BUREAU OF INDIAN STANDARDS
Programme of Work
PGD35 : Machine Tools, Machine Tool Elements, and Holding Devices
- Scope : Standardization in the field of machine tools, basic machine tool elements, jigs and fixtures, modular units, evaluation of all machine tools for the working of metal, wood and plastics.
-
Liaison :ISO/TC 39 - Machine tools - Participating (P)
ISO/TC 39/SC 10 - Safety - Participating (P)
ISO/TC 39/SC 2 - Test conditions for metal cutting machine tools - Participating (P)
ISO/TC 39/SC 4 - Woodworking machines - Observer (O)
ISO/TC 39/SC 6 - Noise of machine tools - Participating (P)
ISO/TC 39/SC 8 - Work holding spindles and chucks - Observer (O)
ISO/TC 184/SC 1 - Industrial cyber and physical device control - Participating (P)
|
IS 10188 : 1982 ISO 2934 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Dimensions for modular units for machine tool construction - Wing bases for columns
|
January, 2019
|
1
|
Identical under dual numbering
|
|
|
IS 10190 : 2018 ISO 1708 : 1989 Reviewed In : 2023 |
Acceptance conditions for general purpose parallel lathes - Testing of the accuracy (First Revision)
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 10352 : 2017 ISO 2407 : 1997 Reviewed In : 2022 |
Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy (Second Revision)
|
March, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 10573 : 1983 Reviewed In : 2022 |
Specification for oil sight glass for machine tools
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 10574 : 1983 Reviewed In : 2022 |
Specification for clamp buttons to be used with parallel sided clamp plates
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 10575 : 1983 ISO 3371 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Dimensions for modular units for machine tool construction - Rotary tables
|
January, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 10576 : 1983 ISO 2769 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Dimensions for modular units for machine tool construction - Wing bases for slide units
|
January, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 10602 : 1983 Reviewed In : 2022 |
Specification for floor plates
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 10612 : 1983 Reviewed In : 2022 |
Specification for 4 - Jaw independent lathe chucks
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 10882 : 1984 Reviewed In : 2022 |
Specification for cam levers
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 10941 : 1984 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Sizes for dovetail guideways for machine tools
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 10949 : 1984 Reviewed In : 2019 |
Code of practice for painting procedure for machine tools
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 11011 : 1984 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Glossary of terms relating to wood working machines
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 11016 : 1984 Reviewed In : 2019 |
General safety requirements for machine tools and their operation
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 11107 : 1984 ISO 3589 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Dimensions for modular units for machine tool construction - Columns
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 11133 : 1984 ISO 5169 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Recommendations for symbols for lubrications appearing on machine tools
|
January, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 11278 : 1985 Reviewed In : 2022 |
Specification for jig feet with cylindrical shank
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 11325 : 1985 Reviewed In : 2022 |
Specification for adjustable clamp support
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 11398 : 2018 ISO 6155 : 1998 |
Machine Tools — Test Conditions for Horizontal Spindle Turret and Single Spindle Automatic Lathes — Testing of the Accuracy ( First Revision )
|
-
|
Identical under dual numbering
|
||
|
IS 11613 : 1986 Reviewed In : 2022 |
Specification for renewable lock screw locating pins
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 11614 : 1986 Reviewed In : 2022 |
Specification for renewable threaded locating pins
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 11648 : 1986 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Nomenclature for modular machine tools
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 11831 : 1986 Reviewed In : 2022 |
Specification for jig foot bolts
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 11843 : 1986 Reviewed In : 2022 |
Specification for jig foot nuts
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 11846 : 1987 ISO 3476 Reviewed In : 2019 |
Dimensions for modular units for machine tool construction - Tenon drive and flanges for mounting multi - Spindle heads
|
January, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 11958 (Part 1) : 2018 ISO 3070-1 : 2007 Reviewed In : 2023 |
Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle: Part 1 machines with fixed column and movable table (First Revision)
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 11958 (Part 2) : 2019 ISO 3070-2 : 2016 Reviewed In : 2023 |
Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle: Part 2 machines with movable column as long the X - Axis (Floor Type) (First Revision)
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 11958 (Part 3) : 2022 3070-3 : 2007 |
Machine Tools Test Conditions for Testing the Accuracy of Boring and Milling Machines with Horizontal Spindle Part 3: Machines with Movable Column and Movable Table
|
-
|
Identical under dual numbering
|
||
|
IS 12106 : 1987 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Dimensions for modular units for machine tool construction - Spindle units
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 12242 : 1987 Reviewed In : 2022 |
Specification for door hinges for machine tools
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 12250 : 1987 Reviewed In : 2022 |
Specification for fixed clamp supports
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 12280 : 1988 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for tenon without counterbore
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 12281 : 1988 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Mounting dimensions of machine tool doors with hinges
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 12295 : 2000 ISO 3875 Reviewed In : 2018 |
Acceptance conditions for external cylindrical centreless grinding machines - Testing of the accuracy (First Revision)
|
September, 2018
|
-
|
Identical under dual numbering
|
|
|
IS 12296 : 1988 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Test chart for thread rolling machines with cylindrical dies
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 12582 : 1989 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Tommy screws with fixed bar Specification
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 12850 : 1987 ISO 3650 Reviewed In : 2023 |
Modular units for machine tool construction - Support brackets
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS/ISO 13041-1 : 2020 ISO 13041-1 : 2020 |
Test conditions for numerically controlled turning machines and turning centres Part 1 : Geometric tests for machines with horizontal work holding spindles
|
-
|
Identical under single numbering
|
||
|
IS/ISO 13041-2 : 2020 ISO 13041-2 : 2020 |
Test conditions for numerically controlled turning machines and turning centres Part 2 : Geometric tests for machines with a vertical work holding spindle
|
-
|
Identical under single numbering
|
||
|
IS/ISO 13041-3 : 2009 ISO 13041-3 : 2009 Reviewed In : 2022 |
Test conditions for numerically controlled turning machines and turning centres: Part 3 geometric tests for machines with inverted vertical workholding spindles
|
March, 2022
|
-
|
Identical under single numbering
|
|
|
IS/ISO 13041-4 : 2004 ISO 13041-4 : 2004 Reviewed In : 2022 |
Test conditions for numerically controlled turning machines and turning centres: Part 4 accuracy and repeatability of positioning of linear and rotary axes
|
March, 2022
|
-
|
Identical under dual numbering
|
|
|
IS/ISO 13041-5 : 2015 ISO 13041-5 : 2006 Reviewed In : 2017 |
Test conditions for numerically controlled turning machines and turning centers: Part 5 accuracy of speeds and interpolations (First Revision)
|
June, 2017
|
-
|
Identical under single numbering
|
|
|
IS/ISO 13041-6 : 2009 ISO 13041-6 : 2009 Reviewed In : 2022 |
Test conditions for numerically controlled turning machines and turning centres: Part 6 accuracy of a finished test piece
|
March, 2022
|
-
|
Identical under single numbering
|
|
|
IS/ISO 13041-7 : 2004 ISO 13041-7 : 2004 Reviewed In : 2022 |
Test conditions for numerically controlled turning machines and turning centres: Part 7 evaluation of contouring performance in the coordinate planes
|
March, 2022
|
-
|
Identical under single numbering
|
|
|
IS/ISO 13041-8 : 2004 ISO 13041-8 : 2004 Reviewed In : 2022 |
Test conditions for numerically controlled turning machines and turning centres: Part 8 evaluation of thermal distortions
|
March, 2022
|
-
|
Identical under single numbering
|
|
|
IS 13178 : 1991 Reviewed In : 2022 |
Clamping studs for machine tools - Specification
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 13543 : 1992 ISO 2891 Reviewed In : 2023 |
Modular units for machine tool construction - Centre bases and columns
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 13552 : 2019 ISO 1985 : 2015 Reviewed In : 2023 |
Machine tools - Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy (First Revision)
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 13635 : 1993 ISO 2972 Reviewed In : 2023 |
Numerical control of machines - Symbols
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 13934 : 2018 ISO 4703 : 2001 Reviewed In : 2023 |
Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy (First Revision)
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 14693 : 1999 Reviewed In : 2022 |
2 - Jaw and 3 - Jaw power operated wedge type chucks - Specification
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 14694 : 1999 Reviewed In : 2022 |
2-Jaw and 3-Jaw Power Operated High Speed Lathe Chucks With Through Bore - Specification
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 14725 : 1999 Reviewed In : 2022 |
2 - Jaw and 3 - Jaw hand operated heavy duty cam type self centering chucks - Specification
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 14872 (Part 1) : 2014 ISO 3408-1 : 2006 Reviewed In : 2019 |
Ball screws: Part 1 vocabulary and designation (First Revision)
|
December, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 14872 (Part 2) : 2024 ISO 3408-2: 2021 |
Ball Screws Part 2 Nominal Diameters, Leads, Nut Dimensions and Mounting Bolts — Metric Series (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 14872 (Part 3) : 2013 ISO 3408-3 : 2006 Reviewed In : 2023 |
Ball screws: Part 3 acceptance conditions and acceptance tests (First Revision)
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15246 : 2002 ISO 9524 Reviewed In : 2023 |
Machine tools - Front faces of spindle holders for machining centres - Functional dimensions
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15247 : 2002 ISO 9270 Reviewed In : 2019 |
7/24 tapers for tool shanks for automatic changing - Tapers for spindle noses
|
January, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 15248 (Part 1) : 2013 ISO 3442-1 : 2005 Reviewed In : 2023 |
Machine tools - Dimensions and geometric tests for self - Centring chucks with two - Piece jaws: Part 1 manually operated chucks with tongue and groove type jaws
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15248 (Part 2) : 2014 ISO 3442-2 : 2005 Reviewed In : 2019 |
Machine tools - Dimensions and geometric tests for self - Centring chucks with two - Piece jaws: Part 2 power - Operated chucks with tongue and groove type jaws
|
December, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 15248 (Part 3) : 2014 ISO 3442-3 : 2007 Reviewed In : 2019 |
Machine tools - Dimensions and geometric tests for self - Centring chucks with two - Piece jaws: Part 3 power - Operated chucks with serrated jaws
|
December, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 15250 (Part 1) : 2002 ISO 10791-1 Reviewed In : 2018 |
Test conditions for machining centres: Part 1 geometric tests for machines with horizontal spindle and with accessory heads (Horizontal Z - Axis)
|
September, 2018
|
-
|
Identical under dual numbering
|
|
|
IS 15250 (Part 1) : 2024 ISO 10791-1:2015 |
Test conditions for machining centres : Part 1 Geometric tests for machines with horizontal spindle (horizontal Z-axis)
|
-
|
Identical under dual numbering
|
||
|
IS 15250 (Part 2) : 2024 ISO 10791-2:2023 |
Test Conditions for Machining Centres Part 2 Geometric Tests for Machines with Vertical Spindle (Vertical Z-axis) (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 15250 (Part 3) : 2018 ISO 10791-3 : 1998 Reviewed In : 2023 |
Test conditions for machining centres: Part 3 geometric tests for machines with integral indexable or continuous universal heads (Vertical Z - Axis)
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15250 (Part 4) : 2018 ISO 10791-4 : 1998 Reviewed In : 2023 |
Test conditions for machining centres: Part 4 accuracy and repeatability of positioning of linear and rotary axes
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15250 (Part 5) : 2018 ISO 10791-5 : 1998 Reviewed In : 2023 |
Test conditions for machining centres: Part 5 accuracy and repeatability of positioning of work - Holding pallets
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15250 (Part 6) : 2018 ISO 10791-6 : 2014 Reviewed In : 2023 |
Test conditions for machining centres: Part 6 accuracy of speeds and interpolations
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15250 (Part 7) : 2023 ISO 10791-7 : 2020 |
Test conditions for machining centres Part 7 : Accuracy of finished test pieces
|
-
|
Identical under dual numbering
|
||
|
IS 15250 (Part 8) : 2018 ISO 10791-8 : 2001 Reviewed In : 2023 |
Test conditions for machining centres: Part 8 evaluation of contouring performance in the three coordinate planes
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15250 (Part 9) : 2018 ISO 10791-9 : 2001 Reviewed In : 2023 |
Test conditions for machining centres: Part 9 evaluation on the operating times of tool change and pallet change
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15250 (Part 10) : 2024 ISO 10791-10:2022 |
Test Conditions for Machining Centres Part 10 Evaluation of Thermal Distortions (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 15649 : 2006 Reviewed In : 2023 |
Machine tools chip bins for chip conveyor - Specification
|
May, 2023
|
-
|
Indigenous
|
|
|
IS/ISO 1701-1 : 2004 ISO 1701-1 : 2004 Reviewed In : 2021 |
Test conditions for milling machines with table of variable height - Testing of the accuracy: Part 1 machines with horizontal spindle
|
March, 2021
|
-
|
Identical under single numbering
|
|
|
IS/ISO 1701-17012 : 2004 ISO 1701-2 : 2004 Reviewed In : 2019 |
Test Conditions for Milling Machines with Table of Variable Height - Testing of Accuracy Part 2 Machines with Vertical Spindle
|
December, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 17246 : 2019 ISO 3190 : 1975 Reviewed In : 2023 |
Test Conditions for Turret and Single Spindle Co-ordinate Drilling Machines with Vertical Spindle — Testing of the Accuracy
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17247 (Part 1) : 2019 ISO 3686-1 : 2000 Reviewed In : 2023 |
Test Conditions for High Accuracy Turret and Single Spindle Coordinate Drilling and Boring Machines with Table of Fixed Height with Vertical Spindle — Testing of the Accuracy Part 1 Single Column Type Machines
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17247 (Part 2) : 2019 ISO 3686-2 : 2000 Reviewed In : 2023 |
Test Conditions for High Accuracy Turret and Single Spindle Coordinate Drilling and Boring Machines with Table of Fixed Height with Vertical Spindle — Testing of the Accuracy Part 2 Portal Type Machines with Moving Table
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17248 : 2019 ISO 8956 : 1986 Reviewed In : 2023 |
Acceptance Conditions for Copying Attachments, Integral or Otherwise, for Lathes — Testing of the Accuracy
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17249 (Part 1) : 2019 ISO 11090-1 : 2014 Reviewed In : 2023 |
Test Conditions for Die Sinking Electro-Discharge Machine ( Die Sinking EDM ) — Testing of the Accuracy Part 1 Single-Column Machines ( Cross-slide Table Type and Fixed-Table Type )
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17249 (Part 2) : 2021 ISO 11090-2 : 2014 |
Test conditions for die sinking electro-discharge machines die sinking EDM -- Testing of the accuracy -- Part 2: Double-column machines slide-head type Adoption of ISO 11090-2:2014 ICS 2512040
|
-
|
Identical under dual numbering
|
||
|
IS 17250 : 2019 ISO 14137 : 2015 Reviewed In : 2023 |
Test Conditions for Wire Electrical- Discharge Machines ( Wire EDM ) — Testing of the Accuracy
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17251 (Part 1) : 2019 ISO 14955-1 : 2017 Reviewed In : 2023 |
Machine Tools — Environmental Evaluation of Machine Tools Part 1 Design Methodology for Energy-Efficient Machine Tools
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17251 (Part 2) : 2019 ISO 14955-2 : 2017 Reviewed In : 2023 |
Machine Tools - Environmental Evaluation of Machine Tools Part 2 Methods for Measuring Energy Supplied to Machine Tools and Machine Tool Components
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17252 (Part 1) : 2019 ISO 15616-1 : 2003 Reviewed In : 2023 |
Acceptance Tests for CO2-laser Beam Machines for High Quality Welding and Cutting Part 1 General Principles, Acceptance Conditions
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17252 (Part 2) : 2019 ISO 15161-2 : 2003 Reviewed In : 2023 |
Acceptance Tests for CO2-laser Beam Machines for High Quality Welding and Cutting Part 2 Measurement of Static and Dynamic Accuracy
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17252 (Part 3) : 2020 ISO 15616-3 : 2003 |
Acceptance Tests for CO2-laser Beam Machines for High Quality Welding and Cutting Part 3 Calibration of Instruments for Measurement of Gas Flow and Pressure
|
-
|
Identical under dual numbering
|
||
|
IS 17252 (Part 4) : 2020 15616-4 : 2008 |
Acceptance Tests for CO2-laser Beam Machines for High Quality Welding and Cutting Part 4 Machines with 2-D Moving Optics
|
-
|
Identical under dual numbering
|
||
|
IS 17253 (Part 1) : 2019 ISO 16090-1 : 2017 |
Machine Tools Safety — Machining Centres, Milling Machines, Transfer Machines Part 1 Safety Requirements
|
-
|
Identical under dual numbering
|
||
|
IS 17253 (Part 1) : 2024 ISO 16090-1:2022 |
Machine Tools Safety Machining Centres Milling Machines Transfer Machines : Part 1 Safety Requirements
|
-
|
Identical under dual numbering
|
||
|
IS 17254 : 2019 ISO 16093 : 2017 Reviewed In : 2023 |
Machine Tools — Safety — Sawing Machines for Cold Metal
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17255 : 2019 ISO/TR 16907 : 2015 Reviewed In : 2023 |
Machine Tools — Numerical Compensation of Geometric Errors
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17256 (Part 1) : 2019 ISO/TR 17243-1 : 2014 Reviewed In : 2023 |
Machine Tool Spindles — Evaluation of Machine Tool Spindle Vibrations by Measurements on Spindle Housing Part 1 Spindles with Rolling Element Bearings and Integral Drives Operating at Speeds Between 600 min-1 and 30 000 min-1
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17256 (Part 2) : 2019 ISO/TR 17243-2 : 2017 Reviewed In : 2023 |
Machine Tool Spindles — Evaluation of Spindle Vibrations by Measurements on non-rotating parts Part 2 Direct-Driven Spindles and Belt-Driven Spindles with Rolling Element Bearings Operating at Speeds Between 600 r / min and 30 000 r / min
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17257 : 2024 ISO 26303:2022 |
Machine Tools — Short-Term Capability Evaluation of Machining Processes on Metal-Cutting Machine Tools (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 17258 : 2019 ISO 23125 : 2015 Reviewed In : 2023 |
Machine Tools — Safety — Turning Machines
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17259 : 2020 ISO 28881 : 2013 |
Machine Tools — Safety — Electro-Discharge Machines
|
-
|
Identical under dual numbering
|
||
|
IS 17393 : 2021 ISO 9013 : 2017 |
Thermal cutting -- Classification of thermal cuts -- Geometrical product specification and quality tolerances Adoption of ISO 9013:2017 ICS 2516010
|
-
|
Identical under dual numbering
|
||
|
IS 17925 : 2022 ISO 2772 : 2019 |
Test Conditions for Box Type Vertical Drilling Machines Testing of the Accuracy
|
-
|
Identical under dual numbering
|
||
|
IS 18057 (Part 1) : 2023 ISO 19085-1 : 2017 |
Woodworking machines Safety Part 1: Common requirements
|
-
|
Identical under dual numbering
|
||
|
IS 18057 (Part 2) : 2023 ISO 19085-2 : 2017 |
Woodworking machines Safety Part 2: Horizontal beam panel circular sawing Machines
|
-
|
Identical under dual numbering
|
||
|
IS 18057 (Part 3) : 2023 ISO 19085-3 : 2017 |
Woodworking Machines Safety Part 3: Numerically Controlled NC Boring and Routing Machines
|
-
|
Identical under dual numbering
|
||
|
IS 18057 (Part 4) : 2023 ISO 19085-4 : 2018 |
Woodworking Machines Safety Part 4: Vertical Panel Circular Sawing Machines
|
-
|
Identical under dual numbering
|
||
|
IS 18057 (Part 5) : 2023 ISO 19085-5 : 2017 |
Woodworking Machines Safety Part 5: Dimension Saws
|
-
|
Identical under dual numbering
|
||
|
IS 18057 (Part 6) : 2023 ISO 19085-6 : 2017 |
Woodworking Machines Safety Part 6: Single Spindle Vertical Moulding Machines Toupies
|
-
|
Identical under dual numbering
|
||
|
IS 18057 (Part 7) : 2023 ISO 19085-7 : 2019 |
Woodworking Machines Safety Part 7: Surface Planing Thickness Planing Combined SurfaceThickness Planing Machines
|
-
|
Identical under dual numbering
|
||
|
IS 18057 (Part 8) : 2023 ISO 19085-8 : 2017 |
Woodworking machines Safety Part 8: Belt sanding and calibrating machines for straight workpieces
|
-
|
Identical under dual numbering
|
||
|
IS 18057 (Part 9) : 2023 ISO 19085-9 : 2019 |
Woodworking machines Safety Part 9: Circular Saw Benches with and without sliding table
|
-
|
Identical under dual numbering
|
||
|
IS 18057 (Part 10) : 2023 ISO 19085-10 : 2018 |
Woodworking Machines Safety Part 10: Building Site Saws Contractor Saws
|
-
|
Identical under dual numbering
|
||
|
IS 18165 : 2023 ISO 17916 : 2016 |
Safety of thermal cutting machines
|
-
|
Identical under dual numbering
|
||
|
IS 18318 : 2023 ISO 239: 1999 |
DRILL CHUCK TAPERS
|
-
|
Identical under dual numbering
|
||
|
IS 1878 (Part 1) : 1993 ISO 1708 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Test chart for general purpose parallel lathes: Part 1 lathes with swing over bed up to 800 mm (Second Revision)
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 1878 (Part 2) : 1992 ISO 1708 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Test chart for general purpose parallel lathes: Part 2 lathes with swing over bed over 800 mm and up to 1600 mm (Second Revision)
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 1878 (Part 3) : 1998 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Test chart for general purpose parallel lathes: Part 3 lathes with swing over bed over 1800 mm and up to 2500 mm
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 19001 : 2023 ISO 18217 : 2015 |
Safety of Woodworking Machines Edge-Banding Machines Fed by Chains
|
-
|
Identical under dual numbering
|
||
|
IS 19002 : 2023 ISO 6481 : 2019 |
Test Conditions for Vertical Surface Type Broaching Machines Testing of Accuracy
|
-
|
Identical under dual numbering
|
||
|
IS/ISO 1984-1 : 2001 ISO 1984-1 Reviewed In : 2022 |
Test conditions for manually controlled milling machines with table of fixed height- Testing of the accuracy – Part 1: Machines with horizontal spindle (Adoption of ISO 1984-1:2001) (Superseding IS 13640:1993)
|
-
|
Identical under dual numbering
|
||
|
IS/ISO 1984-2 : 2011 ISO 1984-2 : 2001 Reviewed In : 2022 |
Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy: Part 2 machines with vertical spindle
|
March, 2022
|
-
|
Identical under single numbering
|
|
|
IS 2013 : 1995 Reviewed In : 2022 |
T - Slots - Dimensions and spacings (Third Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 2014 : 1996 Reviewed In : 2022 |
T - Bolts - Specification (Second Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 2015 : 1977 Reviewed In : 2022 |
Specification for t - Nuts (First Revision)
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 2063 (Part 1) : 2016 ISO 230-1 : 2012 Reviewed In : 2022 |
Test code for machine tools: Part 1 geometric accuracy of machines operating under No - Load or quasi - Static conditions (Third Revision)
|
March, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 2063 (Part 2) : 2016 ISO 230-2 Reviewed In : 2021 |
Test code for machine tools: Part 2 determination of accuracy and repeatability of positioning of numerically controlled axes (First Revision)
|
March, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 2063 (Part 3) : 2023 ISO 230-3 : 2020 |
Test code for machine tools Part 3 : Determination of thermal effects
|
-
|
Identical under dual numbering
|
||
|
IS 2063 (Part 4) : 2023 ISO 230-4 : 2022 |
Test code for machine tools Part 4 : Circular tests for numerically controlled machine tools
|
-
|
Identical under dual numbering
|
||
|
IS 2063 (Part 5) : 2016 ISO 230-5 : 2000 Reviewed In : 2021 |
Test code for machine tools: Part 5 determination of the noise emission
|
March, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 2063 (Part 6) : 2016 ISO 230-6 : 2002 Reviewed In : 2021 |
Test code for machine tools: Part 6 determination of positioning accuracy on body and face diagonals (Diagonal Displacement Tests)
|
March, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 2063 (Part 7) : 2023 ISO 230-7 : 2015 |
Test code for machine tools Part 7 : Geometric accuracy of axes of rotation
|
-
|
Identical under dual numbering
|
||
|
IS 2063 (Part 8) : 2016 ISO /TR 230-8 : 2010 Reviewed In : 2021 |
Test code for machine tools: Part 8 vibrations
|
March, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 2063 (Part 9) : 2016 ISO/TR 230-9 : 2005 Reviewed In : 2021 |
Test code for machine tools: Part 9 estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
|
March, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 2063 (Part 10) : 2023 ISO 230-10 : 2016 |
Test Code for Machine Tools Part 10: Determination of the Measuring Performance of Probing Systems of Numerically Controlled Machine Tools
|
-
|
Identical under dual numbering
|
||
|
IS 2063 (Part 12) : 2024 ISO 230-12:2022 |
Machine Tools - Test Code: Part 12 Accuracy of Finished Test Pieces
|
-
|
Identical under dual numbering
|
||
|
IS 2161 : 1996 Reviewed In : 2022 |
Coolant pumps for general purpose machine tools - Specification (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 2182 : 2018 ISO 369 : 2009 Reviewed In : 2023 |
Machine tools - Symbols for indications appearing on machine tools (Second Revision)
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 2199 : 1989 Reviewed In : 2019 |
Radial drilling machines - Test chart (First Revision)
|
January, 2019
|
-
|
Modified/Technically Equivalent
|
|
|
IS 2218 : 1999 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Speeds and feeds for machine tools (First Revision)
|
September, 2018
|
-
|
Identical under dual numbering
|
|
|
IS 2219 : 1962 Reviewed In : 2021 |
Feeds for machine tools
|
March, 2021
|
1
|
Indigenous
|
|
|
IS 2243 : 1971 Reviewed In : 2022 |
Specification for drill chucks (First Revision)
|
March, 2022
|
3
|
Indigenous
|
|
|
IS 2289 : 1976 Reviewed In : 2022 |
Specification for 60° dead centres for lathes (First Revision)
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 2367 : 1981 Reviewed In : 2019 |
Test chart for box type vertical drilling machines (First Revision)
|
January, 2019
|
-
|
Not Equivalent
|
|
|
IS 2368 : 2018 Reviewed In : 2023 |
Machine tools - Test conditions for external cylindrical and universal grinding machines with a movable table - Testing of the accuracy (Third Revision)
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 2425 : 1982 ISO 2773/1 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Test chart for pillar type vertical drilling machines (First Revision)
|
January, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 2426 : 1985 ISO 2773/1 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Test chart for bench drilling machines (First revision)
|
January, 2019
|
1
|
Indigenous
|
|
|
IS 2534 : 1999 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Carbide tipped dead centres - Specification (First Revision)
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 2582 (Part 1) : 2015 ISO 702-1 : 2009 Reviewed In : 2021 |
Machine tools - Connecting dimensions of spindle noses and work holding chucks: Part 1 conical connection (Third Revision)
|
March, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 2582 (Part 2) : 2016 ISO 702-2 : 2007 Reviewed In : 2021 |
Machine tools - Connecting dimensions of spindle noses and work holding chucks: Part 2 camlock type (Third Revision)
|
March, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 2582 (Part 3) : 2023 ISO 702-3 : 2007 |
Machine tools Connecting dimensions of spindle noses and work holding chucks Part 3 : Bayonet type
|
-
|
Identical under dual numbering
|
||
|
IS 2582 (Part 4) : 2016 ISO 702-4 : 2004 Reviewed In : 2021 |
Machine tools - Connecting dimensions of spindle noses and work holding chucks: Part 4 cylindrical connection
|
March, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 2743 (Part 1) : 2019 ISO 1986-1 : 2014 Reviewed In : 2023 |
Test Conditions for Surface Grinding Machines with Horizontal Grinding Wheel Spindle and Reciprocating Table — Testing of the Accuracy Part 1 Machines with Table Length of up to 1 600 mm ( Third Revision )
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 2804 : 1998 Reviewed In : 2019 |
Palm grips - Specification (First Revision)
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 2805 : 1964 Reviewed In : 2022 |
Dimensions for ball grips
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 2876 : 2021 |
3-Jaw and 4-Jaw Scroll Manually Operated Self-Centering Lathe Chucks (Third Revision)
|
-
|
Indigenous
|
||
|
IS 2877 : 1986 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Test chart for single and double column planing machines (Second Revision)
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 2890 : 1983 Reviewed In : 2022 |
Specification for taper handles for machine tools (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 2909 : 1998 Reviewed In : 2019 |
Star grips - Specification (First Revision)
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 2987 : 1992 ISO 447 Reviewed In : 2023 |
Direction of operation of controls for machine tools - Recommendations (Second Revision)
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 2990 : 1986 Reviewed In : 2022 |
Specification for tenons (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 2995 : 1988 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for set collars (First Revision)
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 3048 : 1965 Reviewed In : 2022 |
Dimensions for handwheels
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 3075 (Part 1) : 1986 Reviewed In : 2022 |
Specification for circlips: Part 1 for shafts (First Revision)
|
March, 2022
|
2
|
Indigenous
|
|
|
IS 3075 (Part 2) : 1986 Reviewed In : 2022 |
Specification for circlips: Part 2 for bores (First Revision)
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 3075 (Part 3) : 1986 Reviewed In : 2022 |
Specification for circlips: Part 3 type e for shafts (First Revision)
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 3080 : 1965 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Test chart for universal tool and cutter grinders
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 3691 : 1990 ISO 7007 Reviewed In : 2019 |
Woodworking machines - Table bandsawing machines - Nomenclature and acceptance conditions (Second Revision)
|
January, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 3694 : 1991 ISO 7987:85 Reviewed In : 2019 |
Test chart for woodworking turning lathes (Second Revision)
|
January, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 3793 : 1966 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for live centres
|
January, 2019
|
1
|
Indigenous
|
|
|
IS 4291 : 1996 Reviewed In : 2022 |
C - Washers - Specification (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 4294 : 2018 Reviewed In : 2023 |
Jig buttons - Specification (Second Revision)
|
May, 2023
|
-
|
Indigenous
|
|
|
IS 4295 : 1983 Reviewed In : 2022 |
Specification for locking dogs (Catches) with springs (First Revision)
|
March, 2022
|
2
|
Indigenous
|
|
|
IS 4297 : 1996 Reviewed In : 2022 |
Spherical washers and conical seats - Specification (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 4298 : 2009 Reviewed In : 2021 |
Swing C- Washers - Specification (Second Revision)
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 4299 : 1982 Reviewed In : 2022 |
Specification for jig feet (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 4502 : 1999 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Machine vices - Specification (First Revision)
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 4816 : 1987 Reviewed In : 2022 |
Specification for permanent - Magnetic chucks (Second Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 5093 : 1996 Reviewed In : 2022 |
Locating pins (Round) - Specification (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 5094 : 1969 Reviewed In : 2022 |
Dimensions for diamond locating pins
|
March, 2022
|
-
|
Indigenous
|
|
|
IS/ISO 5170 : 1977 Reviewed In : 2023 |
Machine tools - Lubrication systems
|
May, 2023
|
-
|
Identical under single numbering
|
|
|
IS 6040 : 1993 ISO 1708 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Test chart for precision lathes - Lathes with swing over bed up to 500 mm and distance between centres up to 1500 mm (First Revision)
|
January, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 6080 : 1985 Reviewed In : 2022 |
Specification for double ended clamps (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 6081 : 1985 Reviewed In : 2022 |
Specification for plain clamps (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 6082 : 1985 Reviewed In : 2022 |
Specification for slotted clamps (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 6090 : 1984 Reviewed In : 2022 |
Specification for cam operated clamps (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 6105 : 1971 Reviewed In : 2022 |
Specification for feed fingers
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 6197 : 2019 Reviewed In : 2023 |
Test chart for vertical boring and turning mills with table diameter up to 1600 mm (First Revision)
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 6238 : 1971 Reviewed In : 2022 |
Specification for spring collets
|
March, 2022
|
2
|
Indigenous
|
|
|
IS 6335 : 1971 Reviewed In : 2022 |
Specification for knurled thumb nuts (Fixtures)
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 6336 : 1989 Reviewed In : 2021 |
Screws for thrust pads (Fixtures) - Specification (First Revision)
|
March, 2021
|
-
|
Indigenous
|
|
|
IS 6337 : 1989 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Thrust - Pads (Fixtures) - Specification (First Revision)
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 6338 : 1989 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Clamping screws (Fixtures) - Specification (First Revision)
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 6440 : 1997 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Quick action drilling jigs - Specification (First Revision)
|
January, 2019
|
-
|
Indigenous
|
|
|
IS/ISO 6480 : 1983 ISO 6480 : 1983 Reviewed In : 2019 |
Conditions of acceptance for horizontal internal broaching machines - Testing of the accuracy
|
January, 2019
|
-
|
Identical under single numbering
|
|
|
IS 666 (Part 1) : 1972 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Specification for jig bushes: Part 1 headed and headless jig bushes (Second Revision)
|
September, 2018
|
1
|
Indigenous
|
|
|
IS 666 (Part 2) : 1972 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Specification for jig bushes: Part 2 renewable drill bushes (Second Revision)
|
September, 2018
|
2
|
Indigenous
|
|
|
IS 6679 : 1972 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Test chart for general purpose gear shaping machines (Table Diameter Up To 1000 Mm)
|
January, 2019
|
1
|
Indigenous
|
|
|
IS/ISO 6779 : 2019 ISO 6779 : 2019 |
Test Conditions for Vertical Internal Type Broaching Machines Testing of Accuracy First Revision
|
-
|
Identical under single numbering
|
||
|
IS 7228 : 1983 ISO 7006 Reviewed In : 2019 |
Recommended spindle diam - Eters for woodworking machines with rotating bored tools (First Revision)
|
January, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 7249 : 1993 ISO 7568 Reviewed In : 2019 |
Woodworking machines - Thickness planing machines with rotary cutterblock of one - Side dressing - Nomenclature and acceptance conditions (First Revision)
|
January, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 7258 : 1990 ISO 7009-1983 Reviewed In : 2019 |
Woodworking machines - Shingle spindle moulding machines - Nomenclature and acceptance conditions (First Revision)
|
January, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 7262 : 1996 Reviewed In : 2022 |
Turning mandrels - Specification (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 7266 : 1991 ISO 7946 Reviewed In : 2019 |
Test chart for woodworking slot mortising machines (First Revision)
|
January, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 7267 : 1991 ISO 7571-1985 Reviewed In : 2019 |
Test chart for woodworking surface planing machines with cutterblock for one - Side dressing (First Revision)
|
January, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 7279 : 1992 ISO 7945-1985 Reviewed In : 2019 |
Test chart for woodwork - ing single spindle boring machines (First Revision)
|
January, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 7286 : 1991 ISO 7950 Reviewed In : 2019 |
Test chart for woodworking single chain mortising machines (First Revision)
|
January, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 7289 : 1992 ISO 7569 Reviewed In : 2019 |
Test chart for woodworking planing machines for two, three or four - Side dressing (First Revision)
|
January, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 7294 : 1990 ISO 7008 Reviewed In : 2019 |
Woodworking machines - Single blade circular saw benches with or without travelling table - Nomenclature and acceptance conditions First Revision
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 7296 : 1992 ISO 7570 Reviewed In : 2019 |
Test chart for woodworking surface planing and thicknessing machines (First Revision)
|
January, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 7301 : 1974 Reviewed In : 2021 |
Specification for grinding mandrels
|
March, 2021
|
2
|
Indigenous
|
|
|
IS 7824 : 1995 Reviewed In : 2022 |
Quick change drill chucks, collets and floating reamer holders Specification (First Revision)
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 8107 : 1993 ISO 7948 Reviewed In : 2019 |
Woodworking machines - Routing machines - Nomenclature and acceptance conditions (First Revision)
|
January, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 8165 : 2010 Reviewed In : 2023 |
Acceptance conditions of mechanical dividing heads for machine tools - Testing of accuracy (First Revision)
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 8407 : 2010 Reviewed In : 2023 |
Acceptance conditions for gear hobbing machines - Testing of the accuracy (First Revision)
|
May, 2023
|
-
|
Indigenous
|
|
|
IS/ISO 8525 : 2008 ISO 8525 : 2008 |
Airborne noise emitted by machine tools - Operating conditions for metal - Cutting machines
|
-
|
Identical under single numbering
|
||
|
IS/ISO 8636-1 : 2000 ISO 8636-1 :2000 Reviewed In : 2023 |
Machine tools - Test conditions for bridge - Type milling machines - Testing of the accuracy: Part 1 fixed bridge (Portal - Type) machines (First Revision)
|
May, 2023
|
-
|
Identical under single numbering
|
|
|
IS/ISO 8636-2 : 2007 ISO 8636-2 : 2007 |
Machine Tools — Test Conditions for Bridge-Type Milling Machines — Testing of the Accuracy Part 2 Travelling Bridge (Gantry-Type) Machines
|
-
|
Identical under dual numbering
|
||
|
IS 8710 : 1978 Reviewed In : 2022 |
Specification for electromagnetic chucks
|
March, 2022
|
1
|
Indigenous
|
|
|
IS 8964 : 1999 Reviewed In : 2019 |
Safety conditions for woodworking machines - Recommendations (First Revision)
|
January, 2019
|
-
|
Indigenous
|
|
|
IS 9094 (Part 1) : 1979 Reviewed In : 2022 |
Specification for drill chuck taper arbors: Part 1 having taper shanks
|
March, 2022
|
-
|
Indigenous
|
|
|
IS 9474 : 1980 Reviewed In : 2019 |
Specification for principles of mechanical guarding of machinery
|
January, 2019
|
1
|
Indigenous
|
|
|
IS 9722 : 1981 ISO 2562 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Dimensions for modular units for machine tool construction - Slide units
|
January, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 9723 : 1981 ISO 2912 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Dimensions for modular units for machine tool construction - Multi - Spindle heads - Casing and input drive shaft dimensions
|
January, 2019
|
-
|
Identical under dual numbering
|
|
|
IS 9737 : 1981 ISO 2727 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Dimensions for modular units for machine tool construction - Headstocks
|
January, 2019
|
-
|
Identical under dual numbering
|
|
PGD 35 (24975)
Revision of: IS 6336:1989 |
Screws for Thrust Pads Fixtures Specification |
| No Records Found |
| No Records Found |
| No Records Found | ||
PGD 35 (25352)
Revision of: IS/ISO 6480:1983 |
Test conditions for horizontal internal type broaching machines Testing of accuracy |
| No Records Found |
|
|
IS 10988 : 1984 Reviewed In : 2010 |
Method of measuring noise from machine tools excluding testing in anechoic chambers |
|
|
IS 11118 : 1997 Reviewed In : 2013 |
Guidelines for technical evaluation of general purpose parallel lathes |
|
|
IS 11398 (Part 1) : 1985 ISO 6155-1 Reviewed In : 2013 |
Test chart for horizontal spindle capstan turret and single spindle automatic lathes Part 1 Machinable bar diameters greater than 25 mm |
|
|
IS 11398 (Part 2) : 1992 ISO 6155-2 Reviewed In : 2013 |
Test charts for horizontal spindle capstain turret and single spindle automatic lathes Part 2 Machinable bar dia 25 mm or less and chuck dia upto 160 mm |
|
|
IS 12454 : 1988 |
Guidelines for Technical Evaluation of General Purpose Parallel Lathes with Swing over Bed above 800 mm |
|
|
IS 12525 : 1989 Reviewed In : 2010 |
Snap Rings |
|
|
IS 13634 : 1993 ISO 1701-0 Reviewed In : 2013 |
General introduction for milling machines with table of variable height with horizontal or vertical spindle |
|
|
IS 13640 : 1993 ISO 1984-0 Reviewed In : 2013 |
General introduction for milling machines with table of fixed height with horizontal or vertical spindle |
|
|
IS 13993 : 1994 ISO 1701 Reviewed In : 2010 |
Test chart for universal milling machine with a swivelling table |
|
|
IS 15248 : 2002 ISO 3442 Reviewed In : 2013 |
Self-Centring Chucks for Machine Tools with Two-Piece Jaws Tongue and Groove Type - Sizes for Interchangeability and Acceptance Test Specifications |
|
|
IS 15249 : 2002 ISO 9401 Reviewed In : 2019 |
Machine tools - Jaw mountings on power chucks |
|
|
IS 1995 : 1984 ISO 213 Reviewed In : 2011 |
Overall internal heights for lathe tool posts |
|
|
IS 2063 : 1988 Reviewed In : 1998 |
Acceptance code for machine tools - Geometric accuracy of machines operating under no-load or finishing conditions |
|
|
IS 2200 : 1994 Reviewed In : 1999 |
Test chart for milling machines with table of variable height with horizontal spindle Third Revision |
|
|
IS 2200 (Part 2) : 2002 ISO 1701-2 Reviewed In : 2013 |
Test Conditions for Milling Machines with Table of Variable Height - Testing of Accuracy - Part 2 Machines with Horizontal Spindle |
|
|
IS 2200 (Part 3) : 2002 ISO 1701-3 Reviewed In : 2013 |
Test Conditions for Milling Machines with Table of Variable Height - Testing of Accuracy - Part 3 Machines with Vertical Spindle |
|
|
IS 2201 : 1994 ISO 1701 Reviewed In : 1999 |
Test Chart for Milling Machines with Table of Variable Height with Vertical Spindle |
|
|
IS 2308 : 1989 Reviewed In : 2010 |
Test Chart For Slotting Machines |
|
|
IS 2310 : 1989 Reviewed In : 2010 |
Test chart for shaping machines |
|
|
IS 2392 : 1963 |
Sizes for General Purpose Lathes |
|
|
IS 2538 : 1963 Reviewed In : 2013 |
Test chart for bench grinders |
|
|
IS 2583 : 1963 |
Dimensions for Camlock Type Spindle Nose and Back Plates |
|
|
IS 2743 : 1992 ISO 1986 Reviewed In : 2019 |
Test chart for surface grinding machines with horizontal grinding wheel spindle and reciprocating table Second Revision |
|
|
IS 2793 : 1964 |
Dimensions of Cranked Handles |
|
|
IS 2904 : 1998 Reviewed In : 2013 |
Ball handles |
|
|
IS 2908 : 1998 Reviewed In : 2013 |
Hand cranks |
|
|
IS 2975 : 1998 Reviewed In : 2013 |
Control levers with ball grip |
|
|
IS 2996 : 1986 ISO 666 Reviewed In : 2011 |
Mounting dimensions of plain grinding wheels by means of hub flanges |
|
|
IS 3405 : 1966 Reviewed In : 2013 |
Test chart for power hacksaw machines up to 300 mm round bar capacity |
|
|
IS 4279 : 1984 Reviewed In : 2011 |
Goose Neck Clamps |
|
|
IS 4292 : 1984 Reviewed In : 2011 |
Strap Clamps |
|
|
IS 4293 : 1984 Reviewed In : 2011 |
U-type Clamps |
|
|
IS 4537 : 1968 |
Test Chart for Capstan and Turret lathes |
|
|
IS 4872 : 1968 |
Sizes for Planning Machines |
|
|
IS 5091 : 1969 Reviewed In : 2011 |
Dimensions For Circular Base Plates |
|
|
IS 5092 : 1969 Reviewed In : 2011 |
Dimensions for square and rectangular base plates |
|
|
IS 5095 : 1998 Reviewed In : 2013 |
End locating plugs |
|
|
IS 5096 : 1969 Reviewed In : 2011 |
Dimensions for round locating studs |
|
|
IS 5097 : 1969 Reviewed In : 2011 |
Dimensions for diamond locating studs |
|
|
IS 519 : 1954 |
T-bolts and T-nuts |
|
|
IS 5250 : 1984 Reviewed In : 2011 |
Swing Clamps |
|
|
IS 5251 : 1984 Reviewed In : 2011 |
Table Clamps |
|
|
IS 5252 : 1984 Reviewed In : 2011 |
Dimensions for Wide Clamp Plates |
|
|
IS 5990 : 1971 |
Sizes for Shaping Machines |
|
|
IS 5998 : 1984 Reviewed In : 2011 |
Parallel Sided Clamp Plates |
|
|
IS 5999 : 1999 Reviewed In : 2011 |
Swing Latches |
|
|
IS 6893 (Part 1) : 1988 Reviewed In : 2019 |
Proforma for purchase Specification for machine tools Part 1 general purpose parallel lathes and precision lathes First Revision |
|
|
IS 6893 (Part 2) : 1987 Reviewed In : 2019 |
Proforma for purchase Specification for machine tools Part 2 horizontal universal knee - Type milling machines First Revision |
|
|
IS 6893 (Part 3) : 1988 Reviewed In : 2019 |
Proforma for purchase Specification for machine tools Part 3 radial drilling machines First Revision |
|
|
IS 6893 (Part 4) : 1987 Reviewed In : 2019 |
Proforma for purchase Specification for machine tools Part 4 vertical turning and boring lathes First Revision |
|
|
IS 6893 (Part 5) : 1987 Reviewed In : 2019 |
Proforma for purchase Specification for machine tools Part 5 milling machine with table of variable height with vertical spindle First Revision |
|
|
IS 6893 (Part 6) : 1985 Reviewed In : 2019 |
Proforma for purchase Specification for machine tools Part 6 bench pillar type drilling machines |
|
|
IS 6893 (Part 7) : 1990 Reviewed In : 2019 |
Proforma for purchase Specification for machine tools Part 7 external cylindrical grinding machines with horizontal spindle |
|
|
IS 6893 (Part 8) : 1992 Reviewed In : 2019 |
Proforma for purchase Specification for machine tools Part 8 internal cylindrical grinding machines with horizontal spindle |
|
|
IS 6893 (Part 9) : 1990 Reviewed In : 2019 |
Proforma for purchase Specification for machine tools Part 9 surface grinders with horizontal axis |
|
|
IS 6893 (Part 10) : 1992 Reviewed In : 2019 |
Proforma for purchase Specification for machine tools Part 10 copying lathes |
|
|
IS 6893 (Part 11) : 1992 Reviewed In : 2019 |
Proforma for purchase Specification for machine tools Part 11 capstan and turret lathes |
|
|
IS 6893 (Part 12) : 1992 Reviewed In : 2019 |
Proforma for purchase Specification for machine tools Part 12 horizontal boring and milling machines Table Type |
|
|
IS 7227 : 1974 Reviewed In : 2013 |
Recommended diameters of wheels for woodworking table bandsawing machines |
|
|
IS 7229 : 1974 Reviewed In : 2013 |
Recommended working level heights for woodworking machines |
|
|
IS 7287 : 1974 Reviewed In : 2013 |
Recommended working dimensions of woodworking machines |
|
|
IS/ISO 7572 : 1984 Reviewed In : 2013 |
Conditions of Acceptance and Installation for Work-holding Fixed Tables of Machine Tools |
|
|
IS 7764 : 1975 |
Sizes for Drilling Machine |
|
|
IS 7765 : 1975 |
Sizes for Milling Machines with Table fo Various Height with Horizontal or Vertical Spindle |
|
|
IS 7936 : 1976 |
Sizes for Redial Drilling Machines |
|
|
IS 8099 : 1976 Reviewed In : 2010 |
Sizes of collars for circular saw blades for woodworking machines |
|
|
IS 8131 : 1976 Reviewed In : 2013 |
Test chart for circular tables for machine tools table diameter up to 630 mm |
|
|
IS 9809 : 1981 ISO 2433 Reviewed In : 2019 |
Test chart for crankshaft grinding machines |
|
IS 10190 : 2018 ISO 1708 : 1989 Reviewed In : 2023 |
Acceptance conditions for general purpose parallel lathes - Testing of the accuracy First Revision |
|
|
IS 10352 : 2017 ISO 2407 : 1997 Reviewed In : 2022 |
Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy Second Revision |
|
|
IS 10573 : 1983 Reviewed In : 2022 |
Specification for oil sight glass for machine tools |
|
|
IS 10574 : 1983 Reviewed In : 2022 |
Specification for clamp buttons to be used with parallel sided clamp plates |
|
|
IS 10602 : 1983 Reviewed In : 2022 |
Specification for floor plates |
|
|
IS 10612 : 1983 Reviewed In : 2022 |
Specification for 4 - Jaw independent lathe chucks |
|
|
IS 10882 : 1984 Reviewed In : 2022 |
Specification for cam levers |
|
|
IS 11133 : 1984 ISO 5169 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Recommendations for symbols for lubrications appearing on machine tools |
|
|
IS 11278 : 1985 Reviewed In : 2022 |
Specification for jig feet with cylindrical shank |
|
|
IS 11325 : 1985 Reviewed In : 2022 |
Specification for adjustable clamp support |
|
|
IS 11398 : 2018 ISO 6155 : 1998 |
Machine Tools Test Conditions for Horizontal Spindle Turret and Single Spindle Automatic Lathes Testing of the Accuracy First Revision |
|
|
IS 11613 : 1986 Reviewed In : 2022 |
Specification for renewable lock screw locating pins |
|
|
IS 11614 : 1986 Reviewed In : 2022 |
Specification for renewable threaded locating pins |
|
|
IS 11831 : 1986 Reviewed In : 2022 |
Specification for jig foot bolts |
|
|
IS 11843 : 1986 Reviewed In : 2022 |
Specification for jig foot nuts |
|
|
IS 11958 (Part 1) : 2018 ISO 3070-1 : 2007 Reviewed In : 2023 |
Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle Part 1 machines with fixed column and movable table First Revision |
|
|
IS 12242 : 1987 Reviewed In : 2022 |
Specification for door hinges for machine tools |
|
|
IS 12250 : 1987 Reviewed In : 2022 |
Specification for fixed clamp supports |
|
|
IS 12280 : 1988 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for tenon without counterbore |
|
|
IS 12295 : 2000 ISO 3875 Reviewed In : 2018 |
Acceptance conditions for external cylindrical centreless grinding machines - Testing of the accuracy First Revision |
|
|
IS 12296 : 1988 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Test chart for thread rolling machines with cylindrical dies |
|
|
IS 12582 : 1989 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Tommy screws with fixed bar Specification |
|
|
IS 13178 : 1991 Reviewed In : 2022 |
Clamping studs for machine tools - Specification |
|
|
IS 14693 : 1999 Reviewed In : 2022 |
2 - Jaw and 3 - Jaw power operated wedge type chucks - Specification |
|
|
IS 14694 : 1999 Reviewed In : 2022 |
2-Jaw and 3-Jaw Power Operated High Speed Lathe Chucks With Through Bore - Specification |
|
|
IS 14725 : 1999 Reviewed In : 2022 |
2 - Jaw and 3 - Jaw hand operated heavy duty cam type self centering chucks - Specification |
|
|
IS 14872 (Part 3) : 2013 ISO 3408-3 : 2006 Reviewed In : 2023 |
Ball screws Part 3 acceptance conditions and acceptance tests First Revision |
|
|
IS 15649 : 2006 Reviewed In : 2023 |
Machine tools chip bins for chip conveyor - Specification |
|
|
IS 17246 : 2019 ISO 3190 : 1975 Reviewed In : 2023 |
Test Conditions for Turret and Single Spindle Co-ordinate Drilling Machines with Vertical Spindle Testing of the Accuracy |
|
|
IS 17247 (Part 1) : 2019 ISO 3686-1 : 2000 Reviewed In : 2023 |
Test Conditions for High Accuracy Turret and Single Spindle Coordinate Drilling and Boring Machines with Table of Fixed Height with Vertical Spindle Testing of the Accuracy Part 1 Single Column Type Machines |
|
|
IS 17247 (Part 2) : 2019 ISO 3686-2 : 2000 Reviewed In : 2023 |
Test Conditions for High Accuracy Turret and Single Spindle Coordinate Drilling and Boring Machines with Table of Fixed Height with Vertical Spindle Testing of the Accuracy Part 2 Portal Type Machines with Moving Table |
|
|
IS 17248 : 2019 ISO 8956 : 1986 Reviewed In : 2023 |
Acceptance Conditions for Copying Attachments Integral or Otherwise for Lathes Testing of the Accuracy |
|
|
IS 17249 (Part 1) : 2019 ISO 11090-1 : 2014 Reviewed In : 2023 |
Test Conditions for Die Sinking Electro-Discharge Machine Die Sinking EDM Testing of the Accuracy Part 1 Single-Column Machines Cross-slide Table Type and Fixed-Table Type |
|
|
IS 17249 (Part 2) : 2021 ISO 11090-2 : 2014 |
Test conditions for die sinking electro-discharge machines die sinking EDM -- Testing of the accuracy -- Part 2 Double-column machines slide-head type Adoption of ISO 11090-2 2014 ICS 2512040 |
|
|
IS 17250 : 2019 ISO 14137 : 2015 Reviewed In : 2023 |
Test Conditions for Wire Electrical- Discharge Machines Wire EDM Testing of the Accuracy |
|
|
IS 17252 (Part 1) : 2019 ISO 15616-1 : 2003 Reviewed In : 2023 |
Acceptance Tests for CO2-laser Beam Machines for High Quality Welding and Cutting Part 1 General Principles Acceptance Conditions |
|
|
IS 17252 (Part 2) : 2019 ISO 15161-2 : 2003 Reviewed In : 2023 |
Acceptance Tests for CO2-laser Beam Machines for High Quality Welding and Cutting Part 2 Measurement of Static and Dynamic Accuracy |
|
|
IS 17252 (Part 3) : 2020 ISO 15616-3 : 2003 |
Acceptance Tests for CO2-laser Beam Machines for High Quality Welding and Cutting Part 3 Calibration of Instruments for Measurement of Gas Flow and Pressure |
|
|
IS 17252 (Part 4) : 2020 15616-4 : 2008 |
Acceptance Tests for CO2-laser Beam Machines for High Quality Welding and Cutting Part 4 Machines with 2-D Moving Optics |
|
|
IS 18318 : 2023 ISO 239: 1999 |
DRILL CHUCK TAPERS |
|
|
IS 1878 (Part 1) : 1993 ISO 1708 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Test chart for general purpose parallel lathes Part 1 lathes with swing over bed up to 800 mm Second Revision |
|
|
IS 1878 (Part 2) : 1992 ISO 1708 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Test chart for general purpose parallel lathes Part 2 lathes with swing over bed over 800 mm and up to 1600 mm Second Revision |
|
|
IS 1878 (Part 3) : 1998 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Test chart for general purpose parallel lathes Part 3 lathes with swing over bed over 1800 mm and up to 2500 mm |
|
|
IS 2014 : 1996 Reviewed In : 2022 |
T - Bolts - Specification Second Revision |
|
|
IS 2015 : 1977 Reviewed In : 2022 |
Specification for t - Nuts First Revision |
|
|
IS 2161 : 1996 Reviewed In : 2022 |
Coolant pumps for general purpose machine tools - Specification First Revision |
|
|
IS 2243 : 1971 Reviewed In : 2022 |
Specification for drill chucks First Revision |
|
|
IS 2289 : 1976 Reviewed In : 2022 |
Specification for 60 deg dead centres for lathes First Revision |
|
|
IS 2367 : 1981 Reviewed In : 2019 |
Test chart for box type vertical drilling machines First Revision |
|
|
IS 2368 : 2018 Reviewed In : 2023 |
Machine tools - Test conditions for external cylindrical and universal grinding machines with a movable table - Testing of the accuracy Third Revision |
|
|
IS 2425 : 1982 ISO 2773/1 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Test chart for pillar type vertical drilling machines First Revision |
|
|
IS 2426 : 1985 ISO 2773/1 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Test chart for bench drilling machines First revision |
|
|
IS 2534 : 1999 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Carbide tipped dead centres - Specification First Revision |
|
|
IS 2804 : 1998 Reviewed In : 2019 |
Palm grips - Specification First Revision |
|
|
IS 2876 : 2021 |
3-Jaw and 4-Jaw Scroll Manually Operated Self-Centering Lathe Chucks Third Revision |
|
|
IS 2877 : 1986 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Test chart for single and double column planing machines Second Revision |
|
|
IS 2890 : 1983 Reviewed In : 2022 |
Specification for taper handles for machine tools First Revision |
|
|
IS 2909 : 1998 Reviewed In : 2019 |
Star grips - Specification First Revision |
|
|
IS 2990 : 1986 Reviewed In : 2022 |
Specification for tenons First Revision |
|
|
IS 2995 : 1988 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for set collars First Revision |
|
|
IS 3080 : 1965 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Test chart for universal tool and cutter grinders |
|
|
IS 3691 : 1990 ISO 7007 Reviewed In : 2019 |
Woodworking machines - Table bandsawing machines - Nomenclature and acceptance conditions Second Revision |
|
|
IS 3694 : 1991 ISO 7987:85 Reviewed In : 2019 |
Test chart for woodworking turning lathes Second Revision |
|
|
IS 3793 : 1966 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Specification for live centres |
|
|
IS 4291 : 1996 Reviewed In : 2022 |
C - Washers - Specification First Revision |
|
|
IS 4294 : 2018 Reviewed In : 2023 |
Jig buttons - Specification Second Revision |
|
|
IS 4295 : 1983 Reviewed In : 2022 |
Specification for locking dogs Catches with springs First Revision |
|
|
IS 4297 : 1996 Reviewed In : 2022 |
Spherical washers and conical seats - Specification First Revision |
|
|
IS 4298 : 2009 Reviewed In : 2021 |
Swing C- Washers - Specification Second Revision |
|
|
IS 4299 : 1982 Reviewed In : 2022 |
Specification for jig feet First Revision |
|
|
IS 4502 : 1999 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Machine vices - Specification First Revision |
|
|
IS 4816 : 1987 Reviewed In : 2022 |
Specification for permanent - Magnetic chucks Second Revision |
|
|
IS 5093 : 1996 Reviewed In : 2022 |
Locating pins Round - Specification First Revision |
|
|
IS 5094 : 1969 Reviewed In : 2022 |
Dimensions for diamond locating pins |
|
|
IS 6040 : 1993 ISO 1708 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Test chart for precision lathes - Lathes with swing over bed up to 500 mm and distance between centres up to 1500 mm First Revision |
|
|
IS 6080 : 1985 Reviewed In : 2022 |
Specification for double ended clamps First Revision |
|
|
IS 6081 : 1985 Reviewed In : 2022 |
Specification for plain clamps First Revision |
|
|
IS 6082 : 1985 Reviewed In : 2022 |
Specification for slotted clamps First Revision |
|
|
IS 6090 : 1984 Reviewed In : 2022 |
Specification for cam operated clamps First Revision |
|
|
IS 6105 : 1971 Reviewed In : 2022 |
Specification for feed fingers |
|
|
IS 6197 : 2019 Reviewed In : 2023 |
Test chart for vertical boring and turning mills with table diameter up to 1600 mm First Revision |
|
|
IS 6238 : 1971 Reviewed In : 2022 |
Specification for spring collets |
|
|
IS 6335 : 1971 Reviewed In : 2022 |
Specification for knurled thumb nuts Fixtures |
|
|
IS 6336 : 1989 Reviewed In : 2021 |
Screws for thrust pads Fixtures - Specification First Revision |
|
|
IS 6337 : 1989 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Thrust - Pads Fixtures - Specification First Revision |
|
|
IS 6338 : 1989 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Clamping screws Fixtures - Specification First Revision |
|
|
IS 6440 : 1997 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Quick action drilling jigs - Specification First Revision |
|
|
IS 666 (Part 1) : 1972 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Specification for jig bushes Part 1 headed and headless jig bushes Second Revision |
|
|
IS 666 (Part 2) : 1972 Reviewed In : 2018 Reaffirmed but not taken up for revision |
Specification for jig bushes Part 2 renewable drill bushes Second Revision |
|
|
IS 6679 : 1972 Reviewed In : 2019 Reaffirmed but not taken up for revision |
Test chart for general purpose gear shaping machines Table Diameter Up To 1000 Mm |
|
|
IS 7262 : 1996 Reviewed In : 2022 |
Turning mandrels - Specification First Revision |
|
|
IS 7266 : 1991 ISO 7946 Reviewed In : 2019 |
Test chart for woodworking slot mortising machines First Revision |
|
|
IS 7267 : 1991 ISO 7571-1985 Reviewed In : 2019 |
Test chart for woodworking surface planing machines with cutterblock for one - Side dressing First Revision |
|
|
IS 7279 : 1992 ISO 7945-1985 Reviewed In : 2019 |
Test chart for woodwork - ing single spindle boring machines First Revision |
|
|
IS 7286 : 1991 ISO 7950 Reviewed In : 2019 |
Test chart for woodworking single chain mortising machines First Revision |
|
|
IS 7289 : 1992 ISO 7569 Reviewed In : 2019 |
Test chart for woodworking planing machines for two three or four - Side dressing First Revision |
|
|
IS 7296 : 1992 ISO 7570 Reviewed In : 2019 |
Test chart for woodworking surface planing and thicknessing machines First Revision |
|
|
IS 7301 : 1974 Reviewed In : 2021 |
Specification for grinding mandrels |
|
|
IS 7824 : 1995 Reviewed In : 2022 |
Quick change drill chucks collets and floating reamer holders Specification First Revision |
|
|
IS 8165 : 2010 Reviewed In : 2023 |
Acceptance conditions of mechanical dividing heads for machine tools - Testing of accuracy First Revision |
|
|
IS/ISO 8525 : 2008 ISO 8525 : 2008 |
Airborne noise emitted by machine tools - Operating conditions for metal - Cutting machines |
|
|
IS/ISO 8636-1 : 2000 ISO 8636-1 :2000 Reviewed In : 2023 |
Machine tools - Test conditions for bridge - Type milling machines - Testing of the accuracy Part 1 fixed bridge Portal - Type machines First Revision |
|
|
IS/ISO 8636-2 : 2007 ISO 8636-2 : 2007 |
Machine Tools Test Conditions for Bridge-Type Milling Machines Testing of the Accuracy Part 2 Travelling Bridge Gantry-Type Machines |
|
|
IS 8710 : 1978 Reviewed In : 2022 |
Specification for electromagnetic chucks |