |
|
|
PCD 27 (25517)
|
PLASTICS ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION |
|
|
PCD 27 (25518)
|
PLASTICS METHODS OF TESTING PART 8 PERFORMANCECHEMICAL PROPERTIES SECTION XX DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC GENERAL GUIDANCE |
|
|
PCD 27 (25520)
|
PLASTICS METHODS OF TESTING PART 8 PERFORMANCECHEMICAL PROPERTIES SECTION XX DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC BALL OR PIN IMPRESSION METHOD |
|
|
PCD 27 (25521)
|
PLASTICS METHODS OF TESTING PART 8 PERFORMANCECHEMICAL PROPERTIES SECTION XX DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC CONSTANT TENSILE DEFORMATION METHOD |
|
|
PCD 27 (25522)
|
PLASTICS METHODS OF TESTING PART 8 PERFORMANCECHEMICAL PROPERTIES SECTION XX DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING ESC SLOW STRAIN RATE METHOD |
|
|
PCD 27 (25745)
|
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 1 GENERAL PRINCIPLES |
|
|
PCD 27 (25746)
|
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 2 TORSION-PENDULUM METHOD |
|
|
PCD 27 (25747)
|
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 3 FLEXURAL VIBRATION RESONANCE-CURVE METHOD |
|
|
PCD 27 (25748)
|
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 4 TENSILE VIBRATION NON-RESONANCE METHOD |
|
|
PCD 27 (25749)
|
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 5 FLEXURAL VIBRATION NON-RESONANCE METHOD |
|
|
PCD 27 (25750)
|
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 6 SHEAR VIBRATION NON-RESONANCE METHOD |
|
|
PCD 27 (25751)
|
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 7 TORSIONAL VIBRATION NON-RESONANCE METHOD |
|
|
PCD 27 (25752)
|
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 8 LONGITUDINAL AND SHEAR VIBRATION WAVE-PROPAGATION METHOD |
|
|
PCD 27 (25753)
|
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 9 TENSILE VIBRATION SONIC-PULSE PROPAGATION METHOD |
|
|
PCD 27 (25754)
|
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 10 COMPLEX SHEAR VISCOSITY USING A PARALLEL-PLATE OSCILLATORY RHEOMETER |
|
|
PCD 27 (25755)
|
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 11 GLASS TRANSITION TEMPERATURE |
|
|
PCD 27 (25756)
|
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF DYNAMIC MECHANICAL PROPERTIES SUBSEC 12 COMPRESSIVE VIBRATION NON-RESONANCE METHOD |
PCD 27 (23184)
Revision of: IS 13360:2017 |
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 5 DETERMINATION OF CHARPY IMPACT PROPERTIES SUBSEC 1 NON-INSTRUMENTED IMPACT TEST Second Revision |
|
PCD 27 (23186)
Revision of: IS 13360:2017 |
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 5 DETERMINATION OF CHARPY IMPACT PROPERTIES SUBSEC 2 INSTRUMENTED IMPACT TEST Second Revision |
|
PCD 27 (23190)
Revision of: IS 13360:2018 |
Plastics Methods of Testing Part 4 Rheological Properties Section 1 Determination of the Melt Mass-Flow Rate MFR and the Melt Volume-Flow Rate MVR of Thermoplastics Subsection 1 Standard Method Third Revision |
|
PCD 27 (23191)
Revision of: IS 13360:2018 |
PLASTICS METHODS OF TESTING PART 11 SPECIAL PROPERTIES SECTION 9 DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS GENERAL PRINCIPLES Second Revision |
|
PCD 27 (24269)
Revision of: IS 13360:2018 |
PLASTICS METHODS OF TESTING PART 6 THERMAL PROPERTIES SECTION 1 DETERMINATION OF VICAT SOFTENING TEMPERATURE OF THERMOPLASTIC MATERIALS Third Revision |
|
PCD 27 (25101)
|
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION XX DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS SUBSECTION 1 NON-INSTRUMENTED IMPACT TESTING |
|
PCD 27 (25102)
|
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION XX DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS SUBSECTION 2 INSTRUMENTED IMPACT TESTING |
|
PCD 27 (25104)
|
PLASTICS METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES SECTION XX DETERMINATION OF LINEAR DIMENSIONS OF TEST SPECIMENS |
|
PCD 27 (25106)
|
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SECTION XX DETERMINATION OF TENSILE PROPERTIES AT HIGH STRAIN RATES |
|
PCD 27 (25107)
|
PLASTICS METHODS OF TESTING PART 5 MECHANICAL PROPERTIES SEC XX DETERMINATION OF SCRATCH PROPERTIES |
|
PCD 27 (23124)
Revision of: IS 13360:2001 |
PLASTICS METHODS OF TESTING PART 9 OPTICAL PROPERTIES SECTION 9 DETERMINATION OF YELLOW INDEX AND CHANGE IN YELLOWNESS INDEX First Revision | |
|
PCD 27 (23125)
Revision of: IS 11022:1984 |
METHODS OF SAMPLING AND TEST FOR GLUES BONE SKIN FLESHINGS AND FISH GLUES First Revision | |
|
PCD 27 (23126)
Revision of: IS 13360:1997 |
PLASTICS METHODS OF TESTING PART 8 PERMANENCE CHEMICAL PROPERTIES SECTION 6 FILM AND SHEETING DETERMINATION OF GAS-TRANSMISSION RATE SUBSEC 1 DIFFERENTIAL-PRESSURE METHODS First Revision | |
|
PCD 27 (23127)
Revision of: IS 13360:1997 |
PLASTICS METHODS OF TESTING PART 8 PERMANENCE CHEMICAL PROPERTIES SECTION 6 FILM AND SHEETING DETERMINATION OF GAS-TRANSMISSION RATE SUBSEC 2 EQUAL-PRESSURE METHOD First Revision | |
|
PCD 27 (23183)
Revision of: IS 13360:1995 |
PLASTICS METHODS OF TESTING PART 3 PHYSICAL AND DIMENSIONAL PROPERTIES SECTION 4 DETERMINATION OF BULK FACTOR OF MOULDING MATERIALS First Revision | |
|
PCD 27 (24270)
Revision of: IS 13360:2016 |
PLASTICS METHODS OF TESTING PART 2 SAMPLING AND PREPARATION OF TEST SPECIMENS SECTION 1 PLASTICS COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS Second Revision | |
|
PCD 27 (24271)
|
PRINCIPLES FOR THE ANALYSIS OF MICROPLASTICS PRESENT IN THE ENVIRONMENT | |
|
PCD 27 (25103)
|
PLASTICS VERIFICATION OF PENDULUM IMPACT-TESTING MACHINES CHARPY IZOD AND TENSILE IMPACT-TESTING | |
|
PCD 27 (25105)
|
PLASTICS QUANTITATIVE EVALUATION OF SCRATCH -INDUCED DAMAGE AND SCRATCH VISIBILITY |
|
|
IS 13360 (Part 3/Sec 1) : 1995 ISO 1183 Reviewed In : 2018 |
Plastics - Methods of Testing - Part 3 Physical and Dimensional Properties - Section 1 Determination of Density and Relative Density of Non-Cellular Plastics |
|
|
IS 13360 (Part 6/Sec 4) : 1997 ISO 1210 Reviewed In : 2013 |
Plastics - Methods of Testing Part 6 Thermal properties Sec 4 Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source |
|
|
IS 13360 (Part 6/Sec 5) : 2001 Reviewed In : 2016 |
Plastics - Methods of Testing - Part 6 Thermal Properties - Section 5 Determination of Flammability of Plastic Materials for Parts and Devices in Appliances |