BUREAU OF INDIAN STANDARDS
Programme of Work
PGD36 : Fluid Power System
- Scope : a) Standardization in the field of terminology, classifications, symbols, fluid logic, and fluid properties, contamination control, components marking systems and identification codes, sealing devices and their related parameters; hydraulic components and their testing, maintenance and installations; pneumatic components and their testing, installation and maintenance. b) Standardization in the field of ports, fittings, tubes and tube, hoses & hose assemblies and their testing. c) Liaison with: (i) ISO/TC 131 Fluid power systems (P-Member) (ii) ISO/TC 131/SC 1 Terminology, Classification and symbols (P-Member) (iii) ISO/TC 131/SC 2 Pumps, motors and integral transmissions (P-Member) (iv) ISO/TC 131/SC 3 Cylinders (P-Member) (v) ISO/TC 131/SC 4 Connectors and similar products and components (Member) (vi) ISO/TC 131/SC 5 Control products and components (P-Member) (vii) ISO/TC 131/SC 6 Contamination control (P-Member) (viii) ISO/TC 131/SC 8 Product testing (P-Member) (ix) ISO/TC 131/SC 9 Installations and systems (P-Member)
-
Liaison :ISO/TC 131 - Fluid power systems - Participating (P)
ISO/TC 131/SC 1 - Symbols, terminology and classifications - Participating (P)
ISO/TC 131/SC 2 - Participating (P)
ISO/TC 131/SC 3 - Cylinders - Participating (P)
ISO/TC 131/SC 4 - Connectors and similar products and components - Participating (P)
ISO/TC 131/SC 5 - Control products and components - Participating (P)
ISO/TC 131/SC 6 - Contamination control - Participating (P)
ISO/TC 131/SC 7 - Sealing devices - Observer (O)
ISO/TC 131/SC 8 - Product testing - Participating (P)
ISO/TC 131/SC 9 - Installations and systems - Participating (P)
|
IS 10069 : 2023 ISO 4409 : 2019 |
Hydraulic fluid power Positive-Displacement Pumps Motors and Integral Transmissions Methods of Testing and Presenting Basic Steady State Performance
|
-
|
Identical under dual numbering
|
||
|
IS 10103 : 1982 Reviewed In : 2020 |
Method of test for ferrule type couplings used in oil - Hydraulic systems
|
January, 2020
|
3
|
Indigenous
|
|
|
IS 10129 : 2004 ISO 3019-2 Reviewed In : 2020 |
Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors (Second Revision)
|
February, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 10143 : 1995 ISO 6431 Reviewed In : 2020 |
Pneumatic fluid power - Single rod cylinders, 1000 kPa (10 Bmar) series, with detachable mountings, bores from 32 mm to 320 mm - Mounting dimensions (First Revision)
|
February, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 10187 : 2013 ISO 4401: 2005 Reviewed In : 2020 |
Hydraulic fluid power - Four - Port directional control valves - Mounting surfaces (Second Revision)
|
February, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 10410 : 1983 Reviewed In : 2024 |
Specification for lock nuts for bulk head coupling assembly for oil - Hydraulic systems
|
September, 2024
|
1
|
Indigenous
|
|
|
IS 10411 : 2020 ISO 4393 : 2015 |
Fluid Power Systems and Components — Cylinders — Basic Series of Piston Strokes ( First Revision )
|
-
|
-
|
Identical under dual numbering
|
|
|
IS 10416 : 2019 ISO 5598 : 2008 |
Fluid Power Systems and Components ? Vocabulary ( Second Revision )
|
-
|
-
|
Identical under dual numbering
|
|
|
IS 10417 : 1983 Reviewed In : 2024 |
Specification for equal cross coupling assembly for oil - Hydraulic systems
|
September, 2024
|
2
|
Indigenous
|
|
|
IS 10433 (Part 1) : 2023 |
Male Stud Tee Body Stud Run for Oil-Hydraulic Coupling Specification Part 1 Made from Forgings
|
-
|
Indigenous
|
||
|
IS 10433 (Part 2) : 2002 Reviewed In : 2024 |
Male stud tee body (Stud Run) for oil - Hydraulic couplings - Specification: Part 2 made from bar stock (First Revision)
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 10453 (Part 1) : 2023 |
Taper Male Stud Tee Body Stud Run for Oil Hydraulic Couplings Specification Part 1 Made from Forgings
|
-
|
Indigenous
|
||
|
IS 10453 (Part 2) : 2023 |
Taper Male Stud Tee Body Stud Run for Oil Hydraulic Couplings Specification Part 2 Made from Bar Stock
|
-
|
Indigenous
|
||
|
IS 10480 : 1983 Reviewed In : 2018 |
Specification for stud run tee coupling assemblies for oil - Hydraulic systems
|
November, 2018
|
-
|
Indigenous
|
|
|
IS 10480 : 2024 |
Stud run tee coupling assemblies for oil hydraulic systems � Specification (Second Revision)
|
-
|
Indigenous
|
||
|
IS 10481 : 2020 ISO 4413 : 2010 |
Hydraulic Fluid Power — General Rules and Safety Requirements for Systems and their Components ( Second Revision )
|
-
|
-
|
Identical under dual numbering
|
|
|
IS 10585 : 2023 ISO 10100 : 2020 |
Hydraulic fluid power Cylinders Acceptance tests
|
-
|
Identical under dual numbering
|
||
|
IS 10956 : 2023 |
Welding coupling body for oil hydraulic couplings - Specification
|
-
|
Indigenous
|
||
|
IS 10978 : 1984 Reviewed In : 2020 |
Specification for welding coupling assembly for oil - Hydraulic systems
|
February, 2020
|
1
|
Indigenous
|
|
|
10983 : 2021 ISO 5597 : 2018 |
Hydraulic Fluid Power - Cylinders - Dimensions and Tolerances of Housings for Single-Acting Piston and Rod Seals in Reciprocating Applications ( Second Revision )
|
-
|
Identical under dual numbering
|
||
|
IS 11003 (Part 1) : 2017 ISO 6020-1 : 2007 Reviewed In : 2024 |
Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 mpa (160 Bar) series: Part 1 medium series (Second Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 11003 (Part 2) : 2020 ISO 6020-2 : 2015 |
Hydraulic Fluid Power — Mounting Dimensions for Single Rod Cylinders, 16 MPa ( 160 bar ) Series Part 2 Compact Series ( Second Revision )
|
-
|
-
|
Identical under dual numbering
|
|
|
IS 11146 : 1999 ISO 7181 Reviewed In : 2024 |
Hydraulic fluid power - Cylinders - Bore and rod area ratios (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 11147 : 1984 ISO 4391 Reviewed In : 2020 |
Recommendations for parameter definitions and letter symbols for hydraulic fluid power pumps, motors and integral transmissions
|
February, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 11245 : 1999 Reviewed In : 2020 |
Pneumatic cylinders purchase - Specification (First Revision)
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 11277 : 2004 ISO 5596 Reviewed In : 2020 |
Hydraulic fluid power - Gas - Loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities (First Revision)
|
February, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 11337 : 2002 Reviewed In : 2024 |
Purchase Specification for hydraulic cylinders (First Revision)
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 11559 : 1995 ISO 6982 Reviewed In : 2020 |
Hydraulic fluid power - Cylinders - Rod end spherical eyes - Mounting dimensions (First Revision)
|
February, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 11560 : 1995 ISO 6981 Reviewed In : 2020 |
Hydraulic fluid power - Cylinders - Rod end plain eyes - Mounting dimensions (First Revision)
|
February, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 11845 (Part 1) : 1994 ISO 5784-1 Reviewed In : 2020 |
Fluid logic circuits for fluid power systems: Part 1 symbols for binary logic and related functions (First Revision)
|
February, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 11845 (Part 2) : 1995 ISO 5784-2 Reviewed In : 2020 |
Fluid Logic circuits for fluid - Power systems: Part 2 symbols for supply and exhausts as related to logic symbols (First Revision)
|
February, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 11845 (Part 3) : 1994 ISO 5784-3 Reviewed In : 2020 |
Fluid logic circuits for fluid power systems: Part 3 symbols for logic sequencers and related functions
|
February, 2020
|
-
|
Identical under dual numbering
|
|
|
12092 : 2021 ISO 6605 : 2017 |
Hydraulic Fluid Power - Test Methods for Hoses and Hose Assemblies ( First Revision )
|
-
|
Identical under dual numbering
|
||
|
IS 12096 : 1987 Reviewed In : 2024 |
Specification for hexagon socket screw plugs with parallel screw threads for fluid power system
|
September, 2024
|
1
|
Indigenous
|
|
|
IS 12116 (Part 1) : 1987 Reviewed In : 2024 |
Specification for hexagon head taper plugs for oil hydraulic systems: Part 1 made from forgings
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 12484 : 1999 Reviewed In : 2020 |
Cup seal for fluid power applications - Specification (First Revision)
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 12485 : 1988 Reviewed In : 2020 |
Specification for metal bonded seals
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 12498 : 1988 Reviewed In : 2024 |
Method of test for evaluation of performance of air pressure regulators
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 12593 : 2000 ISO 8131 Reviewed In : 2020 |
Hydraulic fluid power - Single rod cylinders, 16 mpa (160 Bar) compact series - Tolerances (First Revision)
|
February, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 12597 : 1988 Reviewed In : 2024 |
Recommendation on units for fluid power system
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 12723 : 2020 ISO 6432 : 2015 |
Pneumatic Fluid Power - Single Rod Cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm - Basic and Mounting Dimensions ( First Revision )
|
-
|
-
|
Identical under dual numbering
|
|
|
12725 : 2021 ISO 4414 : 2010 |
Pneumatic Fluid Power - General Rules and Safety Requirements for Systems and their Components ( Second Revision )
|
-
|
Identical under dual numbering
|
||
|
IS 12738 : 1995 ISO 6430 Reviewed In : 2020 |
Pneumatic fluid power 7 single rod cylinders, 1 000 kPa (Ib 10 bar) Series, With Integral Mountings, Bores From 32 Mm To 250 Mm - Mounting Dimensions (First Revision)
|
February, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 13053 : 1991 Reviewed In : 2024 |
Hydraulic fluid power system commissiontng and maintenance of complete hydraulic systems recommendations
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 13085 : 1991 ISO 8136 Reviewed In : 2024 |
Hydraulic fluid power - Single rod cylinders, 160 bar (16 Mpa) medium series - Port dimensions
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
13086 : 2021 ISO 8139 : 2018 |
Pneumatic Fluid Power - Cylinders, 1 000 kPa ( 10 bar ) Series - Mounting Dimensions of Rod-end Spherical Eyes ( Second Revision )
|
-
|
Identical under dual numbering
|
||
|
13087 : 2021 ISO 8140 : 2018 |
Pneumatic Fluid Power - Cylinders, 1 000 kpa ( 10 bar ) Series - Mounting Dimensions of Rod-end Clevises ( Second Revision )
|
-
|
Identical under dual numbering
|
||
|
IS 13102 : 1991 ISO 8137 Reviewed In : 2024 |
Hydraulic - Fluid power - Single rod cylinders, 250 bar (25 Mpa) series - Port dimensions
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13103 : 2005 ISO 8138 Reviewed In : 2020 |
Hydraulic fluid power - Single rod cylinders, 16 mpa (160 Bar) compact series - Port dimensions (First Revision)
|
February, 2020
|
-
|
Identical under dual numbering
|
|
|
13170 : 2021 ISO 6149-1 : 2019 |
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated housing for O-ring seal
|
-
|
Identical under dual numbering
|
||
|
13170 : 2021 ISO 6149-2 : 2006 |
Connections for Hydraulic Fluid Power and General Use - Ports and Stud Ends with ISO 261 Metric Threads and O-Ring Sealing Part 2 Dimensions, Design, Test Methods and Requirements for Heavy-Duty ( S Series ) Stud Ends ( First Revision )
|
-
|
Identical under dual numbering
|
||
|
13170 : 2021 ISO 6149-3 : 2006 |
Connections for Hydraulic Fluid Power and General Use — Ports and Stud Ends with ISO 261 Metric Threads and O-Ring Sealing Part 3 Dimensions, Design, Test Methods and Requirements for Light-Duty ( L Series ) Stud Ends ( First Revision )
|
-
|
Identical under dual numbering
|
||
|
IS 13251 : 2019 ISO 8132 : 2014 |
Hydraulic fluid power ? mounting dimensions for accessories for single rod cylinders, 16 mpa (160 Bar) medium and 25 mpa (250 Bar) series (First Revision)
|
-
|
-
|
Identical under dual numbering
|
|
|
IS 13336 : 1992 Reviewed In : 2024 |
Reducer coupling assemblies for oil hydraulic system - Specification
|
September, 2024
|
1
|
Indigenous
|
|
|
IS 13337 : 1992 Reviewed In : 2024 |
Straight reducer coupling body for oil hydraulic system - Specification
|
September, 2024
|
1
|
Indigenous
|
|
|
IS 13338 : 1992 Reviewed In : 2024 |
Hexagonal head screw plugs with shoulder and parallel screw threads - Specification
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 13434 : 2005 ISO 8135 Reviewed In : 2020 |
Hydraulic fluid power - Single rod cylinders, 16 mpa (160 Bar) medium and 25 mpa (250 Bar) series - Tolerances (First Revision)
|
February, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 13533 : 2019 ISO 4395 : 2009 Reviewed In : 2023 |
Fluid power systems and components ? cylinder piston rod end types and dimensions (First Revision)
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 13534 : 2023 ISO 4411 : 2019 |
Hydraulic Fluid Power Valves Determination of Pressure Differential Flow Characteristics
|
-
|
Identical under dual numbering
|
||
|
IS 13534 : 2023 ISO 4411 : 2019 |
Hydraulic Fluid Power Valves Determination of Pressure Differential Flow Characteristics
|
-
|
Identical under dual numbering
|
||
|
IS 13535 : 2017 ISO 16889 : 2008 Reviewed In : 2024 |
Hydraulic fluid power - Filters - Filter multi - Pass method for evaluating filtration performance of filter element (Second Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13542 : 2023 ISO 4406 : 2021 |
Hydraulic fluid power Fluids Method for coding the level of contamination by solid particles
|
-
|
Identical under dual numbering
|
||
|
IS 13569 : 1993 ISO 3722 Reviewed In : 2023 |
Hydraulic fluid power - Fluid sample containers - Qualifying and controlling cleaning methods
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 13570 : 2000 ISO 4021 Reviewed In : 2023 |
HYDRAULIC FLUID POWER - PARTICULATE CONTAMINATION ANALYSIS - EXTRACTlON OF FLUID SAMPLES FROM LINES OF AN OPERATING SYSTEM (First Revision)
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 13571 : 2020 ISO 11171 : 2016 |
Hydraulic Fluid Power — Calibration of Automatic Particle Counters for Liquids ( First Revision )
|
-
|
-
|
Identical under dual numbering
|
|
|
13614 : 2021 ISO 7241 : 2014 |
Hydraulic Fluid Power - Dimensions and Requirements of Quick-Action Couplings Part 1 Dimensions and Requirements ( First Revision )
|
-
|
Identical under dual numbering
|
||
|
IS 13614 (Part 2) : 1993 ISO 7241-2 Reviewed In : 2024 |
Hydraulic fluid power - Quick - Action couplings: Part 2 test methods
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 13617 : 1992 Reviewed In : 2024 |
Evaluation of pressure drop versus flow characteristics of pneumatic filters - Method of test
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 13876 (Part 1) : 1993 Reviewed In : 2024 |
Guide for marking system for fluid power components: Part 1 cylinders
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 13876 (Part 2) : 1993 Reviewed In : 2024 |
Guide for marking system for fluid power components: Part 2 valves
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 13876 (Part 3) : 1993 Reviewed In : 2024 |
Guide for marking system for fluid power components: Part 3 pumps and motors
|
September, 2024
|
-
|
Indigenous
|
|
|
14148 : 2021 ISO 5781 : 2016 |
Hydraulic Fluid Power - Pressure-reducing Valves, Sequence Valves, Unloading Valves, Throttle Valves and Check Valves - Mounting Surfaces ( Second Revision )
|
-
|
Identical under dual numbering
|
||
|
IS 14150 : 2005 ISO 6264 Reviewed In : 2020 |
Hydraulic fluid power - Pressure relief valves - Mounting surfaces (First Revision)
|
February, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 14167 : 2019 ISO 10099 : 2001 Reviewed In : 2023 |
Pneumatic fluid power ? cylinders ? final examination and acceptance criteria (First Revision)
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 14235 : 1995 Reviewed In : 2020 |
Wiper seals used for fluid power application - Specification
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 14236 : 1995 Reviewed In : 2020 |
Sealsfor reciprocating applications used in fluid power systems methods of test
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 14237 : 1995 Reviewed In : 2020 |
U - Type seals with asymmetrical and symmetrical lips used for fluid power application - Specification
|
February, 2020
|
-
|
Indigenous
|
|
|
14423 : 2021 ISO 4399 : 2019 |
Fluid Power Systems and Components - Connectors and Associated Components - Nominal Pressures ( First Revision )
|
-
|
Identical under dual numbering
|
||
|
IS 14528 : 1998 Reviewed In : 2024 |
Tube end straight reducers for oil - Hydraulic couplings
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 14601 : 1998 Reviewed In : 2020 |
Method for presenting performance data for hydraulic pumps
|
February, 2020
|
-
|
Indigenous
|
|
|
IS 14602 : 1999 Reviewed In : 2024 |
Installation methods of positive displacement hydraulic pumps and motors - Guidelines
|
September, 2024
|
1
|
Indigenous
|
|
|
IS 14604 : 1998 Reviewed In : 2024 |
Proforma for purchase Specification for positive displacement pumps and motors used in oil hydraulic systems
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 14740 (Part 1) : 2021 ISO 6358-1 : 2013 |
Pneumatic Fluid Power - Determination of Flow-Rate Characteristics of Components Using Compressible Fluids Part 1 General Rules and Test Methods for Steady-State Flow ( First Revision )
|
-
|
Identical under dual numbering
|
||
|
IS 14740 (Part 2) : 2021 ISO 6358-2 : 2019 |
Pneumatic Fluid Power - Determination of Flow-Rate Characteristics of Components Using Compressible Fluids Part 2 Alternative Test Methods ( First Revision )
|
-
|
Identical under dual numbering
|
||
|
IS 14740 (Part 3) : 2021 ISO 6358-3 : 2014 |
Pneumatic Fluid Power - Determination of Flow-Rate Characteristics of Components Using Compressible Fluids Part 3 Method for Calculating Steady-State Flow-Rate Characteristics of Systems ( First Revision )
|
1
|
Identical under dual numbering
|
||
|
IS 14848 : 2000 ISO 3662 Reviewed In : 2020 |
Hydraulic fluid power - Pumps and motors - Geometric displacements
|
February, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 14849 (Part 1) : 2017 ISO 4392-1 : 2002 Reviewed In : 2024 |
Hydraulic fluid power - Determination of characteristics of motors: Part 1 at constant low speed and at constant pressure (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 14849 (Part 2) : 2018 ISO 4392-2 : 2002 Reviewed In : 2024 |
Hydraulic fluid power - Determination of characteristics of motors: Part 2 startability (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 14849 (Part 3) : 2005 ISO 4392-3 Reviewed In : 2020 |
Hydraulic fluid power - Determination of characteristics of motors: Part 3 at constant flow and at constant torque
|
February, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 14875 : 2000 Reviewed In : 2024 |
Compressed air filters - Evaluation parameters
|
September, 2024
|
-
|
Not Equivalent
|
|
|
IS 14876 : 2020 |
Pneumatic Fluid Power ? Compressed-air lubricators Part 1 Main Characteristics to be Included in Supplier’s Literature and Product-marking Requirements ( First Revision )
|
-
|
-
|
Identical under dual numbering
|
|
|
15045 : 2021 ISO 5599-1 : 2001 |
Pneumatic Fluid Power - Five-Port Directional Control Valves Part 1 Mounting Interface Surfaces without Electrical Connector ( First Revision )
|
-
|
Identical under dual numbering
|
||
|
15045 : 2021 ISO 5599-2 : 2001 |
Pneumatic Fluid Power - Five-Port Directional Control Valves Part 2 Mounting Interface Surfaces with Optional Electrical Connector ( First Revision )
|
-
|
Identical under dual numbering
|
||
|
IS 15045 (Part 3) : 2001 ISO 5599-3 Reviewed In : 2024 |
Pneumatic fluid power - Five port directional control valves: Part 3 code system for communication of valve functions
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 15097 : 2002 ISO 6150 Reviewed In : 2024 |
Pneumatic fluid power - Cylindrical quick - Action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 Mpa, 1.6 Mpa And 2.5 Mpa) - Plug connecting dimensions, Specifications, application guidelines and testing
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 15168 : 2022 ISO 6099 : 2018 |
Fluid Power Systems And Components Cylinders Identification Code For Mounting Dimensions And Mounting Types First revision of IS 15168 Adoption of ISO 6099 : 2018 ICS 2310020
|
-
|
Identical under dual numbering
|
||
|
IS 15170 : 2017 ISO/TR 10949 : 2002 Reviewed In : 2024 |
Hydraulic fluid power - Component cleanliness - Guidelines for achieving and controlling cleanliness of components from manufacturer to installation (First Revision)
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 15179 : 2002 ISO 6072 Reviewed In : 2023 |
Hydraulic fluid power - Compatibility between elastomeric materials and fluids
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15181 (Part 1) : 2024 ISO 9110-1 : 2020 |
Hydraulic Fluid Power � Measurement Techniques Part 1 General Measurement Principles (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 15181 (Part 2) : 2024 ISO 9110-2 : 2020 |
Hydraulic Fluid Power � Measurement Techniques � Part 2 Measurement of Average Steady-State Pressure in a Closed Conduit (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 15276 : 2002 ISO 8434-4 Reviewed In : 2024 |
Metallic tube connections for fluid power and general use 24° cone connectors with o - Ring weld - On nipples
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 15277 : 2002 ISO 8434-5 Reviewed In : 2024 |
Metallic tube connections for fluid power and general use test methods for threaded hydraulic fluid power connections
|
September, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 15331 : 2003 ISO 11727 Reviewed In : 2023 |
Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15332 : 2003 ISO 7285 Reviewed In : 2023 |
Pneumatic cylinders for mechanized multiple spot welding
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15432 : 2003 ISO 7986 Reviewed In : 2023 |
Hydraulic fluid power - Sealing devices - Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 15577 (Part 1) : 2005 ISO 9974-1 Reviewed In : 2020 |
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or Metal - to - Metal sealing: Part 1 threaded ports
|
February, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 15577 (Part 2) : 2005 ISO 9974-2 Reviewed In : 2020 |
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or Metal - to - Metal sealing: Part 2 stud ends with elastomeric sealing (Type E)
|
February, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 15577 (Part 3) : 2005 ISO 9974-3 Reviewed In : 2022 |
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or Metal - to - Metal sealing: Part 3 stud ends with metal - To - Metal sealing (Type B)
|
March, 2022
|
-
|
Identical under dual numbering
|
|
|
IS 17091 : 2023 ISO 14743 : 2020 |
Pneumatic Fluid Power Push-in Connectors for Thermoplastic Tubes
|
-
|
Identical under dual numbering
|
||
|
IS 17215 : 2019 |
Fluid Power System ― Hexagon Socket Screw Plugs with Parallel Screw Threads with Elastomeric Sealing ― Specification
|
-
|
Indigenous
|
||
|
IS 18159 : 2023 |
Online Leakage Sealing Systems Code of Practise
|
-
|
Indigenous
|
||
|
IS/ISO 3939 : 1977 Reviewed In : 2023 |
Fluid power systems and components - Multiple lip packing sets - Methods for measuring stack heights
|
August, 2023
|
-
|
Identical under single numbering
|
|
|
IS/ISO 4412-1 : 1991 Reviewed In : 2020 |
Hydraulic fluid power - Test code for determination ok airborne noise levels: Part 1 pumps
|
January, 2020
|
-
|
Identical under single numbering
|
|
|
IS/ISO 4412-2 : 1991 Reviewed In : 2020 |
Hydraulic fluid power - Test code for determination of airborne noise levels: Part 2 motors
|
January, 2020
|
-
|
Identical under single numbering
|
|
|
IS/ISO 4412-3 : 1991 Reviewed In : 2020 |
Hydraulic fluid power - Test code for determination of airborne noise levels: Part 3 pumps - Method using a parallelepiped microphone array
|
January, 2020
|
-
|
Identical under single numbering
|
|
|
IS 5107 : 2004 ISO 2944 Reviewed In : 2020 |
Fluid power systems and components - Nominal pressures (First Revision)
|
January, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 5108 : 1969 Reviewed In : 2024 |
Recommendation on nominal rates of flow for oil - Hydraulic system elements
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 5109 : 1969 Reviewed In : 2024 |
Recommendation on nominal bores for oil - Hydraulic system elements
|
September, 2024
|
-
|
Indigenous
|
|
|
IS/ISO 6547 : 1981 Reviewed In : 2020 |
Hydraulic fluid power - Cylinders - Piston seal housings incorporating bearing rings - Dimensions and tolerances
|
January, 2020
|
-
|
Identical under single numbering
|
|
|
IS/ISO 7425-1 : 2021 ISO 7425-1 : 2021 |
Hydraulic Fluid Power Cylinders � Dimensions and Tolerances of Housings for Elastomer-Energized, Plastic-Faced Seals Part 1 Piston Seal Housings
|
-
|
Identical under single numbering
|
||
|
IS/ISO 7425-2 : 1989 Reviewed In : 2020 |
Hydraulic fluid power - Housings for elastomer - Energized, plastic - Faced seals - Dimensions and tolerances: Part 2 rod seal housings
|
January, 2020
|
-
|
Identical under single numbering
|
|
|
IS 7513 (Part 1) : 2019 Reviewed In : 2023 |
Fluid Power Systems and Components ― Graphical Symbols and Circuit Diagrams Part 1 Graphical Symbols for Conventional Use and Data-Processing Applications ( First Revision )
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 7513 (Part 2) : 2019 ISO 1219-2 : 2012 Reviewed In : 2023 |
Fluid power systems and components ? graphical symbols and circuit diagrams: Part 2 circuit diagrams (First Revision)
|
August, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 7513 (Part 3) : 2021 ISO 1219-3 : 2016 |
Fluid Power Systems and Components Graphical Symbols and Circuit Diagrams Part 3 Symbol modules and connected symbols in circuit diagrams ICS 0108030 2310001 Adoption of ISO 1219-3 : 2016
|
-
|
Identical under dual numbering
|
||
|
IS 8208 : 2020 ISO 3320 : 2013 |
Fluid Power Systems and Components — Cylinder Bores and Piston Rod Diameters and Area Ratios — Metric Series ( Second Revision )
|
-
|
-
|
Identical under dual numbering
|
|
|
IS 8383 : 2023 ISO 2942 : 2018 |
Hydraulic Fluid Power Filter Elements Verification of Fabrication Integrity and Determination of the First Bubble Point
|
-
|
Identical under dual numbering
|
||
|
IS 8384 : 2013 ISO 2941: 2009 Reviewed In : 2020 |
Hydraulic fluid power - Filter elements - Verification of collapse/burst pressure rating (First Revision)
|
January, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 8385 : 2005 ISO 2943 Reviewed In : 2020 |
Hydraulic fluid power - Filter elements - Verification of material compatibility with fluids (First Revision)
|
January, 2020
|
-
|
Identical under dual numbering
|
|
|
IS 8386 : 1977 ISO 3723 Reviewed In : 2020 |
Method of test for end - Load rating of oil hydraulic filter elements
|
January, 2020
|
1
|
Not Equivalent
|
|
|
IS 8526 : 1994 ISO 7180 Reviewed In : 2020 |
Sizes for bores and port threads for pneumatic fluid power cylinders - Recommendations (First Revision)
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 8532 : 2013 ISO 3724 :2007 Reviewed In : 2020 |
Hydraulic fluid power - Filter elements - Determination of resistance to flow fatigue using particulate contaminant (Second Revision)
|
January, 2020
|
-
|
Not Equivalent
|
|
|
IS 8801 : 1978 Reviewed In : 2024 |
Specification for male stud coupling body for oil - Hydraulic couplings
|
September, 2024
|
3
|
Indigenous
|
|
|
IS 8802 : 1987 Reviewed In : 2024 |
Specification for ferrules for oil hydraulic couplings (First Revision)
|
September, 2024
|
2
|
Indigenous
|
|
|
IS 8803 : 1987 Reviewed In : 2024 |
Specification for coupling nuts for oil hydraulic system (First Revision)
|
September, 2024
|
1
|
Indigenous
|
|
|
IS 8805 : 2002 Reviewed In : 2024 |
General requirements for ferrule type couplings used in oil hydraulic systems (First Revision)
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 9269 : 2023 ISO 3968 : 2017 |
Hydraulic fluid power Filters Evaluation of Differential Pressure Versus Flow
|
-
|
Identical under dual numbering
|
||
|
IS 9387 (Part 1) : 2018 Reviewed In : 2024 |
Specification for taper male stud elbow body for oil - Hydraulic c0upling: Part 1 made from forgings zyxw
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 9387 (Part 2) : 2018 Reviewed In : 2024 |
Specification for taper male stud elbow body for oil - Hydraulic couplings: Part 2 made from bar stock
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 9388 (Part 1) : 1979 Reviewed In : 2024 |
Specification for equal elbow body for oil - Hydraulic couplings: Part 1 made from forgings
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 9388 (Part 2) : 2019 |
Equal elbow body for oil - Hydraulic couplings - Specification: Part 2 made from bar stock (First Revision)
|
-
|
-
|
Indigenous
|
|
|
IS 9389 (Part 1) : 2018 Reviewed In : 2024 |
Specification for - Equal tee - Body for oil - Hydraulic couplins: Part 1 tee body made from forgings
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 9389 (Part 2) : 2018 Reviewed In : 2024 |
Specification for equal tee body for oil - Hydraulic couplings: Part 2 made from bar stock
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 9390 : 2018 Reviewed In : 2024 |
Specification for straight coupling body for oil - Hydraulic couplings
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 9391 : 1980 Reviewed In : 2024 |
Specification for straight coupling assemblies for oil - Hydraulic systems
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 9392 : 1980 Reviewed In : 2024 |
Specification for taper male stud coupling body for oil - Hydraulic couplings
|
September, 2024
|
1
|
Indigenous
|
|
|
IS 9411 : 1980 Reviewed In : 2024 |
Specification for elbow coupling assemblies for oil - Hydraulic systems
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 9412 (Part 1) : 1980 Reviewed In : 2018 |
Specification for male stud elbow body for oil - Hydraulic couplings: Part 1 made from forgings
|
November, 2018
|
-
|
Indigenous
|
|
|
IS 9412 (Part 1) : 2024 |
Male Stud Elbow Body for Oil - Hydraulic Couplings Specification Part 1 Made from Forgings
|
-
|
Indigenous
|
||
|
IS 9412 (Part 2) : 1980 Reviewed In : 2018 |
Specification for male stud elbow body for oil - Hydraulic couplings: Part 2 made from bar stock
|
November, 2018
|
1
|
Indigenous
|
|
|
IS 9645 : 2005 Reviewed In : 2020 |
Hexagon socket pipe plugs (First Revision)
|
January, 2020
|
-
|
Indigenous
|
|
|
IS 9724 (Part 1) : 1981 Reviewed In : 2024 |
Specification for taper male stud tee body (Stud Branch) for oil - Hydraulic couplings: Part 1 made from forgings
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 9724 (Part 2) : 2024 |
Taper male stud tee body (Stud branch) for oil hydraulic couplings � Specification: Part 2 Made from bar stock (first revision)
|
-
|
Indigenous
|
||
|
IS 9724 (Part 2) : 1981 Reviewed In : 2024 |
Specification for taper male stud tee body (Stud Branch) for oil - Hydraulic couplings: Part 2 made from bar stock
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 9725 (Part 1) : 1981 Reviewed In : 2024 |
Specification for male stud tee body (Stud Branch) for oil - Hydraulic couplings: Part 1 made from forgings
|
September, 2024
|
1
|
Indigenous
|
|
|
IS 9725 (Part 2) : 2023 |
Male Stud Tee Body Stud Branch For Oil Hydraulic Couplings Specification Part 2 Made From Bar Stock
|
-
|
Indigenous
|
||
|
IS 9746 (Part 1) : 2021 |
Equal Cross Body for Oil Hydraulic Coupling Specification Part 1 Made from Forgings
|
-
|
Indigenous
|
||
|
IS 9746 (Part 2) : 1981 Reviewed In : 2018 |
Specification for equal cross body for oil - Hydraulic couplings: Part 2 made from bar stock
|
November, 2018
|
1
|
Indigenous
|
|
|
IS 9757 (Part 1) : 2023 |
Bulkhead Elbow Body for Oil Hydraulic Couplings Specification Part 1 Made from Forgings
|
-
|
Indigenous
|
||
|
IS 9757 (Part 2) : 1983 Reviewed In : 2018 |
Specification for bulkhead elbow body for oil - Hydraulic couplings: Part 2 made from bar stock
|
November, 2018
|
1
|
Indigenous
|
|
|
IS 9757 (Part 2) : 2024 |
Bulkhead Elbow Body or Oil Hydraulic Couplings Specification Part 2 Made from Bar Stock
|
-
|
Indigenous
|
||
|
IS 9767 : 1981 Reviewed In : 2024 |
Specification for tee coupling assemblies for oil - Hydraulic systems
|
September, 2024
|
-
|
Indigenous
|
|
|
IS 9768 : 2024 |
Bulkhead straight body for oil - Hydraulic Couplings Specification (Second Revision)
|
-
|
Indigenous
|
||
|
IS 9769 : 1981 Reviewed In : 2024 |
Specification for bulkhead straight coupling assembly for oil - Hydraulic systems
|
September, 2024
|
1
|
Indigenous
|
|
|
IS 9770 : 1981 Reviewed In : 2024 |
Specification for bulkhead elbow coupling assembly for oil - Hydraulic systems
|
September, 2024
|
1
|
Indigenous
|
| No Records Found |
|
PGD 36 (20471)
|
Fluid Power Systems Installation of Hydraulic Cylinders Guidelines |
PGD 36 (24560) Revision of: IS 15277:2002 |
Metallic Tube Connections for Fluid Power and General Use Test Methods for Hydraulic Fluid Power Connections |
|
PGD 36 (17550)
Revision of: IS 14604:1998 |
PROFORMA FOR PURCHASE OF POSITIVE DISPLACEMENT PUMPS AND MOTORS USED IN OIL HYDRAULIC SYSTEMS SPECIFICATION |
|
|
PGD 36 (23662)
|
Hydraulic Fluid Power Calibration of Automatic Particle Counters for Liquids |
|
|
PGD 36 (23666)
Revision of: IS 10416:2019 |
Fluid Power Systems and Components Vocabulary |
|
|
PGD 36 (24419)
Revision of: IS 15097:2002 |
Pneumatic fluid power Cylindrical Quick-action Couplings for Maximum Working Pressures of 1 MPa 16 MPa and 25 MPa 10 bar 16 bar and 25 bar Plug Connecting Dimensions Specifications Application Guidelines and Testing |
|
|
PGD 36 (24420)
Revision of: IS 13614:1995 |
Hydraulic Fluid Power Dimensions and Requirements of Quick-Action Couplings Part 1 Dimensions and Requirements |
|
|
PGD 36 (24562)
Revision of: IS 13614:1993 |
Hydraulic Fluid Power Quick-Action Couplings Part 2 Test methods |
|
|
PGD 36 (24563)
Revision of: IS 13535:2017 |
Hydraulic Fluid Power Filters Filter Multi-pass Method for Evaluating Filtration Performance of Filter Element |
|
|
PGD 36 (24564)
Revision of: IS 13170:1999 |
Connections for Hydraulic Fluid Power and General Use Ports and Stud Ends with ISO 261 Metric Threads and O-Ring Sealing Part 1 Ports with Truncated Housing for O-Ring Seal |
PGD 36 (18526)
Revision of: IS 9746:1981 |
Equal Cross Body for Oil Hydraulic Couplings Specification Part 2 Made from Bar Stocks |
|
PGD 36 (21665)
Revision of: IS/ISO 7425:1989 |
Hydraulic Fluid Power Cylinders Dimensions and Tolerances of Housings for Elastomer Energized Plastic-Faced Seals Part 2 Rod Seal Housings |
|
PGD 36 (17530)
Revision of: IS 15276:2002 |
Metallic Tube Connections for Fluid Power And General Use Part 1 24 Cone Connectors |
|
|
IS 14645 : 1998 Reviewed In : 2008 |
Fluid power systems and components - Cylinders - Nominal pressure |
|
|
IS 14740 : 1999 ISO 6358 Reviewed In : 2020 |
Pneumatic fluid power - Components using compressible fluids - Determination of flow - Rate characteristics |
|
|
IS 7513 : 1974 ISO 1219 Reviewed In : 2018 |
Graphical symbols for fluid power systems |
|
|
IS 8805 (Part 1) : 1978 Reviewed In : 1994 |
General requirements for ferrule type couplings used in oil-hydraulic system Part 1 General |
|
IS 10103 : 1982 Reviewed In : 2020 |
Method of test for ferrule type couplings used in oil - Hydraulic systems |
|
|
IS 10187 : 2013 ISO 4401: 2005 Reviewed In : 2020 |
Hydraulic fluid power - Four - Port directional control valves - Mounting surfaces Second Revision |
|
|
IS 10410 : 1983 Reviewed In : 2024 |
Specification for lock nuts for bulk head coupling assembly for oil - Hydraulic systems |
|
|
IS 10417 : 1983 Reviewed In : 2024 |
Specification for equal cross coupling assembly for oil - Hydraulic systems |
|
|
IS 10433 (Part 1) : 2023 |
Male Stud Tee Body Stud Run for Oil-Hydraulic Coupling Specification Part 1 Made from Forgings |
|
|
IS 10433 (Part 2) : 2002 Reviewed In : 2024 |
Male stud tee body Stud Run for oil - Hydraulic couplings - Specification Part 2 made from bar stock First Revision |
|
|
IS 10453 (Part 1) : 2023 |
Taper Male Stud Tee Body Stud Run for Oil Hydraulic Couplings Specification Part 1 Made from Forgings |
|
|
IS 10453 (Part 2) : 2023 |
Taper Male Stud Tee Body Stud Run for Oil Hydraulic Couplings Specification Part 2 Made from Bar Stock |
|
|
IS 10480 : 2024 |
Stud run tee coupling assemblies for oil hydraulic systems Specification Second Revision |
|
|
IS 10956 : 2023 |
Welding coupling body for oil hydraulic couplings - Specification |
|
|
IS 10978 : 1984 Reviewed In : 2020 |
Specification for welding coupling assembly for oil - Hydraulic systems |
|
|
10983 : 2021 ISO 5597 : 2018 |
Hydraulic Fluid Power - Cylinders - Dimensions and Tolerances of Housings for Single-Acting Piston and Rod Seals in Reciprocating Applications Second Revision |
|
|
IS 12096 : 1987 Reviewed In : 2024 |
Specification for hexagon socket screw plugs with parallel screw threads for fluid power system |
|
|
IS 12116 (Part 1) : 1987 Reviewed In : 2024 |
Specification for hexagon head taper plugs for oil hydraulic systems Part 1 made from forgings |
|
|
IS 12484 : 1999 Reviewed In : 2020 |
Cup seal for fluid power applications - Specification First Revision |
|
|
IS 12485 : 1988 Reviewed In : 2020 |
Specification for metal bonded seals |
|
|
IS 12498 : 1988 Reviewed In : 2024 |
Method of test for evaluation of performance of air pressure regulators |
|
|
IS 12593 : 2000 ISO 8131 Reviewed In : 2020 |
Hydraulic fluid power - Single rod cylinders 16 mpa 160 Bar compact series - Tolerances First Revision |
|
|
IS 12597 : 1988 Reviewed In : 2024 |
Recommendation on units for fluid power system |
|
|
IS 12723 : 2020 ISO 6432 : 2015 |
Pneumatic Fluid Power - Single Rod Cylinders 1 000 kPa 10 bar series bores from 8 mm to 25 mm - Basic and Mounting Dimensions First Revision |
|
|
IS 12738 : 1995 ISO 6430 Reviewed In : 2020 |
Pneumatic fluid power 7 single rod cylinders 1 000 kPa Ib 10 bar Series With Integral Mountings Bores From 32 Mm To 250 Mm - Mounting Dimensions First Revision |
|
|
IS 13053 : 1991 Reviewed In : 2024 |
Hydraulic fluid power system commissiontng and maintenance of complete hydraulic systems recommendations |
|
|
IS 13085 : 1991 ISO 8136 Reviewed In : 2024 |
Hydraulic fluid power - Single rod cylinders 160 bar 16 Mpa medium series - Port dimensions |
|
|
IS 13102 : 1991 ISO 8137 Reviewed In : 2024 |
Hydraulic - Fluid power - Single rod cylinders 250 bar 25 Mpa series - Port dimensions |
|
|
IS 13103 : 2005 ISO 8138 Reviewed In : 2020 |
Hydraulic fluid power - Single rod cylinders 16 mpa 160 Bar compact series - Port dimensions First Revision |
|
|
13170 : 2021 ISO 6149-1 : 2019 |
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1 Ports with truncated housing for O-ring seal |
|
|
13170 : 2021 ISO 6149-2 : 2006 |
Connections for Hydraulic Fluid Power and General Use - Ports and Stud Ends with ISO 261 Metric Threads and O-Ring Sealing Part 2 Dimensions Design Test Methods and Requirements for Heavy-Duty S Series Stud Ends First Revision |
|
|
13170 : 2021 ISO 6149-3 : 2006 |
Connections for Hydraulic Fluid Power and General Use Ports and Stud Ends with ISO 261 Metric Threads and O-Ring Sealing Part 3 Dimensions Design Test Methods and Requirements for Light-Duty L Series Stud Ends First Revision |
|
|
IS 13336 : 1992 Reviewed In : 2024 |
Reducer coupling assemblies for oil hydraulic system - Specification |
|
|
IS 13337 : 1992 Reviewed In : 2024 |
Straight reducer coupling body for oil hydraulic system - Specification |
|
|
IS 13338 : 1992 Reviewed In : 2024 |
Hexagonal head screw plugs with shoulder and parallel screw threads - Specification |
|
|
IS 13434 : 2005 ISO 8135 Reviewed In : 2020 |
Hydraulic fluid power - Single rod cylinders 16 mpa 160 Bar medium and 25 mpa 250 Bar series - Tolerances First Revision |
|
|
IS 13534 : 2023 ISO 4411 : 2019 |
Hydraulic Fluid Power Valves Determination of Pressure Differential Flow Characteristics |
|
|
13614 : 2021 ISO 7241 : 2014 |
Hydraulic Fluid Power - Dimensions and Requirements of Quick-Action Couplings Part 1 Dimensions and Requirements First Revision |
|
|
IS 13614 (Part 2) : 1993 ISO 7241-2 Reviewed In : 2024 |
Hydraulic fluid power - Quick - Action couplings Part 2 test methods |
|
|
14148 : 2021 ISO 5781 : 2016 |
Hydraulic Fluid Power - Pressure-reducing Valves Sequence Valves Unloading Valves Throttle Valves and Check Valves - Mounting Surfaces Second Revision |
|
|
IS 14150 : 2005 ISO 6264 Reviewed In : 2020 |
Hydraulic fluid power - Pressure relief valves - Mounting surfaces First Revision |
|
|
IS 14235 : 1995 Reviewed In : 2020 |
Wiper seals used for fluid power application - Specification |
|
|
IS 14236 : 1995 Reviewed In : 2020 |
Sealsfor reciprocating applications used in fluid power systems methods of test |
|
|
IS 14237 : 1995 Reviewed In : 2020 |
U - Type seals with asymmetrical and symmetrical lips used for fluid power application - Specification |
|
|
14423 : 2021 ISO 4399 : 2019 |
Fluid Power Systems and Components - Connectors and Associated Components - Nominal Pressures First Revision |
|
|
IS 14528 : 1998 Reviewed In : 2024 |
Tube end straight reducers for oil - Hydraulic couplings |
|
|
IS 14740 (Part 1) : 2021 ISO 6358-1 : 2013 |
Pneumatic Fluid Power - Determination of Flow-Rate Characteristics of Components Using Compressible Fluids Part 1 General Rules and Test Methods for Steady-State Flow First Revision |
|
|
IS 14875 : 2000 Reviewed In : 2024 |
Compressed air filters - Evaluation parameters |
|
|
IS 14876 : 2020 |
Pneumatic Fluid Power Compressed-air lubricators Part 1 Main Characteristics to be Included in Supplier s Literature and Product-marking Requirements First Revision |
|
|
15045 : 2021 ISO 5599-1 : 2001 |
Pneumatic Fluid Power - Five-Port Directional Control Valves Part 1 Mounting Interface Surfaces without Electrical Connector First Revision |
|
|
15045 : 2021 ISO 5599-2 : 2001 |
Pneumatic Fluid Power - Five-Port Directional Control Valves Part 2 Mounting Interface Surfaces with Optional Electrical Connector First Revision |
|
|
IS 15045 (Part 3) : 2001 ISO 5599-3 Reviewed In : 2024 |
Pneumatic fluid power - Five port directional control valves Part 3 code system for communication of valve functions |
|
|
IS 15097 : 2002 ISO 6150 Reviewed In : 2024 |
Pneumatic fluid power - Cylindrical quick - Action couplings for maximum working pressures of 10 bar 16 bar and 25 bar 1 Mpa 1 6 Mpa And 2 5 Mpa - Plug connecting dimensions Specifications application guidelines and testing |
|
|
IS 15276 : 2002 ISO 8434-4 Reviewed In : 2024 |
Metallic tube connections for fluid power and general use 24 deg cone connectors with o - Ring weld - On nipples |
|
|
IS 15277 : 2002 ISO 8434-5 Reviewed In : 2024 |
Metallic tube connections for fluid power and general use test methods for threaded hydraulic fluid power connections |
|
|
IS 15332 : 2003 ISO 7285 Reviewed In : 2023 |
Pneumatic cylinders for mechanized multiple spot welding |
|
|
IS 15432 : 2003 ISO 7986 Reviewed In : 2023 |
Hydraulic fluid power - Sealing devices - Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications |
|
|
IS 15577 (Part 1) : 2005 ISO 9974-1 Reviewed In : 2020 |
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or Metal - to - Metal sealing Part 1 threaded ports |
|
|
IS 15577 (Part 2) : 2005 ISO 9974-2 Reviewed In : 2020 |
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or Metal - to - Metal sealing Part 2 stud ends with elastomeric sealing Type E |
|
|
IS 15577 (Part 3) : 2005 ISO 9974-3 Reviewed In : 2022 |
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or Metal - to - Metal sealing Part 3 stud ends with metal - To - Metal sealing Type B |
|
|
IS 17091 : 2023 ISO 14743 : 2020 |
Pneumatic Fluid Power Push-in Connectors for Thermoplastic Tubes |
|
|
IS 17215 : 2019 |
Fluid Power System Hexagon Socket Screw Plugs with Parallel Screw Threads with Elastomeric Sealing Specification |
|
|
IS 8208 : 2020 ISO 3320 : 2013 |
Fluid Power Systems and Components Cylinder Bores and Piston Rod Diameters and Area Ratios Metric Series Second Revision |
|
|
IS 8801 : 1978 Reviewed In : 2024 |
Specification for male stud coupling body for oil - Hydraulic couplings |
|
|
IS 8802 : 1987 Reviewed In : 2024 |
Specification for ferrules for oil hydraulic couplings First Revision |
|
|
IS 8803 : 1987 Reviewed In : 2024 |
Specification for coupling nuts for oil hydraulic system First Revision |
|
|
IS 8805 : 2002 Reviewed In : 2024 |
General requirements for ferrule type couplings used in oil hydraulic systems First Revision |
|
|
IS 9387 (Part 1) : 2018 Reviewed In : 2024 |
Specification for taper male stud elbow body for oil - Hydraulic c0upling Part 1 made from forgings zyxw |
|
|
IS 9387 (Part 2) : 2018 Reviewed In : 2024 |
Specification for taper male stud elbow body for oil - Hydraulic couplings Part 2 made from bar stock |
|
|
IS 9388 (Part 1) : 1979 Reviewed In : 2024 |
Specification for equal elbow body for oil - Hydraulic couplings Part 1 made from forgings |
|
|
IS 9388 (Part 2) : 2019 |
Equal elbow body for oil - Hydraulic couplings - Specification Part 2 made from bar stock First Revision |
|
|
IS 9389 (Part 1) : 2018 Reviewed In : 2024 |
Specification for - Equal tee - Body for oil - Hydraulic couplins Part 1 tee body made from forgings |
|
|
IS 9389 (Part 2) : 2018 Reviewed In : 2024 |
Specification for equal tee body for oil - Hydraulic couplings Part 2 made from bar stock |
|
|
IS 9390 : 2018 Reviewed In : 2024 |
Specification for straight coupling body for oil - Hydraulic couplings |
|
|
IS 9391 : 1980 Reviewed In : 2024 |
Specification for straight coupling assemblies for oil - Hydraulic systems |
|
|
IS 9392 : 1980 Reviewed In : 2024 |
Specification for taper male stud coupling body for oil - Hydraulic couplings |
|
|
IS 9411 : 1980 Reviewed In : 2024 |
Specification for elbow coupling assemblies for oil - Hydraulic systems |
|
|
IS 9412 (Part 1) : 2024 |
Male Stud Elbow Body for Oil - Hydraulic Couplings Specification Part 1 Made from Forgings |
|
|
IS 9412 (Part 2) : 1980 Reviewed In : 2018 |
Specification for male stud elbow body for oil - Hydraulic couplings Part 2 made from bar stock |
|
|
IS 9645 : 2005 Reviewed In : 2020 |
Hexagon socket pipe plugs First Revision |
|
|
IS 9724 (Part 1) : 1981 Reviewed In : 2024 |
Specification for taper male stud tee body Stud Branch for oil - Hydraulic couplings Part 1 made from forgings |
|
|
IS 9724 (Part 2) : 2024 |
Taper male stud tee body Stud branch for oil hydraulic couplings Specification Part 2 Made from bar stock first revision |
|
|
IS 9725 (Part 1) : 1981 Reviewed In : 2024 |
Specification for male stud tee body Stud Branch for oil - Hydraulic couplings Part 1 made from forgings |
|
|
IS 9725 (Part 2) : 2023 |
Male Stud Tee Body Stud Branch For Oil Hydraulic Couplings Specification Part 2 Made From Bar Stock |
|
|
IS 9746 (Part 1) : 2021 |
Equal Cross Body for Oil Hydraulic Coupling Specification Part 1 Made from Forgings |
|
|
IS 9746 (Part 2) : 1981 Reviewed In : 2018 |
Specification for equal cross body for oil - Hydraulic couplings Part 2 made from bar stock |
|
|
IS 9757 (Part 1) : 2023 |
Bulkhead Elbow Body for Oil Hydraulic Couplings Specification Part 1 Made from Forgings |
|
|
IS 9757 (Part 2) : 2024 |
Bulkhead Elbow Body or Oil Hydraulic Couplings Specification Part 2 Made from Bar Stock |
|
|
IS 9767 : 1981 Reviewed In : 2024 |
Specification for tee coupling assemblies for oil - Hydraulic systems |
|
|
IS 9768 : 2024 |
Bulkhead straight body for oil - Hydraulic Couplings Specification Second Revision |
|
|
IS 9769 : 1981 Reviewed In : 2024 |
Specification for bulkhead straight coupling assembly for oil - Hydraulic systems |
|
|
IS 9770 : 1981 Reviewed In : 2024 |
Specification for bulkhead elbow coupling assembly for oil - Hydraulic systems |